6db4831e98
Android 14
6158 lines
154 KiB
C
6158 lines
154 KiB
C
/*
|
|
* Copyright (C) 2014-2020 NXP Semiconductors, All Rights Reserved.
|
|
* Copyright 2020 GOODIX, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "%s(): " fmt, __func__
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/version.h>
|
|
#include <linux/input.h>
|
|
#include "inc/config.h"
|
|
#include "inc/tfa98xx.h"
|
|
#include "inc/tfa.h"
|
|
#include "inc/tfa_internal.h"
|
|
|
|
/* required for enum tfa9912_irq */
|
|
#include "inc/tfa98xx_tfafieldnames.h"
|
|
|
|
#define TFA98XX_VERSION TFA98XX_API_REV_STR
|
|
|
|
#define I2C_RETRIES 50
|
|
#define I2C_RETRY_DELAY 5 /* ms */
|
|
#define TFA_RESET_DELAY 5 /* ms */
|
|
|
|
#ifdef N1A
|
|
#include "inc/tfa98xx_genregs_N1A12.h"
|
|
#else
|
|
#include "inc/tfa98xx_genregs_N1C.h"
|
|
#endif
|
|
|
|
#include <linux/power_supply.h>
|
|
#define REF_TEMP_DEVICE_NAME "battery"
|
|
|
|
#include <mtk-sp-spk-amp.h>
|
|
|
|
#define TFA98XX_VERSION TFA98XX_API_REV_STR
|
|
|
|
/* Change volume selection behavior:
|
|
* Uncomment following line to generate a profile change when updating
|
|
* a volume control (also changes to the profile of the modified volume
|
|
* control)
|
|
*/
|
|
/*#define TFA98XX_ALSA_CTRL_PROF_CHG_ON_VOL 1*/
|
|
|
|
/* Supported rates and data formats */
|
|
#define TFA98XX_RATES (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_32000 | \
|
|
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
|
|
|
|
static unsigned int sr_converted = 48000;
|
|
|
|
#define TFA98XX_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
/* data accessible by all instances */
|
|
/* Memory pool used for DSP messages */
|
|
static struct kmem_cache *tfa98xx_cache;
|
|
/* Mutex protected data */
|
|
static DEFINE_MUTEX(tfa98xx_mutex);
|
|
static DEFINE_MUTEX(probe_lock);
|
|
static LIST_HEAD(tfa98xx_device_list);
|
|
static int tfa98xx_device_count;
|
|
static int tfa98xx_sync_count;
|
|
static int tfa98xx_monitor_count;
|
|
#define MONITOR_COUNT_MAX 5
|
|
|
|
static LIST_HEAD(profile_list); /* list of user selectable profiles */
|
|
static int tfa98xx_mixer_profiles; /* number of user selectable profiles */
|
|
static int tfa98xx_mixer_profile; /* current mixer profile */
|
|
static struct snd_kcontrol_new *tfa98xx_controls;
|
|
static struct tfa_container *tfa98xx_container;
|
|
|
|
static int buf_pool_size[POOL_MAX_INDEX] = {
|
|
64 * 1024,
|
|
64 * 1024,
|
|
64 * 1024,
|
|
64 * 1024,
|
|
64 * 1024,
|
|
8 * 1024
|
|
};
|
|
|
|
static int tfa98xx_kmsg_regs;
|
|
static int tfa98xx_ftrace_regs;
|
|
|
|
static char *fw_name = "tfa98xx.cnt";
|
|
module_param(fw_name, charp, 0644);
|
|
MODULE_PARM_DESC(fw_name, "TFA98xx DSP firmware (container file) name.");
|
|
|
|
static int trace_level;
|
|
module_param(trace_level, int, 0444);
|
|
MODULE_PARM_DESC(trace_level, "TFA98xx debug trace level (0=off, bits:1=verbose,2=regdmesg,3=regftrace,4=timing).");
|
|
|
|
static char *dflt_prof_name = "";
|
|
module_param(dflt_prof_name, charp, 0444);
|
|
|
|
static int no_start;
|
|
module_param(no_start, int, 0444);
|
|
MODULE_PARM_DESC(no_start, "do not start the work queue; for debugging via user\n");
|
|
|
|
static int no_reset;
|
|
module_param(no_reset, int, 0444);
|
|
MODULE_PARM_DESC(no_reset, "do not use the reset line; for debugging via user\n");
|
|
|
|
static int pcm_sample_format = -1;
|
|
/*
|
|
* Be careful. Setting pcm_sample_format to 3 means
|
|
* TDM settings will be dynamically adapted,
|
|
* If there's TDM setting in container file (cnt),
|
|
* it's to be overwritten with what's specified by hw_params.
|
|
*/
|
|
module_param(pcm_sample_format, int, 0444);
|
|
MODULE_PARM_DESC(pcm_sample_format, "PCM sample format: 0=S16_LE, 1=S24_LE, 2=S32_LE, -1=all\n");
|
|
|
|
static int pcm_no_constraint;
|
|
module_param(pcm_no_constraint, int, 0444);
|
|
MODULE_PARM_DESC(pcm_no_constraint, "do not use constraints for PCM parameters\n");
|
|
|
|
static void tfa98xx_dsp_init(struct tfa98xx *tfa98xx);
|
|
|
|
static void tfa98xx_interrupt_enable(struct tfa98xx *tfa98xx, bool enable);
|
|
|
|
static int get_profile_from_list(char *buf, int id);
|
|
static int get_profile_id_for_sr(int id, unsigned int rate);
|
|
|
|
static int _tfa98xx_mute(struct tfa98xx *tfa98xx, int mute, int stream);
|
|
static int _tfa98xx_stop(struct tfa98xx *tfa98xx);
|
|
|
|
static void tfa98xx_check_calibration(struct tfa98xx *tfa98xx);
|
|
static int tfa98xx_run_calibration(struct tfa98xx *tfa98xx);
|
|
|
|
static void tfa98xx_set_dsp_configured(struct tfa98xx *tfa98xx);
|
|
|
|
static void tfa98xx_container_loaded
|
|
(const struct firmware *cont, void *context);
|
|
|
|
struct tfa98xx_rate {
|
|
unsigned int rate;
|
|
unsigned int fssel;
|
|
};
|
|
|
|
static const struct tfa98xx_rate rate_to_fssel[] = {
|
|
{8000, 0},
|
|
{11025, 1},
|
|
{12000, 2},
|
|
{16000, 3},
|
|
{22050, 4},
|
|
{24000, 5},
|
|
{32000, 6},
|
|
{44100, 7},
|
|
{48000, 8},
|
|
};
|
|
|
|
static const unsigned int index_to_rate[] = {
|
|
5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000
|
|
};
|
|
|
|
static inline char *_tfa_cont_profile_name
|
|
(struct tfa98xx *tfa98xx, int prof_idx)
|
|
{
|
|
if (tfa98xx->tfa->cnt == NULL)
|
|
return NULL;
|
|
|
|
return tfa_cont_profile_name(tfa98xx->tfa->cnt,
|
|
tfa98xx->tfa->dev_idx, prof_idx);
|
|
}
|
|
|
|
static enum tfa_error tfa98xx_write_re25(struct tfa_device *tfa, int value)
|
|
{
|
|
enum tfa_error err;
|
|
|
|
/* clear MTPEX */
|
|
err = tfa_dev_mtp_set(tfa, TFA_MTP_EX, 0);
|
|
if (err == tfa_error_ok) {
|
|
/* set RE25 in shadow regiser */
|
|
err = tfa_dev_mtp_set(tfa, TFA_MTP_RE25_PRIM, value);
|
|
}
|
|
if (err == tfa_error_ok) {
|
|
/* set MTPEX to copy RE25 into MTP */
|
|
err = tfa_dev_mtp_set(tfa, TFA_MTP_EX, 2);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Wrapper for tfa start */
|
|
static enum tfa_error
|
|
tfa98xx_tfa_start(struct tfa98xx *tfa98xx, int next_profile, int vstep)
|
|
{
|
|
enum tfa_error err;
|
|
ktime_t start_time = 0;
|
|
ktime_t stop_time = 0;
|
|
u64 delta_time;
|
|
|
|
if (trace_level & 8)
|
|
start_time = ktime_get_boottime();
|
|
|
|
err = tfa_dev_start(tfa98xx->tfa, next_profile, vstep);
|
|
|
|
if (trace_level & 8) {
|
|
stop_time = ktime_get_boottime();
|
|
delta_time = ktime_to_ns(ktime_sub(stop_time, start_time));
|
|
do_div(delta_time, 1000);
|
|
dev_dbg(tfa98xx->dev, "tfa_dev_start(%d,%d) time = %lld us\n",
|
|
next_profile, vstep, delta_time);
|
|
}
|
|
|
|
if ((err == tfa_error_ok) && (tfa98xx->set_mtp_cal)) {
|
|
enum tfa_error err_cal;
|
|
|
|
err_cal = tfa98xx_write_re25(tfa98xx->tfa, tfa98xx->cal_data);
|
|
if (err_cal != tfa_error_ok) {
|
|
pr_err("Error, setting calibration value in mtp, err=%d\n",
|
|
err_cal);
|
|
} else {
|
|
tfa98xx->set_mtp_cal = false;
|
|
pr_info("Calibration value (%d) set in mtp\n",
|
|
tfa98xx->cal_data);
|
|
}
|
|
}
|
|
|
|
/* Remove sticky bit by reading it once */
|
|
tfa_get_noclk(tfa98xx->tfa);
|
|
|
|
/* A cold start erases the configuration, including interrupts setting.
|
|
* Restore it if required
|
|
*/
|
|
tfa98xx_interrupt_enable(tfa98xx, true);
|
|
|
|
return err;
|
|
}
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
/* OTC reporting
|
|
* Returns the MTP0 OTC bit value
|
|
*/
|
|
static int tfa98xx_dbgfs_otc_get(void *data, u64 *val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
int value;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
value = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_OTC);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (value < 0) {
|
|
pr_err("[0x%x] Unable to access MTPOTC: %d\n",
|
|
tfa98xx->i2c->addr, value);
|
|
return -EIO;
|
|
}
|
|
|
|
*val = value;
|
|
pr_debug("[0x%x] OTC : %d\n", tfa98xx->i2c->addr, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_dbgfs_otc_set(void *data, u64 val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
enum tfa_error err;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (val != 0 && val != 1) {
|
|
pr_err("[0x%x] Unexpected value %llu\n",
|
|
tfa98xx->i2c->addr, val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
err = tfa_dev_mtp_set(tfa98xx->tfa, TFA_MTP_OTC, val);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (err != tfa_error_ok) {
|
|
pr_err("[0x%x] Unable to access MTPOTC: err %d\n",
|
|
tfa98xx->i2c->addr, err);
|
|
return -EIO;
|
|
}
|
|
|
|
pr_debug("[0x%x] OTC < %llu\n", tfa98xx->i2c->addr, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_dbgfs_mtpex_get(void *data, u64 *val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
int value;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
value = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_EX);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (value < 0) {
|
|
pr_err("[0x%x] Unable to access MTPEX: %d\n",
|
|
tfa98xx->i2c->addr, value);
|
|
return -EIO;
|
|
}
|
|
|
|
*val = value;
|
|
pr_debug("[0x%x] MTPEX : %d\n", tfa98xx->i2c->addr, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_dbgfs_mtpex_set(void *data, u64 val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
enum tfa_error err;
|
|
enum tfa98xx_error ret;
|
|
u16 temp_val = DEFAULT_REF_TEMP;
|
|
int idx, ndev;
|
|
struct tfa_device *ntfa = NULL;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (val != 0) {
|
|
pr_err("[0x%x] Can only clear MTPEX (0 value expected)\n",
|
|
tfa98xx->i2c->addr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* EXT_TEMP */
|
|
ret = tfa98xx_read_reference_temp(&temp_val);
|
|
if (ret)
|
|
pr_err("error in reading reference temp\n");
|
|
|
|
ndev = tfa98xx->tfa->dev_count;
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
ntfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (ntfa == NULL)
|
|
continue;
|
|
tfa98xx_set_exttemp(ntfa, (short)temp_val);
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
err = tfa_dev_mtp_set(tfa98xx->tfa, TFA_MTP_EX, 0);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (err != tfa_error_ok) {
|
|
pr_err("[0x%x] Unable to access MTPEX: err %d (suspended)\n",
|
|
tfa98xx->i2c->addr, err);
|
|
/* suspend until TFA98xx is active */
|
|
tfa98xx->tfa->reset_mtpex = 1;
|
|
return -EIO;
|
|
}
|
|
|
|
pr_debug("[0x%x] MTPEX < 0\n", tfa98xx->i2c->addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_dbgfs_temp_get(void *data, u64 *val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
*val = tfa98xx_get_exttemp(tfa98xx->tfa);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
pr_debug("[0x%x] TEMP : %llu\n", tfa98xx->i2c->addr, *val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_dbgfs_temp_set(void *data, u64 val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa98xx_set_exttemp(tfa98xx->tfa, (short)val);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
pr_debug("[0x%x] TEMP < %llu\n", tfa98xx->i2c->addr, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_start_get(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
char *str;
|
|
int ret = 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
str = kmalloc(PAGE_SIZE, GFP_KERNEL);
|
|
if (!str)
|
|
return -ENOMEM;
|
|
|
|
tfa98xx_check_calibration(tfa98xx);
|
|
|
|
if (tfa98xx->calibrate_done) {
|
|
pr_info("[0x%x] Calibration Success\n", tfa98xx->i2c->addr);
|
|
snprintf(str, PAGE_SIZE, "Success\n");
|
|
ret = sizeof("Success");
|
|
} else {
|
|
pr_info("[0x%x] Calibration Fail\n", tfa98xx->i2c->addr);
|
|
snprintf(str, PAGE_SIZE, "Fail\n");
|
|
ret = sizeof("Fail");
|
|
}
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, str, ret);
|
|
kfree(str);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_start_set(struct file *file,
|
|
const char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
int ret = 0;
|
|
char buf[32];
|
|
int buf_size;
|
|
static const char ref[] = "1"; /* "please calibrate now" */
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* check string length, and account for eol */
|
|
if (count > sizeof(ref) + 1 || count < (sizeof(ref) - 1))
|
|
return -EINVAL;
|
|
|
|
buf_size = min(count, (size_t)(sizeof(buf) - 1));
|
|
if (copy_from_user(buf, user_buf, buf_size))
|
|
return -EFAULT;
|
|
buf[buf_size] = 0;
|
|
|
|
/* Compare string, excluding the trailing \0 and the potentials eol */
|
|
if (strncmp(buf, ref, sizeof(ref) - 1)) {
|
|
pr_info("[0x%x] %s: calibration is triggered with %s!\n",
|
|
tfa98xx->i2c->addr, __func__, ref);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = tfa98xx_run_calibration(tfa98xx);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_r_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
char *str;
|
|
uint16_t status;
|
|
int ret;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
|
|
/* Need to ensure DSP is access-able, use mtp read access for this
|
|
* purpose
|
|
*/
|
|
ret = tfa98xx_get_mtp(tfa98xx->tfa, &status);
|
|
if (ret) {
|
|
ret = -EIO;
|
|
pr_err("[0x%x] MTP read failed\n", tfa98xx->i2c->addr);
|
|
goto r_c_err;
|
|
}
|
|
|
|
ret = tfa_run_speaker_calibration(tfa98xx->tfa);
|
|
if (ret) {
|
|
ret = -EIO;
|
|
pr_err("[0x%x] calibration failed\n", tfa98xx->i2c->addr);
|
|
goto r_c_err;
|
|
}
|
|
|
|
str = kmalloc(PAGE_SIZE, GFP_KERNEL);
|
|
if (!str) {
|
|
ret = -ENOMEM;
|
|
pr_err("[0x%x] memory allocation failed\n", tfa98xx->i2c->addr);
|
|
goto r_c_err;
|
|
}
|
|
|
|
if (tfa98xx->tfa->spkr_count > 1) {
|
|
ret = snprintf(str, PAGE_SIZE,
|
|
"Prim:%d mOhms, Sec:%d mOhms\n",
|
|
tfa98xx->tfa->mohm[0],
|
|
tfa98xx->tfa->mohm[1]);
|
|
} else {
|
|
ret = snprintf(str, PAGE_SIZE,
|
|
"Prim:%d mOhms\n",
|
|
tfa98xx->tfa->mohm[0]);
|
|
}
|
|
|
|
pr_debug("[0x%x] calib_done: %s", tfa98xx->i2c->addr, str);
|
|
|
|
if (ret < 0)
|
|
goto r_err;
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, str, ret);
|
|
|
|
r_err:
|
|
kfree(str);
|
|
r_c_err:
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_version_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
char str[] = TFA98XX_VERSION "\n";
|
|
int ret;
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, str, sizeof(str));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_dsp_state_get(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
int ret = 0;
|
|
char *str;
|
|
|
|
switch (tfa98xx->dsp_init) {
|
|
case TFA98XX_DSP_INIT_STOPPED:
|
|
str = "Stopped\n";
|
|
break;
|
|
case TFA98XX_DSP_INIT_RECOVER:
|
|
str = "Recover requested\n";
|
|
break;
|
|
case TFA98XX_DSP_INIT_FAIL:
|
|
str = "Failed init\n";
|
|
break;
|
|
case TFA98XX_DSP_INIT_PENDING:
|
|
str = "Pending init\n";
|
|
break;
|
|
case TFA98XX_DSP_INIT_DONE:
|
|
str = "Init complete\n";
|
|
break;
|
|
default:
|
|
str = "Invalid\n";
|
|
break;
|
|
}
|
|
|
|
pr_debug("[0x%x] dsp_state : %s\n", tfa98xx->i2c->addr, str);
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, str, strlen(str));
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_dsp_state_set(struct file *file,
|
|
const char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
enum tfa_error ret;
|
|
char buf[32];
|
|
static const char start_cmd[] = "start";
|
|
static const char stop_cmd[] = "stop";
|
|
static const char mon_start_cmd[] = "monitor start";
|
|
static const char mon_stop_cmd[] = "monitor stop";
|
|
int buf_size;
|
|
|
|
buf_size = min(count, (size_t)(sizeof(buf) - 1));
|
|
if (copy_from_user(buf, user_buf, buf_size))
|
|
return -EFAULT;
|
|
buf[buf_size] = 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Compare strings, excluding the trailing \0 */
|
|
if (!strncmp(buf, start_cmd, sizeof(start_cmd) - 1)) {
|
|
pr_info("[0x%x] Manual triggering of dsp start...\n",
|
|
tfa98xx->i2c->addr);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
ret = tfa98xx_tfa_start(tfa98xx,
|
|
tfa98xx->profile, tfa98xx->vstep);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
pr_debug("[0x%x] tfa_dev_start complete: %d\n",
|
|
tfa98xx->i2c->addr, ret);
|
|
} else if (!strncmp(buf, stop_cmd, sizeof(stop_cmd) - 1)) {
|
|
pr_info("[0x%x] Manual triggering of dsp stop...\n",
|
|
tfa98xx->i2c->addr);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
ret = tfa_dev_stop(tfa98xx->tfa);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
pr_debug("[0x%x] tfa_dev_stop complete: %d\n",
|
|
tfa98xx->i2c->addr, ret);
|
|
} else if (!strncmp(buf, mon_start_cmd,
|
|
sizeof(mon_start_cmd) - 1)) {
|
|
pr_info("[0x%x] Manual start of monitor thread...\n",
|
|
tfa98xx->i2c->addr);
|
|
tfa98xx_monitor_count = -1;
|
|
queue_delayed_work(tfa98xx->tfa98xx_wq,
|
|
&tfa98xx->monitor_work, HZ);
|
|
} else if (!strncmp(buf, mon_stop_cmd,
|
|
sizeof(mon_stop_cmd) - 1)) {
|
|
pr_info("[0x%x] Manual stop of monitor thread...\n",
|
|
tfa98xx->i2c->addr);
|
|
cancel_delayed_work_sync(&tfa98xx->monitor_work);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_fw_state_get(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
char *str;
|
|
|
|
switch (tfa98xx->dsp_fw_state) {
|
|
case TFA98XX_DSP_FW_NONE:
|
|
str = "None\n";
|
|
break;
|
|
case TFA98XX_DSP_FW_PENDING:
|
|
str = "Pending\n";
|
|
break;
|
|
case TFA98XX_DSP_FW_FAIL:
|
|
str = "Fail\n";
|
|
break;
|
|
case TFA98XX_DSP_FW_OK:
|
|
str = "Ok\n";
|
|
break;
|
|
default:
|
|
str = "Invalid\n";
|
|
break;
|
|
}
|
|
|
|
pr_debug("[0x%x] fw_state : %s", tfa98xx->i2c->addr, str);
|
|
|
|
return simple_read_from_buffer(user_buf, count, ppos, str, strlen(str));
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_rpc_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
int ret = 0;
|
|
uint8_t *buffer;
|
|
enum tfa98xx_error error;
|
|
struct tfa_device *tfa0 = NULL;
|
|
|
|
if (tfa98xx->tfa == NULL) {
|
|
pr_debug("[0x%x] dsp is not available\n", tfa98xx->i2c->addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (count == 0)
|
|
return 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (tfa98xx->pstream == 0
|
|
|| tfa98xx->tfa->is_configured <= 0) {
|
|
pr_info("%s: skipped - tfadsp is not active!\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
buffer = kmalloc(count, GFP_KERNEL);
|
|
if (buffer == NULL) {
|
|
ret = -ENOMEM;
|
|
pr_debug("[0x%x] can not allocate memory\n",
|
|
tfa98xx->i2c->addr);
|
|
return ret;
|
|
}
|
|
|
|
tfa0 = tfa98xx->tfa;
|
|
|
|
pr_info("%s called (count %d)\n", __func__, (int)count);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
error = dsp_msg_read(tfa0, count, buffer);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
if (error != TFA98XX_ERROR_OK) {
|
|
pr_debug("[0x%x] dsp_msg_read error: %d\n",
|
|
tfa98xx->i2c->addr, error);
|
|
kfree(buffer);
|
|
return -EFAULT;
|
|
}
|
|
|
|
ret = copy_to_user(user_buf, buffer, count);
|
|
kfree(buffer);
|
|
if (ret)
|
|
return -EFAULT;
|
|
|
|
*ppos += count;
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_rpc_send(struct file *file,
|
|
const char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
struct tfa_file_dsc *msg_file;
|
|
enum tfa98xx_error error;
|
|
struct tfa_device *tfa0 = NULL;
|
|
int ret = 0;
|
|
|
|
if (tfa98xx->tfa == NULL) {
|
|
pr_debug("[0x%x] dsp is not available\n", tfa98xx->i2c->addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (count == 0)
|
|
return 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (tfa98xx->pstream == 0
|
|
|| tfa98xx->tfa->is_configured <= 0) {
|
|
pr_info("%s: skipped - tfadsp is not active!\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* msg_file.name is not used */
|
|
msg_file = kmalloc(count + sizeof(struct tfa_file_dsc), GFP_KERNEL);
|
|
if (msg_file == NULL) {
|
|
ret = -ENOMEM;
|
|
pr_debug("[0x%x] can not allocate memory\n",
|
|
tfa98xx->i2c->addr);
|
|
return ret;
|
|
}
|
|
msg_file->size = (uint32_t)count;
|
|
|
|
tfa0 = tfa98xx->tfa;
|
|
|
|
if (copy_from_user(msg_file->data, user_buf, count)) {
|
|
kfree(msg_file);
|
|
return -EFAULT;
|
|
}
|
|
|
|
pr_info("%s called\n", __func__);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa0->individual_msg = 1;
|
|
if ((msg_file->data[0] == 'M') && (msg_file->data[1] == 'G')) {
|
|
/* int vstep_idx, int vstep_msg_idx both 0 */
|
|
error = tfa_cont_write_file(tfa0,
|
|
msg_file, 0, 0);
|
|
if (error != TFA98XX_ERROR_OK) {
|
|
pr_debug("[0x%x] tfa_cont_write_file error: %d\n",
|
|
tfa98xx->i2c->addr, error);
|
|
ret = -EIO;
|
|
}
|
|
} else {
|
|
error = dsp_msg(tfa0, msg_file->size, msg_file->data);
|
|
if (error != TFA98XX_ERROR_OK) {
|
|
pr_debug("[0x%x] dsp_msg error: %d\n",
|
|
tfa98xx->i2c->addr, error);
|
|
ret = -EIO;
|
|
}
|
|
}
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
kfree(msg_file);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
/* -- RPC */
|
|
|
|
/* ++ DSP message fops */
|
|
static ssize_t tfa98xx_dbgfs_dsp_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
enum tfa98xx_error error;
|
|
int ret = 0;
|
|
uint8_t *buffer;
|
|
struct tfa_device *tfa0 = NULL;
|
|
|
|
if (tfa98xx->tfa == NULL) {
|
|
pr_debug("[0x%x] dsp is not available\n", tfa98xx->i2c->addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (count == 0)
|
|
return 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (tfa98xx->pstream == 0
|
|
|| tfa98xx->tfa->is_configured <= 0) {
|
|
pr_info("%s: skipped - tfadsp is not active!\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
buffer = kmalloc(count, GFP_KERNEL);
|
|
if (buffer == NULL) {
|
|
ret = -ENOMEM;
|
|
pr_debug("[0x%x] can not allocate memory\n",
|
|
tfa98xx->i2c->addr);
|
|
return ret;
|
|
}
|
|
|
|
tfa0 = tfa98xx->tfa;
|
|
|
|
pr_info("%s called (count %d)\n", __func__, (int)count);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
error = dsp_msg_read(tfa0, count, buffer);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
if (error) {
|
|
pr_debug("[0x%x] dsp_msg_read error: %d\n",
|
|
tfa98xx->i2c->addr, error);
|
|
kfree(buffer);
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* ret = simple_read_from_buffer
|
|
* (user_buf, count, ppos, buffer, count);
|
|
*/
|
|
ret = copy_to_user(user_buf, buffer, count);
|
|
if (ret) {
|
|
pr_debug("[0x%x] cannot copy buffer to user: %d\n",
|
|
tfa98xx->i2c->addr, ret);
|
|
kfree(buffer);
|
|
return -EFAULT;
|
