592 lines
21 KiB
C
592 lines
21 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
|
|
* Copyright (C) 2016 - 2017 Intel Deutschland GmbH
|
|
* Copyright(c) 2018 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called COPYING.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <linuxwifi@intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
|
|
* Copyright (C) 2016 - 2017 Intel Deutschland GmbH
|
|
* Copyright(c) 2018 Intel Corporation
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*****************************************************************************/
|
|
#ifndef __IWL_CONFIG_H__
|
|
#define __IWL_CONFIG_H__
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/ieee80211.h>
|
|
#include <linux/nl80211.h>
|
|
#include "iwl-csr.h"
|
|
|
|
enum iwl_device_family {
|
|
IWL_DEVICE_FAMILY_UNDEFINED,
|
|
IWL_DEVICE_FAMILY_1000,
|
|
IWL_DEVICE_FAMILY_100,
|
|
IWL_DEVICE_FAMILY_2000,
|
|
IWL_DEVICE_FAMILY_2030,
|
|
IWL_DEVICE_FAMILY_105,
|
|
IWL_DEVICE_FAMILY_135,
|
|
IWL_DEVICE_FAMILY_5000,
|
|
IWL_DEVICE_FAMILY_5150,
|
|
IWL_DEVICE_FAMILY_6000,
|
|
IWL_DEVICE_FAMILY_6000i,
|
|
IWL_DEVICE_FAMILY_6005,
|
|
IWL_DEVICE_FAMILY_6030,
|
|
IWL_DEVICE_FAMILY_6050,
|
|
IWL_DEVICE_FAMILY_6150,
|
|
IWL_DEVICE_FAMILY_7000,
|
|
IWL_DEVICE_FAMILY_8000,
|
|
IWL_DEVICE_FAMILY_9000,
|
|
IWL_DEVICE_FAMILY_22000,
|
|
IWL_DEVICE_FAMILY_22560,
|
|
};
|
|
|
|
/*
|
|
* LED mode
|
|
* IWL_LED_DEFAULT: use device default
|
|
* IWL_LED_RF_STATE: turn LED on/off based on RF state
|
|
* LED ON = RF ON
|
|
* LED OFF = RF OFF
|
|
* IWL_LED_BLINK: adjust led blink rate based on blink table
|
|
* IWL_LED_DISABLE: led disabled
|
|
*/
|
|
enum iwl_led_mode {
|
|
IWL_LED_DEFAULT,
|
|
IWL_LED_RF_STATE,
|
|
IWL_LED_BLINK,
|
|
IWL_LED_DISABLE,
|
|
};
|
|
|
|
/**
|
|
* enum iwl_nvm_type - nvm formats
|
|
* @IWL_NVM: the regular format
|
|
* @IWL_NVM_EXT: extended NVM format
|
|
* @IWL_NVM_SDP: NVM format used by 3168 series
|
|
*/
|
|
enum iwl_nvm_type {
|
|
IWL_NVM,
|
|
IWL_NVM_EXT,
|
|
IWL_NVM_SDP,
|
|
};
|
|
|
|
/*
|
|
* This is the threshold value of plcp error rate per 100mSecs. It is
|
|
* used to set and check for the validity of plcp_delta.
