1197 lines
34 KiB
C
1197 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright(c) 1999 - 2018 Intel Corporation. */
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include "ixgbe.h"
|
|
#include "ixgbe_phy.h"
|
|
|
|
#define IXGBE_82598_MAX_TX_QUEUES 32
|
|
#define IXGBE_82598_MAX_RX_QUEUES 64
|
|
#define IXGBE_82598_RAR_ENTRIES 16
|
|
#define IXGBE_82598_MC_TBL_SIZE 128
|
|
#define IXGBE_82598_VFT_TBL_SIZE 128
|
|
#define IXGBE_82598_RX_PB_SIZE 512
|
|
|
|
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete);
|
|
static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 *eeprom_data);
|
|
|
|
/**
|
|
* ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* The defaults for 82598 should be in the range of 50us to 50ms,
|
|
* however the hardware default for these parts is 500us to 1ms which is less
|
|
* than the 10ms recommended by the pci-e spec. To address this we need to
|
|
* increase the value to either 10ms to 250ms for capability version 1 config,
|
|
* or 16ms to 55ms for version 2.
|
|
**/
|
|
static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
|
|
{
|
|
u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
|
|
u16 pcie_devctl2;
|
|
|
|
if (ixgbe_removed(hw->hw_addr))
|
|
return;
|
|
|
|
/* only take action if timeout value is defaulted to 0 */
|
|
if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
|
|
goto out;
|
|
|
|
/*
|
|
* if capababilities version is type 1 we can write the
|
|
* timeout of 10ms to 250ms through the GCR register
|
|
*/
|
|
if (!(gcr & IXGBE_GCR_CAP_VER2)) {
|
|
gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* for version 2 capabilities we need to write the config space
|
|
* directly in order to set the completion timeout value for
|
|
* 16ms to 55ms
|
|
*/
|
|
pcie_devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2);
|
|
pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
|
|
ixgbe_write_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
|
|
out:
|
|
/* disable completion timeout resend */
|
|
gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
|
|
IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
|
|
}
|
|
|
|
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
|
|
{
|
|
struct ixgbe_mac_info *mac = &hw->mac;
|
|
|
|
/* Call PHY identify routine to get the phy type */
|
|
ixgbe_identify_phy_generic(hw);
|
|
|
|
mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
|
|
mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
|
|
mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
|
|
mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE;
|
|
mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
|
|
mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
|
|
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_phy_ops_82598 - PHY/SFP specific init
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Initialize any function pointers that were not able to be
|
|
* set during get_invariants because the PHY/SFP type was
|
|
* not known. Perform the SFP init if necessary.
|
|
*
|
|
**/
|
|
static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
|
|
{
|
|
struct ixgbe_mac_info *mac = &hw->mac;
|
|
struct ixgbe_phy_info *phy = &hw->phy;
|
|
s32 ret_val;
|
|
u16 list_offset, data_offset;
|
|
|
|
/* Identify the PHY */
|
|
phy->ops.identify(hw);
|
|
|
|
/* Overwrite the link function pointers if copper PHY */
|
|
if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
|
|
mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
|
|
mac->ops.get_link_capabilities =
|
|
&ixgbe_get_copper_link_capabilities_generic;
|
|
}
|
|
|
|
switch (hw->phy.type) {
|
|
case ixgbe_phy_tn:
|
|
phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
|
|
phy->ops.check_link = &ixgbe_check_phy_link_tnx;
|
|
break;
|
|
case ixgbe_phy_nl:
|
|
phy->ops.reset = &ixgbe_reset_phy_nl;
|
|
|
|
/* Call SFP+ identify routine to get the SFP+ module type */
|
|
ret_val = phy->ops.identify_sfp(hw);
|
|
if (ret_val)
|
|
return ret_val;
|
|
if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
|
|
/* Check to see if SFP+ module is supported */
|
|
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
|
|
&list_offset,
|
|
&data_offset);
|
|
if (ret_val)
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Starts the hardware using the generic start_hw function.
|
|
* Disables relaxed ordering for archs other than SPARC
|
|
* Then set pcie completion timeout
|
|
*
|
|
**/
|
|
static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
|
|
{
|
|
s32 ret_val;
|
|
|
|
ret_val = ixgbe_start_hw_generic(hw);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* set the completion timeout for interface */
|
|
ixgbe_set_pcie_completion_timeout(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_link_capabilities_82598 - Determines link capabilities
|
|
* @hw: pointer to hardware structure
|
|
* @speed: pointer to link speed
|
|
* @autoneg: boolean auto-negotiation value
|
|
*
|
|
* Determines the link capabilities by reading the AUTOC register.