|
}
|
|
|
|
kfree(buffer);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_dsp_write(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
enum tfa98xx_error error;
|
|
int ret = 0;
|
|
struct tfa_device *tfa0 = NULL;
|
|
uint8_t *buffer;
|
|
|
|
if (tfa98xx->tfa == NULL) {
|
|
pr_debug("[0x%x] dsp is not available\n", tfa98xx->i2c->addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (count == 0)
|
|
return 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (tfa98xx->pstream == 0
|
|
|| tfa98xx->tfa->is_configured <= 0) {
|
|
pr_info("%s: skipped - tfadsp is not active!\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
buffer = kmalloc(count, GFP_KERNEL);
|
|
if (buffer == NULL) {
|
|
ret = -ENOMEM;
|
|
pr_debug("[0x%x] can not allocate memory\n",
|
|
tfa98xx->i2c->addr);
|
|
return ret;
|
|
}
|
|
|
|
tfa0 = tfa98xx->tfa;
|
|
|
|
ret = copy_from_user(buffer, user_buf, count);
|
|
if (ret) {
|
|
pr_debug("[0x%x] cannot copy buffer from user: %d\n",
|
|
tfa98xx->i2c->addr, ret);
|
|
kfree(buffer);
|
|
return -EFAULT;
|
|
}
|
|
|
|
pr_info("%s called\n", __func__);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa0->individual_msg = 1;
|
|
error = dsp_msg(tfa0, count, buffer);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
if (error) {
|
|
pr_debug("[0x%x] dsp_msg error: %d\n",
|
|
tfa98xx->i2c->addr, error);
|
|
kfree(buffer);
|
|
return -EFAULT;
|
|
}
|
|
|
|
kfree(buffer);
|
|
|
|
return count;
|
|
}
|
|
/* -- DSP */
|
|
|
|
static ssize_t tfa98xx_dbgfs_spkr_damaged_get(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
int ret = 0;
|
|
char *str;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
str = kmalloc(count, GFP_KERNEL);
|
|
if (str == NULL) {
|
|
ret = -ENOMEM;
|
|
pr_debug("[0x%x] can not allocate memory\n",
|
|
tfa98xx->i2c->addr);
|
|
return ret;
|
|
}
|
|
|
|
scnprintf(str, PAGE_SIZE, "%s\n",
|
|
(tfa98xx->tfa->spkr_damaged == 1)
|
|
? "damaged" : "ready");
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, str, strlen(str));
|
|
|
|
kfree(str);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tfa98xx_dbgfs_pga_gain_get(void *data, u64 *val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
unsigned int value;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
value = tfa_get_pga_gain(tfa98xx->tfa);
|
|
if (value < 0)
|
|
return -EINVAL;
|
|
*val = value;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_dbgfs_pga_gain_set(void *data, u64 val)
|
|
{
|
|
struct i2c_client *i2c = (struct i2c_client *)data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
uint16_t value;
|
|
int err;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
value = val & 0xffff;
|
|
if (value > 7)
|
|
return -EINVAL;
|
|
|
|
err = tfa_set_pga_gain(tfa98xx->tfa, value);
|
|
if (err < 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_trace_level_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
char out_buf[4] = {0};
|
|
int ret = 0;
|
|
|
|
if (count < 1) {
|
|
pr_err("%s: read size exceeds buf size %zd\n", __func__, count);
|
|
return 0;
|
|
}
|
|
snprintf(out_buf, 4, "%d\n", trace_level);
|
|
|
|
ret = simple_read_from_buffer(user_buf,
|
|
count, ppos, out_buf, sizeof(out_buf));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_trace_level_write(struct file *file,
|
|
const char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
int tl = 0;
|
|
char buf[2] = {0};
|
|
|
|
if (copy_from_user(buf, user_buf, 1))
|
|
return -EFAULT;
|
|
|
|
tl = buf[0] - 48;
|
|
pr_info("%s: trace_level = %d\n", __func__, tl);
|
|
if (tl < 0 || tl > 15)
|
|
return -EFAULT;
|
|
|
|
trace_level = tl;
|
|
tfa98xx_kmsg_regs = trace_level & 2;
|
|
tfa98xx_ftrace_regs = trace_level & 4;
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
if (tfa98xx && tfa98xx->tfa)
|
|
tfa98xx->tfa->verbose = trace_level & 1;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_dbgfs_show_cal_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct i2c_client *i2c = file->private_data;
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
|
|
int mtp = 0;
|
|
int mtpex = 0;
|
|
char out_buf[64] = {0};
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (count < 1) {
|
|
pr_err("%s: read size exceeds buf size %zd\n", __func__, count);
|
|
return 0;
|
|
}
|
|
|
|
mtp = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_RE25);
|
|
mtpex = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_EX);
|
|
|
|
snprintf(out_buf, 64, "[%s] MTPEX: %d, MTP: %d mOhm\n",
|
|
tfa_cont_device_name(tfa98xx->tfa->cnt, tfa98xx->tfa->dev_idx),
|
|
mtpex, mtp);
|
|
|
|
return simple_read_from_buffer(user_buf,
|
|
count, ppos, out_buf, sizeof(out_buf));
|
|
}
|
|
|
|
/* Direct registers access - provide register address in hex */
|
|
#define TFA98XX_DEBUGFS_REG_SET(__reg) \
|
|
static int tfa98xx_dbgfs_reg_##__reg##_set(void *data, u64 val)\
|
|
{\
|
|
struct i2c_client *i2c = (struct i2c_client *)data;\
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);\
|
|
unsigned int ret, value;\
|
|
\
|
|
ret = regmap_write(tfa98xx->regmap, 0x##__reg, (val & 0xffff));\
|
|
value = val & 0xffff;\
|
|
return 0;\
|
|
} \
|
|
static int tfa98xx_dbgfs_reg_##__reg##_get(void *data, u64 *val)\
|
|
{\
|
|
struct i2c_client *i2c = (struct i2c_client *)data;\
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);\
|
|
unsigned int value;\
|
|
int ret;\
|
|
\
|
|
ret = regmap_read(tfa98xx->regmap, 0x##__reg, &value);\
|
|
*val = value;\
|
|
return 0;\
|
|
} \
|
|
DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_reg_##__reg##_fops,\
|
|
tfa98xx_dbgfs_reg_##__reg##_get,\
|
|
tfa98xx_dbgfs_reg_##__reg##_set, "0x%llx\n")
|
|
|
|
#define VAL(str) #str
|
|
#define TOSTRING(str) VAL(str)
|
|
#define TFA98XX_DEBUGFS_REG_CREATE_FILE(__reg, __name, dbg_dir, i2c) \
|
|
debugfs_create_file(TOSTRING(__reg) "-" TOSTRING(__name),\
|
|
0664, dbg_dir, i2c,\
|
|
&tfa98xx_dbgfs_reg_##__reg##_fops)
|
|
|
|
TFA98XX_DEBUGFS_REG_SET(00);
|
|
TFA98XX_DEBUGFS_REG_SET(01);
|
|
TFA98XX_DEBUGFS_REG_SET(02);
|
|
TFA98XX_DEBUGFS_REG_SET(03);
|
|
TFA98XX_DEBUGFS_REG_SET(04);
|
|
TFA98XX_DEBUGFS_REG_SET(05);
|
|
TFA98XX_DEBUGFS_REG_SET(06);
|
|
TFA98XX_DEBUGFS_REG_SET(07);
|
|
TFA98XX_DEBUGFS_REG_SET(08);
|
|
TFA98XX_DEBUGFS_REG_SET(09);
|
|
TFA98XX_DEBUGFS_REG_SET(0A);
|
|
TFA98XX_DEBUGFS_REG_SET(0B);
|
|
TFA98XX_DEBUGFS_REG_SET(0F);
|
|
TFA98XX_DEBUGFS_REG_SET(10);
|
|
TFA98XX_DEBUGFS_REG_SET(11);
|
|
TFA98XX_DEBUGFS_REG_SET(12);
|
|
TFA98XX_DEBUGFS_REG_SET(13);
|
|
TFA98XX_DEBUGFS_REG_SET(22);
|
|
TFA98XX_DEBUGFS_REG_SET(25);
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_calib_otc_fops,
|
|
tfa98xx_dbgfs_otc_get,
|
|
tfa98xx_dbgfs_otc_set, "%llu\n");
|
|
DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_calib_mtpex_fops,
|
|
tfa98xx_dbgfs_mtpex_get,
|
|
tfa98xx_dbgfs_mtpex_set, "%llu\n");
|
|
DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_calib_temp_fops,
|
|
tfa98xx_dbgfs_temp_get,
|
|
tfa98xx_dbgfs_temp_set, "%llu\n");
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_pga_gain_fops,
|
|
tfa98xx_dbgfs_pga_gain_get,
|
|
tfa98xx_dbgfs_pga_gain_set, "%llu\n");
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_calib_start_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_start_get,
|
|
.write = tfa98xx_dbgfs_start_set,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_r_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_r_read,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_version_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_version_read,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_dsp_state_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_dsp_state_get,
|
|
.write = tfa98xx_dbgfs_dsp_state_set,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_fw_state_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_fw_state_get,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_rpc_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_rpc_read,
|
|
.write = tfa98xx_dbgfs_rpc_send,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_dsp_fops = {
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_dsp_read,
|
|
.write = tfa98xx_dbgfs_dsp_write,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_spkr_damaged_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_spkr_damaged_get,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_trace_level_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_trace_level_read,
|
|
.write = tfa98xx_dbgfs_trace_level_write,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static const struct file_operations tfa98xx_dbgfs_show_cal_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = tfa98xx_dbgfs_show_cal_read,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static void tfa98xx_debug_init(struct tfa98xx *tfa98xx, struct i2c_client *i2c)
|
|
{
|
|
char name[50];
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME, "%s-%x", i2c->name, i2c->addr);
|
|
tfa98xx->dbg_dir = debugfs_create_dir(name, NULL);
|
|
debugfs_create_file("OTC", 0664, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_calib_otc_fops);
|
|
debugfs_create_file("MTPEX", 0664, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_calib_mtpex_fops);
|
|
debugfs_create_file("TEMP", 0664, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_calib_temp_fops);
|
|
debugfs_create_file("calibrate", 0664, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_calib_start_fops);
|
|
debugfs_create_file("R", 0444, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_r_fops);
|
|
debugfs_create_file("version", 0444, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_version_fops);
|
|
debugfs_create_file("dsp-state", 0664, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_dsp_state_fops);
|
|
debugfs_create_file("fw-state", 0664, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_fw_state_fops);
|
|
debugfs_create_file("rpc", 0664, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_rpc_fops);
|
|
debugfs_create_file("dsp", 0644, tfa98xx->dbg_dir,
|
|
i2c, &tfa98xx_dbgfs_dsp_fops);
|
|
|
|
if (tfa98xx->flags & TFA98XX_FLAG_SAAM_AVAILABLE) {
|
|
dev_dbg(tfa98xx->dev, "Adding pga_gain debug interface\n");
|
|
debugfs_create_file("pga_gain", 0444, tfa98xx->dbg_dir,
|
|
tfa98xx->i2c,
|
|
&tfa98xx_dbgfs_pga_gain_fops);
|
|
}
|
|
|
|
debugfs_create_file("trace-level", 0644,
|
|
tfa98xx->dbg_dir,
|
|
tfa98xx->i2c,
|
|
&tfa98xx_dbgfs_trace_level_fops);
|
|
|
|
debugfs_create_file("mtp", 0644,
|
|
tfa98xx->dbg_dir,
|
|
tfa98xx->i2c,
|
|
&tfa98xx_dbgfs_show_cal_fops);
|
|
}
|
|
|
|
static void tfa98xx_debug_remove(struct tfa98xx *tfa98xx)
|
|
{
|
|
debugfs_remove_recursive(tfa98xx->dbg_dir);
|
|
}
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
static void tfa98xx_check_calibration(struct tfa98xx *tfa98xx)
|
|
{
|
|
unsigned short value = 0;
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
value = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_EX);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (value >= 0) {
|
|
tfa98xx->calibrate_done =
|
|
(value) ? 1 : 0;
|
|
pr_info("[0x%x] calibrate_done = MTPEX (%d)\n",
|
|
tfa98xx->i2c->addr, tfa98xx->calibrate_done);
|
|
|
|
} else {
|
|
pr_info("[0x%x] error in reading MTPEX\n",
|
|
tfa98xx->i2c->addr);
|
|
tfa98xx->calibrate_done = 0;
|
|
}
|
|
}
|
|
|
|
enum tfa98xx_error tfa98xx_set_tfadsp_bypass(struct tfa_device *tfa)
|
|
{
|
|
enum tfa98xx_error err = TFA98XX_ERROR_OK;
|
|
int res_len = 3;
|
|
unsigned char buf[3] = {0};
|
|
int data[2], is_configured = 0;
|
|
|
|
res_len = 3;
|
|
err = tfa_dsp_cmd_id_write_read(tfa, MODULE_CUSTOM,
|
|
CUSTOM_PARAM_GET_CONFIGURED, res_len, buf);
|
|
if (err == TFA98XX_ERROR_OK) {
|
|
tfa98xx_convert_bytes2data(res_len, buf, data);
|
|
is_configured = data[0];
|
|
|
|
pr_info("%s: check if configured (%d)\n",
|
|
__func__, is_configured);
|
|
}
|
|
|
|
/* move on if not configured */
|
|
if (!is_configured)
|
|
return err;
|
|
|
|
pr_info("%s: set bypass if configured\n",
|
|
__func__);
|
|
|
|
memset(buf, 0, 3); /* dummy value */
|
|
tfa->individual_msg = 1;
|
|
err = tfa_dsp_cmd_id_write(tfa, MODULE_CUSTOM,
|
|
CUSTOM_PARAM_SET_BYPASS, 3, buf);
|
|
if (err != TFA98XX_ERROR_OK)
|
|
pr_info("%s: error in setting bypass (err = %d)\n",
|
|
__func__, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tfa98xx_run_calibration(struct tfa98xx *tfa98xx0)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa;
|
|
enum tfa_error ret, cal_err = tfa_error_ok;
|
|
int idx, ndev = tfa98xx_device_count;
|
|
int cal_profile = 0;
|
|
u64 otc_val = 1; /* calibration once by default */
|
|
u16 temp_val = DEFAULT_REF_TEMP; /* default */
|
|
int mtpex[MAX_HANDLES] = {0};
|
|
int re25;
|
|
int temp_calflag = 0;
|
|
|
|
pr_info("%s: begin\n", __func__);
|
|
|
|
if (tfa98xx0->pstream == 0) {
|
|
pr_info("[0x%x] %s: calibration is available only when channel is enabled!\n",
|
|
tfa98xx0->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* EXT_TEMP */
|
|
ret = tfa98xx_read_reference_temp(&temp_val);
|
|
if (ret) {
|
|
pr_err("%s: error in reading reference temp\n",
|
|
__func__);
|
|
temp_val = DEFAULT_REF_TEMP; /* default */
|
|
}
|
|
|
|
if (tfa98xx0->tfa->is_bypass)
|
|
pr_debug("%s: skipped setting bypass - tfadsp in bypass\n",
|
|
__func__);
|
|
else
|
|
tfa98xx_set_tfadsp_bypass(tfa98xx0->tfa);
|
|
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
tfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
if (tfa->vval_active) {
|
|
mtpex[idx] = tfa_dev_mtp_get(tfa, TFA_MTP_EX);
|
|
pr_info("%s: dev %d - storing MTP (%d -> 0)\n",
|
|
__func__, idx, mtpex[idx]);
|
|
}
|
|
|
|
pr_info("%s: dev %d - resetting MTP\n", __func__, idx);
|
|
|
|
/* OTC <0:always 1:once> */
|
|
ret = tfa_dev_mtp_set(tfa, TFA_MTP_OTC, otc_val);
|
|
if (ret)
|
|
pr_info("setting OTC failed (%d)\n", ret);
|
|
/* MTPEX <reset to force to calibrate> */
|
|
ret = tfa_dev_mtp_set(tfa, TFA_MTP_EX, 0);
|
|
if (ret) {
|
|
pr_info("resetting MTPEX failed (%d)\n", ret);
|
|
/* suspend until TFA98xx is active */
|
|
tfa->reset_mtpex = 1;
|
|
}
|
|
if (!tfa->vval_active) {
|
|
/* MTPEX <reset to force to calibrate> */
|
|
ret = tfa_dev_mtp_set(tfa, TFA_MTP_RE25, 0);
|
|
/* EXT_TEMP */
|
|
tfa98xx_set_exttemp(tfa, temp_val);
|
|
}
|
|
|
|
pr_info("%s: dev %d - force to enable auto calibration (%s -> enabled)",
|
|
__func__, idx,
|
|
(tfa->disable_auto_cal) ? "disabled" : "enabled");
|
|
/* enable auto calibration */
|
|
temp_calflag |= tfa->disable_auto_cal;
|
|
tfa->disable_auto_cal = 0;
|
|
|
|
/* force to enable all the devices */
|
|
if (tfa->dev_count <= MAX_CHANNELS)
|
|
tfa->set_active = 1;
|
|
|
|
/* force to mute amplifier to flush buffer */
|
|
tfa_run_mute(tfa);
|
|
}
|
|
|
|
/* wait before restarting for calibration */
|
|
msleep_interruptible(10);
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
pr_info("%s: dev %d - stopping devices\n",
|
|
__func__, tfa98xx->tfa->dev_idx);
|
|
|
|
_tfa98xx_stop(tfa98xx);
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
|
|
tfa98xx->calibrate_done = 0;
|
|
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_PENDING;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
pr_info("%s: calibration started!\n", __func__);
|
|
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
tfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
pr_info("%s: dev %d - starting devices for calibration\n",
|
|
__func__, idx);
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
|
|
cal_profile = tfa_cont_get_cal_profile(tfa98xx->tfa);
|
|
if (cal_profile < 0) {
|
|
pr_warn("[0x%x] no cal profile is defined!\n",
|
|
tfa98xx->i2c->addr);
|
|
/* use current profile if there's no cal profile */
|
|
cal_profile = tfa98xx->profile;
|
|
}
|
|
|
|
ret = tfa98xx_tfa_start(tfa98xx, cal_profile, tfa98xx->vstep);
|
|
if (ret != tfa_error_ok) {
|
|
pr_warn("[0x%x] failure in starting device for calibration! (err %d)\n",
|
|
tfa98xx->i2c->addr, ret);
|
|
cal_err |= ret;
|
|
}
|
|
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_DONE;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
tfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
if (tfa->vval_active) {
|
|
pr_info("%s: dev %d - restoring MTP (0 -> %d)\n",
|
|
__func__, idx, mtpex[idx]);
|
|
|
|
ret = tfa_dev_mtp_set(tfa, TFA_MTP_EX, mtpex[idx]);
|
|
if (ret)
|
|
pr_info("restoring MTPEX failed (%d)\n", ret);
|
|
|
|
mtpex[idx] = tfa_dev_mtp_get(tfa, TFA_MTP_EX);
|
|
re25 = tfa_dev_mtp_get(tfa, TFA_MTP_RE25);
|
|
pr_info("%s: dev %d - readback MTP (%d, %d)\n",
|
|
__func__, idx, mtpex[idx], re25);
|
|
}
|
|
}
|
|
|
|
pr_info("%s: restore flag for auto calibration (enabled -> %s)",
|
|
__func__,
|
|
(temp_calflag) ? "disabled" : "enabled");
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
tfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
/* restore flag for auto calibration */
|
|
tfa->disable_auto_cal = temp_calflag;
|
|
}
|
|
|
|
if (cal_err) {
|
|
pr_info("%s: calibration failed! (err %d)\n",
|
|
__func__, cal_err);
|
|
/* do not return error in case of V validation */
|
|
if (tfa98xx0->tfa->vval_active)
|
|
return 0;
|
|
}
|
|
|
|
pr_info("%s: calibration started!\n", __func__);
|
|
pr_info("%s: end\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
enum tfa98xx_error tfa98xx_read_reference_temp(short *value)
|
|
{
|
|
struct power_supply *psy = NULL;
|
|
union power_supply_propval prop_read = {0};
|
|
int ret = 0;
|
|
|
|
/* get power supply of "battery" */
|
|
/* value is preserved with default when error happens */
|
|
psy = power_supply_get_by_name(REF_TEMP_DEVICE_NAME);
|
|
if (!psy) {
|
|
pr_err("%s: failed to get power supply\n", __func__);
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
ret = power_supply_get_property(psy,
|
|
POWER_SUPPLY_PROP_TEMP, &prop_read);
|
|
if (ret) {
|
|
pr_err("%s: failed to get temp property\n", __func__);
|
|
if (psy)
|
|
power_supply_put(psy);
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
*value = (short)(prop_read.intval / 10); /* in degC */
|
|
pr_info("%s: read temp (%d) from %s\n",
|
|
__func__, *value, REF_TEMP_DEVICE_NAME);
|
|
if (psy)
|
|
power_supply_put(psy);
|
|
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
|
|
static void tfa98xx_set_dsp_configured(struct tfa98xx *tfa98xx)
|
|
{
|
|
int is_configured; /* reset by default */
|
|
|
|
is_configured = tfa98xx->tfa->is_configured;
|
|
|
|
switch (tfa98xx->dsp_init) {
|
|
case TFA98XX_DSP_INIT_DONE:
|
|
case TFA98XX_DSP_INIT_RECOVER:
|
|
/* set working if already running */
|
|
is_configured = 1;
|
|
break;
|
|
case TFA98XX_DSP_INIT_INVALIDATED:
|
|
/* preserve state except pstream off */
|
|
if (tfa98xx->pstream == 0)
|
|
is_configured = 0;
|
|
break;
|
|
case TFA98XX_DSP_INIT_STOPPED:
|
|
if (tfa98xx->tfa->is_probus_device) {
|
|
/* preserve state except pstream off */
|
|
if (tfa98xx->pstream == 0)
|
|
is_configured = 0;
|
|
} else {
|
|
/* reset for embedded DSP case */
|
|
is_configured = 0;
|
|
}
|
|
break;
|
|
case TFA98XX_DSP_INIT_FAIL:
|
|
is_configured = -1;
|
|
break;
|
|
case TFA98XX_DSP_INIT_PENDING:
|
|
default:
|
|
is_configured = 0;
|
|
break;
|
|
}
|
|
|
|
pr_debug("[0x%x] dsp_init %d, is_configured %d\n",
|
|
tfa98xx->i2c->addr,
|
|
tfa98xx->dsp_init, is_configured);
|
|
|
|
tfa98xx->tfa->is_configured = is_configured;
|
|
}
|
|
|
|
static int tfa98xx_get_vstep(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component
|
|
= snd_soc_kcontrol_component(kcontrol);
|
|
struct tfa98xx *tfa98xx = snd_soc_component_get_drvdata(component);
|
|
int mixer_profile = kcontrol->private_value;
|
|
int ret = 0;
|
|
int profile;
|
|
|
|
profile = get_profile_id_for_sr(mixer_profile, tfa98xx->rate);
|
|
if (profile < 0) {
|
|
pr_err("%s: invalid profile %d (mixer_profile=%d, rate=%d)\n",
|
|
__func__, profile, mixer_profile, tfa98xx->rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
int vstep = tfa98xx->prof_vsteps[profile];
|
|
|
|
ucontrol->value.integer.value[tfa98xx->tfa->dev_idx]
|
|
= tfa_cont_get_max_vstep(tfa98xx->tfa, profile)
|
|
- vstep - 1;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tfa98xx_set_vstep(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component
|
|
= snd_soc_kcontrol_component(kcontrol);
|
|
struct tfa98xx *tfa98xx = snd_soc_component_get_drvdata(component);
|
|
int mixer_profile = kcontrol->private_value;
|
|
int profile;
|
|
int err = 0;
|
|
int change = 0;
|
|
|
|
if (no_start != 0)
|
|
return 0;
|
|
|
|
profile = get_profile_id_for_sr(mixer_profile, tfa98xx->rate);
|
|
if (profile < 0) {
|
|
pr_err("%s: invalid profile %d (mixer_profile=%d, rate=%d)\n",
|
|
__func__, profile, mixer_profile, tfa98xx->rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* wait until when DSP is ready for initialization */
|
|
if (tfa98xx->pstream == 0 && tfa98xx->samstream == 0) {
|
|
pr_info("%s: tfa_start is suspended unless p/samstream is on\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
int vstep, vsteps;
|
|
int ready = 0;
|
|
int new_vstep;
|
|
int value = ucontrol->value
|
|
.integer.value[tfa98xx->tfa->dev_idx];
|
|
|
|
vstep = tfa98xx->prof_vsteps[profile];
|
|
vsteps = tfa_cont_get_max_vstep(tfa98xx->tfa, profile);
|
|
|
|
if (vstep == vsteps - value - 1)
|
|
continue;
|
|
|
|
new_vstep = vsteps - value - 1;
|
|
|
|
if (new_vstep < 0)
|
|
new_vstep = 0;
|
|
|
|
tfa98xx->prof_vsteps[profile] = new_vstep;
|
|
|
|
if (profile == tfa98xx->profile) {
|
|
/* this is the active profile, program the new vstep */
|
|
tfa98xx->vstep = new_vstep;
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa98xx_dsp_system_stable(tfa98xx->tfa, &ready);
|
|
|
|
if (ready) {
|
|
err = tfa98xx_tfa_start(tfa98xx,
|
|
tfa98xx->profile, tfa98xx->vstep);
|
|
if (err) {
|
|
pr_err("Write vstep error: %d\n", err);
|
|
} else {
|
|
pr_debug("Successfully changed vstep index!\n");
|
|
change = 1;
|
|
}
|
|
}
|
|
|
|
/* Set DSP status as profile change may invalidate
|
|
* current DSP configuration. Next stream start can
|
|
* trigger a tfa_dev_start.
