886 lines
38 KiB
Plaintext
886 lines
38 KiB
Plaintext
What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8
|
|
Date: March 2018
|
|
Contact: linux-scsi@vger.kernel.org
|
|
Description:
|
|
This file contains the auto-hibernate idle timer setting of a
|
|
UFS host controller. A value of '0' means auto-hibernate is not
|
|
enabled. Otherwise the value is the number of microseconds of
|
|
idle time before the UFS host controller will autonomously put
|
|
the link into hibernate state. That will save power at the
|
|
expense of increased latency. Note that the hardware supports
|
|
10-bit values with a power-of-ten multiplier which allows a
|
|
maximum value of 102300000. Refer to the UFS Host Controller
|
|
Interface specification for more details.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device type. This is one of the UFS
|
|
device descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device class. This is one of the UFS
|
|
device descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the UFS storage subclass. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the protocol supported by an UFS device.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows number of logical units. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows number of well known logical units.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows value that indicates whether the device is
|
|
enabled for boot. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows value that indicates whether the device
|
|
descriptor could be read after partial initialization phase
|
|
of the boot sequence. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows value that defines the power mode after
|
|
device initialization or hardware reset. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the high priority lun. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the secure removal type. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the security lun is supported.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the background operations termination
|
|
latency. This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the initial active ICC level. This is one
|
|
of the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the specification version. This is one
|
|
of the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the manufacturing date in BCD format.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the manufacturee ID. This is one of the
|
|
UFS device descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of outstanding RTTs
|
|
supported by the device. This is one of the UFS device
|
|
descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the frequency and method of the realtime
|
|
clock update. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor
|
|
could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows which features are supported by the device.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be
|
|
found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the FFU timeout. This is one of the
|
|
UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device queue depth. This is one of the
|
|
UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device version. This is one of the
|
|
UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows number of secure write protect areas
|
|
supported by the device. This is one of the UFS device
|
|
descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum amount of data that may be
|
|
written during the pre-soldering phase of the PSA flow.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the command maximum timeout for a change
|
|
in PSA state. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the MIPI UniPro version number in BCD format.
|
|
This is one of the UFS interconnect descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the MIPI M-PHY version number in BCD format.
|
|
This is one of the UFS interconnect descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the total memory quantity available to
|
|
the user to configure the device logical units. This is one
|
|
of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of logical units
|
|
supported by the UFS device. This is one of the UFS
|
|
geometry descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the segment size. This is one of the UFS
|
|
geometry descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the allocation unit size. This is one of
|
|
the UFS geometry descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the minimum addressable block size. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the optimal read block size. This is one
|
|
of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the optimal write block size. This is one
|
|
of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum data-in buffer size. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum data-out buffer size. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of RPMB frames allowed
|
|
in Security Protocol In/Out. This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the dynamic capacity resource policy. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows support for out-of-order data transfer.
|
|
This is one of the UFS geometry descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows maximum available number of contexts which
|
|
are supported by the device. This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows system data tag unit size. This is one of
|
|
the UFS geometry descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows maximum storage area size allocated by
|
|
the device to handle system data by the tagging mechanism.
|
|
This is one of the UFS geometry descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows supported secure removal types. This is
|
|
one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows supported memory types. This is one of
|
|
the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of allocation units for
|
|
different memory types (system code, non persistent,
|
|
enhanced type 1-4). This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the memory capacity adjustment factor for
|
|
different memory types (system code, non persistent,
|
|
enhanced type 1-4). This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows preend of life information. This is one
|
|
of the UFS health descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows indication of the device life time
|
|
(method a). This is one of the UFS health descriptor
|
|
parameters. The full information about the descriptor
|
|
could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows indication of the device life time
|
|
(method b). This is one of the UFS health descriptor
|
|
parameters. The full information about the descriptor
|
|
could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc*
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows maximum VCC, VCCQ and VCCQ2 value for
|
|
active ICC levels from 0 to 15. This is one of the UFS
|
|
power descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a device manufactureer name string.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a product name string. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a OEM ID string. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a device serial number string. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a product revision string. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows boot LUN information. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows LUN write protection status. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows LUN queue depth. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows PSA sensitivity. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows LUN memory type. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file defines the device behavior when a power failure
|
|
occurs during a write operation. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the size of addressable logical blocks
|
|
(calculated as an exponent with base 2). This is one of
|
|
the UFS unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows total number of addressable logical blocks.
