1462 lines
41 KiB
C
1462 lines
41 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2021 MediaTek Inc.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/mutex.h>
|
|
#include <mach/mt_charging.h>
|
|
#include <mt-plat/battery_common.h>
|
|
#include <mt-plat/battery_meter.h>
|
|
#include <mt-plat/charging.h>
|
|
#include <mt-plat/mtk_boot.h>
|
|
|
|
/* ============================================================ // */
|
|
/* define */
|
|
/* ============================================================ // */
|
|
/* cut off to full */
|
|
#define POST_CHARGING_TIME (30 * 60) /* 30mins */
|
|
#define CV_CHECK_DELAT_FOR_BANDGAP 80 /* 80mV */
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
#define BJT_LIMIT 1200000 /* 1.2W */
|
|
#ifndef TA_START_VCHR_TUNUNG_VOLTAGE
|
|
#define TA_START_VCHR_TUNUNG_VOLTAGE 3700 /* for isink blink issue */
|
|
#define TA_CHARGING_CURRENT CHARGE_CURRENT_1500_00_MA
|
|
#endif /* TA_START_VCHR_TUNUNG_VOLTAG */
|
|
#endif /* MTK_PUMP_EXPRESS_SUPPORT */
|
|
|
|
/* ============================================================ // */
|
|
/* global variable */
|
|
/* ============================================================ // */
|
|
unsigned int g_bcct_flag;
|
|
enum CHR_CURRENT_ENUM g_temp_CC_value = CHARGE_CURRENT_0_00_MA;
|
|
unsigned int g_usb_state = USB_UNCONFIGURED;
|
|
unsigned int charging_full_current; /* = CHARGING_FULL_CURRENT; */ /* mA */
|
|
unsigned int v_cc2topoff_threshold; /* = V_CC2TOPOFF_THRES; */
|
|
enum CHR_CURRENT_ENUM ulc_cv_charging_current; /* = AC_CHARGER_CURRENT; */
|
|
enum kal_bool ulc_cv_charging_current_flag;
|
|
static bool usb_unlimited;
|
|
#if (CONFIG_MTK_GAUGE_VERSION == 20)
|
|
enum BATTERY_VOLTAGE_ENUM g_cv_voltage = BATTERY_VOLT_04_200000_V;
|
|
#endif
|
|
|
|
/* //////////////////////////////////////////////////////////////////////// */
|
|
/* // JEITA */
|
|
/* //////////////////////////////////////////////////////////////////////// */
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
int g_jeita_recharging_voltage = JEITA_RECHARGE_VOLTAGE;
|
|
int g_temp_status = TEMP_POS_10_TO_POS_45;
|
|
enum kal_bool temp_error_recovery_chr_flag = KAL_TRUE;
|
|
#endif
|
|
|
|
/* //////////////////////////////////////////////////////////////////////// */
|
|
/* // PUMP EXPRESS */
|
|
/* //////////////////////////////////////////////////////////////////////// */
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
|
|
struct wakeup_source *TA_charger_suspend_lock;
|
|
CHR_CURRENT_ENUM ta_charging_current = TA_CHARGING_CURRENT;
|
|
int ta_current_level = 5000;
|
|
int ta_pre_vbat;
|
|
enum kal_bool ta_check_chr_type = KAL_TRUE;
|
|
enum kal_bool ta_check_ta_control;
|
|
enum kal_bool ta_vchr_tuning;
|
|
enum kal_bool first_vchr_det = KAL_TRUE;
|
|
enum kal_bool ta_cable_out_occur;
|
|
enum kal_bool is_ta_connect;
|
|
#endif
|
|
|
|
/* ============================================================ // */
|
|
static void __init_charging_varaibles(void)
|
|
{
|
|
static int init_flag;
|
|
|
|
if (init_flag == 0) {
|
|
init_flag = 1;
|
|
charging_full_current = batt_cust_data.charging_full_current;
|
|
v_cc2topoff_threshold = batt_cust_data.v_cc2topoff_thres;
|
|
ulc_cv_charging_current = batt_cust_data.ac_charger_current;
|
|
}
|
|
}
|
|
|
|
void BATTERY_SetUSBState(int usb_state_value)
|
|
{
|
|
#if defined(CONFIG_POWER_EXT)
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[%s] in FPGA/EVB, no service\r\n", __func__);
|
|
#else
|
|
if ((usb_state_value < USB_SUSPEND) ||
|
|
((usb_state_value > USB_CONFIGURED))) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] BAT_SetUSBState Fail! Restore to default value\r\n");
|
|
usb_state_value = USB_UNCONFIGURED;
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] BAT_SetUSBState Success! Set %d\r\n",
|
|
usb_state_value);
|
|
g_usb_state = usb_state_value;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* EXPORT_SYMBOL(BATTERY_SetUSBState); */
|
|
|
|
/* EXPORT_SYMBOL(BATTERY_SetUSBState); */
|
|
#if (CONFIG_MTK_GAUGE_VERSION == 20)
|
|
unsigned int get_cv_voltage(void)
|
|
{
|
|
return g_cv_voltage;
|
|
}
|
|
#endif
|
|
|
|
unsigned int get_charging_setting_current(void)
|
|
{
|
|
return g_temp_CC_value;
|
|
}
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
|
|
static DEFINE_MUTEX(ta_mutex);
|
|
|
|
static void mtk_ta_decrease(void)
|
|
{
|
|
enum kal_bool ta_current_pattern = KAL_FALSE; /* FALSE = decrease */
|
|
|
|
/* if(BMT_status.charger_exist == KAL_TRUE) */
|
|
if (ta_cable_out_occur == KAL_FALSE) {
|
|
battery_charging_control(CHARGING_CMD_SET_TA_CURRENT_PATTERN,
|
|
&ta_current_pattern);
|
|
ta_current_level -= 200;
|
|
} else {
|
|
ta_check_chr_type = KAL_TRUE;
|
|
/* is_ta_connect = KAL_FALSE; */
|
|
battery_log(BAT_LOG_CRTI, "%s() Cable out\n",
|
|
__func__);
|
|
}
|
|
}
|
|
|
|
static void mtk_ta_increase(void)
|
|
{
|
|
enum kal_bool ta_current_pattern = KAL_TRUE; /* TRUE = increase */
|
|
|
|
/* if(BMT_status.charger_exist == KAL_TRUE) */
|
|
if (ta_cable_out_occur == KAL_FALSE) {
|
|
battery_charging_control(CHARGING_CMD_SET_TA_CURRENT_PATTERN,
|
|
&ta_current_pattern);
|
|
ta_current_level += 200;
|
|
} else {
|
|
ta_check_chr_type = KAL_TRUE;
|
|
/* is_ta_connect = KAL_FALSE; */
|
|
battery_log(BAT_LOG_CRTI, "%s() Cable out\n",
|
|
__func__);
|
|
}
|
|
}
|
|
|
|
static void mtk_ta_reset_vchr(void)
|
|
{
|
|
CHR_CURRENT_ENUM chr_current = CHARGE_CURRENT_70_00_MA;
|
|
|
|
battery_charging_control(CHARGING_CMD_SET_CURRENT, &chr_current);
|
|
msleep(250); /* reset Vchr to 5V */
|
|
|
|
ta_current_level = 5000;
|
|
|
|
battery_log(BAT_LOG_CRTI, "%s(): reset Vchr to 5V\n",