|
|
**/
|
|
static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed *speed,
|
|
bool *autoneg)
|
|
{
|
|
u32 autoc = 0;
|
|
|
|
/*
|
|
* Determine link capabilities based on the stored value of AUTOC,
|
|
* which represents EEPROM defaults. If AUTOC value has not been
|
|
* stored, use the current register value.
|
|
*/
|
|
if (hw->mac.orig_link_settings_stored)
|
|
autoc = hw->mac.orig_autoc;
|
|
else
|
|
autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
|
|
|
|
switch (autoc & IXGBE_AUTOC_LMS_MASK) {
|
|
case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
*autoneg = false;
|
|
break;
|
|
|
|
case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
|
|
*speed = IXGBE_LINK_SPEED_10GB_FULL;
|
|
*autoneg = false;
|
|
break;
|
|
|
|
case IXGBE_AUTOC_LMS_1G_AN:
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
*autoneg = true;
|
|
break;
|
|
|
|
case IXGBE_AUTOC_LMS_KX4_AN:
|
|
case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
|
|
*speed = IXGBE_LINK_SPEED_UNKNOWN;
|
|
if (autoc & IXGBE_AUTOC_KX4_SUPP)
|
|
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
if (autoc & IXGBE_AUTOC_KX_SUPP)
|
|
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
*autoneg = true;
|
|
break;
|
|
|
|
default:
|
|
return IXGBE_ERR_LINK_SETUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_media_type_82598 - Determines media type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Returns the media type (fiber, copper, backplane)
|
|
**/
|
|
static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
|
|
{
|
|
/* Detect if there is a copper PHY attached. */
|
|
switch (hw->phy.type) {
|
|
case ixgbe_phy_cu_unknown:
|
|
case ixgbe_phy_tn:
|
|
return ixgbe_media_type_copper;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Media type for I82598 is based on device ID */
|
|
switch (hw->device_id) {
|
|
case IXGBE_DEV_ID_82598:
|
|
case IXGBE_DEV_ID_82598_BX:
|
|
/* Default device ID is mezzanine card KX/KX4 */
|
|
return ixgbe_media_type_backplane;
|
|
|
|
case IXGBE_DEV_ID_82598AF_DUAL_PORT:
|
|
case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
|
|
case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
|
|
case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
|
|
case IXGBE_DEV_ID_82598EB_XF_LR:
|
|
case IXGBE_DEV_ID_82598EB_SFP_LOM:
|
|
return ixgbe_media_type_fiber;
|
|
|
|
case IXGBE_DEV_ID_82598EB_CX4:
|
|
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
|
|
return ixgbe_media_type_cx4;
|
|
|
|
case IXGBE_DEV_ID_82598AT:
|
|
case IXGBE_DEV_ID_82598AT2:
|
|
return ixgbe_media_type_copper;
|
|
|
|
default:
|
|
return ixgbe_media_type_unknown;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_fc_enable_82598 - Enable flow control
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Enable flow control according to the current settings.
|
|
**/
|
|
static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
|
|
{
|
|
u32 fctrl_reg;
|
|
u32 rmcs_reg;
|
|
u32 reg;
|
|
u32 fcrtl, fcrth;
|
|
u32 link_speed = 0;
|
|
int i;
|
|
bool link_up;
|
|
|
|
/* Validate the water mark configuration */
|
|
if (!hw->fc.pause_time)
|
|
return IXGBE_ERR_INVALID_LINK_SETTINGS;
|
|
|
|
/* Low water mark of zero causes XOFF floods */
|
|
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
|
|
if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
|
|
hw->fc.high_water[i]) {
|
|
if (!hw->fc.low_water[i] ||
|
|
hw->fc.low_water[i] >= hw->fc.high_water[i]) {
|
|
hw_dbg(hw, "Invalid water mark configuration\n");
|
|
return IXGBE_ERR_INVALID_LINK_SETTINGS;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* On 82598 having Rx FC on causes resets while doing 1G
|
|
* so if it's on turn it off once we know link_speed. For
|
|
* more details see 82598 Specification update.
