kernel_samsung_a34x-permissive/drivers/input/touchscreen/new_tddi_9881x/ili9881x.h
2024-04-28 15:51:13 +02:00

1149 lines
32 KiB
C

/*
* ILITEK Touch IC driver
*
* Copyright (C) 2011 ILI Technology Corporation.
*
* Author: Dicky Chiang <dicky_chiang@ilitek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ILI9881X_H
#define __ILI9881X_H
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/kobject.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/version.h>
#include <linux/regulator/consumer.h>
#include <linux/power_supply.h>
#include <linux/fs.h>
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
#endif
#include <linux/uaccess.h>
#include <linux/cdev.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/netlink.h>
#include <linux/skbuff.h>
#include <linux/socket.h>
#include <net/sock.h>
#include <linux/sched.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/time.h>
#include <linux/namei.h>
#include <linux/vmalloc.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/rtc.h>
#include <linux/syscalls.h>
#include <linux/security.h>
#include <linux/mount.h>
#include <linux/firmware.h>
#ifdef CONFIG_OF
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#endif
#ifdef CONFIG_FB
#include <linux/notifier.h>
#include <linux/fb.h>
#else
#include <linux/earlysuspend.h>
#endif
#ifdef CONFIG_DRM_MSM
#include <linux/msm_drm_notify.h>
#endif
#ifdef CONFIG_MTK_SPI
#include "mt_spi.h"
#include "sync_write.h"
#endif
#define DRIVER_VERSION "3.0.3.0.200610"
/* Options */
#define TDDI_INTERFACE BUS_SPI /* BUS_I2C(0x18) or BUS_SPI(0x1C) */
#define VDD_VOLTAGE 1800000
#define VCC_VOLTAGE 1800000
#define SPI_CLK 9 /* follow by clk list */
#define SPI_RETRY 5
#define IRQ_GPIO_NUM 66
#define TR_BUF_SIZE (2*K) /* Buffer size of touch report */
#define TR_BUF_LIST_SIZE (1*K) /* Buffer size of touch report for debug data */
#define SPI_TX_BUF_SIZE 4096
#define SPI_RX_BUF_SIZE 4096
#define WQ_ESD_DELAY 4000
#define WQ_BAT_DELAY 2000
#define AP_INT_TIMEOUT 600 /*600ms*/
#define MP_INT_TIMEOUT 5000 /*5s*/
#define MT_B_TYPE ENABLE
#define TDDI_RST_BIND ENABLE
#define MT_PRESSURE DISABLE
#define ENABLE_WQ_ESD DISABLE
#define ENABLE_WQ_BAT DISABLE
#define ENABLE_GESTURE ENABLE
#define REGULATOR_POWER DISABLE
#define TP_SUSPEND_PRIO ENABLE
#define RESUME_BY_DDI DISABLE
#define BOOT_FW_UPDATE ENABLE
#define MP_INT_LEVEL DISABLE
#define PLL_CLK_WAKEUP_TP_RESUME DISABLE
#define CHARGER_NOTIFIER_CALLBACK DISABLE
/*if current interface is spi, must to hostdownload */
#if (TDDI_INTERFACE == BUS_SPI)
#define HOST_DOWN_LOAD ENABLE
#else
#define HOST_DOWN_LOAD DISABLE
#endif
/* Plaform compatibility */
#define CONFIG_PLAT_SPRD DISABLE
#define I2C_DMA_TRANSFER DISABLE
#define SPI_DMA_TRANSFER_SPLIT ENABLE
#define SPRD_SYSFS_SUSPEND_RESUME DISABLE
/* Path */
#define DEBUG_DATA_FILE_SIZE (10*K)
#define DEBUG_DATA_FILE_PATH "/sdcard/ILITEK_log.csv"
#define CSV_LCM_ON_PATH "/sdcard/ilitek_mp_lcm_on_log"
#define CSV_LCM_OFF_PATH "/sdcard/ilitek_mp_lcm_off_log"
#define POWER_STATUS_PATH "/sys/class/power_supply/battery/status"
#define DUMP_FLASH_PATH "/sdcard/flash_dump"
#define DUMP_IRAM_PATH "/sdcard/iram_dump"
/* Debug messages */
#define DEBUG_NONE 0
#define DEBUG_ALL 1
#define DEBUG_OUTPUT DEBUG_NONE
#define ILI_INFO(fmt, arg...) \
({ \
pr_info("ILITEK: (%s, %d): " fmt, __func__, __LINE__, ##arg); \
}) \
#define ILI_ERR(fmt, arg...) \
({ \
pr_err("ILITEK: (%s, %d): " fmt, __func__, __LINE__, ##arg); \
}) \
extern bool debug_en;
#define ILI_DBG(fmt, arg...) \
do { \
if (debug_en) \
pr_info("ILITEK: (%s, %d): " fmt, __func__, __LINE__, ##arg); \
} while (0)
#define ERR_ALLOC_MEM(X) ((IS_ERR(X) || X == NULL) ? 1 : 0)
#define K (1024)
#define M (K * K)
#define ENABLE 1
#define START 1
