6db4831e98
Android 14
2214 lines
62 KiB
C
2214 lines
62 KiB
C
/*
|
|
* sm5451_charger.c - SM5451 Charger device driver for SAMSUNG platform
|
|
*
|
|
* Copyright (C) 2022 SiliconMitus Co.Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/power_supply.h>
|
|
#if defined(CONFIG_OF)
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pm_runtime.h>
|
|
#endif /* CONFIG_OF */
|
|
#if IS_ENABLED(CONFIG_BATTERY_SAMSUNG)
|
|
#include "../../common/sec_charging_common.h"
|
|
#include "../../common/sec_direct_charger.h"
|
|
#endif
|
|
#include "sm5451_charger.h"
|
|
#if IS_ENABLED(CONFIG_SEC_ABC)
|
|
#include <linux/sti/abc_common.h>
|
|
#endif
|
|
|
|
#define SM5451_DC_VERSION "WD1"
|
|
|
|
static u32 SM5451_freq_val[] = {
|
|
200, 375, 500, 750, 1000, 1250, 1500
|
|
};
|
|
|
|
static int sm5451_read_reg(struct sm5451_charger *sm5451, u8 reg, u8 *dest)
|
|
{
|
|
int cnt, ret;
|
|
|
|
for (cnt = 0; cnt < 3; ++cnt) {
|
|
ret = i2c_smbus_read_byte_data(sm5451->i2c, reg);
|
|
if (ret < 0)
|
|
dev_err(sm5451->dev, "%s: fail to i2c_read(ret=%d)\n", __func__, ret);
|
|
else
|
|
break;
|
|
|
|
if (cnt == 0)
|
|
msleep(30);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
#if IS_ENABLED(CONFIG_SEC_ABC) && !defined(CONFIG_SEC_FACTORY)
|
|
sec_abc_send_event("MODULE=battery@WARN=dc_i2c_fail");
|
|
#endif
|
|
return ret;
|
|
} else {
|
|
*dest = (ret & 0xff);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sm5451_bulk_read(struct sm5451_charger *sm5451, u8 reg, int count, u8 *buf)
|
|
{
|
|
int cnt, ret;
|
|
|
|
for (cnt = 0; cnt < 3; ++cnt) {
|
|
ret = i2c_smbus_read_i2c_block_data(sm5451->i2c, reg, count, buf);
|
|
if (ret < 0)
|
|
dev_err(sm5451->dev, "%s: fail to i2c_bulk_read(ret=%d)\n", __func__, ret);
|
|
else
|
|
break;
|
|
|
|
if (cnt == 0)
|
|
msleep(30);
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_SEC_ABC) && !defined(CONFIG_SEC_FACTORY)
|
|
if (ret < 0)
|
|
sec_abc_send_event("MODULE=battery@WARN=dc_i2c_fail");
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sm5451_write_reg(struct sm5451_charger *sm5451, u8 reg, u8 value)
|
|
{
|
|
int cnt, ret;
|
|
|
|
for (cnt = 0; cnt < 3; ++cnt) {
|
|
ret = i2c_smbus_write_byte_data(sm5451->i2c, reg, value);
|
|
if (ret < 0)
|
|
dev_err(sm5451->dev, "%s: fail to i2c_write(ret=%d)\n", __func__, ret);
|
|
else
|
|
break;
|
|
|
|
if (cnt == 0)
|
|
msleep(30);
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_SEC_ABC) && !defined(CONFIG_SEC_FACTORY)
|
|
if (ret < 0)
|
|
sec_abc_send_event("MODULE=battery@WARN=dc_i2c_fail");
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sm5451_update_reg(struct sm5451_charger *sm5451, u8 reg,
|
|
u8 val, u8 mask, u8 pos)
|
|
{
|
|
int ret;
|
|
u8 old_val;
|
|
|
|
mutex_lock(&sm5451->i2c_lock);
|
|
|
|
ret = sm5451_read_reg(sm5451, reg, &old_val);
|
|
if (ret == 0) {
|
|
u8 new_val = (val & mask) << pos | (old_val & ~(mask << pos));
|
|
|
|
ret = sm5451_write_reg(sm5451, reg, new_val);
|
|
}
|
|
|
|
mutex_unlock(&sm5451->i2c_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u8 sm5451_get_flag_status(struct sm5451_charger *sm5451, u8 flag_addr)
|
|
{
|
|
u8 reg;
|
|
|
|
/* read twice to get correct value */
|
|
mutex_lock(&sm5451->i2c_lock);
|
|
sm5451_read_reg(sm5451, flag_addr, ®);
|
|
sm5451_read_reg(sm5451, flag_addr, ®);
|
|
mutex_unlock(&sm5451->i2c_lock);
|
|
|
|
return reg;
|
|
}
|
|
|
|
static u32 sm5451_get_vbatreg(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 reg;
|
|
u32 vbatovp, offset;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_VBAT_OVP, ®);
|
|
vbatovp = 4000 + ((reg & 0x7F) * 10);
|
|
sm5451_read_reg(sm5451, SM5451_REG_REG1, ®);
|
|
offset = ((reg & 0x3) * 50) + 50;
|
|
|
|
dev_info(sm5451->dev, "%s: vbatovp=%d, offset=%d\n",
|
|
__func__, vbatovp, offset);
|
|
|
|
return (vbatovp - offset);
|
|
}
|
|
|
|
static int sm5451_set_vbatreg(struct sm5451_charger *sm5451, u32 vbatreg)
|
|
{
|
|
u8 reg;
|
|
u32 vbatovp, offset;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_REG1, ®);
|
|
offset = ((reg & 0x3) * 50) + 50;
|
|
vbatovp = vbatreg + offset;
|
|
if (vbatovp < 4000)
|
|
reg = 0;
|
|
else
|
|
reg = (vbatovp - 4000) / 10;
|
|
|
|
dev_info(sm5451->dev, "%s: vbatovp=%d, offset=%d reg=0x%x\n",
|
|
__func__, vbatovp, offset, reg);
|
|
|
|
return sm5451_update_reg(sm5451, SM5451_REG_VBAT_OVP, reg, 0x7F, 0);
|
|
}
|
|
|
|
static u32 sm5451_get_ibuslim(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 reg;
|
|
u32 ibusocp, offset;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_IBUS_PROT, ®);
|
|
ibusocp = 500 + ((reg & 0x3F) * 100);
|
|
sm5451_read_reg(sm5451, SM5451_REG_CNTL5, ®);
|
|
offset = ((reg & 0x3) * 100) + 100;
|
|
|
|
dev_info(sm5451->dev, "%s: ibusocp=%d, offset=%d\n",
|
|
__func__, ibusocp, offset);
|
|
|
|
return ibusocp - offset;
|
|
}
|
|
|
|
static int sm5451_set_ibuslim(struct sm5451_charger *sm5451, u32 ibuslim)
|
|
{
|
|
u8 reg;
|
|
u32 ibusocp, offset;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_CNTL5, ®);
|
|
offset = ((reg & 0x3) * 100) + 100;
|
|
ibusocp = ibuslim + offset;
|
|
reg = (ibusocp - 500) / 100;
|
|
|
|
dev_info(sm5451->dev, "%s: ibusocp=%d, offset=%d reg=0x%x\n",
|
|
__func__, ibusocp, offset, reg);
|
|
|
|
return sm5451_update_reg(sm5451, SM5451_REG_IBUS_PROT, reg, 0x3F, 0);
|
|
}
|
|
|
|
static int sm5451_set_freq(struct sm5451_charger *sm5451, u8 freq)
|
|
{
|
|
return sm5451_update_reg(sm5451, SM5451_REG_CNTL2, freq, 0x7, 5);
|
|
}
|
|
|
|
static int sm5451_set_op_mode(struct sm5451_charger *sm5451, u8 op_mode)
|
|
{
|
|
return sm5451_update_reg(sm5451, SM5451_REG_CNTL1, op_mode, 0x7, 4);
|
|
}
|
|
|
|
static u8 sm5451_get_op_mode(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 reg;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_CNTL1, ®);
|
|
|
|
return (reg >> 4) & 0x7;
|
|
}
|
|
|
|
static int sm5451_set_wdt_timer(struct sm5451_charger *sm5451, u8 tmr)
|
|
{
|
|
return sm5451_update_reg(sm5451, SM5451_REG_CNTL1, tmr, 0x7, 0);
|
|
}
|
|
|
|
static u8 sm5451_get_wdt_timer(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 reg = 0x0;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_CNTL1, ®);
|
|
|
|
return reg & 0x7;
|
|
}
|
|
|
|
static int sm5451_kick_wdt(struct sm5451_charger *sm5451)
|
|
{
|
|
return sm5451_update_reg(sm5451, SM5451_REG_CNTL2, 0x1, 0x1, 0);
|
|
}
|
|
|
|
static int sm5451_set_adcmode(struct sm5451_charger *sm5451, u8 mode)
|
|
{
|
|
return sm5451_update_reg(sm5451, SM5451_REG_ADC_CNTL, mode, 0x1, 6);
|
|
}
|
|
|
|
static int sm5451_enable_adc(struct sm5451_charger *sm5451, bool enable)
|
|
{
|
|
return sm5451_update_reg(sm5451, SM5451_REG_ADC_CNTL, enable, 0x1, 7);
|
|
}
|
|
|
|
static int sm5451_enable_adc_oneshot(struct sm5451_charger *sm5451, u8 enable)
|
|
{
|
|
int ret, cnt;
|
|
u8 reg;
|
|
|
|
if (enable) {
|
|
for (cnt = 0; cnt < 3; ++cnt) {
|
|
ret = sm5451_write_reg(sm5451, SM5451_REG_ADC_CNTL, 0xC0);
|
|
/* ADC update time */
|
|
msleep(25);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG3, ®);
|
|
if ((reg & SM5451_FLAG3_ADCDONE) == 0)
|
|
dev_info(sm5451->dev, "%s: fail to adc done(FLAG3=0x%02X)\n", __func__, reg);
|
|
else
|
|
break;
|
|
}
|
|
} else {
|
|
msleep(30);
|
|
ret = sm5451_write_reg(sm5451, SM5451_REG_ADC_CNTL, 0x0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sm5451_get_enadc(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 reg = 0x0;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_ADC_CNTL, ®);
|
|
|
|
return (reg >> 7) & 0x1;
|
|
}
|
|
|
|
static int sm5451_sw_reset(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 i, reg;
|
|
|
|
sm5451_update_reg(sm5451, SM5451_REG_CNTL1, 1, 0x1, 7); /* Do SW Reset */
|
|
|
|
for (i = 0; i < 0xff; ++i) {
|
|
usleep_range(1000, 2000);
|
|
sm5451_read_reg(sm5451, SM5451_REG_CNTL1, ®);
|
|
if (!((reg >> 7) & 0x1))
|
|
break;
|
|
}
|
|
|
|
if (i == 0xff) {
|
|
dev_err(sm5451->dev, "%s: didn't clear reset bit\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u8 sm5451_get_reverse_boost_ocp(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 reg, op_mode;
|
|
u8 revbsocp = 0;
|
|
|
|
op_mode = sm5451_get_op_mode(sm5451);
|
|
if (op_mode == OP_MODE_INIT) {
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG4, ®);
|
|
dev_info(sm5451->dev, "%s: FLAG4=0x%x\n", __func__, reg);
|
|
if (reg & SM5451_FLAG4_IBUSOCP_RVS) {
|
|
revbsocp = 1;
|
|
dev_err(sm5451->dev, "%s: detect reverse_boost_ocp\n", __func__);
|
|
}
|
|
}
|
|
return revbsocp;
|
|
}
|
|
|
|