|
|
__func__);
|
|
}
|
|
|
|
static void mtk_ta_init(void)
|
|
{
|
|
ta_current_level = 5000;
|
|
is_ta_connect = KAL_FALSE;
|
|
ta_pre_vbat = 0;
|
|
ta_vchr_tuning = KAL_FALSE;
|
|
ta_check_ta_control = KAL_FALSE;
|
|
ta_cable_out_occur = KAL_FALSE;
|
|
|
|
battery_charging_control(CHARGING_CMD_RESET_WATCH_DOG_TIMER, NULL);
|
|
battery_charging_control(CHARGING_CMD_INIT, NULL);
|
|
}
|
|
|
|
int ta_get_charger_voltage(void)
|
|
{
|
|
int voltage = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < 10; i++)
|
|
voltage = voltage + battery_meter_get_charger_voltage();
|
|
|
|
return voltage / 10;
|
|
}
|
|
|
|
static void mtk_ta_detector(void)
|
|
{
|
|
int real_v_chrA;
|
|
int real_v_chrB;
|
|
enum kal_bool retransmit = KAL_TRUE;
|
|
unsigned int retransmit_count = 0;
|
|
unsigned int charging_enable = true;
|
|
|
|
battery_log(BAT_LOG_CRTI, "%s() start\n", __func__);
|
|
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
|
|
do {
|
|
real_v_chrA = ta_get_charger_voltage();
|
|
mtk_ta_decrease();
|
|
mtk_ta_decrease();
|
|
real_v_chrB = ta_get_charger_voltage();
|
|
|
|
if (real_v_chrA - real_v_chrB >= 300) { /* 0.3V */
|
|
retransmit = KAL_FALSE;
|
|
is_ta_connect = KAL_TRUE;
|
|
} else {
|
|
retransmit_count++;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s(): retransmit_count =%d, chrA=%d, chrB=%d\n",
|
|
__func__,
|
|
retransmit_count, real_v_chrA, real_v_chrB);
|
|
|
|
mtk_ta_reset_vchr();
|
|
}
|
|
|
|
if ((retransmit_count == 3) ||
|
|
(BMT_status.charger_exist == KAL_FALSE)) {
|
|
retransmit = KAL_FALSE;
|
|
is_ta_connect = KAL_FALSE;
|
|
}
|
|
|
|
} while ((retransmit == KAL_TRUE) && (ta_cable_out_occur == KAL_FALSE));
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s() ta_current_level=%d, real_v_chrA=%d, real_v_chrB=%d, is_ta_connect=%d\n",
|
|
__func__, ta_current_level, real_v_chrA,
|
|
real_v_chrB, is_ta_connect);
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s() end, retry_count=%d, ta_cable_out_occur=%d\n",
|
|
__func__, retransmit_count, ta_cable_out_occur);
|
|
}
|
|
|
|
static void mtk_tuning_voltage(int curr_level, int target_level)
|
|
{
|
|
int is_increase = 0;
|
|
int exec_level = 0;
|
|
CHR_CURRENT_ENUM chr_current = CHARGE_CURRENT_70_00_MA;
|
|
|
|
/* if(BMT_status.charger_exist == KAL_TRUE) */
|
|
if (ta_cable_out_occur == KAL_FALSE) {
|
|
battery_log(BAT_LOG_CRTI, "%s() start\n",
|
|
__func__);
|
|
|
|
if (curr_level >= target_level) {
|
|
exec_level = (curr_level - target_level) / 200;
|
|
is_increase = 0;
|
|
} else {
|
|
exec_level = (target_level - curr_level) / 200;
|
|
is_increase = 1;
|
|
}
|
|
|
|
if (exec_level == 0) { /* curr_level == target_level */
|
|
battery_charging_control(CHARGING_CMD_SET_CURRENT,
|
|
&chr_current);
|
|
msleep(50);
|
|
/* for VChr reading to check error occur or not */
|
|
}
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s() before : ta_current_level=%d, real_v_chr=%d, is_ta_connect=%d, is_increase=%d, exec_level=%d\n",
|
|
__func__,
|
|
ta_current_level, battery_meter_get_charger_voltage(),
|
|
is_ta_connect, is_increase, exec_level);
|
|
|
|
while ((exec_level > 0) && (ta_cable_out_occur == KAL_FALSE)) {
|
|
if (is_increase == 1)
|
|
mtk_ta_increase();
|
|
else
|
|
mtk_ta_decrease();
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s() after ta_current_level=%d, real_v_chr=%d, is_ta_connect=%d, is_increase=%d, exec_level=%d\n",
|
|
__func__, ta_current_level,
|
|
battery_meter_get_charger_voltage(),
|
|
is_ta_connect, is_increase, exec_level);
|
|
|
|
exec_level--;
|
|
}
|
|
|
|
battery_log(BAT_LOG_CRTI, "%s() end\n", __func__);
|
|
} else {
|
|
ta_check_chr_type = KAL_TRUE;
|
|
/* is_ta_connect = KAL_FALSE; */
|
|
battery_log(BAT_LOG_CRTI, "%s(), Cable Out\n", __func__);
|
|
}
|
|
}
|
|
|
|
static void select_v_chr_candidate(int curr_vbat, int ta_v_chr_candidate[])
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "%s() start\n", __func__);
|
|
|
|
if (curr_vbat > 4200)
|
|
ta_v_chr_candidate[0] = 4600;
|
|
else if (curr_vbat > 4000)
|
|
ta_v_chr_candidate[0] = 4400;
|
|
else if (curr_vbat > 3800)
|
|
ta_v_chr_candidate[0] = 4200;
|
|
else if (curr_vbat > 3600)
|
|
ta_v_chr_candidate[0] = 4000;
|
|
else
|
|
ta_v_chr_candidate[0] = 3800;
|
|
|
|
ta_v_chr_candidate[1] = ta_v_chr_candidate[0] + 200;
|
|
ta_v_chr_candidate[2] = ta_v_chr_candidate[0] + 400;
|
|
ta_v_chr_candidate[3] = ta_v_chr_candidate[0] + 600;
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"%s() vbat=%d, candidate=%d,%d,%d\n",
|
|
__func__, curr_vbat, ta_v_chr_candidate[1],
|
|
ta_v_chr_candidate[2],
|
|
ta_v_chr_candidate[3]);
|
|
|
|
battery_log(BAT_LOG_CRTI, "%s() end\n", __func__);
|
|
}
|
|
|
|
static void mtk_ta_vchr_select(int i, int ta_v_chr_candidate[],
|
|
int ta_charging_current_candidate[],
|
|
int *max_charging_current,
|
|
int *max_charging_current_i)
|
|
{
|
|
int current_vchr;
|
|
enum kal_bool retransmit = KAL_TRUE;
|
|
unsigned int retransmit_count = 0;
|
|
|
|
current_vchr = battery_meter_get_charger_voltage();
|
|
/* pattern error before, so reset vchr to 5V */
|
|
if (ta_current_level != 5000 && current_vchr >= 4900) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s() : curr_VChr=%d, ta_current_level=%d\n",
|
|
__func__, current_vchr, ta_current_level);
|
|
|
|
mtk_ta_reset_vchr();
|
|
}
|
|
|
|
do {
|
|
mtk_tuning_voltage(ta_current_level, ta_v_chr_candidate[i]);
|
|
|
|
current_vchr = battery_meter_get_charger_voltage();
|
|
if ((abs(current_vchr - ta_current_level) > 300) &&
|
|
(ta_cable_out_occur == KAL_FALSE)) {
|
|
/* variation > 0.3V, error occur */
|
|