#define ON 1
#define ILI_WRITE 1
#define ILI_READ 0
#define DISABLE 0
#define END 0
#define OFF 0
#define NONE -1
#define DO_SPI_RECOVER -2
#define DO_I2C_RECOVER -3
enum TP_SPI_CLK_LIST {
TP_SPI_CLK_1M = 1000000,
TP_SPI_CLK_2M = 2000000,
TP_SPI_CLK_3M = 3000000,
TP_SPI_CLK_4M = 4000000,
TP_SPI_CLK_5M = 5000000,
TP_SPI_CLK_6M = 6000000,
TP_SPI_CLK_7M = 7000000,
TP_SPI_CLK_8M = 8000000,
TP_SPI_CLK_9M = 9000000,
TP_SPI_CLK_10M = 10000000,
TP_SPI_CLK_11M = 11000000,
TP_SPI_CLK_12M = 12000000,
TP_SPI_CLK_13M = 13000000,
TP_SPI_CLK_14M = 14000000,
TP_SPI_CLK_15M = 15000000,
};
enum TP_PLAT_TYPE {
TP_PLAT_MTK = 0,
TP_PLAT_QCOM
};
enum TP_RST_METHOD {
TP_IC_WHOLE_RST = 0,
TP_IC_CODE_RST,
TP_HW_RST_ONLY,
};
enum TP_FW_UPGRADE_TYPE {
UPGRADE_FLASH = 0,
UPGRADE_IRAM
};
enum TP_FW_UPGRADE_STATUS {
FW_STAT_INIT = 0,
FW_UPDATING = 90,
FW_UPDATE_PASS = 100,
FW_UPDATE_FAIL = -1
};
enum TP_FW_OPEN_METHOD {
REQUEST_FIRMWARE = 0,
FILP_OPEN
};
enum TP_SLEEP_STATUS {
TP_SUSPEND = 0,
TP_DEEP_SLEEP = 1,
TP_RESUME = 2
};
enum TP_PROXIMITY_STATUS {
DDI_POWER_OFF = 0,
DDI_POWER_ON = 1,
WAKE_UP_GESTURE_RECOVERY = 2,
WAKE_UP_SWITCH_GESTURE_MODE = 3
};
enum TP_SLEEP_CTRL {
SLEEP_IN = 0x0,
SLEEP_OUT = 0x1,
DEEP_SLEEP_IN = 0x3
};
enum TP_FW_BLOCK_NUM {
AP = 1,
DATA = 2,
TUNING = 3,
GESTURE = 4,
MP = 5,
DDI = 6,
TAG = 7,
PARA_BACKUP = 8,
RESERVE_BLOCK3 = 9,
RESERVE_BLOCK4 = 10,
RESERVE_BLOCK5 = 11,
RESERVE_BLOCK6 = 12,
RESERVE_BLOCK7 = 13,
RESERVE_BLOCK8 = 14,
RESERVE_BLOCK9 = 15,
RESERVE_BLOCK10 = 16,
};
enum TP_FW_BLOCK_TAG {
BLOCK_TAG_AF = 0xAF,
BLOCK_TAG_B0 = 0xB0
};
enum TP_WQ_TYPE {
WQ_ESD = 0,
WQ_BAT,
};
enum TP_RECORD_DATA {
DISABLE_RECORD = 0,
ENABLE_RECORD,
DATA_RECORD
};
enum TP_DATA_FORMAT {
DATA_FORMAT_DEMO = 0,
DATA_FORMAT_DEBUG,
DATA_FORMAT_DEMO_DEBUG_INFO,
DATA_FORMAT_GESTURE_SPECIAL_DEMO,
DATA_FORMAT_GESTURE_INFO,
DATA_FORMAT_GESTURE_NORMAL,
DATA_FORMAT_GESTURE_DEMO,
DATA_FORMAT_GESTURE_DEBUG,
DATA_FORMAT_DEBUG_LITE_ROI,
DATA_FORMAT_DEBUG_LITE_WINDOW,
DATA_FORMAT_DEBUG_LITE_AREA
};
enum NODE_MODE_SWITCH {
AP_MODE = 0,
TEST_MODE,
DEBUG_MODE,
DEBUG_LITE_ROI,
DEBUG_LITE_WINDOW,
DEBUG_LITE_AREA
};
enum TP_MODEL {
MODEL_DEF = 0,
MODEL_CSOT,
MODEL_AUO,
MODEL_BOE,
MODEL_INX,
MODEL_DJ,
MODEL_TXD,
MODEL_TM
};
enum TP_ERR_CODE {
EMP_CMD = 100,
EMP_PROTOCOL,
EMP_FILE,
EMP_INI,
EMP_TIMING_INFO,
EMP_INVAL,
EMP_PARSE,
EMP_NOMEM,
EMP_GET_CDC,
EMP_INT,
EMP_CHECK_BUY,
EMP_MODE,
EMP_FW_PROC,
EMP_FORMUL_NULL,
EMP_PARA_NULL,
EFW_CONVERT_FILE,
EFW_ICE_MODE,
EFW_CRC,
EFW_REST,
EFW_ERASE,
EFW_PROGRAM,
EFW_INTERFACE,
};
enum TP_IC_TYPE {
ILI_A = 0x0A,
ILI_B,
ILI_C,
ILI_D,
ILI_E,
ILI_F,
ILI_G,
ILI_H,
ILI_I,
ILI_J,
ILI_K,
ILI_L,
ILI_M,
ILI_N,
ILI_O,
ILI_P,
ILI_Q,
ILI_R,
ILI_S,
ILI_T,
ILI_U,
ILI_V,
ILI_W,
ILI_X,
ILI_Y,
ILI_Z,
};
struct gesture_symbol {
u8 double_tap :1;
u8 alphabet_line_2_top :1;
u8 alphabet_line_2_bottom :1;
u8 alphabet_line_2_left :1;
u8 alphabet_line_2_right :1;
u8 alphabet_m :1;
u8 alphabet_w :1;
u8 alphabet_c :1;
u8 alphabet_E :1;
u8 alphabet_V :1;
u8 alphabet_O :1;
u8 alphabet_S :1;
u8 alphabet_Z :1;
u8 alphabet_V_down :1;
u8 alphabet_V_left :1;
u8 alphabet_V_right :1;
u8 alphabet_two_line_2_bottom :1;
u8 alphabet_F :1;
u8 alphabet_AT :1;
u8 reserve0 :5;
};
struct report_info_block {
u8 nReportByPixel :1;
u8 nIsHostDownload :1;
u8 nIsSPIICE :1;
u8 nIsSPISLAVE :1;
u8 nIsI2C :1;
u8 nReserved00 :3;
u8 nReserved01 :8;
u8 nReserved02 :8;
u8 nReserved03 :8;
};
#define TDDI_I2C_ADDR 0x41
#define TDDI_DEV_ID "ILITEK_TDDI"
/* define the width and heigth of a screen. */
#define TOUCH_SCREEN_X_MIN 0
#define TOUCH_SCREEN_Y_MIN 0
#define TOUCH_SCREEN_X_MAX 720
#define TOUCH_SCREEN_Y_MAX 1440
#define MAX_TOUCH_NUM 10
/* define the range on panel */
#define TPD_HEIGHT 2048
