6db4831e98
Android 14
873 lines
22 KiB
C
873 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCIe host controller driver for Freescale i.MX6 SoCs
|
|
*
|
|
* Copyright (C) 2013 Kosagi
|
|
* http://www.kosagi.com
|
|
*
|
|
* Author: Sean Cross <xobs@kosagi.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
#define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
enum imx6_pcie_variants {
|
|
IMX6Q,
|
|
IMX6SX,
|
|
IMX6QP,
|
|
IMX7D,
|
|
};
|
|
|
|
struct imx6_pcie {
|
|
struct dw_pcie *pci;
|
|
int reset_gpio;
|
|
bool gpio_active_high;
|
|
struct clk *pcie_bus;
|
|
struct clk *pcie_phy;
|
|
struct clk *pcie_inbound_axi;
|
|
struct clk *pcie;
|
|
struct regmap *iomuxc_gpr;
|
|
struct reset_control *pciephy_reset;
|
|
struct reset_control *apps_reset;
|
|
enum imx6_pcie_variants variant;
|
|
u32 tx_deemph_gen1;
|
|
u32 tx_deemph_gen2_3p5db;
|
|
u32 tx_deemph_gen2_6db;
|
|
u32 tx_swing_full;
|
|
u32 tx_swing_low;
|
|
int link_gen;
|
|
struct regulator *vpcie;
|
|
};
|
|
|
|
/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
|
|
#define PHY_PLL_LOCK_WAIT_MAX_RETRIES 2000
|
|
#define PHY_PLL_LOCK_WAIT_USLEEP_MIN 50
|
|
#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200
|
|
|
|
/* PCIe Root Complex registers (memory-mapped) */
|
|
#define PCIE_RC_IMX6_MSI_CAP 0x50
|
|
#define PCIE_RC_LCR 0x7c
|
|
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1 0x1
|
|
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2 0x2
|
|
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK 0xf
|
|
|
|
#define PCIE_RC_LCSR 0x80
|
|
|
|
/* PCIe Port Logic registers (memory-mapped) */
|
|
#define PL_OFFSET 0x700
|
|
#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
|
|
#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16)
|
|
#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
|
|
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
|
|
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
|
|
|
|
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
|
|
#define PCIE_PHY_CTRL_DATA_LOC 0
|
|
#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
|
|
#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
|
|
#define PCIE_PHY_CTRL_WR_LOC 18
|
|
#define PCIE_PHY_CTRL_RD_LOC 19
|
|
|
|
#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
|
|
#define PCIE_PHY_STAT_ACK_LOC 16
|
|
|
|
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
|
|
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
|
|
|
|
/* PHY registers (not memory-mapped) */
|
|
#define PCIE_PHY_RX_ASIC_OUT 0x100D
|
|
#define PCIE_PHY_RX_ASIC_OUT_VALID (1 << 0)
|
|
|
|
#define PHY_RX_OVRD_IN_LO 0x1005
|
|
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
|
|
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
|
|
|
|
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, int exp_val)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 val;
|
|
u32 max_iterations = 10;
|
|
u32 wait_counter = 0;
|
|
|
|
do {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT);
|
|
val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
|
|
wait_counter++;
|
|
|
|
if (val == exp_val)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
} while (wait_counter < max_iterations);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
return pcie_phy_poll_ack(imx6_pcie, 0);
|
|
}
|
|
|
|
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
|
|
static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, int *data)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 val, phy_ctl;
|
|
int ret;
|
|
|
|
ret = pcie_phy_wait_ack(imx6_pcie, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert Read signal */
|
|
phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, phy_ctl);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT);
|
|
*data = val & 0xffff;
|
|
|
|
/* deassert Read signal */
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00);
|
|
|
|
return pcie_phy_poll_ack(imx6_pcie, 0);
|
|
}
|
|
|
|
static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, int data)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 var;
|
|
int ret;
|
|
|
|
/* write addr */
|
|
/* cap addr */
|
|
ret = pcie_phy_wait_ack(imx6_pcie, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* capture data */
|
|
var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert cap data */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert wr signal */
|
|
var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert wr signal */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
u32 tmp;
|
|
|
|
pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
|
|
tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
|
|
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
|
|
|
|
usleep_range(2000, 3000);
|
|
|
|
pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
|
|
tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
|
|
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
|
|
}
|
|
|
|
/* Added for PCI abort handling */
|
|
static int imx6q_pcie_abort_handler(unsigned long addr,
|
|
unsigned int fsr, struct pt_regs *regs)
|
|
{
|
|
unsigned long pc = instruction_pointer(regs);
|
|
unsigned long instr = *(unsigned long *)pc;
|
|
int reg = (instr >> 12) & 15;
|
|
|
|
/*
|
|
* If the instruction being executed was a read,
|
|
* make it look like it read all-ones.
