// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2014 Goodix Technology. */ #include "gt1x_tpd_common.h" #if TPD_SUPPORT_I2C_DMA #include #endif #ifdef CONFIG_GTP_ICS_SLOT_REPORT #include #endif #include #include #include #include /*1 enable,0 disable,touch_panel_eint default status, * need to confirm after register eint */ int irq_flag = 1; static spinlock_t irq_flag_lock; /*0 power off,default, 1 power on*/ static int power_flag; static int tpd_flag; static int tpd_pm_flag; static int tpd_tui_flag; static int tpd_tui_low_power_skipped; DEFINE_MUTEX(tui_lock); int tpd_halt; static int tpd_eint_mode = 1; static struct task_struct *thread; static struct task_struct *update_thread; static struct task_struct *probe_thread; static struct notifier_block pm_notifier_block; struct pinctrl *pinctrl1; struct pinctrl_state *pins_default; struct pinctrl_state *eint_as_int, *eint_output0, *eint_output1, *rst_output0, *pin_i2c_mode, *rst_output1; static int tpd_polling_time = 50; static DECLARE_WAIT_QUEUE_HEAD(waiter); static DECLARE_WAIT_QUEUE_HEAD(pm_waiter); static bool gtp_suspend; DECLARE_WAIT_QUEUE_HEAD(init_waiter); DEFINE_MUTEX(i2c_access); unsigned int touch_irq; u8 int_type; #if (defined(TPD_WARP_START) && defined(TPD_WARP_END)) static int tpd_wb_start_local[TPD_WARP_CNT] = TPD_WARP_START; static int tpd_wb_end_local[TPD_WARP_CNT] = TPD_WARP_END; #endif #if (defined(TPD_HAVE_CALIBRATION) && !defined(TPD_CUSTOM_CALIBRATION)) static int tpd_def_calmat_local[8] = TPD_CALIBRATION_MATRIX; #endif static int tpd_event_handler(void *unused); static int tpd_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id); static int tpd_i2c_detect(struct i2c_client *client, struct i2c_board_info *info); static int tpd_i2c_remove(struct i2c_client *client); static irqreturn_t tpd_eint_interrupt_handler(int irq, void *desc); #define GTP_DRIVER_NAME "gt1151" static const struct i2c_device_id tpd_i2c_id[] = { {GTP_DRIVER_NAME, 0}, {} }; static unsigned short force[] = { 0, GTP_I2C_ADDRESS, I2C_CLIENT_END, I2C_CLIENT_END }; static const unsigned short *const forces[] = { force, NULL }; static const struct of_device_id tpd_of_match[] = { {.compatible = "goodix,gt1151"}, {}, }; static struct i2c_driver tpd_i2c_driver = { .probe = tpd_i2c_probe, .remove = tpd_i2c_remove, .detect = tpd_i2c_detect, .driver.name = GTP_DRIVER_NAME, .driver = { .name = GTP_DRIVER_NAME, .of_match_table = tpd_of_match, }, .id_table = tpd_i2c_id, .address_list = (const unsigned short *)forces, }; #if TPD_SUPPORT_I2C_DMA static u8 *gpDMABuf_va; static dma_addr_t gpDMABuf_pa; struct mutex dma_mutex; DEFINE_MUTEX(dma_mutex); static s32 i2c_dma_write_mtk(u16 addr, u8 *buffer, s32 len) { s32 ret = 0; s32 pos = 0; s32 transfer_length; u16 address = addr; struct i2c_msg msg = { .flags = !I2C_M_RD, .ext_flag = (gt1x_i2c_client->ext_flag | I2C_ENEXT_FLAG | I2C_DMA_FLAG), .addr = (gt1x_i2c_client->addr & I2C_MASK_FLAG), .timing = I2C_MASTER_CLOCK, .buf = (u8 *)(uintptr_t)gpDMABuf_pa, }; mutex_lock(&dma_mutex); while (pos != len) { if (len - pos > (IIC_DMA_MAX_TRANSFER_SIZE - GTP_ADDR_LENGTH)) transfer_length = IIC_DMA_MAX_TRANSFER_SIZE - GTP_ADDR_LENGTH; else transfer_length = len - pos; gpDMABuf_va[0] = (address >> 8) & 0xFF; gpDMABuf_va[1] = address & 0xFF; memcpy(&gpDMABuf_va[GTP_ADDR_LENGTH], &buffer[pos], transfer_length); msg.len = transfer_length + GTP_ADDR_LENGTH; if (!gtp_suspend) {/*workround log too much*/ ret = i2c_transfer(gt1x_i2c_client->adapter, &msg, 1); if (ret != 1) { GTP_INFO("I2c Transfer error! (%d)", ret); ret = ERROR_IIC; break; } } else { ret = ERROR_IIC; break; } ret = 0; pos += transfer_length; address += transfer_length; } mutex_unlock(&dma_mutex); return ret; } static s32 i2c_dma_read_mtk(u16 addr, u8 *buffer, s32 len) { s32 ret = ERROR; s32 pos = 0; s32 