|
|
*/
|
|
hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
|
|
if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
|
|
switch (hw->fc.requested_mode) {
|
|
case ixgbe_fc_full:
|
|
hw->fc.requested_mode = ixgbe_fc_tx_pause;
|
|
break;
|
|
case ixgbe_fc_rx_pause:
|
|
hw->fc.requested_mode = ixgbe_fc_none;
|
|
break;
|
|
default:
|
|
/* no change */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Negotiate the fc mode to use */
|
|
hw->mac.ops.fc_autoneg(hw);
|
|
|
|
/* Disable any previous flow control settings */
|
|
fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
|
|
|
|
rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
|
|
rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
|
|
|
|
/*
|
|
* The possible values of fc.current_mode are:
|
|
* 0: Flow control is completely disabled
|
|
* 1: Rx flow control is enabled (we can receive pause frames,
|
|
* but not send pause frames).
|
|
* 2: Tx flow control is enabled (we can send pause frames but
|
|
* we do not support receiving pause frames).
|
|
* 3: Both Rx and Tx flow control (symmetric) are enabled.
|
|
* other: Invalid.
|
|
*/
|
|
switch (hw->fc.current_mode) {
|
|
case ixgbe_fc_none:
|
|
/*
|
|
* Flow control is disabled by software override or autoneg.
|
|
* The code below will actually disable it in the HW.
|
|
*/
|
|
break;
|
|
case ixgbe_fc_rx_pause:
|
|
/*
|
|
* Rx Flow control is enabled and Tx Flow control is
|
|
* disabled by software override. Since there really
|
|
* isn't a way to advertise that we are capable of RX
|
|
* Pause ONLY, we will advertise that we support both
|
|
* symmetric and asymmetric Rx PAUSE. Later, we will
|
|
* disable the adapter's ability to send PAUSE frames.
|
|
*/
|
|
fctrl_reg |= IXGBE_FCTRL_RFCE;
|
|
break;
|
|
case ixgbe_fc_tx_pause:
|
|
/*
|
|
* Tx Flow control is enabled, and Rx Flow control is
|
|
* disabled by software override.
|
|
*/
|
|
rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
|
|
break;
|
|
case ixgbe_fc_full:
|
|
/* Flow control (both Rx and Tx) is enabled by SW override. */
|
|
fctrl_reg |= IXGBE_FCTRL_RFCE;
|
|
rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
|
|
break;
|
|
default:
|
|
hw_dbg(hw, "Flow control param set incorrectly\n");
|
|
return IXGBE_ERR_CONFIG;
|
|
}
|
|
|
|
/* Set 802.3x based flow control settings. */
|
|
fctrl_reg |= IXGBE_FCTRL_DPF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
|
|
|
|
/* Set up and enable Rx high/low water mark thresholds, enable XON. */
|
|
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
|
|
if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
|
|
hw->fc.high_water[i]) {
|
|
fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
|
|
fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
|
|
} else {
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
|
|
}
|
|
|
|
}
|
|
|
|
/* Configure pause time (2 TCs per register) */
|
|
reg = hw->fc.pause_time * 0x00010001;
|
|
for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
|
|
|
|
/* Configure flow control refresh threshold value */
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_start_mac_link_82598 - Configures MAC link settings
|
|
* @hw: pointer to hardware structure
|
|
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
|
*
|
|
* Configures link settings based on values in the ixgbe_hw struct.
|
|
* Restarts the link. Performs autonegotiation if needed.
|
|
**/
|
|
static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
u32 autoc_reg;
|
|
u32 links_reg;
|
|
u32 i;
|
|
s32 status = 0;
|
|
|
|
/* Restart link */
|
|
autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
|
|
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
|
|
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
|
|
|
|
/* Only poll for autoneg to complete if specified to do so */
|
|
if (autoneg_wait_to_complete) {
|
|
if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
|
|
IXGBE_AUTOC_LMS_KX4_AN ||
|
|
(autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
|
|
IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
|
|
links_reg = 0; /* Just in case Autoneg time = 0 */
|
|
for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
|
|
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
|
|
if (links_reg & IXGBE_LINKS_KX_AN_COMP)
|
|
break;
|
|
msleep(100);
|
|
}
|
|
if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
|
|
status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
|
|
hw_dbg(hw, "Autonegotiation did not complete.\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Add delay to filter out noises during initial link setup */
|
|
msleep(50);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_validate_link_ready - Function looks for phy link
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Function indicates success when phy link is available. If phy is not ready
|
|
* within 5 seconds of MAC indicating link, the function returns error.