|
|
*/
|
|
if ((instr & 0x0c100000) == 0x04100000) {
|
|
unsigned long val;
|
|
|
|
if (instr & 0x00400000)
|
|
val = 255;
|
|
else
|
|
val = -1;
|
|
|
|
regs->uregs[reg] = val;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
if ((instr & 0x0e100090) == 0x00100090) {
|
|
regs->uregs[reg] = -1;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct device *dev = imx6_pcie->pci->dev;
|
|
|
|
switch (imx6_pcie->variant) {
|
|
case IMX7D:
|
|
reset_control_assert(imx6_pcie->pciephy_reset);
|
|
reset_control_assert(imx6_pcie->apps_reset);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
|
|
/* Force PCIe PHY reset */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET);
|
|
break;
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_SW_RST,
|
|
IMX6Q_GPR1_PCIE_SW_RST);
|
|
break;
|
|
case IMX6Q:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
|
|
break;
|
|
}
|
|
|
|
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
|
|
int ret = regulator_disable(imx6_pcie->vpcie);
|
|
|
|
if (ret)
|
|
dev_err(dev, "failed to disable vpcie regulator: %d\n",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret = 0;
|
|
|
|
switch (imx6_pcie->variant) {
|
|
case IMX6SX:
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_axi clock\n");
|
|
break;
|
|
}
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
|
|
break;
|
|
case IMX6QP: /* FALLTHROUGH */
|
|
case IMX6Q:
|
|
/* power up core phy and enable ref clock */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
|
|
/*
|
|
* the async reset input need ref clock to sync internally,
|
|
* when the ref clock comes after reset, internal synced
|
|
* reset time is too short, cannot meet the requirement.
|
|
* add one ~10us delay here.
|
|
*/
|
|
udelay(10);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
|
|
break;
|
|
case IMX7D:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
u32 val;
|
|
unsigned int retries;
|
|
struct device *dev = imx6_pcie->pci->dev;
|
|
|
|
for (retries = 0; retries < PHY_PLL_LOCK_WAIT_MAX_RETRIES; retries++) {
|
|
regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR22, &val);
|
|
|
|
if (val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED)
|
|
return;
|
|
|
|
usleep_range(PHY_PLL_LOCK_WAIT_USLEEP_MIN,
|
|
PHY_PLL_LOCK_WAIT_USLEEP_MAX);
|
|
}
|
|
|
|
dev_err(dev, "PCIe PLL lock timeout\n");
|
|
}
|
|
|
|
static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
|
|
ret = regulator_enable(imx6_pcie->vpcie);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable vpcie regulator: %d\n",
|
|
ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_phy clock\n");
|
|
goto err_pcie_phy;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_bus);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_bus clock\n");
|
|
goto err_pcie_bus;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie clock\n");
|
|
goto err_pcie;
|
|
}
|
|
|
|
ret = imx6_pcie_enable_ref_clk(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie ref clock\n");
|
|
goto err_ref_clk;
|
|
}
|
|
|
|
/* allow the clocks to stabilize */
|
|
usleep_range(200, 500);
|
|
|
|
/* Some boards don't have PCIe reset GPIO. */
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
|
imx6_pcie->gpio_active_high);
|
|
msleep(100);
|
|
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
|
!imx6_pcie->gpio_active_high);
|
|
}
|
|
|
|
switch (imx6_pcie->variant) {
|
|
case IMX7D:
|
|
reset_control_deassert(imx6_pcie->pciephy_reset);
|
|
imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
|
|
break;
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_SW_RST, 0);
|
|
|
|
usleep_range(200, 500);
|
|
break;
|
|
case IMX6Q: /* Nothing to do */
|
|
break;
|
|
}
|
|
|
|
return;
|