static void sm5451_init_reg_param(struct sm5451_charger *sm5451)
|
|
{
|
|
sm5451_set_wdt_timer(sm5451, WDT_TIMER_S_40);
|
|
sm5451_set_freq(sm5451, sm5451->pdata->freq); /* FREQ : 500kHz */
|
|
sm5451_update_reg(sm5451, SM5451_REG_IBUS_PROT, 0x1, 0x1, 7); /* IBUSUCP = on */
|
|
sm5451_write_reg(sm5451, SM5451_REG_VBUSOVP, 0xC6); /* VBUS_OVP=11V */
|
|
sm5451_write_reg(sm5451, SM5451_REG_IBAT_OCP, 0x7C); /* IBATOCP = off */
|
|
sm5451_write_reg(sm5451, SM5451_REG_CNTL3, 0xA3); /* RLTVOVP = off, RLTVUVP = 1.01x */
|
|
sm5451_write_reg(sm5451, SM5451_REG_CNTL4, 0x00); /* VDSQRBP = off */
|
|
sm5451_write_reg(sm5451, SM5451_REG_IBATOCP_DG, 0x88); /* Deglitch for IBATOCP & IBUSOCP = 8ms */
|
|
sm5451_write_reg(sm5451, SM5451_REG_VDSQRB_DG, 0x05); /* Deglitch for VDSQRB = 200ms */
|
|
sm5451_write_reg(sm5451, SM5451_REG_CNTL5, 0x3F); /* IBUSOCP_RVS = on, threshold = 4.5A */
|
|
if (sm5451->pdata->en_vbatreg)
|
|
sm5451_write_reg(sm5451, SM5451_REG_REG1, 0x07); /* IBATREG = off, VBATREG = VBATOVP - 200mV */
|
|
else
|
|
sm5451_write_reg(sm5451, SM5451_REG_REG1, 0x03); /* IBATOCP & IBATREG & VBATREG = off */
|
|
|
|
if (sm5451->pdata->x2bat_mode) {
|
|
if (sm5451->chip_id == SM5451_SUB)
|
|
sm5451_write_reg(sm5451, SM5451_REG_REG1, 0x07); /* IBATREG = off, VBATREG = VBATOVP - 200mV */
|
|
} else {
|
|
if (sm5451->chip_id == SM5451_SUB)
|
|
sm5451_update_reg(sm5451, SM5451_REG_IBUS_PROT, 0x1, 0x1, 6); /* IBUSUCP = 250mA */
|
|
}
|
|
}
|
|
|
|
static struct sm_dc_info *select_sm_dc_info(struct sm5451_charger *sm5451)
|
|
{
|
|
if (sm5451->pdata->x2bat_mode)
|
|
return sm5451->x2bat_dc;
|
|
else
|
|
return sm5451->pps_dc;
|
|
}
|
|
|
|
static int sm5451_get_vnow(struct sm5451_charger *sm5451)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
union power_supply_propval value = {0, };
|
|
int ret;
|
|
|
|
if (sm5451->pdata->en_vbatreg)
|
|
return 0;
|
|
|
|
value.intval = SEC_BATTERY_VOLTAGE_MV;
|
|
ret = psy_do_property(sm5451->pdata->battery.fuelgauge_name, get,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW, value);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: cannot get vnow from fg\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
pr_info("%s %s: vnow=%dmV, target_vbat=%dmV\n", sm_dc->name,
|
|
__func__, value.intval, sm_dc->target_vbat);
|
|
|
|
return value.intval;
|
|
}
|
|
|
|
static int sm5451_convert_adc(struct sm5451_charger *sm5451, u8 index)
|
|
{
|
|
u8 regs[4] = {0x0, };
|
|
u8 ret = 0x0;
|
|
int adc, cnt;
|
|
|
|
/* User binary only check ADC block during CHG-ON status and Factory binary/Dual Battery feature check ADC block all the time */
|
|
#if !defined(CONFIG_SEC_FACTORY) && !defined(CONFIG_DUAL_BATTERY)
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
|
|
if (sm_dc_get_current_state(sm_dc) < SM_DC_CHECK_VBAT
|
|
&& !(sm5451->rev_boost) && (sm_dc->chip_id != SM5451_SUB) && !(sm5451->force_adc_on)) {
|
|
/* Didn't worked ADC block during on CHG-OFF status */
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
for (cnt = 0; cnt < 2; ++cnt) {
|
|
if (sm5451_get_enadc(sm5451) == 0)
|
|
sm5451_enable_adc_oneshot(sm5451, 1);
|
|
|
|
switch (index) {
|
|
case SM5451_ADC_THEM: /* unit - mV */
|
|
sm5451_bulk_read(sm5451, SM5451_REG_THEM_ADC_H, 2, regs);
|
|
adc = (((int)(regs[0] & 0x0F) << 8) + regs[1] + 1) >> 1;
|
|
break;
|
|
case SM5451_ADC_TDIE: /* unit - C */
|
|
sm5451_read_reg(sm5451, SM5451_REG_TDIE_ADC, regs);
|
|
adc = -40 + regs[0];
|
|
break;
|
|
case SM5451_ADC_VBUS:
|
|
sm5451_bulk_read(sm5451, SM5451_REG_VBUS_ADC_H, 2, regs);
|
|
adc = (((int)(regs[0] & 0x0F) << 8) + regs[1]) * 4;
|
|
break;
|
|
case SM5451_ADC_IBUS:
|
|
sm5451_bulk_read(sm5451, SM5451_REG_IBUS_ADC_H, 2, regs);
|
|
adc = (((int)(regs[0] & 0x0F) << 8) + regs[1]) * 2;
|
|
break;
|
|
case SM5451_ADC_VBAT:
|
|
sm5451_bulk_read(sm5451, SM5451_REG_VBAT_ADC_H, 2, regs);
|
|
adc = (((int)(regs[0] & 0x0F) << 8) + regs[1]) * 2;
|
|
break;
|
|
case SM5451_ADC_IBAT:
|
|
sm5451_bulk_read(sm5451, SM5451_REG_IBAT_ADC_H, 2, regs);
|
|
adc = (((int)(regs[0] & 0x0F) << 8) + regs[1]) * 2;
|
|
break;
|
|
default:
|
|
adc = 0;
|
|
}
|
|
|
|
/* prevent for reset of register */
|
|
ret = sm5451_get_wdt_timer(sm5451);
|
|
if (ret != WDT_TIMER_S_40) {
|
|
dev_err(sm5451->dev, "%s: detected REG Reset condition(ret=0x%x)\n", __func__, ret);
|
|
sm5451_init_reg_param(sm5451);
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
dev_info(sm5451->dev, "%s: index(%d)=[0x%02X,0x%02X], adc=%d\n",
|
|
__func__, index, regs[0], regs[1], adc);
|
|
|
|
return adc;
|
|
}
|
|
|
|
static int sm5451_set_adc_mode(struct i2c_client *i2c, u8 mode)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
|
|
switch (mode) {
|
|
case SM_DC_ADC_MODE_ONESHOT:
|
|
/* covered by continuous mode */
|
|
case SM_DC_ADC_MODE_CONTINUOUS:
|
|
/* SM5451 continuous mode reflash time : 200ms */
|
|
sm5451_set_adcmode(sm5451, 0);
|
|
sm5451_enable_adc(sm5451, 1);
|
|
break;
|
|
case SM_DC_ADC_MODE_OFF:
|
|
default:
|
|
sm5451_set_adcmode(sm5451, 0);
|
|
sm5451_enable_adc(sm5451, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sm5451_print_regmap(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 print_reg_num, regs[64] = {0x0, };
|
|
char temp_buf[128] = {0,};
|
|
char reg_addr[16] = {0x0C, 0x0E, 0x10, 0x11, 0x60, 0x61, 0x62, 0x64, };
|
|
u8 reg_data;
|
|
int i;
|
|
|
|
print_reg_num = SM5451_REG_FLAG1 - SM5451_REG_CNTL1;
|
|
sm5451_bulk_read(sm5451, SM5451_REG_CNTL1, print_reg_num, regs);
|
|
for (i = 0; i < print_reg_num; ++i)
|
|
sprintf(temp_buf+strlen(temp_buf), "0x%02X[0x%02X],", SM5451_REG_CNTL1 + i, regs[i]);
|
|
|
|
pr_info("sm5451-charger: regmap: %s\n", temp_buf);
|
|
memset(temp_buf, 0x0, sizeof(temp_buf));
|
|
|
|
print_reg_num = 8;
|
|
for (i = 0; i < print_reg_num; ++i) {
|
|
sm5451_read_reg(sm5451, reg_addr[i], ®_data);
|
|
sprintf(temp_buf+strlen(temp_buf), "0x%02X[0x%02X],", reg_addr[i], reg_data);
|
|
}
|
|
pr_info("sm5451-charger: regmap: %s\n", temp_buf);
|
|
memset(temp_buf, 0x0, sizeof(temp_buf));
|
|
}
|
|
|
|
static int sm5451_reverse_boost_enable(struct sm5451_charger *sm5451, bool enable)
|
|
{
|
|
u8 i, flag1, flag2, flag3, flag4;
|
|
|
|
if (enable && !sm5451->rev_boost) {
|
|
for (i = 0; i < 2; ++i) {
|
|
flag3 = sm5451_get_flag_status(sm5451, SM5451_REG_FLAG3);
|
|
dev_info(sm5451->dev, "%s: FLAG3:0x%x i=%d\n", __func__, flag3, i);
|
|
if (flag3 & (SM5451_FLAG3_VBUSUVLO | SM5451_FLAG3_VBUSPOK))
|
|
msleep(20);
|
|
else
|
|
break;
|
|
}
|
|
|
|
sm5451_set_op_mode(sm5451, OP_MODE_REV_BOOST);
|
|
for (i = 0; i < 12; ++i) {
|
|
usleep_range(10000, 11000);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG1, &flag1);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG2, &flag2);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG3, &flag3);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG4, &flag4);
|
|
dev_info(sm5451->dev, "%s: FLAG:0x%x:0x%x:0x%x:0x%x i=%d\n",
|
|
__func__, flag1, flag2, flag3, flag4, i);
|
|
if (flag4 & SM5451_FLAG4_RVSRDY)
|
|
break;
|
|
}
|
|
if (i == 12) {
|
|
dev_err(sm5451->dev, "%s: fail to reverse boost enable\n", __func__);
|
|
sm5451_set_op_mode(sm5451, OP_MODE_INIT);
|
|
sm5451->rev_boost = false;
|
|
return -EINVAL;
|
|
}
|
|
sm5451_set_adc_mode(sm5451->i2c, SM_DC_ADC_MODE_CONTINUOUS);
|
|
dev_info(sm5451->dev, "%s: ON\n", __func__);
|
|
} else if (!enable) {
|
|
sm5451_set_op_mode(sm5451, OP_MODE_INIT);
|
|
sm5451_set_adc_mode(sm5451->i2c, SM_DC_ADC_MODE_OFF);
|
|
dev_info(sm5451->dev, "%s: OFF\n", __func__);
|
|
}
|
|
sm5451->rev_boost = enable;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool sm5451_check_charging_enable(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 reg;
|
|
|
|
reg = sm5451_get_op_mode(sm5451);
|
|
if (reg == OP_MODE_FW_BOOST || reg == OP_MODE_FW_BYPASS)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static int sm5451_prechg_enable(struct sm5451_charger *sm5451, bool enable)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
u8 reg, i;
|
|
|
|
if (enable) {
|
|
if (state > SM_DC_EOC || sm5451_check_charging_enable(sm5451)) {
|
|
dev_info(sm5451->dev, "%s: charging state (state=%d)\n", __func__, state);
|
|
} else {
|
|
dev_info(sm5451->dev, "%s: ON\n", __func__);
|
|
for (i = 0; i < 2; ++i) {
|
|
sm5451_write_reg(sm5451, SM5451_REG_PRECHG_MODE, 0xEA);
|
|
sm5451_write_reg(sm5451, SM5451_REG_PRECHG_MODE, 0xAE);
|
|
sm5451_write_reg(sm5451, SM5451_REG_CTRL_STM_0, 0xB0);
|
|
sm5451_write_reg(sm5451, SM5451_REG_CTRL_STM_3, 0x80);
|
|
