kernel_samsung_a34x-permissive/Documentation/devicetree/bindings/sound/pcm512x.txt
2024-04-28 15:51:13 +02:00

53 lines
1.4 KiB
Plaintext

PCM512x audio CODECs
These devices support both I2C and SPI (configured with pin strapping
on the board).
Required properties:
- compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141" or
"ti,pcm5142"
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
- AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
device, as covered in bindings/regulator/regulator.txt
Optional properties:
- clocks : A clock specifier for the clock connected as SCLK. If this
is absent the device will be configured to clock from BCLK. If pll-in
and pll-out are specified in addition to a clock, the device is
configured to accept clock input on a specified gpio pin.
- pll-in, pll-out : gpio pins used to connect the pll using <1>
through <6>. The device will be configured for clock input on the
given pll-in pin and PLL output on the given pll-out pin. An
external connection from the pll-out pin to the SCLK pin is assumed.
Examples:
pcm5122: pcm5122@4c {
compatible = "ti,pcm5122";
reg = <0x4c>;
AVDD-supply = <&reg_3v3_analog>;
DVDD-supply = <&reg_1v8>;
CPVDD-supply = <&reg_3v3>;
};
pcm5142: pcm5142@4c {
compatible = "ti,pcm5142";
reg = <0x4c>;
AVDD-supply = <&reg_3v3_analog>;
DVDD-supply = <&reg_1v8>;
CPVDD-supply = <&reg_3v3>;
clocks = <&sck>;
pll-in = <3>;
pll-out = <6>;
};