6db4831e98
Android 14
722 lines
17 KiB
C
722 lines
17 KiB
C
/*
|
|
* (c) Copyright 2002-2010, Ralink Technology, Inc.
|
|
* Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
|
|
* Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "mt76x0.h"
|
|
#include "eeprom.h"
|
|
#include "trace.h"
|
|
#include "mcu.h"
|
|
#include "usb.h"
|
|
|
|
#include "initvals.h"
|
|
|
|
static void
|
|
mt76x0_set_wlan_state(struct mt76x0_dev *dev, u32 val, bool enable)
|
|
{
|
|
int i;
|
|
|
|
/* Note: we don't turn off WLAN_CLK because that makes the device
|
|
* not respond properly on the probe path.
|
|
* In case anyone (PSM?) wants to use this function we can
|
|
* bring the clock stuff back and fixup the probe path.
|
|
*/
|
|
|
|
if (enable)
|
|
val |= (MT_WLAN_FUN_CTRL_WLAN_EN |
|
|
MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
|
|
else
|
|
val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN);
|
|
|
|
mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
|
|
udelay(20);
|
|
|
|
if (!enable)
|
|
return;
|
|
|
|
for (i = 200; i; i--) {
|
|
val = mt76_rr(dev, MT_CMB_CTRL);
|
|
|
|
if (val & MT_CMB_CTRL_XTAL_RDY && val & MT_CMB_CTRL_PLL_LD)
|
|
break;
|
|
|
|
udelay(20);
|
|
}
|
|
|
|
/* Note: vendor driver tries to disable/enable wlan here and retry
|
|
* but the code which does it is so buggy it must have never
|
|
* triggered, so don't bother.
|
|
*/
|
|
if (!i)
|
|
dev_err(dev->mt76.dev, "Error: PLL and XTAL check failed!\n");
|
|
}
|
|
|
|
void mt76x0_chip_onoff(struct mt76x0_dev *dev, bool enable, bool reset)
|
|
{
|
|
u32 val;
|
|
|
|
mutex_lock(&dev->hw_atomic_mutex);
|
|
|
|
val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
|
|
|
|
if (reset) {
|
|
val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN;
|
|
val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL;
|
|
|
|
if (val & MT_WLAN_FUN_CTRL_WLAN_EN) {
|
|
val |= (MT_WLAN_FUN_CTRL_WLAN_RESET |
|
|
MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
|
|
mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
|
|
udelay(20);
|
|
|
|
val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET |
|
|
MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
|
|
}
|
|
}
|
|
|
|
mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
|
|
udelay(20);
|
|
|
|
mt76x0_set_wlan_state(dev, val, enable);
|
|
|
|
mutex_unlock(&dev->hw_atomic_mutex);
|
|
}
|
|
|
|
static void mt76x0_reset_csr_bbp(struct mt76x0_dev *dev)
|
|
{
|
|
u32 val;
|
|
|
|
val = mt76_rr(dev, MT_PBF_SYS_CTRL);
|
|
val &= ~0x2000;
|
|
mt76_wr(dev, MT_PBF_SYS_CTRL, val);
|
|
|
|
mt76_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR |
|
|
MT_MAC_SYS_CTRL_RESET_BBP);
|
|
|
|
msleep(200);
|
|
}
|
|
|
|
static void mt76x0_init_usb_dma(struct mt76x0_dev *dev)
|
|
{
|
|
u32 val;
|
|
|
|
val = mt76_rr(dev, MT_USB_DMA_CFG);
|
|
|
|