sm5451_write_reg(sm5451, SM5451_REG_CTRL_STM_5, 0x08);
|
|
sm5451_write_reg(sm5451, SM5451_REG_CTRL_STM_2, 0x08);
|
|
sm5451_read_reg(sm5451, SM5451_REG_CTRL_STM_0, ®);
|
|
if (reg != 0xB0)
|
|
sm5451_write_reg(sm5451, SM5451_REG_PRECHG_MODE, 0x00);
|
|
else
|
|
break;
|
|
dev_info(sm5451->dev, "%s: fail to pre-charging\n", __func__);
|
|
}
|
|
usleep_range(10000, 11000);
|
|
}
|
|
} else {
|
|
dev_info(sm5451->dev, "%s: OFF\n", __func__);
|
|
sm5451_write_reg(sm5451, SM5451_REG_PRECHG_MODE, 0x00);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_start_charging(struct sm5451_charger *sm5451)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
struct power_supply *psy_dc_sub = NULL;
|
|
struct sm5451_charger *sm5451_sub = NULL;
|
|
int ret;
|
|
|
|
if (sm5451->cable_online < 1) {
|
|
dev_err(sm5451->dev, "%s: can't detect valid cable connection(online=%d)\n",
|
|
__func__, sm5451->cable_online);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Check dc mode */
|
|
if (sm_dc->chip_id != SM5451_SUB) {
|
|
psy_dc_sub = power_supply_get_by_name("sm5451-charger-sub");
|
|
if (!psy_dc_sub) {
|
|
sm_dc->i2c_sub = NULL;
|
|
dev_info(sm5451->dev, "%s: start single dc mode\n", __func__);
|
|
} else {
|
|
sm5451_sub = power_supply_get_drvdata(psy_dc_sub);
|
|
sm_dc->i2c_sub = sm5451_sub->i2c;
|
|
dev_info(sm5451->dev, "%s: start dual dc mode\n", __func__);
|
|
}
|
|
} else {
|
|
dev_info(sm5451->dev, "%s: unable to start sub dc standalone\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state < SM_DC_CHECK_VBAT) {
|
|
dev_info(sm5451->dev, "%s: charging off state (state=%d)\n", __func__, state);
|
|
ret = sm5451_sw_reset(sm5451);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: fail to sw reset(ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
sm5451_init_reg_param(sm5451);
|
|
sm5451_prechg_enable(sm5451, 1);
|
|
|
|
if (sm5451_sub) {
|
|
ret = sm5451_sw_reset(sm5451_sub);
|
|
if (ret < 0) {
|
|
dev_err(sm5451_sub->dev, "%s: fail to sw reset(ret=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
sm5451_init_reg_param(sm5451_sub);
|
|
sm5451_prechg_enable(sm5451_sub, 1);
|
|
}
|
|
} else if (state == SM_DC_CV_MAN) {
|
|
dev_info(sm5451->dev, "%s: skip start charging (state=%d)\n", __func__, state);
|
|
return 0;
|
|
}
|
|
|
|
ret = sm_dc_start_charging(sm_dc);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: fail to start direct-charging\n", __func__);
|
|
return ret;
|
|
}
|
|
__pm_stay_awake(sm5451->chg_ws);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_stop_charging(struct sm5451_charger *sm5451)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
|
|
msleep(30);
|
|
sm_dc_stop_charging(sm_dc);
|
|
|
|
__pm_relax(sm5451->chg_ws);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_start_pass_through_charging(struct sm5451_charger *sm5451)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
int ret;
|
|
|
|
if (sm5451->cable_online < 1) {
|
|
dev_err(sm5451->dev, "%s: can't detect valid cable connection(online=%d)\n",
|
|
__func__, sm5451->cable_online);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (state < SM_DC_PRESET) {
|
|
pr_err("%s %s: charging off state (state=%d)\n", sm_dc->name, __func__, sm_dc->state);
|
|
return -ENODEV;
|
|
}
|
|
|
|
sm5451_stop_charging(sm5451);
|
|
sm5451_prechg_enable(sm5451, 1);
|
|
msleep(200);
|
|
|
|
/* Disable IBUSUCP & Set freq*/
|
|
sm5451_set_freq(sm5451, sm5451->pdata->freq_byp); /* FREQ */
|
|
sm5451_write_reg(sm5451, SM5451_REG_CNTL3, 0x83); /* RLTVOVP = disabled, RLTVUVP = disabled */
|
|
sm5451_update_reg(sm5451, SM5451_REG_IBUS_PROT, 0, 0x1, 7); /* IBUSUCP = disabled */
|
|
|
|
ret = sm_dc_start_manual_charging(sm_dc);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: fail to start direct-charging\n", __func__);
|
|
return ret;
|
|
}
|
|
__pm_stay_awake(sm5451->chg_ws);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_set_pass_through_ta_vol(struct sm5451_charger *sm5451, int delta_soc)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
|
|
if (sm5451->cable_online < 1) {
|
|
dev_err(sm5451->dev, "%s: can't detect valid cable connection(online=%d)\n",
|
|
__func__, sm5451->cable_online);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (state != SM_DC_CV_MAN) {
|
|
pr_err("%s %s: pass-through mode was not set.(dc state = %d)\n", sm_dc->name, __func__, sm_dc->state);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return sm_dc_set_ta_volt_by_soc(sm_dc, delta_soc);
|
|
}
|
|
|
|
static int psy_chg_get_online(struct sm5451_charger *sm5451)
|
|
{
|
|
u8 flag, vbus_pok, cable_online;
|
|
|
|
cable_online = sm5451->cable_online < 1 ? 0 : 1;
|
|
flag = sm5451_get_flag_status(sm5451, SM5451_REG_FLAG3);
|
|
dev_info(sm5451->dev, "%s: FLAG3=0x%x\n", __func__, flag);
|
|
vbus_pok = (flag >> 7) & 0x1;
|
|
|
|
if (vbus_pok != cable_online) {
|
|
dev_err(sm5451->dev, "%s: mismatched vbus state(vbus_pok:%d cable_online:%d)\n",
|
|
__func__, vbus_pok, sm5451->cable_online);
|
|
}
|
|
|
|
return sm5451->cable_online;
|
|
}
|
|
|
|
static int psy_chg_get_status(struct sm5451_charger *sm5451)
|
|
{
|
|
int status = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
u8 flag1, flag2, flag3, flag4;
|
|
|
|
flag1 = sm5451_get_flag_status(sm5451, SM5451_REG_FLAG1);
|
|
flag2 = sm5451_get_flag_status(sm5451, SM5451_REG_FLAG2);
|
|
flag3 = sm5451_get_flag_status(sm5451, SM5451_REG_FLAG3);
|
|
flag4 = sm5451_get_flag_status(sm5451, SM5451_REG_FLAG4);
|
|
dev_info(sm5451->dev, "%s: FLAG:0x%x:0x%x:0x%x:0x%x\n",
|
|
__func__, flag1, flag2, flag3, flag4);
|
|
|
|
if (sm5451_check_charging_enable(sm5451)) {
|
|
status = POWER_SUPPLY_STATUS_CHARGING;
|
|
} else {
|
|
if ((flag3 >> 7) & 0x1) { /* check vbus-pok */
|
|
status = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
} else {
|
|
status = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int psy_chg_get_health(struct sm5451_charger *sm5451)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
int health = POWER_SUPPLY_HEALTH_GOOD;
|
|
u8 flag, chg_on;
|
|
|
|
if (state == SM_DC_ERR) {
|
|
health = POWER_SUPPLY_EXT_HEALTH_DC_ERR;
|
|
dev_info(sm5451->dev, "%s: chg_state=%d, health=%d\n",
|
|
__func__, state, health);
|
|
} else if (state >= SM_DC_PRE_CC && state <= SM_DC_CV) {
|
|
chg_on = sm5451_check_charging_enable(sm5451);
|
|
flag = sm5451_get_flag_status(sm5451, SM5451_REG_FLAG3);
|
|
if (chg_on == false) {
|
|
health = POWER_SUPPLY_EXT_HEALTH_DC_ERR;
|
|
} else if (((flag >> 7) & 0x1) == 0x0) { /* VBUS_POK status is disabled */
|
|
health = POWER_SUPPLY_EXT_HEALTH_DC_ERR;
|
|
}
|
|
|
|
dev_info(sm5451->dev, "%s: chg_on=%d, flag3=0x%x, health=%d\n",
|
|
__func__, chg_on, flag, health);
|
|
}
|
|
|
|
return health;
|
|
}
|
|
|
|
static int psy_chg_get_chg_vol(struct sm5451_charger *sm5451)
|
|
{
|
|
u32 chg_vol = sm5451_get_vbatreg(sm5451);
|
|
|
|
dev_info(sm5451->dev, "%s: VBAT_REG=%dmV\n", __func__, chg_vol);
|
|
|
|
return chg_vol;
|
|
}
|
|
|
|
static int psy_chg_get_input_curr(struct sm5451_charger *sm5451)
|
|
{
|
|
u32 input_curr = sm5451_get_ibuslim(sm5451);
|
|
|
|
dev_info(sm5451->dev, "%s: IBUSLIM=%dmA\n", __func__, input_curr);
|
|
|
|
return input_curr;
|
|
}
|
|
|
|
static int psy_chg_get_ext_monitor_work(struct sm5451_charger *sm5451)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
int adc_vbus, adc_ibus, adc_vbat, adc_ibat, adc_them, adc_tdie;
|
|
|
|
if (state < SM_DC_CHECK_VBAT && (sm_dc->chip_id != SM5451_SUB)) {
|
|
dev_info(sm5451->dev, "%s: charging off state (state=%d)\n", __func__, state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
adc_vbus = sm5451_convert_adc(sm5451, SM5451_ADC_VBUS);
|
|
adc_ibus = sm5451_convert_adc(sm5451, SM5451_ADC_IBUS);
|
|
adc_vbat = sm5451_convert_adc(sm5451, SM5451_ADC_VBAT);
|
|
adc_ibat = sm5451_convert_adc(sm5451, SM5451_ADC_IBAT);
|
|
adc_them = sm5451_convert_adc(sm5451, SM5451_ADC_THEM);
|
|
adc_tdie = sm5451_convert_adc(sm5451, SM5451_ADC_TDIE);
|
|
|
|
pr_info("sm5451-charger: adc_monitor: vbus:%d:ibus:%d:vbat:%d:ibat:%d:them:%d:tdie:%d\n",
|
|
adc_vbus, adc_ibus, adc_vbat, adc_ibat, adc_them, adc_tdie);
|
|
sm5451_print_regmap(sm5451);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int psy_chg_get_ext_measure_input(struct sm5451_charger *sm5451, int index)
|
|
{
|
|
struct sm5451_charger *sm5451_sub = NULL;
|
|
struct power_supply *psy_dc_sub = NULL;
|
|
int adc = 0;
|
|
|
|
if (sm5451->chip_id != SM5451_SUB) {
|
|
psy_dc_sub = power_supply_get_by_name("sm5451-charger-sub");
|
|
if (!psy_dc_sub)
|
|