transfer_length; u16 address = addr; u8 addr_buf[GTP_ADDR_LENGTH] = { 0 }; struct i2c_msg msgs[2] = { { .flags = 0, /*!I2C_M_RD,*/ .addr = (gt1x_i2c_client->addr & I2C_MASK_FLAG), .timing = I2C_MASTER_CLOCK, .len = GTP_ADDR_LENGTH, .buf = addr_buf, }, { .flags = I2C_M_RD, .ext_flag = (gt1x_i2c_client->ext_flag | I2C_ENEXT_FLAG | I2C_DMA_FLAG), .addr = (gt1x_i2c_client->addr & I2C_MASK_FLAG), .timing = I2C_MASTER_CLOCK, .buf = (u8 *)(uintptr_t)gpDMABuf_pa, }, }; mutex_lock(&dma_mutex); while (pos != len) { if (len - pos > IIC_DMA_MAX_TRANSFER_SIZE) transfer_length = IIC_DMA_MAX_TRANSFER_SIZE; else transfer_length = len - pos; msgs[0].buf[0] = (address >> 8) & 0xFF; msgs[0].buf[1] = address & 0xFF; msgs[1].len = transfer_length; ret = i2c_transfer(gt1x_i2c_client->adapter, msgs, 2); if (ret != 2) { GTP_ERROR("I2C Transfer error! (%d)", ret); ret = ERROR_IIC; break; } ret = 0; memcpy(&buffer[pos], gpDMABuf_va, transfer_length); pos += transfer_length; address += transfer_length; }; mutex_unlock(&dma_mutex); return ret; } #else static s32 i2c_write_mtk(u16 addr, u8 *buffer, s32 len) { s32 ret; struct i2c_msg msg = { .flags = 0, #ifdef CONFIG_MTK_I2C_EXTENSION .addr = (gt1x_i2c_client->addr & I2C_MASK_FLAG) | (I2C_ENEXT_FLAG), .timing = I2C_MASTER_CLOCK, #else .addr = gt1x_i2c_client->addr, #endif }; ret = _do_i2c_write(&msg, addr, buffer, len); return ret; } static s32 i2c_read_mtk(u16 addr, u8 *buffer, s32 len) { int ret; u8 addr_buf[GTP_ADDR_LENGTH] = { (addr >> 8) & 0xFF, addr & 0xFF }; struct i2c_msg msgs[2] = { { #ifdef CONFIG_MTK_I2C_EXTENSION .addr = ((gt1x_i2c_client->addr & I2C_MASK_FLAG) | (I2C_ENEXT_FLAG)), .timing = I2C_MASTER_CLOCK, #else .addr = gt1x_i2c_client->addr, #endif .flags = 0, .buf = addr_buf, .len = GTP_ADDR_LENGTH, }, { #ifdef CONFIG_MTK_I2C_EXTENSION .addr = ((gt1x_i2c_client->addr & I2C_MASK_FLAG) | (I2C_ENEXT_FLAG)), .timing = I2C_MASTER_CLOCK, #else .addr = gt1x_i2c_client->addr, #endif .flags = I2C_M_RD, }, }; ret = _do_i2c_read(msgs, addr, buffer, len); return ret; } #endif/* TPD_SUPPORT_I2C_DMA */ /** * @return: return 0 if success, otherwise return a negative number * which contains the error code. */ s32 gt1x_i2c_read(u16 addr, u8 *buffer, s32 len) { #if TPD_SUPPORT_I2C_DMA return i2c_dma_read_mtk(addr, buffer, len); #else return i2c_read_mtk(addr, buffer, len); #endif } /** * @return: return 0 if success, otherwise return a negative number * which contains the error code. */ s32 gt1x_i2c_write(u16 addr, u8 *buffer, s32 len) { #if TPD_SUPPORT_I2C_DMA return i2c_dma_write_mtk(addr, buffer, len); #else return i2c_write_mtk(addr, buffer, len); #endif } #ifdef TPD_REFRESH_RATE /******************************************************* * Function: * Write refresh rate * * Input: * rate: refresh rate N (Duration=5+N ms, N=0~15) * * Output: * Executive outcomes.0---succeed. *******************************************************/ static u8 gt1x_set_refresh_rate(u8 rate) { u8 buf[1] = { rate }; if (rate > 0xf) { GTP_ERROR("Refresh rate is over range (%d)", rate); return ERROR_VALUE; } GTP_INFO("Refresh rate change to %d", rate); return gt1x_i2c_write(GTP_REG_REFRESH_RATE, buf, sizeof(buf)); } /******************************************************* * Function: * Get refresh rate * * Output: * Refresh rate or error code *******************************************************/ static u8 gt1x_get_refresh_rate(void) { int ret; u8 buf[1] = { 0x00 }; ret = gt1x_i2c_read(GTP_REG_REFRESH_RATE, buf, sizeof(buf)); if (ret < 0) return ret; GTP_INFO("Refresh rate is %d", buf[0]); return buf[0]; } /*=============================================================*/ static ssize_t tpd_refresh_rate_show(struct device *dev, struct device_attribute *attr, char *buf) { int ret = gt1x_get_refresh_rate(); if (ret < 0) return 