|
|
|
err_ref_clk:
|
|
clk_disable_unprepare(imx6_pcie->pcie);
|
|
err_pcie:
|
|
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
|
err_pcie_bus:
|
|
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
|
err_pcie_phy:
|
|
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
|
|
ret = regulator_disable(imx6_pcie->vpcie);
|
|
if (ret)
|
|
dev_err(dev, "failed to disable vpcie regulator: %d\n",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
switch (imx6_pcie->variant) {
|
|
case IMX7D:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
|
|
IMX6SX_GPR12_PCIE_RX_EQ_2);
|
|
/* FALLTHROUGH */
|
|
default:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
|
|
|
/* configure constant input signal to the pcie ctrl and phy */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN1,
|
|
imx6_pcie->tx_deemph_gen1 << 0);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
|
|
imx6_pcie->tx_deemph_gen2_3p5db << 6);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
|
|
imx6_pcie->tx_deemph_gen2_6db << 12);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_FULL,
|
|
imx6_pcie->tx_swing_full << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_LOW,
|
|
imx6_pcie->tx_swing_low << 25);
|
|
break;
|
|
}
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
|
|
}
|
|
|
|
static int imx6_pcie_wait_for_link(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
|
|
/* check if the link is up or not */
|
|
if (!dw_pcie_wait_for_link(pci))
|
|
return 0;
|
|
|
|
dev_dbg(dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
|
|
dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
|
|
dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 tmp;
|
|
unsigned int retries;
|
|
|
|
for (retries = 0; retries < 200; retries++) {
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
/* Test if the speed change finished. */
|
|
if (!(tmp & PORT_LOGIC_SPEED_CHANGE))
|
|
return 0;
|
|
usleep_range(100, 1000);
|
|
}
|
|
|
|
dev_err(dev, "Speed change timeout\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
/*
|
|
* Force Gen1 operation when starting the link. In case the link is
|
|
* started in Gen2 mode, there is a possibility the devices on the
|
|
* bus will not be detected at all. This happens with PCIe switches.
|
|
*/
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
|
|
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
|
|
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
|
|
dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
|
|
|
|
/* Start LTSSM. */
|
|
if (imx6_pcie->variant == IMX7D)
|
|
reset_control_deassert(imx6_pcie->apps_reset);
|
|
else
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
|
|
|
|
ret = imx6_pcie_wait_for_link(imx6_pcie);
|
|
if (ret)
|
|
goto err_reset_phy;
|
|
|
|
if (imx6_pcie->link_gen == 2) {
|
|
/* Allow Gen2 mode after the link is up. */
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
|
|
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
|
|
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
|
|
dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
|
|
|
|
/*
|
|
* Start Directed Speed Change so the best possible
|
|
* speed both link partners support can be negotiated.
|
|
*/
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
tmp |= PORT_LOGIC_SPEED_CHANGE;
|
|
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
|
|
|
|
if (imx6_pcie->variant != IMX7D) {
|
|
/*
|
|
* On i.MX7, DIRECT_SPEED_CHANGE behaves differently
|
|
* from i.MX6 family when no link speed transition
|
|
* occurs and we go Gen1 -> yep, Gen1. The difference
|
|
* is that, in such case, it will not be cleared by HW
|
|
* which will cause the following code to report false
|
|
* failure.