|
|
*/
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_INVALIDATED;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
pr_debug("%d: vstep:%d, (control value: %d) - profile %d\n",
|
|
tfa98xx->tfa->dev_idx, new_vstep, value, profile);
|
|
}
|
|
|
|
if (!change) {
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
return change;
|
|
}
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
if (tfa98xx->tfa->spkgain != -1) {
|
|
pr_info("%s: set speaker gain 0x%x\n",
|
|
__func__, tfa98xx->tfa->spkgain);
|
|
TFA7x_SET_BF(tfa98xx->tfa, TDMSPKG,
|
|
tfa98xx->tfa->spkgain);
|
|
}
|
|
|
|
pr_info("%s: UNMUTE dev %d\n",
|
|
__func__, tfa98xx->tfa->dev_idx);
|
|
tfa_dev_set_state(tfa98xx->tfa, TFA_STATE_UNMUTE, 0);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return change;
|
|
}
|
|
|
|
static int tfa98xx_info_vstep(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct snd_soc_component *component
|
|
= snd_soc_kcontrol_component(kcontrol);
|
|
struct tfa98xx *tfa98xx = snd_soc_component_get_drvdata(component);
|
|
int mixer_profile = tfa98xx_mixer_profile;
|
|
int profile = get_profile_id_for_sr(mixer_profile, tfa98xx->rate);
|
|
|
|
if (profile < 0) {
|
|
pr_err("%s: invalid profile %d (mixer_profile=%d, rate=%d)\n",
|
|
__func__, profile, mixer_profile, tfa98xx->rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max
|
|
= max(0, tfa_cont_get_max_vstep(tfa98xx->tfa, profile) - 1);
|
|
pr_debug("vsteps count: %d [prof=%d]\n",
|
|
tfa_cont_get_max_vstep(tfa98xx->tfa, profile),
|
|
profile);
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_get_profile(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
mutex_lock(&tfa98xx_mutex);
|
|
ucontrol->value.integer.value[0] = tfa98xx_mixer_profile;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_profile(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component
|
|
= snd_soc_kcontrol_component(kcontrol);
|
|
struct tfa98xx *tfa98xx = snd_soc_component_get_drvdata(component);
|
|
int err = 0;
|
|
int change = 0;
|
|
int new_profile;
|
|
int prof_idx, cur_prof_idx;
|
|
int profile_count = tfa98xx_mixer_profiles;
|
|
int profile = tfa98xx_mixer_profile;
|
|
|
|
if (no_start != 0)
|
|
return 0;
|
|
|
|
new_profile = ucontrol->value.integer.value[0];
|
|
if (new_profile == profile)
|
|
return 0;
|
|
|
|
if ((new_profile < 0) || (new_profile >= profile_count)) {
|
|
pr_err("not existing profile (%d)\n", new_profile);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* get the container profile for the requested sample rate */
|
|
prof_idx = get_profile_id_for_sr(new_profile, tfa98xx->rate);
|
|
cur_prof_idx = get_profile_id_for_sr(profile, tfa98xx->rate);
|
|
if (prof_idx < 0 || cur_prof_idx < 0) {
|
|
pr_err("%s: sample rate [%d] not supported for this mixer profile [%d -> %d]\n",
|
|
__func__, tfa98xx->rate, profile, new_profile);
|
|
return 0;
|
|
}
|
|
pr_info("%s: selected container profile [%d -> %d]\n",
|
|
__func__, cur_prof_idx, prof_idx);
|
|
pr_debug("%s: switch profile [%s -> %s]\n", __func__,
|
|
_tfa_cont_profile_name(tfa98xx, cur_prof_idx),
|
|
_tfa_cont_profile_name(tfa98xx, prof_idx));
|
|
|
|
/* update mixer profile */
|
|
tfa98xx_mixer_profile = new_profile;
|
|
|
|
/* wait until when DSP is ready for initialization */
|
|
if (tfa98xx->pstream == 0 && tfa98xx->samstream == 0) {
|
|
pr_info("%s: tfa_start is suspended unless p/samstream is on\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
int ready = 0;
|
|
|
|
/* update 'real' profile (container profile) */
|
|
tfa98xx->profile = prof_idx;
|
|
tfa98xx->vstep = tfa98xx->prof_vsteps[prof_idx];
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
/* Set ready by force, for selective channel control */
|
|
ready = 1;
|
|
if (ready) {
|
|
/* Also re-enables the interrupts */
|
|
pr_info("%s: trigger [dev %d - prof %d]\n", __func__,
|
|
tfa98xx->tfa->dev_idx, prof_idx);
|
|
err = tfa98xx_tfa_start(tfa98xx,
|
|
prof_idx, tfa98xx->vstep);
|
|
if (err) {
|
|
pr_info("Write profile error: %d\n", err);
|
|
} else {
|
|
pr_debug("Changed to profile %d (vstep = %d)\n",
|
|
prof_idx, tfa98xx->vstep);
|
|
change = 1;
|
|
}
|
|
}
|
|
|
|
/* Set DSP status as profile change may invalidate
|
|
* current DSP configuration. Next stream start can
|
|
* trigger a tfa_dev_start.
|
|
*/
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_INVALIDATED;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
if (!change) {
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
return change;
|
|
}
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
if (tfa98xx->tfa->spkgain != -1) {
|
|
pr_info("%s: set speaker gain 0x%x\n",
|
|
__func__, tfa98xx->tfa->spkgain);
|
|
TFA7x_SET_BF(tfa98xx->tfa, TDMSPKG,
|
|
tfa98xx->tfa->spkgain);
|
|
}
|
|
|
|
pr_info("%s: UNMUTE dev %d\n",
|
|
__func__, tfa98xx->tfa->dev_idx);
|
|
tfa_dev_set_state(tfa98xx->tfa, TFA_STATE_UNMUTE, 0);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return change;
|
|
}
|
|
|
|
/* copies the profile basename (i.e. part until .) into buf */
|
|
static void get_profile_basename(char *buf, char *profile)
|
|
{
|
|
int cp_len = 0, idx = 0;
|
|
char *pch;
|
|
|
|
pch = strnchr(profile, strlen(profile), '.');
|
|
idx = pch - profile;
|
|
cp_len = (pch != NULL) ? idx : (int)strlen(profile);
|
|
memcpy(buf, profile, cp_len);
|
|
buf[cp_len] = 0;
|
|
}
|
|
|
|
/* return the profile name accociated with id from the profile list */
|
|
static int get_profile_from_list(char *buf, int id)
|
|
{
|
|
struct tfa98xx_baseprofile *bprof;
|
|
|
|
list_for_each_entry(bprof, &profile_list, list) {
|
|
if (bprof->item_id == id) {
|
|
strlcpy(buf, bprof->basename, MAX_CONTROL_NAME);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return TFA_ERROR;
|
|
}
|
|
|
|
/* search for the profile in the profile list */
|
|
static int is_profile_in_list(char *profile, int len)
|
|
{
|
|
struct tfa98xx_baseprofile *bprof;
|
|
|
|
list_for_each_entry(bprof, &profile_list, list) {
|
|
if ((len == bprof->len)
|
|
&& (strncmp(bprof->basename, profile, len) == 0))
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* for the profile with id, look if the requested samplerate is
|
|
* supported, if found return the (container)profile for this
|
|
* samplerate, on error or if not found return -1
|
|
*/
|
|
static int get_profile_id_for_sr(int id, unsigned int rate)
|
|
{
|
|
int idx = 0;
|
|
struct tfa98xx_baseprofile *bprof;
|
|
|
|
list_for_each_entry(bprof, &profile_list, list) {
|
|
if (id == bprof->item_id) {
|
|
idx = tfa98xx_get_fssel(rate);
|
|
if (idx < 0) {
|
|
/* samplerate not supported */
|
|
return TFA_ERROR;
|
|
}
|
|
|
|
return bprof->sr_rate_sup[idx];
|
|
}
|
|
}
|
|
|
|
/* profile not found */
|
|
return TFA_ERROR;
|
|
}
|
|
|
|
/* check if this profile is a calibration profile */
|
|
static int is_calibration_profile(char *profile)
|
|
{
|
|
if (strnstr(profile, ".cal", strlen(profile)) != NULL)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* adds the (container)profile index of the samplerate found in
|
|
* the (container)profile to a fixed samplerate table in the (mixer)profile
|
|
*/
|
|
static int add_sr_to_profile(struct tfa98xx *tfa98xx,
|
|
char *basename, int len, int profile)
|
|
{
|
|
struct tfa98xx_baseprofile *bprof;
|
|
int idx = 0;
|
|
unsigned int sr = 0;
|
|
unsigned int sr0 = 0xff;
|
|
static int sr_hit;
|
|
|
|
list_for_each_entry(bprof, &profile_list, list) {
|
|
if ((len == bprof->len)
|
|
&& (strncmp(bprof->basename, basename, len) == 0)) {
|
|
/* add supported samplerate for this profile */
|
|
sr = tfa98xx_get_profile_sr(tfa98xx->tfa, profile);
|
|
if (!sr) {
|
|
pr_err("unable to identify supported sample rate for %s\n",
|
|
bprof->basename);
|
|
return TFA_ERROR;
|
|
}
|
|
sr0 = (sr0 == 0xff) ? sr : sr0; /* default rate */
|
|
if (sr_converted == sr) {
|
|
pr_debug("sr_converted: hits (%d)!\n",
|
|
sr_converted);
|
|
sr_hit = 1;
|
|
}
|
|
|
|
/* get the index for this samplerate */
|
|
idx = tfa98xx_get_fssel(sr);
|
|
if (idx < 0 || idx >= TFA98XX_NUM_RATES) {
|
|
pr_err("invalid index for samplerate %d\n",
|
|
idx);
|
|
return TFA_ERROR;
|
|
}
|
|
|
|
/* enter the (container)profile for this samplerate
|
|
* at the corresponding index
|
|
*/
|
|
bprof->sr_rate_sup[idx] = profile;
|
|
|
|
pr_debug("added profile:samplerate = [%d:%d] for mixer profile: %s\n",
|
|
profile, sr, bprof->basename);
|
|
}
|
|
}
|
|
|
|
if (!sr_hit && sr0 != 0xff) {
|
|
pr_info("sr_converted: use %d, as %d does not exist\n",
|
|
sr0, sr_converted);
|
|
sr_converted = sr0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_info_profile(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
char profile_name[MAX_CONTROL_NAME] = {0};
|
|
int count = tfa98xx_mixer_profiles, err = -1;
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.enumerated.items = count;
|
|
|
|
if (uinfo->value.enumerated.item >= count)
|
|
uinfo->value.enumerated.item = count - 1;
|
|
|
|
err = get_profile_from_list(profile_name,
|
|
uinfo->value.enumerated.item);
|
|
if (err != 0)
|
|
return -EINVAL;
|
|
|
|
strlcpy(uinfo->value.enumerated.name,
|
|
profile_name, MAX_CONTROL_NAME);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_info_device_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_get_device_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
ucontrol->value.integer.value[tfa->dev_idx] = tfa->set_active;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_device_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
enum tfa_error err;
|
|
int dev;
|
|
int request;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
dev = tfa->dev_idx;
|
|
request = ucontrol->value.integer.value[dev];
|
|
|
|
pr_info("%s: [%d] set active %d\n",
|
|
__func__, dev, request);
|
|
tfa->set_active = request; /* store for the next sessions */
|
|
|
|
/* exit if stream is not ready for immediate action */
|
|
if (tfa98xx->pstream == 0
|
|
&& tfa98xx->samstream == 0) {
|
|
pr_info("%s: [%d] store set active unless p/samstream is on\n",
|
|
__func__, dev);
|
|
continue;
|
|
}
|
|
|
|
switch (request) {
|
|
case 0: /* deactivate immediately */
|
|
if (tfa->pause_state == 1) {
|
|
pr_info("%s: [%d] already paused; no need to deactivate\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
|
|
pr_info("%s: [%d] deactivate channel\n",
|
|
__func__, dev);
|
|
cancel_delayed_work_sync(&tfa98xx->monitor_work);
|
|
_tfa98xx_stop(tfa98xx);
|
|
break;
|
|
case 1: /* activate immediately */
|
|
if (tfa->pause_state == 0) {
|
|
pr_info("%s: [%d] already resumed; no need to activate\n",
|
|
__func__, dev);
|
|
tfa_set_status_flag(tfa, TFA_SET_DEVICE, 1);
|
|
break;
|
|
}
|
|
|
|
pr_info("%s: [%d] activate channel\n",
|
|
__func__, dev);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
pr_info("%s: trigger [dev %d - prof %d]\n", __func__,
|
|
dev, tfa98xx->profile);
|
|
tfa_set_active_handle(tfa98xx->tfa, tfa98xx->profile);
|
|
err = tfa98xx_tfa_start(tfa98xx,
|
|
tfa98xx->profile, tfa98xx->vstep);
|
|
if (err) {
|
|
pr_info("error in activation: %d\n", err);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
break;
|
|
}
|
|
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_DONE;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
|
|
if (tfa->spkgain != -1) {
|
|
pr_info("%s: set speaker gain 0x%x\n",
|
|
__func__, tfa->spkgain);
|
|
TFA7x_SET_BF(tfa, TDMSPKG,
|
|
tfa->spkgain);
|
|
}
|
|
|
|
pr_info("%s: UNMUTE dev %d\n",
|
|
__func__, dev);
|
|
tfa_dev_set_state(tfa, TFA_STATE_UNMUTE, 0);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
break;
|
|
default:
|
|
pr_info("%s: [%d] wrong request\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* reset counter */
|
|
tfa = tfa98xx_get_tfa_device_from_index(0);
|
|
tfa_set_status_flag(tfa, TFA_SET_DEVICE, -1);
|
|
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tfa98xx_info_stop_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_get_stop_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
ucontrol->value.integer.value[tfa98xx->tfa->dev_idx] = 0;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_stop_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
int ready = 0;
|
|
int i = tfa98xx->tfa->dev_idx;
|
|
|
|
pr_debug("%d: %ld\n", i, ucontrol->value.integer.value[i]);
|
|
|
|
tfa98xx_dsp_system_stable(tfa98xx->tfa, &ready);
|
|
|
|
if ((ucontrol->value.integer.value[i] != 0) && ready) {
|
|
cancel_delayed_work_sync(&tfa98xx->monitor_work);
|
|
_tfa98xx_stop(tfa98xx);
|
|
}
|
|
|
|
ucontrol->value.integer.value[i] = 0;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tfa98xx_info_mute_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_get_mute_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
ucontrol->value.integer.value[tfa->dev_idx] = tfa->mute_state;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_mute_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
int dev;
|
|
int request;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
dev = tfa->dev_idx;
|
|
request = ucontrol->value.integer.value[dev];
|
|
|
|
/* exit if stream is not ready for initialization */
|
|
if (tfa98xx->pstream == 0
|
|
&& tfa98xx->samstream == 0) {
|
|
pr_info("%s: [%d] only store request (%s), unless p/samstream is on\n",
|
|
__func__, dev,
|
|
(request == 1) ? "mute" : "unmute");
|
|
tfa->mute_state = request;
|
|
continue;
|
|
}
|
|
|
|
switch (request) {
|
|
case 0: /* unmute */
|
|
if (tfa->mute_state == 0) {
|
|
pr_info("%s: [%d] already unmuted, skip the request\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
|
|
pr_info("%s: [%d] unmute channel\n",
|
|
__func__, dev);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa->mute_state = 0;
|
|
tfa_run_unmute(tfa);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
break;
|
|
case 1: /* mute */
|
|
if (tfa->mute_state == 1) {
|
|
pr_info("%s: [%d] already muted, skip the request\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
|
|
pr_info("%s: [%d] mute channel\n",
|
|
__func__, dev);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa->mute_state = 1;
|
|
tfa_run_mute(tfa);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
break;
|
|
default:
|
|
pr_info("%s: [%d] wrong request\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tfa98xx_info_pause_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_get_pause_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
ucontrol->value.integer.value[tfa->dev_idx] = tfa->pause_state;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_pause_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
enum tfa_error err;
|
|
int dev;
|
|
int request;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
dev = tfa->dev_idx;
|
|
request = ucontrol->value.integer.value[dev];
|
|
|
|
switch (request) {
|
|
case 0: /* resume */
|
|
if (tfa->pause_state == 0) {
|
|
pr_info("%s: [%d] already resumed, skip the request\n",
|
|
__func__, dev);
|
|
tfa_set_status_flag(tfa, TFA_SET_DEVICE, 1);
|
|
break;
|
|
}
|
|
/* exit if stream is not ready for initialization */
|
|
if (tfa98xx->pstream == 0
|
|
&& tfa98xx->samstream == 0) {
|
|
pr_info("%s: [%d] cannot resume unless p/samstream is on\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
|
|
pr_info("%s: [%d] resume channel\n",
|
|
__func__, dev);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
pr_info("%s: trigger [dev %d - prof %d]\n", __func__,
|
|
dev, tfa98xx->profile);
|
|
tfa_set_active_handle(tfa98xx->tfa, tfa98xx->profile);
|
|
err = tfa98xx_tfa_start(tfa98xx,
|
|
tfa98xx->profile, tfa98xx->vstep);
|
|
if (err) {
|
|
pr_info("error in activation: %d\n", err);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
break;
|
|
}
|
|
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_DONE;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
|
|
if (tfa->spkgain != -1) {
|
|
pr_info("%s: set speaker gain 0x%x\n",
|
|
__func__, tfa->spkgain);
|
|
TFA7x_SET_BF(tfa, TDMSPKG,
|
|
tfa->spkgain);
|
|
}
|
|
|
|
pr_info("%s: UNMUTE dev %d\n",
|
|
__func__, dev);
|
|
tfa_dev_set_state(tfa, TFA_STATE_UNMUTE, 0);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
tfa->pause_state = 0;
|
|
break;
|
|
case 1: /* pause */
|
|
if (tfa->pause_state == 1) {
|
|
pr_info("%s: [%d] already paused, skip the request\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
|
|
pr_info("%s: [%d] pause channel\n",
|
|
__func__, dev);
|
|
cancel_delayed_work_sync(&tfa98xx->monitor_work);
|
|
_tfa98xx_stop(tfa98xx);
|
|
|
|
tfa->pause_state = 1;
|
|
break;
|
|
default:
|
|
pr_info("%s: [%d] wrong request\n",
|
|
__func__, dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* reset counter */
|
|
tfa = tfa98xx_get_tfa_device_from_index(0);
|
|
tfa_set_status_flag(tfa, TFA_SET_DEVICE, -1);
|
|
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tfa98xx_info_spkgain(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.integer.min = 0x0;
|
|
uinfo->value.integer.max = 0xf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_get_spkgain(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
int spkgain;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
spkgain = tfa->spkgain;
|
|
if (spkgain == -1) {
|
|
spkgain = TFA7x_GET_BF(tfa, TDMSPKG);
|
|
pr_info("%s: [%d] read current speaker gain 0x%x\n",
|
|
__func__, tfa->dev_idx, spkgain);
|
|
}
|
|
|
|
ucontrol->value.integer.value[tfa->dev_idx] = spkgain;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_spkgain(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *tfa = NULL;
|
|
enum tfa98xx_error err;
|
|
int dev;
|
|
int cur_spkgain;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
dev = tfa->dev_idx;
|
|
tfa->spkgain = ucontrol->value.integer.value[dev];
|
|
|
|
cur_spkgain = TFA7x_GET_BF(tfa, TDMSPKG);
|
|
pr_info("%s: [%d] set spekaer gain 0x%x (currently, 0x%x)\n",
|
|
__func__, dev, tfa->spkgain, cur_spkgain);
|
|
err = TFA7x_SET_BF(tfa, TDMSPKG, tfa->spkgain);
|
|
if (err)
|
|
pr_err("%s: [%d] failed to set speaker gain\n",
|
|
__func__, dev);
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tfa98xx_info_cal_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
mutex_lock(&tfa98xx_mutex);
|
|
uinfo->count = tfa98xx_device_count;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 0xffff; /* 16 bit value */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_cal_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
enum tfa_error err;
|
|
int i = tfa98xx->tfa->dev_idx;
|
|
|
|
tfa98xx->cal_data = (uint16_t)ucontrol->value.integer.value[i];
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
err = tfa98xx_write_re25(tfa98xx->tfa, tfa98xx->cal_data);
|
|
tfa98xx->set_mtp_cal = (err != tfa_error_ok);
|
|
if (tfa98xx->set_mtp_cal == false)
|
|