|
|
*/
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50
|
|
#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100
|
|
#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0
|
|
|
|
/* TX queue watchdog timeouts in mSecs */
|
|
#define IWL_WATCHDOG_DISABLED 0
|
|
#define IWL_DEF_WD_TIMEOUT 2500
|
|
#define IWL_LONG_WD_TIMEOUT 10000
|
|
#define IWL_MAX_WD_TIMEOUT 120000
|
|
|
|
#define IWL_DEFAULT_MAX_TX_POWER 22
|
|
#define IWL_TX_CSUM_NETIF_FLAGS (NETIF_F_IPV6_CSUM | NETIF_F_IP_CSUM |\
|
|
NETIF_F_TSO | NETIF_F_TSO6)
|
|
|
|
/* Antenna presence definitions */
|
|
#define ANT_NONE 0x0
|
|
#define ANT_INVALID 0xff
|
|
#define ANT_A BIT(0)
|
|
#define ANT_B BIT(1)
|
|
#define ANT_C BIT(2)
|
|
#define ANT_AB (ANT_A | ANT_B)
|
|
#define ANT_AC (ANT_A | ANT_C)
|
|
#define ANT_BC (ANT_B | ANT_C)
|
|
#define ANT_ABC (ANT_A | ANT_B | ANT_C)
|
|
#define MAX_ANT_NUM 3
|
|
|
|
|
|
static inline u8 num_of_ant(u8 mask)
|
|
{
|
|
return !!((mask) & ANT_A) +
|
|
!!((mask) & ANT_B) +
|
|
!!((mask) & ANT_C);
|
|
}
|
|
|
|
/*
|
|
* @max_ll_items: max number of OTP blocks
|
|
* @shadow_ram_support: shadow support for OTP memory
|
|
* @led_compensation: compensate on the led on/off time per HW according
|
|
* to the deviation to achieve the desired led frequency.
|
|
* The detail algorithm is described in iwl-led.c
|
|
* @wd_timeout: TX queues watchdog timeout
|
|
* @max_event_log_size: size of event log buffer size for ucode event logging
|
|
* @shadow_reg_enable: HW shadow register support
|
|
* @apmg_wake_up_wa: should the MAC access REQ be asserted when a command
|
|
* is in flight. This is due to a HW bug in 7260, 3160 and 7265.
|
|
* @scd_chain_ext_wa: should the chain extension feature in SCD be disabled.
|
|
* @max_tfd_queue_size: max number of entries in tfd queue.
|
|
*/
|
|
struct iwl_base_params {
|
|
unsigned int wd_timeout;
|
|
|
|
u16 eeprom_size;
|
|
u16 max_event_log_size;
|
|
|
|
u8 pll_cfg:1, /* for iwl_pcie_apm_init() */
|
|
shadow_ram_support:1,
|
|
shadow_reg_enable:1,
|
|
pcie_l1_allowed:1,
|
|
apmg_wake_up_wa:1,
|
|
scd_chain_ext_wa:1;
|
|
|
|
u16 num_of_queues; /* def: HW dependent */
|
|
u32 max_tfd_queue_size; /* def: HW dependent */
|
|
|
|
u8 max_ll_items;
|
|
u8 led_compensation;
|
|
};
|
|
|
|
/*
|
|
* @stbc: support Tx STBC and 1*SS Rx STBC
|
|
* @ldpc: support Tx/Rx with LDPC
|
|
* @use_rts_for_aggregation: use rts/cts protection for HT traffic
|
|
* @ht40_bands: bitmap of bands (using %NL80211_BAND_*) that support HT40
|
|
*/
|
|
struct iwl_ht_params {
|
|
u8 ht_greenfield_support:1,
|
|
stbc:1,
|
|
ldpc:1,
|
|
use_rts_for_aggregation:1;
|
|
u8 ht40_bands;
|
|
};
|
|
|
|
/*
|
|
* Tx-backoff threshold
|
|
* @temperature: The threshold in Celsius
|
|
* @backoff: The tx-backoff in uSec
|
|
*/
|
|
struct iwl_tt_tx_backoff {
|
|
s32 temperature;
|
|
u32 backoff;
|
|
};
|
|
|
|
#define TT_TX_BACKOFF_SIZE 6
|
|
|
|
/**
|
|
* struct iwl_tt_params - thermal throttling parameters
|
|
* @ct_kill_entry: CT Kill entry threshold
|
|
* @ct_kill_exit: CT Kill exit threshold
|
|
* @ct_kill_duration: The time intervals (in uSec) in which the driver needs
|
|
* to checks whether to exit CT Kill.
|
|
* @dynamic_smps_entry: Dynamic SMPS entry threshold
|
|
* @dynamic_smps_exit: Dynamic SMPS exit threshold
|
|
* @tx_protection_entry: TX protection entry threshold
|
|
* @tx_protection_exit: TX protection exit threshold
|
|
* @tx_backoff: Array of thresholds for tx-backoff , in ascending order.