|
|
*/
|
|
|
|
ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to bring link up!\n");
|
|
goto err_reset_phy;
|
|
}
|
|
}
|
|
|
|
/* Make sure link training is finished as well! */
|
|
ret = imx6_pcie_wait_for_link(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to bring link up!\n");
|
|
goto err_reset_phy;
|
|
}
|
|
} else {
|
|
dev_info(dev, "Link: Gen2 disabled\n");
|
|
}
|
|
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCSR);
|
|
dev_info(dev, "Link up, Gen%i\n", (tmp >> 16) & 0xf);
|
|
return 0;
|
|
|
|
err_reset_phy:
|
|
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
|
|
dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
|
|
dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
|
|
imx6_pcie_reset_phy(imx6_pcie);
|
|
return ret;
|
|
}
|
|
|
|
static int imx6_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
|
|
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
|
imx6_pcie_init_phy(imx6_pcie);
|
|
imx6_pcie_deassert_core_reset(imx6_pcie);
|
|
dw_pcie_setup_rc(pp);
|
|
imx6_pcie_establish_link(imx6_pcie);
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI))
|
|
dw_pcie_msi_init(pp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
|
|
.host_init = imx6_pcie_host_init,
|
|
};
|
|
|
|
static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
pp->msi_irq = platform_get_irq_byname(pdev, "msi");
|
|
if (pp->msi_irq <= 0) {
|
|
dev_err(dev, "failed to get MSI irq\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
pp->ops = &imx6_pcie_host_ops;
|
|
|
|
ret = dw_pcie_host_init(pp);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize host\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_pcie_ops dw_pcie_ops = {
|
|
/* No special ops needed, but pcie-designware still expects this struct */
|
|
};
|
|
|
|
static int imx6_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dw_pcie *pci;
|
|
struct imx6_pcie *imx6_pcie;
|
|
struct resource *dbi_base;
|
|
struct device_node *node = dev->of_node;
|
|
int ret;
|
|
u16 val;
|
|
|
|
imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
|
|
if (!imx6_pcie)
|
|
return -ENOMEM;
|
|
|
|
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
|
|
if (!pci)
|
|
return -ENOMEM;
|
|
|
|
pci->dev = dev;
|
|
pci->ops = &dw_pcie_ops;
|
|
|
|
imx6_pcie->pci = pci;
|
|
imx6_pcie->variant =
|
|
(enum imx6_pcie_variants)of_device_get_match_data(dev);
|
|
|
|
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
|
|
if (IS_ERR(pci->dbi_base))
|
|
return PTR_ERR(pci->dbi_base);
|
|
|
|
/* Fetch GPIOs */
|
|
imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
|
|
imx6_pcie->gpio_active_high = of_property_read_bool(node,
|
|
"reset-gpio-active-high");
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
|
|
imx6_pcie->gpio_active_high ?
|
|
GPIOF_OUT_INIT_HIGH :
|
|
GPIOF_OUT_INIT_LOW,
|
|
"PCIe reset");
|
|
if (ret) {
|
|
dev_err(dev, "unable to get reset gpio\n");
|
|
return ret;
|
|
}
|
|
} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
|
|
return imx6_pcie->reset_gpio;
|
|
}
|
|
|
|
/* Fetch clocks */
|
|
imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
|
|
if (IS_ERR(imx6_pcie->pcie_phy)) {
|
|
dev_err(dev, "pcie_phy clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_phy);
|
|
}
|
|
|
|
imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus");
|
|
if (IS_ERR(imx6_pcie->pcie_bus)) {
|
|
dev_err(dev, "pcie_bus clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_bus);
|
|
}
|
|
|
|
imx6_pcie->pcie = devm_clk_get(dev, "pcie");
|
|
if (IS_ERR(imx6_pcie->pcie)) {
|
|
dev_err(dev, "pcie clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie);
|
|
}
|
|
|
|
switch (imx6_pcie->variant) {
|
|
case IMX6SX:
|
|
imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
|
|
"pcie_inbound_axi");