sm5451_sub = NULL;
|
|
else
|
|
sm5451_sub = power_supply_get_drvdata(psy_dc_sub);
|
|
}
|
|
|
|
switch (index) {
|
|
case SEC_BATTERY_IIN_MA:
|
|
if (sm5451_sub)
|
|
adc = sm5451_convert_adc(sm5451_sub, SM5451_ADC_IBUS);
|
|
adc += sm5451_convert_adc(sm5451, SM5451_ADC_IBUS);
|
|
break;
|
|
case SEC_BATTERY_IIN_UA:
|
|
if (sm5451_sub)
|
|
adc = sm5451_convert_adc(sm5451_sub, SM5451_ADC_IBUS) * 1000;
|
|
adc += sm5451_convert_adc(sm5451, SM5451_ADC_IBUS) * 1000;
|
|
break;
|
|
case SEC_BATTERY_VIN_MA:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_VBUS);
|
|
break;
|
|
case SEC_BATTERY_VIN_UA:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_VBUS) * 1000;
|
|
break;
|
|
default:
|
|
adc = 0;
|
|
break;
|
|
}
|
|
|
|
dev_info(sm5451->dev, "%s: index=%d, adc=%d\n", __func__, index, adc);
|
|
|
|
return adc;
|
|
}
|
|
|
|
static const char * const sm5451_dc_state_str[] = {
|
|
"NO_CHARGING", "DC_ERR", "CHARGING_DONE", "CHECK_VBAT", "PRESET_DC",
|
|
"ADJUST_CC", "UPDATE_BAT", "CC_MODE", "CV_MODE", "CV_MAN_MODE"
|
|
};
|
|
static int psy_chg_get_ext_direct_charger_chg_status(
|
|
struct sm5451_charger *sm5451, union power_supply_propval *val)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
|
|
val->strval = sm5451_dc_state_str[state];
|
|
pr_info("%s: CHARGER_STATUS(%s)\n", __func__, val->strval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_chg_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp, union power_supply_propval *val)
|
|
{
|
|
struct sm5451_charger *sm5451 = power_supply_get_drvdata(psy);
|
|
enum power_supply_ext_property ext_psp =
|
|
(enum power_supply_ext_property)psp;
|
|
int adc_them;
|
|
|
|
dev_info(sm5451->dev, "%s: psp=%d\n", __func__, psp);
|
|
|
|
switch ((int)psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = psy_chg_get_online(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
val->intval = psy_chg_get_status(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
val->intval = psy_chg_get_health(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
|
val->intval = psy_chg_get_chg_vol(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
val->intval = psy_chg_get_input_curr(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
val->intval = sm5451->target_ibat;
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
adc_them = sm5451_convert_adc(sm5451, SM5451_ADC_THEM);
|
|
val->intval = adc_them;
|
|
break;
|
|
#if IS_ENABLED(CONFIG_DUAL_BATTERY)
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
val->intval = sm5451_convert_adc(sm5451, SM5451_ADC_VBAT);
|
|
break;
|
|
#endif
|
|
case POWER_SUPPLY_EXT_PROP_MIN ... POWER_SUPPLY_EXT_PROP_MAX:
|
|
switch (ext_psp) {
|
|
case POWER_SUPPLY_EXT_PROP_CHARGING_ENABLED:
|
|
val->intval = sm5451_check_charging_enable(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_MONITOR_WORK:
|
|
psy_chg_get_ext_monitor_work(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_MEASURE_INPUT:
|
|
val->intval = psy_chg_get_ext_measure_input(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_MEASURE_SYS:
|
|
dev_err(sm5451->dev, "%s: need to works\n", __func__);
|
|
/*
|
|
* Need to check operation details.. by SEC.
|
|
*/
|
|
val->intval = -EINVAL;
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_DIRECT_CHARGER_CHG_STATUS:
|
|
psy_chg_get_ext_direct_charger_chg_status(sm5451, val);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_PASS_THROUGH_MODE:
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_PASS_THROUGH_MODE_TA_VOL:
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_D2D_REVERSE_VOLTAGE:
|
|
val->intval = sm5451->rev_boost ? 1 : 0;
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_D2D_REVERSE_OCP:
|
|
val->intval = sm5451_get_reverse_boost_ocp(sm5451);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_D2D_REVERSE_VBUS:
|
|
val->intval = sm5451_convert_adc(sm5451, SM5451_ADC_VBUS);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_DC_OP_MODE:
|
|
val->intval = sm5451_get_op_mode(sm5451);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int psy_chg_set_online(struct sm5451_charger *sm5451, int online)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int ret = 0;
|
|
|
|
dev_info(sm5451->dev, "%s: online=%d\n", __func__, online);
|
|
|
|
if (online < 2) {
|
|
if (sm_dc_get_current_state(sm_dc) > SM_DC_EOC)
|
|
sm5451_stop_charging(sm5451);
|
|
}
|
|
sm5451->cable_online = online;
|
|
|
|
sm5451->vbus_in = sm5451->cable_online > 2 ? true : false;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int psy_chg_set_const_chg_voltage(struct sm5451_charger *sm5451, int vbat)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
int ret = 0;
|
|
|
|
dev_info(sm5451->dev, "%s: [%dmV] to [%dmV]\n", __func__, sm5451->target_vbat, vbat);
|
|
|
|
if (sm5451->target_vbat != vbat || state < SM_DC_CHECK_VBAT) {
|
|
sm5451->target_vbat = vbat;
|
|
ret = sm_dc_set_target_vbat(sm_dc, sm5451->target_vbat);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int psy_chg_set_chg_curr(struct sm5451_charger *sm5451, int ibat)
|
|
{
|
|
int ret = 0;
|
|
|
|
dev_info(sm5451->dev, "%s: dldn't support cc_loop\n", __func__);
|
|
sm5451->target_ibat = ibat;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int psy_chg_set_input_curr(struct sm5451_charger *sm5451, int ibus)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int state = sm_dc_get_current_state(sm_dc);
|
|
int ret = 0;
|
|
|
|
dev_info(sm5451->dev, "%s: ibus [%dmA] to [%dmA]\n", __func__, sm5451->target_ibus, ibus);
|
|
|
|
if (sm5451->target_ibus != ibus || state < SM_DC_CHECK_VBAT) {
|
|
sm5451->target_ibus = ibus;
|
|
if (sm5451->target_ibus < SM5451_TA_MIN_CURRENT) {
|
|
dev_info(sm5451->dev, "%s: can't used less then ta_min_current(%dmA)\n",
|
|
__func__, SM5451_TA_MIN_CURRENT);
|
|
sm5451->target_ibus = SM5451_TA_MIN_CURRENT;
|
|
}
|
|
ret = sm_dc_set_target_ibus(sm_dc, sm5451->target_ibus);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int psy_chg_set_const_chg_voltage_max(struct sm5451_charger *sm5451, int max_vbat)
|
|
{
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
|
|
dev_info(sm5451->dev, "%s: max_vbat [%dmA] to [%dmA]\n",
|
|
__func__, sm5451->max_vbat, max_vbat);
|
|
|
|
sm5451->max_vbat = max_vbat;
|
|
sm_dc->config.chg_float_voltage = max_vbat;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int psy_chg_ext_wdt_control(struct sm5451_charger *sm5451, int wdt_control)
|
|
{
|
|
if (wdt_control)
|
|
sm5451->wdt_disable = 1;
|
|
else
|
|
sm5451->wdt_disable = 0;
|
|
|
|
dev_info(sm5451->dev, "%s: wdt_disable=%d\n", __func__, sm5451->wdt_disable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_chg_set_property(struct power_supply *psy,
|
|
enum power_supply_property psp, const union power_supply_propval *val)
|
|
{
|
|
struct sm5451_charger *sm5451 = power_supply_get_drvdata(psy);
|
|
enum power_supply_ext_property ext_psp =
|
|
(enum power_supply_ext_property) psp;
|
|
|
|
int ret = 0;
|
|
|
|
dev_info(sm5451->dev, "%s: psp=%d, val-intval=%d\n", __func__, psp, val->intval);
|
|
|
|
switch ((int)psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
psy_chg_set_online(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
|
ret = psy_chg_set_const_chg_voltage(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
|
|
ret = psy_chg_set_const_chg_voltage_max(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
ret = psy_chg_set_chg_curr(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
ret = psy_chg_set_input_curr(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_MIN ... POWER_SUPPLY_EXT_PROP_MAX:
|
|
switch (ext_psp) {
|
|
case POWER_SUPPLY_EXT_PROP_DIRECT_WDT_CONTROL:
|
|
ret = psy_chg_ext_wdt_control(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_CHARGING_ENABLED:
|
|
if (val->intval)
|
|
ret = sm5451_start_charging(sm5451);
|
|
else
|
|
ret = sm5451_stop_charging(sm5451);
|
|
|
|
sm5451_print_regmap(sm5451);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_DIRECT_CURRENT_MAX:
|
|
ret = psy_chg_set_input_curr(sm5451, val->intval);
|
|
break;
|
|
case POWER_SUPPLY_EXT_PROP_DIRECT_ADC_CTRL:
|
|
if (val->intval)
|
|
sm5451_enable_adc_oneshot(sm5451, 1);
|
|
else
|
|
sm5451_enable_adc_oneshot(sm5451, 0);
|
|
sm5451->force_adc_on = val->intval;
|
|
pr_info("%s: ADC_CTRL : %d\n", __func__, val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_PASS_THROUGH_MODE:
|
|
pr_info("[PASS_THROUGH] %s: called\n", __func__);
|
|
if (val->intval)
|
|
ret = sm5451_start_pass_through_charging(sm5451);
|
|