0; else return sprintf(buf, "%d\n", ret); } static ssize_t tpd_refresh_rate_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { unsigned long rate; int ret; ret = kstrtoul(buf, 0, &rate); gt1x_set_refresh_rate(rate); return size; } static DEVICE_ATTR_RW(tpd_refresh_rate); static struct device_attribute *gt9xx_attrs[] = { &dev_attr_tpd_refresh_rate, }; #endif /*=============================================================*/ static int tpd_i2c_detect(struct i2c_client *client, struct i2c_board_info *info) { strncpy(info->type, "mtk-tpd", sizeof(info->type)); return 0; } static DEFINE_MUTEX(tpd_set_gpio_mutex); void tpd_gpio_as_int(int pin) { mutex_lock(&tpd_set_gpio_mutex); GTP_INFO("[tpd] %s\n", __func__); if (pin == 1) pinctrl_select_state(pinctrl1, eint_as_int); mutex_unlock(&tpd_set_gpio_mutex); } void tpd_gpio_output(int pin, int level) { mutex_lock(&tpd_set_gpio_mutex); GTP_DEBUG("%s pin = EINT, level = %d\n", __func__, level); if (pin == 1) { if (level) pinctrl_select_state(pinctrl1, eint_output1); else pinctrl_select_state(pinctrl1, eint_output0); } else { if (level) pinctrl_select_state(pinctrl1, rst_output1); else pinctrl_select_state(pinctrl1, rst_output0); } mutex_unlock(&tpd_set_gpio_mutex); } int tpd_get_pinctrl(struct i2c_client *client) { int ret; GTP_INFO("[tpd] mt_tpd_pinctrl+\n"); pinctrl1 = devm_pinctrl_get(client->adapter->dev.parent); if (IS_ERR(pinctrl1)) { ret = PTR_ERR(pinctrl1); GTP_ERROR("Cannot find pinctrl1!\n"); return ret; } pins_default = pinctrl_lookup_state(pinctrl1, "default"); if (IS_ERR(pins_default)) { ret = PTR_ERR(pins_default); GTP_INFO("Cannot find pinctrl default %d!\n", ret); } /* default i2c mode */ pin_i2c_mode = pinctrl_lookup_state(pinctrl1, "ts_i2c_mode"); if (IS_ERR(pin_i2c_mode)) { ret = PTR_ERR(pin_i2c_mode); GTP_ERROR("Failed to get pinctrl state:%s, ret:%d", "ts_i2c_mode", ret); } eint_as_int = pinctrl_lookup_state(pinctrl1, "ts_int_active"); if (IS_ERR(eint_as_int)) { ret = PTR_ERR(eint_as_int); GTP_ERROR("Cannot find pinctrl ts_int_active!\n"); return ret; } eint_output0 = pinctrl_lookup_state(pinctrl1, "ts_int_suspend"); if (IS_ERR(eint_output0)) { ret = PTR_ERR(eint_output0); GTP_ERROR("Cannot find pinctrl ts_int_suspend!\n"); return ret; } eint_output1 = pinctrl_lookup_state(pinctrl1, "ts_eint_high"); if (IS_ERR(eint_output1)) { ret = PTR_ERR(eint_output1); GTP_ERROR("Cannot find pinctrl ts_eint_high!\n"); return ret; } if (tpd_dts_data.tpd_use_ext_gpio == false) { rst_output0 = pinctrl_lookup_state(pinctrl1, "ts_reset_suspend"); if (IS_ERR(rst_output0)) { ret = PTR_ERR(rst_output0); GTP_ERROR("Cannot find pinctrl ts_reset_suspend!\n"); return ret; } rst_output1 = pinctrl_lookup_state(pinctrl1, "ts_reset_active"); if (IS_ERR(rst_output1)) { ret = PTR_ERR(rst_output1); GTP_ERROR("Cannot find pinctrl ts_reset_active!\n"); return ret; } } GTP_INFO("[tpd] mt_tpd_pinctrl-\n"); return 0; } static int tpd_power_on(void) { gt1x_power_switch(SWITCH_ON); gt1x_select_addr(); msleep(20); if (gt1x_get_chip_type() != 0) return -1; if (gt1x_reset_guitar() != 0) return -1; return 0; } void gt1x_irq_enable(void) { unsigned long flags; spin_lock_irqsave(&irq_flag_lock, flags); if (irq_flag == 0) { irq_flag = 1; spin_unlock_irqrestore(&irq_flag_lock, flags); enable_irq(touch_irq); GTP_DEBUG("%s, irq_flag=%d", __func__, irq_flag); } else if (irq_flag == 1) { spin_unlock_irqrestore(&irq_flag_lock, flags); GTP_INFO("Touch Eint already enabled!"); } else { spin_unlock_irqrestore(&irq_flag_lock, flags); GTP_ERROR("Invalid irq_flag %d!", irq_flag); } /*GTP_INFO("Enable irq_flag=%d",irq_flag);*/ } void gt1x_irq_disable(void) { unsigned long flags; spin_lock_irqsave(&irq_flag_lock, flags); if (irq_flag == 1) { irq_flag = 0; spin_unlock_irqrestore(&irq_flag_lock, flags); disable_irq(touch_irq); GTP_DEBUG("%s, irq_flag=%d", __func__, irq_flag); } else if (irq_flag == 0) { spin_unlock_irqrestore(&irq_flag_lock, flags); GTP_INFO("Touch Eint already disabled!"); } else { spin_unlock_irqrestore(&irq_flag_lock, flags); GTP_ERROR("Invalid irq_flag %d!", irq_flag); } /*GTP_INFO("Disable irq_flag=%d",irq_flag);*/ } void gt1x_power_off(void) { int ret = 0; if (power_flag == 1) { GTP_INFO("Power switch off!"); /*disable regulator*/ ret = regulator_disable(tpd->reg); if (ret) GTP_ERROR("regulator_disable() failed!