318 lines
7.6 KiB
C
318 lines
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* arch/arm/mach-ixp4xx/ixdp425-setup.c
|
|
*
|
|
* IXDP425/IXCDP1100 board-setup
|
|
*
|
|
* Copyright (C) 2003-2005 MontaVista Software, Inc.
|
|
*
|
|
* Author: Deepak Saxena <dsaxena@plexity.net>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#define IXDP425_SDA_PIN 7
|
|
#define IXDP425_SCL_PIN 6
|
|
|
|
/* NAND Flash pins */
|
|
#define IXDP425_NAND_NCE_PIN 12
|
|
|
|
#define IXDP425_NAND_CMD_BYTE 0x01
|
|
#define IXDP425_NAND_ADDR_BYTE 0x02
|
|
|
|
static struct flash_platform_data ixdp425_flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource ixdp425_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device ixdp425_flash = {
|
|
.name = "IXP4XX-Flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &ixdp425_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &ixdp425_flash_resource,
|
|
};
|
|
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
|
|
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
|
|
static struct mtd_partition ixdp425_partitions[] = {
|
|
{
|
|
.name = "ixp400 NAND FS 0",
|
|
.offset = 0,
|
|
.size = SZ_8M
|
|
}, {
|
|
.name = "ixp400 NAND FS 1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
|
|
static void
|
|
ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
int offset = (int)nand_get_controller_data(this);
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
if (ctrl & NAND_NCE) {
|
|
gpio_set_value(IXDP425_NAND_NCE_PIN, 0);
|
|
udelay(5);
|
|
} else
|
|
gpio_set_value(IXDP425_NAND_NCE_PIN, 1);
|
|
|
|
offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
|
|
offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
|
|
nand_set_controller_data(this, (void *)offset);
|
|
}
|
|
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb(cmd, this->IO_ADDR_W + offset);
|
|
}
|
|
|
|
static struct platform_nand_data ixdp425_flash_nand_data = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_delay = 30,
|
|
.partitions = ixdp425_partitions,
|
|
.nr_partitions = ARRAY_SIZE(ixdp425_partitions),
|
|
},
|
|
.ctrl = {
|
|
.cmd_ctrl = ixdp425_flash_nand_cmd_ctrl
|
|
}
|
|
};
|
|
|
|
static struct resource ixdp425_flash_nand_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device ixdp425_flash_nand = {
|
|
.name = "gen_nand",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ixdp425_flash_nand_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &ixdp425_flash_nand_resource,
|
|
};
|
|
#endif /* CONFIG_MTD_NAND_PLATFORM */
|
|
|
|
static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = {
|
|
.dev_id = "i2c-gpio.0",
|
|
.table = {
|
|
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN,
|
|
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
|
|
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SCL_PIN,
|
|
NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
|
|
},
|
|
};
|
|
|
|
static struct platform_device ixdp425_i2c_gpio = {
|
|
.name = "i2c-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = NULL,
|
|
},
|
|
};
|
|
|
|
static struct resource ixdp425_uart_resources[] = {
|
|
{
|
|
.start = IXP4XX_UART1_BASE_PHYS,
|
|
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
{
|
|
.start = IXP4XX_UART2_BASE_PHYS,
|
|
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
.flags = IORESOURCE_MEM
|
|
}
|
|
};
|
|
|
|
static struct plat_serial8250_port ixdp425_uart_data[] = {
|
|
{
|
|
.mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
|
.irq = IRQ_IXP4XX_UART1,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = IXP4XX_UART_XTAL,
|
|
},
|
|
{
|
|
.mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
.irq = IRQ_IXP4XX_UART2,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = IXP4XX_UART_XTAL,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device ixdp425_uart = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev.platform_data = ixdp425_uart_data,