pr_info("Calibration value (%d) set in mtp\n",
|
|
tfa98xx->cal_data);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tfa98xx_get_cal_ctl(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
ucontrol->value.integer.value[tfa98xx->tfa->dev_idx]
|
|
= tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_RE25_PRIM);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_create_controls(struct tfa98xx *tfa98xx)
|
|
{
|
|
int prof, nprof, mix_index = 0;
|
|
int nr_controls = 0, id = 0;
|
|
char *name;
|
|
struct tfa98xx_baseprofile *bprofile;
|
|
struct device *cdev;
|
|
int ret;
|
|
static int is_control_created;
|
|
|
|
if (is_control_created) {
|
|
pr_info("%s: Already created\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
cdev = tfa98xx->component->dev;
|
|
|
|
/* Create the following controls:
|
|
* - enum control to select the active profile
|
|
* - one volume control for each profile hosting a vstep
|
|
* - Stop control on TFA1 devices
|
|
*/
|
|
|
|
nr_controls = 2; /* Profile and stop control */
|
|
|
|
nr_controls += 1; /* set active */
|
|
nr_controls += 1; /* set mute */
|
|
nr_controls += 1; /* set pause */
|
|
nr_controls += 1; /* set speaker gain */
|
|
|
|
if (tfa98xx->flags & TFA98XX_FLAG_CALIBRATION_CTL)
|
|
nr_controls += 1; /* calibration */
|
|
|
|
/* allocate the tfa98xx_controls base on the nr of profiles */
|
|
nprof = tfa_cnt_get_dev_nprof(tfa98xx->tfa);
|
|
for (prof = 0; prof < nprof; prof++) {
|
|
if (tfa_cont_get_max_vstep(tfa98xx->tfa, prof))
|
|
nr_controls++; /* Playback Volume control */
|
|
}
|
|
|
|
tfa98xx_controls = devm_kzalloc(cdev,
|
|
nr_controls * sizeof(tfa98xx_controls[0]), GFP_KERNEL);
|
|
if (!tfa98xx_controls)
|
|
return -ENOMEM;
|
|
|
|
/* Create a mixer item for selecting the active profile */
|
|
name = devm_kzalloc(cdev, MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME, "%s Profile", tfa98xx->fw.name);
|
|
pr_info("%s: Mixer Control Name = %s\n", __func__, name);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info = tfa98xx_info_profile;
|
|
tfa98xx_controls[mix_index].get = tfa98xx_get_profile;
|
|
tfa98xx_controls[mix_index].put = tfa98xx_set_profile;
|
|
/* tfa98xx_controls[mix_index].private_value = profs; */
|
|
/* save number of profiles */
|
|
mix_index++;
|
|
|
|
/* create mixer items for each profile that has volume */
|
|
for (prof = 0; prof < nprof; prof++) {
|
|
/* create an new empty profile */
|
|
bprofile = devm_kzalloc(cdev,
|
|
sizeof(*bprofile), GFP_KERNEL);
|
|
if (!bprofile)
|
|
return -ENOMEM;
|
|
|
|
bprofile->len = 0;
|
|
bprofile->item_id = -1;
|
|
INIT_LIST_HEAD(&bprofile->list);
|
|
|
|
/* copy profile name into basename until the . */
|
|
get_profile_basename(bprofile->basename,
|
|
_tfa_cont_profile_name(tfa98xx, prof));
|
|
bprofile->len = strlen(bprofile->basename);
|
|
|
|
/*
|
|
* search the profile list for a profile with basename,
|
|
* if it is not found then
|
|
* add it to the list and add a new mixer control (with vsteps)
|
|
* also, if it is a calibration profile,
|
|
* do not add it to the list
|
|
*/
|
|
if ((is_profile_in_list(bprofile->basename, bprofile->len) == 0)
|
|
&& is_calibration_profile
|
|
(_tfa_cont_profile_name(tfa98xx, prof)) == 0) {
|
|
/* the profile is not present, add it to the list */
|
|
list_add(&bprofile->list, &profile_list);
|
|
bprofile->item_id = id++;
|
|
|
|
pr_debug("profile added [%d]: %s\n",
|
|
bprofile->item_id, bprofile->basename);
|
|
|
|
if (tfa_cont_get_max_vstep(tfa98xx->tfa, prof)) {
|
|
name = devm_kzalloc(cdev,
|
|
MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME,
|
|
"%s %s Playback Volume",
|
|
tfa98xx->fw.name, bprofile->basename);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface
|
|
= SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info
|
|
= tfa98xx_info_vstep;
|
|
tfa98xx_controls[mix_index].get
|
|
= tfa98xx_get_vstep;
|
|
tfa98xx_controls[mix_index].put
|
|
= tfa98xx_set_vstep;
|
|
tfa98xx_controls[mix_index].private_value
|
|
= bprofile->item_id;
|
|
/* save profile index */
|
|
mix_index++;
|
|
}
|
|
}
|
|
|
|
/* look for the basename profile in the list of mixer profiles
|
|
* and add the container profile index
|
|
* to the supported samplerates of this mixer profile
|
|
*/
|
|
add_sr_to_profile(tfa98xx, bprofile->basename,
|
|
bprofile->len, prof);
|
|
}
|
|
|
|
/* set the number of user selectable profiles in the mixer */
|
|
if (id > 0) /* if any profile to be registered */
|
|
tfa98xx_mixer_profiles = id;
|
|
else if (tfa98xx_mixer_profiles == 0)
|
|
tfa98xx_mixer_profiles = nprof;
|
|
|
|
/* set active device for the following sessions */
|
|
name = devm_kzalloc(cdev, MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME, "%s Active", tfa98xx->fw.name);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info = tfa98xx_info_device_ctl;
|
|
tfa98xx_controls[mix_index].get = tfa98xx_get_device_ctl;
|
|
tfa98xx_controls[mix_index].put = tfa98xx_set_device_ctl;
|
|
mix_index++;
|
|
|
|
/* Create a mixer item for stop control on TFA1 */
|
|
name = devm_kzalloc(cdev, MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME, "%s Stop", tfa98xx->fw.name);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info = tfa98xx_info_stop_ctl;
|
|
tfa98xx_controls[mix_index].get = tfa98xx_get_stop_ctl;
|
|
tfa98xx_controls[mix_index].put = tfa98xx_set_stop_ctl;
|
|
mix_index++;
|
|
|
|
/* set mute / unmute by force */
|
|
name = devm_kzalloc(cdev, MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME, "%s Mute", tfa98xx->fw.name);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info = tfa98xx_info_mute_ctl;
|
|
tfa98xx_controls[mix_index].get = tfa98xx_get_mute_ctl;
|
|
tfa98xx_controls[mix_index].put = tfa98xx_set_mute_ctl;
|
|
mix_index++;
|
|
|
|
/* set pause / resume by force */
|
|
name = devm_kzalloc(cdev, MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME, "%s Pause", tfa98xx->fw.name);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info = tfa98xx_info_pause_ctl;
|
|
tfa98xx_controls[mix_index].get = tfa98xx_get_pause_ctl;
|
|
tfa98xx_controls[mix_index].put = tfa98xx_set_pause_ctl;
|
|
mix_index++;
|
|
|
|
/* set speaker gain by force */
|
|
name = devm_kzalloc(cdev, MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME, "%s Gain", tfa98xx->fw.name);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info = tfa98xx_info_spkgain;
|
|
tfa98xx_controls[mix_index].get = tfa98xx_get_spkgain;
|
|
tfa98xx_controls[mix_index].put = tfa98xx_set_spkgain;
|
|
mix_index++;
|
|
|
|
if (tfa98xx->flags & TFA98XX_FLAG_CALIBRATION_CTL) {
|
|
name = devm_kzalloc(cdev,
|
|
MAX_CONTROL_NAME, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
scnprintf(name, MAX_CONTROL_NAME,
|
|
"%s Calibration", tfa98xx->fw.name);
|
|
tfa98xx_controls[mix_index].name = name;
|
|
tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
tfa98xx_controls[mix_index].info = tfa98xx_info_cal_ctl;
|
|
tfa98xx_controls[mix_index].get = tfa98xx_get_cal_ctl;
|
|
tfa98xx_controls[mix_index].put = tfa98xx_set_cal_ctl;
|
|
mix_index++;
|
|
}
|
|
|
|
ret = snd_soc_add_component_controls(tfa98xx->component,
|
|
tfa98xx_controls, mix_index);
|
|
|
|
if (!ret)
|
|
is_control_created = 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void *tfa98xx_devm_kstrdup(struct device *dev, char *buf)
|
|
{
|
|
char *str = devm_kzalloc(dev, strlen(buf) + 1, GFP_KERNEL);
|
|
|
|
if (!str)
|
|
return str;
|
|
memcpy(str, buf, strlen(buf));
|
|
|
|
return str;
|
|
}
|
|
|
|
static int tfa98xx_append_i2c_address(struct device *dev,
|
|
struct i2c_client *i2c,
|
|
struct snd_soc_dapm_widget *widgets,
|
|
int num_widgets,
|
|
struct snd_soc_dai_driver *dai_drv,
|
|
int num_dai)
|
|
{
|
|
char buf[50], name[50] = {0};
|
|
int i;
|
|
int i2cbus = i2c->adapter->nr;
|
|
int addr = i2c->addr;
|
|
|
|
if (dai_drv && num_dai > 0)
|
|
for (i = 0; i < num_dai; i++) {
|
|
memcpy(name, dai_drv[i].name,
|
|
strlen(dai_drv[i].name));
|
|
snprintf(buf, 50, "%s-%d-%x", name, i2cbus, addr);
|
|
dai_drv[i].name = tfa98xx_devm_kstrdup(dev, buf);
|
|
pr_info("dai_drv[%d].name=%s\n", i, dai_drv[i].name);
|
|
|
|
memcpy(name, dai_drv[i].playback.stream_name,
|
|
strlen(dai_drv[i].playback.stream_name));
|
|
snprintf(buf, 50, "%s-%d-%x", name, i2cbus, addr);
|
|
dai_drv[i].playback.stream_name
|
|
= tfa98xx_devm_kstrdup(dev, buf);
|
|
pr_info("dai_drv[%d].playback.stream_name=%s\n",
|
|
i, dai_drv[i].playback.stream_name);
|
|
|
|
memcpy(name, dai_drv[i].capture.stream_name,
|
|
strlen(dai_drv[i].capture.stream_name));
|
|
snprintf(buf, 50, "%s-%d-%x", name, i2cbus, addr);
|
|
dai_drv[i].capture.stream_name
|
|
= tfa98xx_devm_kstrdup(dev, buf);
|
|
pr_info("dai_drv[%d].capture.stream_name=%s\n",
|
|
i, dai_drv[i].capture.stream_name);
|
|
}
|
|
|
|
/* the idea behind this is convert:
|
|
* SND_SOC_DAPM_AIF_IN
|
|
* ("AIF IN","AIF Playback",0,SND_SOC_NOPM,0,0),
|
|
* into:
|
|
* SND_SOC_DAPM_AIF_IN
|
|
* ("AIF IN","AIF Playback-2-36",0,SND_SOC_NOPM,0,0),
|
|
*/
|
|
if (widgets && num_widgets > 0)
|
|
for (i = 0; i < num_widgets; i++) {
|
|
if (!widgets[i].sname)
|
|
continue;
|
|
if ((widgets[i].id == snd_soc_dapm_aif_in)
|
|
|| (widgets[i].id == snd_soc_dapm_aif_out)) {
|
|
memcpy(name, widgets[i].sname,
|
|
strlen(widgets[i].sname));
|
|
snprintf(buf, 50, "%s-%d-%x",
|
|
name, i2cbus, addr);
|
|
widgets[i].sname
|
|
= tfa98xx_devm_kstrdup(dev, buf);
|
|
pr_info("widgets[%d].sname=%s\n",
|
|
i, widgets[i].sname);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dapm_widget tfa98xx_dapm_widgets_common[] = {
|
|
/* Stream widgets */
|
|
SND_SOC_DAPM_AIF_IN("AIF IN", "AIF Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIF OUT", "AIF Capture", 0, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_OUTPUT("OUTL"),
|
|
SND_SOC_DAPM_INPUT("AEC Loopback"),
|
|
};
|
|
|
|
static struct snd_soc_dapm_widget tfa98xx_dapm_widgets_stereo[] = {
|
|
SND_SOC_DAPM_OUTPUT("OUTR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route tfa98xx_dapm_routes_common[] = {
|
|
{"OUTL", NULL, "AIF IN"},
|
|
{"AIF OUT", NULL, "AEC Loopback"},
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route tfa98xx_dapm_routes_stereo[] = {
|
|
{"OUTR", NULL, "AIF IN"},
|
|
};
|
|
|
|
static void tfa98xx_add_widgets(struct tfa98xx *tfa98xx)
|
|
{
|
|
struct snd_soc_dapm_context *dapm
|
|
= snd_soc_component_get_dapm(tfa98xx->component);
|
|
unsigned int num_dapm_widgets
|
|
= ARRAY_SIZE(tfa98xx_dapm_widgets_common);
|
|
struct snd_soc_dapm_widget *widgets;
|
|
|
|
widgets = devm_kzalloc(tfa98xx->dev,
|
|
sizeof(struct snd_soc_dapm_widget)
|
|
* ARRAY_SIZE(tfa98xx_dapm_widgets_common),
|
|
GFP_KERNEL);
|
|
if (!widgets)
|
|
return;
|
|
memcpy(widgets, tfa98xx_dapm_widgets_common,
|
|
sizeof(struct snd_soc_dapm_widget)
|
|
* ARRAY_SIZE(tfa98xx_dapm_widgets_common));
|
|
|
|
tfa98xx_append_i2c_address(tfa98xx->dev,
|
|
tfa98xx->i2c,
|
|
widgets,
|
|
num_dapm_widgets,
|
|
NULL,
|
|
0);
|
|
|
|
snd_soc_dapm_new_controls(dapm, widgets,
|
|
ARRAY_SIZE(tfa98xx_dapm_widgets_common));
|
|
snd_soc_dapm_add_routes(dapm, tfa98xx_dapm_routes_common,
|
|
ARRAY_SIZE(tfa98xx_dapm_routes_common));
|
|
|
|
snd_soc_dapm_ignore_suspend(dapm, "AIF IN");
|
|
snd_soc_dapm_ignore_suspend(dapm, "OUTL");
|
|
snd_soc_dapm_ignore_suspend(dapm, "AIF OUT");
|
|
snd_soc_dapm_ignore_suspend(dapm, "AEC Loopback");
|
|
|
|
if (tfa98xx->flags & TFA98XX_FLAG_STEREO_DEVICE) {
|
|
snd_soc_dapm_new_controls
|
|
(dapm, tfa98xx_dapm_widgets_stereo,
|
|
ARRAY_SIZE(tfa98xx_dapm_widgets_stereo));
|
|
snd_soc_dapm_add_routes
|
|
(dapm, tfa98xx_dapm_routes_stereo,
|
|
ARRAY_SIZE(tfa98xx_dapm_routes_stereo));
|
|
|
|
snd_soc_dapm_ignore_suspend(dapm, "OUTR");
|
|
}
|
|
}
|
|
|
|
/* I2C wrapper functions */
|
|
enum tfa98xx_error tfa98xx_write_register16(struct tfa_device *tfa,
|
|
unsigned char subaddress,
|
|
unsigned short value)
|
|
{
|
|
enum tfa98xx_error error = TFA98XX_ERROR_OK;
|
|
struct tfa98xx *tfa98xx;
|
|
int ret;
|
|
int retries = I2C_RETRIES;
|
|
|
|
if (tfa == NULL) {
|
|
pr_err("No device available\n");
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
if (!tfa98xx || !tfa98xx->regmap) {
|
|
pr_err("No tfa98xx regmap available\n");
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
}
|
|
|
|
retry:
|
|
ret = regmap_write(tfa98xx->regmap, subaddress, value);
|
|
if (ret < 0) {
|
|
pr_warn("i2c error, retries left: %d\n", retries);
|
|
if (retries) {
|
|
retries--;
|
|
msleep(I2C_RETRY_DELAY);
|
|
goto retry;
|
|
}
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
if (tfa98xx_kmsg_regs)
|
|
dev_dbg(tfa98xx->dev,
|
|
"WR reg=0x%02x, val=0x%04x %s\n",
|
|
subaddress, value,
|
|
ret < 0 ? "Error!!" : "");
|
|
|
|
if (tfa98xx_ftrace_regs)
|
|
tfa98xx_trace_printk
|
|
("WR reg=0x%02x, val=0x%04x %s\n",
|
|
subaddress, value,
|
|
ret < 0 ? "Error!!" : "");
|
|
|
|
return error;
|
|
}
|
|
|
|
enum tfa98xx_error tfa98xx_read_register16(struct tfa_device *tfa,
|
|
unsigned char subaddress,
|
|
unsigned short *val)
|
|
{
|
|
enum tfa98xx_error error = TFA98XX_ERROR_OK;
|
|
struct tfa98xx *tfa98xx;
|
|
unsigned int value;
|
|
int retries = I2C_RETRIES;
|
|
int ret;
|
|
|
|
if (tfa == NULL) {
|
|
pr_err("No device available\n");
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
if (!tfa98xx || !tfa98xx->regmap) {
|
|
pr_err("No tfa98xx regmap available\n");
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
}
|
|
|
|
retry:
|
|
ret = regmap_read(tfa98xx->regmap, subaddress, &value);
|
|
if (ret < 0) {
|
|
pr_warn("i2c error at subaddress 0x%x, retries left: %d\n",
|
|
subaddress, retries);
|
|
if (retries) {
|
|
retries--;
|
|
msleep(I2C_RETRY_DELAY);
|
|
goto retry;
|
|
}
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
*val = value & 0xffff;
|
|
|
|
if (tfa98xx_kmsg_regs)
|
|
dev_dbg(tfa98xx->dev,
|
|
"RD reg=0x%02x, val=0x%04x %s\n",
|
|
subaddress, *val,
|
|
ret < 0 ? "Error!!" : "");
|
|
if (tfa98xx_ftrace_regs)
|
|
tfa98xx_trace_printk
|
|
("RD reg=0x%02x, val=0x%04x %s\n",
|
|
subaddress, *val,
|
|
ret < 0 ? "Error!!" : "");
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* init external dsp
|
|
*/
|
|
enum tfa98xx_error tfa98xx_init_dsp(struct tfa_device *tfa)
|
|
{
|
|
return TFA98XX_ERROR_NOT_SUPPORTED;
|
|
}
|
|
|
|
int tfa98xx_get_dsp_status(struct tfa_device *tfa)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* write external dsp message
|
|
*/
|
|
int tfa98xx_write_dsp(void *tfa,
|
|
int num_bytes, const char *command_buffer)
|
|
{
|
|
return TFA98XX_ERROR_NOT_SUPPORTED;
|
|
}
|
|
|
|
/*
|
|
* read external dsp message
|
|
*/
|
|
int tfa98xx_read_dsp(void *tfa,
|
|
int num_bytes, unsigned char *result_buffer)
|
|
{
|
|
return TFA98XX_ERROR_NOT_SUPPORTED;
|
|
}
|
|
/*
|
|
* write/read external dsp message
|
|
*/
|
|
int tfa98xx_writeread_dsp(void *tfa,
|
|
int command_length, void *command_buffer,
|
|
int result_length, void *result_buffer)
|
|
{
|
|
return TFA98XX_ERROR_NOT_SUPPORTED;
|
|
}
|
|
|
|
enum tfa98xx_error tfa98xx_read_data(struct tfa_device *tfa,
|
|
unsigned char reg,
|
|
int len, unsigned char value[])
|
|
{
|
|
enum tfa98xx_error error = TFA98XX_ERROR_OK;
|
|
struct tfa98xx *tfa98xx;
|
|
struct i2c_client *tfa98xx_client;
|
|
int err;
|
|
int tries = 0;
|
|
unsigned char *reg_buf = NULL;
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = NULL,
|
|
}, {
|
|
.flags = I2C_M_RD,
|
|
.len = len,
|
|
.buf = value,
|
|
},
|
|
};
|
|
|
|
reg_buf = (unsigned char *)
|
|
kmalloc(sizeof(reg), GFP_DMA); /* GRP_KERNEL also works */
|
|
if (!reg_buf)
|
|
return -ENOMEM;
|
|
|
|
*reg_buf = reg;
|
|
msgs[0].buf = reg_buf;
|
|
|
|
if (tfa == NULL) {
|
|
pr_err("No device available\n");
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
if (tfa98xx->i2c) {
|
|
tfa98xx_client = tfa98xx->i2c;
|
|
msgs[0].addr = tfa98xx_client->addr;
|
|
msgs[1].addr = tfa98xx_client->addr;
|
|
|
|
do {
|
|
err = i2c_transfer(tfa98xx_client->adapter, msgs,
|
|
ARRAY_SIZE(msgs));
|
|
if (err != ARRAY_SIZE(msgs))
|
|
msleep_interruptible(I2C_RETRY_DELAY);
|
|
} while ((err != ARRAY_SIZE(msgs)) && (++tries < I2C_RETRIES));
|
|
|
|
if (err != ARRAY_SIZE(msgs)) {
|
|
dev_err(&tfa98xx_client->dev,
|
|
"read transfer error %d\n", err);
|
|
error = TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
if (tfa98xx_kmsg_regs)
|
|
dev_dbg(&tfa98xx_client->dev,
|
|
"RD-DAT reg=0x%02x, len=%d\n",
|
|
reg, len);
|
|
if (tfa98xx_ftrace_regs)
|
|
tfa98xx_trace_printk
|
|
("RD-DAT reg=0x%02x, len=%d\n",
|
|
reg, len);
|
|
} else {
|
|
pr_err("No device available\n");
|
|
error = TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
kfree(reg_buf);
|
|
|
|
return error;
|
|
}
|
|
|
|
enum tfa98xx_error tfa98xx_write_raw(struct tfa_device *tfa,
|
|
int len,
|
|
const unsigned char data[])
|
|
{
|
|
enum tfa98xx_error error = TFA98XX_ERROR_OK;
|
|
struct tfa98xx *tfa98xx;
|
|
int ret;
|
|
int retries = I2C_RETRIES;
|
|
|
|
if (tfa == NULL) {
|
|
pr_err("No device available\n");
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
|
|
retry:
|
|
ret = i2c_master_send(tfa98xx->i2c, data, len);
|
|
if (ret < 0) {
|
|
pr_warn("i2c error, retries left: %d\n", retries);
|
|
if (retries) {
|
|
retries--;
|
|
msleep(I2C_RETRY_DELAY);
|
|
goto retry;
|
|
}
|
|
}
|
|
|
|
if (ret == len) {
|
|
if (tfa98xx_kmsg_regs)
|
|
dev_dbg(tfa98xx->dev,
|
|
"WR-RAW len=%d\n", len);
|
|
if (tfa98xx_ftrace_regs)
|
|
tfa98xx_trace_printk
|
|
("WR-RAW len=%d\n", len);
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
pr_err("WR-RAW (len=%d) Error I2C send size mismatch %d\n",
|
|
len, ret);
|
|
error = TFA98XX_ERROR_FAIL;
|
|
|
|
return error;
|
|
}
|
|
|
|
int tfa_ext_register(dsp_send_message_t tfa_send_message,
|
|
dsp_read_message_t tfa_read_message,
|
|
tfa_event_handler_t *tfa_event_handler)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
int dirt = 0;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa98xx->tfa->ext_dsp = 1;
|
|
tfa98xx->tfa->is_probus_device = 1;
|
|
tfa98xx->tfa->is_cold = 1;
|
|
|
|
if (tfa_send_message != NULL) {
|
|
dirt |= 0x1;
|
|
tfa98xx->tfa->dev_ops.dsp_msg = tfa_send_message;
|
|
}
|
|
if (tfa_read_message != NULL) {
|
|
dirt |= 0x2;
|
|
tfa98xx->tfa->dev_ops.dsp_msg_read = tfa_read_message;
|
|
}
|
|
}
|
|
|
|
if (tfa_event_handler != NULL)
|
|
tfa_event_handler
|
|
= (tfa_event_handler_t *)tfa_ext_event_handler;
|
|
|
|
if (dirt == 0x3)
|
|
tfa_set_ipc_loaded(1);
|
|
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ipi_tfadsp_write(void *tfa, int length, const char *buf)
|
|
{
|
|
enum tfa98xx_error err = TFA98XX_ERROR_OK;
|
|
int ret = 0;
|
|
|
|
if (buf == NULL) {
|
|
pr_err("%s: error with NULL buffer\n", __func__);
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