retransmit_count++;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s(): retransmit_count =%d, cur_chr=%d, ta_current_level=%d\n",
|
|
__func__, retransmit_count, current_vchr,
|
|
ta_current_level);
|
|
|
|
mtk_ta_reset_vchr();
|
|
} else
|
|
retransmit = KAL_FALSE;
|
|
|
|
if ((retransmit_count == 2) || (ta_cable_out_occur == KAL_TRUE))
|
|
retransmit = KAL_FALSE;
|
|
|
|
} while ((retransmit == KAL_TRUE) && (ta_cable_out_occur == KAL_FALSE));
|
|
|
|
/* 1.5A */
|
|
battery_charging_control(CHARGING_CMD_SET_CURRENT,
|
|
&ta_charging_current);
|
|
battery_log(BAT_LOG_CRTI,
|
|
"%s() : use 1.5A for select max current\n",
|
|
__func__);
|
|
msleep(900); /* over 800ms to avoid interference pattern */
|
|
|
|
ta_charging_current_candidate[i] =
|
|
battery_meter_get_charging_current_imm();
|
|
|
|
/* we hope to choose the less VChr if the current */
|
|
/* difference between 2 step */
|
|
/* is not large, so we add weighting for different VChr step*/
|
|
if (i == 1) /* weighting, plus 120mA for Vbat+0.4V */
|
|
ta_charging_current_candidate[i] += 100;
|
|
else if (i == 2) /* weighting, plug 60mA for Vbat+0.6V */
|
|
ta_charging_current_candidate[i] += 50;
|
|
|
|
if (ta_charging_current_candidate[i] > *max_charging_current) {
|
|
*max_charging_current = ta_charging_current_candidate[i];
|
|
*max_charging_current_i = i;
|
|
}
|
|
}
|
|
|
|
static void mtk_ta_BJT_check(void)
|
|
{
|
|
int curr_vbat = 0;
|
|
int curr_current = 0;
|
|
int vchr = 0;
|
|
int watt = 0;
|
|
int i = 0, cnt = 0;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
vchr = battery_meter_get_charger_voltage();
|
|
curr_vbat = battery_meter_get_battery_voltage(KAL_TRUE);
|
|
curr_current = battery_meter_get_charging_current_imm();
|
|
|
|
watt = ((vchr - curr_vbat) * curr_current);
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s() vchr=%d, vbat=%d, current=%d, Watt=%d, ta_current_level=%d\n",
|
|
__func__, vchr, curr_vbat, curr_current,
|
|
watt, ta_current_level);
|
|
|
|
if (watt > BJT_LIMIT) /* 1.2W */
|
|
cnt++;
|
|
else
|
|
break;
|
|
|
|
msleep(200);
|
|
}
|
|
|
|
if (cnt >= 3)
|
|
is_ta_connect = KAL_FALSE;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s() vchr=%d, vbat=%d, current=%d, Watt=%d, ta_current_level=%d cnt=%d\n",
|
|
__func__, vchr, curr_vbat, curr_current,
|
|
watt, ta_current_level, cnt);
|
|
}
|
|
|
|
static void battery_pump_express_charger_check(void)
|
|
{
|
|
if (ta_check_chr_type == KAL_TRUE &&
|
|
BMT_status.charger_type == STANDARD_CHARGER) {
|
|
mutex_lock(&ta_mutex);
|
|
__pm_stay_awake(TA_charger_suspend_lock);
|
|
|
|
mtk_ta_reset_vchr();
|
|
mtk_ta_init();
|
|
mtk_ta_detector();
|
|
|
|
first_vchr_det = KAL_TRUE;
|
|
|
|
if (ta_cable_out_occur == KAL_FALSE) {
|
|
ta_check_chr_type = KAL_FALSE;
|
|
} else {
|
|
/* need to re-check if the charger plug out during ta */
|
|
/* detector */
|
|
ta_check_chr_type = KAL_TRUE;
|
|
}
|
|
|
|
__pm_relax(TA_charger_suspend_lock);
|
|
mutex_unlock(&ta_mutex);
|
|
}
|
|
}
|
|
|
|
static void battery_pump_express_algorithm_start(void)
|
|
{
|
|
int ta_v_chr_candidate[4] = {0, 0, 0, 0};
|
|
int ta_charging_current_candidate[4] = {0, 0, 0, 0};
|
|
int max_charging_current = 0;
|
|
int max_charging_current_i = 0;
|
|
int curr_vbat = 0;
|
|
int i = 0;
|
|
int ta_cv_vchr;
|
|
unsigned int cv_voltage;
|
|
|
|
if (batt_cust_data.high_battery_voltage_support)
|
|
cv_voltage = 4350;
|
|
else
|
|
cv_voltage = 4200;
|
|
|
|
mutex_lock(&ta_mutex);
|
|
__pm_stay_awake(TA_charger_suspend_lock);
|
|
|
|
if (is_ta_connect == KAL_TRUE) {
|
|
battery_log(BAT_LOG_CRTI, "mtk_ta_algorithm() start\n");
|
|
|
|
curr_vbat = battery_meter_get_battery_voltage(KAL_TRUE);
|
|
if (((curr_vbat - ta_pre_vbat) > 100) &&
|
|
(curr_vbat <
|
|
(cv_voltage - (CV_CHECK_DELAT_FOR_BANDGAP + 20))) &&
|
|
(curr_vbat > TA_START_VCHR_TUNUNG_VOLTAGE)) {
|
|
/*cv -0.12V && to avoid screen flash( VBAT less than */
|
|
/* 3.7V) */
|
|
ta_pre_vbat = curr_vbat;
|
|
|
|
select_v_chr_candidate(curr_vbat, ta_v_chr_candidate);
|
|
|
|
if (first_vchr_det == KAL_TRUE) {
|
|
for (i = 3; i >= 1;
|
|
i--) {
|
|
/* measure VBAT+0.8V, VBAT+0.6V */
|
|
/* then VBAT+0.4V */
|
|
if (ta_cable_out_occur == KAL_FALSE)
|
|
mtk_ta_vchr_select(
|
|
i, ta_v_chr_candidate,
|
|
ta_charging_current_candidate,
|
|
&max_charging_current,
|
|
&max_charging_current_i);
|
|
}
|
|
|
|
first_vchr_det = KAL_FALSE;
|
|
} else {
|
|
for (
|
|
i = 1; i <= 3;
|
|
i++) {
|
|
/* measure VBAT+0.4V,VBAT+0.6V */
|
|
/* then VBAT+0.8V */
|
|
if (ta_cable_out_occur == KAL_FALSE)
|
|
mtk_ta_vchr_select(
|
|
i, ta_v_chr_candidate,
|
|
ta_charging_current_candidate,
|
|
&max_charging_current,
|
|
&max_charging_current_i);
|
|
}
|
|
}
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"mtk_ta_algorithm() candidate=%d,%d,%d,%d ; i=%d,%d,%d,%d ; max_charging_current_i=%d\n",
|
|
ta_v_chr_candidate[0], ta_v_chr_candidate[1],
|
|
ta_v_chr_candidate[2], ta_v_chr_candidate[3],
|
|
ta_charging_current_candidate[0],
|
|
ta_charging_current_candidate[1],
|
|
ta_charging_current_candidate[2],
|
|
ta_charging_current_candidate[3],
|
|
max_charging_current_i);
|
|
|
|
mtk_tuning_voltage(
|
|
ta_current_level,
|
|
ta_v_chr_candidate[max_charging_current_i]);
|
|
|
|
ta_vchr_tuning = KAL_TRUE;
|
|
ta_check_ta_control = KAL_TRUE;
|
|
} else if (curr_vbat >=
|
|
(cv_voltage - (CV_CHECK_DELAT_FOR_BANDGAP + 20))) {
|
|
if (cv_voltage == 4200)
|
|
ta_cv_vchr = 4800;
|
|
else /* cv 4.35V */
|
|
ta_cv_vchr = 5000;
|
|
|
|
if (ta_current_level != ta_cv_vchr)
|
|
mtk_tuning_voltage(ta_current_level,
|
|
ta_cv_vchr);
|
|
|
|
ta_vchr_tuning = KAL_TRUE;
|
|
