738 lines
17 KiB
Plaintext
738 lines
17 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR MIT
|
|
//
|
|
// Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx7d.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX7 SabreSD Board";
|
|
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x80000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
spi4 {
|
|
compatible = "spi-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi4>;
|
|
gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
|
gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
|
num-chipselects = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
extended_io: gpio-expander@0 {
|
|
compatible = "fairchild,74hc595";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0>;
|
|
registers-number = <1>;
|
|
spi-max-frequency = <100000>;
|
|
};
|
|
};
|
|
|
|
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_otg1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_otg2_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_vref_1v8: regulator-vref-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vref-1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
reg_brcm: regulator-brcm {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-name = "brcm_reg";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_brcm_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <200000>;
|
|
};
|
|
|
|
reg_lcd_3v3: regulator-lcd-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lcd-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reg_can2_3v3: regulator-can2-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "can2-3v3";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan2_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 5000000 0>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
status = "okay";
|
|
};
|
|
|
|
panel {
|
|
compatible = "innolux,at043tn24";
|
|
backlight = <&backlight>;
|
|
power-supply = <®_lcd_3v3>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&display_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <®_vref_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&adc2 {
|
|
vref-supply = <®_vref_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&sw1a_reg>;
|
|
};
|
|
|
|
&ecspi3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi3>;
|
|
cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
|
|
tsc2046@0 {
|
|
compatible = "ti,tsc2046";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
pinctrl-names ="default";
|
|
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <29 0>;
|
|
pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
|
ti,x-min = /bits/ 16 <0>;
|
|
ti,x-max = /bits/ 16 <0>;
|
|
ti,y-min = /bits/ 16 <0>;
|
|
ti,y-max = /bits/ 16 <0>;
|
|
ti,pressure-max = /bits/ 16 <0>;
|
|
ti,x-plate-ohms = /bits/ 16 <400>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet1>;
|
|
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
|
|
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
|
|
assigned-clock-rates = <0>, <100000000>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <ðphy0>;
|
|
fsl,magic-packet;
|
|
phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
ethphy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet2>;
|
|
assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
|
|
<&clks IMX7D_ENET2_TIME_ROOT_CLK>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
|
|
assigned-clock-rates = <0>, <100000000>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <ðphy1>;
|
|
fsl,magic-packet;
|
|
status = "okay";
|
|
};
|
|
|
|
&flexcan2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
xceiver-supply = <®_can2_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze3000@8 {
|
|
compatible = "fsl,pfuze3000";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1a {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
/* use sw1c_reg to align with pfuze100/pfuze200 */
|
|
sw1c_reg: sw1b {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vldo2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vccsd {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: v33 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vldo4 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
mpl3115@60 {
|
|
compatible = "fsl,mpl3115";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
status = "okay";
|
|
|
|
codec: wm8960@1a {
|
|
compatible = "wlf,wm8960";
|
|
reg = <0x1a>;
|
|
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
|
clock-names = "mclk";
|
|
wlf,shared-lrclk;
|
|
};
|
|
};
|
|
|
|
&lcdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcdif>;
|
|
status = "okay";
|
|
|
|
port {
|
|
display_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart6 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart6>;
|
|
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
vbus-supply = <®_usb_otg1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
vbus-supply = <®_usb_otg2_vbus>;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
|
wakeup-source;
|
|
keep-power-in-suspend;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
|
wakeup-source;
|
|
keep-power-in-suspend;
|
|
non-removable;
|
|
vmmc-supply = <®_brcm>;
|
|
fsl,tuning-step = <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
|
|
assigned-clock-rates = <400000000>;
|
|
bus-width = <8>;
|
|
fsl,tuning-step = <2>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx7d-sdb {
|
|
pinctrl_brcm_reg: brcmreggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi3: ecspi3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
|
|
MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2
|
|
MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2
|
|
MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet1: enet1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
|
|
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
|
|
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
|
|
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
|
|
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
|
|
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet2: enet2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
|
|
MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
|
|
MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
|
|
MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
|
|
MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
|
|
MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
|
|
MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
|
|
MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
|
|
MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
|
|
MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
|
|
MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
|
|
MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2: flexcan2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
|
|
MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2_reg: flexcan2reggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_keys: gpio_keysgrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59
|
|
MX7D_PAD_SD2_WP__GPIO5_IO10 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
|
|
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
|
|
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
|
|
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
|
|
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4: i2c4grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
|
|
MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcdif: lcdifgrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
|
|
MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
|
|
MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
|
|
MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
|
|
MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
|
|
MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
|
|
MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
|
|
MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
|
|
MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
|
|
MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
|
|
MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
|
|
MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
|
|
MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
|
|
MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
|
|
MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
|
|
MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
|
|
MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
|
|
MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
|
|
MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
|
|
MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
|
|
MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
|
|
MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
|
|
MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
|
|
MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
|
|
MX7D_PAD_LCD_CLK__LCD_CLK 0x79
|
|
MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
|
|
MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
|
|
MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
|
|
MX7D_PAD_LCD_RESET__LCD_RESET 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_spi4: spi4grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
|
|
MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
|
|
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_tsc2046_pendown: tsc2046_pendown {
|
|
fsl,pins = <
|
|
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
|
|
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
|
|
MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
|
|
MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
|
|
MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart6: uart6grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
|
|
MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
|
|
MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
|
|
MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
|
|
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
|
|
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
|
|
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
|
|
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
|
|
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
|
|
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
|
|
MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
|
|
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x19
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
|
|
>;
|
|
};
|
|
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc_lpsr {
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30
|
|
>;
|
|
};
|
|
};
|