|
|
if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
|
|
dev_err(dev, "pcie_inbound_axi clock missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_inbound_axi);
|
|
}
|
|
break;
|
|
case IMX7D:
|
|
imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
|
|
"pciephy");
|
|
if (IS_ERR(imx6_pcie->pciephy_reset)) {
|
|
dev_err(dev, "Failed to get PCIEPHY reset control\n");
|
|
return PTR_ERR(imx6_pcie->pciephy_reset);
|
|
}
|
|
|
|
imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
|
|
"apps");
|
|
if (IS_ERR(imx6_pcie->apps_reset)) {
|
|
dev_err(dev, "Failed to get PCIE APPS reset control\n");
|
|
return PTR_ERR(imx6_pcie->apps_reset);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Grab GPR config register range */
|
|
imx6_pcie->iomuxc_gpr =
|
|
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
|
|
dev_err(dev, "unable to find iomuxc registers\n");
|
|
return PTR_ERR(imx6_pcie->iomuxc_gpr);
|
|
}
|
|
|
|
/* Grab PCIe PHY Tx Settings */
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
|
|
&imx6_pcie->tx_deemph_gen1))
|
|
imx6_pcie->tx_deemph_gen1 = 0;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
|
|
&imx6_pcie->tx_deemph_gen2_3p5db))
|
|
imx6_pcie->tx_deemph_gen2_3p5db = 0;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
|
|
&imx6_pcie->tx_deemph_gen2_6db))
|
|
imx6_pcie->tx_deemph_gen2_6db = 20;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-swing-full",
|
|
&imx6_pcie->tx_swing_full))
|
|
imx6_pcie->tx_swing_full = 127;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-swing-low",
|
|
&imx6_pcie->tx_swing_low))
|
|
imx6_pcie->tx_swing_low = 127;
|
|
|
|
/* Limit link speed */
|
|
ret = of_property_read_u32(node, "fsl,max-link-speed",
|
|
&imx6_pcie->link_gen);
|
|
if (ret)
|
|
imx6_pcie->link_gen = 1;
|
|
|
|
imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
|
|
if (IS_ERR(imx6_pcie->vpcie)) {
|
|
if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV)
|
|
return PTR_ERR(imx6_pcie->vpcie);
|
|
imx6_pcie->vpcie = NULL;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, imx6_pcie);
|
|
|
|
ret = imx6_add_pcie_port(imx6_pcie, pdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (pci_msi_enabled()) {
|
|
val = dw_pcie_readw_dbi(pci, PCIE_RC_IMX6_MSI_CAP +
|
|
PCI_MSI_FLAGS);
|
|
val |= PCI_MSI_FLAGS_ENABLE;
|
|
dw_pcie_writew_dbi(pci, PCIE_RC_IMX6_MSI_CAP + PCI_MSI_FLAGS,
|
|
val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
|
|
|
|
/* bring down link, so bootloader gets clean state in case of reboot */
|
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
|
}
|
|
|
|
static const struct of_device_id imx6_pcie_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-pcie", .data = (void *)IMX6Q, },
|
|
{ .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
|
|
{ .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, },
|
|
{ .compatible = "fsl,imx7d-pcie", .data = (void *)IMX7D, },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver imx6_pcie_driver = {
|
|
.driver = {
|
|
.name = "imx6q-pcie",
|
|
.of_match_table = imx6_pcie_of_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = imx6_pcie_probe,
|
|
.shutdown = imx6_pcie_shutdown,
|
|
};
|
|
|
|
static int __init imx6_pcie_init(void)
|
|
{
|
|
/*
|
|
* Since probe() can be deferred we need to make sure that
|
|
* hook_fault_code is not called after __init memory is freed
|
|
* by kernel and since imx6q_pcie_abort_handler() is a no-op,
|
|
* we can install the handler here without risking it
|
|
* accessing some uninitialized driver state.
|
|
*/
|
|
hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
|
|
"external abort on non-linefetch");
|
|
|
|
return platform_driver_register(&imx6_pcie_driver);
|
|
}
|
|
device_initcall(imx6_pcie_init);
|