\n"); power_flag = 0; } } void gt1x_power_switch(s32 state) { int ret = 0; GTP_GPIO_OUTPUT(GTP_RST_PORT, 0); GTP_GPIO_OUTPUT(GTP_INT_PORT, 0); msleep(20); switch (state) { case SWITCH_ON: if (power_flag == 0) { GTP_INFO("Power switch on!"); /*enable regulator*/ ret = regulator_enable(tpd->reg); if (ret) GTP_ERROR("regulator_enable() failed!\n"); power_flag = 1; } else GTP_DEBUG("Power already is on!"); break; case SWITCH_OFF: if (power_flag == 1) { GTP_INFO("Power switch off!"); /*disable regulator*/ ret = regulator_disable(tpd->reg); if (ret) GTP_ERROR("regulator_disable() failed!\n"); power_flag = 0; } else GTP_INFO("Power already is off!"); break; default: GTP_ERROR("Invalid power switch command!"); break; } } int gt1x_is_tpd_halt(void) { return tpd_halt; } static int tpd_irq_registration(void) { struct device_node *node = NULL; int ret = 0; u32 ints[2] = { 0, 0 }; GTP_INFO("Device Tree Tpd_irq_registration!"); node = of_find_matching_node(node, touch_of_match); if (node) { if (of_property_read_u32_array(node, "debounce", ints, ARRAY_SIZE(ints)) == 0) { GTP_INFO("debounce:%d-%d\n", ints[0], ints[1]); gpio_set_debounce(ints[0], ints[1]); } else GTP_INFO("debounce time not found\n"); touch_irq = irq_of_parse_and_map(node, 0); GTP_INFO("Device gt1x_int_type = %d!", gt1x_int_type); if (!gt1x_int_type) {/*EINTF_TRIGGER*/ ret = request_irq(touch_irq, (irq_handler_t) tpd_eint_interrupt_handler, IRQF_TRIGGER_RISING, "TOUCH_PANEL-eint", NULL); if (ret > 0) { ret = -1; GTP_ERROR("request_irq IRQ NOT AVAILABLE!."); } } else { ret = request_irq(touch_irq, (irq_handler_t) tpd_eint_interrupt_handler, IRQF_TRIGGER_FALLING, "TOUCH_PANEL-eint", NULL); if (ret > 0) { ret = -1; GTP_ERROR("request_irq IRQ NOT AVAILABLE!."); } } } else { GTP_ERROR("can not find touch eint device node!."); ret = -1; } GTP_INFO("[%s]irq:%d", __func__, touch_irq); return ret; } void gt1x_auto_update_done(void) { tpd_pm_flag = 1; wake_up(&pm_waiter); } static int gt1x_ts_gpio_setup(void) { int ret = 0; GTP_INFO("GPIO setup,reset-gpio:%d, irq-gpio:%d", tpd_dts_data.rst_gpio_num, tpd_dts_data.eint_gpio_num); if (gpio_is_valid(tpd_dts_data.rst_gpio_num)) { ret = gpio_request(tpd_dts_data.rst_gpio_num, "goodix,reset-gpio"); if (ret < 0) { GTP_ERROR("Failed to request reset gpio, ret:%d", ret); goto err_request_reset_gpio; } } if (gpio_is_valid(tpd_dts_data.eint_gpio_num)) { ret = gpio_request(tpd_dts_data.eint_gpio_num, "goodix,eint-gpio"); if (ret < 0) { GTP_ERROR("Failed to request irq gpio, ret:%d", ret); goto err_request_eint_gpio; } } return ret; err_request_eint_gpio: gpio_free(tpd_dts_data.rst_gpio_num); err_request_reset_gpio: return ret; } static int gt1x_ts_power_init(void) { int ret = 0; GTP_INFO("Power init"); /* dev:i2c client device or spi slave device*/ tpd->reg = devm_regulator_get(tpd->tpd_dev, "vtouch"); if (IS_ERR(tpd->reg)) { GTP_ERROR("regulator_get() failed!\n"); tpd->reg = NULL; return PTR_ERR(tpd->reg); } /*set 2.8v*/ ret = regulator_set_voltage(tpd->reg, 3000000, 3000000); if (ret) GTP_ERROR("regulator_set_voltage(%d) failed!