}
|
|
|
|
if (length >= 3)
|
|
pr_debug("%s: [0]:0x%02x-[1]:0x%02x-[2]:0x%02x, length:%d\n",
|
|
__func__, buf[0], buf[1], buf[2], length);
|
|
|
|
ret = mtk_spk_send_ipi_buf_to_dsp((void *)buf, (uint32_t)length);
|
|
if (ret != 0) {
|
|
pr_err("%s: error in sending message to DSP (err %d)\n",
|
|
__func__, ret);
|
|
err = TFA98XX_ERROR_DSP_NOT_RUNNING;
|
|
}
|
|
|
|
return (int)err;
|
|
}
|
|
|
|
int ipi_tfadsp_read(void *tfa, int length, unsigned char *bytes)
|
|
{
|
|
enum tfa98xx_error err = TFA98XX_ERROR_OK;
|
|
int ret = 0;
|
|
uint32_t buf_len;
|
|
|
|
if (bytes == NULL) {
|
|
pr_err("%s: error with NULL buffer\n", __func__);
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
}
|
|
|
|
ret = mtk_spk_recv_ipi_buf_from_dsp((int8_t *)bytes,
|
|
(int16_t)length, &buf_len);
|
|
if (ret != 0) {
|
|
pr_err("%s: error in receiving message to DSP (err %d)\n",
|
|
__func__, ret);
|
|
err = TFA98XX_ERROR_DSP_NOT_RUNNING;
|
|
}
|
|
|
|
if (length >= 3)
|
|
pr_debug("%s: [0]:0x%02x-[1]:0x%02x-[2]:0x%02x, length:%d, buf_len:%d\n",
|
|
__func__, bytes[0], bytes[1], bytes[2],
|
|
length, buf_len);
|
|
|
|
return (int)err;
|
|
}
|
|
|
|
int tfa_set_blackbox(int enable)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list)
|
|
tfa98xx->tfa->blackbox_enable = enable;
|
|
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Interrupts management */
|
|
static void tfa98xx_interrupt_enable_tfa2(struct tfa98xx *tfa98xx, bool enable)
|
|
{
|
|
tfa98xx->istatus = 0;
|
|
|
|
/* clear all the events before enabling */
|
|
tfa_irq_clear(tfa98xx->tfa, tfa98xx->tfa->irq_all);
|
|
|
|
tfa_irq_ena(tfa98xx->tfa, tfa9878_irq_stotds, enable);
|
|
tfa_irq_ena(tfa98xx->tfa, tfa9878_irq_stocpr, enable);
|
|
tfa_irq_ena(tfa98xx->tfa, tfa9878_irq_stuvds, enable);
|
|
tfa_irq_ena(tfa98xx->tfa, tfa9878_irq_stmanalarm, enable);
|
|
}
|
|
|
|
/* global enable / disable interrupts */
|
|
static void tfa98xx_interrupt_enable(struct tfa98xx *tfa98xx, bool enable)
|
|
{
|
|
if (tfa98xx->flags & TFA98XX_FLAG_SKIP_INTERRUPTS)
|
|
return;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 2)
|
|
tfa98xx_interrupt_enable_tfa2(tfa98xx, enable);
|
|
}
|
|
|
|
/* Firmware management */
|
|
static void tfa98xx_container_loaded
|
|
(const struct firmware *cont, void *context)
|
|
{
|
|
struct tfa_container *container;
|
|
struct tfa98xx *tfa98xx = context;
|
|
enum tfa_error tfa_err;
|
|
int container_size;
|
|
int ret;
|
|
unsigned int value;
|
|
|
|
mutex_lock(&probe_lock);
|
|
|
|
if (tfa98xx->dsp_fw_state == TFA98XX_DSP_FW_OK) {
|
|
pr_info("%s: Already loaded\n", __func__);
|
|
mutex_unlock(&probe_lock);
|
|
return;
|
|
}
|
|
|
|
tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_FAIL;
|
|
|
|
if (!cont) {
|
|
pr_err("Failed to read %s\n", fw_name);
|
|
mutex_unlock(&probe_lock);
|
|
return;
|
|
}
|
|
|
|
pr_debug("loaded %s - size: %zu\n", fw_name, cont->size);
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
if (tfa98xx_container == NULL) {
|
|
container = kzalloc(cont->size, GFP_KERNEL);
|
|
if (container == NULL) {
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
release_firmware(cont);
|
|
pr_err("Error allocating memory\n");
|
|
mutex_unlock(&probe_lock);
|
|
return;
|
|
}
|
|
|
|
container_size = cont->size;
|
|
memcpy(container, cont->data, container_size);
|
|
release_firmware(cont);
|
|
|
|
pr_debug("%.2s%.2s\n", container->version,
|
|
container->subversion);
|
|
pr_debug("%.8s\n", container->customer);
|
|
pr_debug("%.8s\n", container->application);
|
|
pr_debug("%.8s\n", container->type);
|
|
pr_debug("%d ndev\n", container->ndev);
|
|
pr_debug("%d nprof\n", container->nprof);
|
|
|
|
tfa_err = tfa_load_cnt(container, container_size);
|
|
if (tfa_err != tfa_error_ok) {
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
kfree(container);
|
|
dev_err(tfa98xx->dev, "Cannot load container file, aborting\n");
|
|
mutex_unlock(&probe_lock);
|
|
return;
|
|
}
|
|
|
|
tfa98xx_container = container;
|
|
} else {
|
|
pr_debug("container file already loaded...\n");
|
|
container = tfa98xx_container;
|
|
release_firmware(cont);
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
tfa98xx->tfa->cnt = container;
|
|
|
|
/*
|
|
* i2c transaction limited to 64k
|
|
* (Documentation/i2c/writing-clients)
|
|
*/
|
|
tfa98xx->tfa->buffer_size = 65536;
|
|
|
|
/* DSP messages via i2c */
|
|
tfa98xx->tfa->has_msg = 0;
|
|
|
|
if (tfa_dev_probe(tfa98xx->i2c->addr, tfa98xx->tfa) != 0) {
|
|
dev_err(tfa98xx->dev,
|
|
"Failed to probe TFA98xx @ 0x%.2x\n",
|
|
tfa98xx->i2c->addr);
|
|
mutex_unlock(&probe_lock);
|
|
return;
|
|
}
|
|
|
|
/* TEMPORARY, until TFA device is probed before tfa_ext is called */
|
|
if (tfa98xx->tfa->is_probus_device) {
|
|
tfa98xx->tfa->dev_ops.dsp_msg
|
|
= (dsp_send_message_t)ipi_tfadsp_write;
|
|
tfa98xx->tfa->dev_ops.dsp_msg_read
|
|
= (dsp_read_message_t)ipi_tfadsp_read;
|
|
tfa_set_ipc_loaded(1);
|
|
} else {
|
|
/* DSP solution: non-probus */
|
|
tfa98xx->tfa->dev_ops.dsp_msg
|
|
= (dsp_send_message_t)tfa_dsp_msg_rpc;
|
|
tfa98xx->tfa->dev_ops.dsp_msg_read
|
|
= (dsp_read_message_t)tfa_dsp_msg_read_rpc;
|
|
tfa_set_ipc_loaded(1);
|
|
}
|
|
|
|
/* Enable debug traces */
|
|
tfa98xx->tfa->verbose = trace_level & 1;
|
|
|
|
/* prefix is the application name from the cnt */
|
|
tfa_cont_get_app_name(tfa98xx->tfa, tfa98xx->fw.name);
|
|
|
|
/* set default profile/vstep */
|
|
tfa98xx->profile = 0;
|
|
tfa98xx->vstep = 0;
|
|
|
|
/* Override default profile if requested */
|
|
if (strcmp(dflt_prof_name, "")) {
|
|
unsigned int i;
|
|
int nprof = tfa_cnt_get_dev_nprof(tfa98xx->tfa);
|
|
|
|
for (i = 0; i < nprof; i++) {
|
|
if (strcmp(_tfa_cont_profile_name(tfa98xx, i),
|
|
dflt_prof_name) == 0) {
|
|
tfa98xx->profile = i;
|
|
dev_info(tfa98xx->dev,
|
|
"changing default profile to %s (%d)\n",
|
|
dflt_prof_name, tfa98xx->profile);
|
|
break;
|
|
}
|
|
}
|
|
if (i >= nprof)
|
|
dev_info(tfa98xx->dev,
|
|
"Default profile override failed (%s profile not found)\n",
|
|
dflt_prof_name);
|
|
}
|
|
|
|
tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_OK;
|
|
|
|
value = snd_soc_component_read32(tfa98xx->component,
|
|
TFA98XX_KEY2_PROTECTED_MTP0);
|
|
if (value != -1) {
|
|
tfa98xx->calibrate_done =
|
|
(value & TFA98XX_KEY2_PROTECTED_MTP0_MTPEX_MSK) ? 1 : 0;
|
|
pr_info("[0x%x] calibrate_done = MTPEX (%d) 0x%04x\n",
|
|
tfa98xx->i2c->addr, tfa98xx->calibrate_done, value);
|
|
} else {
|
|
pr_info("[0x%x] error in reading MTPEX\n", tfa98xx->i2c->addr);
|
|
tfa98xx->calibrate_done = 0;
|
|
}
|
|
|
|
pr_debug("Firmware init complete\n");
|
|
|
|
/* allocate buffer_pool */
|
|
if (tfa98xx->tfa->dev_idx == 0) {
|
|
int index = 0;
|
|
|
|
pr_info("Allocate buffer_pool\n");
|
|
for (index = 0; index < POOL_MAX_INDEX; index++)
|
|
tfa_buffer_pool(tfa98xx->tfa, index,
|
|
buf_pool_size[index], POOL_ALLOC);
|
|
}
|
|
|
|
if (no_start != 0) {
|
|
mutex_unlock(&probe_lock);
|
|
return;
|
|
}
|
|
|
|
/* Only controls for main device */
|
|
/* for the first device */
|
|
if (tfa98xx->tfa->dev_idx == 0)
|
|
tfa98xx_create_controls(tfa98xx);
|
|
|
|
if (tfa_is_cold(tfa98xx->tfa) == 0) {
|
|
pr_debug("Warning: device 0x%.2x is still warm\n",
|
|
tfa98xx->i2c->addr);
|
|
tfa_reset(tfa98xx->tfa);
|
|
}
|
|
|
|
/* Preload settings using internal clock on TFA2 */
|
|
if (tfa98xx->tfa->tfa_family == 2) {
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa98xx_set_stream_state(tfa98xx->tfa, 0);
|
|
ret = tfa98xx_tfa_start(tfa98xx,
|
|
tfa98xx->profile, tfa98xx->vstep);
|
|
if (ret == TFA98XX_ERROR_NOT_SUPPORTED) {
|
|
tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_FAIL;
|
|
} else {
|
|
/* reset cold amp state */
|
|
if (tfa98xx->tfa->tfa_family == 2)
|
|
TFA_SET_BF(tfa98xx->tfa, MANSCONF, 1);
|
|
}
|
|
tfa_set_status_flag(tfa98xx->tfa, TFA_SET_DEVICE, 0);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
tfa98xx_interrupt_enable(tfa98xx, true);
|
|
|
|
mutex_unlock(&probe_lock);
|
|
}
|
|
|
|
static int tfa98xx_load_container(struct tfa98xx *tfa98xx)
|
|
{
|
|
int tries = 0, ret;
|
|
|
|
mutex_lock(&probe_lock);
|
|
tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_PENDING;
|
|
mutex_unlock(&probe_lock);
|
|
|
|
do {
|
|
ret = request_firmware_nowait(THIS_MODULE,
|
|
FW_ACTION_HOTPLUG,
|
|
fw_name, tfa98xx->dev, GFP_KERNEL,
|
|
tfa98xx, tfa98xx_container_loaded);
|
|
if (!ret) {
|
|
/* expecting sysfs fallback mechanism */
|
|
pr_info("%s: dsp_fw_state %d (if done, %d)\n",
|
|
__func__, tfa98xx->dsp_fw_state,
|
|
TFA98XX_DSP_FW_OK);
|
|
return ret;
|
|
}
|
|
/* wait until driver completes loading */
|
|
msleep_interruptible(20);
|
|
if (tfa98xx->dsp_fw_state == TFA98XX_DSP_FW_OK)
|
|
break;
|
|
|
|
msleep_interruptible(80);
|
|
tries++;
|
|
} while (tries < TFA98XX_LOADFW_NTRIES
|
|
&& tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tfa98xx_monitor(struct work_struct *work)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
enum tfa98xx_error error = TFA98XX_ERROR_OK;
|
|
int handle = -1, is_active = 0;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
mutex_lock(&probe_lock);
|
|
|
|
tfa98xx = container_of(work, struct tfa98xx, monitor_work.work);
|
|
|
|
pr_info("%s: [%d] - profile = %d: %s\n", __func__,
|
|
tfa98xx->tfa->dev_idx, tfa98xx->profile,
|
|
_tfa_cont_profile_name(tfa98xx, tfa98xx->profile));
|
|
|
|
if (tfa98xx->tfa->active_count == -1)
|
|
tfa_set_active_handle(tfa98xx->tfa, tfa98xx->profile);
|
|
|
|
is_active = tfa_is_active_device(tfa98xx->tfa);
|
|
if (is_active) {
|
|
handle = tfa98xx->tfa->dev_idx;
|
|
pr_info("%s: profile = %d, active handle [%s]: %d\n",
|
|
__func__, tfa98xx->profile,
|
|
tfa_cont_device_name(tfa98xx->tfa->cnt, handle),
|
|
tfa98xx->tfa->active_handle);
|
|
} else {
|
|
goto tfa_monitor_exit;
|
|
}
|
|
|
|
/* Check for tap-detection - bypass monitor if it is active */
|
|
if (tfa98xx->input)
|
|
goto tfa_monitor_exit;
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
error = tfa7x_status(tfa98xx->tfa);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (error == TFA98XX_ERROR_DSP_NOT_RUNNING) {
|
|
if (tfa98xx->dsp_init == TFA98XX_DSP_INIT_DONE) {
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_RECOVER;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
pr_info("%s: dsp_init (direct) with device %d, profile %d\n",
|
|
__func__,
|
|
tfa98xx->tfa->dev_idx,
|
|
tfa98xx->profile);
|
|
tfa98xx_dsp_init(tfa98xx);
|
|
}
|
|
}
|
|
|
|
/* for debugging */
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_SYS_CONTROL0, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] SYS_CONTROL0: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_SYS_CONTROL1, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] SYS_CONTROL1: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_SYS_CONTROL2, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] SYS_CONTROL2: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_CLOCK_CONTROL, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] CLOCK_CONTROL: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_STATUS_FLAGS0, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] STATUS_FLAG0: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_STATUS_FLAGS1, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] STATUS_FLAG1: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_STATUS_FLAGS3, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] STATUS_FLAG3: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_STATUS_FLAGS4, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] STATUS_FLAG4: 0x%04x\n", handle, val);
|
|
ret = regmap_read(tfa98xx->regmap, TFA98XX_TDM_CONFIG0, &val);
|
|
if (!ret)
|
|
pr_debug("[%d] TDM_CONFIG0: 0x%04x\n", handle, val);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
tfa_monitor_exit:
|
|
pr_info("%s: exit\n", __func__);
|
|
|
|
mutex_unlock(&probe_lock);
|
|
|
|
if (!tfa98xx->tfa->verbose)
|
|
return;
|
|
|
|
if (tfa98xx_monitor_count != -1)
|
|
if (++tfa98xx_monitor_count > MONITOR_COUNT_MAX)
|
|
return;
|
|
|
|
/* reschedule */
|
|
queue_delayed_work(tfa98xx->tfa98xx_wq,
|
|
&tfa98xx->monitor_work, 5 * HZ);
|
|
}
|
|
|
|
static void tfa98xx_dsp_init(struct tfa98xx *tfa98xx)
|
|
{
|
|
int ret;
|
|
static bool failed;
|
|
bool reschedule = false;
|
|
bool sync = false;
|
|
bool do_sync;
|
|
int active_device_count = tfa98xx_device_count;
|
|
|
|
if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK) {
|
|
pr_debug("Skipping tfa_dev_start (no FW: %d)\n",
|
|
tfa98xx->dsp_fw_state);
|
|
return;
|
|
}
|
|
|
|
if (tfa98xx->dsp_init == TFA98XX_DSP_INIT_DONE) {
|
|
pr_debug("Stream already started, skipping DSP power-on\n");
|
|
return;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
pr_info("%s: ...\n", __func__);
|
|
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_PENDING;
|
|
|
|
/* directly try to start DSP */
|
|
ret = tfa98xx_tfa_start(tfa98xx,
|
|
tfa98xx->profile, tfa98xx->vstep);
|
|
if (ret == TFA98XX_ERROR_NOT_SUPPORTED) {
|
|
tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_FAIL;
|
|
dev_err(tfa98xx->dev, "Failed in starting device\n");
|
|
failed = true;
|
|
} else if (ret != TFA98XX_ERROR_OK) {
|
|
dev_err(tfa98xx->dev,
|
|
"Failed in starting device (err %d; count %d)\n",
|
|
ret, tfa98xx->init_count);
|
|
failed = true;
|
|
sync = true; /* unmute by force, even if it fails */
|
|
tfa98xx->init_count = 0;
|
|
} else {
|
|
sync = true;
|
|
failed = false;
|
|
|
|
/* Subsystem ready, tfa init complete */
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_DONE;
|
|
dev_dbg(tfa98xx->dev,
|
|
"tfa_dev_start succeeded! (%d)\n",
|
|
tfa98xx->init_count);
|
|
tfa98xx->init_count = 0;
|
|
}
|
|
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (reschedule) {
|
|
struct tfa98xx *ntfa98xx;
|
|
|
|
failed = false;
|
|
|
|
/* reschedule this init work for later */
|
|
list_for_each_entry(ntfa98xx, &tfa98xx_device_list, list) {
|
|
ntfa98xx->init_count++;
|
|
pr_info("%s: dsp_init (direct) with device %d, profile %d\n",
|
|
__func__,
|
|
ntfa98xx->tfa->dev_idx,
|
|
ntfa98xx->profile);
|
|
tfa98xx_dsp_init(ntfa98xx);
|
|
}
|
|
}
|
|
|
|
if (!sync)
|
|
return;
|
|
|
|
if (tfa98xx->tfa->active_count == -1)
|
|
tfa_set_active_handle(tfa98xx->tfa, tfa98xx->profile);
|
|
|
|
/* check if all devices have started */
|
|
mutex_lock(&tfa98xx_mutex);
|
|
active_device_count = tfa98xx->tfa->active_count;
|
|
if (tfa98xx_sync_count < active_device_count)
|
|
tfa98xx_sync_count++;
|
|
|
|
do_sync = (tfa98xx_sync_count >= active_device_count);
|
|
|
|
/* when all devices have started then unmute */
|
|
if (do_sync) {
|
|
tfa98xx_sync_count = 0;
|
|
|
|
list_for_each_entry(tfa98xx,
|
|
&tfa98xx_device_list, list) {
|
|
struct tfa_device *ntfa = tfa98xx->tfa;
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
if (failed)
|
|
tfa98xx->dsp_init
|
|
= TFA98XX_DSP_INIT_FAIL;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (!tfa_is_active_device(ntfa))
|
|
continue;
|
|
|
|
pr_info("%s: profile = %d, active handle [%s]: %d\n",
|
|
__func__, tfa98xx->profile,
|
|
tfa_cont_device_name(ntfa->cnt,
|
|
ntfa->dev_idx),
|
|
ntfa->active_handle);
|
|
|
|
if (failed) {
|
|
tfa_handle_damaged_speakers(ntfa);
|
|
continue;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
if (ntfa->spkgain != -1) {
|
|
pr_info("%s: set speaker gain 0x%x\n",
|
|
__func__, ntfa->spkgain);
|
|
TFA7x_SET_BF(ntfa, TDMSPKG,
|
|
ntfa->spkgain);
|
|
}
|
|
pr_info("%s: UNMUTE dev %d\n",
|
|
__func__, ntfa->dev_idx);
|
|
tfa_dev_set_state(ntfa,
|
|
TFA_STATE_UNMUTE, 0);
|
|
|
|
/*
|
|
* start monitor thread to check IC status bit
|
|
* periodically, and re-init IC to recover if
|
|
* needed.
|
|
*/
|
|
tfa98xx_monitor_count = 0;
|
|
queue_delayed_work(tfa98xx->tfa98xx_wq,
|
|
&tfa98xx->monitor_work,
|
|
1 * HZ);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
failed = false;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
}
|
|
|
|
static void tfa98xx_set_irq_status(struct tfa98xx *tfa98xx,
|
|
int bit, int value, int flag)
|
|
{
|
|
int mask = 1 << (bit & 0x0f);
|
|
|
|
tfa98xx->istatus &= ~mask;
|
|
tfa98xx->istatus |= (flag & 0x1) << (bit & 0x0f);
|
|
|
|
/* value: 0 (active high) / 1 (active low) */
|
|
tfa_irq_set_pol(tfa98xx->tfa, bit, (value == 0) ? 1 : 0);
|
|
tfa_irq_clear(tfa98xx->tfa, bit);
|
|
|
|
pr_info("%s: status 0x%04x on dev %d\n", __func__,
|
|
tfa98xx->istatus, tfa98xx->tfa->dev_idx);
|
|
}
|
|
|
|
static void tfa98xx_interrupt(struct work_struct *work)
|
|
{
|
|
struct tfa98xx *tfa98xx0
|
|
= container_of(work, struct tfa98xx, interrupt_work.work);
|
|
struct tfa98xx *tfa98xx;
|
|
int irq_gpio = tfa98xx0->irq_gpio;
|
|
int value = 0;
|
|
|
|
pr_info("%s: triggered\n", __func__);
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
if (irq_gpio != tfa98xx->irq_gpio)
|
|
continue;
|
|
|
|
pr_info("%s: status check on dev %d\n", __func__,
|
|
tfa98xx->tfa->dev_idx);
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
if (tfa_irq_get(tfa98xx->tfa, tfa9878_irq_stotds)) {
|
|
/* clear at read */
|
|
value = TFA7x_GET_BF(tfa98xx->tfa, OTDS);
|
|
pr_err("%s: OTP is %s!\n", __func__,
|
|
(value == 0) ? "detected" : "restored");
|
|
tfa98xx_set_irq_status(tfa98xx, tfa9878_irq_stotds,
|
|
0, (value == 0) ? 1 : 0);
|
|
}
|
|
if (tfa_irq_get(tfa98xx->tfa, tfa9878_irq_stocpr)) {
|
|
/* clear at read */
|
|
value = TFA7x_GET_BF(tfa98xx->tfa, OCDS);
|
|
pr_err("%s: OCP is %s!\n", __func__,
|
|
(value == 1) ? "detected" : "restored");
|
|
tfa98xx_set_irq_status(tfa98xx, tfa9878_irq_stocpr,
|
|
0, (value == 1) ? 1 : 0);
|
|
}
|
|
if (tfa_irq_get(tfa98xx->tfa, tfa9878_irq_stuvds)) {
|
|
/* clear at read */
|
|
value = TFA7x_GET_BF(tfa98xx->tfa, UVDS);
|
|
pr_err("%s: UVP is %s!\n", __func__,
|
|
(value == 0) ? "detected" : "restored");
|
|
tfa98xx_set_irq_status(tfa98xx, tfa9878_irq_stuvds,
|
|
0, (value == 0) ? 1 : 0);
|
|
}
|
|
if (tfa_irq_get(tfa98xx->tfa, tfa9878_irq_stmanalarm)) {
|
|
/* clear at read */
|
|
value = TFA7x_GET_BF(tfa98xx->tfa, MANALARM);
|
|
pr_err("%s: Alarm state is %s!\n", __func__,
|
|
(value == 1) ? "detected" : "restored");
|
|
tfa98xx_set_irq_status(tfa98xx, tfa9878_irq_stmanalarm,
|
|
0, (value == 1) ? 1 : 0);
|
|
}
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
}
|
|
|
|
/* unmask interrupts masked in IRQ handler */
|
|
tfa_irq_unmask(tfa98xx0->tfa);
|
|
}
|
|
|
|
static int tfa98xx_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct tfa98xx *tfa98xx = snd_soc_component_get_drvdata(component);
|
|
int idx = 0;
|
|
int i = 0;
|
|
u64 formats;
|
|
int err;
|
|
struct device *cdev;
|
|
|
|
cdev = component->dev;
|
|
|
|
/*
|
|
* Support CODEC to CODEC links,
|
|
* these are called with a NULL runtime pointer.
