134 lines
4.8 KiB
Plaintext
134 lines
4.8 KiB
Plaintext
#
|
|
# Arcnet configuration
|
|
#
|
|
|
|
menuconfig ARCNET
|
|
depends on NETDEVICES && (ISA || PCI || PCMCIA)
|
|
tristate "ARCnet support"
|
|
---help---
|
|
If you have a network card of this type, say Y and check out the
|
|
(arguably) beautiful poetry in
|
|
<file:Documentation/networking/arcnet.txt>.
|
|
|
|
You need both this driver, and the driver for the particular ARCnet
|
|
chipset of your card. If you don't know, then it's probably a
|
|
COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
|
|
support" below.
|
|
|
|
To compile this driver as a module, choose M here. The module will
|
|
be called arcnet.
|
|
|
|
if ARCNET
|
|
|
|
config ARCNET_1201
|
|
tristate "Enable standard ARCNet packet format (RFC 1201)"
|
|
help
|
|
This allows you to use RFC1201 with your ARCnet card via the virtual
|
|
arc0 device. You need to say Y here to communicate with
|
|
industry-standard RFC1201 implementations, like the arcether.com
|
|
packet driver or most DOS/Windows ODI drivers. Please read the
|
|
ARCnet documentation in <file:Documentation/networking/arcnet.txt>
|
|
for more information about using arc0.
|
|
|
|
config ARCNET_1051
|
|
tristate "Enable old ARCNet packet format (RFC 1051)"
|
|
---help---
|
|
This allows you to use RFC1051 with your ARCnet card via the virtual
|
|
arc0s device. You only need arc0s if you want to talk to ARCnet
|
|
software complying with the "old" standard, specifically, the DOS
|
|
arcnet.com packet driver, Amigas running AmiTCP, and some variants
|
|
of NetBSD. You do not need to say Y here to communicate with
|
|
industry-standard RFC1201 implementations, like the arcether.com
|
|
packet driver or most DOS/Windows ODI drivers. RFC1201 is included
|
|
automatically as the arc0 device. Please read the ARCnet
|
|
documentation in <file:Documentation/networking/arcnet.txt> for more
|
|
information about using arc0e and arc0s.
|
|
|
|
config ARCNET_RAW
|
|
tristate "Enable raw mode packet interface"
|
|
help
|
|
ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely
|
|
to work unless talking to a copy of the same Linux arcnet driver,
|
|
but perhaps marginally faster in that case.
|
|
|
|
config ARCNET_CAP
|
|
tristate "Enable CAP mode packet interface"
|
|
help
|
|
ARCnet "cap mode" packet encapsulation. Used to get the hardware
|
|
acknowledge back to userspace. After the initial protocol byte every
|
|
packet is stuffed with an extra 4 byte "cookie" which doesn't
|
|
actually appear on the network. After transmit the driver will send
|
|
back a packet with protocol byte 0 containing the status of the
|
|
transmission:
|
|
0=no hardware acknowledge
|
|
1=excessive nak
|
|
2=transmission accepted by the receiver hardware
|
|
|
|
Received packets are also stuffed with the extra 4 bytes but it will
|
|
be random data.
|
|
|
|
Cap only listens to protocol 1-8.
|
|
|
|
config ARCNET_COM90xx
|
|
tristate "ARCnet COM90xx (normal) chipset driver"
|
|
help
|
|
This is the chipset driver for the standard COM90xx cards. If you
|
|
have always used the old ARCnet driver without knowing what type of
|
|
card you had, this is probably the one for you.
|
|
|
|
To compile this driver as a module, choose M here. The module will
|
|
be called com90xx.
|
|
|
|
config ARCNET_COM90xxIO
|
|
tristate "ARCnet COM90xx (IO mapped) chipset driver"
|
|
---help---
|
|
This is the chipset driver for the COM90xx cards, using them in
|
|
IO-mapped mode instead of memory-mapped mode. This is slower than
|
|
the normal driver. Only use it if your card doesn't support shared
|
|
memory.
|
|
|
|
To compile this driver as a module, choose M here. The module will
|
|
be called com90io.
|
|
|
|
config ARCNET_RIM_I
|
|
tristate "ARCnet COM90xx (RIM I) chipset driver"
|
|
---help---
|
|
This is yet another chipset driver for the COM90xx cards, but this
|
|
time only using memory-mapped mode, and no IO ports at all. This
|
|
driver is completely untested, so if you have one of these cards,
|
|
please mail <dwmw2@infradead.org>, especially if it works!
|
|
|
|
To compile this driver as a module, choose M here. The module will
|
|
be called arc-rimi.
|
|
|
|
config ARCNET_COM20020
|
|
tristate "ARCnet COM20020 chipset driver"
|
|
depends on LEDS_CLASS
|
|
help
|
|
This is the driver for the new COM20020 chipset. It supports such
|
|
things as promiscuous mode, so packet sniffing is possible, and
|
|
extra diagnostic information.
|
|
|
|
To compile this driver as a module, choose M here. The module will
|
|
be called com20020.
|
|
|
|
config ARCNET_COM20020_ISA
|
|
tristate "Support for COM20020 on ISA"
|
|
depends on ARCNET_COM20020 && ISA
|
|
|
|
config ARCNET_COM20020_PCI
|
|
tristate "Support for COM20020 on PCI"
|
|
depends on ARCNET_COM20020 && PCI
|
|
|
|
config ARCNET_COM20020_CS
|
|
tristate "COM20020 ARCnet PCMCIA support"
|
|
depends on ARCNET_COM20020 && PCMCIA
|
|
help
|
|
Say Y here if you intend to attach this type of ARCnet PCMCIA card
|
|
to your computer.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called com20020_cs. If unsure, say N.
|
|
|
|
endif # ARCNET
|