else
|
|
ret = sm5451_stop_charging(sm5451);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_PASS_THROUGH_MODE_TA_VOL:
|
|
pr_info("[PASS_THROUGH_VOL] %s: called\n", __func__);
|
|
sm5451_set_pass_through_ta_vol(sm5451, val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_D2D_REVERSE_VOLTAGE:
|
|
sm5451_reverse_boost_enable(sm5451, val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_ADC_MODE:
|
|
if (val->intval)
|
|
sm5451_set_adc_mode(sm5451->i2c, SM_DC_ADC_MODE_CONTINUOUS);
|
|
else
|
|
sm5451_set_adc_mode(sm5451->i2c, SM_DC_ADC_MODE_OFF);
|
|
break;
|
|
|
|
case POWER_SUPPLY_EXT_PROP_DC_OP_MODE:
|
|
if (val->intval == 1)
|
|
sm5451_set_op_mode(sm5451, OP_MODE_REV_BOOST);
|
|
else if (val->intval == 0)
|
|
sm5451_set_op_mode(sm5451, OP_MODE_INIT);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static char *sm5451_supplied_to[] = {
|
|
"sm5451-charger",
|
|
};
|
|
|
|
static enum power_supply_property sm5451_charger_props[] = {
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
};
|
|
|
|
static const struct power_supply_desc sm5451_charger_power_supply_desc = {
|
|
.name = "sm5451-charger",
|
|
.type = POWER_SUPPLY_TYPE_UNKNOWN,
|
|
.get_property = sm5451_chg_get_property,
|
|
.set_property = sm5451_chg_set_property,
|
|
.properties = sm5451_charger_props,
|
|
.num_properties = ARRAY_SIZE(sm5451_charger_props),
|
|
};
|
|
|
|
static const struct power_supply_desc sm5451_charger_power_supply_sub_desc = {
|
|
.name = "sm5451-charger-sub",
|
|
.type = POWER_SUPPLY_TYPE_UNKNOWN,
|
|
.get_property = sm5451_chg_get_property,
|
|
.set_property = sm5451_chg_set_property,
|
|
.properties = sm5451_charger_props,
|
|
.num_properties = ARRAY_SIZE(sm5451_charger_props),
|
|
};
|
|
|
|
static int sm5451_get_adc_value(struct i2c_client *i2c, u8 adc_ch)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
int adc;
|
|
|
|
switch (adc_ch) {
|
|
case SM_DC_ADC_THEM:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_THEM);
|
|
break;
|
|
case SM_DC_ADC_DIETEMP:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_TDIE);
|
|
break;
|
|
case SM_DC_ADC_VBAT:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_VBAT);
|
|
break;
|
|
case SM_DC_ADC_IBAT:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_IBAT);
|
|
break;
|
|
case SM_DC_ADC_VBUS:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_VBUS);
|
|
break;
|
|
case SM_DC_ADC_IBUS:
|
|
adc = sm5451_convert_adc(sm5451, SM5451_ADC_IBUS);
|
|
break;
|
|
case SM_DC_ADC_VOUT:
|
|
default:
|
|
adc = 0;
|
|
break;
|
|
}
|
|
|
|
return adc;
|
|
}
|
|
|
|
static int sm5451_get_charging_enable(struct i2c_client *i2c)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
|
|
return sm5451_check_charging_enable(sm5451);
|
|
}
|
|
|
|
static int sm5451_set_charging_enable(struct i2c_client *i2c, bool enable)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
|
|
sm5451_prechg_enable(sm5451, 0);
|
|
if (enable) {
|
|
if (sm_dc->ta.v_max < SM_DC_BYPASS_TA_MAX_VOL)
|
|
sm5451_set_op_mode(sm5451, OP_MODE_FW_BYPASS);
|
|
else
|
|
sm5451_set_op_mode(sm5451, OP_MODE_FW_BOOST);
|
|
} else {
|
|
sm5451_set_op_mode(sm5451, OP_MODE_INIT);
|
|
}
|
|
|
|
sm5451_print_regmap(sm5451);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_dc_set_charging_config(struct i2c_client *i2c, u32 cv_gl, u32 ci_gl, u32 cc_gl)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
u32 vbatreg, ibuslim, freq;
|
|
|
|
vbatreg = cv_gl + SM5451_CV_OFFSET;
|
|
if (ci_gl <= SM5451_TA_MIN_CURRENT)
|
|
ibuslim = ci_gl + (SM5451_CI_OFFSET * 2);
|
|
else
|
|
ibuslim = ci_gl + SM5451_CI_OFFSET;
|
|
|
|
if (ibuslim % 100)
|
|
ibuslim = ((ibuslim / 100) * 100) + 100;
|
|
|
|
if (ci_gl <= SM5451_SIOP_LEV1)
|
|
freq = sm5451->pdata->freq_siop[0];
|
|
else if (ci_gl <= SM5451_SIOP_LEV2)
|
|
freq = sm5451->pdata->freq_siop[1];
|
|
else
|
|
freq = sm5451->pdata->freq;
|
|
|
|
sm5451_set_ibuslim(sm5451, ibuslim);
|
|
sm5451_set_vbatreg(sm5451, vbatreg);
|
|
sm5451_set_freq(sm5451, freq);
|
|
|
|
pr_info("%s %s: vbat_reg=%dmV, ibus_lim=%dmA, freq=%dkHz\n", sm_dc->name,
|
|
__func__, vbatreg, ibuslim, SM5451_freq_val[freq]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_x2bat_dc_set_charging_config(struct i2c_client *i2c, u32 cv_gl, u32 ci_gl, u32 cc_gl)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
u32 vbatreg, ibuslim, freq;
|
|
|
|
vbatreg = cv_gl + SM5451_CV_OFFSET;
|
|
|
|
if (sm_dc->chip_id == SM5451_SUB) {
|
|
if (ci_gl <= SM5451_TA_MIN_CURRENT)
|
|
ibuslim = ci_gl + SM_DC_CI_OFFSET_X2BAT + SM5451_CI_OFFSET;
|
|
else
|
|
ibuslim = ci_gl + SM_DC_CI_OFFSET_X2BAT;
|
|
|
|
if (ibuslim % 100)
|
|
ibuslim = ((ibuslim / 100) * 100) + 100;
|
|
} else {
|
|
ibuslim = ((ci_gl - 100) / 100) * 100;
|
|
}
|
|
|
|
if (ci_gl <= SM5451_SIOP_LEV1)
|
|
freq = sm5451->pdata->freq_siop[0];
|
|
else if (ci_gl <= SM5451_SIOP_LEV2)
|
|
freq = sm5451->pdata->freq_siop[1];
|
|
else
|
|
freq = sm5451->pdata->freq;
|
|
|
|
sm5451_set_ibuslim(sm5451, ibuslim);
|
|
sm5451_set_vbatreg(sm5451, vbatreg);
|
|
sm5451_set_freq(sm5451, freq);
|
|
|
|
pr_info("%s %s: vbat_reg=%dmV, ibus_lim=%dmA, freq=%dkHz\n", sm_dc->name,
|
|
__func__, vbatreg, ibuslim, SM5451_freq_val[freq]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 sm5451_get_dc_error_status(struct i2c_client *i2c)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
u8 flag1, flag2, flag3, flag4, op_mode;
|
|
u8 flag1_s, flag2_s, flag3_s, flag4_s;
|
|
u32 err = SM_DC_ERR_NONE;
|
|
int vnow = 0;
|
|
|
|
mutex_lock(&sm5451->i2c_lock);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG1, &flag1);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG2, &flag2);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG3, &flag3);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG4, &flag4);
|
|
pr_info("%s %s: FLAG:0x%x:0x%x:0x%x:0x%x\n", sm_dc->name,
|
|
__func__, flag1, flag2, flag3, flag4);
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG1, &flag1_s);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG2, &flag2_s);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG3, &flag3_s);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG4, &flag4_s);
|
|
op_mode = sm5451_get_op_mode(sm5451);
|
|
pr_info("%s %s: FLAG:0x%x:0x%x:0x%x:0x%x op_mode=0x%x\n", sm_dc->name,
|
|
__func__, flag1_s, flag2_s, flag3_s, flag4_s, op_mode);
|
|
mutex_unlock(&sm5451->i2c_lock);
|
|
|
|
if (sm_dc->chip_id != SM5451_SUB)
|
|
vnow = sm5451_get_vnow(sm5451);
|
|
|
|
if ((op_mode == OP_MODE_INIT) && (sm_dc->wq.retry_cnt < 3) && (sm_dc->chip_id != SM5451_SUB)) {
|
|
pr_info("%s %s: try to retry, cnt:%d\n", sm_dc->name, __func__, sm_dc->wq.retry_cnt);
|
|
sm_dc->wq.retry_cnt++;
|
|
err = SM_DC_ERR_RETRY;
|
|
} else if (op_mode == OP_MODE_INIT) {
|
|
if ((flag1 & SM5451_FLAG1_IBUSUCP) || (flag1_s & SM5451_FLAG1_IBUSUCP))
|
|
err += SM_DC_ERR_IBUSUCP;
|
|
if ((flag3 & SM5451_FLAG3_VBUSUVLO) || (flag3_s & SM5451_FLAG3_VBUSUVLO))
|
|
err += SM_DC_ERR_VBUSUVLO;
|
|
if ((flag1 & SM5451_FLAG1_VBUSOVP) || (flag1_s & SM5451_FLAG1_VBUSOVP))
|
|
err += SM_DC_ERR_VBUSOVP;
|
|
if ((flag1 & SM5451_FLAG1_IBUSOCP) || (flag1_s & SM5451_FLAG1_IBUSOCP))
|
|
err += SM_DC_ERR_IBUSOCP;
|
|
if ((flag2 & SM5451_FLAG2_CNSHTP) || (flag2_s & SM5451_FLAG2_CNSHTP))
|
|
err += SM_DC_ERR_CN_SHORT;
|
|
if ((flag3 & SM5451_FLAG3_CFLYSHTP) || (flag3_s & SM5451_FLAG3_CFLYSHTP))
|
|
err += SM_DC_ERR_CFLY_SHORT;
|
|
|
|
if (err == SM_DC_ERR_NONE)
|
|
err += SM_DC_ERR_UNKNOWN;
|
|
|
|
if (err == SM_DC_ERR_UNKNOWN && sm_dc->chip_id == SM5451_SUB)
|
|
pr_info("%s %s: SM_DC_ERR_NONE\n", sm_dc->name, __func__);
|
|
else
|
|
pr_info("%s %s: SM_DC_ERR(err=0x%x)\n", sm_dc->name, __func__, err);
|
|
} else {
|
|
if (flag3_s & SM5451_FLAG3_VBUSUVLO) {
|
|
pr_info("%s %s: vbus uvlo detected, try to retry\n", sm_dc->name, __func__);
|
|
err = SM_DC_ERR_RETRY;
|
|
} else if ((flag2 & SM5451_FLAG2_VBATREG) || (flag2_s & SM5451_FLAG2_VBATREG) ||
|
|
(sm_dc->target_vbat <= vnow)) {
|
|
pr_info("%s %s: VBATREG detected\n", sm_dc->name, __func__);
|
|
err = SM_DC_ERR_VBATREG;
|
|
} else if (flag4_s & SM5451_FLAG4_IBUSREG) {
|
|
pr_info("%s %s: IBUSREG detected\n", sm_dc->name, __func__);
|
|
err = SM_DC_ERR_IBUSREG;
|
|
} else if (vnow < 0) {
|
|
err = SM_DC_ERR_INVAL_VBAT;
|
|
pr_info("%s %s: SM_DC_ERR(err=0x%x)\n", sm_dc->name, __func__, err);
|
|
}
|
|
}
|
|
|
|
if (!sm5451->wdt_disable)
|
|
sm5451_kick_wdt(sm5451);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int sm5451_send_pd_msg(struct i2c_client *i2c, struct sm_dc_power_source_info *ta)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int ret;