|
|
*/
|
|
if (!substream->runtime)
|
|
return 0;
|
|
|
|
if (pcm_no_constraint != 0)
|
|
return 0;
|
|
|
|
switch (pcm_sample_format) {
|
|
case 0:
|
|
formats = SNDRV_PCM_FMTBIT_S16_LE;
|
|
break;
|
|
case 1:
|
|
formats = SNDRV_PCM_FMTBIT_S24_LE;
|
|
break;
|
|
case 2:
|
|
formats = SNDRV_PCM_FMTBIT_S32_LE;
|
|
break;
|
|
default:
|
|
formats = TFA98XX_FORMATS;
|
|
break;
|
|
}
|
|
|
|
err = snd_pcm_hw_constraint_mask64(substream->runtime,
|
|
SNDRV_PCM_HW_PARAM_FORMAT, formats);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (no_start != 0)
|
|
return 0;
|
|
|
|
if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK) {
|
|
dev_info(cdev, "Container file not loaded\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
tfa98xx->rate_constraint.list = &tfa98xx->rate_constraint_list[0];
|
|
tfa98xx->rate_constraint.count = 0;
|
|
|
|
pr_info("%s: add all the supported rates: 0x%04x\n",
|
|
__func__, TFA98XX_RATES);
|
|
for (i = 0; i < (int)ARRAY_SIZE(index_to_rate); i++) {
|
|
if ((1 << i) & TFA98XX_RATES) {
|
|
tfa98xx->rate_constraint_list[idx++] = index_to_rate[i];
|
|
tfa98xx->rate_constraint.count += 1;
|
|
}
|
|
}
|
|
|
|
pr_info("%s: setting rate constraint (%d)\n", __func__, idx);
|
|
|
|
return snd_pcm_hw_constraint_list(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
&tfa98xx->rate_constraint);
|
|
}
|
|
|
|
static int tfa98xx_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct tfa98xx *tfa98xx
|
|
= snd_soc_component_get_drvdata(codec_dai->component);
|
|
|
|
tfa98xx->sysclk = freq;
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
|
|
unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
pr_debug("\n");
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct tfa98xx *tfa98xx
|
|
= snd_soc_component_get_drvdata(dai->component);
|
|
struct snd_soc_component *component = dai->component;
|
|
struct device *cdev;
|
|
|
|
cdev = component->dev;
|
|
|
|
pr_debug("fmt=0x%x\n", fmt);
|
|
|
|
/* Supported mode: I2S, PDM */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
if ((fmt & SND_SOC_DAIFMT_MASTER_MASK)
|
|
!= SND_SOC_DAIFMT_CBS_CFS) {
|
|
dev_err(cdev, "Invalid Codec main mode\n");
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case SND_SOC_DAIFMT_PDM:
|
|
break;
|
|
default:
|
|
dev_err(cdev, "Unsupported DAI format %d\n",
|
|
fmt & SND_SOC_DAIFMT_FORMAT_MASK);
|
|
return -EINVAL;
|
|
}
|
|
|
|
tfa98xx->audio_mode = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tfa98xx_get_fssel(unsigned int rate)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < (int)ARRAY_SIZE(rate_to_fssel); i++)
|
|
if (rate_to_fssel[i].rate == rate)
|
|
return rate_to_fssel[i].fssel;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int tfa98xx_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct tfa98xx *tfa98xx
|
|
= snd_soc_component_get_drvdata(component);
|
|
unsigned int rate;
|
|
int prof_idx;
|
|
int sample_size;
|
|
int slot_size;
|
|
|
|
/* Supported */
|
|
rate = params_rate(params);
|
|
sample_size = snd_pcm_format_width(params_format(params));
|
|
slot_size = snd_pcm_format_physical_width(params_format(params));
|
|
pr_info("%s: requested rate: %d, sample size: %d, physical size: %d\n",
|
|
__func__, rate, sample_size, slot_size);
|
|
|
|
if (no_start != 0)
|
|
return 0;
|
|
|
|
pr_info("%s: forced to change rate: %d to %d\n",
|
|
__func__, rate, sr_converted);
|
|
rate = sr_converted;
|
|
|
|
/* check if samplerate is supported for this mixer profile */
|
|
prof_idx = get_profile_id_for_sr(tfa98xx_mixer_profile, rate);
|
|
if (prof_idx < 0) {
|
|
pr_err("tfa98xx: invalid sample rate %d.\n", rate);
|
|
return -EINVAL;
|
|
}
|
|
pr_debug("mixer profile:container profile = [%d:%d]\n",
|
|
tfa98xx_mixer_profile, prof_idx);
|
|
|
|
/* update 'real' profile (container profile) */
|
|
tfa98xx->profile = prof_idx;
|
|
|
|
pr_info("%s: tfa98xx_profile %d\n", __func__, tfa98xx->profile);
|
|
|
|
/* update to new rate */
|
|
tfa98xx->rate = rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_mute(struct snd_soc_dai *dai, int mute, int stream)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct tfa98xx *tfa98xx
|
|
= snd_soc_component_get_drvdata(component);
|
|
|
|
dev_dbg(tfa98xx->dev, "%s: state: %d (stream = %d)\n",
|
|
__func__, mute, stream);
|
|
|
|
if (no_start) {
|
|
pr_debug("no_start parameter set no tfa_dev_start or tfa_dev_stop, returning\n");
|
|
return 0;
|
|
}
|
|
|
|
_tfa98xx_mute(tfa98xx, mute, stream);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _tfa98xx_mute(struct tfa98xx *tfa98xx, int mute, int stream)
|
|
{
|
|
if (mute) {
|
|
/* stop DSP only when both playback and capture streams
|
|
* are deactivated
|
|
*/
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (tfa98xx->pstream == 0) {
|
|
pr_debug("mute:%d [pstream duplicated]\n",
|
|
mute);
|
|
return 0;
|
|
}
|
|
tfa98xx->pstream = 0;
|
|
} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
|
|
if (tfa98xx->cstream == 0) {
|
|
pr_debug("mute:%d [cstream duplicated]\n",
|
|
mute);
|
|
return 0;
|
|
}
|
|
tfa98xx->cstream = 0;
|
|
}
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
pr_info("mute:%d [pstream %d, cstream %d, samstream %d]\n",
|
|
mute,
|
|
tfa98xx->pstream, tfa98xx->cstream, tfa98xx->samstream);
|
|
|
|
if ((tfa98xx_count_active_stream(BIT_PSTREAM)
|
|
== tfa98xx_device_count)
|
|
&& (tfa98xx_count_active_stream(BIT_CSTREAM)
|
|
== tfa98xx_device_count)) /* at first mute of either */
|
|
if (tfa98xx->tfa->blackbox_enable
|
|
&& !tfa98xx->tfa->unset_log) {
|
|
/* get logging once
|
|
* before shutting down pstream
|
|
*/
|
|
pr_info("%s: get blackbox logging\n", __func__);
|
|
tfa_update_log();
|
|
}
|
|
tfa98xx->tfa->unset_log = 0;
|
|
|
|
tfa98xx_set_stream_state(tfa98xx->tfa,
|
|
(tfa98xx->pstream & BIT_PSTREAM)
|
|
|((tfa98xx->cstream<<1) & BIT_CSTREAM)
|
|
|((tfa98xx->samstream<<2) & BIT_SAMSTREAM));
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
/* case: both p/cstream (either) and samstream are off
|
|
* if (!(tfa98xx->pstream == 0 || tfa98xx->cstream == 0)
|
|
* || (tfa98xx->samstream != 0)) {
|
|
* pr_info("mute is suspended until playback/saam are off\n");
|
|
* return 0;
|
|
* }
|
|
*/
|
|
/* wait until both main streams (pstream / samstream) are off */
|
|
if ((tfa98xx->pstream == 0)
|
|
&& (tfa98xx->samstream == 0)) {
|
|
pr_info("mute is triggered\n");
|
|
} else {
|
|
pr_info("mute is suspended when only cstream is off\n");
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
tfa98xx_sync_count = 0;
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
cancel_delayed_work_sync(&tfa98xx->monitor_work);
|
|
_tfa98xx_stop(tfa98xx);
|
|
} else {
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
tfa98xx->pstream = 1;
|
|
else if (stream == SNDRV_PCM_STREAM_CAPTURE)
|
|
tfa98xx->cstream = 1;
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
pr_info("mute:%d [pstream %d, cstream %d, samstream %d]\n",
|
|
mute,
|
|
tfa98xx->pstream, tfa98xx->cstream, tfa98xx->samstream);
|
|
tfa98xx_set_stream_state(tfa98xx->tfa,
|
|
(tfa98xx->pstream & BIT_PSTREAM)
|
|
|((tfa98xx->cstream<<1) & BIT_CSTREAM)
|
|
|((tfa98xx->samstream<<2) & BIT_SAMSTREAM));
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (tfa98xx->tfa->set_active == 0) {
|
|
pr_info("%s: skip unmuting device %d, if it's forced to set inactive\n",
|
|
__func__, tfa98xx->tfa->dev_idx);
|
|
tfa98xx->tfa->unset_log = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* case: either p/cstream (both) or samstream is on
|
|
* if ((tfa98xx->pstream != 0 && tfa98xx->cstream != 0)
|
|
* || tfa98xx->samstream != 0) {
|
|
*/
|
|
/* wait until DSP is ready for initialization */
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK
|
|
|| stream == SNDRV_PCM_STREAM_SAAM) {
|
|
pr_info("unmute is triggered\n");
|
|
} else {
|
|
pr_info("unmute is suspended when only cstream is on\n");
|
|
return 0;
|
|
}
|
|
|
|
pr_debug("%s: unmute with profile %d\n",
|
|
__func__, tfa98xx->profile);
|
|
|
|
/* check index if it needs dsp init only for main device */
|
|
|
|
/* Start DSP */
|
|
pr_info("%s: start tfa amp\n", __func__);
|
|
pr_info("%s: dsp_init (direct) with device %d, profile %d\n",
|
|
__func__, tfa98xx->tfa->dev_idx, tfa98xx->profile);
|
|
tfa98xx_dsp_init(tfa98xx);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _tfa98xx_stop(struct tfa98xx *tfa98xx)
|
|
{
|
|
if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK)
|
|
return 0;
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa_dev_stop(tfa98xx->tfa);
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_STOPPED;
|
|
tfa98xx_set_dsp_configured(tfa98xx);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops tfa98xx_dai_ops = {
|
|
.startup = tfa98xx_startup,
|
|
.set_fmt = tfa98xx_set_fmt,
|
|
.set_sysclk = tfa98xx_set_dai_sysclk,
|
|
.set_tdm_slot = tfa98xx_set_tdm_slot,
|
|
.hw_params = tfa98xx_hw_params,
|
|
.mute_stream = tfa98xx_mute,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver tfa98xx_dai[] = {
|
|
{
|
|
.name = "tfa98xx-aif",
|
|
.id = 1,
|
|
.playback = {
|
|
.stream_name = "AIF Playback",
|
|
.channels_min = 1,
|
|
.channels_max = MAX_HANDLES,
|
|
.rates = TFA98XX_RATES,
|
|
.formats = TFA98XX_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "AIF Capture",
|
|
.channels_min = 1,
|
|
.channels_max = MAX_HANDLES,
|
|
.rates = TFA98XX_RATES,
|
|
.formats = TFA98XX_FORMATS,
|
|
},
|
|
.ops = &tfa98xx_dai_ops,
|
|
.symmetric_rates = 1,
|
|
.symmetric_channels = 0,
|
|
.symmetric_samplebits = 0,
|
|
},
|
|
};
|
|
|
|
static int tfa98xx_probe(struct snd_soc_component *component)
|
|
{
|
|
struct tfa98xx *tfa98xx = snd_soc_component_get_drvdata(component);
|
|
int ret = 0;
|
|
struct device *cdev;
|
|
|
|
cdev = component->dev;
|
|
|
|
pr_debug("%s:\n", __func__);
|
|
|
|
/* setup work queue, will be used to initial DSP on first boot up */
|
|
tfa98xx->tfa98xx_wq = create_singlethread_workqueue("tfa98xx");
|
|
if (!tfa98xx->tfa98xx_wq)
|
|
return -ENOMEM;
|
|
|
|
tfa98xx->tfa->tfacal_wq = create_singlethread_workqueue("tfacal");
|
|
if (!tfa98xx->tfa->tfacal_wq)
|
|
return -ENOMEM;
|
|
|
|
INIT_DELAYED_WORK(&tfa98xx->monitor_work, tfa98xx_monitor);
|
|
INIT_DELAYED_WORK(&tfa98xx->interrupt_work, tfa98xx_interrupt);
|
|
|
|
tfa98xx->component = component;
|
|
|
|
snd_soc_component_init_regmap(component, tfa98xx->regmap);
|
|
|
|
ret = tfa98xx_load_container(tfa98xx);
|
|
pr_debug("Container loading requested: %d\n", ret);
|
|
|
|
tfa98xx_add_widgets(tfa98xx);
|
|
|
|
dev_info(cdev, "tfa98xx codec registered (%s)",
|
|
tfa98xx->fw.name);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tfa98xx_remove(struct snd_soc_component *component)
|
|
{
|
|
struct tfa98xx *tfa98xx = snd_soc_component_get_drvdata(component);
|
|
|
|
pr_debug("%s:\n", __func__);
|
|
|
|
if (tfa98xx->tfa == NULL)
|
|
return;
|
|
|
|
tfa98xx_interrupt_enable(tfa98xx, false);
|
|
|
|
cancel_delayed_work_sync(&tfa98xx->interrupt_work);
|
|
cancel_delayed_work_sync(&tfa98xx->monitor_work);
|
|
|
|
if (tfa98xx->tfa98xx_wq)
|
|
destroy_workqueue(tfa98xx->tfa98xx_wq);
|
|
|
|
if (tfa98xx->tfa->tfacal_wq)
|
|
destroy_workqueue(tfa98xx->tfa->tfacal_wq);
|
|
|
|
/* deallocate buffer_pool */
|
|
if (tfa98xx->tfa->dev_idx == 0) {
|
|
int index = 0;
|
|
|
|
pr_info("Deallocate buffer_pool\n");
|
|
for (index = 0; index < POOL_MAX_INDEX; index++)
|
|
tfa_buffer_pool(tfa98xx->tfa,
|
|
index, 0, POOL_FREE);
|
|
}
|
|
}
|
|
|
|
static const struct snd_soc_component_driver soc_component_dev_tfa98xx = {
|
|
.probe = tfa98xx_probe,
|
|
.remove = tfa98xx_remove,
|
|
};
|
|
|
|
static bool tfa98xx_writeable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
/* enable read access for all registers */
|
|
return 1;
|
|
}
|
|
|
|
static bool tfa98xx_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
/* enable read access for all registers */
|
|
return 1;
|
|
}
|
|
|
|
static bool tfa98xx_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
/* enable read access for all registers */
|
|
return 1;
|
|
}
|
|
|
|
static const struct regmap_config tfa98xx_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
|
|
.max_register = TFA98XX_MAX_REGISTER,
|
|
.writeable_reg = tfa98xx_writeable_register,
|
|
.readable_reg = tfa98xx_readable_register,
|
|
.volatile_reg = tfa98xx_volatile_register,
|
|
.cache_type = REGCACHE_NONE,
|
|
};
|
|
|
|
static void tfa98xx_irq_tfa2(struct tfa98xx *tfa98xx)
|
|
{
|
|
/*
|
|
* mask interrupts
|
|
* will be unmasked after handling interrupts in workqueue
|
|
*/
|
|
tfa_irq_mask(tfa98xx->tfa);
|
|
queue_delayed_work(tfa98xx->tfa98xx_wq, &tfa98xx->interrupt_work, 0);
|
|
}
|
|
|
|
static irqreturn_t tfa98xx_irq(int irq, void *data)
|
|
{
|
|
struct tfa98xx *tfa98xx = data;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 2)
|
|
tfa98xx_irq_tfa2(tfa98xx);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int tfa98xx_ext_reset(struct tfa98xx *tfa98xx)
|
|
{
|
|
if (tfa98xx && gpio_is_valid(tfa98xx->reset_gpio)) {
|
|
int reset = tfa98xx->reset_polarity;
|
|
|
|
gpio_set_value_cansleep((unsigned int)tfa98xx->reset_gpio,
|
|
reset);
|
|
msleep(TFA_RESET_DELAY);
|
|
gpio_set_value_cansleep((unsigned int)tfa98xx->reset_gpio,
|
|
!reset);
|
|
msleep(TFA_RESET_DELAY);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_parse_dt(struct device *dev,
|
|
struct tfa98xx *tfa98xx, struct device_node *np)
|
|
{
|
|
u32 value;
|
|
int ret;
|
|
|
|
tfa98xx->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
|
|
if (tfa98xx->reset_gpio < 0)
|
|
dev_dbg(dev, "No reset GPIO provided, will not HW reset device\n");
|
|
|
|
tfa98xx->irq_gpio = of_get_named_gpio(np, "irq-gpio", 0);
|
|
if (tfa98xx->irq_gpio < 0)
|
|
dev_dbg(dev, "No IRQ GPIO provided.\n");
|
|
else
|
|
dev_info(dev, "IRQ GPIO: %d\n", tfa98xx->irq_gpio);
|
|
|
|
ret = of_property_read_u32(np, "reset-polarity", &value);
|
|
if (ret < 0) /* when it fails to read from device tree */
|
|
tfa98xx->reset_polarity = LOW; /* RSTN */
|
|
else
|
|
tfa98xx->reset_polarity = (value == 0) ? LOW : HIGH;
|
|
|
|
dev_info(dev, "reset-polarity:%d\n", tfa98xx->reset_polarity);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_parse_limit_cal_dt(struct device *dev,
|
|
struct tfa98xx *tfa98xx, struct device_node *np)
|
|
{
|
|
u32 value;
|
|
int err_lower, err_upper;
|
|
|
|
err_lower = of_property_read_u32(np, "lower-limit-cal", &value);
|
|
if ((err_lower < 0)
|
|
|| (value < MIN_CALIBRATION_DATA))
|
|
tfa98xx->tfa->lower_limit_cal = MIN_CALIBRATION_DATA;
|
|
else
|
|
tfa98xx->tfa->lower_limit_cal = value;
|
|
pr_info("[0x%x] lower limit cal : %d\n",
|
|
tfa98xx->i2c->addr, tfa98xx->tfa->lower_limit_cal);
|
|
|
|
err_upper = of_property_read_u32(np, "upper-limit-cal", &value);
|
|
if ((err_upper < 0)
|
|
|| (value > MAX_CALIBRATION_DATA))
|
|
tfa98xx->tfa->upper_limit_cal = MAX_CALIBRATION_DATA;
|
|
else
|
|
tfa98xx->tfa->upper_limit_cal = value;
|
|
pr_info("[0x%x] upper limit cal : %d\n",
|
|
tfa98xx->i2c->addr, tfa98xx->tfa->upper_limit_cal);
|
|
|
|
return ((err_lower == 0 && err_upper == 0) ? 0 : -1);
|
|
}
|
|
|
|
static int tfa98xx_parse_dummy_cal_dt(struct device *dev,
|
|
struct tfa98xx *tfa98xx, struct device_node *np)
|
|
{
|
|
u32 value;
|
|
int err;
|
|
|
|
err = of_property_read_u32(np, "dummy-cal", &value);
|
|
if (err < 0) {
|
|
tfa98xx->tfa->dummy_cal = DUMMY_CALIBRATION_DATA;
|
|
return TFA_NOT_FOUND;
|
|
}
|
|
|
|
if (value < MIN_CALIBRATION_DATA)
|
|
tfa98xx->tfa->dummy_cal = MIN_CALIBRATION_DATA;
|
|
else if (value > MAX_CALIBRATION_DATA)
|
|
tfa98xx->tfa->dummy_cal = MAX_CALIBRATION_DATA;
|
|
else
|
|
tfa98xx->tfa->dummy_cal = value;
|
|
pr_info("[0x%x] dummy cal : %d\n",
|
|
tfa98xx->i2c->addr, tfa98xx->tfa->dummy_cal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tfa98xx_parse_inchannel_dt(struct device *dev,
|
|
struct tfa98xx *tfa98xx, struct device_node *np)
|
|
{
|
|
u32 value;
|
|
int err;
|
|
|
|
err = of_property_read_u32(np, "inchannel", &value);
|
|
if (err < 0) {
|
|
tfa98xx->tfa->inchannel = -1; /* to use default INDEX_0/1 */
|
|
return TFA_NOT_FOUND;
|
|
}
|
|
|
|
if (value < 0 || value >= MAX_CHANNELS)
|
|
tfa98xx->tfa->inchannel = -1; /* to use default INDEX_0/1 */
|
|
else
|
|
tfa98xx->tfa->inchannel = value;
|
|
pr_info("[0x%x] inchannel : %d\n",
|
|
tfa98xx->i2c->addr, tfa98xx->tfa->inchannel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t tfa98xx_reg_write(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
|
|
if (count != 1) {
|
|
pr_debug("invalid register address");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_info("i2c set reg: 0x%x\n", tfa98xx->reg);
|
|
|
|
tfa98xx->reg = buf[0];
|
|
|
|
return 1;
|
|
}
|
|
|
|
static ssize_t tfa98xx_rw_write(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
size_t write_count = (count > 2) ? 2 : count; /* 16-bit */
|
|
u8 *data;
|
|
int ret = 0;
|
|
int retries = I2C_RETRIES;
|
|
|
|
data = kmalloc(write_count + 1, GFP_KERNEL);
|
|
if (data == NULL) {
|
|
ret = -ENOMEM;
|
|
pr_debug("can not allocate memory\n");
|
|
return ret;
|
|
}
|
|
|
|
data[0] = tfa98xx->reg;
|
|
memcpy(&data[1], buf, write_count);
|
|
|
|
pr_debug("i2c rw write: 0x%x (offset %d, write_count %d, count %d)\n",
|
|
tfa98xx->reg, (int)off, (int)write_count, (int)count);
|
|
retry:
|
|
ret = i2c_master_send(tfa98xx->i2c, data, write_count + 1);
|
|
if (ret < 0) {
|
|
pr_warn("i2c error, retries left: %d\n", retries);
|
|
if (retries) {
|
|
retries--;
|
|
msleep(I2C_RETRY_DELAY);
|
|
goto retry;
|
|
}
|
|
}
|
|
|
|
kfree(data);
|
|
|
|
/* the number of data bytes written without the register address */
|
|
return ((ret > 1) ? count : -EIO);
|
|
}
|
|
|
|
static ssize_t tfa98xx_rw_read(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
size_t read_count = (count > 2) ? 2 : count; /* 16-bit */
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = tfa98xx->i2c->addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = &tfa98xx->reg,
|
|
},
|
|
{
|
|
.addr = tfa98xx->i2c->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = read_count,
|
|
.buf = buf,
|
|
},
|
|
};
|
|
int ret;
|
|
int retries = I2C_RETRIES;
|
|
|
|
if (count >= PAGE_SIZE) {
|
|
pr_info("%s: blocked anonymous read!\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
pr_debug("i2c rw read: 0x%x (offset %d, read_count %d, count %d)\n",
|
|
tfa98xx->reg, (int)off, (int)read_count, (int)count);
|
|
|
|
memset(buf, 0, count);
|
|
retry:
|
|
ret = i2c_transfer(tfa98xx->i2c->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret < 0) {
|
|
pr_warn("i2c error, retries left: %d\n", retries);
|
|
if (retries) {
|
|
retries--;
|
|
msleep(I2C_RETRY_DELAY);
|
|
goto retry;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* ret contains the number of i2c transaction */
|
|
/* return the number of bytes read */
|
|
return ((ret > 1) ? count : 0);
|
|
}
|
|
|
|
static ssize_t tfa98xx_calibrate_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
int mtp = 0, mtpex = 0;
|
|
int count = 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
tfa98xx_check_calibration(tfa98xx);
|
|
|
|
if (tfa98xx->calibrate_done) {
|
|
pr_info("[0x%x] Calibration Success\n", tfa98xx->i2c->addr);
|
|
count = snprintf(buf, PAGE_SIZE, "[0x%02x] Success\n",
|
|
tfa98xx->i2c->addr);
|
|
} else {
|
|
pr_info("[0x%x] Calibration Fail\n", tfa98xx->i2c->addr);
|
|
count = snprintf(buf, PAGE_SIZE, "[0x%02x] Fail\n",
|
|
tfa98xx->i2c->addr);
|
|
}
|
|
|
|
mtp = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_RE25);
|
|
mtpex = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_EX);