val |= FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, MT_USB_AGGR_TIMEOUT) |
|
|
FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_LMT, MT_USB_AGGR_SIZE_LIMIT) |
|
|
MT_USB_DMA_CFG_RX_BULK_EN |
|
|
MT_USB_DMA_CFG_TX_BULK_EN;
|
|
if (dev->in_max_packet == 512)
|
|
val |= MT_USB_DMA_CFG_RX_BULK_AGG_EN;
|
|
mt76_wr(dev, MT_USB_DMA_CFG, val);
|
|
|
|
val = mt76_rr(dev, MT_COM_REG0);
|
|
if (val & 1)
|
|
dev_dbg(dev->mt76.dev, "MCU not ready\n");
|
|
|
|
val = mt76_rr(dev, MT_USB_DMA_CFG);
|
|
|
|
val |= MT_USB_DMA_CFG_RX_DROP_OR_PADDING;
|
|
mt76_wr(dev, MT_USB_DMA_CFG, val);
|
|
val &= ~MT_USB_DMA_CFG_RX_DROP_OR_PADDING;
|
|
mt76_wr(dev, MT_USB_DMA_CFG, val);
|
|
}
|
|
|
|
#define RANDOM_WRITE(dev, tab) \
|
|
mt76x0_write_reg_pairs(dev, MT_MCU_MEMMAP_WLAN, tab, ARRAY_SIZE(tab));
|
|
|
|
static int mt76x0_init_bbp(struct mt76x0_dev *dev)
|
|
{
|
|
int ret, i;
|
|
|
|
ret = mt76x0_wait_bbp_ready(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
RANDOM_WRITE(dev, mt76x0_bbp_init_tab);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) {
|
|
const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i];
|
|
const struct mt76_reg_pair *pair = &item->reg_pair;
|
|
|
|
if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20))
|
|
mt76_wr(dev, pair->reg, pair->value);
|
|
}
|
|
|
|
RANDOM_WRITE(dev, mt76x0_dcoc_tab);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mt76_init_beacon_offsets(struct mt76x0_dev *dev)
|
|
{
|
|
u16 base = MT_BEACON_BASE;
|
|
u32 regs[4] = {};
|
|
int i;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
u16 addr = dev->beacon_offsets[i];
|
|
|
|
regs[i / 4] |= ((addr - base) / 64) << (8 * (i % 4));
|
|
}
|
|
|
|
for (i = 0; i < 4; i++)
|
|
mt76_wr(dev, MT_BCN_OFFSET(i), regs[i]);
|
|
}
|
|
|
|
static void mt76x0_init_mac_registers(struct mt76x0_dev *dev)
|
|
{
|
|
u32 reg;
|
|
|
|
RANDOM_WRITE(dev, common_mac_reg_table);
|
|
|
|
mt76_init_beacon_offsets(dev);
|
|
|
|
/* Enable PBF and MAC clock SYS_CTRL[11:10] = 0x3 */
|
|
RANDOM_WRITE(dev, mt76x0_mac_reg_table);
|
|
|
|
/* Release BBP and MAC reset MAC_SYS_CTRL[1:0] = 0x0 */
|
|
reg = mt76_rr(dev, MT_MAC_SYS_CTRL);
|
|
reg &= ~0x3;
|
|
mt76_wr(dev, MT_MAC_SYS_CTRL, reg);
|
|
|
|
if (is_mt7610e(dev)) {
|
|
/* Disable COEX_EN */
|
|
reg = mt76_rr(dev, MT_COEXCFG0);
|
|
reg &= 0xFFFFFFFE;
|
|
mt76_wr(dev, MT_COEXCFG0, reg);
|
|
}
|
|
|
|
/* Set 0x141C[15:12]=0xF */
|
|
reg = mt76_rr(dev, MT_EXT_CCA_CFG);
|
|
reg |= 0x0000F000;
|
|
mt76_wr(dev, MT_EXT_CCA_CFG, reg);
|
|
|
|
mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN);
|
|
|
|
/*
|
|
TxRing 9 is for Mgmt frame.
|
|
TxRing 8 is for In-band command frame.
|
|
WMM_RG0_TXQMA: This register setting is for FCE to define the rule of TxRing 9.
|
|
WMM_RG1_TXQMA: This register setting is for FCE to define the rule of TxRing 8.