|
|
* @support_ct_kill: Support CT Kill?
|
|
* @support_dynamic_smps: Support dynamic SMPS?
|
|
* @support_tx_protection: Support tx protection?
|
|
* @support_tx_backoff: Support tx-backoff?
|
|
*/
|
|
struct iwl_tt_params {
|
|
u32 ct_kill_entry;
|
|
u32 ct_kill_exit;
|
|
u32 ct_kill_duration;
|
|
u32 dynamic_smps_entry;
|
|
u32 dynamic_smps_exit;
|
|
u32 tx_protection_entry;
|
|
u32 tx_protection_exit;
|
|
struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE];
|
|
u8 support_ct_kill:1,
|
|
support_dynamic_smps:1,
|
|
support_tx_protection:1,
|
|
support_tx_backoff:1;
|
|
};
|
|
|
|
/*
|
|
* information on how to parse the EEPROM
|
|
*/
|
|
#define EEPROM_REG_BAND_1_CHANNELS 0x08
|
|
#define EEPROM_REG_BAND_2_CHANNELS 0x26
|
|
#define EEPROM_REG_BAND_3_CHANNELS 0x42
|
|
#define EEPROM_REG_BAND_4_CHANNELS 0x5C
|
|
#define EEPROM_REG_BAND_5_CHANNELS 0x74
|
|
#define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82
|
|
#define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92
|
|
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80
|
|
#define EEPROM_REGULATORY_BAND_NO_HT40 0
|
|
|
|
/* lower blocks contain EEPROM image and calibration data */
|
|
#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */
|
|
#define OTP_LOW_IMAGE_SIZE_FAMILY_7000 (16 * 512 * sizeof(u16)) /* 16 KB */
|
|
#define OTP_LOW_IMAGE_SIZE_FAMILY_8000 (32 * 512 * sizeof(u16)) /* 32 KB */
|
|
#define OTP_LOW_IMAGE_SIZE_FAMILY_9000 OTP_LOW_IMAGE_SIZE_FAMILY_8000
|
|
#define OTP_LOW_IMAGE_SIZE_FAMILY_22000 OTP_LOW_IMAGE_SIZE_FAMILY_9000
|
|
|
|
struct iwl_eeprom_params {
|
|
const u8 regulatory_bands[7];
|
|
bool enhanced_txpower;
|
|
};
|
|
|
|
/* Tx-backoff power threshold
|
|
* @pwr: The power limit in mw
|
|
* @backoff: The tx-backoff in uSec
|
|
*/
|
|
struct iwl_pwr_tx_backoff {
|
|
u32 pwr;
|
|
u32 backoff;
|
|
};
|
|
|
|
/**
|
|
* struct iwl_csr_params
|
|
*
|
|
* @flag_sw_reset: reset the device
|
|
* @flag_mac_clock_ready:
|
|
* Indicates MAC (ucode processor, etc.) is powered up and can run.
|
|
* Internal resources are accessible.
|
|
* NOTE: This does not indicate that the processor is actually running.
|
|
* NOTE: This does not indicate that device has completed
|
|
* init or post-power-down restore of internal SRAM memory.
|
|
* Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
|
|
* SRAM is restored and uCode is in normal operation mode.
|
|
* This note is relevant only for pre 5xxx devices.
|
|
* NOTE: After device reset, this bit remains "0" until host sets
|
|
* INIT_DONE
|
|
* @flag_init_done: Host sets this to put device into fully operational
|
|
* D0 power mode. Host resets this after SW_RESET to put device into
|
|
* low power mode.
|
|
* @flag_mac_access_req: Host sets this to request and maintain MAC wakeup,
|
|
* to allow host access to device-internal resources. Host must wait for
|
|
* mac_clock_ready (and !GOING_TO_SLEEP) before accessing non-CSR device
|
|
* registers.
