32 lines
1.1 KiB
Plaintext
32 lines
1.1 KiB
Plaintext
Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
|
|
|
|
Synopsys DesignWare provides interrupt controller IP for APB known as
|
|
dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
|
|
APB bus, e.g. Marvell Armada 1500.
|
|
|
|
Required properties:
|
|
- compatible: shall be "snps,dw-apb-ictl"
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region starting with ENABLE_LOW register
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
|
- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
|
|
- interrupts: interrupt reference to primary interrupt controller
|
|
|
|
The interrupt sources map to the corresponding bits in the interrupt
|
|
registers, i.e.
|
|
- 0 maps to bit 0 of low interrupts,
|
|
- 1 maps to bit 1 of low interrupts,
|
|
- 32 maps to bit 0 of high interrupts,
|
|
- 33 maps to bit 1 of high interrupts,
|
|
- (optional) fast interrupts start at 64.
|
|
|
|
Example:
|
|
aic: interrupt-controller@3000 {
|
|
compatible = "snps,dw-apb-ictl";
|
|
reg = <0x3000 0xc00>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|