|
|
|
|
pr_info("[0x%x] MTPEX: %d, MTP: %d mOhm\n",
|
|
tfa98xx->i2c->addr, mtpex, mtp);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_calibrate_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
static const char ref[] = "1"; /* "please calibrate now" */
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* check string length, and account for eol */
|
|
if (count > sizeof(ref) + 1 || count < (sizeof(ref) - 1))
|
|
return -EINVAL;
|
|
|
|
/* Compare string, excluding the trailing \0 and the potentials eol */
|
|
if (strncmp(buf, ref, sizeof(ref) - 1)) {
|
|
pr_info("[0x%x] %s: calibration is triggered with %s!\n",
|
|
tfa98xx->i2c->addr, __func__, buf);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = tfa98xx_run_calibration(tfa98xx);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_mtpex_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
int count = 0, value;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
value = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_EX);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (value < 0) {
|
|
pr_err("[0x%x] Unable to access MTPEX: %d\n",
|
|
tfa98xx->i2c->addr, value);
|
|
return -EIO;
|
|
}
|
|
|
|
pr_debug("[0x%x] MTPEX : %d\n", tfa98xx->i2c->addr, value);
|
|
count = snprintf(buf, PAGE_SIZE, "[0x%02x] MTPEX %d\n",
|
|
tfa98xx->i2c->addr, value);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_mtpex_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
enum tfa_error err;
|
|
static const char ref[] = "0"; /* "please calibrate now" */
|
|
enum tfa98xx_error ret;
|
|
u16 temp_val = DEFAULT_REF_TEMP;
|
|
int idx, ndev;
|
|
struct tfa_device *ntfa = NULL;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* check string length, and account for eol */
|
|
if (count > sizeof(ref) + 1 || count < (sizeof(ref) - 1))
|
|
return -EINVAL;
|
|
|
|
/* Compare string, excluding the trailing \0 and the potentials eol */
|
|
if (strncmp(buf, ref, sizeof(ref) - 1)) {
|
|
pr_info("[0x%x] Can only clear MTPEX (0 value expected)\n",
|
|
tfa98xx->i2c->addr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* EXT_TEMP */
|
|
ret = tfa98xx_read_reference_temp(&temp_val);
|
|
if (ret)
|
|
pr_err("error in reading reference temp\n");
|
|
|
|
ndev = tfa98xx->tfa->dev_count;
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
ntfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (ntfa == NULL)
|
|
continue;
|
|
tfa98xx_set_exttemp(ntfa, (short)temp_val);
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
err = tfa_dev_mtp_set(tfa98xx->tfa, TFA_MTP_EX, 0);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (err != tfa_error_ok) {
|
|
pr_err("[0x%x] Unable to access MTPEX: err %d (suspended)\n",
|
|
tfa98xx->i2c->addr, err);
|
|
/* suspend until TFA98xx is active */
|
|
tfa98xx->tfa->reset_mtpex = 1;
|
|
return -EIO;
|
|
}
|
|
|
|
pr_info("[0x%x] MTPEX < 0\n", tfa98xx->i2c->addr);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_re25_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
int count = 0, mtpex, value;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
mtpex = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_EX);
|
|
if (mtpex)
|
|
value = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_RE25);
|
|
else
|
|
value = 0;
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (value < 0) {
|
|
pr_err("[0x%x] Unable to access MTP RE25: %d\n",
|
|
tfa98xx->i2c->addr, value);
|
|
return -EIO;
|
|
}
|
|
|
|
pr_debug("[0x%x] MTP : %d\n", tfa98xx->i2c->addr, value);
|
|
count = snprintf(buf, PAGE_SIZE, "[0x%02x] Calibration data %d mOhm\n",
|
|
tfa98xx->i2c->addr, value);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_re25_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
/* to prevent attack to tfa98xx_re25_store */
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_blackbox_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
int count = 0;
|
|
int idx, ndev, offset, addr;
|
|
enum tfa98xx_error err = TFA98XX_ERROR_OK;
|
|
struct tfa_device *tfa0 = NULL;
|
|
struct tfa_device *ntfa = NULL;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
ndev = tfa98xx->tfa->dev_count;
|
|
if (ndev < 1)
|
|
return -EINVAL;
|
|
|
|
/* select main device */
|
|
tfa0 = tfa98xx_get_tfa_device_from_index(0);
|
|
|
|
/* update current session if it's active */
|
|
if (tfa98xx_count_active_stream(BIT_PSTREAM) > 0)
|
|
err = tfa_update_log();
|
|
|
|
pr_info("blackbox state: %d\n",
|
|
tfa0->blackbox_enable);
|
|
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
offset = idx * ID_BLACKBOX_MAX;
|
|
ntfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (ntfa == NULL)
|
|
continue;
|
|
addr = ntfa->resp_address;
|
|
count = snprintf(buf + strlen(buf), PAGE_SIZE,
|
|
"[0x%02x] maxX %d um, maxT %d degC, countXmax %d, countTmax %d, maxX_keep %d um, maxT_keep %d degC\n",
|
|
addr,
|
|
tfa0->log_data[offset + ID_MAXX_LOG],
|
|
tfa0->log_data[offset + ID_MAXT_LOG],
|
|
tfa0->log_data[offset + ID_OVERXMAX_COUNT],
|
|
tfa0->log_data[offset + ID_OVERTMAX_COUNT],
|
|
tfa0->log_data[offset + ID_MAXX_KEEP_LOG],
|
|
tfa0->log_data[offset + ID_MAXT_KEEP_LOG]);
|
|
|
|
/* skip resetting; reset only by registered callback
|
|
* memset(tfa0->log_data + offset,
|
|
* 0, sizeof(int) * TFA_LOG_MAX_COUNT);
|
|
*/
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_blackbox_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
int enable = 0;
|
|
int ret = 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* check string length, and account for eol */
|
|
if (count < 1)
|
|
return -EINVAL;
|
|
|
|
if (!strncmp(buf, "1", 1))
|
|
enable = 1;
|
|
else if (!strncmp(buf, "0", 1))
|
|
enable = 0;
|
|
else {
|
|
pr_info("%s: blackbox is triggered with %s!\n", __func__, buf);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_info("%s: blackbox < %d\n", __func__, enable);
|
|
ret = tfa_set_blackbox(enable);
|
|
|
|
if (tfa98xx->tfa->is_configured > 0) {
|
|
pr_info("%s: set blackbox directly\n", __func__);
|
|
tfa98xx->tfa->individual_msg = 1;
|
|
ret = tfa_configure_log(enable);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_gain_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
int count = 0;
|
|
int spkgain, ampgain;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
spkgain = TFA7x_GET_BF(tfa98xx->tfa, TDMSPKG);
|
|
ampgain = TFA7x_GET_BF(tfa98xx->tfa, AMPGAIN);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
|
|
if (spkgain < 0 || ampgain < 0) {
|
|
pr_err("[0x%x] Unable to access TDMSPKG / AMPGAIN: (%d, %d)\n",
|
|
tfa98xx->i2c->addr, spkgain, ampgain);
|
|
return -EIO;
|
|
}
|
|
|
|
pr_debug("[0x%x] TDMSPKG : %d, AMPGAIN : %d\n",
|
|
tfa98xx->i2c->addr, spkgain, ampgain);
|
|
count = snprintf(buf, PAGE_SIZE, "[0x%02x] TDMSPKG %d, AMAPGAIN %d\n",
|
|
tfa98xx->i2c->addr, spkgain, ampgain);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_gain_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
/* to prevent attack to tfa98xx_re25_store */
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_autocal_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
struct tfa_device *tfa = NULL;
|
|
int count = 0;
|
|
|
|
tfa = tfa98xx->tfa;
|
|
if (!tfa)
|
|
return -ENODEV;
|
|
if (tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
pr_debug("[0x%x] autocal : %s\n",
|
|
tfa98xx->i2c->addr,
|
|
(tfa->disable_auto_cal) ? "disabled" : "enabled");
|
|
count = snprintf(buf, PAGE_SIZE, "%s\n",
|
|
(tfa->disable_auto_cal) ? "0 (disabled)" : "1 (enabled)");
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tfa98xx_autocal_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct tfa98xx *tfa98xx = dev_get_drvdata(dev);
|
|
struct tfa_device *tfa = NULL;
|
|
int enable = 0;
|
|
|
|
if (tfa98xx->tfa->tfa_family == 0) {
|
|
pr_err("[0x%x] %s: system is not initialized: not probed yet!\n",
|
|
tfa98xx->i2c->addr, __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* check string length, and account for eol */
|
|
if (count < 1)
|
|
return -EINVAL;
|
|
|
|
if (!strncmp(buf, "1", 1))
|
|
enable = 1;
|
|
else if (!strncmp(buf, "0", 1))
|
|
enable = 0;
|
|
else {
|
|
pr_info("%s: autocal is triggered with %s!\n", __func__, buf);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_info("%s: autocal < %d\n", __func__, enable);
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
tfa = tfa98xx->tfa;
|
|
if (tfa == NULL)
|
|
continue;
|
|
|
|
tfa->disable_auto_cal = (enable) ? 0 : 1;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static struct bin_attribute dev_attr_rw = {
|
|
.attr = {
|
|
.name = "rw",
|
|
.mode = 0600,
|
|
},
|
|
.size = 0,
|
|
.read = tfa98xx_rw_read,
|
|
.write = tfa98xx_rw_write,
|
|
};
|
|
|
|
static struct bin_attribute dev_attr_reg = {
|
|
.attr = {
|
|
.name = "reg",
|
|
.mode = 0200,
|
|
},
|
|
.size = 0,
|
|
.read = NULL,
|
|
.write = tfa98xx_reg_write,
|
|
};
|
|
|
|
static struct device_attribute dev_attr_calibrate = {
|
|
.attr = {
|
|
.name = "calibrate",
|
|
.mode = 0600,
|
|
},
|
|
.show = tfa98xx_calibrate_show,
|
|
.store = tfa98xx_calibrate_store,
|
|
};
|
|
|
|
static struct device_attribute dev_attr_mtpex = {
|
|
.attr = {
|
|
.name = "MTPEX",
|
|
.mode = 0600,
|
|
},
|
|
.show = tfa98xx_mtpex_show,
|
|
.store = tfa98xx_mtpex_store,
|
|
};
|
|
|
|
static struct device_attribute dev_attr_re25 = {
|
|
.attr = {
|
|
.name = "re25",
|
|
.mode = 0600,
|
|
},
|
|
.show = tfa98xx_re25_show,
|
|
.store = tfa98xx_re25_store,
|
|
};
|
|
|
|
static struct device_attribute dev_attr_blackbox = {
|
|
.attr = {
|
|
.name = "log",
|
|
.mode = 0600,
|
|
},
|
|
.show = tfa98xx_blackbox_show,
|
|
.store = tfa98xx_blackbox_store,
|
|
};
|
|
|
|
static struct device_attribute dev_attr_gain = {
|
|
.attr = {
|
|
.name = "gain",
|
|
.mode = 0600,
|
|
},
|
|
.show = tfa98xx_gain_show,
|
|
.store = tfa98xx_gain_store,
|
|
};
|
|
|
|
static struct device_attribute dev_attr_autocal = {
|
|
.attr = {
|
|
.name = "autocal",
|
|
.mode = 0600,
|
|
},
|
|
.show = tfa98xx_autocal_show,
|
|
.store = tfa98xx_autocal_store,
|
|
};
|
|
|
|
struct tfa_device *tfa98xx_get_tfa_device_from_index(int index)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *ntfa = NULL;
|
|
static struct tfa_device *tfadevset[MAX_HANDLES];
|
|
|
|
if (index < 0 || index >= MAX_HANDLES)
|
|
return NULL;
|
|
|
|
if (tfadevset[index] != NULL)
|
|
return tfadevset[index];
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
if (tfa98xx->tfa->dev_idx == index) {
|
|
ntfa = tfa98xx->tfa;
|
|
tfadevset[index] = ntfa;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ntfa;
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_get_tfa_device_from_index);
|
|
|
|
struct tfa_device *tfa98xx_get_tfa_device_from_channel(int channel)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
struct tfa_device *ntfa = NULL;
|
|
static struct tfa_device *tfachnset[MAX_CHANNELS];
|
|
int nchannel = -1;
|
|
|
|
if (channel < 0 || channel >= MAX_CHANNELS)
|
|
return NULL;
|
|
|
|
if (tfachnset[channel] != NULL)
|
|
return tfachnset[channel];
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
nchannel = tfa98xx_get_cnt_bitfield(tfa98xx->tfa,
|
|
TFA7x_FAM(tfa98xx->tfa, TDMSPKS));
|
|
if (nchannel == channel) {
|
|
ntfa = tfa98xx->tfa;
|
|
tfachnset[channel] = ntfa;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ntfa;
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_get_tfa_device_from_channel);
|
|
|
|
int tfa98xx_count_active_stream(int stream_flag)
|
|
{
|
|
struct tfa98xx *tfa98xx;
|
|
int stream_counter = 0;
|
|
|
|
list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) {
|
|
if (tfa98xx->tfa->stream_state & stream_flag)
|
|
stream_counter++;
|
|
}
|
|
|
|
return stream_counter;
|
|
}
|
|
|
|
enum tfa98xx_error tfa_run_cal(int index, uint16_t *value)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(index);
|
|
struct tfa98xx *tfa98xx;
|
|
int ret = 0;
|
|
int mtpex = 0;
|
|
int tries = 0;
|
|
|
|
if (!tfa)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
|
|
/* check if calibration already runs */
|
|
tfa_wait_until_calibration_done(tfa);
|
|
|
|
ret = tfa98xx_run_calibration(tfa98xx);
|
|
if (ret < 0)
|
|
return TFA98XX_ERROR_FAIL;
|
|
|
|
tfa_wait_until_calibration_done(tfa);
|
|
|
|
if (value == NULL)
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
|
|
while (tries < TFA98XX_API_REWRTIE_MTP_NTRIES) {
|
|
msleep_interruptible(CAL_STATUS_INTERVAL);
|
|
mtpex = tfa_dev_mtp_get(tfa, TFA_MTP_EX);
|
|
if (mtpex != 0) {
|
|
msleep_interruptible(CAL_STATUS_INTERVAL);
|
|
break;
|
|
}
|
|
tries++;
|
|
}
|
|
mtpex = tfa_dev_mtp_get(tfa, TFA_MTP_EX);
|
|
if (mtpex != 1)
|
|
return TFA98XX_ERROR_FAIL;
|
|
|
|
*value = tfa_dev_mtp_get(tfa, TFA_MTP_RE25);
|
|
if ((int)*value < 0) {
|
|
pr_info("%s: calibration data is not valid\n",
|
|
__func__);
|
|
*value = 0xffff;
|
|
tfa->temp = 0xffff;
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
EXPORT_SYMBOL(tfa_run_cal);
|
|
|
|
enum tfa98xx_error tfa_get_cal_data(int index, uint16_t *value)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(index);
|
|
int mtp = 0, mtpex = 0;
|
|
|
|
if (!tfa)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
|
|
mtp = tfa_dev_mtp_get(tfa, TFA_MTP_RE25);
|
|
mtpex = tfa_dev_mtp_get(tfa, TFA_MTP_EX);
|
|
|
|
if (value == NULL)
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
if (mtpex != 1)
|
|
return TFA98XX_ERROR_FAIL;
|
|
|
|
*value = mtp;
|
|
if ((int)*value < 0) {
|
|
pr_info("%s: calibration data is not valid\n",
|
|
__func__);
|
|
*value = 0xffff;
|
|
tfa->temp = 0xffff;
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
EXPORT_SYMBOL(tfa_get_cal_data);
|
|
|
|
enum tfa98xx_error tfa_get_cal_data_channel(int channel, uint16_t *value)
|
|
{
|
|
int index = tfa_get_dev_idx_from_inchannel(channel);
|
|
|
|
if (index < 0 || index >= MAX_HANDLES)
|
|
return TFA98XX_ERROR_FAIL;
|
|
|
|
return tfa_get_cal_data(index, value);
|
|
}
|
|
EXPORT_SYMBOL(tfa_get_cal_data_channel);
|
|
|
|
enum tfa98xx_error tfa_get_cal_temp(int index, uint16_t *value)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(index);
|
|
int mtpex = 0;
|
|
|
|
if (!tfa)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
|
|
mtpex = tfa_dev_mtp_get(tfa, TFA_MTP_EX);
|
|
|
|
if (value == NULL)
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
if (mtpex != 1)
|
|
return TFA98XX_ERROR_FAIL;
|
|
|
|
*value = tfa->temp;
|
|
if (*value == 0xffff) {
|
|
pr_info("%s: calibration temperature is not valid\n",
|
|
__func__);
|
|
*value = tfa98xx_get_exttemp(tfa);
|
|
pr_info("%s: calibration temperature is not valid\n",
|
|
__func__);
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
EXPORT_SYMBOL(tfa_get_cal_temp);
|
|
|
|
enum tfa98xx_error tfa_get_cal_temp_channel(int channel, uint16_t *value)
|
|
{
|
|
int index = tfa_get_dev_idx_from_inchannel(channel);
|
|
|
|
if (index < 0 || index >= MAX_HANDLES)
|
|
return TFA98XX_ERROR_FAIL;
|
|
|
|
return tfa_get_cal_temp(index, value);
|
|
}
|
|
EXPORT_SYMBOL(tfa_get_cal_temp_channel);
|
|
|
|
int tfa98xx_set_blackbox(int enable)
|
|
{
|
|
enum tfa98xx_error ret = TFA98XX_ERROR_OK;
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(0);
|
|
|
|
if (!tfa)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
if (tfa->tfa_family == 0)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
|
|
pr_info("%s: blackbox < %d\n", __func__, enable);
|
|
ret = tfa_set_blackbox(enable);
|
|
|
|
if (tfa->is_configured > 0) {
|
|
pr_info("%s: set blackbox directly\n", __func__);
|
|
tfa->individual_msg = 1;
|
|
ret = tfa_configure_log(enable);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_set_blackbox);
|
|
|
|
int tfa98xx_get_blackbox_data(int dev, int *data)
|
|
{
|
|
enum tfa98xx_error ret = TFA98XX_ERROR_OK;
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(0);
|
|
int ndev = 0;
|
|
int offset;
|
|
|
|
if (!tfa)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
if (tfa->tfa_family == 0)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
|
|
ndev = tfa->dev_count;
|
|
if (ndev < 1)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
if (dev < 0 || dev >= ndev)
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
|
|
pr_info("%s: blackbox state: %d\n",
|
|
__func__, tfa->blackbox_enable);
|
|
if (tfa->blackbox_enable == 0) {
|
|
pr_info("%s: blackbox disabled - no update\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
|
|
/* update current session if it's active */
|
|
if (tfa98xx_count_active_stream(BIT_PSTREAM) > 0
|
|
&& tfa->is_configured > 0) {
|
|
ret = tfa_update_log();
|
|
if (ret != TFA98XX_ERROR_OK)
|
|
pr_info("%s: failure in updating current data\n",
|
|
__func__);
|
|
}
|
|
|
|
offset = dev * ID_BLACKBOX_MAX;
|
|
memcpy(data, tfa->log_data + offset,
|
|
sizeof(int) * ID_BLACKBOX_MAX);
|
|
|
|
/* reset after reading, except MAXX/T_KEEP_LOG */
|
|
memset(tfa->log_data + offset, 0,
|
|
sizeof(int) * TFA_LOG_MAX_COUNT);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_get_blackbox_data);
|
|
|
|
int tfa98xx_get_blackbox_data_index(int dev, int index, int reset)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(0);
|
|
int ndev = 0;
|
|
enum tfa98xx_error ret = TFA98XX_ERROR_OK;
|
|
int offset;
|
|
int value = 0;
|
|
|
|
if (!tfa)
|
|
return -ENODEV;
|
|
if (tfa->tfa_family == 0)
|
|
return -ENODEV;
|
|
|
|
if (index < 0 || index >= ID_BLACKBOX_MAX)
|
|
return -EINVAL;
|
|
|
|
ndev = tfa->dev_count;
|
|
if (ndev < 1)
|
|
return -EINVAL;
|
|
if (dev < 0 || dev >= ndev)
|
|
return -EINVAL;
|
|
|
|
pr_info("%s: blackbox state: %d\n",
|
|
__func__, tfa->blackbox_enable);
|
|
if (tfa->blackbox_enable == 0) {
|
|
pr_info("%s: blackbox disabled - no update\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* update current session if it's active */
|
|
if (tfa98xx_count_active_stream(BIT_PSTREAM) > 0
|
|
&& tfa->is_configured > 0) {
|
|
ret = tfa_update_log();
|
|
if (ret != TFA98XX_ERROR_OK)
|
|
pr_info("%s: failure in updating current data\n",
|
|
__func__);
|
|
}
|
|
|
|
offset = dev * ID_BLACKBOX_MAX;
|
|
value = tfa->log_data[offset + index];
|
|
|
|
/* reset after reading */
|
|
if (reset && (index < TFA_LOG_MAX_COUNT))
|
|
tfa->log_data[offset + index] = 0;
|
|
|
|
return value;
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_get_blackbox_data_index);
|
|
|
|
int tfa98xx_get_blackbox_data_index_channel(int channel,
|
|
int index, int reset)
|
|
{
|
|
int dev = tfa_get_dev_idx_from_inchannel(channel);
|
|
|
|
return tfa98xx_get_blackbox_data_index(dev, index, reset);
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_get_blackbox_data_index_channel);
|
|
|
|
enum tfa98xx_error tfa_run_vval(int index, uint16_t *value)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(index);
|
|
struct tfa_device *ntfa;
|
|
struct tfa98xx *tfa98xx;
|
|
int idx, ndev, ret = 0;
|
|
int test_done = 0;
|
|
|
|
if (!tfa)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
|
|
pr_info("%s: begin\n", __func__);
|
|
|
|
ndev = tfa->dev_count;
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
ntfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (ntfa == NULL)
|
|
continue;
|
|
|
|
/* set V validation */
|
|
ntfa->vval_active = 1;
|
|
ntfa->vval_result = VVAL_UNTESTED;
|
|
}
|
|
|
|
/* check if calibration already runs */
|
|
test_done = tfa_wait_until_calibration_done(tfa);
|
|
|
|
if (!test_done) {
|
|
ret = tfa98xx_run_calibration(tfa98xx);
|
|
if (ret < 0) {
|
|
pr_info("%s: V validation failed\n",
|
|
__func__);
|
|
return TFA98XX_ERROR_FAIL;
|
|
}
|
|
|
|