\n", ret); return ret; } #ifdef GTP_AUTO_UPDATE int gt1x_pm_notifier(struct notifier_block *nb, unsigned long val, void *ign) { switch (val) { case PM_RESTORE_PREPARE: GTP_INFO("%s: PM_RESTORE_PREPARE enter\n", __func__); if (!IS_ERR(update_thread) && update_thread) wait_event(waiter, tpd_pm_flag == 1); GTP_INFO("%s: PM_RESTORE_PREPARE leave\n", __func__); return NOTIFY_DONE; } return NOTIFY_OK; } #endif int tpd_reregister_from_tui(void) { int ret = 0; free_irq(touch_irq, NULL); ret = tpd_irq_registration(); if (ret < 0) { ret = -1; GTP_INFO("tpd request_irq IRQ LINE NOT AVAILABLE!."); } return ret; } static int tpd_registration(void *client) { s32 err = 0; s32 idx = 0; gt1x_i2c_client = client; GTP_INFO(" start %s ++\n", __func__); tpd_get_pinctrl(client); err = pinctrl_select_state(pinctrl1, pin_i2c_mode); if (err < 0) GTP_ERROR("Failed to select default pinstate, err:%d", err); gt1x_power_switch(SWITCH_ON); /* select i2c address */ gt1x_select_addr(); if (gt1x_init()) { /* TP resolution == LCD resolution, * no need to match resolution when initialized fail */ gt1x_abs_x_max = 0; gt1x_abs_y_max = 0; gt1x_power_off(); wake_up(&init_waiter); GTP_INFO("gt1x_init failed!++"); return -1; } thread = kthread_run(tpd_event_handler, 0, TPD_DEVICE); if (IS_ERR(thread)) { err = PTR_ERR(thread); GTP_INFO(" failed to create kernel thread: %d\n", err); } if (tpd_dts_data.use_tpd_button) { for (idx = 0; idx < tpd_dts_data.tpd_key_num; idx++) input_set_capability(tpd->dev, EV_KEY, tpd_dts_data.tpd_key_local[idx]); } #ifdef CONFIG_GTP_GESTURE_WAKEUP input_set_capability(tpd->dev, EV_KEY, KEY_GESTURE); #endif /* EINT device tree, default EINT enable */ tpd_irq_registration(); #ifdef CONFIG_GTP_ESD_PROTECT /* must before auto update */ gt1x_init_esd_protect(); gt1x_esd_switch(SWITCH_ON); #endif update_thread = kthread_run(gt1x_auto_update_proc, (void *)NULL, "gt1x_auto_update"); if (IS_ERR(update_thread)) { err = PTR_ERR(update_thread); GTP_INFO(" failed to create auto-update thread: %d\n", err); } pm_notifier_block.notifier_call = gt1x_pm_notifier; pm_notifier_block.priority = 0; register_pm_notifier(&pm_notifier_block); #ifdef CONFIG_MTK_LENS AF_PowerDown(); #endif return 0; } static s32 tpd_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { int err = 0; /*int count = 0;*/ GTP_INFO("%s enter.", __func__); #ifdef CONFIG_MTK_BOOT if (get_boot_mode() == RECOVERY_BOOT) return 0; #endif probe_thread = kthread_run(tpd_registration, (void *)client, "tpd_probe"); if (IS_ERR(probe_thread)) { err = PTR_ERR(probe_thread); GTP_INFO(" failed to create probe thread: %d\n", err); return err; } GTP_INFO("%s start.wait_event_interruptible", __func__); wait_event_timeout(init_waiter, check_flag == true, 5 * HZ); GTP_INFO("%s end.wait_event_interruptible", __func__); return 0; } static irqreturn_t tpd_eint_interrupt_handler(int irq, void *desc) { unsigned long flags; TPD_DEBUG_PRINT_INT; tpd_flag = 1; spin_lock_irqsave(&irq_flag_lock, flags); if (irq_flag == 0) { spin_unlock_irqrestore(&irq_flag_lock, flags); return IRQ_HANDLED; } /* enter EINT handler disable INT, make sure INT is disable when * handle touch event including top/bottom half * use _nosync to avoid deadlock */ irq_flag = 0; spin_unlock_irqrestore(&irq_flag_lock, flags); disable_irq_nosync(touch_irq); GTP_DEBUG("eint disable irq_flat=%d", irq_flag); /*GTP_INFO("disable irq_flag=%d",irq_flag);*/ wake_up(&waiter); return IRQ_HANDLED; } static int tpd_history_x, tpd_history_y; void gt1x_touch_down(s32 x, s32 y, s32 size, s32 id) { #ifdef CONFIG_GTP_CHANGE_X2Y GTP_SWAP(x, y); #endif #ifndef CONFIG_GTP_ICS_SLOT_REPORT #ifdef CONFIG_CUSTOM_LCM_X unsigned long lcm_x = 0, lcm_y = 0; int ret; #endif #endif input_report_key(tpd->dev, BTN_TOUCH, 1); #ifdef CONFIG_GTP_ICS_SLOT_REPORT input_mt_slot(tpd->dev, id); input_report_abs(tpd->dev, ABS_MT_PRESSURE, size); input_report_abs(tpd->dev, ABS_MT_TOUCH_MAJOR, size); input_report_abs(tpd->dev, ABS_MT_TRACKING_ID, id); input_report_abs(tpd->dev, ABS_MT_POSITION_X, x); input_report_abs(tpd->dev, ABS_MT_POSITION_Y, y); #else