27 lines
990 B
Plaintext
27 lines
990 B
Plaintext
Devicetree bindings for Maxim DS2760
|
|
====================================
|
|
|
|
The ds2760 is a w1 slave device and must hence have its sub-node in DT
|
|
under a w1 bus master node.
|
|
|
|
The device exposes a power supply, so the details described in
|
|
Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
|
|
|
|
Required properties:
|
|
- compatible: must be "maxim,ds2760"
|
|
|
|
Optional properties:
|
|
- power-supplies: Refers to one or more power supplies connected to
|
|
this battery.
|
|
- maxim,pmod-enabled: This boolean property enables the DS2760 to enter
|
|
sleep mode when the DQ line goes low for greater
|
|
than 2 seconds and leave sleep Mode when the DQ
|
|
line goes high.
|
|
- maxim,cache-time-ms: Time im milliseconds to cache the data for. When
|
|
this time expires, the values are read again from
|
|
the hardware. Defaults to 1000.
|
|
- rated-capacity-microamp-hours:
|
|
The rated capacity of the battery, in mAh.
|
|
If not specified, the value stored in the
|
|
non-volatile chip memory is used.
|