|
|
**/
|
|
static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
|
|
{
|
|
u32 timeout;
|
|
u16 an_reg;
|
|
|
|
if (hw->device_id != IXGBE_DEV_ID_82598AT2)
|
|
return 0;
|
|
|
|
for (timeout = 0;
|
|
timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
|
|
hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &an_reg);
|
|
|
|
if ((an_reg & MDIO_AN_STAT1_COMPLETE) &&
|
|
(an_reg & MDIO_STAT1_LSTATUS))
|
|
break;
|
|
|
|
msleep(100);
|
|
}
|
|
|
|
if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
|
|
hw_dbg(hw, "Link was indicated but link is down\n");
|
|
return IXGBE_ERR_LINK_SETUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_mac_link_82598 - Get link/speed status
|
|
* @hw: pointer to hardware structure
|
|
* @speed: pointer to link speed
|
|
* @link_up: true is link is up, false otherwise
|
|
* @link_up_wait_to_complete: bool used to wait for link up or not
|
|
*
|
|
* Reads the links register to determine if link is up and the current speed
|
|
**/
|
|
static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed *speed, bool *link_up,
|
|
bool link_up_wait_to_complete)
|
|
{
|
|
u32 links_reg;
|
|
u32 i;
|
|
u16 link_reg, adapt_comp_reg;
|
|
|
|
/*
|
|
* SERDES PHY requires us to read link status from register 0xC79F.
|
|
* Bit 0 set indicates link is up/ready; clear indicates link down.
|
|
* 0xC00C is read to check that the XAUI lanes are active. Bit 0
|
|
* clear indicates active; set indicates inactive.
|
|
*/
|
|
if (hw->phy.type == ixgbe_phy_nl) {
|
|
hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
|
|
hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
|
|
hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
|
|
&adapt_comp_reg);
|
|
if (link_up_wait_to_complete) {
|
|
for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
|
|
if ((link_reg & 1) &&
|
|
((adapt_comp_reg & 1) == 0)) {
|
|
*link_up = true;
|
|
break;
|
|
} else {
|
|
*link_up = false;
|
|
}
|
|
msleep(100);
|
|
hw->phy.ops.read_reg(hw, 0xC79F,
|
|
MDIO_MMD_PMAPMD,
|
|
&link_reg);
|
|
hw->phy.ops.read_reg(hw, 0xC00C,
|
|
MDIO_MMD_PMAPMD,
|
|
&adapt_comp_reg);
|
|
}
|
|
} else {
|
|
if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
|
|
*link_up = true;
|
|
else
|
|
*link_up = false;
|
|
}
|
|
|
|
if (!*link_up)
|
|
return 0;
|
|
}
|
|
|
|
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
|
|
if (link_up_wait_to_complete) {
|
|
for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
|
|
if (links_reg & IXGBE_LINKS_UP) {
|
|
*link_up = true;
|
|
break;
|
|
} else {
|
|
*link_up = false;
|
|
}
|
|
msleep(100);
|
|
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
|
|
}
|
|
} else {
|
|
if (links_reg & IXGBE_LINKS_UP)
|
|
*link_up = true;
|
|
else
|
|
*link_up = false;
|
|
}
|
|
|
|
if (links_reg & IXGBE_LINKS_SPEED)
|
|
*speed = IXGBE_LINK_SPEED_10GB_FULL;
|
|
else
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
|
|
if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && *link_up &&
|
|
(ixgbe_validate_link_ready(hw) != 0))
|
|
*link_up = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_mac_link_82598 - Set MAC link speed
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
|
*
|
|
* Set the link speed in the AUTOC register and restarts link.
|
|
**/
|
|
static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
bool autoneg = false;
|
|
ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
|
|
u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
|
|
u32 autoc = curr_autoc;
|
|
u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
|
|
|
|
/* Check to see if speed passed in is supported. */
|
|
ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg);
|
|
speed &= link_capabilities;
|
|
|
|
if (speed == IXGBE_LINK_SPEED_UNKNOWN)
|
|
return IXGBE_ERR_LINK_SETUP;
|
|
|
|
/* Set KX4/KX support according to speed requested */
|
|
else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
|
|
link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
|
|
autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
|
|
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
|
|
autoc |= IXGBE_AUTOC_KX4_SUPP;
|
|
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
|
|
autoc |= IXGBE_AUTOC_KX_SUPP;
|
|
if (autoc != curr_autoc)
|
|
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
|
|
}
|
|
|
|
/* Setup and restart the link based on the new values in
|
|
* ixgbe_hw This will write the AUTOC register based on the new
|
|
* stored values
|
|
*/
|
|
return ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
|
|
}
|
|
|
|
|
|
/**
|
|
* ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg_wait_to_complete: true if waiting is needed to complete
|
|
*
|
|
* Sets the link speed in the AUTOC register in the MAC and restarts link.
