316 lines
8.6 KiB
C
316 lines
8.6 KiB
C
/*
|
|
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
|
|
* Copyright 2010 Creative Product Design
|
|
*
|
|
* Derived from mx35 3stack.
|
|
* Original author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/memory.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/mfd/mc13xxx.h>
|
|
|
|
#include "common.h"
|
|
#include "devices-imx35.h"
|
|
#include "ehci.h"
|
|
#include "hardware.h"
|
|
#include "iomux-mx35.h"
|
|
|
|
#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
|
|
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
|
|
|
|
#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
|
|
#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
|
|
#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
|
|
#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
|
|
#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
|
|
#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
|
|
#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
|
|
#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
|
|
|
|
static const struct fb_videomode fb_modedb[] = {
|
|
{
|
|
/* 800x480 @ 60 Hz */
|
|
.name = "PT0708048",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = KHZ2PICOS(33260),
|
|
.left_margin = 50,
|
|
.right_margin = 156,
|
|
.upper_margin = 10,
|
|
.lower_margin = 10,
|
|
.hsync_len = 1, /* note: DE only display */
|
|
.vsync_len = 1, /* note: DE only display */
|
|
.sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
.flag = 0,
|
|
}, {
|
|
/* 800x480 @ 60 Hz */
|
|
.name = "CTP-CLAA070LC0ACW",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = KHZ2PICOS(27000),
|
|
.left_margin = 50,
|
|
.right_margin = 50, /* whole line should have 900 clocks */
|
|
.upper_margin = 10,
|
|
.lower_margin = 10, /* whole frame should have 500 lines */
|
|
.hsync_len = 1, /* note: DE only display */
|
|
.vsync_len = 1, /* note: DE only display */
|
|
.sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
.flag = 0,
|
|
}
|
|
};
|
|
|
|
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
|
.name = "PT0708048",
|
|
.mode = fb_modedb,
|
|
.num_modes = ARRAY_SIZE(fb_modedb),
|
|
};
|
|
|
|
static struct physmap_flash_data vpr200_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource vpr200_flash_resource = {
|
|
.start = MX35_CS0_BASE_ADDR,
|
|
.end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device vpr200_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &vpr200_flash_data,
|
|
},
|
|
.resource = &vpr200_flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
static const struct mxc_nand_platform_data
|
|
vpr200_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
.flash_bbt = 1,
|
|
};
|
|
|
|
#define VPR_KEY_DEBOUNCE 500
|
|
static struct gpio_keys_button vpr200_gpio_keys_table[] = {
|
|
{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
|
|
{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
|
|
{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
|
|
{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
|
|
{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
|
|
{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
|
|
{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
|
|
{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
|
|
};
|
|
|
|
static const struct gpio_keys_platform_data
|
|
vpr200_gpio_keys_data __initconst = {
|
|
.buttons = vpr200_gpio_keys_table,
|
|
.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
|
|
};
|
|
|
|
static struct mc13xxx_platform_data vpr200_pmic = {
|
|
.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
|
|
.bitrate = 50000,
|
|
};
|
|
|
|
static struct i2c_board_info vpr200_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */
|
|
}, {
|
|
I2C_BOARD_INFO("mc13892", 0x08),
|
|
.platform_data = &vpr200_pmic,
|
|
/* irq number is run-time assigned */
|
|
}
|
|
};
|
|
|
|
static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
|
|
/* UART1 */
|
|
MX35_PAD_TXD1__UART1_TXD_MUX,
|
|
MX35_PAD_RXD1__UART1_RXD_MUX,
|
|
/* UART3 */
|
|
MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
|
|
MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
|
|
/* FEC */
|
|
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
|
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
|
|
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
|
|
MX35_PAD_FEC_COL__FEC_COL,
|
|
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
|
|
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
|
|
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
