aubrey/kernel_samsung_a34x-permissive
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
kernel_samsung_a34x-permissive/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
Fede2782 6db4831e98
Import A346BXXU4BWK2 kernel source 
Android 14
2024-04-28 15:51:13 +02:00

1118 lines
24 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2016-2017 Zodiac Inflight Innovations
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
chosen {
stdout-path = &uart1;
};
aliases {
mdio-gpio0 = &mdio1;
rtc0 = &ds1341;
};
mdio1: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mdio1>;
gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
&gpio6 4 GPIO_ACTIVE_HIGH>;
phy: ethernet-phy@0 {
pinctrl-0 = <&pinctrl_rmii_phy_irq>;
pinctrl-names = "default";
reg = <0>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
};
};
reg_28p0v: regulator-28p0v {
compatible = "regulator-fixed";
regulator-name = "28V_IN";
regulator-min-microvolt = <28000000>;
regulator-max-microvolt = <28000000>;
regulator-always-on;
};
reg_12p0v: regulator-12p0v {
compatible = "regulator-fixed";
vin-supply = <&reg_28p0v>;
regulator-name = "12V_MAIN";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
};
reg_5p0v_main: regulator-5p0v-main {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "5V_MAIN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_5p0v_user_usb: regulator-5p0v-user-usb {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_user_usb>;
vin-supply = <&reg_5p0v_main>;
regulator-name = "5V_USER_USB";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
startup-delay-us = <1000>;
};
reg_3p3v_pmic: regulator-3p3v-pmic {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "PMIC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
vin-supply = <&reg_3p3v_pmic>;
regulator-name = "GEN_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v_sd: regulator-3p3v-sd {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
vin-supply = <&reg_3p3v>;
regulator-name = "3V3_SD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
startup-delay-us = <1000>;
enable-active-high;
regulator-always-on;
};
reg_3p3v_display: regulator-3p3v-display {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "3V3_DISPLAY";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v_ssd: regulator-3p3v-ssd {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
regulator-name = "3V3_SSD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sound1 {
compatible = "simple-audio-card";
simple-audio-card,name = "Front";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound1_codec>;
simple-audio-card,frame-master = <&sound1_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HPLEFT",
"Headphone Jack", "HPRIGHT",
"LEFTIN", "HPL",
"RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa1>;
sound1_cpu: simple-audio-card,cpu {
sound-dai = <&ssi2>;
};
sound1_codec: simple-audio-card,codec {
sound-dai = <&codec1>;
clocks = <&cs2000>;
};
};
sound2 {
compatible = "simple-audio-card";
simple-audio-card,name = "Back";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound2_codec>;
simple-audio-card,frame-master = <&sound2_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HPLEFT",
"Headphone Jack", "HPRIGHT",
"LEFTIN", "HPL",
"RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa2>;
sound2_cpu: simple-audio-card,cpu {
sound-dai = <&ssi1>;
};
sound2_codec: simple-audio-card,codec {
sound-dai = <&codec2>;
clocks = <&cs2000>;
};
};
panel {
power-supply = <&reg_3p3v_display>;
status = "disabled";
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
disp0: disp0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0>;
status = "disabled";
port@0 {
reg = <0>;
disp0_in_0: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
disp0_out: endpoint {
remote-endpoint = <&tc358767_in>;
};
};
};
cs2000_ref: cs2000-ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
cs2000_in_dummy: cs2000-in-dummy {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
edp_refclk: edp-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
};
&cpu0 {
fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */
1200000 1300000
996000 1275000
852000 1275000
792000 1200000
396000 1200000
>;
};
&reg_arm {
vin-supply = <&sw1a_reg>;
};
&reg_pu {
vin-supply = <&sw1c_reg>;
};
&reg_soc {
vin-supply = <&sw1c_reg>;
};
&ldb {
lvds-channel@0 {
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
rave-sp {
compatible = "zii,rave-sp-rdu2";
current-speed = <1000000>;
#address-cells = <1>;
#size-cells = <1>;
watchdog {
compatible = "zii,rave-sp-watchdog";
};
backlight {
compatible = "zii,rave-sp-backlight";
};
pwrbutton {
compatible = "zii,rave-sp-pwrbutton";
};
eeprom@a3 {
compatible = "zii,rave-sp-eeprom";
reg = <0xa3 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
zii,eeprom-name = "dds-eeprom";
};
eeprom@a4 {
compatible = "zii,rave-sp-eeprom";
reg = <0xa4 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
zii,eeprom-name = "main-eeprom";
};
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
status = "okay";
flash@0 {
compatible = "st,m25p128", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <100000>;
status = "okay";
codec2: codec@18 {
compatible = "ti,tlv320dac3100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_codec2>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
accel@1c {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
compatible = "fsl,mma8451";
reg = <0x1c>;
interrupt-parent = <&gpio1>;
interrupt-names = "int1", "int2";
interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>;
};
hpa2: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpa2>;
reg = <0x60>;
power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0v_main>;
};
edp-bridge@68 {
compatible = "toshiba,tc358767";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tc358767>;
reg = <0x68>;
shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
clock-names = "ref";
clocks = <&edp_refclk>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
tc358767_in: endpoint {
remote-endpoint = <&disp0_out>;
};
};
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
pmic@8 {
compatible = "fsl,pfuze100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pfuze100_irq>;
reg = <0x08>;
interrupt-parent = <&gpio7>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
};
temp-sense@48 {
compatible = "national,lm75";
reg = <0x48>;
};
cs2000: clkgen@4e {
compatible = "cirrus,cs2000-cp";
reg = <0x4e>;
#clock-cells = <0>;
clock-names = "clk_in", "ref_clk";
clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24000000>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
ds1341: rtc@68 {
compatible = "dallas,ds1341";
reg = <0x68>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clock-frequency = <400000>;
status = "okay";
codec1: codec@18 {
compatible = "ti,tlv320dac3100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_codec1>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
touchscreen@20 {
compatible = "syna,rmi4-i2c";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
