kernel_samsung_a34x-permissive/drivers/media/platform/vicodec/vicodec-codec.h
2024-04-28 15:51:13 +02:00

130 lines
3.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2016 Tom aan de Wiel
* Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
*/
#ifndef VICODEC_RLC_H
#define VICODEC_RLC_H
#include <linux/types.h>
#include <linux/bitops.h>
#include <asm/byteorder.h>
/*
* The compressed format consists of a cframe_hdr struct followed by the
* compressed frame data. The header contains the size of that data.
* Each Y, Cb and Cr plane is compressed separately. If the compressed
* size of each plane becomes larger than the uncompressed size, then
* that plane is stored uncompressed and the corresponding bit is set
* in the flags field of the header.
*
* Each compressed plane consists of macroblocks and each macroblock
* is run-length-encoded. Each macroblock starts with a 16 bit value.
* Bit 15 indicates if this is a P-coded macroblock (1) or not (0).
* P-coded macroblocks contain a delta against the previous frame.
*
* Bits 1-12 contain a number. If non-zero, then this same macroblock
* repeats that number of times. This results in a high degree of
* compression for generated images like colorbars.
*
* Following this macroblock header the MB coefficients are run-length
* encoded: the top 12 bits contain the coefficient, the bottom 4 bits
* tell how many times this coefficient occurs. The value 0xf indicates
* that the remainder of the macroblock should be filled with zeroes.
*
* All 16 and 32 bit values are stored in big-endian (network) order.
*
* Each cframe_hdr starts with an 8 byte magic header that is
* guaranteed not to occur in the compressed frame data. This header
* can be used to sync to the next frame.
*
* This codec uses the Fast Walsh Hadamard Transform. Tom aan de Wiel
* developed this as part of a university project, specifically for use
* with this driver. His project report can be found here:
*
* https://hverkuil.home.xs4all.nl/fwht.pdf
*/
/*
* Note: bit 0 of the header must always be 0. Otherwise it cannot
* be guaranteed that the magic 8 byte sequence (see below) can
* never occur in the rlc output.
*/
#define PFRAME_BIT (1 << 15)
#define DUPS_MASK 0x1ffe
/*
* This is a sequence of 8 bytes with the low 4 bits set to 0xf.
*
* This sequence cannot occur in the encoded data
*/
#define VICODEC_MAGIC1 0x4f4f4f4f
#define VICODEC_MAGIC2 0xffffffff
#define VICODEC_VERSION 1
#define VICODEC_MAX_WIDTH 3840
#define VICODEC_MAX_HEIGHT 2160
#define VICODEC_MIN_WIDTH 640
#define VICODEC_MIN_HEIGHT 480
#define PBLOCK 0
#define IBLOCK 1
/* Set if this is an interlaced format */
#define VICODEC_FL_IS_INTERLACED BIT(0)
/* Set if this is a bottom-first (NTSC) interlaced format */
#define VICODEC_FL_IS_BOTTOM_FIRST BIT(1)
/* Set if each 'frame' contains just one field */
#define VICODEC_FL_IS_ALTERNATE BIT(2)
/*
* If VICODEC_FL_IS_ALTERNATE was set, then this is set if this
* 'frame' is the bottom field, else it is the top field.
*/
#define VICODEC_FL_IS_BOTTOM_FIELD BIT(3)
/* Set if this frame is uncompressed */
#define VICODEC_FL_LUMA_IS_UNCOMPRESSED BIT(4)
#define VICODEC_FL_CB_IS_UNCOMPRESSED BIT(5)
#define VICODEC_FL_CR_IS_UNCOMPRESSED BIT(6)
struct cframe_hdr {
u32 magic1;
u32 magic2;
__be32 version;
__be32 width, height;
__be32 flags;
__be32 colorspace;
__be32 xfer_func;
__be32 ycbcr_enc;
__be32 quantization;
__be32 size;
};
struct cframe {
unsigned int width, height;
__be16 *rlc_data;
s16 coeffs[8 * 8];
s16 de_coeffs[8 * 8];
s16 de_fwht[8 * 8];
u32 size;
};
struct raw_frame {
unsigned int width, height;
unsigned int chroma_step;
u8 *luma, *cb, *cr;
};
#define FRAME_PCODED BIT(0)
#define FRAME_UNENCODED BIT(1)
#define LUMA_UNENCODED BIT(2)
#define CB_UNENCODED BIT(3)
#define CR_UNENCODED BIT(4)
u32 encode_frame(struct raw_frame *frm, struct raw_frame *ref_frm,
struct cframe *cf, bool is_intra, bool next_is_intra);
void decode_frame(struct cframe *cf, struct raw_frame *ref, u32 hdr_flags);
#endif