|
|
* @flag_val_mac_access_en: mac access is enabled
|
|
* @flag_master_dis: disable master
|
|
* @flag_stop_master: stop master
|
|
* @addr_sw_reset: address for resetting the device
|
|
* @mac_addr0_otp: first part of MAC address from OTP
|
|
* @mac_addr1_otp: second part of MAC address from OTP
|
|
* @mac_addr0_strap: first part of MAC address from strap
|
|
* @mac_addr1_strap: second part of MAC address from strap
|
|
*/
|
|
struct iwl_csr_params {
|
|
u8 flag_sw_reset;
|
|
u8 flag_mac_clock_ready;
|
|
u8 flag_init_done;
|
|
u8 flag_mac_access_req;
|
|
u8 flag_val_mac_access_en;
|
|
u8 flag_master_dis;
|
|
u8 flag_stop_master;
|
|
u8 addr_sw_reset;
|
|
u32 mac_addr0_otp;
|
|
u32 mac_addr1_otp;
|
|
u32 mac_addr0_strap;
|
|
u32 mac_addr1_strap;
|
|
};
|
|
|
|
/**
|
|
* struct iwl_cfg
|
|
* @name: Official name of the device
|
|
* @fw_name_pre: Firmware filename prefix. The api version and extension
|
|
* (.ucode) will be added to filename before loading from disk. The
|
|
* filename is constructed as fw_name_pre<api>.ucode.
|
|
* @fw_name_pre_b_or_c_step: same as @fw_name_pre, only for b or c steps
|
|
* (if supported)
|
|
* @fw_name_pre_rf_next_step: same as @fw_name_pre_b_or_c_step, only for rf
|
|
* next step. Supported only in integrated solutions.
|
|
* @ucode_api_max: Highest version of uCode API supported by driver.
|
|
* @ucode_api_min: Lowest version of uCode API supported by driver.
|
|
* @max_inst_size: The maximal length of the fw inst section (only DVM)
|
|
* @max_data_size: The maximal length of the fw data section (only DVM)
|
|
* @valid_tx_ant: valid transmit antenna
|
|
* @valid_rx_ant: valid receive antenna
|
|
* @non_shared_ant: the antenna that is for WiFi only
|
|
* @nvm_ver: NVM version
|
|
* @nvm_calib_ver: NVM calibration version
|
|
* @lib: pointer to the lib ops
|
|
* @base_params: pointer to basic parameters
|
|
* @ht_params: point to ht parameters
|
|
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
|
|
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
|
|
* @internal_wimax_coex: internal wifi/wimax combo device
|
|
* @high_temp: Is this NIC is designated to be in high temperature.
|
|
* @host_interrupt_operation_mode: device needs host interrupt operation
|
|
* mode set
|
|
* @nvm_hw_section_num: the ID of the HW NVM section
|
|
* @mac_addr_from_csr: read HW address from CSR registers
|
|
* @features: hw features, any combination of feature_whitelist
|
|
* @pwr_tx_backoffs: translation table between power limits and backoffs
|
|
* @csr: csr flags and addresses that are different across devices
|
|
* @max_rx_agg_size: max RX aggregation size of the ADDBA request/response
|
|
* @max_tx_agg_size: max TX aggregation size of the ADDBA request/response
|
|
* @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the
|
|
* station can receive in HT
|
|
* @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the
|
|
* station can receive in VHT
|
|
* @dccm_offset: offset from which DCCM begins
|
|
* @dccm_len: length of DCCM (including runtime stack CCM)
|
|
* @dccm2_offset: offset from which the second DCCM begins
|
|
* @dccm2_len: length of the second DCCM
|
|
* @smem_offset: offset from which the SMEM begins
|
|
* @smem_len: the length of SMEM
|
|
* @mq_rx_supported: multi-queue rx support
|
|
* @vht_mu_mimo_supported: VHT MU-MIMO support
|
|
* @rf_id: need to read rf_id to determine the firmware image
|
|
* @integrated: discrete or integrated
|
|
* @gen2: 22000 and on transport operation
|
|
* @cdb: CDB support
|
|
* @nvm_type: see &enum iwl_nvm_type
|
|
*
|
|
* We enable the driver to be backward compatible wrt. hardware features.