#define TPD_WIDTH 2048
/* Firmware upgrade */
#define CORE_VER_1410 0x01040100
#define CORE_VER_1420 0x01040200
#define CORE_VER_1430 0x01040300
#define CORE_VER_1460 0x01040600
#define CORE_VER_1470 0x01040700
#define MAX_HEX_FILE_SIZE (160*K)
#define ILI_FILE_HEADER 256
#define DLM_START_ADDRESS 0x20610
#define DLM_HEX_ADDRESS 0x10000
#define MP_HEX_ADDRESS 0x13000
#define DDI_RSV_BK_ST_ADDR 0x1E000
#define DDI_RSV_BK_END_ADDR 0x1FFFF
#define DDI_RSV_BK_SIZE (1*K)
#define RSV_BK_ST_ADDR 0x1E000
#define RSV_BK_END_ADDR 0x1E3FF
#define FW_VER_ADDR 0xFFE0
#define FW_BLOCK_INFO_NUM 17
#define SPI_UPGRADE_LEN 2048
#define SPI_BUF_SIZE MAX_HEX_FILE_SIZE
#define INFO_HEX_ST_ADDR 0x4F
#define INFO_MP_HEX_ADDR 0x1F
#define INFO_CUSTOMER_INFO_HEX_ADDR 0x4B
/* DMA Control Registers */
#define DMA_BASED_ADDR 0x72000
#define DMA48_ADDR (DMA_BASED_ADDR + 0xC0)
#define DMA48_reg_dma_ch0_busy_flag DMA48_ADDR
#define DMA48_reserved_0 0xFFFE
#define DMA48_reg_dma_ch0_trigger_sel (BIT(16)|BIT(17)|BIT(18)|BIT(19))
#define DMA48_reserved_1 (BIT(20)|BIT(21)|BIT(22)|BIT(23))
#define DMA48_reg_dma_ch0_start_set BIT(24)
#define DMA48_reg_dma_ch0_start_clear BIT(25)
#define DMA48_reg_dma_ch0_trigger_src_mask BIT(26)
#define DMA48_reserved_2 BIT(27)
#define DMA49_ADDR (DMA_BASED_ADDR + 0xC4)
#define DMA49_reg_dma_ch0_src1_addr DMA49_ADDR
#define DMA49_reserved_0 BIT(20)
#define DMA50_ADDR (DMA_BASED_ADDR + 0xC8)
#define DMA50_reg_dma_ch0_src1_step_inc DMA50_ADDR
#define DMA50_reserved_0 (DMA50_ADDR + 0x01)
#define DMA50_reg_dma_ch0_src1_format (BIT(24)|BIT(25))
#define DMA50_reserved_1 (BIT(26)|BIT(27)|BIT(28)|BIT(29)|BIT(30))
#define DMA50_reg_dma_ch0_src1_en BIT(31)
#define DMA52_ADDR (DMA_BASED_ADDR + 0xD0)
#define DMA52_reg_dma_ch0_src2_step_inc DMA52_ADDR
#define DMA52_reserved_0 (DMA52_ADDR + 0x01)
#define DMA52_reg_dma_ch0_src2_format (BIT(24)|BIT(25))
#define DMA52_reserved_1 (BIT(26)|BIT(27)|BIT(28)|BIT(29)|BIT(30))
#define DMA52_reg_dma_ch0_src2_en BIT(31)
#define DMA53_ADDR (DMA_BASED_ADDR + 0xD4)
#define DMA53_reg_dma_ch0_dest_addr DMA53_ADDR
#define DMA53_reserved_0 BIT(20)
#define DMA54_ADDR (DMA_BASED_ADDR + 0xD8)
#define DMA54_reg_dma_ch0_dest_step_inc DMA54_ADDR
#define DMA54_reserved_0 (DMA54_ADDR + 0x01)
#define DMA54_reg_dma_ch0_dest_format (BIT(24)|BIT(25))
#define DMA54_reserved_1 (BIT(26)|BIT(27)|BIT(28)|BIT(29)|BIT(30))
#define DMA54_reg_dma_ch0_dest_en BIT(31)
#define DMA55_ADDR (DMA_BASED_ADDR + 0xDC)
#define DMA55_reg_dma_ch0_trafer_counts DMA55_ADDR
#define DMA55_reserved_0 (BIT(17)|BIT(18)|BIT(19)|BIT(20)|BIT(21)|BIT(22)|BIT(23))
#define DMA55_reg_dma_ch0_trafer_mode (BIT(24)|BIT(25)|BIT(26)|BIT(27))
#define DMA55_reserved_1 (BIT(28)|BIT(29)|BIT(30)|BIT(31))
/* INT Function Registers */
#define INTR_BASED_ADDR 0x48000
#define INTR1_ADDR (INTR_BASED_ADDR + 0x4)
#define INTR1_reg_uart_tx_int_flag INTR1_ADDR
#define INTR1_reserved_0 (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7))
#define INTR1_reg_wdt_alarm_int_flag BIT(8)
#define INTR1_reserved_1 (BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define INTR1_reg_dma_ch1_int_flag BIT(16)
#define INTR1_reg_dma_ch0_int_flag BIT(17)
#define INTR1_reg_dma_frame_done_int_flag BIT(18)
#define INTR1_reg_dma_tdi_done_int_flag BIT(19)
#define INTR1_reserved_2 (BIT(20)|BIT(21)|BIT(22)|BIT(23))
#define INTR1_reg_flash_error_flag BIT(24)
#define INTR1_reg_flash_int_flag BIT(25)
#define INTR1_reserved_3 BIT(26)
#define INTR2_ADDR (INTR_BASED_ADDR + 0x8)
#define INTR2_td_int_flag_clear INTR2_ADDR
#define INTR2_td_timeout_int_flag_clear BIT(1)
#define INTR2_td_debug_frame_done_int_flag_clear BIT(2)
#define INTR2_td_frame_start_scan_int_flag_clear BIT(3)
#define INTR2_log_int_flag_clear BIT(4)