|
|
**/
|
|
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
s32 status;
|
|
|
|
/* Setup the PHY according to input speed */
|
|
status = hw->phy.ops.setup_link_speed(hw, speed,
|
|
autoneg_wait_to_complete);
|
|
/* Set up MAC */
|
|
ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_hw_82598 - Performs hardware reset
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Resets the hardware by resetting the transmit and receive units, masks and
|
|
* clears all interrupts, performing a PHY reset, and performing a link (MAC)
|
|
* reset.
|
|
**/
|
|
static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status;
|
|
s32 phy_status = 0;
|
|
u32 ctrl;
|
|
u32 gheccr;
|
|
u32 i;
|
|
u32 autoc;
|
|
u8 analog_val;
|
|
|
|
/* Call adapter stop to disable tx/rx and clear interrupts */
|
|
status = hw->mac.ops.stop_adapter(hw);
|
|
if (status)
|
|
return status;
|
|
|
|
/*
|
|
* Power up the Atlas Tx lanes if they are currently powered down.
|
|
* Atlas Tx lanes are powered down for MAC loopback tests, but
|
|
* they are not automatically restored on reset.
|
|
*/
|
|
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
|
|
if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
|
|
/* Enable Tx Atlas so packets can be transmitted again */
|
|
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
|
|
&analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
|
|
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
|
|
analog_val);
|
|
|
|
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
|
|
&analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
|
|
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
|
|
analog_val);
|
|
|
|
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
|
|
&analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
|
|
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
|
|
analog_val);
|
|
|
|
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
|
|
&analog_val);
|
|
analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
|
|
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
|
|
analog_val);
|
|
}
|
|
|
|
/* Reset PHY */
|
|
if (hw->phy.reset_disable == false) {
|
|
/* PHY ops must be identified and initialized prior to reset */
|
|
|
|
/* Init PHY and function pointers, perform SFP setup */
|
|
phy_status = hw->phy.ops.init(hw);
|
|
if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
|
|
return phy_status;
|
|
if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
|
|
goto mac_reset_top;
|
|
|
|
hw->phy.ops.reset(hw);
|
|
}
|
|
|
|
mac_reset_top:
|
|
/*
|
|
* Issue global reset to the MAC. This needs to be a SW reset.
|
|
* If link reset is used, it might reset the MAC when mng is using it
|
|
*/
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST;
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
usleep_range(1000, 1200);
|
|
|
|
/* Poll for reset bit to self-clear indicating reset is complete */
|
|
for (i = 0; i < 10; i++) {
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
|
|
if (!(ctrl & IXGBE_CTRL_RST))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
if (ctrl & IXGBE_CTRL_RST) {
|
|
status = IXGBE_ERR_RESET_FAILED;
|
|
hw_dbg(hw, "Reset polling failed to complete.\n");
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
/*
|
|
* Double resets are required for recovery from certain error
|
|
* conditions. Between resets, it is necessary to stall to allow time
|
|
* for any pending HW events to complete.
|
|
*/
|
|
if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
|
|
hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
|
|
goto mac_reset_top;
|
|
}
|
|
|
|
gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
|
|
gheccr &= ~(BIT(21) | BIT(18) | BIT(9) | BIT(6));
|
|
IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
|
|
|
|
/*
|
|
* Store the original AUTOC value if it has not been
|
|
* stored off yet. Otherwise restore the stored original
|
|
* AUTOC value since the reset operation sets back to deaults.