|
|
.num_resources = 2,
|
|
.resource = ixdp425_uart_resources
|
|
};
|
|
|
|
/* Built-in 10/100 Ethernet MAC interfaces */
|
|
static struct eth_plat_info ixdp425_plat_eth[] = {
|
|
{
|
|
.phy = 0,
|
|
.rxq = 3,
|
|
.txreadyq = 20,
|
|
}, {
|
|
.phy = 1,
|
|
.rxq = 4,
|
|
.txreadyq = 21,
|
|
}
|
|
};
|
|
|
|
static struct platform_device ixdp425_eth[] = {
|
|
{
|
|
.name = "ixp4xx_eth",
|
|
.id = IXP4XX_ETH_NPEB,
|
|
.dev.platform_data = ixdp425_plat_eth,
|
|
}, {
|
|
.name = "ixp4xx_eth",
|
|
.id = IXP4XX_ETH_NPEC,
|
|
.dev.platform_data = ixdp425_plat_eth + 1,
|
|
}
|
|
};
|
|
|
|
static struct platform_device *ixdp425_devices[] __initdata = {
|
|
&ixdp425_i2c_gpio,
|
|
&ixdp425_flash,
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
|
|
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
&ixdp425_flash_nand,
|
|
#endif
|
|
&ixdp425_uart,
|
|
&ixdp425_eth[0],
|
|
&ixdp425_eth[1],
|
|
};
|
|
|
|
static void __init ixdp425_init(void)
|
|
{
|
|
ixp4xx_sys_init();
|
|
|
|
ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
ixdp425_flash_resource.end =
|
|
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
|
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
|
|
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
|
|
ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
|
|
|
|
gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin");
|
|
gpio_direction_output(IXDP425_NAND_NCE_PIN, 0);
|
|
|
|
/* Configure expansion bus for NAND Flash */
|
|
*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
|
|
IXP4XX_EXP_BUS_STROBE_T(1) | /* extend by 1 clock */
|
|
IXP4XX_EXP_BUS_CYCLES(0) | /* Intel cycles */
|
|
IXP4XX_EXP_BUS_SIZE(0) | /* 512bytes addr space*/
|
|
IXP4XX_EXP_BUS_WR_EN |
|
|
IXP4XX_EXP_BUS_BYTE_EN; /* 8 bit data bus */
|
|
#endif
|
|
|
|
if (cpu_is_ixp43x()) {
|
|
ixdp425_uart.num_resources = 1;
|
|
ixdp425_uart_data[1].flags = 0;
|
|
}
|
|
|
|
gpiod_add_lookup_table(&ixdp425_i2c_gpiod_table);
|
|
platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_IXDP425
|
|
MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
|
|
/* Maintainer: MontaVista Software, Inc. */
|
|
.map_io = ixp4xx_map_io,
|
|
.init_early = ixp4xx_init_early,
|
|
.init_irq = ixp4xx_init_irq,
|
|
.init_time = ixp4xx_timer_init,
|
|
.atag_offset = 0x100,
|
|
.init_machine = ixdp425_init,
|
|
#if defined(CONFIG_PCI)
|
|
.dma_zone_size = SZ_64M,
|
|
#endif
|
|
.restart = ixp4xx_restart,
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_IXDP465
|
|
MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
|
|
/* Maintainer: MontaVista Software, Inc. */
|
|
.map_io = ixp4xx_map_io,
|
|
.init_early = ixp4xx_init_early,
|
|
.init_irq = ixp4xx_init_irq,
|
|
.init_time = ixp4xx_timer_init,
|
|
.atag_offset = 0x100,
|
|
.init_machine = ixdp425_init,
|
|
#if defined(CONFIG_PCI)
|
|
.dma_zone_size = SZ_64M,
|
|
#endif
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_PRPMC1100
|
|
MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
|
|
/* Maintainer: MontaVista Software, Inc. */
|
|
.map_io = ixp4xx_map_io,
|
|
.init_early = ixp4xx_init_early,
|
|
.init_irq = ixp4xx_init_irq,
|
|
.init_time = ixp4xx_timer_init,
|
|
.atag_offset = 0x100,
|
|
.init_machine = ixdp425_init,
|
|
#if defined(CONFIG_PCI)
|
|
.dma_zone_size = SZ_64M,
|
|
#endif
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_KIXRP435
|
|
MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
|
|
/* Maintainer: MontaVista Software, Inc. */
|
|
.map_io = ixp4xx_map_io,
|
|
.init_early = ixp4xx_init_early,
|
|
.init_irq = ixp4xx_init_irq,
|
|
.init_time = ixp4xx_timer_init,
|
|
.atag_offset = 0x100,
|
|
.init_machine = ixdp425_init,
|
|
#if defined(CONFIG_PCI)
|
|
.dma_zone_size = SZ_64M,
|
|
#endif
|
|
MACHINE_END
|
|
#endif
|