|
|
*/
|
|
reg = mt76_rr(dev, MT_WMM_CTRL);
|
|
reg &= ~0x000003FF;
|
|
reg |= 0x00000201;
|
|
mt76_wr(dev, MT_WMM_CTRL, reg);
|
|
|
|
/* TODO: Probably not needed */
|
|
mt76_wr(dev, 0x7028, 0);
|
|
mt76_wr(dev, 0x7010, 0);
|
|
mt76_wr(dev, 0x7024, 0);
|
|
msleep(10);
|
|
}
|
|
|
|
static int mt76x0_init_wcid_mem(struct mt76x0_dev *dev)
|
|
{
|
|
u32 *vals;
|
|
int i, ret;
|
|
|
|
vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL);
|
|
if (!vals)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < N_WCIDS; i++) {
|
|
vals[i * 2] = 0xffffffff;
|
|
vals[i * 2 + 1] = 0x00ffffff;
|
|
}
|
|
|
|
ret = mt76x0_burst_write_regs(dev, MT_WCID_ADDR_BASE,
|
|
vals, N_WCIDS * 2);
|
|
kfree(vals);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt76x0_init_key_mem(struct mt76x0_dev *dev)
|
|
{
|
|
u32 vals[4] = {};
|
|
|
|
return mt76x0_burst_write_regs(dev, MT_SKEY_MODE_BASE_0,
|
|
vals, ARRAY_SIZE(vals));
|
|
}
|
|
|
|
static int mt76x0_init_wcid_attr_mem(struct mt76x0_dev *dev)
|
|
{
|
|
u32 *vals;
|
|
int i, ret;
|
|
|
|
vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL);
|
|
if (!vals)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < N_WCIDS * 2; i++)
|
|
vals[i] = 1;
|
|
|
|
ret = mt76x0_burst_write_regs(dev, MT_WCID_ATTR_BASE,
|
|
vals, N_WCIDS * 2);
|
|
kfree(vals);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mt76x0_reset_counters(struct mt76x0_dev *dev)
|
|
{
|
|
mt76_rr(dev, MT_RX_STA_CNT0);
|
|
mt76_rr(dev, MT_RX_STA_CNT1);
|
|
mt76_rr(dev, MT_RX_STA_CNT2);
|
|
mt76_rr(dev, MT_TX_STA_CNT0);
|
|
mt76_rr(dev, MT_TX_STA_CNT1);
|
|
mt76_rr(dev, MT_TX_STA_CNT2);
|
|
}
|
|
|
|
int mt76x0_mac_start(struct mt76x0_dev *dev)
|
|
{
|
|
mt76_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_TX);
|
|
|
|
if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY |
|
|
MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 200000))
|
|
return -ETIMEDOUT;
|
|
|
|
dev->rxfilter = MT_RX_FILTR_CFG_CRC_ERR |
|
|
MT_RX_FILTR_CFG_PHY_ERR | MT_RX_FILTR_CFG_PROMISC |
|
|
MT_RX_FILTR_CFG_VER_ERR | MT_RX_FILTR_CFG_DUP |
|
|
MT_RX_FILTR_CFG_CFACK | MT_RX_FILTR_CFG_CFEND |
|
|
MT_RX_FILTR_CFG_ACK | MT_RX_FILTR_CFG_CTS |
|
|
MT_RX_FILTR_CFG_RTS | MT_RX_FILTR_CFG_PSPOLL |
|
|
MT_RX_FILTR_CFG_BA | MT_RX_FILTR_CFG_CTRL_RSV;
|
|
mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter);
|
|
|
|
mt76_wr(dev, MT_MAC_SYS_CTRL,
|
|
MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);
|
|
|
|
if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY |
|
|
MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 50))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt76x0_mac_stop_hw(struct mt76x0_dev *dev)
|
|
{
|
|
int i, ok;
|
|
|
|