ta_check_ta_control = KAL_FALSE;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"mtk_ta_algorithm(),curr_vbat > cv_voltage, ta_current_level=%d, cv_voltage=%d, ta_cv_vchr=%d,",
|
|
ta_current_level, cv_voltage, ta_cv_vchr);
|
|
}
|
|
|
|
/* --for normal charging */
|
|
if ((is_ta_connect == KAL_TRUE) &&
|
|
(curr_vbat > TA_START_VCHR_TUNUNG_VOLTAGE) &&
|
|
(ta_check_ta_control == KAL_TRUE)) {
|
|
/* to avoid screen flash( VBAT less than 3.7V) */
|
|
battery_charging_control(
|
|
CHARGING_CMD_SET_CURRENT,
|
|
&ta_charging_current); /* 1.5A */
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"mtk_ta_algorithm() : detect TA, use 1.5A for normal charging, curr_vbat=%d, ta_pre_vbat=%d, ta_current_level=%d\n",
|
|
curr_vbat, ta_pre_vbat, ta_current_level);
|
|
/* msleep(1500); */
|
|
}
|
|
/* ------------------------ */
|
|
|
|
mtk_ta_BJT_check();
|
|
battery_log(BAT_LOG_CRTI, "mtk_ta_algorithm() end\n");
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"It's not a TA charger, bypass TA algorithm\n");
|
|
}
|
|
|
|
__pm_relax(TA_charger_suspend_lock);
|
|
mutex_unlock(&ta_mutex);
|
|
}
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
|
|
static BATTERY_VOLTAGE_ENUM select_jeita_cv(void)
|
|
{
|
|
BATTERY_VOLTAGE_ENUM cv_voltage;
|
|
|
|
if (g_temp_status == TEMP_ABOVE_POS_60) {
|
|
cv_voltage = JEITA_TEMP_ABOVE_POS_60_CV_VOLTAGE;
|
|
} else if (g_temp_status == TEMP_POS_45_TO_POS_60) {
|
|
cv_voltage = JEITA_TEMP_POS_45_TO_POS_60_CV_VOLTAGE;
|
|
} else if (g_temp_status == TEMP_POS_10_TO_POS_45) {
|
|
if (batt_cust_data.high_battery_voltage_support)
|
|
cv_voltage = BATTERY_VOLT_04_350000_V;
|
|
else
|
|
cv_voltage = JEITA_TEMP_POS_10_TO_POS_45_CV_VOLTAGE;
|
|
|
|
} else if (g_temp_status == TEMP_POS_0_TO_POS_10) {
|
|
cv_voltage = JEITA_TEMP_POS_0_TO_POS_10_CV_VOLTAGE;
|
|
} else if (g_temp_status == TEMP_NEG_10_TO_POS_0) {
|
|
cv_voltage = JEITA_TEMP_NEG_10_TO_POS_0_CV_VOLTAGE;
|
|
} else if (g_temp_status == TEMP_BELOW_NEG_10) {
|
|
cv_voltage = JEITA_TEMP_BELOW_NEG_10_CV_VOLTAGE;
|
|
} else {
|
|
cv_voltage = BATTERY_VOLT_04_200000_V;
|
|
}
|
|
|
|
return cv_voltage;
|
|
}
|
|
|
|
unsigned int do_jeita_state_machine(void)
|
|
{
|
|
BATTERY_VOLTAGE_ENUM cv_voltage;
|
|
|
|
/* JEITA battery temp Standard */
|
|
if (BMT_status.temperature >= TEMP_POS_60_THRESHOLD) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Over high Temperature(%d) !!\n\r",
|
|
TEMP_POS_60_THRESHOLD);
|
|
g_temp_status = TEMP_ABOVE_POS_60;
|
|
return PMU_STATUS_FAIL;
|
|
} else if (BMT_status.temperature > TEMP_POS_45_THRESHOLD) {
|
|
if ((g_temp_status == TEMP_ABOVE_POS_60) &&
|
|
(BMT_status.temperature >=
|
|
TEMP_POS_60_THRES_MINUS_X_DEGREE)) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature between %d and %d,not allow charging yet!!\n\r",
|
|
TEMP_POS_60_THRES_MINUS_X_DEGREE,
|
|
TEMP_POS_60_THRESHOLD);
|
|
return PMU_STATUS_FAIL;
|
|
} /*else { */
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature between %d and %d !!\n\r",
|
|
TEMP_POS_45_THRESHOLD, TEMP_POS_60_THRESHOLD);
|
|
g_temp_status = TEMP_POS_45_TO_POS_60;
|
|
g_jeita_recharging_voltage =
|
|
JEITA_TEMP_POS_45_TO_POS_60_RECHARGE_VOLTAGE;
|
|
v_cc2topoff_threshold =
|
|
JEITA_TEMP_POS_45_TO_POS_60_CC2TOPOFF_THRESHOLD;
|
|
charging_full_current = batt_cust_data.charging_full_current;
|
|
/*} */
|
|
} else if (BMT_status.temperature >= TEMP_POS_10_THRESHOLD) {
|
|
if (((g_temp_status == TEMP_POS_45_TO_POS_60) &&
|
|
(BMT_status.temperature >=
|
|
TEMP_POS_45_THRES_MINUS_X_DEGREE)) ||
|
|
((g_temp_status == TEMP_POS_0_TO_POS_10) &&
|
|
(BMT_status.temperature <=
|
|
TEMP_POS_10_THRES_PLUS_X_DEGREE))) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature not recovery to normal temperature charging mode yet!!\n\r");
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Normal Temperature between %d and %d !!\n\r",
|
|
TEMP_POS_10_THRESHOLD, TEMP_POS_45_THRESHOLD);
|
|
|
|
g_temp_status = TEMP_POS_10_TO_POS_45;
|
|
if (batt_cust_data.high_battery_voltage_support)
|
|
g_jeita_recharging_voltage = 4200;
|
|
else
|
|
g_jeita_recharging_voltage =
|
|
JEITA_TEMP_POS_10_TO_POS_45_RECHARGE_VOLTAGE;
|
|
|
|
v_cc2topoff_threshold =
|
|
JEITA_TEMP_POS_10_TO_POS_45_CC2TOPOFF_THRESHOLD;
|
|
charging_full_current =
|
|
batt_cust_data.charging_full_current;
|
|
}
|
|
} else if (BMT_status.temperature >= TEMP_POS_0_THRESHOLD) {
|
|
if ((g_temp_status == TEMP_NEG_10_TO_POS_0 ||
|
|
g_temp_status == TEMP_BELOW_NEG_10) &&
|
|
(BMT_status.temperature <=
|
|
TEMP_POS_0_THRES_PLUS_X_DEGREE)) {
|
|
if (g_temp_status == TEMP_NEG_10_TO_POS_0) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature between %d and %d !!\n\r",
|
|
TEMP_POS_0_THRES_PLUS_X_DEGREE,
|
|
TEMP_POS_10_THRESHOLD);
|
|
}
|
|
if (g_temp_status == TEMP_BELOW_NEG_10) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature between %d and %d,not allow charging yet!!\n\r",
|
|
TEMP_POS_0_THRESHOLD,
|
|
TEMP_POS_0_THRES_PLUS_X_DEGREE);
|
|
return PMU_STATUS_FAIL;
|
|
}
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature between %d and %d !!\n\r",
|
|
TEMP_POS_0_THRESHOLD, TEMP_POS_10_THRESHOLD);
|
|
g_temp_status = TEMP_POS_0_TO_POS_10;
|
|
g_jeita_recharging_voltage =
|
|
JEITA_TEMP_POS_0_TO_POS_10_RECHARGE_VOLTAGE;
|
|
v_cc2topoff_threshold =
|
|
JEITA_TEMP_POS_0_TO_POS_10_CC2TOPOFF_THRESHOLD;
|
|
charging_full_current =
|
|
batt_cust_data.charging_full_current;
|
|
}
|
|
} else if (BMT_status.temperature >= TEMP_NEG_10_THRESHOLD) {
|
|
if ((g_temp_status == TEMP_BELOW_NEG_10) &&
|
|
(BMT_status.temperature <=
|
|