|
|
|
|
mutex_lock(&sm5451->pd_lock);
|
|
|
|
ret = sec_pd_select_pps(ta->pdo_pos, ta->v, ta->c);
|
|
if (ret == -EBUSY) {
|
|
pr_info("%s %s: request again\n", sm_dc->name, __func__);
|
|
msleep(100);
|
|
ret = sec_pd_select_pps(ta->pdo_pos, ta->v, ta->c);
|
|
}
|
|
|
|
mutex_unlock(&sm5451->pd_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sm5451_get_apdo_max_power(struct i2c_client *i2c, struct sm_dc_power_source_info *ta)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
int ret;
|
|
|
|
ta->pdo_pos = 0; /* set '0' else return error */
|
|
ta->v_max = 10000; /* request voltage level */
|
|
ta->c_max = 0;
|
|
ta->p_max = 0;
|
|
|
|
ret = sec_pd_get_apdo_max_power(&ta->pdo_pos, &ta->v_max, &ta->c_max, &ta->p_max);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: error:sec_pd_get_apdo_max_power\n", __func__);
|
|
} else {
|
|
sm_dc->ta.pdo_pos = ta->pdo_pos;
|
|
sm_dc->ta.v_max = ta->v_max;
|
|
sm_dc->ta.c_max = ta->c_max;
|
|
sm_dc->ta.p_max = ta->p_max;
|
|
}
|
|
|
|
dev_info(sm5451->dev, "%s: pdo_pos:%d, max_vol:%dmV, max_cur:%dmA, max_pwr:%dmW\n",
|
|
__func__, ta->pdo_pos, ta->v_max, ta->c_max, ta->p_max);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static u32 sm5451_get_target_ibus(struct i2c_client *i2c)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
|
|
dev_info(sm5451->dev, "%s: %dmA\n", __func__, sm5451->target_ibus);
|
|
return sm5451->target_ibus;
|
|
}
|
|
|
|
static const struct sm_dc_ops sm5451_dc_pps_ops = {
|
|
.get_adc_value = sm5451_get_adc_value,
|
|
.set_adc_mode = sm5451_set_adc_mode,
|
|
.get_charging_enable = sm5451_get_charging_enable,
|
|
.get_dc_error_status = sm5451_get_dc_error_status,
|
|
.set_charging_enable = sm5451_set_charging_enable,
|
|
.set_charging_config = sm5451_dc_set_charging_config,
|
|
.send_power_source_msg = sm5451_send_pd_msg,
|
|
.get_apdo_max_power = sm5451_get_apdo_max_power,
|
|
.get_target_ibus = sm5451_get_target_ibus,
|
|
};
|
|
|
|
static const struct sm_dc_ops sm5451_x2bat_dc_pps_ops = {
|
|
.get_adc_value = sm5451_get_adc_value,
|
|
.set_adc_mode = sm5451_set_adc_mode,
|
|
.get_charging_enable = sm5451_get_charging_enable,
|
|
.get_dc_error_status = sm5451_get_dc_error_status,
|
|
.set_charging_enable = sm5451_set_charging_enable,
|
|
.set_charging_config = sm5451_x2bat_dc_set_charging_config,
|
|
.send_power_source_msg = sm5451_send_pd_msg,
|
|
.get_apdo_max_power = sm5451_get_apdo_max_power,
|
|
.get_target_ibus = sm5451_get_target_ibus,
|
|
};
|
|
|
|
static irqreturn_t sm5451_irq_thread(int irq, void *data)
|
|
{
|
|
struct sm5451_charger *sm5451 = (struct sm5451_charger *)data;
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
u8 op_mode = sm5451_get_op_mode(sm5451);
|
|
u8 flag1, flag2, flag3, flag4;
|
|
u32 err = 0x0;
|
|
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG1, &flag1);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG2, &flag2);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG3, &flag3);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG4, &flag4);
|
|
dev_info(sm5451->dev, "%s: FLAG:0x%x:0x%x:0x%x:0x%x\n",
|
|
__func__, flag1, flag2, flag3, flag4);
|
|
|
|
/* check forced CUT-OFF status */
|
|
if (sm_dc_get_current_state(sm_dc) > SM_DC_PRESET &&
|
|
op_mode == OP_MODE_INIT) {
|
|
if (flag1 & SM5451_FLAG1_VBUSOVP)
|
|
err += SM_DC_ERR_VBUSOVP;
|
|
|
|
if (flag1 & SM5451_FLAG1_IBUSOCP)
|
|
err += SM_DC_ERR_IBUSOCP;
|
|
|
|
if (flag1 & SM5451_FLAG1_IBUSUCP)
|
|
err += SM_DC_ERR_IBUSUCP;
|
|
|
|
if (flag2 & SM5451_FLAG2_VBATOVP)
|
|
err += SM_DC_ERR_VBATOVP;
|
|
|
|
/* un-used IBATOCP protection
|
|
* if (flag2 & SM5451_FLAG2_IBATOCP)
|
|
* err += SM_DC_ERR_IBATOCP;
|
|
*/
|
|
if (flag2 & SM5451_FLAG2_TSD)
|
|
err += SM_DC_ERR_TSD;
|
|
|
|
if (flag2 & SM5451_FLAG2_RLTVOVP)
|
|
err += SM_DC_ERR_STUP_FAIL;
|
|
|
|
if (flag2 & SM5451_FLAG2_RLTVUVP)
|
|
err += SM_DC_ERR_STUP_FAIL;
|
|
|
|
if (flag2 & SM5451_FLAG2_CNSHTP)
|
|
err += SM_DC_ERR_CN_SHORT;
|
|
|
|
if (flag3 & SM5451_FLAG3_VBUSUVLO)
|
|
err += SM_DC_ERR_VBUSUVLO;
|
|
|
|
if (flag3 & SM5451_FLAG3_CFLYSHTP)
|
|
err += SM_DC_ERR_CFLY_SHORT;
|
|
|
|
dev_err(sm5451->dev, "%s: forced charge cut-off(err=0x%x)\n", __func__, err);
|
|
sm_dc_report_error_status(sm_dc, err);
|
|
}
|
|
|
|
if (flag2 & SM5451_FLAG2_VBATREG) {
|
|
dev_info(sm5451->dev, "%s: VBATREG detected\n", __func__);
|
|
sm_dc_report_interrupt_event(sm_dc, SM_DC_INT_VBATREG);
|
|
}
|
|
if (flag2 & SM5451_FLAG2_IBATREG)
|
|
dev_info(sm5451->dev, "%s: IBATREG detected\n", __func__);
|
|
|
|
if (flag4 & SM5451_FLAG4_IBUSREG)
|
|
dev_info(sm5451->dev, "%s: IBUSREG detected\n", __func__);
|
|
|
|
if (flag3 & SM5451_FLAG3_VBUSPOK)
|
|
dev_info(sm5451->dev, "%s: VBUSPOK detected\n", __func__);
|
|
|
|
if (flag3 & SM5451_FLAG3_VBUSUVLO)
|
|
dev_info(sm5451->dev, "%s: VBUSUVLO detected\n", __func__);
|
|
|
|
if (flag3 & SM5451_FLAG3_WTDTMR) {
|
|
dev_info(sm5451->dev, "%s: Watchdog Timer expired\n", __func__);
|
|
sm_dc_report_interrupt_event(sm_dc, SM_DC_INT_WDTOFF);
|
|
}
|
|
|
|
dev_info(sm5451->dev, "closed %s\n", __func__);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sm5451_irq_init(struct sm5451_charger *sm5451)
|
|
{
|
|
int ret;
|
|
u8 reg;
|
|
|
|
sm5451->irq = gpio_to_irq(sm5451->pdata->irq_gpio);
|
|
dev_info(sm5451->dev, "%s: irq_gpio=%d, irq=%d\n", __func__,
|
|
sm5451->pdata->irq_gpio, sm5451->irq);
|
|
|
|
ret = gpio_request(sm5451->pdata->irq_gpio, "sm5540_irq");
|
|
if (ret) {
|
|
dev_err(sm5451->dev, "%s: fail to request gpio(ret=%d)\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
gpio_direction_input(sm5451->pdata->irq_gpio);
|
|
gpio_free(sm5451->pdata->irq_gpio);
|
|
|
|
sm5451_write_reg(sm5451, SM5451_REG_FLAGMSK1, 0xE2);
|
|
sm5451_write_reg(sm5451, SM5451_REG_FLAGMSK2, 0x00);
|
|
sm5451_write_reg(sm5451, SM5451_REG_FLAGMSK3, 0xD6);
|
|
sm5451_write_reg(sm5451, SM5451_REG_FLAGMSK4, 0xDA);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG1, ®);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG2, ®);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG3, ®);
|
|
sm5451_read_reg(sm5451, SM5451_REG_FLAG4, ®);
|
|
|
|
ret = request_threaded_irq(sm5451->irq, NULL, sm5451_irq_thread,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
"sm5451-irq", sm5451);
|
|
if (ret) {
|
|
dev_err(sm5451->dev, "%s: fail to request irq(ret=%d)\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sm5451_hw_init_config(struct sm5451_charger *sm5451)
|
|
{
|
|
int ret;
|
|
u8 reg;
|
|
|
|
/* check to valid I2C transfer & register control */
|
|
ret = sm5451_read_reg(sm5451, SM5451_REG_DEVICE_ID, ®);
|
|
if (ret < 0 || (reg & 0xF) != 0x1) {
|
|
dev_err(sm5451->dev, "%s: device not found on this channel (reg=0x%x)\n",
|
|
__func__, reg);
|
|
}
|
|
sm5451->pdata->rev_id = (reg >> 4) & 0xf;
|
|
|
|
sm5451_init_reg_param(sm5451);
|
|
|
|
#if IS_ENABLED(CONFIG_BATTERY_SAMSUNG)
|
|
psy_chg_set_const_chg_voltage(sm5451, sm5451->pdata->battery.chg_float_voltage);
|
|
sm5451_reverse_boost_enable(sm5451, false);
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_OF)
|
|
static int sm5451_charger_parse_dt(struct device *dev,
|
|
struct sm5451_platform_data *pdata)
|
|
{
|
|
struct device_node *np_sm5451 = dev->of_node;
|
|
struct device_node *np_battery;
|
|
int ret;
|
|
|
|
/* Parse: sm5451 node */
|
|
if (!np_sm5451) {
|
|
dev_err(dev, "%s: empty of_node for sm5451_dev\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
pdata->irq_gpio = of_get_named_gpio(np_sm5451, "sm5451,irq-gpio", 0);
|
|
dev_info(dev, "parse_dt: irq_gpio=%d\n", pdata->irq_gpio);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,pps_lr", &pdata->pps_lr);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,pps_lr is Empty\n", __func__);
|
|
pdata->pps_lr = 340000;
|
|
}
|
|
dev_info(dev, "parse_dt: pps_lr=%d\n", pdata->pps_lr);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,rpcm", &pdata->rpcm);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,rpcm is Empty\n", __func__);
|
|
pdata->rpcm = 55000;
|
|
}
|
|
dev_info(dev, "parse_dt: rpcm=%d\n", pdata->rpcm);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,r_ttl", &pdata->r_ttl);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,r_ttl is Empty\n", __func__);
|
|
pdata->r_ttl = 99000;
|
|
}
|
|
dev_info(dev, "parse_dt: r_ttl=%d\n", pdata->r_ttl);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,freq", &pdata->freq);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,freq is Empty\n", __func__);