|
|
* API differences in uCode shouldn't be handled here but through TLVs
|
|
* and/or the uCode API version instead.
|
|
*/
|
|
struct iwl_cfg {
|
|
/* params specific to an individual device within a device family */
|
|
const char *name;
|
|
const char *fw_name_pre;
|
|
const char *fw_name_pre_b_or_c_step;
|
|
const char *fw_name_pre_rf_next_step;
|
|
/* params not likely to change within a device family */
|
|
const struct iwl_base_params *base_params;
|
|
/* params likely to change within a device family */
|
|
const struct iwl_ht_params *ht_params;
|
|
const struct iwl_eeprom_params *eeprom_params;
|
|
const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
|
|
const char *default_nvm_file_C_step;
|
|
const struct iwl_tt_params *thermal_params;
|
|
const struct iwl_csr_params *csr;
|
|
enum iwl_device_family device_family;
|
|
enum iwl_led_mode led_mode;
|
|
enum iwl_nvm_type nvm_type;
|
|
u32 max_data_size;
|
|
u32 max_inst_size;
|
|
netdev_features_t features;
|
|
u32 dccm_offset;
|
|
u32 dccm_len;
|
|
u32 dccm2_offset;
|
|
u32 dccm2_len;
|
|
u32 smem_offset;
|
|
u32 smem_len;
|
|
u32 soc_latency;
|
|
u16 nvm_ver;
|
|
u16 nvm_calib_ver;
|
|
u32 rx_with_siso_diversity:1,
|
|
bt_shared_single_ant:1,
|
|
internal_wimax_coex:1,
|
|
host_interrupt_operation_mode:1,
|
|
high_temp:1,
|
|
mac_addr_from_csr:1,
|
|
lp_xtal_workaround:1,
|
|
disable_dummy_notification:1,
|
|
apmg_not_supported:1,
|
|
mq_rx_supported:1,
|
|
vht_mu_mimo_supported:1,
|
|
rf_id:1,
|
|
integrated:1,
|
|
use_tfh:1,
|
|
gen2:1,
|
|
cdb:1,
|
|
dbgc_supported:1;
|
|
u8 valid_tx_ant;
|
|
u8 valid_rx_ant;
|
|
u8 non_shared_ant;
|
|
u8 nvm_hw_section_num;
|
|
u8 max_rx_agg_size;
|
|
u8 max_tx_agg_size;
|
|
u8 max_ht_ampdu_exponent;
|
|
u8 max_vht_ampdu_exponent;
|
|
u8 ucode_api_max;
|
|
u8 ucode_api_min;
|
|
u32 min_umac_error_event_table;
|
|
u32 extra_phy_cfg_flags;
|
|
};
|
|
|
|
static const struct iwl_csr_params iwl_csr_v1 = {
|
|
.flag_mac_clock_ready = 0,
|
|
.flag_val_mac_access_en = 0,
|
|
.flag_init_done = 2,
|
|
.flag_mac_access_req = 3,
|
|
.flag_sw_reset = 7,
|
|
.flag_master_dis = 8,
|
|
.flag_stop_master = 9,
|
|
.addr_sw_reset = (CSR_BASE + 0x020),
|
|
.mac_addr0_otp = 0x380,
|
|
.mac_addr1_otp = 0x384,
|
|
.mac_addr0_strap = 0x388,
|
|
.mac_addr1_strap = 0x38C
|
|
};
|
|
|
|
static const struct iwl_csr_params iwl_csr_v2 = {
|
|
.flag_init_done = 6,
|
|
.flag_mac_clock_ready = 20,
|
|
.flag_val_mac_access_en = 20,
|
|
.flag_mac_access_req = 21,
|
|
.flag_master_dis = 28,
|
|
.flag_stop_master = 29,
|
|
.flag_sw_reset = 31,
|
|
.addr_sw_reset = (CSR_BASE + 0x024),
|
|
.mac_addr0_otp = 0x30,
|
|
.mac_addr1_otp = 0x34,
|
|
.mac_addr0_strap = 0x38,
|
|
.mac_addr1_strap = 0x3C
|
|
};
|
|
|
|
/*
|
|
* This list declares the config structures for all devices.
