116 lines
3.9 KiB
Plaintext
116 lines
3.9 KiB
Plaintext
Amlogic specific extensions to the Synopsys Designware HDMI Controller
|
|
======================================================================
|
|
|
|
The Amlogic Meson Synopsys Designware Integration is composed of :
|
|
- A Synopsys DesignWare HDMI Controller IP
|
|
- A TOP control block controlling the Clocks and PHY
|
|
- A custom HDMI PHY in order to convert video to TMDS signal
|
|
___________________________________
|
|
| HDMI TOP |<= HPD
|
|
|___________________________________|
|
|
| | |
|
|
| Synopsys HDMI | HDMI PHY |=> TMDS
|
|
| Controller |________________|
|
|
|___________________________________|<=> DDC
|
|
|
|
The HDMI TOP block only supports HPD sensing.
|
|
The Synopsys HDMI Controller interrupt is routed through the
|
|
TOP Block interrupt.
|
|
Communication to the TOP Block and the Synopsys HDMI Controller is done
|
|
via a pair of dedicated addr+read/write registers.
|
|
The HDMI PHY is configured by registers in the HHI register block.
|
|
|
|
Pixel data arrives in 4:4:4 format from the VENC block and the VPU HDMI mux
|
|
selects either the ENCI encoder for the 576i or 480i formats or the ENCP
|
|
encoder for all the other formats including interlaced HD formats.
|
|
|
|
The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
|
|
DVI timings for the HDMI controller.
|
|
|
|
Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
|
|
HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
|
|
audio source interfaces.
|
|
|
|
Required properties:
|
|
- compatible: value should be different for each SoC family as :
|
|
- GXBB (S905) : "amlogic,meson-gxbb-dw-hdmi"
|
|
- GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
|
|
- GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
|
|
followed by the common "amlogic,meson-gx-dw-hdmi"
|
|
- reg: Physical base address and length of the controller's registers.
|
|
- interrupts: The HDMI interrupt number
|
|
- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
|
|
and the Amlogic Meson venci clocks as described in
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt,
|
|
the clocks are soc specific, the clock-names should be "iahb", "isfr", "venci"
|
|
- resets, resets-names: must have the phandles to the HDMI apb, glue and phy
|
|
resets as described in :
|
|
Documentation/devicetree/bindings/reset/reset.txt,
|
|
the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
|
|
|
|
Optional properties:
|
|
- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
|
|
logic, as described in the file ../regulator/regulator.txt
|
|
|
|
Required nodes:
|
|
|
|
The connections to the HDMI ports are modeled using the OF graph
|
|
bindings specified in Documentation/devicetree/bindings/graph.txt.
|
|
|
|
The following table lists for each supported model the port number
|
|
corresponding to each HDMI output and input.
|
|
|
|
Port 0 Port 1
|
|
-----------------------------------------
|
|
S905 (GXBB) VENC Input TMDS Output
|
|
S905X (GXL) VENC Input TMDS Output
|
|
S905D (GXL) VENC Input TMDS Output
|
|
S912 (GXM) VENC Input TMDS Output
|
|
|
|
Example:
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&hdmi_tx_tmds_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi_tx: hdmi-tx@c883a000 {
|
|
compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
|
|
reg = <0x0 0xc883a000 0x0 0x1c>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
|
|
resets = <&reset RESET_HDMITX_CAPB3>,
|
|
<&reset RESET_HDMI_SYSTEM_RESET>,
|
|
<&reset RESET_HDMI_TX>;
|
|
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
|
|
clocks = <&clkc CLKID_HDMI_PCLK>,
|
|
<&clkc CLKID_CLK81>,
|
|
<&clkc CLKID_GCLK_VENCI_INT0>;
|
|
clock-names = "isfr", "iahb", "venci";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* VPU VENC Input */
|
|
hdmi_tx_venc_port: port@0 {
|
|
reg = <0>;
|
|
|
|
hdmi_tx_in: endpoint {
|
|
remote-endpoint = <&hdmi_tx_out>;
|
|
};
|
|
};
|
|
|
|
/* TMDS Output */
|
|
hdmi_tx_tmds_port: port@1 {
|
|
reg = <1>;
|
|
|
|
hdmi_tx_tmds_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|