if ((!size) && (!id)) { /* for virtual button */ input_report_abs(tpd->dev, ABS_MT_PRESSURE, 100); input_report_abs(tpd->dev, ABS_MT_TOUCH_MAJOR, 100); } else { input_report_abs(tpd->dev, ABS_MT_PRESSURE, size); input_report_abs(tpd->dev, ABS_MT_TOUCH_MAJOR, size); input_report_abs(tpd->dev, ABS_MT_TRACKING_ID, id); } #ifdef CONFIG_CUSTOM_LCM_X ret = kstrtoul(CONFIG_CUSTOM_LCM_X, 0, &lcm_x); if (ret) GTP_ERROR("Touch down get lcm_x failed"); ret = kstrtoul(CONFIG_CUSTOM_LCM_Y, 0, &lcm_y); if (ret) GTP_ERROR("Touch down get lcm_y failed"); if (x < lcm_x) x = 0; else x = x - lcm_x; if (y < lcm_y) y = 0; else y = y - lcm_y; GTP_DEBUG("x:%d, y:%d, lcm_x:%lu, lcm_y:%lu", x, y, lcm_x, lcm_y); #endif input_report_abs(tpd->dev, ABS_MT_POSITION_X, x); input_report_abs(tpd->dev, ABS_MT_POSITION_Y, y); input_mt_sync(tpd->dev); #endif TPD_DEBUG_SET_TIME; TPD_EM_PRINT(x, y, x, y, id, 1); tpd_history_x = x; tpd_history_y = y; #ifdef CONFIG_MTK_BOOT if (tpd_dts_data.use_tpd_button) { if (get_boot_mode() == FACTORY_BOOT || get_boot_mode() == RECOVERY_BOOT) tpd_button(x, y, 1); } #endif } void gt1x_touch_up(s32 id) { #ifdef CONFIG_GTP_ICS_SLOT_REPORT input_mt_slot(tpd->dev, id); input_report_abs(tpd->dev, ABS_MT_TRACKING_ID, -1); #else input_mt_sync(tpd->dev); #endif TPD_DEBUG_SET_TIME; TPD_EM_PRINT(tpd_history_x, tpd_history_y, tpd_history_x, tpd_history_y, id, 0); tpd_history_x = 0; tpd_history_y = 0; #ifdef CONFIG_MTK_BOOT if (tpd_dts_data.use_tpd_button) { if (get_boot_mode() == FACTORY_BOOT || get_boot_mode() == RECOVERY_BOOT) tpd_button(0, 0, 0); } #endif } #ifdef CONFIG_GTP_CHARGER_SWITCH u32 gt1x_get_charger_status(void) { u32 chr_status = 0; #ifdef MT6573 chr_status = *(u32 *)CHR_CON0; chr_status &= (1 << 13); #else /* ( defined(MT6575) || defined(MT6577) || defined(MT6589) ) */ chr_status = upmu_is_chr_det(); #endif return chr_status; } #endif static int tpd_event_handler(void *unused) { u8 finger = 0; u8 end_cmd = 0; s32 ret = 0; u8 point_data[11] = { 0 }; struct sched_param param = {.sched_priority = 4}; sched_setscheduler(current, SCHED_RR, ¶m); do { if (tpd_eint_mode) { wait_event(waiter, tpd_flag != 0); tpd_flag = 0; } else { GTP_DEBUG("Polling coordinate mode!"); msleep(tpd_polling_time); } set_current_state(TASK_RUNNING); mutex_lock(&i2c_access); /* don't reset before "if (tpd_halt..." */ #ifdef CONFIG_GTP_GESTURE_WAKEUP ret = gesture_event_handler(tpd->dev); if (ret >= 0) { gt1x_irq_enable(); mutex_unlock(&i2c_access); continue; } #endif if (tpd_halt) { mutex_unlock(&i2c_access); GTP_DEBUG("return for interrupt after suspend... "); continue; } /* read coordinates */ ret = gt1x_i2c_read(GTP_READ_COOR_ADDR, point_data, sizeof(point_data)); if (ret < 0) { GTP_ERROR("I2C transfer error!"); #ifndef CONFIG_GTP_ESD_PROTECT gt1x_power_reset(); #endif goto exit_work_func; } finger = point_data[0]; /* response to a ic request */ if (finger == 0x00) gt1x_request_event_handler(); if ((finger & 0x80) == 0) { #ifdef CONFIG_HOTKNOT_BLOCK_RW if (!hotknot_paired_flag) { #endif gt1x_irq_enable(); mutex_unlock(&i2c_access); continue; } #ifdef CONFIG_HOTKNOT_BLOCK_RW } ret = hotknot_event_handler(point_data); if (!ret) goto exit_work_func; #endif #ifdef CONFIG_GTP_PROXIMITY ret = gt1x_prox_event_handler(point_data); if (ret > 0) goto exit_work_func; #endif #ifdef CONFIG_GTP_WITH_STYLUS ret = gt1x_touch_event_handler(point_data, tpd->dev, pen_dev); #else ret = gt1x_touch_event_handler(point_data, tpd->dev, NULL); #endif if (ret) { gt1x_irq_enable(); mutex_unlock(&i2c_access); continue; } exit_work_func: if (!gt1x_rawdiff_mode) { ret = gt1x_i2c_write(GTP_READ_COOR_ADDR, &end_cmd, 1); if (ret < 0) GTP_INFO("I2C write end_cmd error!"); } gt1x_irq_enable(); mutex_unlock(&i2c_access); } while (!kthread_should_stop()); return 0; } int gt1x_debug_proc(u8 *buf, int count) { char mode_str[50] = { 0 }; int mode; int ret; ret = sscanf(buf, "%49s %d", (char *)&mode_str, &mode); if (ret < 0) { GTP_ERROR("%s sscanf failed", __func__); return ret; } /***********POLLING/EINT MODE switch****************/ if (strcmp(mode_str, "polling") == 0) { if (mode >= 10 && mode <= 200) { GTP_INFO("Switch to polling mode, polling time is %d", mode); tpd_eint_mode = 0; tpd_polling_time = mode; tpd_flag = 1; wake_up(&waiter); } else { /* please set between 10~200ms */ GTP_INFO("Wrong polling time\n"); } return count; } if (strcmp(mode_str, "eint") == 0) { GTP_INFO("Switch to eint mode"); tpd_eint_mode = 1; return count; } /**********************************************/ if (strcmp(mode_str, "switch") == 0) { if (mode == 0) /*turn off*/ tpd_off(); else if (mode == 1) /*turn on*/ tpd_on(); else GTP_ERROR("error mode :%d", mode); return count; } else if (strcmp(mode_str, "enable_irq") == 0) { if (mode == 0) { GTP_ERROR("enable_irq 0, touch_irq = %d, irq_flag = %d", (int)touch_irq, irq_flag); disable_irq(touch_irq); } else if (mode == 1) { GTP_ERROR("enable_irq 1, touch_irq = %d, irq_flag = %d", (int)touch_irq, irq_flag); enable_irq(touch_irq); } else GTP_ERROR("error mode :%d", mode); } else if (strcmp(mode_str, "rerequest_irq") == 0) { int ret; GTP_ERROR("rerequest_irq, touch_irq = %d, irq_flag = %d", (int)touch_irq, irq_flag); free_irq(touch_irq, NULL); ret = tpd_irq_registration(); if (ret < 0) GTP_ERROR("rerequest_irq fail, %d!", ret); } else if (strcmp(mode_str, "eint_dump_status") == 0) { GTP_ERROR("eint_dump_status, %u", touch_irq); /*mt_eint_dump_status(1);*/ } return -1; } static u16 convert_productname(u8 *name) { int i; u16 product = 0; for (i = 0; i < 4; i++) { product <<= 4; if (name[i] < '0' || name[i] > '9') product += '*'; else product += name[i] - '0'; } return product; } static int tpd_i2c_remove(struct i2c_client *client) { gt1x_deinit(); return 0; } static int tpd_local_init(void) { int ret; ret = gt1x_ts_gpio_setup(); if (ret < 0) goto gpio_err; ret = gt1x_ts_power_init(); if (ret < 0) goto power_init_err; #if TPD_SUPPORT_I2C_DMA tpd->dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); gpDMABuf_va = (u8 *) dma_alloc_coherent(&tpd->dev->dev, IIC_DMA_MAX_TRANSFER_SIZE, &gpDMABuf_pa, GFP_KERNEL); if (!gpDMABuf_va) { GTP_ERROR("Allocate DMA I2C Buffer failed!"); goto regulator_out; } memset(gpDMABuf_va, 0, IIC_DMA_MAX_TRANSFER_SIZE); #endif spin_lock_init(&irq_flag_lock); if (i2c_add_driver(&tpd_i2c_driver) != 0) { GTP_ERROR("unable to add i2c driver."); goto regulator_out; } /*disable auto load touch driver for linux3.0 porting*/ if (tpd_load_status == 0) { GTP_ERROR("add error touch panel driver."); goto touch_probe_err; } #ifdef CONFIG_GTP_ICS_SLOT_REPORT input_mt_init_slots(tpd->dev, 10, 0); #endif if (!tpd_dts_data.touch_max_num) tpd_dts_data.touch_max_num = DEFAULT_MAX_TOUCH_NUM; input_set_abs_params(tpd->dev, ABS_MT_TRACKING_ID, 0, (tpd_dts_data.touch_max_num - 1), 0, 0); if (tpd_dts_data.use_tpd_button) { /*initialize tpd button data*/ tpd_button_setting(tpd_dts_data.tpd_key_num, tpd_dts_data.tpd_key_local, tpd_dts_data.tpd_key_dim_local); } /*set vendor string*/ tpd->dev->id.vendor = 0x00; tpd->dev->id.product = convert_productname(gt1x_version.product_id); tpd->dev->id.version = (gt1x_version.patch_id >> 8); GTP_INFO("end %s --, %d\n", __func__, __LINE__); tpd_type_cap = 1; return 0; touch_probe_err: i2c_del_driver(&tpd_i2c_driver); regulator_out: regulator_put(tpd->reg); gpio_free(tpd_dts_data.rst_gpio_num); gpio_free(tpd_dts_data.eint_gpio_num); gpio_err: power_init_err: return ret; } /* Function to manage low power suspend */ static void tpd_suspend(struct device *h) { s32 ret = -1; #if defined(CONFIG_GTP_HOTKNOT) #ifndef