if (test_bit(MT76_REMOVED, &dev->mt76.state))
|
|
return;
|
|
|
|
mt76_clear(dev, MT_BEACON_TIME_CFG, MT_BEACON_TIME_CFG_TIMER_EN |
|
|
MT_BEACON_TIME_CFG_SYNC_MODE | MT_BEACON_TIME_CFG_TBTT_EN |
|
|
MT_BEACON_TIME_CFG_BEACON_TX);
|
|
|
|
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000))
|
|
dev_warn(dev->mt76.dev, "Warning: TX DMA did not stop!\n");
|
|
|
|
/* Page count on TxQ */
|
|
i = 200;
|
|
while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) ||
|
|
(mt76_rr(dev, 0x0a30) & 0x000000ff) ||
|
|
(mt76_rr(dev, 0x0a34) & 0x00ff00ff)))
|
|
msleep(10);
|
|
|
|
if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000))
|
|
dev_warn(dev->mt76.dev, "Warning: MAC TX did not stop!\n");
|
|
|
|
mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX |
|
|
MT_MAC_SYS_CTRL_ENABLE_TX);
|
|
|
|
/* Page count on RxQ */
|
|
ok = 0;
|
|
i = 200;
|
|
while (i--) {
|
|
if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) &&
|
|
!mt76_rr(dev, 0x0a30) &&
|
|
!mt76_rr(dev, 0x0a34)) {
|
|
if (ok++ > 5)
|
|
break;
|
|
continue;
|
|
}
|
|
msleep(1);
|
|
}
|
|
|
|
if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000))
|
|
dev_warn(dev->mt76.dev, "Warning: MAC RX did not stop!\n");
|
|
|
|
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000))
|
|
dev_warn(dev->mt76.dev, "Warning: RX DMA did not stop!\n");
|
|
}
|
|
|
|
void mt76x0_mac_stop(struct mt76x0_dev *dev)
|
|
{
|
|
mt76x0_mac_stop_hw(dev);
|
|
flush_delayed_work(&dev->stat_work);
|
|
cancel_delayed_work_sync(&dev->stat_work);
|
|
}
|
|
|
|
static void mt76x0_stop_hardware(struct mt76x0_dev *dev)
|
|
{
|
|
mt76x0_chip_onoff(dev, false, false);
|
|
}
|
|
|
|
int mt76x0_init_hardware(struct mt76x0_dev *dev, bool reset)
|
|
{
|
|
static const u16 beacon_offsets[16] = {
|
|
/* 512 byte per beacon */
|
|
0xc000, 0xc200, 0xc400, 0xc600,
|
|
0xc800, 0xca00, 0xcc00, 0xce00,
|
|
0xd000, 0xd200, 0xd400, 0xd600,
|
|
0xd800, 0xda00, 0xdc00, 0xde00
|
|
};
|
|
int ret;
|
|
|
|
dev->beacon_offsets = beacon_offsets;
|
|
|
|
mt76x0_chip_onoff(dev, true, reset);
|
|
|
|
ret = mt76x0_wait_asic_ready(dev);
|
|
if (ret)
|
|
goto err;
|
|
ret = mt76x0_mcu_init(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!mt76_poll_msec(dev, MT_WPDMA_GLO_CFG,
|
|
MT_WPDMA_GLO_CFG_TX_DMA_BUSY |
|
|
MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 100)) {
|
|
ret = -EIO;
|
|
goto err;
|
|
}
|
|
|
|
/* Wait for ASIC ready after FW load. */
|
|
ret = mt76x0_wait_asic_ready(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
mt76x0_reset_csr_bbp(dev);
|
|
mt76x0_init_usb_dma(dev);
|
|
|
|
mt76_wr(dev, MT_HEADER_TRANS_CTRL_REG, 0x0);
|
|
mt76_wr(dev, MT_TSO_CTRL, 0x0);
|
|
|
|