|
|
pdata->freq = SM5451_FREQ_750KHZ;
|
|
}
|
|
dev_info(dev, "parse_dt: freq=%dkHz\n", SM5451_freq_val[pdata->freq]);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,freq_byp", &pdata->freq_byp);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,freq_byp is Empty\n", __func__);
|
|
pdata->freq_byp = SM5451_FREQ_375KHZ;
|
|
}
|
|
dev_info(dev, "parse_dt: freq_byp=%dkHz\n", SM5451_freq_val[pdata->freq_byp]);
|
|
|
|
ret = of_property_read_u32_array(np_sm5451, "sm5451,freq_siop", pdata->freq_siop, 2);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,freq_siop is Empty\n", __func__);
|
|
pdata->freq_siop[0] = SM5451_FREQ_200KHZ;
|
|
pdata->freq_siop[1] = SM5451_FREQ_375KHZ;
|
|
}
|
|
dev_info(dev, "parse_dt: freq_siop=%dkHz, %dkHz\n",
|
|
SM5451_freq_val[pdata->freq_siop[0]], SM5451_freq_val[pdata->freq_siop[1]]);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,topoff", &pdata->topoff);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,topoff is Empty\n", __func__);
|
|
pdata->topoff = 900;
|
|
}
|
|
dev_info(dev, "parse_dt: topoff=%d\n", pdata->topoff);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,x2bat_mode", &pdata->x2bat_mode);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,x2bat_mode is Empty\n", __func__);
|
|
pdata->x2bat_mode = 0;
|
|
}
|
|
dev_info(dev, "parse_dt: x2bat_mode=%d\n", pdata->x2bat_mode);
|
|
|
|
ret = of_property_read_u32(np_sm5451, "sm5451,en_vbatreg", &pdata->en_vbatreg);
|
|
if (ret) {
|
|
dev_info(dev, "%s: sm5451,en_vbatreg is Empty\n", __func__);
|
|
pdata->en_vbatreg = 0;
|
|
}
|
|
dev_info(dev, "parse_dt: en_vbatreg=%d\n", pdata->en_vbatreg);
|
|
|
|
/* Parse: battery node */
|
|
np_battery = of_find_node_by_name(NULL, "battery");
|
|
if (!np_battery) {
|
|
dev_err(dev, "%s: empty of_node for battery\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
ret = of_property_read_u32(np_battery, "battery,chg_float_voltage",
|
|
&pdata->battery.chg_float_voltage);
|
|
if (ret) {
|
|
dev_info(dev, "%s: battery,chg_float_voltage is Empty\n", __func__);
|
|
pdata->battery.chg_float_voltage = 4200;
|
|
}
|
|
ret = of_property_read_string(np_battery, "battery,charger_name",
|
|
(char const **)&pdata->battery.sec_dc_name);
|
|
if (ret) {
|
|
dev_info(dev, "%s: battery,charger_name is Empty\n", __func__);
|
|
pdata->battery.sec_dc_name = "sec-direct-charger";
|
|
}
|
|
ret = of_property_read_string(np_battery, "battery,fuelgauge_name",
|
|
(char const **)&pdata->battery.fuelgauge_name);
|
|
if (ret) {
|
|
dev_info(dev, "%s: battery,fuelgauge_name is Empty\n", __func__);
|
|
pdata->battery.fuelgauge_name = "sec-fuelgauge";
|
|
}
|
|
|
|
dev_info(dev, "parse_dt: float_v=%d, sec_dc_name=%s, fuelgauge_name=%s\n",
|
|
pdata->battery.chg_float_voltage, pdata->battery.sec_dc_name,
|
|
pdata->battery.fuelgauge_name);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
enum {
|
|
ADDR = 0,
|
|
SIZE,
|
|
DATA,
|
|
UPDATE,
|
|
TA_MIN,
|
|
};
|
|
static ssize_t chg_show_attrs(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
static ssize_t chg_store_attrs(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count);
|
|
#define CHARGER_ATTR(_name) \
|
|
{ \
|
|
.attr = {.name = #_name, .mode = 0660}, \
|
|
.show = chg_show_attrs, \
|
|
.store = chg_store_attrs, \
|
|
}
|
|
static struct device_attribute charger_attrs[] = {
|
|
CHARGER_ATTR(addr),
|
|
CHARGER_ATTR(size),
|
|
CHARGER_ATTR(data),
|
|
CHARGER_ATTR(update),
|
|
CHARGER_ATTR(ta_min_v),
|
|
};
|
|
static int chg_create_attrs(struct device *dev)
|
|
{
|
|
int i, rc;
|
|
|
|
for (i = 0; i < (int)ARRAY_SIZE(charger_attrs); i++) {
|
|
rc = device_create_file(dev, &charger_attrs[i]);
|
|
if (rc)
|
|
goto create_attrs_failed;
|
|
}
|
|
return rc;
|
|
|
|
create_attrs_failed:
|
|
dev_err(dev, "%s: failed (%d)\n", __func__, rc);
|
|
while (i--)
|
|
device_remove_file(dev, &charger_attrs[i]);
|
|
return rc;
|
|
}
|
|
|
|
static ssize_t chg_show_attrs(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct sm5451_charger *sm5451 = dev_get_drvdata(dev->parent);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
const ptrdiff_t offset = attr - charger_attrs;
|
|
int i = 0;
|
|
u8 addr;
|
|
u8 val;
|
|
|
|
switch (offset) {
|
|
case ADDR:
|
|
i += sprintf(buf, "0x%x\n", sm5451->addr);
|
|
break;
|
|
case SIZE:
|
|
i += sprintf(buf, "0x%x\n", sm5451->size);
|
|
break;
|
|
case DATA:
|
|
for (addr = sm5451->addr; addr < (sm5451->addr+sm5451->size); addr++) {
|
|
sm5451_read_reg(sm5451, addr, &val);
|
|
i += scnprintf(buf + i, PAGE_SIZE - i,
|
|
"0x%04x : 0x%02x\n", addr, val);
|
|
}
|
|
break;
|
|
case TA_MIN:
|
|
i += sprintf(buf, "%d\n", sm_dc->config.ta_min_voltage);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return i;
|
|
}
|
|
|
|
static ssize_t chg_store_attrs(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sm5451_charger *sm5451 = dev_get_drvdata(dev->parent);
|
|
struct sm_dc_info *sm_dc = select_sm_dc_info(sm5451);
|
|
const ptrdiff_t offset = attr - charger_attrs;
|
|
int ret = 0;
|
|
int x, y, z, k;
|
|
|
|
switch (offset) {
|
|
case ADDR:
|
|
if (sscanf(buf, "0x%4x\n", &x) == 1)
|
|
sm5451->addr = x;
|
|
ret = count;
|
|
break;
|
|
case SIZE:
|
|
if (sscanf(buf, "%5d\n", &x) == 1)
|
|
sm5451->size = x;
|
|
ret = count;
|
|
break;
|
|
case DATA:
|
|
if (sscanf(buf, "0x%8x 0x%8x", &x, &y) == 2) {
|
|
if ((x >= SM5451_REG_CNTL1 && x <= SM5451_REG_REG1) ||
|
|
(x >= SM5451_REG_ADC_CNTL && x <= SM5451_REG_TOPOFF)) {
|
|
u8 addr = x;
|
|
u8 data = y;
|
|
|
|
if (sm5451_write_reg(sm5451, addr, data) < 0) {
|
|
dev_info(sm5451->dev,
|
|
"%s: addr: 0x%x write fail\n", __func__, addr);
|
|
}
|
|
} else {
|
|
dev_info(sm5451->dev,
|
|
"%s: addr: 0x%x is wrong\n", __func__, x);
|
|
}
|
|
}
|
|
ret = count;
|
|
break;
|
|
case UPDATE:
|
|
if (sscanf(buf, "0x%8x 0x%8x 0x%8x %d", &x, &y, &z, &k) == 4) {
|
|
if ((x >= SM5451_REG_CNTL1 && x <= SM5451_REG_REG1) ||
|
|
(x >= SM5451_REG_ADC_CNTL && x <= SM5451_REG_TOPOFF)) {
|
|
u8 addr = x, data = y, val = z, pos = k;
|
|
|
|
if (sm5451_update_reg(sm5451, addr, data, val, pos)) {
|
|
dev_info(sm5451->dev,
|
|
"%s: addr: 0x%x write fail\n", __func__, addr);
|
|
}
|
|
} else {
|
|
dev_info(sm5451->dev,
|
|
"%s: addr: 0x%x is wrong\n", __func__, x);
|
|
}
|
|
}
|
|
ret = count;
|
|
break;
|
|
case TA_MIN:
|
|
if (sscanf(buf, "%5d\n", &x) == 1)
|
|
sm_dc->config.ta_min_voltage = x;
|
|
ret = count;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int sm5451_dbg_read_reg(void *data, u64 *val)
|
|
{
|
|
struct sm5451_charger *sm5451 = data;
|
|
int ret;
|
|
u8 reg;
|
|
|
|
ret = sm5451_read_reg(sm5451, sm5451->debug_address, ®);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: failed read 0x%02x\n",
|
|
__func__, sm5451->debug_address);
|
|
return ret;
|
|
}
|
|
*val = reg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_dbg_write_reg(void *data, u64 val)
|
|
{
|
|
struct sm5451_charger *sm5451 = data;
|
|
int ret;
|
|
|
|
ret = sm5451_write_reg(sm5451, sm5451->debug_address, (u8)val);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: failed write 0x%02x to 0x%02x\n",
|
|
__func__, (u8)val, sm5451->debug_address);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_SIMPLE_ATTRIBUTE(register_debug_ops, sm5451_dbg_read_reg,
|
|
sm5451_dbg_write_reg, "0x%02llx\n");
|
|
|
|
static int sm5451_create_debugfs_entries(struct sm5451_charger *sm5451)
|
|
{
|
|
struct dentry *ent;
|
|
|
|
sm5451->debug_root = debugfs_create_dir("charger-sm5451", NULL);
|
|
if (!sm5451->debug_root) {
|
|
dev_err(sm5451->dev, "%s: can't create dir\n", __func__);
|
|
return -ENOENT;
|
|
}
|
|
|
|
debugfs_create_x32("address", 0644,
|
|
sm5451->debug_root, &(sm5451->debug_address));
|
|
|
|
ent = debugfs_create_file("data", 0644,
|
|
sm5451->debug_root, sm5451, ®ister_debug_ops);
|
|
if (!ent) {
|
|
dev_err(sm5451->dev, "%s: can't create data\n", __func__);
|
|
return -ENOENT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id sm5451_charger_id_table[] = {
|
|
{ "sm5451-charger", .driver_data = SM5451_MAIN },
|
|
{ "sm5451-charger-sub", .driver_data = SM5451_SUB},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sm5451_charger_id_table);
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id sm5451_of_match_table[] = {
|
|
{ .compatible = "siliconmitus,sm5451", .data = (void *)SM5451_MAIN },
|
|
{ .compatible = "siliconmitus,sm5451-sub", .data = (void *)SM5451_SUB },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sm5451_of_match_table);
