/* * PWM device driver for ST SoCs * * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited * * Author: Ajit Pal Singh * Lee Jones * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define PWM_OUT_VAL(x) (0x00 + (4 * (x))) /* Device's Duty Cycle register */ #define PWM_CPT_VAL(x) (0x10 + (4 * (x))) /* Capture value */ #define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */ #define STI_PWM_CTRL 0x50 /* Control/Config register */ #define STI_INT_EN 0x54 /* Interrupt Enable/Disable register */ #define STI_INT_STA 0x58 /* Interrupt Status register */ #define PWM_INT_ACK 0x5c #define PWM_PRESCALE_LOW_MASK 0x0f #define PWM_PRESCALE_HIGH_MASK 0xf0 #define PWM_CPT_EDGE_MASK 0x03 #define PWM_INT_ACK_MASK 0x1ff #define STI_MAX_CPT_DEVS 4 #define CPT_DC_MAX 0xff /* Regfield IDs */ enum { /* Bits in PWM_CTRL*/ PWMCLK_PRESCALE_LOW, PWMCLK_PRESCALE_HIGH, CPTCLK_PRESCALE, PWM_OUT_EN, PWM_CPT_EN, PWM_CPT_INT_EN, PWM_CPT_INT_STAT, /* Keep last */ MAX_REGFIELDS }; /* * Each capture input can be programmed to detect rising-edge, falling-edge, * either edge or neither egde. */ enum sti_cpt_edge { CPT_EDGE_DISABLED, CPT_EDGE_RISING, CPT_EDGE_FALLING, CPT_EDGE_BOTH, }; struct sti_cpt_ddata { u32 snapshot[3]; unsigned int index; struct mutex lock; wait_queue_head_t wait; }; struct sti_pwm_compat_data { const struct reg_field *reg_fields; unsigned int pwm_num_devs; unsigned int cpt_num_devs; unsigned int max_pwm_cnt; unsigned int max_prescale; }; struct sti_pwm_chip { struct device *dev; struct clk *pwm_clk; struct clk *cpt_clk; struct regmap *regmap; struct sti_pwm_compat_data *cdata; struct regmap_field *prescale_low; struct regmap_field *prescale_high; struct regmap_field *pwm_out_en; struct regmap_field *pwm_cpt_en; struct regmap_field *pwm_cpt_int_en; struct regmap_field *pwm_cpt_int_stat; struct pwm_chip chip; struct pwm_device *cur; unsigned long configured; unsigned int en_count; struct mutex sti_pwm_lock; /* To sync between enable/disable calls */ void __iomem *mmio; }; static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = { [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3), [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14), [CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8), [PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9), [PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10), [PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4), [PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4), }; static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip) { return container_of(chip, struct sti_pwm_chip, chip); } /* * Calculate the prescaler value corresponding to the period. */ static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period, unsigned int *prescale) { struct sti_pwm_compat_data *cdata = pc->cdata; unsigned long clk_rate; unsigned long value; unsigned int ps; clk_rate = clk_get_rate(pc->pwm_clk); if (!clk_rate) { dev_err(pc->dev, "failed to get clock rate\n"); return -EINVAL; } /* * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1 */ value = NSEC_PER_SEC / clk_rate; value *= cdata->max_pwm_cnt + 1; if (period % value) return -EINVAL; ps = period / value - 1; if (ps > cdata->max_prescale) return -EINVAL; *prescale = ps; return 0; } /* * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The * only way to change the period (apart from changing the PWM input clock) is * to change the PWM clock prescaler. * * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible * period values are supported (for a particular clock rate). The requested * period will be applied only if it matches one of these 256 values. */ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); struct sti_pwm_compat_data *cdata = pc->cdata; unsigned int ncfg, value, prescale = 0; struct pwm_device *cur = pc->cur; struct device *dev = pc->dev; bool period_same = false; int ret; ncfg = hweight_long(pc->configured); if (ncfg) period_same = (period_ns == pwm_get_period(cur)); /* * Allow configuration changes if one of the following conditions * satisfy. * 1. No devices have been configured. * 2. Only one device has been configured and the new request is for * the same device. * 3. Only one device has been configured and the new request is for * a new device and period of the new device is same as the current * configured period. * 4. More than one devices are configured and period of the new * requestis the same as the current period. */ if (!ncfg || ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) || ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) || ((ncfg > 1) && period_same)) { /* Enable clock before writing to PWM registers. */ ret = clk_enable(pc->pwm_clk); if (ret) return ret; ret = clk_enable(pc->cpt_clk); if (ret) return ret; if (!period_same) { ret = sti_pwm_get_prescale(pc, period_ns, &prescale); if (ret) goto clk_dis; value = prescale & PWM_PRESCALE_LOW_MASK; ret = regmap_field_write(pc->prescale_low, value); if (ret) goto