kernel_samsung_a34x-permissive/arch/powerpc/boot/dts/fsl/sbc8641d.dts
2024-04-28 15:51:13 +02:00

181 lines
3.7 KiB
Plaintext

/*
* SBC8641D Device Tree Source
*
* Copyright 2008 Wind River Systems Inc.
*
* Paul Gortmaker (see MAINTAINERS for contact information)
*
* Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc8641si-pre.dtsi"
/ {
model = "SBC8641D";
compatible = "wind,sbc8641";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512M at 0x0
};
lbc: localbus@f8005000 {
reg = <0xf8005000 0x1000>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xf0000000 0x00010000 // 64KB EEPROM
2 0 0xf1000000 0x00100000 // EPLD (1MB)
3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3)
4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4)
6 0 0xf4000000 0x00100000 // LCD display (1MB)
7 0 0xe8000000 0x04000000>; // 64MB OneNAND
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x01000000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "dtb";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@300000 {
label = "kernel";
reg = <0x00100000 0x00400000>;
read-only;
};
partition@400000 {
label = "fs";
reg = <0x00500000 0x00a00000>;
};
partition@700000 {
label = "firmware";
reg = <0x00f00000 0x00100000>;
read-only;
};
};
epld@2,0 {
compatible = "wrs,epld-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <2 0 0x100000>;
ranges = <0 0 5 0 1 // User switches
1 0 5 1 1 // Board ID/Rev
3 0 5 3 1>; // LEDs
};
};
soc: soc@f8000000 {
ranges = <0x00000000 0xf8000000 0x00100000>;
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
mdio@24520 {
phy0: ethernet-phy@1f {
reg = <0x1f>;
};
phy1: ethernet-phy@0 {
reg = <0>;
};
phy2: ethernet-phy@1 {
reg = <1>;
};
phy3: ethernet-phy@2 {
reg = <2>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
pci0: pcie@f8008000 {
reg = <0xf8008000 0x1000>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
interrupt-map-mask = <0xff00 0 0 7>;
pcie@0 {
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00100000>;
};
};
pci1: pcie@f8009000 {
reg = <0xf8009000 0x1000>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
pcie@0 {
ranges = <0x02000000 0x0 0xa0000000
0x02000000 0x0 0xa0000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00100000>;
};
};
};
/include/ "mpc8641si-post.dtsi"