ret = mt76x0_mcu_cmd_init(dev);
|
|
if (ret)
|
|
goto err;
|
|
ret = mt76x0_dma_init(dev);
|
|
if (ret)
|
|
goto err_mcu;
|
|
|
|
mt76x0_init_mac_registers(dev);
|
|
|
|
if (!mt76_poll_msec(dev, MT_MAC_STATUS,
|
|
MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, 0, 1000)) {
|
|
ret = -EIO;
|
|
goto err_rx;
|
|
}
|
|
|
|
ret = mt76x0_init_bbp(dev);
|
|
if (ret)
|
|
goto err_rx;
|
|
|
|
ret = mt76x0_init_wcid_mem(dev);
|
|
if (ret)
|
|
goto err_rx;
|
|
ret = mt76x0_init_key_mem(dev);
|
|
if (ret)
|
|
goto err_rx;
|
|
ret = mt76x0_init_wcid_attr_mem(dev);
|
|
if (ret)
|
|
goto err_rx;
|
|
|
|
mt76_clear(dev, MT_BEACON_TIME_CFG, (MT_BEACON_TIME_CFG_TIMER_EN |
|
|
MT_BEACON_TIME_CFG_SYNC_MODE |
|
|
MT_BEACON_TIME_CFG_TBTT_EN |
|
|
MT_BEACON_TIME_CFG_BEACON_TX));
|
|
|
|
mt76x0_reset_counters(dev);
|
|
|
|
mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e);
|
|
|
|
mt76_wr(dev, MT_TXOP_CTRL_CFG,
|
|
FIELD_PREP(MT_TXOP_TRUN_EN, 0x3f) |
|
|
FIELD_PREP(MT_TXOP_EXT_CCA_DLY, 0x58));
|
|
|
|
ret = mt76x0_eeprom_init(dev);
|
|
if (ret)
|
|
goto err_rx;
|
|
|
|
mt76x0_phy_init(dev);
|
|
return 0;
|
|
|
|
err_rx:
|
|
mt76x0_dma_cleanup(dev);
|
|
err_mcu:
|
|
mt76x0_mcu_cmd_deinit(dev);
|
|
err:
|
|
mt76x0_chip_onoff(dev, false, false);
|
|
return ret;
|
|
}
|
|
|
|
void mt76x0_cleanup(struct mt76x0_dev *dev)
|
|
{
|
|
if (!test_and_clear_bit(MT76_STATE_INITIALIZED, &dev->mt76.state))
|
|
return;
|
|
|
|
mt76x0_stop_hardware(dev);
|
|
mt76x0_dma_cleanup(dev);
|
|
mt76x0_mcu_cmd_deinit(dev);
|
|
}
|
|
|
|
struct mt76x0_dev *mt76x0_alloc_device(struct device *pdev)
|
|
{
|
|
struct ieee80211_hw *hw;
|
|
struct mt76x0_dev *dev;
|
|
|
|
hw = ieee80211_alloc_hw(sizeof(*dev), &mt76x0_ops);
|
|
if (!hw)
|
|
return NULL;
|
|
|
|
dev = hw->priv;
|
|
dev->mt76.dev = pdev;
|
|
dev->mt76.hw = hw;
|
|
mutex_init(&dev->usb_ctrl_mtx);
|
|
mutex_init(&dev->reg_atomic_mutex);
|
|
mutex_init(&dev->hw_atomic_mutex);
|
|
mutex_init(&dev->mutex);
|
|
spin_lock_init(&dev->tx_lock);
|
|
spin_lock_init(&dev->rx_lock);
|
|
spin_lock_init(&dev->mt76.lock);
|
|
spin_lock_init(&dev->mac_lock);
|
|
spin_lock_init(&dev->con_mon_lock);
|
|
atomic_set(&dev->avg_ampdu_len, 1);
|
|
skb_queue_head_init(&dev->tx_skb_done);
|
|
|
|
dev->stat_wq = alloc_workqueue("mt76x0", WQ_UNBOUND, 0);
|
|
if (!dev->stat_wq) {
|
|
ieee80211_free_hw(hw);
|
|
return NULL;
|
|
}
|
|
|
|
return dev;
|
|
}
|
|
|
|
#define CHAN2G(_idx, _freq) { \
|
|
.band = NL80211_BAND_2GHZ, \
|
|
.center_freq = (_freq), \
|
|
.hw_value = (_idx), \
|
|
.max_power = 30, \
|
|
}
|
|
|
|
static const struct ieee80211_channel mt76_channels_2ghz[] = {
|
|
CHAN2G(1, 2412),
|
|
CHAN2G(2, 2417),
|
|
CHAN2G(3, 2422),
|
|