#define INTR2_d2t_crc_err_int_flag_clear BIT(8)
#define INTR2_d2t_flash_req_int_flag_clear BIT(9)
#define INTR2_d2t_ddi_int_flag_clear BIT(10)
#define INTR2_wr_done_int_flag_clear BIT(16)
#define INTR2_rd_done_int_flag_clear BIT(17)
#define INTR2_tdi_err_int_flag_clear BIT(18)
#define INTR2_d2t_slpout_rise_flag_clear BIT(24)
#define INTR2_d2t_slpout_fall_flag_clear BIT(25)
#define INTR2_d2t_dstby_flag_clear BIT(26)
#define INTR2_ddi_pwr_rdy_flag_clear BIT(27)
#define INTR32_ADDR (INTR_BASED_ADDR + 0x80)
#define INTR32_reg_ice_sw_int_en INTR32_ADDR
#define INTR32_reg_ice_apb_conflict_int_en BIT(1)
#define INTR32_reg_ice_ilm_conflict_int_en BIT(2)
#define INTR32_reg_ice_dlm_conflict_int_en BIT(3)
#define INTR32_reserved_0 (BIT(4)|BIT(5)|BIT(6)|BIT(7))
#define INTR32_reg_spi_sr_int_en BIT(8)
#define INTR32_reg_spi_sp_int_en BIT(9)
#define INTR32_reg_spi_trx_int_en BIT(10)
#define INTR32_reg_spi_cmd_int_en BIT(11)
#define INTR32_reg_spi_rw_int_en BIT(12)
#define INTR32_reserved_1 (BIT(13)|BIT(14)|BIT(15))
#define INTR32_reg_i2c_start_int_en BIT(16)
#define INTR32_reg_i2c_addr_match_int_en BIT(17)
#define INTR32_reg_i2c_cmd_int_en BIT(18)
#define INTR32_reg_i2c_sr_int_en BIT(19)
#define INTR32_reg_i2c_trx_int_en BIT(20)
#define INTR32_reg_i2c_rx_stop_int_en BIT(21)
#define INTR32_reg_i2c_tx_stop_int_en BIT(22)
#define INTR32_reserved_2 BIT(23)
#define INTR32_reg_t0_int_en BIT(24)
#define INTR32_reg_t1_int_en BIT(25)
#define INTR32_reserved_3 (BIT(26)|BIT(27)|BIT(28)|BIT(29)|BIT(30)|BIT(31))
#define INTR33_ADDR (INTR_BASED_ADDR + 0x84)
#define INTR33_reg_uart_tx_int_en INTR33_ADDR
#define INTR33_reserved_0 (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7))
#define INTR33_reg_wdt_alarm_int_en BIT(8)
#define INTR33_reserved_1 (BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define INTR33_reg_dma_ch1_int_en BIT(16)
#define INTR33_reg_dma_ch0_int_en BIT(17)
#define INTR33_reg_dma_frame_done_int_en BIT(18)
#define INTR33_reg_dma_tdi_done_int_en BIT(19)
#define INTR33_reserved_2 (BIT(20)|BIT(21)|BIT(22)|BIT(23))
#define INTR33_reg_flash_error_en BIT(24)
#define INTR33_reg_flash_int_en BIT(25)
#define INTR33_reserved_3 (BIT(26)|BIT(27)|BIT(28)|BIT(29)|BIT(30)|BIT(31))
/* Flash */
#define FLASH_BASED_ADDR 0x41000
#define FLASH0_ADDR (FLASH_BASED_ADDR + 0x0)
#define FLASH0_reg_flash_csb FLASH0_ADDR
#define FLASH0_reserved_0 (BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define FLASH0_reg_preclk_sel (BIT(16)|BIT(17)|BIT(18)|BIT(19)|BIT(20)|BIT(21)|BIT(22)|BIT(23))
#define FLASH0_reg_rx_dual BIT(24)
#define FLASH0_reg_tx_dual BIT(25)
#define FLASH0_reserved_26 (BIT(26)|BIT(27)|BIT(28)|BIT(29)|BIT(30)|BIT(31))
#define FLASH1_ADDR (FLASH_BASED_ADDR + 0x4)
#define FLASH1_reg_flash_key1 FLASH1_ADDR
#define FLASH1_reg_flash_key2 (FLASH1_ADDR + 0x01)
#define FLASH1_reg_flash_key3 (FLASH1_ADDR + 0x02)
#define FLASH1_reserved_0 (FLASH1_ADDR + 0x03)
#define FLASH2_ADDR (FLASH_BASED_ADDR + 0x8)
#define FLASH2_reg_tx_data FLASH2_ADDR
#define FLASH3_ADDR (FLASH_BASED_ADDR + 0xC)
#define FLASH3_reg_rcv_cnt FLASH3_ADDR
#define FLASH4_ADDR (FLASH_BASED_ADDR + 0x10)
#define FLASH4_reg_rcv_data FLASH4_ADDR
#define FLASH4_reg_rcv_dly BIT(8)
#define FLASH4_reg_sutrg_en BIT(9)
#define FLASH4_reserved_1 (BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define FLASH4_reg_rcv_data_valid_state BIT(16)
#define FLASH4_reg_flash_rd_finish_state BIT(17)
#define FLASH4_reserved_2 (BIT(18)|BIT(19)|BIT(20)|BIT(21)|BIT(22)|BIT(23))
#define FLASH4_reg_flash_dma_trigger_en (BIT(24)|BIT(25)|BIT(26)|BIT(27)|BIT(28)|BIT(29)|BIT(30)|BIT(31))
/* Dummy Registers */
#define WDT_DUMMY_BASED_ADDR 0x5101C
#define WDT7_DUMMY0 WDT_DUMMY_BASED_ADDR
