112 lines
2.8 KiB
Plaintext
112 lines
2.8 KiB
Plaintext
Freescale Reference Board Bindings
|
|
|
|
This document describes device tree bindings for various devices that
|
|
exist on some Freescale reference boards.
|
|
|
|
* Board Control and Status (BCSR)
|
|
|
|
Required properties:
|
|
|
|
- compatible : Should be "fsl,<board>-bcsr"
|
|
- reg : Offset and length of the register set for the device
|
|
|
|
Example:
|
|
|
|
bcsr@f8000000 {
|
|
compatible = "fsl,mpc8360mds-bcsr";
|
|
reg = <f8000000 8000>;
|
|
};
|
|
|
|
* Freescale on-board FPGA
|
|
|
|
This is the memory-mapped registers for on board FPGA.
|
|
|
|
Required properties:
|
|
- compatible: should be a board-specific string followed by a string
|
|
indicating the type of FPGA. Example:
|
|
"fsl,<board>-fpga", "fsl,fpga-pixis", or
|
|
"fsl,<board>-fpga", "fsl,fpga-qixis"
|
|
- reg: should contain the address and the length of the FPGA register set.
|
|
|
|
Optional properties:
|
|
- interrupts: should specify event (wakeup) IRQ.
|
|
|
|
Example (P1022DS):
|
|
|
|
board-control@3,0 {
|
|
compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
|
|
reg = <3 0 0x30>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <8 8 0 0>;
|
|
};
|
|
|
|
Example (LS2080A-RDB):
|
|
|
|
cpld@3,0 {
|
|
compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
|
|
reg = <0x3 0 0x10000>;
|
|
};
|
|
|
|
* Freescale BCSR GPIO banks
|
|
|
|
Some BCSR registers act as simple GPIO controllers, each such
|
|
register can be represented by the gpio-controller node.
|
|
|
|
Required properities:
|
|
- compatible : Should be "fsl,<board>-bcsr-gpio".
|
|
- reg : Should contain the address and the length of the GPIO bank
|
|
register.
|
|
- #gpio-cells : Should be two. The first cell is the pin number and the
|
|
second cell is used to specify optional parameters (currently unused).
|
|
- gpio-controller : Marks the port as GPIO controller.
|
|
|
|
Example:
|
|
|
|
bcsr@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8360mds-bcsr";
|
|
reg = <1 0 0x8000>;
|
|
ranges = <0 1 0 0x8000>;
|
|
|
|
bcsr13: gpio-controller@d {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8360mds-bcsr-gpio";
|
|
reg = <0xd 1>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
|
|
* Freescale on-board FPGA connected on I2C bus
|
|
|
|
Some Freescale boards like BSC9132QDS have on board FPGA connected on
|
|
the i2c bus.
|
|
|
|
Required properties:
|
|
- compatible: Should be a board-specific string followed by a string
|
|
indicating the type of FPGA. Example:
|
|
"fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
|
|
- reg: Should contain the address of the FPGA
|
|
|
|
Example:
|
|
fpga: fpga@66 {
|
|
compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
|
|
reg = <0x66>;
|
|
};
|
|
|
|
* Freescale on-board CPLD
|
|
|
|
Some Freescale boards like T1040RDB have an on board CPLD connected.
|
|
|
|
Required properties:
|
|
- compatible: Should be a board-specific string like "fsl,<board>-cpld"
|
|
Example:
|
|
"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
|
|
- reg: should describe CPLD registers
|
|
|
|
Example:
|
|
cpld@3,0 {
|
|
compatible = "fsl,t1040rdb-cpld";
|
|
reg = <3 0 0x300>;
|
|
};
|