77 lines
3.2 KiB
Plaintext
77 lines
3.2 KiB
Plaintext
* Renesas R-Car Compare Match Timer (CMT)
|
|
|
|
The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
|
|
inputs and programmable compare match.
|
|
|
|
Channels share hardware resources but their counter and compare match value
|
|
are independent. A particular CMT instance can implement only a subset of the
|
|
channels supported by the CMT model. Channel indices represent the hardware
|
|
position of the channel in the CMT and don't match the channel numbers in the
|
|
datasheets.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: must contain one or more of the following:
|
|
- "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT
|
|
(CMT1)
|
|
- "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
|
|
(CMT1)
|
|
- "renesas,cmt-48" for all non-second generation 48-bit CMT
|
|
(CMT1 on sh73a0 and r8a7740)
|
|
This is a fallback for the above renesas,cmt-48-* entries.
|
|
|
|
- "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
|
|
- "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
|
|
- "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
|
|
- "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
|
|
- "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
|
|
- "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
|
|
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
|
|
- "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
|
|
- "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
|
|
- "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791.
|
|
- "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793.
|
|
- "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
|
|
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
|
|
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
|
|
|
|
- "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
|
|
and RZ/G1.
|
|
- "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2
|
|
and RZ/G1.
|
|
These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
|
|
listed above.
|
|
|
|
- reg: base address and length of the registers block for the timer module.
|
|
- interrupts: interrupt-specifier for the timer, one per channel.
|
|
- clocks: a list of phandle + clock-specifier pairs, one for each entry
|
|
in clock-names.
|
|
- clock-names: must contain "fck" for the functional clock.
|
|
|
|
|
|
Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
|
|
|
|
cmt0: timer@ffca0000 {
|
|
compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
|
|
reg = <0 0xffca0000 0 0x1004>;
|
|
interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 142 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
|
|
clock-names = "fck";
|
|
};
|
|
|
|
cmt1: timer@e6130000 {
|
|
compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
|
|
reg = <0 0xe6130000 0 0x1004>;
|
|
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 121 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 122 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 123 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 124 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 125 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 126 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
|
|
clock-names = "fck";
|
|
};
|