#define WDT8_DUMMY1 (WDT_DUMMY_BASED_ADDR + 0x04)
#define WDT9_DUMMY2 (WDT_DUMMY_BASED_ADDR + 0x08)
/* The example for the gesture virtual keys */
#define GESTURE_DOUBLECLICK 0x58
#define GESTURE_UP 0x60
#define GESTURE_DOWN 0x61
#define GESTURE_LEFT 0x62
#define GESTURE_RIGHT 0x63
#define GESTURE_M 0x64
#define GESTURE_W 0x65
#define GESTURE_C 0x66
#define GESTURE_E 0x67
#define GESTURE_V 0x68
#define GESTURE_O 0x69
#define GESTURE_S 0x6A
#define GESTURE_Z 0x6B
#define KEY_GESTURE_POWER KEY_POWER
#define KEY_GESTURE_UP KEY_UP
#define KEY_GESTURE_DOWN KEY_DOWN
#define KEY_GESTURE_LEFT KEY_LEFT
#define KEY_GESTURE_RIGHT KEY_RIGHT
#define KEY_GESTURE_O KEY_O
#define KEY_GESTURE_E KEY_E
#define KEY_GESTURE_M KEY_M
#define KEY_GESTURE_W KEY_W
#define KEY_GESTURE_S KEY_S
#define KEY_GESTURE_V KEY_V
#define KEY_GESTURE_C KEY_C
#define KEY_GESTURE_Z KEY_Z
#define KEY_GESTURE_F KEY_F
#define GESTURE_V_DOWN 0x6C
#define GESTURE_V_LEFT 0x6D
#define GESTURE_V_RIGHT 0x6E
#define GESTURE_TWOLINE_DOWN 0x6F
#define GESTURE_F 0x70
#define GESTURE_AT 0x71
#define ESD_GESTURE_PWD 0xF38A94EF
#define SPI_ESD_GESTURE_RUN 0xA67C9DFE
#define I2C_ESD_GESTURE_RUN 0xA67C9DFE
#define SPI_ESD_GESTURE_PWD_ADDR 0x25FF8
#define I2C_ESD_GESTURE_PWD_ADDR 0x40054
#define ESD_GESTURE_CORE146_PWD 0xF38A
#define SPI_ESD_GESTURE_CORE146_RUN 0xA67C
#define I2C_ESD_GESTURE_CORE146_RUN 0xA67C
#define SPI_ESD_GESTURE_CORE146_PWD_ADDR 0x4005C
#define I2C_ESD_GESTURE_CORE146_PWD_ADDR 0x4005C
#define DOUBLE_TAP ( ON )//BIT0
#define ALPHABET_LINE_2_TOP ( ON )//BIT1
#define ALPHABET_LINE_2_BOTTOM ( ON )//BIT2
#define ALPHABET_LINE_2_LEFT ( ON )//BIT3
#define ALPHABET_LINE_2_RIGHT ( ON )//BIT4
#define ALPHABET_M ( ON )//BIT5
#define ALPHABET_W ( ON )//BIT6
#define ALPHABET_C ( ON )//BIT7
#define ALPHABET_E ( ON )//BIT8
#define ALPHABET_V ( ON )//BIT9
#define ALPHABET_O ( ON )//BIT10
#define ALPHABET_S ( ON )//BIT11
#define ALPHABET_Z ( ON )//BIT12
#define ALPHABET_V_DOWN ( ON )//BIT13
#define ALPHABET_V_LEFT ( ON )//BIT14
#define ALPHABET_V_RIGHT ( ON )//BIT15
#define ALPHABET_TWO_LINE_2_BOTTOM ( ON )//BIT16
#define ALPHABET_F ( ON )//BIT17
#define ALPHABET_AT ( ON )//BIT18
/* FW data format */
#define DATA_FORMAT_DEMO_CMD 0x00
#define DATA_FORMAT_DEBUG_CMD 0x02
#define DATA_FORMAT_DEMO_DEBUG_INFO_CMD 0x04
#define DATA_FORMAT_GESTURE_NORMAL_CMD 0x01
#define DATA_FORMAT_GESTURE_INFO_CMD 0x02
#define DATA_FORMAT_DEBUG_LITE_CMD 0x05
#define DATA_FORMAT_DEBUG_LITE_ROI_CMD 0x01
#define DATA_FORMAT_DEBUG_LITE_WINDOW_CMD 0x02
#define DATA_FORMAT_DEBUG_LITE_AREA_CMD 0x03
#define P5_X_DEMO_MODE_PACKET_LEN 43
#define P5_X_INFO_HEADER_LENGTH 3
#define P5_X_INFO_CHECKSUM_LENGTH 1
#define P5_X_DEMO_DEBUG_INFO_ID0_LENGTH 14
#define P5_X_DEBUG_MODE_PACKET_LENGTH 1280
#define P5_X_TEST_MODE_PACKET_LENGTH 1180
#define P5_X_GESTURE_NORMAL_LENGTH 8
#define P5_X_GESTURE_INFO_LENGTH 170
#define P5_X_DEBUG_LITE_LENGTH 300
#define P5_X_CORE_VER_THREE_LENGTH 5
#define P5_X_CORE_VER_FOUR_LENGTH 6
/* Protocol */
#define PROTOCOL_VER_500 0x050000
#define PROTOCOL_VER_510 0x050100
#define PROTOCOL_VER_520 0x050200
#define PROTOCOL_VER_530 0x050300
#define PROTOCOL_VER_540 0x050400
#define PROTOCOL_VER_550 0x050500
#define PROTOCOL_VER_560 0x050600
#define PROTOCOL_VER_570 0x050700
#define P5_X_READ_DATA_CTRL 0xF6
#define P5_X_GET_TP_INFORMATION 0x20
#define P5_X_GET_KEY_INFORMATION 0x27
#define P5_X_GET_PANEL_INFORMATION 0x29
#define P5_X_GET_FW_VERSION 0x21
#define P5_X_GET_PROTOCOL_VERSION 0x22
#define P5_X_GET_CORE_VERSION 0x23
#define P5_X_GET_CORE_VERSION_NEW 0x24
#define P5_X_MODE_CONTROL 0xF0
#define P5_X_SET_CDC_INIT 0xF1
#define P5_X_GET_CDC_DATA 0xF2
#define P5_X_CDC_BUSY_STATE 0xF3
#define P5_X_MP_TEST_MODE_INFO 0xFE