|
|
*/
|
|
autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
|
|
if (hw->mac.orig_link_settings_stored == false) {
|
|
hw->mac.orig_autoc = autoc;
|
|
hw->mac.orig_link_settings_stored = true;
|
|
} else if (autoc != hw->mac.orig_autoc) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
|
|
}
|
|
|
|
/* Store the permanent mac address */
|
|
hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
|
|
|
|
/*
|
|
* Store MAC address from RAR0, clear receive address registers, and
|
|
* clear the multicast table
|
|
*/
|
|
hw->mac.ops.init_rx_addrs(hw);
|
|
|
|
if (phy_status)
|
|
status = phy_status;
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
|
|
* @hw: pointer to hardware struct
|
|
* @rar: receive address register index to associate with a VMDq index
|
|
* @vmdq: VMDq set index
|
|
**/
|
|
static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
|
{
|
|
u32 rar_high;
|
|
u32 rar_entries = hw->mac.num_rar_entries;
|
|
|
|
/* Make sure we are using a valid rar index range */
|
|
if (rar >= rar_entries) {
|
|
hw_dbg(hw, "RAR index %d is out of range.\n", rar);
|
|
return IXGBE_ERR_INVALID_ARGUMENT;
|
|
}
|
|
|
|
rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
|
|
rar_high &= ~IXGBE_RAH_VIND_MASK;
|
|
rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
|
|
* @hw: pointer to hardware struct
|
|
* @rar: receive address register index to associate with a VMDq index
|
|
* @vmdq: VMDq clear index (not used in 82598, but elsewhere)
|
|
**/
|
|
static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
|
{
|
|
u32 rar_high;
|
|
u32 rar_entries = hw->mac.num_rar_entries;
|
|
|
|
|
|
/* Make sure we are using a valid rar index range */
|
|
if (rar >= rar_entries) {
|
|
hw_dbg(hw, "RAR index %d is out of range.\n", rar);
|
|
return IXGBE_ERR_INVALID_ARGUMENT;
|
|
}
|
|
|
|
rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
|
|
if (rar_high & IXGBE_RAH_VIND_MASK) {
|
|
rar_high &= ~IXGBE_RAH_VIND_MASK;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_vfta_82598 - Set VLAN filter table
|
|
* @hw: pointer to hardware structure
|
|
* @vlan: VLAN id to write to VLAN filter
|
|
* @vind: VMDq output index that maps queue to VLAN id in VFTA
|
|
* @vlan_on: boolean flag to turn on/off VLAN in VFTA
|
|
* @vlvf_bypass: boolean flag - unused
|
|
*
|
|
* Turn on/off specified VLAN in the VLAN filter table.
|
|
**/
|
|
static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
|
|
bool vlan_on, bool vlvf_bypass)
|
|
{
|
|
u32 regindex;
|
|
u32 bitindex;
|
|
u32 bits;
|
|
u32 vftabyte;
|
|
|
|
if (vlan > 4095)
|
|
return IXGBE_ERR_PARAM;
|
|
|
|
/* Determine 32-bit word position in array */
|
|
regindex = (vlan >> 5) & 0x7F; /* upper seven bits */
|
|
|
|
/* Determine the location of the (VMD) queue index */
|
|
vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
|
|
bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
|
|
|
|
/* Set the nibble for VMD queue index */
|
|
bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
|
|
bits &= (~(0x0F << bitindex));
|
|
bits |= (vind << bitindex);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
|
|
|
|
/* Determine the location of the bit for this VLAN id */
|
|
bitindex = vlan & 0x1F; /* lower five bits */
|
|
|
|
bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
|
|
if (vlan_on)
|
|
/* Turn on this VLAN id */
|
|
bits |= BIT(bitindex);
|
|
else
|
|
/* Turn off this VLAN id */
|
|
bits &= ~BIT(bitindex);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clear_vfta_82598 - Clear VLAN filter table
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Clears the VLAN filer table, and the VMDq index associated with the filter
|
|
**/
|
|
static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
|
|
{
|
|
u32 offset;
|
|
u32 vlanbyte;
|
|
|
|
for (offset = 0; offset < hw->mac.vft_size; offset++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
|
|
|
|
for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
|
|
for (offset = 0; offset < hw->mac.vft_size; offset++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
|
|
0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
|
|
* @hw: pointer to hardware structure
|
|
* @reg: analog register to read
|
|
* @val: read value
|
|
*
|
|
* Performs read operation to Atlas analog register specified.
|
|
**/
|
|
static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
|
|
{
|
|
u32 atlas_ctl;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
|
|
IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
udelay(10);
|
|
atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
|
|
*val = (u8)atlas_ctl;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
|
|
* @hw: pointer to hardware structure
|
|
* @reg: atlas register to write
|
|
* @val: value to write
|
|
*
|
|
* Performs write operation to Atlas analog register specified.
|
|
**/
|
|
static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
|
|
{
|
|
u32 atlas_ctl;
|
|
|
|
atlas_ctl = (reg << 8) | val;
|
|
IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
udelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
|
|
* @hw: pointer to hardware structure
|
|
* @dev_addr: address to read from
|
|
* @byte_offset: byte offset to read from dev_addr
|
|
* @eeprom_data: value read
|
|
*
|
|
* Performs 8 byte read operation to SFP module's data over I2C interface.
