/* * linux/include/linux/mmc/core.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef LINUX_MMC_CORE_H #define LINUX_MMC_CORE_H #include #include struct mmc_data; struct mmc_request; enum mmc_blk_status { MMC_BLK_SUCCESS = 0, MMC_BLK_PARTIAL, MMC_BLK_CMD_ERR, MMC_BLK_RETRY, MMC_BLK_ABORT, MMC_BLK_DATA_ERR, MMC_BLK_ECC_ERR, MMC_BLK_NOMEDIUM, MMC_BLK_NEW_REQUEST, }; struct mmc_command { u32 opcode; u32 arg; #define MMC_CMD23_ARG_REL_WR (1 << 31) #define MMC_CMD23_ARG_PACKED ((0 << 31) | (1 << 30)) #define MMC_CMD23_ARG_TAG_REQ (1 << 29) u32 resp[4]; unsigned int flags; /* expected response type */ #define MMC_RSP_PRESENT (1 << 0) #define MMC_RSP_136 (1 << 1) /* 136 bit response */ #define MMC_RSP_CRC (1 << 2) /* expect valid crc */ #define MMC_RSP_BUSY (1 << 3) /* card may send busy */ #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ #define MMC_CMD_MASK (3 << 5) /* non-SPI command type */ #define MMC_CMD_AC (0 << 5) #define MMC_CMD_ADTC (1 << 5) #define MMC_CMD_BC (2 << 5) #define MMC_CMD_BCR (3 << 5) #define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */ #define MMC_RSP_SPI_S2 (1 << 8) /* second byte */ #define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */ #define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */ /* * These are the native response types, and correspond to valid bit * patterns of the above flags. One additional valid pattern * is all zeros, which means we don't expect a response. */ #define MMC_RSP_NONE (0) #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY) #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) #define MMC_RSP_R3 (MMC_RSP_PRESENT) #define MMC_RSP_R4 (MMC_RSP_PRESENT) #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) /* Can be used by core to poll after switch to MMC HS mode */ #define MMC_RSP_R1_NO_CRC (MMC_RSP_PRESENT|MMC_RSP_OPCODE) #define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE)) /* * These are the SPI response types for MMC, SD, and SDIO cards. * Commands return R1, with maybe more info. Zero is an error type; * callers must always provide the appropriate MMC_RSP_SPI_Rx flags. */ #define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1) #define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY) #define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2) #define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4) #define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4) #define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2) #define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4) #define mmc_spi_resp_type(cmd) ((cmd)->flags & \ (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4)) /* * These are the command types. */ #define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK) unsigned int retries; /* max number of retries */ int error; /* command error */ /* * Standard errno values are used for errors, but some have specific * meaning in the MMC layer: * * ETIMEDOUT Card took too long to respond * EILSEQ Basic format problem with the received or sent data * (e.g. CRC check failed, incorrect opcode in response * or bad end bit) * EINVAL Request cannot be performed because of restrictions * in hardware and/or the driver * ENOMEDIUM Host can determine that the slot is empty and is * actively failing requests */ unsigned int busy_timeout; /* busy detect timeout in ms */ /* Set this flag only for blocking sanitize request */ bool sanitize_busy; struct mmc_data *data; /* data segment associated with cmd */ struct mmc_request *mrq; /* associated request */ }; struct mmc_data { unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */ unsigned int timeout_clks; /* data timeout (in clocks) */ unsigned int blksz; /* data block size */ unsigned int blocks; /* number of blocks */ unsigned int blk_addr; /* block address */ int error; /* data error */ unsigned int flags; #define MMC_DATA_WRITE BIT(8) #define MMC_DATA_READ BIT(9) /* Extra flags used by CQE */ #define MMC_DATA_QBR BIT(10) /* CQE queue barrier*/ #define MMC_DATA_PRIO BIT(11) /* CQE high priority */ #define MMC_DATA_REL_WR BIT(12) /* Reliable write */ #define MMC_DATA_DAT_TAG BIT(13) /* Tag request */ #define MMC_DATA_FORCED_PRG BIT(14) /* Forced programming */ unsigned int bytes_xfered; struct mmc_command *stop; /* stop command */ struct mmc_request *mrq; /* associated request */ unsigned int sg_len; /* size of scatter list */ int sg_count; /* mapped sg entries */ struct scatterlist *sg; /* I/O scatter list */ s32 host_cookie; /* host private data */ }; struct mmc_host; struct mmc_request { struct mmc_command *sbc; /* SET_BLOCK_COUNT for multiblock */ struct mmc_command *cmd; struct mmc_data *data; struct mmc_command *stop; #ifdef CONFIG_MTK_EMMC_CQ_SUPPORT struct mmc_async_req *areq; int flags; struct list_head link; struct list_head hlist; #endif struct request *req; #if defined(CONFIG_MTK_HW_FDE) || defined(CONFIG_MMC_CRYPTO) bool is_mmc_req; /* request is from mmc layer */ #endif struct completion completion; struct completion cmd_completion; void (*done)(struct mmc_request *);/* completion function */ /* * Notify uppers layers (e.g. mmc block driver) that recovery is needed * due to an error associated with the mmc_request. Currently used only * by CQE. */ void (*recovery_notifier)(struct mmc_request *); struct mmc_host *host; /* Allow other commands during this ongoing data transfer or busy wait */ bool cap_cmd_during_tfr; int tag; #ifdef CONFIG_MMC_CRYPTO int crypto_key_slot; u64 data_unit_num; const struct blk_crypto_key *crypto_key; #endif }; #ifdef CONFIG_MMC_CRYPTO static inline bool mmc_request_crypto_enabled(const struct mmc_request *mrq) { return mrq->crypto_key != NULL; } #else static inline bool mmc_request_crypto_enabled(const struct mmc_request *mrq) { return false; } #endif struct mmc_card; void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq); int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries); int mmc_hw_reset(struct mmc_host *host); int mmc_sw_reset(struct mmc_host *host); void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); #endif /* LINUX_MMC_CORE_H */