#define P5_X_I2C_UART 0x40
#define CMD_GET_FLASH_DATA 0x41
#define CMD_CTRL_INT_ACTION 0x1B
#define P5_X_FW_UNKNOWN_MODE 0xFF
#define P5_X_FW_AP_MODE 0x00
#define P5_X_FW_TEST_MODE 0x01
#define P5_X_FW_GESTURE_MODE 0x0F
#define P5_X_FW_DELTA_DATA_MODE 0x03
#define P5_X_FW_RAW_DATA_MODE 0x08
#define P5_X_DEMO_PACKET_ID 0x5A
#define P5_X_DEBUG_PACKET_ID 0xA7
#define P5_X_TEST_PACKET_ID 0xF2
#define P5_X_GESTURE_PACKET_ID 0xAA
#define P5_X_GESTURE_FAIL_ID 0xAE
#define P5_X_I2CUART_PACKET_ID 0x7A
#define P5_X_DEBUG_LITE_PACKET_ID 0x9A
#define P5_X_SLAVE_MODE_CMD_ID 0x5F
#define P5_X_INFO_HEADER_PACKET_ID 0xB7
#define P5_X_DEMO_DEBUG_INFO_PACKET_ID 0x5C
#define P5_X_EDGE_PLAM_CTRL_1 0x01
#define P5_X_EDGE_PLAM_CTRL_2 0x12
#define SPI_WRITE 0x82
#define SPI_READ 0x83
#define SPI_ACK 0xA3
/* Chips */
#define ILI9881_CHIP 0x9881
#define ILI7807_CHIP 0x7807
#define ILI9881N_AA 0x98811700
#define ILI9881O_AA 0x98811800
#define ILI9882_CHIP 0x9882
#define TDDI_PID_ADDR 0x4009C
#define TDDI_OTP_ID_ADDR 0x400A0
#define TDDI_ANA_ID_ADDR 0x400A4
#define TDDI_PC_COUNTER_ADDR 0x44008
#define TDDI_PC_LATCH_ADDR 0x51010
#define TDDI_CHIP_RESET_ADDR 0x40050
#define RAWDATA_NO_BK_SHIFT 8192
struct ilitek_ts_data {
struct i2c_client *i2c;
struct spi_device *spi;
struct input_dev *input;
struct device *dev;
struct wakeup_source *ws;
struct ilitek_hwif_info *hwif;
struct ilitek_ic_info *chip;
struct ilitek_protocol_info *protocol;
struct gesture_coordinate *gcoord;
struct regulator *vdd;
struct regulator *vcc;
#ifdef CONFIG_FB
struct notifier_block notifier_fb;
#else
struct early_suspend early_suspend;
#endif
#if CHARGER_NOTIFIER_CALLBACK
#if KERNEL_VERSION(4, 1, 0) <= LINUX_VERSION_CODE
/* add_for_charger_start */
struct notifier_block notifier_charger;
struct workqueue_struct *charger_notify_wq;
struct work_struct update_charger;
int usb_plug_status;
/* add_for_charger_end */
#endif
#endif
struct mutex touch_mutex;
struct mutex debug_mutex;
struct mutex debug_read_mutex;
spinlock_t irq_spin;
struct completion pm_completion;
bool pm_suspend;
/* physical path to the input device in the system hierarchy */
const char *phys;
bool boot;
u32 fw_pc;
u32 fw_latch;
u16 max_x;
u16 max_y;
u16 min_x;
u16 min_y;
u16 panel_wid;
u16 panel_hei;
u8 xch_num;
u8 ych_num;
u8 stx;
u8 srx;
u8 *update_buf;
u8 *tr_buf;
u8 *spi_tx;
u8 *spi_rx;
struct firmware tp_fw;
int actual_tp_mode;
int tp_data_mode;
int tp_data_format;
int tp_data_len;
int irq_num;
int irq_gpio;
int irq_tirgger_type;
int tp_rst;
int tp_int;
int wait_int_timeout;
int finger;
int curt_touch[MAX_TOUCH_NUM];
int prev_touch[MAX_TOUCH_NUM];
int last_touch;
int fw_retry;
int fw_update_stat;
int fw_open;
u8 fw_info[75];
u8 fw_mp_ver[4];
u8 fw_customer_info[36];
bool wq_ctrl;
bool wq_esd_ctrl;
bool wq_bat_ctrl;
bool netlink;
bool report;
bool gesture;
bool mp_retry;
int gesture_mode;
int gesture_demo_ctrl;
struct gesture_symbol ges_sym;
struct report_info_block rib;
u16 flash_mid;
u16 flash_devid;
int program_page;
int flash_sector;
/* Sending report data to users for the debug */
bool dnp; //debug node open
int dbf; //debug data frame
int odi; //out data index
wait_queue_head_t inq;
struct debug_buf_list *dbl;
int raw_count;
int delta_count;
int bg_count;
int reset;
int rst_edge_delay;
int fw_upgrade_mode;
int mp_ret_len;
bool wtd_ctrl;
bool force_fw_update;
bool irq_after_recovery;
bool ddi_rest_done;
bool resume_by_ddi;
bool tp_suspend;
bool info_from_hex;
bool prox_near;
bool gesture_load_code;
bool trans_xy;
bool ss_ctrl;
bool node_update;
bool int_pulse;
bool pll_clk_wakeup;
/* module info */
int tp_module;
int md_fw_ili_size;
char *md_name;
char *md_fw_filp_path;
char *md_fw_rq_path;
char *md_ini_path;
char *md_ini_rq_path;