|
|
*/
|
|
#if IS_ENABLED(CONFIG_IWLDVM)
|
|
extern const struct iwl_cfg iwl5300_agn_cfg;
|
|
extern const struct iwl_cfg iwl5100_agn_cfg;
|
|
extern const struct iwl_cfg iwl5350_agn_cfg;
|
|
extern const struct iwl_cfg iwl5100_bgn_cfg;
|
|
extern const struct iwl_cfg iwl5100_abg_cfg;
|
|
extern const struct iwl_cfg iwl5150_agn_cfg;
|
|
extern const struct iwl_cfg iwl5150_abg_cfg;
|
|
extern const struct iwl_cfg iwl6005_2agn_cfg;
|
|
extern const struct iwl_cfg iwl6005_2abg_cfg;
|
|
extern const struct iwl_cfg iwl6005_2bg_cfg;
|
|
extern const struct iwl_cfg iwl6005_2agn_sff_cfg;
|
|
extern const struct iwl_cfg iwl6005_2agn_d_cfg;
|
|
extern const struct iwl_cfg iwl6005_2agn_mow1_cfg;
|
|
extern const struct iwl_cfg iwl6005_2agn_mow2_cfg;
|
|
extern const struct iwl_cfg iwl1030_bgn_cfg;
|
|
extern const struct iwl_cfg iwl1030_bg_cfg;
|
|
extern const struct iwl_cfg iwl6030_2agn_cfg;
|
|
extern const struct iwl_cfg iwl6030_2abg_cfg;
|
|
extern const struct iwl_cfg iwl6030_2bgn_cfg;
|
|
extern const struct iwl_cfg iwl6030_2bg_cfg;
|
|
extern const struct iwl_cfg iwl6000i_2agn_cfg;
|
|
extern const struct iwl_cfg iwl6000i_2abg_cfg;
|
|
extern const struct iwl_cfg iwl6000i_2bg_cfg;
|
|
extern const struct iwl_cfg iwl6000_3agn_cfg;
|
|
extern const struct iwl_cfg iwl6050_2agn_cfg;
|
|
extern const struct iwl_cfg iwl6050_2abg_cfg;
|
|
extern const struct iwl_cfg iwl6150_bgn_cfg;
|
|
extern const struct iwl_cfg iwl6150_bg_cfg;
|
|
extern const struct iwl_cfg iwl1000_bgn_cfg;
|
|
extern const struct iwl_cfg iwl1000_bg_cfg;
|
|
extern const struct iwl_cfg iwl100_bgn_cfg;
|
|
extern const struct iwl_cfg iwl100_bg_cfg;
|
|
extern const struct iwl_cfg iwl130_bgn_cfg;
|
|
extern const struct iwl_cfg iwl130_bg_cfg;
|
|
extern const struct iwl_cfg iwl2000_2bgn_cfg;
|
|
extern const struct iwl_cfg iwl2000_2bgn_d_cfg;
|
|
extern const struct iwl_cfg iwl2030_2bgn_cfg;
|
|
extern const struct iwl_cfg iwl6035_2agn_cfg;
|
|
extern const struct iwl_cfg iwl6035_2agn_sff_cfg;
|
|
extern const struct iwl_cfg iwl105_bgn_cfg;
|
|
extern const struct iwl_cfg iwl105_bgn_d_cfg;
|
|
extern const struct iwl_cfg iwl135_bgn_cfg;
|
|
#endif /* CONFIG_IWLDVM */
|
|
#if IS_ENABLED(CONFIG_IWLMVM)
|
|
extern const struct iwl_cfg iwl7260_2ac_cfg;
|
|
extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp;
|
|
extern const struct iwl_cfg iwl7260_2n_cfg;
|
|
extern const struct iwl_cfg iwl7260_n_cfg;
|
|
extern const struct iwl_cfg iwl3160_2ac_cfg;
|
|
extern const struct iwl_cfg iwl3160_2n_cfg;
|
|
extern const struct iwl_cfg iwl3160_n_cfg;
|
|
extern const struct iwl_cfg iwl3165_2ac_cfg;
|
|
extern const struct iwl_cfg iwl3168_2ac_cfg;