reg = <0x20>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&reg_5p0v_main>;
vio-supply = <&reg_3p3v>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <2>;
};
rmi4-f11@11 {
reg = <0x11>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
};
rmi4-f12@12 {
reg = <0x12>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
};
};
touchscreen@2a {
compatible = "eeti,exc3000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
reg = <0x2a>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
status = "disabled";
};
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpa1>;
reg = <0x60>;
power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0v_main>;
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&disp0_in_0>;
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
status = "okay";
host@0 {
reg = <0 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
i210: i210@0 {
reg = <0 0 0 0 0>;
};
};
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
no-sdio;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
no-sdio;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
non-removable;
no-sdio;
no-sd;
status = "okay";
};
&sata {
target-supply = <&reg_3p3v_ssd>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rmii";
phy-handle = <&phy>;
phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
phy-supply = <&reg_3p3v>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
switch: switch@0 {
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_switch_irq>;
pinctrl-names = "default";
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <512>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "gigabit_proc";
phy-handle = <&switchphy0>;
};
port@1 {
reg = <1>;
label = "netaux";
phy-handle = <&switchphy1>;
};
port@2 {
reg = <2>;
label = "cpu";
ethernet = <&fec>;
fixed-link {
speed = <100>;
full-duplex;
};
};
port@3 {
reg = <3>;
label = "netright";
phy-handle = <&switchphy3>;
};
port@4 {
reg = <4>;
label = "netleft";
phy-handle = <&switchphy4>;
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
switchphy0: switchphy@0 {
reg = <0>;
interrupt-parent = <&switch>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy1: switchphy@1 {
reg = <1>;
interrupt-parent = <&switch>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy2: switchphy@2 {
reg = <2>;
interrupt-parent = <&switch>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy3: switchphy@3 {
reg = <3>;
interrupt-parent = <&switch>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy4: switchphy@4 {
reg = <4>;
interrupt-parent = <&switch>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
};
};
&usbh1 {
vbus-supply = <&reg_5p0v_main>;
disable-over-current;
maximum-speed = "full-speed";
status = "okay";
};
&usbotg {
vbus-supply = <&reg_5p0v_user_usb>;
disable-over-current;
dr_mode = "host";
status = "okay";
};
&ssi1 {
status = "okay";
};
&ssi2 {
status = "okay";
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
ssi1 {
fsl,audmux-port = <0>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSEL(2) |
IMX_AUDMUX_V2_PTCR_TCSEL(2) |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(2)
>;
};
aud3 {
fsl,audmux-port = <2>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(0)
>;
};
ssi2 {
fsl,audmux-port = <1>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSEL(4) |
IMX_AUDMUX_V2_PTCR_TCSEL(4) |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(4)
>;
};
aud5 {
fsl,audmux-port = <4>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(1)
>;
};
};
&wdog1 {
status = "disabled";
};
&iomuxc {
pinctrl_accel: accelgrp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
>;
};
pinctrl_codec1: dac1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x40000038
>;
};
pinctrl_codec2: dac2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x40000038
>;
};
pinctrl_disp0: disp0grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f9
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f9
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f9
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f9
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f9
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f9
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f9
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f9
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f9
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f9
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f9
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f9
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f9
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f9
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f9
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f9
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f9
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f9
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f9
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f9
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f9
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f9
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f9
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f9
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f9
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f9
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f9
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b1
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x000b1
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b1
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x40010040
MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x100b0
MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_mdio1: bitbangmdiogrp {
fsl,pins = <
/* Bitbang MDIO for DEB Switch */
MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x4001b030
MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40018830
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x10038
>;
};
pinctrl_pfuze100_irq: pfuze100grp {
fsl,pins = <
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x40010000
>;
};
pinctrl_reg_3p3v_sd: mmcsupply1grp {
fsl,pins = <
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x858
>;
};
pinctrl_reg_user_usb: usbotggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038
>;
};
pinctrl_rmii_phy_irq: phygrp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000
>;
};
pinctrl_switch_irq: switchgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x4001b000
>;
};
pinctrl_tc358767: tc358767grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10
>;
};
pinctrl_tpa1: tpa6130-1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x40000038
>;
};
pinctrl_tpa2: tpa6130-2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x40000038
>;
};
pinctrl_ts: tsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x10059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10069
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x1b0b1
>;
};
};
Reference in a new issue View git blame Copy permalink