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int sm5451_charger_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct sm5451_charger *sm5451;
|
|
struct sm_dc_info *pps_dc, *x2bat_dc;
|
|
struct sm5451_platform_data *pdata;
|
|
struct power_supply_config psy_cfg = {};
|
|
const struct of_device_id *of_id;
|
|
int ret, chip;
|
|
|
|
dev_info(&i2c->dev, "%s: probe start\n", __func__);
|
|
|
|
of_id = of_match_device(sm5451_of_match_table, &i2c->dev);
|
|
if (!of_id) {
|
|
dev_info(&i2c->dev, "sm5451-Charger matching on node name, compatible is preferred\n");
|
|
chip = (enum sm5451_chip_id)id->driver_data;
|
|
} else {
|
|
chip = (enum sm5451_chip_id)of_id->data;
|
|
}
|
|
dev_info(&i2c->dev, "%s: chip:%d\n", __func__, chip);
|
|
|
|
sm5451 = devm_kzalloc(&i2c->dev, sizeof(struct sm5451_charger), GFP_KERNEL);
|
|
if (!sm5451)
|
|
return -ENOMEM;
|
|
|
|
#if defined(CONFIG_OF)
|
|
pdata = devm_kzalloc(&i2c->dev, sizeof(struct sm5451_platform_data), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
ret = sm5451_charger_parse_dt(&i2c->dev, pdata);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "%s: fail to parse_dt\n", __func__);
|
|
pdata = NULL;
|
|
}
|
|
#else /* CONFIG_OF */
|
|
pdata = NULL;
|
|
#endif /* CONFIG_OF */
|
|
if (!pdata) {
|
|
dev_err(&i2c->dev, "%s: we didn't support fixed platform_data yet\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* create sm direct-charging instance for PD3.0(PPS) */
|
|
if (chip == SM5451_SUB)
|
|
pps_dc = sm_dc_create_pd_instance("sm5451-sub-DC", i2c);
|
|
else
|
|
pps_dc = sm_dc_create_pd_instance("sm5451-PD-DC", i2c);
|
|
if (IS_ERR(pps_dc)) {
|
|
dev_err(&i2c->dev, "%s: fail to create PD-DC module\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
pps_dc->config.ta_min_current = SM5451_TA_MIN_CURRENT;
|
|
pps_dc->config.ta_min_voltage = 8200;
|
|
pps_dc->config.dc_min_vbat = 3100;
|
|
pps_dc->config.dc_vbus_ovp_th = 11000;
|
|
pps_dc->config.pps_lr = pdata->pps_lr;
|
|
pps_dc->config.rpara = 150000;
|
|
pps_dc->config.rsns = 0;
|
|
pps_dc->config.rpcm = pdata->rpcm;
|
|
pps_dc->config.r_ttl = pdata->r_ttl;
|
|
pps_dc->config.topoff_current = pdata->topoff;
|
|
pps_dc->config.need_to_sw_ocp = 0;
|
|
pps_dc->config.support_pd_remain = 1; /* if pdic can't support PPS remaining, plz activate it. */
|
|
pps_dc->config.chg_float_voltage = pdata->battery.chg_float_voltage;
|
|
pps_dc->config.sec_dc_name = pdata->battery.sec_dc_name;
|
|
pps_dc->ops = &sm5451_dc_pps_ops;
|
|
pps_dc->chip_id = chip;
|
|
ret = sm_dc_verify_configuration(pps_dc);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "%s: fail to verify sm_dc(ret=%d)\n", __func__, ret);
|
|
goto err_devmem;
|
|
}
|
|
sm5451->pps_dc = pps_dc;
|
|
|
|
if (pdata->x2bat_mode) {
|
|
if (chip == SM5451_SUB)
|
|
x2bat_dc = sm_dc_create_x2bat_instance("sm5451-x2sub-DC", i2c);
|
|
else
|
|
x2bat_dc = sm_dc_create_x2bat_instance("sm5451-x2PD-DC", i2c);
|
|
if (IS_ERR(x2bat_dc)) {
|
|
dev_err(&i2c->dev, "%s: fail to create PD-DC module\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
x2bat_dc->config.ta_min_current = SM5451_TA_MIN_CURRENT;
|
|
x2bat_dc->config.ta_min_voltage = 8200;
|
|
x2bat_dc->config.dc_min_vbat = 3100;
|
|
x2bat_dc->config.dc_vbus_ovp_th = 11000;
|
|
x2bat_dc->config.r_ttl = pdata->r_ttl;
|
|
x2bat_dc->config.topoff_current = pdata->topoff;
|
|
x2bat_dc->config.need_to_sw_ocp = 0;
|
|
x2bat_dc->config.support_pd_remain = 1; /* if pdic can't support PPS remaining, plz activate it. */
|
|
x2bat_dc->config.chg_float_voltage = pdata->battery.chg_float_voltage;
|
|
x2bat_dc->config.sec_dc_name = pdata->battery.sec_dc_name;
|
|
x2bat_dc->ops = &sm5451_x2bat_dc_pps_ops;
|
|
x2bat_dc->chip_id = chip;
|
|
ret = sm_dc_verify_configuration(x2bat_dc);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "%s: fail to verify sm_dc(ret=%d)\n", __func__, ret);
|
|
goto err_devmem;
|
|
}
|
|
} else {
|
|
x2bat_dc = NULL;
|
|
}
|
|
sm5451->x2bat_dc = x2bat_dc;
|
|
|
|
sm5451->dev = &i2c->dev;
|
|
sm5451->i2c = i2c;
|
|
sm5451->pdata = pdata;
|
|
sm5451->chip_id = chip;
|
|
mutex_init(&sm5451->i2c_lock);
|
|
mutex_init(&sm5451->pd_lock);
|
|
sm5451->chg_ws = wakeup_source_register(&i2c->dev, "sm5451-charger");
|
|
i2c_set_clientdata(i2c, sm5451);
|
|
|
|
sm5451_hw_init_config(sm5451);
|
|
|
|
psy_cfg.drv_data = sm5451;
|
|
psy_cfg.supplied_to = sm5451_supplied_to;
|
|
psy_cfg.num_supplicants = ARRAY_SIZE(sm5451_supplied_to);
|
|
if (chip == SM5451_SUB)
|
|
sm5451->psy_chg = power_supply_register(sm5451->dev,
|
|
&sm5451_charger_power_supply_sub_desc, &psy_cfg);
|
|
else
|
|
sm5451->psy_chg = power_supply_register(sm5451->dev,
|
|
&sm5451_charger_power_supply_desc, &psy_cfg);
|
|
if (IS_ERR(sm5451->psy_chg)) {
|
|
dev_err(sm5451->dev, "%s: fail to register psy_chg\n", __func__);
|
|
ret = PTR_ERR(sm5451->psy_chg);
|
|
goto err_devmem;
|
|
}
|
|
sec_chg_set_dev_init(SC_DEV_DIR_CHG);
|
|
|
|
if (sm5451->pdata->irq_gpio >= 0) {
|
|
ret = sm5451_irq_init(sm5451);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: fail to init irq(ret=%d)\n", __func__, ret);
|
|
goto err_psy_chg;
|
|
}
|
|
} else {
|
|
dev_warn(sm5451->dev, "%s: didn't assigned irq_gpio\n", __func__);
|
|
}
|
|
|
|
ret = chg_create_attrs(&sm5451->psy_chg->dev);
|
|
if (ret)
|
|
dev_err(sm5451->dev, "%s : Failed to create_attrs\n", __func__);
|
|
|
|
ret = sm5451_create_debugfs_entries(sm5451);
|
|
if (ret < 0) {
|
|
dev_err(sm5451->dev, "%s: fail to create debugfs(ret=%d)\n", __func__, ret);
|
|
goto err_psy_chg;
|
|
}
|
|
|
|
dev_info(sm5451->dev, "%s: done. (rev_id=0x%x)[%s]\n", __func__,
|
|
sm5451->pdata->rev_id, SM5451_DC_VERSION);
|
|
|
|
return 0;
|
|
|
|
err_psy_chg:
|
|
power_supply_unregister(sm5451->psy_chg);
|
|
|
|
err_devmem:
|
|
mutex_destroy(&sm5451->i2c_lock);
|
|
mutex_destroy(&sm5451->pd_lock);
|
|
wakeup_source_unregister(sm5451->chg_ws);
|
|
sm_dc_destroy_instance(sm5451->pps_dc);
|
|
sm_dc_destroy_instance(sm5451->x2bat_dc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sm5451_charger_remove(struct i2c_client *i2c)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
|
|
sm5451_stop_charging(sm5451);
|
|
sm5451_sw_reset(sm5451);
|
|
|
|
power_supply_unregister(sm5451->psy_chg);
|
|
mutex_destroy(&sm5451->i2c_lock);
|
|
mutex_destroy(&sm5451->pd_lock);
|
|
wakeup_source_unregister(sm5451->chg_ws);
|
|
sm_dc_destroy_instance(sm5451->pps_dc);
|
|
sm_dc_destroy_instance(sm5451->x2bat_dc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sm5451_charger_shutdown(struct i2c_client *i2c)
|
|
{
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
|
|
sm5451_stop_charging(sm5451);
|
|
sm5451_reverse_boost_enable(sm5451, false);
|
|
}
|
|
|
|
#if defined(CONFIG_PM)
|
|
static int sm5451_charger_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(sm5451->irq);
|
|
|
|
disable_irq(sm5451->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm5451_charger_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
|
|
struct sm5451_charger *sm5451 = i2c_get_clientdata(i2c);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(sm5451->irq);
|
|
|
|
enable_irq(sm5451->irq);
|
|
|
|
return 0;
|
|
}
|
|
#else /* CONFIG_PM */
|
|
#define sm5451_charger_suspend NULL
|
|
#define sm5451_charger_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
const struct dev_pm_ops sm5451_pm_ops = {
|
|
.suspend = sm5451_charger_suspend,
|
|
.resume = sm5451_charger_resume,
|
|
};
|
|
|
|
static struct i2c_driver sm5451_charger_driver = {
|
|
.driver = {
|
|
.name = "sm5451-charger",
|
|
.owner = THIS_MODULE,
|
|
#if defined(CONFIG_OF)
|
|
.of_match_table = sm5451_of_match_table,
|
|
#endif /* CONFIG_OF */
|
|
#if defined(CONFIG_PM)
|
|
.pm = &sm5451_pm_ops,
|
|
#endif /* CONFIG_PM */
|
|
},
|
|
.probe = sm5451_charger_probe,
|
|
.remove = sm5451_charger_remove,
|
|
.shutdown = sm5451_charger_shutdown,
|
|
.id_table = sm5451_charger_id_table,
|
|
};
|
|
|
|
static int __init sm5451_i2c_init(void)
|
|
{
|
|
pr_info("sm5451-charger: %s\n", __func__);
|
|
return i2c_add_driver(&sm5451_charger_driver);
|
|
}
|
|
module_init(sm5451_i2c_init);
|
|
|
|
static void __exit sm5451_i2c_exit(void)
|
|
{
|
|
i2c_del_driver(&sm5451_charger_driver);
|
|
}
|
|
module_exit(sm5451_i2c_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("SiliconMitus <hwangjoo.jang@SiliconMitus.com>");
|
|
MODULE_DESCRIPTION("Charger driver for SM5451");
|
|
MODULE_VERSION(SM5451_DC_VERSION);
|