TEMP_NEG_10_THRES_PLUS_X_DEGREE)) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature between %d and %d,not allow charging yet!!\n\r",
|
|
TEMP_NEG_10_THRESHOLD,
|
|
TEMP_NEG_10_THRES_PLUS_X_DEGREE);
|
|
return PMU_STATUS_FAIL;
|
|
} /*else { */
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Temperature between %d and %d !!\n\r",
|
|
TEMP_NEG_10_THRESHOLD, TEMP_POS_0_THRESHOLD);
|
|
g_temp_status = TEMP_NEG_10_TO_POS_0;
|
|
g_jeita_recharging_voltage =
|
|
JEITA_TEMP_NEG_10_TO_POS_0_RECHARGE_VOLTAGE;
|
|
v_cc2topoff_threshold =
|
|
JEITA_TEMP_NEG_10_TO_POS_0_CC2TOPOFF_THRESHOLD;
|
|
charging_full_current = JEITA_NEG_10_TO_POS_0_FULL_CURRENT;
|
|
/*} */
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery below low Temperature(%d) !!\n\r",
|
|
TEMP_NEG_10_THRESHOLD);
|
|
g_temp_status = TEMP_BELOW_NEG_10;
|
|
return PMU_STATUS_FAIL;
|
|
}
|
|
|
|
cv_voltage = select_jeita_cv();
|
|
battery_charging_control(CHARGING_CMD_SET_CV_VOLTAGE, &cv_voltage);
|
|
|
|
#if defined(CONFIG_MTK_HAFG_20)
|
|
g_cv_voltage = cv_voltage;
|
|
#endif
|
|
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
static void set_jeita_charging_current(void)
|
|
{
|
|
#ifdef CONFIG_USB_IF
|
|
if (BMT_status.charger_type == STANDARD_HOST)
|
|
return;
|
|
#endif
|
|
|
|
if (g_temp_status == TEMP_NEG_10_TO_POS_0) {
|
|
g_temp_CC_value = CHARGE_CURRENT_200_00_MA; /* for low temp */
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] JEITA set charging current : %d\r\n",
|
|
g_temp_CC_value);
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
bool get_usb_current_unlimited(void)
|
|
{
|
|
if (BMT_status.charger_type == STANDARD_HOST ||
|
|
BMT_status.charger_type == CHARGING_HOST)
|
|
return usb_unlimited;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
void set_usb_current_unlimited(bool enable)
|
|
{
|
|
usb_unlimited = enable;
|
|
}
|
|
|
|
void select_charging_curret_bcct(void)
|
|
{
|
|
enum CHR_CURRENT_ENUM chr_type_ichg = 0;
|
|
|
|
switch (BMT_status.charger_type) {
|
|
case STANDARD_HOST:
|
|
chr_type_ichg = batt_cust_data.usb_charger_current;
|
|
break;
|
|
case NONSTANDARD_CHARGER:
|
|
chr_type_ichg = batt_cust_data.non_std_ac_charger_current;
|
|
break;
|
|
case STANDARD_CHARGER:
|
|
chr_type_ichg = batt_cust_data.ac_charger_current;
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
if (is_ta_connect == KAL_TRUE && ta_vchr_tuning == KAL_TRUE)
|
|
chr_type_ichg = CHARGE_CURRENT_1500_00_MA;
|
|
#endif
|
|
break;
|
|
case CHARGING_HOST:
|
|
chr_type_ichg = batt_cust_data.charging_host_charger_current;
|
|
break;
|
|
case APPLE_2_1A_CHARGER:
|
|
chr_type_ichg = batt_cust_data.apple_2_1a_charger_current;
|
|
break;
|
|
case APPLE_1_0A_CHARGER:
|
|
chr_type_ichg = batt_cust_data.apple_1_0a_charger_current;
|
|
break;
|
|
case APPLE_0_5A_CHARGER:
|
|
chr_type_ichg = batt_cust_data.apple_0_5a_charger_current;
|
|
break;
|
|
default:
|
|
chr_type_ichg = CHARGE_CURRENT_500_00_MA;
|
|
break;
|
|
}
|
|
|
|
if (g_temp_CC_value > chr_type_ichg)
|
|
g_temp_CC_value = chr_type_ichg;
|
|
}
|
|
|
|
unsigned int set_bat_charging_current_limit(int current_limit)
|
|
{
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] %s (%d)\r\n",
|
|
__func__, current_limit);
|
|
|
|
if (current_limit != -1) {
|
|
g_bcct_flag = 1;
|
|
|
|
if (current_limit < 70)
|
|
g_temp_CC_value = CHARGE_CURRENT_0_00_MA;
|
|
else if (current_limit < 200)
|
|
g_temp_CC_value = CHARGE_CURRENT_70_00_MA;
|
|
else if (current_limit < 300)
|
|
g_temp_CC_value = CHARGE_CURRENT_200_00_MA;
|
|
else if (current_limit < 400)
|
|
g_temp_CC_value = CHARGE_CURRENT_300_00_MA;
|
|
else if (current_limit < 450)
|
|
g_temp_CC_value = CHARGE_CURRENT_400_00_MA;
|
|
else if (current_limit < 550)
|
|
g_temp_CC_value = CHARGE_CURRENT_450_00_MA;
|
|
else if (current_limit < 650)
|
|
g_temp_CC_value = CHARGE_CURRENT_550_00_MA;
|
|
else if (current_limit < 700)
|
|
g_temp_CC_value = CHARGE_CURRENT_650_00_MA;
|
|
else if (current_limit < 800)
|
|
g_temp_CC_value = CHARGE_CURRENT_700_00_MA;
|
|
else if (current_limit < 900)
|
|
g_temp_CC_value = CHARGE_CURRENT_800_00_MA;
|
|
else if (current_limit < 1000)
|
|
g_temp_CC_value = CHARGE_CURRENT_900_00_MA;
|
|
else if (current_limit < 1100)
|
|
g_temp_CC_value = CHARGE_CURRENT_1000_00_MA;
|
|
else if (current_limit < 1200)
|
|
g_temp_CC_value = CHARGE_CURRENT_1100_00_MA;
|
|
else if (current_limit < 1300)
|
|
g_temp_CC_value = CHARGE_CURRENT_1200_00_MA;
|
|
else if (current_limit < 1400)
|
|
g_temp_CC_value = CHARGE_CURRENT_1300_00_MA;
|
|
else if (current_limit < 1500)
|
|
g_temp_CC_value = CHARGE_CURRENT_1400_00_MA;
|
|
else if (current_limit < 1600)
|
|
g_temp_CC_value = CHARGE_CURRENT_1500_00_MA;
|
|
else if (current_limit == 1600)
|
|
g_temp_CC_value = CHARGE_CURRENT_1600_00_MA;
|
|
else
|
|
g_temp_CC_value = CHARGE_CURRENT_450_00_MA;
|
|
|
|
if (BMT_status.charger_type == STANDARD_HOST)
|
|
if ((current_limit * 100) >= CHARGE_CURRENT_500_00_MA) {
|
|
g_temp_CC_value = USB_CHARGER_CURRENT;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] %s over usb spec(%d,%d)\r\n",
|
|
__func__, current_limit * 100,
|
|
g_temp_CC_value);
|
|
}
|
|
|
|
} else {
|
|
/* change to default current setting */
|
|
g_bcct_flag = 0;
|
|
}
|
|
|
|
wake_up_bat3();
|
|
|
|
return g_bcct_flag;
|
|
}
|
|
|
|
void set_bat_sw_cv_charging_current_limit(int current_limit)
|
|
{
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] %s (%d)\r\n",
|
|
__func__, current_limit);
|
|
|
|