|
|
extern const struct iwl_cfg iwl7265_2ac_cfg;
|
|
extern const struct iwl_cfg iwl7265_2n_cfg;
|
|
extern const struct iwl_cfg iwl7265_n_cfg;
|
|
extern const struct iwl_cfg iwl7265d_2ac_cfg;
|
|
extern const struct iwl_cfg iwl7265d_2n_cfg;
|
|
extern const struct iwl_cfg iwl7265d_n_cfg;
|
|
extern const struct iwl_cfg iwl8260_2n_cfg;
|
|
extern const struct iwl_cfg iwl8260_2ac_cfg;
|
|
extern const struct iwl_cfg iwl8265_2ac_cfg;
|
|
extern const struct iwl_cfg iwl8275_2ac_cfg;
|
|
extern const struct iwl_cfg iwl4165_2ac_cfg;
|
|
extern const struct iwl_cfg iwl9160_2ac_cfg;
|
|
extern const struct iwl_cfg iwl9260_2ac_cfg;
|
|
extern const struct iwl_cfg iwl9260_killer_2ac_cfg;
|
|
extern const struct iwl_cfg iwl9270_2ac_cfg;
|
|
extern const struct iwl_cfg iwl9460_2ac_cfg;
|
|
extern const struct iwl_cfg iwl9560_2ac_cfg;
|
|
extern const struct iwl_cfg iwl9460_2ac_cfg_soc;
|
|
extern const struct iwl_cfg iwl9461_2ac_cfg_soc;
|
|
extern const struct iwl_cfg iwl9462_2ac_cfg_soc;
|
|
extern const struct iwl_cfg iwl9560_2ac_cfg_soc;
|
|
extern const struct iwl_cfg iwl9560_killer_2ac_cfg_soc;
|
|
extern const struct iwl_cfg iwl9560_killer_s_2ac_cfg_soc;
|
|
extern const struct iwl_cfg iwl9460_2ac_cfg_shared_clk;
|
|
extern const struct iwl_cfg iwl9461_2ac_cfg_shared_clk;
|
|
extern const struct iwl_cfg iwl9462_2ac_cfg_shared_clk;
|
|
extern const struct iwl_cfg iwl9560_2ac_cfg_shared_clk;
|
|
extern const struct iwl_cfg iwl9560_killer_2ac_cfg_shared_clk;
|
|
extern const struct iwl_cfg iwl9560_killer_s_2ac_cfg_shared_clk;
|
|
extern const struct iwl_cfg iwl22000_2ac_cfg_hr;
|
|
extern const struct iwl_cfg iwl22000_2ac_cfg_hr_cdb;
|
|
extern const struct iwl_cfg iwl22000_2ac_cfg_jf;
|
|
extern const struct iwl_cfg iwl22000_2ax_cfg_hr;
|
|
extern const struct iwl_cfg iwl9461_2ac_cfg_qu_b0_jf_b0;
|
|
extern const struct iwl_cfg iwl9462_2ac_cfg_qu_b0_jf_b0;
|
|
extern const struct iwl_cfg iwl9560_2ac_cfg_qu_b0_jf_b0;
|
|
extern const struct iwl_cfg killer1550i_2ac_cfg_qu_b0_jf_b0;
|
|
extern const struct iwl_cfg killer1550s_2ac_cfg_qu_b0_jf_b0;
|
|
extern const struct iwl_cfg iwl22000_2ax_cfg_jf;
|
|
extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0_f0;
|
|
extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_b0_f0;
|
|
extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_b0;
|
|
extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_jf_b0;
|
|
extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0;
|
|
extern const struct iwl_cfg iwl22560_2ax_cfg_su_cdb;
|
|
#endif /* CPTCFG_IWLMVM || CPTCFG_IWLFMAC */
|
|
|
|
#endif /* __IWL_CONFIG_H__ */
|