52 lines
1.5 KiB
Plaintext
52 lines
1.5 KiB
Plaintext
Marvell ICU Interrupt Controller
|
|
--------------------------------
|
|
|
|
The Marvell ICU (Interrupt Consolidation Unit) controller is
|
|
responsible for collecting all wired-interrupt sources in the CP and
|
|
communicating them to the GIC in the AP, the unit translates interrupt
|
|
requests on input wires to MSG memory mapped transactions to the GIC.
|
|
|
|
Required properties:
|
|
|
|
- compatible: Should be "marvell,cp110-icu"
|
|
|
|
- reg: Should contain ICU registers location and length.
|
|
|
|
- #interrupt-cells: Specifies the number of cells needed to encode an
|
|
interrupt source. The value shall be 3.
|
|
|
|
The 1st cell is the group type of the ICU interrupt. Possible group
|
|
types are:
|
|
|
|
ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
|
|
ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure
|
|
ICU_GRP_SEI (0x4) : System error interrupt
|
|
ICU_GRP_REI (0x5) : RAM error interrupt
|
|
|
|
The 2nd cell is the index of the interrupt in the ICU unit.
|
|
|
|
The 3rd cell is the type of the interrupt. See arm,gic.txt for
|
|
details.
|
|
|
|
- interrupt-controller: Identifies the node as an interrupt
|
|
controller.
|
|
|
|
- msi-parent: Should point to the GICP controller, the GIC extension
|
|
that allows to trigger interrupts using MSG memory mapped
|
|
transactions.
|
|
|
|
Example:
|
|
|
|
icu: interrupt-controller@1e0000 {
|
|
compatible = "marvell,cp110-icu";
|
|
reg = <0x1e0000 0x10>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
msi-parent = <&gicp>;
|
|
};
|
|
|
|
usb3h0: usb3@500000 {
|
|
interrupt-parent = <&icu>;
|
|
interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|