kernel_samsung_a34x-permissive/arch/arm/mach-omap2/cm2xxx.c
2024-04-28 15:51:13 +02:00

403 lines
9.5 KiB
C

/*
* OMAP2xxx CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include "prm2xxx.h"
#include "cm.h"
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
#include "clockdomain.h"
/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
#define DPLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
#define EN_APLL_LOCKED 3
static const u8 omap2xxx_cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
};
/*
*
*/
static void _write_clktrctrl(u8 c, s16 module, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= ~mask;
v |= c << __ffs(mask);
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
}
static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
}
/*
* DPLL autoidle control
*/
static void _omap2xxx_set_dpll_autoidle(u8 m)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~OMAP24XX_AUTO_DPLL_MASK;
v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
}
void omap2xxx_cm_set_dpll_disable_autoidle(void)
{
_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
}
void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
{
_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
}
/*
* APLL control
*/
static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~mask;
v |= m << __ffs(mask);
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
}
void omap2xxx_cm_set_apll54_disable_autoidle(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_54M_MASK);
}
void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_54M_MASK);
}
void omap2xxx_cm_set_apll96_disable_autoidle(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_96M_MASK);
}
void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_96M_MASK);
}
/* Enable an APLL if off */
static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
{
u32 v, m;
m = EN_APLL_LOCKED << enable_bit;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
if (v & m)
return 0; /* apll already enabled */
v |= m;
omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
/*
* REVISIT: Should we return an error code if
* omap2xxx_cm_wait_module_ready() fails?
*/
return 0;
}
/* Stop APLL */
static void _omap2xxx_apll_disable(u8 enable_bit)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
v &= ~(EN_APLL_LOCKED << enable_bit);
omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
}
/* Enable an APLL if off */
int omap2xxx_cm_apll54_enable(void)
{
return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
OMAP24XX_ST_54M_APLL_SHIFT);
}
/* Enable an APLL if off */
int omap2xxx_cm_apll96_enable(void)
{
return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
OMAP24XX_ST_96M_APLL_SHIFT);
}
/* Stop APLL */
void omap2xxx_cm_apll54_disable(void)
{
_omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
}
/* Stop APLL */
void omap2xxx_cm_apll96_disable(void)
{
_omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
}
/**
* omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
* @idlest_reg: CM_IDLEST* virtual address
* @prcm_inst: pointer to an s16 to return the PRCM instance offset
* @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
*
* XXX This function is only needed until absolute register addresses are
* removed from the OMAP struct clk records.
*/
static int omap2xxx_cm_split_idlest_reg(struct clk_omap_reg *idlest_reg,
s16 *prcm_inst,
u8 *idlest_reg_id)
{
unsigned long offs;
u8 idlest_offs;
int i;
idlest_offs = idlest_reg->offset & 0xff;
for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
*idlest_reg_id = i + 1;
break;
}
}
if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
return -EINVAL;
offs = idlest_reg->offset;
offs &= 0xff00;
*prcm_inst = offs;
return 0;
}
/*
*
*/
/**
* omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
* @part: PRCM partition, ignored for OMAP2
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* Wait for the PRCM to indicate that the module identified by
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
* success or -EBUSY if the module doesn't enable in time.
*/
int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
return -EINVAL;
cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
mask = 1 << idlest_shift;
ena = mask;
omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
mask) == ena), MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
/* Clockdomain low-level functions */
static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
{
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
{
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap2xxx_clkdm_wakeup(clkdm);
return 0;
}
static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap2xxx_clkdm_sleep(clkdm);
return 0;
}
struct clkdm_ops omap2_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_read_wkdep = omap2_clkdm_read_wkdep,
.clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
.clkdm_sleep = omap2xxx_clkdm_sleep,
.clkdm_wakeup = omap2xxx_clkdm_wakeup,
.clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
.clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
.clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
.clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
};
int omap2xxx_cm_fclks_active(void)
{
u32 f1, f2;
f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
return (f1 | f2) ? 1 : 0;
}
int omap2xxx_cm_mpu_retention_allowed(void)
{
u32 l;
/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
return 0;
/* Check for UART3. */
l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
if (l & OMAP24XX_EN_UART3_MASK)
return 0;
return 1;
}
u32 omap2xxx_cm_get_core_clk_src(void)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
v &= OMAP24XX_CORE_CLK_SRC_MASK;
return v;
}
u32 omap2xxx_cm_get_core_pll_config(void)
{
return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
}
void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
{
u32 tmp;
omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
OMAP24XX_CLKSEL_DSS2_MASK;
omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
if (mdm)
omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
}
/*
*
*/
static const struct cm_ll_data omap2xxx_cm_ll_data = {
.split_idlest_reg = &omap2xxx_cm_split_idlest_reg,
.wait_module_ready = &omap2xxx_cm_wait_module_ready,
};
int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
{
return cm_register(&omap2xxx_cm_ll_data);
}
static void __exit omap2xxx_cm_exit(void)
{
cm_unregister(&omap2xxx_cm_ll_data);
}
__exitcall(omap2xxx_cm_exit);