u8 *md_fw_ili;
atomic_t irq_stat;
atomic_t tp_reset;
atomic_t ice_stat;
atomic_t fw_stat;
atomic_t mp_stat;
atomic_t tp_sleep;
atomic_t tp_sw_mode;
atomic_t cmd_int_check;
atomic_t esd_stat;
/* Event for driver test */
struct completion esd_done;
int (*spi_write_then_read)(struct spi_device *spi, const void *txbuf,
unsigned n_tx, void *rxbuf, unsigned n_rx);
int (*wrapper)(u8* wdata, u32 wlen, u8* rdata, u32 rlen, bool spi_irq, bool i2c_irq);
int (*mp_move_code)(void);
int (*gesture_move_code)(int mode);
int (*esd_recover)(void);
int (*ges_recover)(void);
void (*demo_debug_info[5])(u8 *, size_t);
int (*detect_int_stat)(bool status);
};
extern struct ilitek_ts_data *ilits;
struct debug_buf_list {
bool mark;
unsigned char *data;
};
struct ilitek_touch_info {
u16 id;
u16 x;
u16 y;
u16 pressure;
};
struct gesture_coordinate {
u16 code;
u8 clockwise;
int type;
struct ilitek_touch_info pos_start;
struct ilitek_touch_info pos_end;
struct ilitek_touch_info pos_1st;
struct ilitek_touch_info pos_2nd;
struct ilitek_touch_info pos_3rd;
struct ilitek_touch_info pos_4th;
};
struct ilitek_protocol_info {
u32 ver;
int fw_ver_len;
int pro_ver_len;
int tp_info_len;
int key_info_len;
int panel_info_len;
int core_ver_len;
int func_ctrl_len;
int window_len;
int cdc_len;
int mp_info_len;
};
struct ilitek_ic_func_ctrl {
const char *name;
u8 cmd[6];
int len;
u8 def_cmd;
u8 rec_state; //0:disable, 1: enable, 2: ignore record
u8 rec_cmd;
};
struct ilitek_ic_info {
u8 type;
u8 ver;
u16 id;
u32 pid;
u32 pid_addr;
u32 pc_counter_addr;
u32 pc_latch_addr;
u32 reset_addr;
u32 otp_addr;
u32 ana_addr;
u32 otp_id;
u32 ana_id;
u32 fw_ver;
u32 core_ver;
u32 fw_mp_ver;
u32 max_count;
u32 reset_key;
u16 wtd_key;
int no_bk_shift;
bool dma_reset;
int (*dma_crc)(u32 start_addr, u32 block_size);
};
struct ilitek_hwif_info {
u8 bus_type;
u8 plat_type;
const char *name;
struct module *owner;
const struct of_device_id *of_match_table;
const struct dev_pm_ops *pm;
int (*plat_probe)(void);
int (*plat_remove)(void);
void *info;
};
/* Prototypes for tddi firmware/flash functions */
extern void ili_flash_dma_write(u32 start, u32 end, u32 len);
extern void ili_flash_clear_dma(void);
extern void ili_fw_read_flash_info(bool mcu);
extern u32 ili_fw_read_hw_crc(u32 start, u32 end, u32 *flash_crc);
extern int ili_fw_read_flash(u32 start, u32 end, u8 *data, int len);
extern int ili_fw_dump_iram_data(u32 start, u32 end, bool save, bool mcu);
extern int ili_fw_dump_flash_data(u32 start, u32 end, bool user, bool mcu);
extern int ili_fw_upgrade(int op);
/* Prototypes for tddi mp test */
extern int ili_mp_test_main(char *apk, bool lcm_on);
/* Prototypes for tddi core functions */
extern int ili_touch_esd_gesture_flash(void);
extern int ili_touch_esd_gesture_iram(void);
extern void ili_set_gesture_symbol(void);
extern int ili_move_gesture_code_flash(int mode);
extern int ili_move_gesture_code_iram(int mode);
extern int ili_move_mp_code_flash(void);
extern int ili_move_mp_code_iram(void);
extern void ili_touch_press(u16 x, u16 y, u16 pressure, u16 id);
extern void ili_touch_release(u16 x, u16 y, u16 id);
extern void ili_touch_release_all_point(void);
extern void ili_report_ap_mode(u8 *buf, int len);
extern void ili_report_debug_mode(u8 *buf, int rlen);
extern void ili_report_debug_lite_mode(u8 *buf, int rlen);
extern void ili_report_gesture_mode(u8 *buf, int rlen);
extern void ili_report_i2cuart_mode(u8 *buf, int rlen);
extern void ili_ic_set_ddi_reg_onepage(u8 page, u8 reg, u8 data, bool mcu);
extern void ili_ic_get_ddi_reg_onepage(u8 page, u8 reg, u8 *data, bool mcu);
extern int ili_ic_whole_reset(bool mcu);
extern int ili_ic_code_reset(bool mcu);
extern int ili_ic_func_ctrl(const char *name, int ctrl);