|
|
This is one of the UFS unit descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the erase block size. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the thin provisioning type. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the total physical memory resources. This is
|
|
one of the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the context capabilities. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the granularity of the LUN. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device init status. The full information
|
|
about the flag could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether permanent write protection is enabled.
|
|
The full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether write protection is enabled on all
|
|
logical units configured as power on write protected. The
|
|
full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device background operations are
|
|
enabled. The full information about the flag could be
|
|
found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device life span mode is enabled.
|
|
The full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether physical resource removal is enable.
|
|
The full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device is executing internal
|
|
operation related to real time clock. The full information
|
|
about the flag could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device FW update is permanently
|
|
disabled. The full information about the flag could be found
|
|
at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the boot lun enabled UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the current power mode UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the active icc level UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the out of order data transfer enabled UFS
|
|
device attribute. The full information about the attribute
|
|
could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the background operations status UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the purge operation status UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum data size in a DATA IN
|
|
UPIU. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of bytes that can be
|
|
requested with a READY TO TRANSFER UPIU. The full information
|
|
about the attribute could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the reference clock frequency UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the configuration descriptor is locked.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1. The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the maximum current number of
|
|
outstanding RTTs in device that is allowed. The full
|
|
information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the exception event control UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the exception event status UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the ffu status UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file show the PSA feature status. The full information
|
|
about the attribute could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the amount of data that the host plans to
|
|
load to all logical units in pre-soldering state.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/class/scsi_device/*/device/dyn_cap_needed
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the The amount of physical memory needed
|
|
to be removed from the physical memory resources pool of
|
|
the particular logical unit. The full information about
|
|
the attribute could be found at UFS specifications 2.1.
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl
|
|
Date: September 2014
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry could be used to set or show the UFS device
|
|
runtime power management level. The current driver
|
|
implementation supports 6 levels with next target states:
|
|
0 - an UFS device will stay active, an UIC link will
|
|
stay active
|
|
1 - an UFS device will stay active, an UIC link will
|
|
hibernate
|
|
2 - an UFS device will moved to sleep, an UIC link will
|
|
stay active
|
|
3 - an UFS device will moved to sleep, an UIC link will
|
|
hibernate
|
|
4 - an UFS device will be powered off, an UIC link will
|
|
hibernate
|
|
5 - an UFS device will be powered off, an UIC link will
|
|
be powered off
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target power mode of an UFS device
|
|
for the chosen runtime power management level.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target state of an UFS UIC link
|
|
for the chosen runtime power management level.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
|
|
Date: September 2014
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry could be used to set or show the UFS device
|
|
system power management level. The current driver
|
|
implementation supports 6 levels with next target states:
|
|
0 - an UFS device will stay active, an UIC link will
|
|
stay active
|
|
1 - an UFS device will stay active, an UIC link will
|
|
hibernate
|
|
2 - an UFS device will moved to sleep, an UIC link will
|
|
stay active
|
|
3 - an UFS device will moved to sleep, an UIC link will
|
|
hibernate
|
|
4 - an UFS device will be powered off, an UIC link will
|
|
hibernate
|
|
5 - an UFS device will be powered off, an UIC link will
|
|
be powered off
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target power mode of an UFS device
|
|
for the chosen system power management level.
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target state of an UFS UIC link
|
|
for the chosen system power management level.
|
|
The file is read only.
|