if (current_limit <= CHARGE_CURRENT_70_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_0_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_200_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_70_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_300_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_200_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_400_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_300_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_450_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_400_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_550_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_450_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_650_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_550_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_700_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_650_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_800_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_700_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_900_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_800_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_1000_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_900_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_1100_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_1000_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_1200_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_1100_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_1300_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_1200_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_1400_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_1300_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_1500_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_1400_00_MA;
|
|
else if (current_limit <= CHARGE_CURRENT_1600_00_MA)
|
|
ulc_cv_charging_current = CHARGE_CURRENT_1500_00_MA;
|
|
else
|
|
ulc_cv_charging_current = CHARGE_CURRENT_450_00_MA;
|
|
}
|
|
|
|
void select_charging_curret(void)
|
|
{
|
|
if (g_ftm_battery_flag) {
|
|
battery_log(BAT_LOG_CRTI, "[BATTERY] FTM charging : %d\r\n",
|
|
charging_level_data[0]);
|
|
g_temp_CC_value = charging_level_data[0];
|
|
} else {
|
|
if (BMT_status.charger_type == STANDARD_HOST) {
|
|
#ifdef CONFIG_USB_IF
|
|
{
|
|
if (g_usb_state == USB_SUSPEND) {
|
|
g_temp_CC_value =
|
|
batt_cust_data
|
|
.usb_charger_current_suspend;
|
|
} else if (g_usb_state == USB_UNCONFIGURED) {
|
|
g_temp_CC_value =
|
|
batt_cust_data
|
|
.usb_charger_current_unconfigured;
|
|
} else if (g_usb_state == USB_CONFIGURED) {
|
|
g_temp_CC_value =
|
|
batt_cust_data
|
|
.usb_charger_current_configured;
|
|
} else {
|
|
g_temp_CC_value =
|
|
batt_cust_data
|
|
.usb_charger_current_unconfigured;
|
|
}
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] STANDARD_HOST CC mode charging : %d on %d state\r\n",
|
|
g_temp_CC_value, g_usb_state);
|
|
}
|
|
#else
|
|
{
|
|
g_temp_CC_value =
|
|
batt_cust_data.usb_charger_current;
|
|
}
|
|
#endif
|
|
} else if (BMT_status.charger_type == NONSTANDARD_CHARGER) {
|
|
g_temp_CC_value =
|
|
batt_cust_data.non_std_ac_charger_current;
|
|
} else if (BMT_status.charger_type == STANDARD_CHARGER) {
|
|
g_temp_CC_value = batt_cust_data.ac_charger_current;
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
if (is_ta_connect == KAL_TRUE &&
|
|
ta_vchr_tuning == KAL_TRUE)
|
|
g_temp_CC_value = CHARGE_CURRENT_1500_00_MA;
|
|
#endif
|
|
} else if (BMT_status.charger_type == CHARGING_HOST) {
|
|
g_temp_CC_value =
|
|
batt_cust_data.charging_host_charger_current;
|
|
} else if (BMT_status.charger_type == APPLE_2_1A_CHARGER) {
|
|
g_temp_CC_value =
|
|
batt_cust_data.apple_2_1a_charger_current;
|
|
} else if (BMT_status.charger_type == APPLE_1_0A_CHARGER) {
|
|
g_temp_CC_value =
|
|
batt_cust_data.apple_1_0a_charger_current;
|
|
} else if (BMT_status.charger_type == APPLE_0_5A_CHARGER) {
|
|
g_temp_CC_value =
|
|
batt_cust_data.apple_0_5a_charger_current;
|
|
} else {
|
|
g_temp_CC_value = CHARGE_CURRENT_70_00_MA;
|
|
}
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Default CC mode charging : %d\r\n",
|
|
g_temp_CC_value);
|
|
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
set_jeita_charging_current();
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static unsigned int charging_full_check(void)
|
|
{
|
|
unsigned int status = KAL_FALSE;
|
|
|
|
#if defined(POST_TIME_ENABLE)
|
|
static unsigned int post_charging_time;
|
|
|
|
if (post_charging_time >= POST_CHARGING_TIME) {
|
|
status = KAL_TRUE;
|
|
post_charging_time = 0;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery real full and disable charging on %d mA\n",
|
|
BMT_status.ICharging);
|
|
} else if (post_charging_time > 0) {
|
|
post_charging_time += BAT_TASK_PERIOD;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] post_charging_time=%d,POST_CHARGING_TIME=%d\n",
|
|
post_charging_time, POST_CHARGING_TIME);
|
|
} else if ((BMT_status.TOPOFF_charging_time > 60) &&
|
|
(BMT_status.ICharging <= charging_full_current)) {
|
|
post_charging_time = BAT_TASK_PERIOD;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Enter Post charge, post_charging_time=%d,POST_CHARGING_TIME=%d\n",
|
|
post_charging_time, POST_CHARGING_TIME);
|
|
} else {
|
|
post_charging_time = 0;
|
|
}
|
|
#else
|
|
static unsigned char full_check_count;
|
|
|
|
if (BMT_status.ICharging <= charging_full_current) {
|
|
full_check_count++;
|
|
if (full_check_count == 6) {
|
|
status = KAL_TRUE;
|
|
full_check_count = 0;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery full and disable charging on %d mA\n",
|
|
BMT_status.ICharging);
|
|
}
|
|
} else {
|
|
full_check_count = 0;
|
|
}
|
|
#endif
|
|
|
|
return status;
|
|
}
|
|
|
|
static void charging_current_calibration(void)