|
|
**/
|
|
static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
|
|
u8 byte_offset, u8 *eeprom_data)
|
|
{
|
|
s32 status = 0;
|
|
u16 sfp_addr = 0;
|
|
u16 sfp_data = 0;
|
|
u16 sfp_stat = 0;
|
|
u16 gssr;
|
|
u32 i;
|
|
|
|
if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
|
|
gssr = IXGBE_GSSR_PHY1_SM;
|
|
else
|
|
gssr = IXGBE_GSSR_PHY0_SM;
|
|
|
|
if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
|
|
return IXGBE_ERR_SWFW_SYNC;
|
|
|
|
if (hw->phy.type == ixgbe_phy_nl) {
|
|
/*
|
|
* phy SDA/SCL registers are at addresses 0xC30A to
|
|
* 0xC30D. These registers are used to talk to the SFP+
|
|
* module's EEPROM through the SDA/SCL (I2C) interface.
|
|
*/
|
|
sfp_addr = (dev_addr << 8) + byte_offset;
|
|
sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
|
|
hw->phy.ops.write_reg_mdi(hw,
|
|
IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
|
|
MDIO_MMD_PMAPMD,
|
|
sfp_addr);
|
|
|
|
/* Poll status */
|
|
for (i = 0; i < 100; i++) {
|
|
hw->phy.ops.read_reg_mdi(hw,
|
|
IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
|
|
MDIO_MMD_PMAPMD,
|
|
&sfp_stat);
|
|
sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
|
|
if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
|
|
break;
|
|
usleep_range(10000, 20000);
|
|
}
|
|
|
|
if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
|
|
hw_dbg(hw, "EEPROM read did not pass.\n");
|
|
status = IXGBE_ERR_SFP_NOT_PRESENT;
|
|
goto out;
|
|
}
|
|
|
|
/* Read data */
|
|
hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
|
|
MDIO_MMD_PMAPMD, &sfp_data);
|
|
|
|
*eeprom_data = (u8)(sfp_data >> 8);
|
|
} else {
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
|
|
out:
|
|
hw->mac.ops.release_swfw_sync(hw, gssr);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: EEPROM byte offset to read
|
|
* @eeprom_data: value read
|
|
*
|
|
* Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
|
|
**/
|
|
static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 *eeprom_data)
|
|
{
|
|
return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR,
|
|
byte_offset, eeprom_data);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset at address 0xA2
|
|
* @sff8472_data: value read
|
|
*
|
|
* Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
|
|
**/
|
|
static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 *sff8472_data)
|
|
{
|
|
return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2,
|
|
byte_offset, sff8472_data);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
|
|
* port devices.
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Calls common function and corrects issue with some single port devices
|
|
* that enable LAN1 but not LAN0.
|
|
**/
|
|
static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
|
|
{
|
|
struct ixgbe_bus_info *bus = &hw->bus;
|
|
u16 pci_gen = 0;
|
|
u16 pci_ctrl2 = 0;
|
|
|
|
ixgbe_set_lan_id_multi_port_pcie(hw);
|
|
|
|
/* check if LAN0 is disabled */
|
|
hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
|
|
if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
|
|
|
|
hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
|
|
|
|
/* if LAN0 is completely disabled force function to 0 */
|
|
if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
|
|
!(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
|
|
!(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
|
|
|
|
bus->func = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_rxpba_82598 - Initialize RX packet buffer
|
|
* @hw: pointer to hardware structure
|
|
* @num_pb: number of packet buffers to allocate
|
|
* @headroom: reserve n KB of headroom
|
|
* @strategy: packet buffer allocation strategy
|
|
**/
|
|
static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
|
|
u32 headroom, int strategy)
|
|
{
|
|
u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
|
|
u8 i = 0;
|
|
|
|
if (!num_pb)
|
|
return;
|
|
|
|
/* Setup Rx packet buffer sizes */
|
|
switch (strategy) {
|
|
case PBA_STRATEGY_WEIGHTED:
|
|
/* Setup the first four at 80KB */
|
|
rxpktsize = IXGBE_RXPBSIZE_80KB;
|
|