clk_dis; value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4; ret = regmap_field_write(pc->prescale_high, value); if (ret) goto clk_dis; } /* * When PWMVal == 0, PWM pulse = 1 local clock cycle. * When PWMVal == max_pwm_count, * PWM pulse = (max_pwm_count + 1) local cycles, * that is continuous pulse: signal never goes low. */ value = cdata->max_pwm_cnt * duty_ns / period_ns; ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value); if (ret) goto clk_dis; ret = regmap_field_write(pc->pwm_cpt_int_en, 0); set_bit(pwm->hwpwm, &pc->configured); pc->cur = pwm; dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n", prescale, period_ns, duty_ns, value); } else { return -EINVAL; } clk_dis: clk_disable(pc->pwm_clk); clk_disable(pc->cpt_clk); return ret; } static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); struct device *dev = pc->dev; int ret = 0; /* * Since we have a common enable for all PWM devices, do not enable if * already enabled. */ mutex_lock(&pc->sti_pwm_lock); if (!pc->en_count) { ret = clk_enable(pc->pwm_clk); if (ret) goto out; ret = clk_enable(pc->cpt_clk); if (ret) goto out; ret = regmap_field_write(pc->pwm_out_en, 1); if (ret) { dev_err(dev, "failed to enable PWM device %u: %d\n", pwm->hwpwm, ret); goto out; } } pc->en_count++; out: mutex_unlock(&pc->sti_pwm_lock); return ret; } static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); mutex_lock(&pc->sti_pwm_lock); if (--pc->en_count) { mutex_unlock(&pc->sti_pwm_lock); return; } regmap_field_write(pc->pwm_out_en, 0); clk_disable(pc->pwm_clk); clk_disable(pc->cpt_clk); mutex_unlock(&pc->sti_pwm_lock); } static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); clear_bit(pwm->hwpwm, &pc->configured); } static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_capture *result, unsigned long timeout) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); struct sti_pwm_compat_data *cdata = pc->cdata; struct sti_cpt_ddata *ddata = pwm_get_chip_data(pwm); struct device *dev = pc->dev; unsigned int effective_ticks; unsigned long long high, low; int ret; if (pwm->hwpwm >= cdata->cpt_num_devs) { dev_err(dev, "device %u is not valid\n", pwm->hwpwm); return -EINVAL; } mutex_lock(&ddata->lock); ddata->index = 0; /* Prepare capture measurement */ regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING); regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm)); /* Enable capture */ ret = regmap_field_write(pc->pwm_cpt_en, 1); if (ret) { dev_err(dev, "failed to enable PWM capture %u: %d\n", pwm->hwpwm, ret); goto out; } ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1, msecs_to_jiffies(timeout)); regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED); if (ret == -ERESTARTSYS) goto out; switch (ddata->index) { case 0: case 1: /* * Getting here could mean: * - input signal is constant of less than 1 Hz * - there is no input signal at all * * In such case the frequency is rounded down to 0 */ result->period = 0; result->duty_cycle = 0; break; case 2: /* We have everying we need */ high = ddata->snapshot[1] - ddata->snapshot[0]; low = ddata->snapshot[2] - ddata->snapshot[1]; effective_ticks = clk_get_rate(pc->cpt_clk); result->period = (high + low) * NSEC_PER_SEC; result->period = do_div(result->period, effective_ticks); result->duty_cycle = high * NSEC_PER_SEC; result->duty_cycle = do_div(result->duty_cycle, effective_ticks); break; default: dev_err(dev, "internal error\n"); break; } out: /* Disable capture */ regmap_field_write(pc->pwm_cpt_en, 0); mutex_unlock(&ddata->lock); return ret; } static const struct pwm_ops sti_pwm_ops = { .capture = sti_pwm_capture, .config = sti_pwm_config, .enable = sti_pwm_enable, .disable = sti_pwm_disable, .free = sti_pwm_free, .owner = THIS_MODULE, }; static irqreturn_t sti_pwm_interrupt(int irq, void *data) { struct sti_pwm_chip *pc = data; struct device *dev = pc->dev; struct sti_cpt_ddata *ddata; int devicenum; unsigned int cpt_int_stat; unsigned int reg; int ret = IRQ_NONE; ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat); if (ret) return ret; while (cpt_int_stat) { devicenum = ffs(cpt_int_stat) - 1; ddata = pwm_get_chip_data(&pc->chip.pwms[devicenum]); /* * Capture input: * _______ _______ * | | | | * __| |_________________| |________ * ^0 ^1 ^2 * * Capture start by the first available rising edge. When a * capture event occurs, capture value (CPT_VALx) is stored, * index incremented, capture edge changed. * * After the capture, if the index > 1, we have collected the * necessary data so we signal the thread waiting for it and * disable the capture by setting capture edge to none */ regmap_read(pc->regmap, PWM_CPT_VAL(devicenum), &ddata->snapshot[ddata->index]); switch (ddata->index) { case 0: case 1: regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), ®); reg ^= PWM_CPT_EDGE_MASK; regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg); ddata->index++; break; case 2: regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), CPT_EDGE_DISABLED); wake_up(&ddata->wait); break; default: dev_err(dev, "Internal error\n"); } cpt_int_stat &= ~BIT_MASK(devicenum); ret = IRQ_HANDLED; } /* Just ACK everything */ regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK); return ret; } static int sti_pwm_probe_dt(struct sti_pwm_chip *pc) { struct device *dev = pc->dev; const struct reg_field *reg_fields; struct device_node *np = dev->of_node; struct sti_pwm_compat_data *cdata = pc->cdata; u32 num_devs; int ret; ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs); if (!ret) cdata->pwm_num_devs = num_devs; ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs); if (!ret) cdata->cpt_num_devs = num_devs; if (!cdata->pwm_num_devs && !cdata->cpt_num_devs) { dev_err(dev, "No channels configured\n"); return -EINVAL; } reg_fields = cdata->reg_fields; pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWMCLK_PRESCALE_LOW]); if (IS_ERR(pc->prescale_low)) return PTR_ERR(pc->prescale_low); pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWMCLK_PRESCALE_HIGH]); if (IS_ERR(pc->prescale_high)) return PTR_ERR(pc->prescale_high); pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWM_OUT_EN]); if (IS_ERR(pc->pwm_out_en)) return PTR_ERR(pc->pwm_out_en); pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWM_CPT_EN]); if (IS_ERR(pc->pwm_cpt_en)) return PTR_ERR(pc->pwm_cpt_en); pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWM_CPT_INT_EN]); if (IS_ERR(pc->pwm_cpt_int_en)) return PTR_ERR(pc->pwm_cpt_int_en); pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWM_CPT_INT_STAT]); if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat)) return PTR_ERR(pc->pwm_cpt_int_stat); return 0; } static const struct regmap_config sti_pwm_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, }; static int sti_pwm_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct sti_pwm_compat_data *cdata; struct sti_pwm_chip *pc; struct resource *res; unsigned int i; int irq, ret; pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); if (!pc) return -ENOMEM; cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL); if (!cdata) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pc->mmio = devm_ioremap_resource(dev, res); if (IS_ERR(pc->mmio)) return PTR_ERR(pc->mmio); pc->regmap = devm_regmap_init_mmio(dev, pc->mmio, &sti_pwm_regmap_config); if (IS_ERR(pc->regmap)) return PTR_ERR(pc->regmap); irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "Failed to obtain IRQ\n"); return irq; } ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0, pdev->name, pc); if (ret < 0) { dev_err(&pdev->dev, "Failed to request IRQ\n"); return ret; } /* * Setup PWM data with default values: some values could be replaced * with specific ones provided from Device Tree. */ cdata->reg_fields = sti_pwm_regfields; cdata->max_prescale = 0xff; cdata->max_pwm_cnt = 255; cdata->pwm_num_devs = 0; cdata->cpt_num_devs = 0; pc->cdata = cdata; pc->dev = dev; pc->en_count = 0; mutex_init(&pc->sti_pwm_lock); ret = sti_pwm_probe_dt(pc); if (ret) return ret; if (!cdata->pwm_num_devs) goto skip_pwm; pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm"); if (IS_ERR(pc->pwm_clk)) { dev_err(dev, "failed to get PWM clock\n"); return PTR_ERR(pc->pwm_clk); } ret = clk_prepare(pc->pwm_clk); if (ret) { dev_err(dev, "failed to prepare clock\n"); return ret; } skip_pwm: if (!cdata->cpt_num_devs) goto skip_cpt; pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture"); if (IS_ERR(pc->cpt_clk)) { dev_err(dev, "failed to get PWM capture clock\n"); return PTR_ERR(pc->cpt_clk); } ret = clk_prepare(pc->cpt_clk); if (ret) { dev_err(dev, "failed to prepare clock\n"); return ret; } skip_cpt: pc->chip.dev = dev; pc->chip.ops = &sti_pwm_ops; pc->chip.base = -1; pc->chip.npwm = pc->cdata->pwm_num_devs; ret = pwmchip_add(&pc->chip); if (ret < 0) { clk_unprepare(pc->pwm_clk); clk_unprepare(pc->cpt_clk); return ret; } for (i = 0; i < cdata->cpt_num_devs; i++) { struct sti_cpt_ddata *ddata; ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); if (!ddata) return -ENOMEM; init_waitqueue_head(&ddata->wait); mutex_init(&ddata->lock); pwm_set_chip_data(&pc->chip.pwms[i], ddata); } platform_set_drvdata(pdev, pc); return 0; } static int sti_pwm_remove(struct platform_device *pdev) { struct sti_pwm_chip *pc = platform_get_drvdata(pdev); unsigned int i; for (i = 0; i < pc->cdata->pwm_num_devs; i++) pwm_disable(&pc->chip.pwms[i]); clk_unprepare(pc->pwm_clk); clk_unprepare(pc->cpt_clk); return pwmchip_remove(&pc->chip); } static const struct of_device_id sti_pwm_of_match[] = { { .compatible = "st,sti-pwm", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sti_pwm_of_match); static struct platform_driver sti_pwm_driver = { .driver = { .name = "sti-pwm", .of_match_table = sti_pwm_of_match, }, .probe = sti_pwm_probe, .remove = sti_pwm_remove, }; module_platform_driver(sti_pwm_driver); MODULE_AUTHOR("Ajit Pal Singh "); MODULE_DESCRIPTION("STMicroelectronics ST PWM driver"); MODULE_LICENSE("GPL");