|
|
MX35_PAD_FEC_MDC__FEC_MDC,
|
|
MX35_PAD_FEC_MDIO__FEC_MDIO,
|
|
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
|
|
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
|
|
MX35_PAD_FEC_CRS__FEC_CRS,
|
|
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
|
|
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
|
|
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
|
|
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
|
|
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
|
|
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
|
|
/* Display */
|
|
MX35_PAD_LD0__IPU_DISPB_DAT_0,
|
|
MX35_PAD_LD1__IPU_DISPB_DAT_1,
|
|
MX35_PAD_LD2__IPU_DISPB_DAT_2,
|
|
MX35_PAD_LD3__IPU_DISPB_DAT_3,
|
|
MX35_PAD_LD4__IPU_DISPB_DAT_4,
|
|
MX35_PAD_LD5__IPU_DISPB_DAT_5,
|
|
MX35_PAD_LD6__IPU_DISPB_DAT_6,
|
|
MX35_PAD_LD7__IPU_DISPB_DAT_7,
|
|
MX35_PAD_LD8__IPU_DISPB_DAT_8,
|
|
MX35_PAD_LD9__IPU_DISPB_DAT_9,
|
|
MX35_PAD_LD10__IPU_DISPB_DAT_10,
|
|
MX35_PAD_LD11__IPU_DISPB_DAT_11,
|
|
MX35_PAD_LD12__IPU_DISPB_DAT_12,
|
|
MX35_PAD_LD13__IPU_DISPB_DAT_13,
|
|
MX35_PAD_LD14__IPU_DISPB_DAT_14,
|
|
MX35_PAD_LD15__IPU_DISPB_DAT_15,
|
|
MX35_PAD_LD16__IPU_DISPB_DAT_16,
|
|
MX35_PAD_LD17__IPU_DISPB_DAT_17,
|
|
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
|
|
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
|
|
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
|
|
/* LCD Enable */
|
|
MX35_PAD_D3_VSYNC__GPIO1_2,
|
|
/* USBOTG */
|
|
MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
|
|
MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
|
|
/* SDCARD */
|
|
MX35_PAD_SD1_CMD__ESDHC1_CMD,
|
|
MX35_PAD_SD1_CLK__ESDHC1_CLK,
|
|
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
|
|
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
|
|
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
|
|
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
|
|
/* PMIC */
|
|
MX35_PAD_GPIO2_0__GPIO2_0,
|
|
/* GPIO keys */
|
|
MX35_PAD_SCKR__GPIO1_4,
|
|
MX35_PAD_COMPARE__GPIO1_5,
|
|
MX35_PAD_SCKT__GPIO1_7,
|
|
MX35_PAD_FST__GPIO1_8,
|
|
MX35_PAD_HCKT__GPIO1_9,
|
|
MX35_PAD_TX5_RX0__GPIO1_10,
|
|
MX35_PAD_TX4_RX1__GPIO1_11,
|
|
MX35_PAD_TX3_RX2__GPIO1_12,
|
|
};
|
|
|
|
/* USB Device config */
|
|
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_UTMI,
|
|
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
|
|
};
|
|
|
|
static int vpr200_usbh_init(struct platform_device *pdev)
|
|
{
|
|
return mx35_initialize_usb_hw(pdev->id,
|
|
MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
|
|
}
|
|
|
|
/* USB HOST config */
|
|
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
|
|
.init = vpr200_usbh_init,
|
|
.portsc = MXC_EHCI_MODE_SERIAL,
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&vpr200_flash,
|
|
};
|
|
|
|
/*
|
|
* Board specific initialization.
|
|
*/
|
|
static void __init vpr200_board_init(void)
|
|
{
|
|
imx35_soc_init();
|
|
|
|
mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
|
|
|
|
imx35_add_fec(NULL);
|
|
imx35_add_imx2_wdt();
|
|
|
|
imx35_add_imx_uart0(NULL);
|
|
imx35_add_imx_uart2(NULL);
|
|
|
|
imx35_add_ipu_core();
|
|
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
|
|
|
|
imx35_add_fsl_usb2_udc(&otg_device_pdata);
|
|
imx35_add_mxc_ehci_hs(&usb_host_pdata);
|
|
|
|
imx35_add_mxc_nand(&vpr200_nand_board_info);
|
|
imx35_add_sdhci_esdhc_imx(0, NULL);
|
|
}
|
|
|
|
static void __init vpr200_late_init(void)
|
|
{
|
|
imx_add_gpio_keys(&vpr200_gpio_keys_data);
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
|
|
if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
|
|
printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
|
|
else
|
|
gpio_direction_output(GPIO_LCDPWR, 0);
|
|
|
|
if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
|
|
printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
|
|
else
|
|
gpio_direction_input(GPIO_PMIC_INT);
|
|
|
|
vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
|
|
i2c_register_board_info(0, vpr200_i2c_devices,
|
|
ARRAY_SIZE(vpr200_i2c_devices));
|
|
|
|
imx35_add_imx_i2c0(&vpr200_i2c0_data);
|
|
}
|
|
|
|
static void __init vpr200_timer_init(void)
|
|
{
|
|
mx35_clocks_init();
|
|
}
|
|
|
|
MACHINE_START(VPR200, "VPR200")
|
|
/* Maintainer: Creative Product Design */
|
|
.map_io = mx35_map_io,
|
|
.init_early = imx35_init_early,
|
|
.init_irq = mx35_init_irq,
|
|
.init_time = vpr200_timer_init,
|
|
.init_machine = vpr200_board_init,
|
|
.init_late = vpr200_late_init,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|