for (; i < 4; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
|
|
/* Setup the last four at 48KB...don't re-init i */
|
|
rxpktsize = IXGBE_RXPBSIZE_48KB;
|
|
/* Fall Through */
|
|
case PBA_STRATEGY_EQUAL:
|
|
default:
|
|
/* Divide the remaining Rx packet buffer evenly among the TCs */
|
|
for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
|
|
break;
|
|
}
|
|
|
|
/* Setup Tx packet buffer sizes */
|
|
for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
|
|
}
|
|
|
|
static const struct ixgbe_mac_operations mac_ops_82598 = {
|
|
.init_hw = &ixgbe_init_hw_generic,
|
|
.reset_hw = &ixgbe_reset_hw_82598,
|
|
.start_hw = &ixgbe_start_hw_82598,
|
|
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
|
|
.get_media_type = &ixgbe_get_media_type_82598,
|
|
.enable_rx_dma = &ixgbe_enable_rx_dma_generic,
|
|
.get_mac_addr = &ixgbe_get_mac_addr_generic,
|
|
.stop_adapter = &ixgbe_stop_adapter_generic,
|
|
.get_bus_info = &ixgbe_get_bus_info_generic,
|
|
.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598,
|
|
.read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
|
|
.write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
|
|
.setup_link = &ixgbe_setup_mac_link_82598,
|
|
.set_rxpba = &ixgbe_set_rxpba_82598,
|
|
.check_link = &ixgbe_check_mac_link_82598,
|
|
.get_link_capabilities = &ixgbe_get_link_capabilities_82598,
|
|
.led_on = &ixgbe_led_on_generic,
|
|
.led_off = &ixgbe_led_off_generic,
|
|
.init_led_link_act = ixgbe_init_led_link_act_generic,
|
|
.blink_led_start = &ixgbe_blink_led_start_generic,
|
|
.blink_led_stop = &ixgbe_blink_led_stop_generic,
|
|
.set_rar = &ixgbe_set_rar_generic,
|
|
.clear_rar = &ixgbe_clear_rar_generic,
|
|
.set_vmdq = &ixgbe_set_vmdq_82598,
|
|
.clear_vmdq = &ixgbe_clear_vmdq_82598,
|
|
.init_rx_addrs = &ixgbe_init_rx_addrs_generic,
|
|
.update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
|
|
.enable_mc = &ixgbe_enable_mc_generic,
|
|
.disable_mc = &ixgbe_disable_mc_generic,
|
|
.clear_vfta = &ixgbe_clear_vfta_82598,
|
|
.set_vfta = &ixgbe_set_vfta_82598,
|
|
.fc_enable = &ixgbe_fc_enable_82598,
|
|
.setup_fc = ixgbe_setup_fc_generic,
|
|
.fc_autoneg = ixgbe_fc_autoneg,
|
|
.set_fw_drv_ver = NULL,
|
|
.acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
|
|
.release_swfw_sync = &ixgbe_release_swfw_sync,
|
|
.init_swfw_sync = NULL,
|
|
.get_thermal_sensor_data = NULL,
|
|
.init_thermal_sensor_thresh = NULL,
|
|
.prot_autoc_read = &prot_autoc_read_generic,
|
|
.prot_autoc_write = &prot_autoc_write_generic,
|
|
.enable_rx = &ixgbe_enable_rx_generic,
|
|
.disable_rx = &ixgbe_disable_rx_generic,
|
|
};
|
|
|
|
static const struct ixgbe_eeprom_operations eeprom_ops_82598 = {
|
|
.init_params = &ixgbe_init_eeprom_params_generic,
|
|
.read = &ixgbe_read_eerd_generic,
|
|
.write = &ixgbe_write_eeprom_generic,
|
|
.write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic,
|
|
.read_buffer = &ixgbe_read_eerd_buffer_generic,
|
|
.calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
|
|
.validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
|
|
.update_checksum = &ixgbe_update_eeprom_checksum_generic,
|
|
};
|
|
|
|
static const struct ixgbe_phy_operations phy_ops_82598 = {
|
|
.identify = &ixgbe_identify_phy_generic,
|
|
.identify_sfp = &ixgbe_identify_module_generic,
|
|
.init = &ixgbe_init_phy_ops_82598,
|
|
.reset = &ixgbe_reset_phy_generic,
|
|
.read_reg = &ixgbe_read_phy_reg_generic,
|
|
.write_reg = &ixgbe_write_phy_reg_generic,
|
|
.read_reg_mdi = &ixgbe_read_phy_reg_mdi,
|
|
.write_reg_mdi = &ixgbe_write_phy_reg_mdi,
|
|
.setup_link = &ixgbe_setup_phy_link_generic,
|
|
.setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
|
|
.read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598,
|
|
.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598,
|
|
.check_overtemp = &ixgbe_tn_check_overtemp,
|
|
};
|
|
|
|
const struct ixgbe_info ixgbe_82598_info = {
|
|
.mac = ixgbe_mac_82598EB,
|
|
.get_invariants = &ixgbe_get_invariants_82598,
|
|
.mac_ops = &mac_ops_82598,
|
|
.eeprom_ops = &eeprom_ops_82598,
|
|
.phy_ops = &phy_ops_82598,
|
|
.mvals = ixgbe_mvals_8259X,
|
|
};
|