CHAN2G(4, 2427),
|
|
CHAN2G(5, 2432),
|
|
CHAN2G(6, 2437),
|
|
CHAN2G(7, 2442),
|
|
CHAN2G(8, 2447),
|
|
CHAN2G(9, 2452),
|
|
CHAN2G(10, 2457),
|
|
CHAN2G(11, 2462),
|
|
CHAN2G(12, 2467),
|
|
CHAN2G(13, 2472),
|
|
CHAN2G(14, 2484),
|
|
};
|
|
|
|
#define CHAN5G(_idx, _freq) { \
|
|
.band = NL80211_BAND_5GHZ, \
|
|
.center_freq = (_freq), \
|
|
.hw_value = (_idx), \
|
|
.max_power = 30, \
|
|
}
|
|
|
|
static const struct ieee80211_channel mt76_channels_5ghz[] = {
|
|
CHAN5G(36, 5180),
|
|
CHAN5G(40, 5200),
|
|
CHAN5G(44, 5220),
|
|
CHAN5G(46, 5230),
|
|
CHAN5G(48, 5240),
|
|
CHAN5G(52, 5260),
|
|
CHAN5G(56, 5280),
|
|
CHAN5G(60, 5300),
|
|
CHAN5G(64, 5320),
|
|
|
|
CHAN5G(100, 5500),
|
|
CHAN5G(104, 5520),
|
|
CHAN5G(108, 5540),
|
|
CHAN5G(112, 5560),
|
|
CHAN5G(116, 5580),
|
|
CHAN5G(120, 5600),
|
|
CHAN5G(124, 5620),
|
|
CHAN5G(128, 5640),
|
|
CHAN5G(132, 5660),
|
|
CHAN5G(136, 5680),
|
|
CHAN5G(140, 5700),
|
|
};
|
|
|
|
#define CCK_RATE(_idx, _rate) { \
|
|
.bitrate = _rate, \
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE, \
|
|
.hw_value = (MT_PHY_TYPE_CCK << 8) | _idx, \
|
|
.hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + _idx), \
|
|
}
|
|
|
|
#define OFDM_RATE(_idx, _rate) { \
|
|
.bitrate = _rate, \
|
|
.hw_value = (MT_PHY_TYPE_OFDM << 8) | _idx, \
|
|
.hw_value_short = (MT_PHY_TYPE_OFDM << 8) | _idx, \
|
|
}
|
|
|
|
static struct ieee80211_rate mt76_rates[] = {
|
|
CCK_RATE(0, 10),
|
|
CCK_RATE(1, 20),
|
|
CCK_RATE(2, 55),
|
|
CCK_RATE(3, 110),
|
|
OFDM_RATE(0, 60),
|
|
OFDM_RATE(1, 90),
|
|
OFDM_RATE(2, 120),
|
|
OFDM_RATE(3, 180),
|
|
OFDM_RATE(4, 240),
|
|
OFDM_RATE(5, 360),
|
|
OFDM_RATE(6, 480),
|
|
OFDM_RATE(7, 540),
|
|
};
|
|
|
|
static int
|
|
mt76_init_sband(struct mt76x0_dev *dev, struct ieee80211_supported_band *sband,
|
|
const struct ieee80211_channel *chan, int n_chan,
|
|
struct ieee80211_rate *rates, int n_rates)
|
|
{
|
|
struct ieee80211_sta_ht_cap *ht_cap;
|
|
void *chanlist;
|
|
int size;
|
|
|
|
size = n_chan * sizeof(*chan);
|
|
chanlist = devm_kmemdup(dev->mt76.dev, chan, size, GFP_KERNEL);
|
|
if (!chanlist)
|
|
return -ENOMEM;
|
|
|
|
sband->channels = chanlist;
|
|
sband->n_channels = n_chan;
|
|
sband->bitrates = rates;
|
|
sband->n_bitrates = n_rates;
|
|
|
|
ht_cap = &sband->ht_cap;
|
|
ht_cap->ht_supported = true;
|
|
ht_cap->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
|
|
IEEE80211_HT_CAP_GRN_FLD |
|
|
IEEE80211_HT_CAP_SGI_20 |
|
|
IEEE80211_HT_CAP_SGI_40 |
|
|
(1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
|
|
|
|
ht_cap->mcs.rx_mask[0] = 0xff;
|
|
ht_cap->mcs.rx_mask[4] = 0x1;
|
|
ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
|
|