|
|
{
|
|
signed int bat_isense_offset;
|
|
#if 0
|
|
signed int bat_vol = battery_meter_get_battery_voltage();
|
|
signed int Vsense = battery_meter_get_VSense();
|
|
|
|
bat_isense_offset = bat_vol - Vsense;
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] bat_vol=%d, Vsense=%d, offset=%d \r\n",
|
|
bat_vol, Vsense, bat_isense_offset);
|
|
#else
|
|
bat_isense_offset = 0;
|
|
#endif
|
|
|
|
battery_meter_sync(bat_isense_offset);
|
|
}
|
|
|
|
static void pchr_sw_cv_charing_current_check(void)
|
|
{
|
|
enum kal_bool charging_enable = KAL_TRUE;
|
|
unsigned int csdac_full_flag = KAL_TRUE;
|
|
|
|
battery_charging_control(CHARGING_CMD_SET_CURRENT,
|
|
&ulc_cv_charging_current);
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
|
|
msleep(192);
|
|
|
|
battery_charging_control(CHARGING_CMD_GET_CSDAC_FALL_FLAG,
|
|
&csdac_full_flag);
|
|
|
|
if (csdac_full_flag == KAL_TRUE)
|
|
ulc_cv_charging_current =
|
|
battery_meter_get_charging_current() * 100;
|
|
/* get immedeate charging current and align to enum value */
|
|
|
|
while (csdac_full_flag == KAL_TRUE &&
|
|
ulc_cv_charging_current != CHARGE_CURRENT_0_00_MA) {
|
|
set_bat_sw_cv_charging_current_limit(ulc_cv_charging_current);
|
|
battery_charging_control(CHARGING_CMD_SET_CURRENT,
|
|
&ulc_cv_charging_current);
|
|
ulc_cv_charging_current_flag = KAL_TRUE;
|
|
|
|
msleep(192); /* large than 512 code x 0.25ms */
|
|
|
|
battery_charging_control(CHARGING_CMD_GET_CSDAC_FALL_FLAG,
|
|
&csdac_full_flag);
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Sw CV set charging current, csdac_full_flag=%d, current=%d !\n",
|
|
csdac_full_flag, ulc_cv_charging_current);
|
|
}
|
|
|
|
if (ulc_cv_charging_current == CHARGE_CURRENT_0_00_MA)
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Sw CV set charging current Error!\n");
|
|
}
|
|
|
|
static void pchr_turn_on_charging(void)
|
|
{
|
|
#if !defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
enum BATTERY_VOLTAGE_ENUM cv_voltage;
|
|
#endif
|
|
unsigned int charging_enable = KAL_TRUE;
|
|
|
|
battery_log(BAT_LOG_FULL, "[BATTERY] %s()!\r\n", __func__);
|
|
|
|
if (BMT_status.bat_charging_state == CHR_ERROR) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Charger Error, turn OFF charging !\n");
|
|
|
|
charging_enable = KAL_FALSE;
|
|
} else if ((g_platform_boot_mode == META_BOOT) ||
|
|
(g_platform_boot_mode == ADVMETA_BOOT)) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] In meta or advanced meta mode, disable charging.\n");
|
|
charging_enable = KAL_FALSE;
|
|
} else {
|
|
/*HW initialization */
|
|
battery_log(BAT_LOG_FULL, "charging_hw_init\n");
|
|
battery_charging_control(CHARGING_CMD_INIT, NULL);
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
battery_pump_express_algorithm_start();
|
|
#endif
|
|
|
|
/* Set Charging Current */
|
|
if (get_usb_current_unlimited()) {
|
|
g_temp_CC_value = batt_cust_data.ac_charger_current;
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"USB_CURRENT_UNLIMITED, use AC_CHARGER_CURRENT\n");
|
|
} else {
|
|
if (g_bcct_flag == 1) {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[BATTERY] select_charging_curret_bcct !\n");
|
|
select_charging_curret_bcct();
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[BATTERY] select_charging_current !\n");
|
|
select_charging_curret();
|
|
}
|
|
}
|
|
|
|
if (g_temp_CC_value == CHARGE_CURRENT_0_00_MA) {
|
|
charging_enable = KAL_FALSE;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] charging current is set 0mA, turn off charging !\r\n");
|
|
} else {
|
|
{
|
|
if (ulc_cv_charging_current_flag == KAL_TRUE)
|
|
battery_charging_control(
|
|
CHARGING_CMD_SET_CURRENT,
|
|
&ulc_cv_charging_current);
|
|
else
|
|
battery_charging_control(
|
|
CHARGING_CMD_SET_CURRENT,
|
|
&g_temp_CC_value);
|
|
}
|
|
|
|
/* Set CV */
|
|
#if !defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
if (batt_cust_data.high_battery_voltage_support)
|
|
cv_voltage = BATTERY_VOLT_04_350000_V;
|
|
else
|
|
cv_voltage = BATTERY_VOLT_04_200000_V;
|
|
|
|
battery_charging_control(CHARGING_CMD_SET_CV_VOLTAGE,
|
|
&cv_voltage);
|
|
#if defined(CONFIG_MTK_HAFG_20)
|
|
g_cv_voltage = cv_voltage;
|
|
#endif
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/* enable/disable charging */
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] %s(), enable =%d \r\n",
|
|
__func__, charging_enable);
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
}
|
|
|
|
unsigned int BAT_PreChargeModeAction(void)
|
|
{
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Pre-CC mode charge, timer=%d on %d !!\n\r",
|
|
BMT_status.PRE_charging_time,
|
|
BMT_status.total_charging_time);
|
|
|
|
BMT_status.PRE_charging_time += BAT_TASK_PERIOD;
|
|
BMT_status.CC_charging_time = 0;
|
|
BMT_status.TOPOFF_charging_time = 0;
|
|
BMT_status.total_charging_time += BAT_TASK_PERIOD;
|
|
|
|
select_charging_curret();
|
|
ulc_cv_charging_current = g_temp_CC_value;
|
|
ulc_cv_charging_current_flag = KAL_FALSE;
|
|
|
|
if (BMT_status.UI_SOC == 100) {
|
|
BMT_status.bat_charging_state = CHR_BATFULL;
|
|
BMT_status.bat_full = KAL_TRUE;
|
|
g_charging_full_reset_bat_meter = KAL_TRUE;
|
|
} else if (BMT_status.bat_vol > batt_cust_data.v_pre2cc_thres) {
|
|
BMT_status.bat_charging_state = CHR_CC;
|
|
}
|
|
|
|
/* defined(MTK_LINEAR_CHARGER_NO_DISCHARGE) */
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
/* no disable charging */
|
|
#else
|
|
{
|
|
enum kal_bool charging_enable = KAL_FALSE;
|
|
|
|
/*Charging 9s and discharging 1s : start */
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
msleep(1000);