extern void ili_ic_func_ctrl_reset(void);
extern int ili_ic_int_trigger_ctrl(bool pulse);
extern void ili_ic_get_pc_counter(int stat);
extern int ili_ic_check_int_level(bool level);
extern int ili_ic_check_int_pulse(bool pulse);
extern int ili_ic_check_busy(int count, int delay);
extern int ili_ic_get_project_id(u8 *pdata, int size);
extern int ili_ic_get_panel_info(void);
extern int ili_ic_get_tp_info(void);
extern int ili_ic_get_core_ver(void);
extern int ili_ic_get_protocl_ver(void);
extern int ili_ic_get_fw_ver(void);
extern int ili_ic_get_info(void);
extern int ili_ic_dummy_check(void);
extern int ili_ice_mode_bit_mask_write(u32 addr, u32 mask, u32 value);
extern int ili_ice_mode_write(u32 addr, u32 data, int len);
extern int ili_ice_mode_read(u32 addr, u32 *data, int len);
extern int ili_ice_mode_ctrl(bool enable, bool mcu);
extern void ili_ic_init(void);
extern void ili_fw_uart_ctrl(u8 ctrl);
/* Prototypes for tddi events */
#if RESUME_BY_DDI
extern void ili_resume_by_ddi(void);
#endif
extern int ili_proximity_far(int mode);
extern int ili_proximity_near(int mode);
extern int ili_switch_tp_mode(u8 data);
extern int ili_set_tp_data_len(int format, bool send, u8* data);
extern int ili_fw_upgrade_handler(void *data);
extern int ili_wq_esd_i2c_check(void);
extern int ili_wq_esd_spi_check(void);
extern int ili_gesture_recovery(void);
extern void ili_spi_recovery(void);
extern void ili_wq_ctrl(int type, int ctrl);
extern int ili_mp_test_handler(char *apk, bool lcm_on);
extern int ili_report_handler(void);
extern int ili_sleep_handler(int mode);
extern int ili_reset_ctrl(int mode);
extern int ili_tddi_init(void);
extern int ili_dev_init(struct ilitek_hwif_info *hwif);
extern void ili_dev_remove(void);
/* Prototypes for i2c/spi interface */
extern int ili_core_spi_setup(int num);
extern int ili_interface_dev_init(struct ilitek_hwif_info *hwif);
extern void ili_interface_dev_exit(struct ilitek_ts_data *ts);
extern int ili_spi_write_then_read_split(struct spi_device *spi,
const void *txbuf, unsigned n_tx,
void *rxbuf, unsigned n_rx);
extern int ili_spi_write_then_read_direct(struct spi_device *spi,
const void *txbuf, unsigned n_tx,
void *rxbuf, unsigned n_rx);
/* Prototypes for platform level */
extern void ili_plat_regulator_power_on(bool status);
extern void ili_input_register(void);
extern void ili_irq_disable(void);
extern void ili_irq_enable(void);
extern void ili_tp_reset(void);
extern void ili_irq_unregister(void);
extern int ili_irq_register(int type);
/* Prototypes for miscs */
extern void ili_node_init(void);
extern void ili_dump_data(void *data, int type, int len, int row_len, const char *name);
extern u8 ili_calc_packet_checksum(u8 *packet, int len);
extern void ili_netlink_reply_msg(void *raw, int size);
extern int ili_katoi(char *str);
extern int ili_str2hex(char *str);
extern int ili_mp_read_write(u8* wdata, u32 wlen, u8* rdata, u32 rlen);
/* Prototypes for additional functionalities */
extern void ili_gesture_fail_reason(bool enable);
extern int ili_get_tp_recore_ctrl(int data);
extern int ili_get_tp_recore_data(bool mcu);
extern void ili_demo_debug_info_mode(u8 *buf, size_t rlen);
extern void ili_demo_debug_info_id0(u8 *buf, size_t len);
static inline void ipio_kfree(void **mem)
{
if (*mem != NULL) {
kfree(*mem);
*mem = NULL;
}
}
static inline void ipio_vfree(void **mem)
{
if (*mem != NULL) {
vfree(*mem);
*mem = NULL;
}
}
static inline void *ipio_memcpy(void *dest, const void *src, int n, int dest_size)
{
if (n > dest_size)
n = dest_size;
return memcpy(dest, src, n);
}
static inline int ipio_strcmp(const char *s1, const char *s2)
{
return (strlen(s1) != strlen(s2)) ? -1 : strncmp(s1, s2, strlen(s1));
}
#endif /* __ILI9881X_H */