ht_cap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
|
|
ht_cap->ampdu_density = IEEE80211_HT_MPDU_DENSITY_2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mt76_init_sband_2g(struct mt76x0_dev *dev)
|
|
{
|
|
dev->mt76.hw->wiphy->bands[NL80211_BAND_2GHZ] = &dev->mt76.sband_2g.sband;
|
|
|
|
WARN_ON(dev->ee->reg.start - 1 + dev->ee->reg.num >
|
|
ARRAY_SIZE(mt76_channels_2ghz));
|
|
|
|
|
|
return mt76_init_sband(dev, &dev->mt76.sband_2g.sband,
|
|
mt76_channels_2ghz, ARRAY_SIZE(mt76_channels_2ghz),
|
|
mt76_rates, ARRAY_SIZE(mt76_rates));
|
|
}
|
|
|
|
static int
|
|
mt76_init_sband_5g(struct mt76x0_dev *dev)
|
|
{
|
|
dev->mt76.hw->wiphy->bands[NL80211_BAND_5GHZ] = &dev->mt76.sband_5g.sband;
|
|
|
|
return mt76_init_sband(dev, &dev->mt76.sband_5g.sband,
|
|
mt76_channels_5ghz, ARRAY_SIZE(mt76_channels_5ghz),
|
|
mt76_rates + 4, ARRAY_SIZE(mt76_rates) - 4);
|
|
}
|
|
|
|
|
|
int mt76x0_register_device(struct mt76x0_dev *dev)
|
|
{
|
|
struct ieee80211_hw *hw = dev->mt76.hw;
|
|
struct wiphy *wiphy = hw->wiphy;
|
|
int ret;
|
|
|
|
/* Reserve WCID 0 for mcast - thanks to this APs WCID will go to
|
|
* entry no. 1 like it does in the vendor driver.
|
|
*/
|
|
dev->wcid_mask[0] |= 1;
|
|
|
|
/* init fake wcid for monitor interfaces */
|
|
dev->mon_wcid = devm_kmalloc(dev->mt76.dev, sizeof(*dev->mon_wcid),
|
|
GFP_KERNEL);
|
|
if (!dev->mon_wcid)
|
|
return -ENOMEM;
|
|
dev->mon_wcid->idx = 0xff;
|
|
dev->mon_wcid->hw_key_idx = -1;
|
|
|
|
SET_IEEE80211_DEV(hw, dev->mt76.dev);
|
|
|
|
hw->queues = 4;
|
|
ieee80211_hw_set(hw, SIGNAL_DBM);
|
|
ieee80211_hw_set(hw, PS_NULLFUNC_STACK);
|
|
ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
|
|
ieee80211_hw_set(hw, AMPDU_AGGREGATION);
|
|
ieee80211_hw_set(hw, SUPPORTS_RC_TABLE);
|
|
ieee80211_hw_set(hw, MFP_CAPABLE);
|
|
hw->max_rates = 1;
|
|
hw->max_report_rates = 7;
|
|
hw->max_rate_tries = 1;
|
|
|
|
hw->sta_data_size = sizeof(struct mt76_sta);
|
|
hw->vif_data_size = sizeof(struct mt76_vif);
|
|
|
|
SET_IEEE80211_PERM_ADDR(hw, dev->macaddr);
|
|
|
|
wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR;
|
|
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
|
|
|
|
if (dev->ee->has_2ghz) {
|
|
ret = mt76_init_sband_2g(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (dev->ee->has_5ghz) {
|
|
ret = mt76_init_sband_5g(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
dev->mt76.chandef.chan = &dev->mt76.sband_2g.sband.channels[0];
|
|
|
|
INIT_DELAYED_WORK(&dev->mac_work, mt76x0_mac_work);
|
|
INIT_DELAYED_WORK(&dev->stat_work, mt76x0_tx_stat);
|
|
|
|
ret = ieee80211_register_hw(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt76x0_init_debugfs(dev);
|
|
|
|
return 0;
|
|
}
|