|
|
}
|
|
#endif
|
|
|
|
charging_current_calibration();
|
|
pchr_turn_on_charging();
|
|
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
unsigned int BAT_ConstantCurrentModeAction(void)
|
|
{
|
|
battery_log(
|
|
BAT_LOG_CRTI, "[BATTERY] CC mode charge, timer=%d on %d !!\n\r",
|
|
BMT_status.CC_charging_time, BMT_status.total_charging_time);
|
|
|
|
BMT_status.PRE_charging_time = 0;
|
|
BMT_status.CC_charging_time += BAT_TASK_PERIOD;
|
|
BMT_status.TOPOFF_charging_time = 0;
|
|
BMT_status.total_charging_time += BAT_TASK_PERIOD;
|
|
|
|
ulc_cv_charging_current_flag = KAL_FALSE;
|
|
ulc_cv_charging_current = g_temp_CC_value;
|
|
|
|
if (BMT_status.bat_vol > v_cc2topoff_threshold)
|
|
BMT_status.bat_charging_state = CHR_TOP_OFF;
|
|
|
|
/* defined(MTK_LINEAR_CHARGER_NO_DISCHARGE) */
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
/* no disable charging#else */
|
|
#else
|
|
{
|
|
enum kal_bool charging_enable = KAL_FALSE;
|
|
|
|
/* Charging 9s and discharging 1s : start */
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
msleep(1000);
|
|
}
|
|
#endif
|
|
|
|
charging_current_calibration();
|
|
|
|
pchr_turn_on_charging();
|
|
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
unsigned int BAT_TopOffModeAction(void)
|
|
{
|
|
unsigned int charging_enable = KAL_FALSE;
|
|
unsigned int cv_voltage;
|
|
|
|
if (batt_cust_data.high_battery_voltage_support)
|
|
cv_voltage = 4350;
|
|
else
|
|
cv_voltage = 4200;
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Top Off mode charge, timer=%d on %d !!\n\r",
|
|
BMT_status.TOPOFF_charging_time,
|
|
BMT_status.total_charging_time);
|
|
|
|
BMT_status.PRE_charging_time = 0;
|
|
BMT_status.CC_charging_time = 0;
|
|
BMT_status.TOPOFF_charging_time += BAT_TASK_PERIOD;
|
|
BMT_status.total_charging_time += BAT_TASK_PERIOD;
|
|
|
|
/* CV - 0.08V */
|
|
if (BMT_status.bat_vol > (cv_voltage - CV_CHECK_DELAT_FOR_BANDGAP))
|
|
pchr_sw_cv_charing_current_check();
|
|
pchr_turn_on_charging();
|
|
|
|
if ((BMT_status.TOPOFF_charging_time >= MAX_CV_CHARGING_TIME) ||
|
|
(charging_full_check() == KAL_TRUE)) {
|
|
BMT_status.bat_charging_state = CHR_BATFULL;
|
|
BMT_status.bat_full = KAL_TRUE;
|
|
g_charging_full_reset_bat_meter = KAL_TRUE;
|
|
|
|
/* Disable charging */
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
}
|
|
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
unsigned int BAT_BatteryFullAction(void)
|
|
{
|
|
unsigned int charging_enable = KAL_FALSE;
|
|
|
|
battery_log(BAT_LOG_CRTI, "[BATTERY] Battery full !!\n\r");
|
|
|
|
BMT_status.bat_full = KAL_TRUE;
|
|
BMT_status.total_charging_time = 0;
|
|
BMT_status.PRE_charging_time = 0;
|
|
BMT_status.CC_charging_time = 0;
|
|
BMT_status.TOPOFF_charging_time = 0;
|
|
BMT_status.POSTFULL_charging_time = 0;
|
|
BMT_status.bat_in_recharging_state = KAL_FALSE;
|
|
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
if (BMT_status.bat_vol < g_jeita_recharging_voltage)
|
|
#else
|
|
if (BMT_status.bat_vol < batt_cust_data.recharging_voltage)
|
|
#endif
|
|
{
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Enter Re-charging!! , vbat=(%d)\n\r",
|
|
BMT_status.bat_vol);
|
|
|
|
BMT_status.bat_in_recharging_state = KAL_TRUE;
|
|
BMT_status.bat_charging_state = CHR_CC;
|
|
ulc_cv_charging_current = g_temp_CC_value;
|
|
ulc_cv_charging_current_flag = KAL_FALSE;
|
|
}
|
|
|
|
/* Disable charging */
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
unsigned int BAT_BatteryHoldAction(void)
|
|
{
|
|
unsigned int charging_enable;
|
|
|
|
battery_log(BAT_LOG_CRTI, "[BATTERY] Hold mode !!\n\r");
|
|
|
|
if (BMT_status.bat_vol < batt_cust_data.talking_recharge_voltage ||
|
|
g_call_state == CALL_IDLE) {
|
|
BMT_status.bat_charging_state = CHR_CC;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Exit Hold mode and Enter CC mode !!\n\r");
|
|
}
|
|
|
|
/* Disable charger */
|
|
charging_enable = KAL_FALSE;
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
unsigned int BAT_BatteryStatusFailAction(void)
|
|
{
|
|
unsigned int charging_enable;
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] BAD Battery status... Charging Stop !!\n\r");
|
|
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
if ((g_temp_status == TEMP_ABOVE_POS_60) ||
|
|
(g_temp_status == TEMP_BELOW_NEG_10))
|
|
temp_error_recovery_chr_flag = KAL_FALSE;
|
|
|
|
if ((temp_error_recovery_chr_flag == KAL_FALSE) &&
|
|
(g_temp_status != TEMP_ABOVE_POS_60) &&
|
|
(g_temp_status != TEMP_BELOW_NEG_10)) {
|
|
temp_error_recovery_chr_flag = KAL_TRUE;
|
|
BMT_status.bat_charging_state = CHR_PRE;
|
|
}
|
|
#endif
|
|
|
|
BMT_status.total_charging_time = 0;
|
|
BMT_status.PRE_charging_time = 0;
|
|
BMT_status.CC_charging_time = 0;
|
|
BMT_status.TOPOFF_charging_time = 0;
|
|
BMT_status.POSTFULL_charging_time = 0;
|
|
|
|
/* Disable charger */
|
|
charging_enable = KAL_FALSE;
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
void mt_battery_charging_algorithm(void)
|
|
{
|
|
__init_charging_varaibles();
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
battery_pump_express_charger_check();
|
|
#endif
|
|
switch (BMT_status.bat_charging_state) {
|
|
case CHR_PRE:
|
|
BAT_PreChargeModeAction();
|
|
break;
|
|
|
|
case CHR_CC:
|
|
BAT_ConstantCurrentModeAction();
|
|
break;
|
|
|
|
case CHR_TOP_OFF:
|
|
BAT_TopOffModeAction();
|
|
break;
|
|
|
|
case CHR_BATFULL:
|
|
BAT_BatteryFullAction();
|
|
break;
|
|
|
|
case CHR_HOLD:
|
|
BAT_BatteryHoldAction();
|
|
break;
|
|
|
|
case CHR_ERROR:
|
|
BAT_BatteryStatusFailAction();
|
|
break;
|
|
}
|
|
|
|
battery_charging_control(CHARGING_CMD_DUMP_REGISTER, NULL);
|
|
}
|