tfa_wait_until_calibration_done(tfa);
|
|
}
|
|
|
|
if (value == NULL)
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
|
|
*value = tfa->vval_result;
|
|
if ((int)*value < 0) {
|
|
pr_info("%s: V validation is not tested\n",
|
|
__func__);
|
|
*value = 0xffff;
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
|
|
for (idx = 0; idx < ndev; idx++) {
|
|
ntfa = tfa98xx_get_tfa_device_from_index(idx);
|
|
if (ntfa == NULL)
|
|
continue;
|
|
|
|
/* reset V validation */
|
|
ntfa->vval_active = 0;
|
|
}
|
|
|
|
pr_info("%s: end\n", __func__);
|
|
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
EXPORT_SYMBOL(tfa_run_vval);
|
|
|
|
enum tfa98xx_error tfa_get_vval_data(int index, uint16_t *value)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(index);
|
|
|
|
if (!tfa)
|
|
return TFA98XX_ERROR_NOT_OPEN;
|
|
|
|
if (value == NULL)
|
|
return TFA98XX_ERROR_BAD_PARAMETER;
|
|
|
|
*value = tfa->vval_result;
|
|
if ((int)*value < 0) {
|
|
pr_info("%s: V validation is not tested\n",
|
|
__func__);
|
|
*value = 0xffff;
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
|
|
return TFA98XX_ERROR_OK;
|
|
}
|
|
EXPORT_SYMBOL(tfa_get_vval_data);
|
|
|
|
enum tfa98xx_error tfa_get_vval_data_channel(int channel, uint16_t *value)
|
|
{
|
|
int index = tfa_get_dev_idx_from_inchannel(channel);
|
|
|
|
if (index < 0 || index >= MAX_HANDLES)
|
|
return TFA98XX_ERROR_FAIL;
|
|
|
|
return tfa_get_vval_data(index, value);
|
|
}
|
|
EXPORT_SYMBOL(tfa_get_vval_data_channel);
|
|
|
|
int tfa_get_power_state(int index)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(index);
|
|
int pm = 0;
|
|
int state = 0, control = 0;
|
|
|
|
if (tfa == NULL)
|
|
return 0; /* unused device */
|
|
|
|
state = TFA7x_GET_BF(tfa, LP0);
|
|
control = TFA7x_GET_BF(tfa, IPM);
|
|
if ((control == 0x0 || control == 0x3)
|
|
&& (state == 0x1))
|
|
pm |= 0x2; /* idle power */
|
|
switch (tfa->rev & 0xff) {
|
|
case 0x78:
|
|
case 0x74:
|
|
case 0x72:
|
|
case 0x94:
|
|
state = TFA7x_GET_BF(tfa, LP1);
|
|
control = TFA7x_GET_BF(tfa, LPM1MODE);
|
|
if ((control == 0x0 || control == 0x3)
|
|
&& (state == 0x1))
|
|
pm |= 0x1; /* low power */
|
|
break;
|
|
default:
|
|
/* neither TFA987x */
|
|
break;
|
|
}
|
|
|
|
state = TFA_GET_BF(tfa, PWDN);
|
|
if (state == 1)
|
|
pm |= 0x4; /* power down */
|
|
|
|
return pm;
|
|
}
|
|
|
|
int tfa98xx_update_spkt_data(int idx)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(0);
|
|
struct tfa98xx *tfa98xx;
|
|
int ret = 0;
|
|
int value[MAX_HANDLES] = {0};
|
|
int i, ndev, data = 0;
|
|
int pm = 0;
|
|
|
|
if (tfa == NULL)
|
|
return DEFAULT_REF_TEMP; /* unused device */
|
|
if (tfa->tfa_family == 0)
|
|
return DEFAULT_REF_TEMP;
|
|
|
|
if (tfa->active_handle > 0) {
|
|
pr_info("%s: switched to active handle - %d\n",
|
|
__func__, tfa->active_handle);
|
|
tfa = tfa98xx_get_tfa_device_from_index(tfa->active_handle);
|
|
if (tfa == NULL)
|
|
return DEFAULT_REF_TEMP;
|
|
if (tfa->tfa_family == 0)
|
|
return DEFAULT_REF_TEMP;
|
|
}
|
|
|
|
ndev = tfa->dev_count;
|
|
#if !defined(TFA_STEREO_NODE)
|
|
if (ndev == 1 && idx > 0)
|
|
idx = 0; /* use device 0 in mono, by force */
|
|
#endif
|
|
if ((ndev < 1)
|
|
|| (idx < 0 || idx >= ndev))
|
|
return DEFAULT_REF_TEMP;
|
|
|
|
if (tfa98xx_count_active_stream(BIT_PSTREAM) == 0) {
|
|
pr_info("%s: skipped - tfadsp is not active!\n",
|
|
__func__);
|
|
return DEFAULT_REF_TEMP;
|
|
}
|
|
|
|
if (tfa->is_bypass) {
|
|
pr_info("%s: skipped - tfadsp in bypass\n",
|
|
__func__);
|
|
return DEFAULT_REF_TEMP;
|
|
}
|
|
|
|
if (tfa->is_calibrating) {
|
|
pr_info("%s: skipped - tfadsp is running calibraion!\n",
|
|
__func__);
|
|
return DEFAULT_REF_TEMP;
|
|
}
|
|
|
|
pm = tfa_get_power_state(idx);
|
|
pr_info("%s: tfa_stc - dev %d - power state 0x%x\n",
|
|
__func__, idx, pm);
|
|
|
|
if (pm > 0) /* reset temperature in low power state */
|
|
return DEFAULT_REF_TEMP;
|
|
|
|
if (tfa->is_configured <= 0) {
|
|
pr_info("%s: skipped - tfadsp is not active\n",
|
|
__func__);
|
|
return DEFAULT_REF_TEMP;
|
|
}
|
|
|
|
pr_info("%s: tfa_stc - read tspkr for stc\n",
|
|
__func__);
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
ret = tfa_read_tspkr(tfa, value);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
if (ret) {
|
|
pr_info("%s: tfa_stc failed to read data from amplifier\n",
|
|
__func__);
|
|
value[idx] = DEFAULT_REF_TEMP;
|
|
}
|
|
if (value[idx] == 0xffff) {
|
|
pr_info("%s: tfa_stc read wrong data from amplifier\n",
|
|
__func__);
|
|
}
|
|
data = value[idx];
|
|
|
|
for (i = 0; i < ndev; i++)
|
|
pr_debug("%s: data[%d]%s - %d\n", __func__, i,
|
|
(idx == i) ? "*" : "", value[i]);
|
|
|
|
return data;
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_update_spkt_data);
|
|
|
|
int tfa98xx_update_spkt_data_channel(int channel)
|
|
{
|
|
int idx = tfa_get_dev_idx_from_inchannel(channel);
|
|
|
|
return tfa98xx_update_spkt_data(idx);
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_update_spkt_data_channel);
|
|
|
|
int tfa98xx_write_sknt_control(int idx, int value)
|
|
{
|
|
struct tfa_device *tfa = tfa98xx_get_tfa_device_from_index(0);
|
|
struct tfa98xx *tfa98xx;
|
|
int ret = 0;
|
|
int pm = 0;
|
|
int i, ndev, ready = 0;
|
|
static int data[MAX_HANDLES];
|
|
static int update[MAX_HANDLES];
|
|
|
|
if (tfa == NULL)
|
|
return -ENODEV;
|
|
if (tfa->tfa_family == 0)
|
|
return -ENODEV;
|
|
|
|
if (tfa->active_handle > 0) {
|
|
pr_info("%s: switched to active handle - %d\n",
|
|
__func__, tfa->active_handle);
|
|
tfa = tfa98xx_get_tfa_device_from_index(tfa->active_handle);
|
|
if (tfa == NULL)
|
|
return -ENODEV;
|
|
if (tfa->tfa_family == 0)
|
|
return -ENODEV;
|
|
}
|
|
|
|
ndev = tfa->dev_count;
|
|
#if !defined(TFA_STEREO_NODE)
|
|
if (ndev == 1 && idx > 0)
|
|
idx = 0; /* use device 0 in mono, by force */
|
|
#endif
|
|
if ((ndev < 1)
|
|
|| (idx < 0 || idx >= ndev))
|
|
return -EINVAL;
|
|
|
|
if (tfa98xx_count_active_stream(BIT_PSTREAM) == 0) {
|
|
pr_info("%s: skipped - no active stream!\n",
|
|
__func__);
|
|
goto tfa98xx_write_sknt_control_exit;
|
|
}
|
|
|
|
if (tfa->is_bypass) {
|
|
pr_info("%s: skipped - tfadsp in bypass\n",
|
|
__func__);
|
|
goto tfa98xx_write_sknt_control_exit;
|
|
}
|
|
|
|
if (tfa->is_calibrating) {
|
|
pr_info("%s: skipped - tfadsp is running calibraion!\n",
|
|
__func__);
|
|
goto tfa98xx_write_sknt_control_exit;
|
|
}
|
|
|
|
if (tfa->is_configured <= 0) {
|
|
pr_info("%s: skipped - tfadsp is not active\n",
|
|
__func__);
|
|
goto tfa98xx_write_sknt_control_exit;
|
|
}
|
|
|
|
pm = tfa_get_power_state(idx);
|
|
if (pm & 0x4) { /* skip if device is powered down */
|
|
pr_info("%s: tfa_stc - skip dev %d - power state 0x%x\n",
|
|
__func__, idx, pm);
|
|
return ret;
|
|
}
|
|
|
|
pr_info("%s: tfa_stc - dev %d - set surface temperature (%d)\n",
|
|
__func__, idx, value);
|
|
if (update[idx])
|
|
pr_debug("%s: tfa_stc - dev %d - overwrite data\n",
|
|
__func__, idx);
|
|
|
|
data[idx] = value;
|
|
update[idx] = 1;
|
|
|
|
for (i = 0; i < ndev; i++) {
|
|
pm = tfa_get_power_state(i);
|
|
if (pm & 0x4) { /* count power down */
|
|
pr_info("%s: tfa_stc - dev %d: check power down\n",
|
|
__func__, i);
|
|
ready++;
|
|
data[i] = DEFAULT_REF_TEMP;
|
|
continue;
|
|
}
|
|
|
|
if (update[i] > 0)
|
|
ready++;
|
|
}
|
|
|
|
if (ready < ndev)
|
|
/* wait until all the active devices are ready */
|
|
return ret;
|
|
|
|
pr_info("%s: tfa_stc - write volume for stc\n",
|
|
__func__);
|
|
|
|
tfa98xx = (struct tfa98xx *)tfa->data;
|
|
|
|
mutex_lock(&tfa98xx->dsp_lock);
|
|
tfa->individual_msg = 1;
|
|
ret = tfa_write_volume(tfa, data);
|
|
mutex_unlock(&tfa98xx->dsp_lock);
|
|
if (ret) {
|
|
pr_info("%s: tfa_stc failed to write data to amplifier\n",
|
|
__func__);
|
|
goto tfa98xx_write_sknt_control_exit;
|
|
}
|
|
|
|
for (i = 0; i < ndev; i++)
|
|
pr_debug("%s: data[%d]%s - %d\n", __func__, i,
|
|
(update[i]) ? "*" : "", data[i]);
|
|
|
|
tfa98xx_write_sknt_control_exit:
|
|
pr_info("%s: tfa_stc - reset update flags\n",
|
|
__func__);
|
|
memset(update, 0, ndev * sizeof(int));
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_write_sknt_control);
|
|
|
|
int tfa98xx_write_sknt_control_channel(int channel, int value)
|
|
{
|
|
int idx = tfa_get_dev_idx_from_inchannel(channel);
|
|
|
|
return tfa98xx_write_sknt_control(idx, value);
|
|
}
|
|
EXPORT_SYMBOL(tfa98xx_write_sknt_control_channel);
|
|
|
|
int tfa98xx_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct snd_soc_dai_driver *dai;
|
|
struct tfa98xx *tfa98xx;
|
|
struct device_node *np = i2c->dev.of_node;
|
|
int irq_flags;
|
|
unsigned int reg;
|
|
int ret;
|
|
|
|
pr_info("%s: start probing\n", __func__);
|
|
pr_info("addr=0x%x\n", i2c->addr);
|
|
|
|
if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(&i2c->dev, "check_functionality failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
tfa98xx = devm_kzalloc(&i2c->dev,
|
|
sizeof(struct tfa98xx), GFP_KERNEL);
|
|
if (tfa98xx == NULL)
|
|
return -ENOMEM;
|
|
|
|
tfa98xx->dev = &i2c->dev;
|
|
tfa98xx->i2c = i2c;
|
|
tfa98xx->dsp_init = TFA98XX_DSP_INIT_STOPPED;
|
|
tfa98xx->rate = 48000; /* init to the default sample rate (48kHz) */
|
|
tfa98xx->tfa = NULL;
|
|
|
|
tfa98xx->regmap = devm_regmap_init_i2c(i2c, &tfa98xx_regmap);
|
|
if (IS_ERR(tfa98xx->regmap)) {
|
|
ret = PTR_ERR(tfa98xx->regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_clientdata(i2c, tfa98xx);
|
|
mutex_init(&tfa98xx->dsp_lock);
|
|
init_waitqueue_head(&tfa98xx->wq);
|
|
|
|
if (np) {
|
|
ret = tfa98xx_parse_dt(&i2c->dev, tfa98xx, np);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "Failed to parse DT node\n");
|
|
return ret;
|
|
}
|
|
if (no_start)
|
|
tfa98xx->irq_gpio = -1;
|
|
if (no_reset)
|
|
tfa98xx->reset_gpio = -1;
|
|
} else {
|
|
tfa98xx->reset_gpio = -1;
|
|
tfa98xx->irq_gpio = -1;
|
|
}
|
|
|
|
if (gpio_is_valid(tfa98xx->reset_gpio)) {
|
|
ret = gpio_request_one((unsigned int)tfa98xx->reset_gpio,
|
|
GPIOF_OUT_INIT_HIGH, "TFA98XX_RSTN"); /* RSTN */
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (gpio_is_valid(tfa98xx->irq_gpio)) {
|
|
ret = gpio_request_one((unsigned int)tfa98xx->irq_gpio,
|
|
GPIOF_DIR_IN, "TFA98XX_INT");
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Power up! */
|
|
tfa98xx_ext_reset(tfa98xx);
|
|
|
|
if ((no_start == 0) && (no_reset == 0)) {
|
|
ret = regmap_read(tfa98xx->regmap,
|
|
TFA98XX_DEVICE_REVISION, ®);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to read Revision register: %d\n",
|
|
ret);
|
|
return -EIO;
|
|
}
|
|
|
|
switch (reg & 0xff) {
|
|
case 0x72: /* tfa9872 */
|
|
pr_info("TFA9872 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_CALIBRATION_CTL;
|
|
tfa98xx->flags |= TFA98XX_FLAG_REMOVE_PLOP_NOISE;
|
|
/* tfa98xx->flags |= TFA98XX_FLAG_LP_MODES; */
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
break;
|
|
case 0x74: /* tfa9874 */
|
|
pr_info("TFA9874 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_CALIBRATION_CTL;
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
break;
|
|
case 0x78: /* tfa9878 */
|
|
pr_info("TFA9878 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_CALIBRATION_CTL;
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
break;
|
|
case 0x88: /* tfa9888 */
|
|
pr_info("TFA9888 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_STEREO_DEVICE;
|
|
tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
break;
|
|
case 0x13: /* tfa9912 */
|
|
pr_info("TFA9912 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
/* tfa98xx->flags |= TFA98XX_FLAG_TAPDET_AVAILABLE; */
|
|
break;
|
|
case 0x94: /* tfa9894 */
|
|
pr_info("TFA9894 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
break;
|
|
case 0x80: /* tfa9890 */
|
|
case 0x81: /* tfa9890 */
|
|
pr_info("TFA9890 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS;
|
|
break;
|
|
case 0x92: /* tfa9891 */
|
|
pr_info("TFA9891 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_SAAM_AVAILABLE;
|
|
tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS;
|
|
break;
|
|
case 0x12: /* tfa9895 */
|
|
pr_info("TFA9895 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS;
|
|
break;
|
|
case 0x97:
|
|
pr_info("TFA9897 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
break;
|
|
case 0x96:
|
|
pr_info("TFA9896 detected\n");
|
|
tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS;
|
|
tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE;
|
|
break;
|
|
default:
|
|
pr_info("Unsupported device revision (0x%x)\n",
|
|
reg & 0xff);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
tfa98xx->tfa = devm_kzalloc(&i2c->dev,
|
|
sizeof(struct tfa_device), GFP_KERNEL);
|
|
if (tfa98xx->tfa == NULL)
|
|
return -ENOMEM;
|
|
|
|
tfa98xx->tfa->data = (void *)tfa98xx;
|
|
tfa98xx->tfa->cachep = tfa98xx_cache;
|
|
|
|
if (np) {
|
|
ret = tfa98xx_parse_limit_cal_dt(&i2c->dev, tfa98xx, np);
|
|
if (ret) {
|
|
dev_err(&i2c->dev,
|
|
"Failed to parse DT node for cal range\n");
|
|
/* set default range instead */
|
|
}
|
|
ret = tfa98xx_parse_dummy_cal_dt(&i2c->dev, tfa98xx, np);
|
|
if (ret) {
|
|
dev_err(&i2c->dev,
|
|
"Failed to parse DT node for dummy value for calibration\n");
|
|
/* set default value instead */
|
|
}
|
|
ret = tfa98xx_parse_inchannel_dt(&i2c->dev, tfa98xx, np);
|
|
if (ret) {
|
|
dev_err(&i2c->dev,
|
|
"Failed to parse DT node for inchannel\n");
|
|
/* set default value instead */
|
|
}
|
|
}
|
|
|
|
/* Modify the stream names, by appending the i2c device address.
|
|
* This is used with multicodec, in order to discriminate devices.
|
|
* Stream names appear in the dai definition and in the stream.
|
|
* We create copies of original structures because each device will
|
|
* have its own instance of this structure, with its own address.
|
|
*/
|
|
dai = devm_kzalloc(&i2c->dev, sizeof(tfa98xx_dai), GFP_KERNEL);
|
|
if (!dai)
|
|
return -ENOMEM;
|
|
memcpy(dai, tfa98xx_dai, sizeof(tfa98xx_dai));
|
|
|
|
tfa98xx_append_i2c_address(&i2c->dev,
|
|
i2c,
|
|
NULL,
|
|
0,
|
|
dai,
|
|
ARRAY_SIZE(tfa98xx_dai));
|
|
|
|
ret = snd_soc_register_component(&i2c->dev,
|
|
&soc_component_dev_tfa98xx, dai,
|
|
ARRAY_SIZE(tfa98xx_dai));
|
|
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to register TFA98xx: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (gpio_is_valid(tfa98xx->irq_gpio) &&
|
|
!(tfa98xx->flags & TFA98XX_FLAG_SKIP_INTERRUPTS)) {
|
|
/* register irq handler */
|
|
irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
|
|
ret = devm_request_threaded_irq(&i2c->dev,
|
|
gpio_to_irq((unsigned int)tfa98xx->irq_gpio),
|
|
NULL, tfa98xx_irq, irq_flags,
|
|
"tfa98xx", tfa98xx);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
|
|
gpio_to_irq((unsigned int)tfa98xx->irq_gpio),
|
|
ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_info(&i2c->dev, "Skipping IRQ registration\n");
|
|
/* disable feature support if gpio was invalid */
|
|
tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS;
|
|
}
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
if (no_start == 0)
|
|
tfa98xx_debug_init(tfa98xx, i2c);
|
|
#endif
|
|
/* Register the sysfs files for climax backdoor access */
|
|
ret = sysfs_create_bin_file(&i2c->dev.kobj, &dev_attr_rw);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, rw\n");
|
|
ret = sysfs_create_bin_file(&i2c->dev.kobj, &dev_attr_reg);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, reg\n");
|
|
|
|
ret = device_create_file(&i2c->dev, &dev_attr_calibrate);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, calibrate\n");
|
|
ret = device_create_file(&i2c->dev, &dev_attr_mtpex);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, MTPEX\n");
|
|
ret = device_create_file(&i2c->dev, &dev_attr_re25);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, re25\n");
|
|
|
|
ret = device_create_file(&i2c->dev, &dev_attr_blackbox);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, log\n");
|
|
|
|
ret = device_create_file(&i2c->dev, &dev_attr_gain);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, gain\n");
|
|
|
|
ret = device_create_file(&i2c->dev, &dev_attr_autocal);
|
|
if (ret)
|
|
dev_info(&i2c->dev, "error creating sysfs node, autocal\n");
|
|
|
|
pr_info("%s Probe completed successfully!\n", __func__);
|
|
|
|
INIT_LIST_HEAD(&tfa98xx->list);
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
tfa98xx_device_count++;
|
|
list_add(&tfa98xx->list, &tfa98xx_device_list); /* stack */
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tfa98xx_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c);
|
|
|
|
pr_debug("addr=0x%x\n", i2c->addr);
|
|
|
|
tfa98xx_interrupt_enable(tfa98xx, false);
|
|
|
|
cancel_delayed_work_sync(&tfa98xx->interrupt_work);
|
|
cancel_delayed_work_sync(&tfa98xx->monitor_work);
|
|
|
|
sysfs_remove_bin_file(&i2c->dev.kobj, &dev_attr_reg);
|
|
sysfs_remove_bin_file(&i2c->dev.kobj, &dev_attr_rw);
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
tfa98xx_debug_remove(tfa98xx);
|
|
#endif
|
|
|
|
snd_soc_unregister_component(&i2c->dev);
|
|
|
|
if (gpio_is_valid(tfa98xx->irq_gpio))
|
|
gpio_free((unsigned int)tfa98xx->irq_gpio);
|
|
if (gpio_is_valid(tfa98xx->reset_gpio))
|
|
gpio_free((unsigned int)tfa98xx->reset_gpio);
|
|
|
|
mutex_lock(&tfa98xx_mutex);
|
|
list_del(&tfa98xx->list);
|
|
tfa98xx_device_count--;
|
|
if (tfa98xx_device_count == 0) {
|
|
kfree(tfa98xx_container);
|
|
tfa98xx_container = NULL;
|
|
}
|
|
mutex_unlock(&tfa98xx_mutex);
|
|
|
|
return 0;
|
|
}
|
|
#if 0
|
|
static const struct i2c_device_id tfa98xx_i2c_id[] = {
|
|
{"tfa98xx", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tfa98xx_i2c_id);
|
|
#endif
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id tfa98xx_dt_match[] = {
|
|
{.compatible = "tfa,tfa98xx"},
|
|
{.compatible = "tfa,tfa9872"},
|
|
{.compatible = "tfa,tfa9874"},
|
|
{.compatible = "tfa,tfa9878"},
|
|
{.compatible = "tfa,tfa9888"},
|
|
{.compatible = "tfa,tfa9890"},
|
|
{.compatible = "tfa,tfa9891"},
|
|
{.compatible = "tfa,tfa9894"},
|
|
{.compatible = "tfa,tfa9895"},
|
|
{.compatible = "tfa,tfa9896"},
|
|
{.compatible = "tfa,tfa9897"},
|
|
{.compatible = "tfa,tfa9912"},
|
|
{},
|
|
};
|
|
#endif
|
|
#if 0
|
|
static struct i2c_driver tfa98xx_i2c_driver = {
|
|
.driver = {
|
|
.name = "tfa98xx",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(tfa98xx_dt_match),
|
|
},
|
|
.probe = tfa98xx_i2c_probe,
|
|
.remove = tfa98xx_i2c_remove,
|
|
.id_table = tfa98xx_i2c_id,
|
|
};
|
|
#endif
|
|
|
|
static int __init tfa98xx_i2c_init(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
pr_info("TFA98XX driver version %s\n", TFA98XX_VERSION);
|
|
|
|
/* Enable debug traces */
|
|
tfa98xx_kmsg_regs = trace_level & 2;
|
|
tfa98xx_ftrace_regs = trace_level & 4;
|
|
|
|
/* Initialize kmem_cache */
|
|
/* Cache name /proc/slabinfo */
|
|
tfa98xx_cache = kmem_cache_create("tfa98xx_cache",
|
|
PAGE_SIZE, /* Structure size, we should fit in single page */
|
|
0, /* Structure alignment */
|
|
(SLAB_HWCACHE_ALIGN | SLAB_RECLAIM_ACCOUNT |
|
|
SLAB_MEM_SPREAD), /* Cache property */
|
|
NULL); /* Object constructor */
|
|
if (!tfa98xx_cache) {
|
|
pr_err("tfa98xx can't create memory pool\n");
|
|
ret = -ENOMEM;
|
|
}
|
|
#if 0
|
|
ret = i2c_add_driver(&tfa98xx_i2c_driver);
|
|
#endif
|
|
return ret;
|
|
}
|
|
module_init(tfa98xx_i2c_init);
|
|
|
|
static void __exit tfa98xx_i2c_exit(void)
|
|
{
|
|
#if 0
|
|
i2c_del_driver(&tfa98xx_i2c_driver);
|
|
#endif
|
|
kmem_cache_destroy(tfa98xx_cache);
|
|
}
|
|
module_exit(tfa98xx_i2c_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC TFA98XX driver");
|
|
MODULE_LICENSE("GPL");
|
|
|