82 lines
3.3 KiB
C
82 lines
3.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* include/asm/sunbpp.h
|
|
*/
|
|
|
|
#ifndef _ASM_SPARC_SUNBPP_H
|
|
#define _ASM_SPARC_SUNBPP_H
|
|
|
|
struct bpp_regs {
|
|
/* DMA registers */
|
|
__volatile__ __u32 p_csr; /* DMA Control/Status Register */
|
|
__volatile__ __u32 p_addr; /* Address Register */
|
|
__volatile__ __u32 p_bcnt; /* Byte Count Register */
|
|
__volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */
|
|
/* Parallel Port registers */
|
|
__volatile__ __u16 p_hcr; /* Hardware Configuration Register */
|
|
__volatile__ __u16 p_ocr; /* Operation Configuration Register */
|
|
__volatile__ __u8 p_dr; /* Parallel Data Register */
|
|
__volatile__ __u8 p_tcr; /* Transfer Control Register */
|
|
__volatile__ __u8 p_or; /* Output Register */
|
|
__volatile__ __u8 p_ir; /* Input Register */
|
|
__volatile__ __u16 p_icr; /* Interrupt Control Register */
|
|
};
|
|
|
|
/* P_HCR. Time is in increments of SBus clock. */
|
|
#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
|
|
#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
|
|
#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
|
|
|
|
/* P_OCR. */
|
|
#define P_OCR_MEM_CLR 0x8000
|
|
#define P_OCR_DATA_SRC 0x4000 /* ) */
|
|
#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
|
|
#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
|
|
#define P_OCR_ACK_DSEL 0x0800 /* ) */
|
|
#define P_OCR_EN_DIAG 0x0400
|
|
#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
|
|
#define P_OCR_ACK_OP 0x0100 /* Ack operation */
|
|
#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
|
|
#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
|
|
#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
|
|
#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
|
|
|
|
/* P_TCR */
|
|
#define P_TCR_DIR 0x08
|
|
#define P_TCR_BUSY 0x04
|
|
#define P_TCR_ACK 0x02
|
|
#define P_TCR_DS 0x01 /* Strobe */
|
|
|
|
/* P_OR */
|
|
#define P_OR_V3 0x20 /* ) */
|
|
#define P_OR_V2 0x10 /* ) on Zebra only */
|
|
#define P_OR_V1 0x08 /* ) */
|
|
#define P_OR_INIT 0x04
|
|
#define P_OR_AFXN 0x02 /* Auto Feed */
|
|
#define P_OR_SLCT_IN 0x01
|
|
|
|
/* P_IR */
|
|
#define P_IR_PE 0x04
|
|
#define P_IR_SLCT 0x02
|
|
#define P_IR_ERR 0x01
|
|
|
|
/* P_ICR */
|
|
#define P_DS_IRQ 0x8000 /* RW1 */
|
|
#define P_ACK_IRQ 0x4000 /* RW1 */
|
|
#define P_BUSY_IRQ 0x2000 /* RW1 */
|
|
#define P_PE_IRQ 0x1000 /* RW1 */
|
|
#define P_SLCT_IRQ 0x0800 /* RW1 */
|
|
#define P_ERR_IRQ 0x0400 /* RW1 */
|
|
#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
|
|
#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
|
|
#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
|
|
#define P_BUSY_IRQ_EN 0x0040 /* RW */
|
|
#define P_PE_IRP 0x0020 /* RW 1= rising edge */
|
|
#define P_PE_IRQ_EN 0x0010 /* RW */
|
|
#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
|
|
#define P_SLCT_IRQ_EN 0x0004 /* RW */
|
|
#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
|
|
#define P_ERR_IRQ_EN 0x0001 /* RW */
|
|
|
|
#endif /* !(_ASM_SPARC_SUNBPP_H) */
|