CONFIG_HOTKNOT_BLOCK_RW u8 buf[1] = { 0 }; #endif #endif if (is_resetting || update_info.status) return; GTP_INFO("TPD suspend start..."); mutex_lock(&tui_lock); if (tpd_tui_flag) { GTP_INFO("[TPD] skip %s due to TUI in used\n", __func__); tpd_tui_low_power_skipped = 1; mutex_unlock(&tui_lock); return; } mutex_unlock(&tui_lock); #ifdef CONFIG_GTP_PROXIMITY if (gt1x_proximity_flag == 1) { GTP_INFO("Suspend: proximity is detected!"); return; } #endif #ifdef CONFIG_GTP_HOTKNOT if (hotknot_enabled) { #ifdef CONFIG_HOTKNOT_BLOCK_RW if (hotknot_paired_flag) { GTP_INFO("Suspend: hotknot is paired!"); return; } #else gt1x_i2c_read(GTP_REG_HN_PAIRED, buf, sizeof(buf)); GTP_DEBUG("0x81AA: 0x%02X", buf[0]); if (buf[0] == 0x55) { GTP_INFO("Suspend: hotknot is paired!"); return; } #endif } #endif tpd_halt = 1; #ifdef CONFIG_GTP_ESD_PROTECT gt1x_esd_switch(SWITCH_OFF); #endif #ifdef CONFIG_GTP_CHARGER_SWITCH gt1x_charger_switch(SWITCH_OFF); #endif mutex_lock(&i2c_access); #ifdef CONFIG_GTP_GESTURE_WAKEUP gesture_clear_wakeup_data(); if (gesture_enabled) { gesture_enter_doze(); } else #endif { gt1x_irq_disable(); ret = gt1x_enter_sleep(); if (ret < 0) GTP_ERROR("GTP early suspend failed."); else gtp_suspend = true; } mutex_unlock(&i2c_access); msleep(58); } /* Function to manage power-on resume */ static void tpd_resume(struct device *h) { s32 ret = -1; if (is_resetting || update_info.status) return; GTP_INFO("TPD resume start..."); gtp_suspend = false; #ifdef CONFIG_GTP_PROXIMITY if (gt1x_proximity_flag == 1) { GTP_INFO("Resume: proximity is on!"); return; } #endif #ifdef CONFIG_GTP_HOTKNOT if (hotknot_enabled) { #ifdef CONFIG_HOTKNOT_BLOCK_RW if (hotknot_paired_flag) { hotknot_paired_flag = 0; GTP_INFO("Resume: hotknot is paired!"); return; } #endif } #endif gt1x_irq_disable(); ret = gt1x_wakeup_sleep(); if (ret < 0) GTP_ERROR("GTP later resume failed."); #ifdef CONFIG_GTP_HOTKNOT if (!hotknot_enabled) gt1x_send_cmd(GTP_CMD_HN_EXIT_SLAVE, 0); #endif #ifdef CONFIG_GTP_CHARGER_SWITCH gt1x_charger_config(0); gt1x_charger_switch(SWITCH_ON); #endif tpd_halt = 0; gt1x_irq_enable(); #ifdef CONFIG_GTP_ESD_PROTECT gt1x_esd_switch(SWITCH_ON); #endif #ifdef CONFIG_MTK_LENS AF_PowerDown(); #endif GTP_DEBUG("tpd resume end."); } static struct tpd_driver_t tpd_device_driver = { .tpd_device_name = "gt1151", .tpd_local_init = tpd_local_init, .suspend = tpd_suspend, .resume = tpd_resume, }; void tpd_off(void) { gt1x_power_switch(SWITCH_OFF); tpd_halt = 1; gt1x_irq_disable(); } int tpd_enter_tui(void) { int ret = 0; tpd_tui_flag = 1; GTP_INFO("[%s] enter tui", __func__); return ret; } int tpd_exit_tui(void) { int ret = 0; GTP_INFO("[%s] exit TUI+", __func__); tpd_reregister_from_tui(); mutex_lock(&tui_lock); tpd_tui_flag = 0; mutex_unlock(&tui_lock); if (tpd_tui_low_power_skipped) { tpd_tui_low_power_skipped = 0; GTP_INFO("[%s] do low power again+", __func__); tpd_suspend(NULL); GTP_INFO("[%s] do low power again-", __func__); } GTP_INFO("[%s] exit TUI-", __func__); return ret; } void tpd_on(void) { s32 ret = -1, retry = 0; while (retry++ < 5) { ret = tpd_power_on(); if (ret < 0) GTP_ERROR("I2C Power on ERROR!"); ret = gt1x_send_cfg(gt1x_config, gt1x_cfg_length); if (ret == 0) { GTP_DEBUG("Wakeup sleep send gt1x_config success."); break; } } if (ret < 0) GTP_ERROR("GTP later resume failed."); tpd_halt = 0; } int gt1x_driver_init(void) { GTP_INFO("Goodix touch panel driver init."); tpd_get_dts_info(); if (tpd_driver_add(&tpd_device_driver) < 0) GTP_INFO("add generic driver failed\n"); return 0; } EXPORT_SYMBOL_GPL(gt1x_driver_init); void gt1x_driver_exit(void) { unregister_pm_notifier(&pm_notifier_block); regulator_put(tpd->reg); disable_irq(touch_irq); free_irq(touch_irq, NULL); tpd_driver_remove(&tpd_device_driver); } EXPORT_SYMBOL_GPL(gt1x_driver_exit);