6db4831e98
Android 14
719 lines
18 KiB
C
719 lines
18 KiB
C
/*
|
|
* SPEAr platform PLGPIO driver
|
|
*
|
|
* Copyright (C) 2012 ST Microelectronics
|
|
* Viresh Kumar <viresh.kumar@linaro.org>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define MAX_GPIO_PER_REG 32
|
|
#define PIN_OFFSET(pin) (pin % MAX_GPIO_PER_REG)
|
|
#define REG_OFFSET(base, reg, pin) (base + reg + (pin / MAX_GPIO_PER_REG) \
|
|
* sizeof(int *))
|
|
|
|
/*
|
|
* plgpio pins in all machines are not one to one mapped, bitwise with registers
|
|
* bits. These set of macros define register masks for which below functions
|
|
* (pin_to_offset and offset_to_pin) are required to be called.
|
|
*/
|
|
#define PTO_ENB_REG 0x001
|
|
#define PTO_WDATA_REG 0x002
|
|
#define PTO_DIR_REG 0x004
|
|
#define PTO_IE_REG 0x008
|
|
#define PTO_RDATA_REG 0x010
|
|
#define PTO_MIS_REG 0x020
|
|
|
|
struct plgpio_regs {
|
|
u32 enb; /* enable register */
|
|
u32 wdata; /* write data register */
|
|
u32 dir; /* direction set register */
|
|
u32 rdata; /* read data register */
|
|
u32 ie; /* interrupt enable register */
|
|
u32 mis; /* mask interrupt status register */
|
|
u32 eit; /* edge interrupt type */
|
|
};
|
|
|
|
/*
|
|
* struct plgpio: plgpio driver specific structure
|
|
*
|
|
* lock: lock for guarding gpio registers
|
|
* base: base address of plgpio block
|
|
* chip: gpio framework specific chip information structure
|
|
* p2o: function ptr for pin to offset conversion. This is required only for
|
|
* machines where mapping b/w pin and offset is not 1-to-1.
|
|
* o2p: function ptr for offset to pin conversion. This is required only for
|
|
* machines where mapping b/w pin and offset is not 1-to-1.
|
|
* p2o_regs: mask of registers for which p2o and o2p are applicable
|
|
* regs: register offsets
|
|
* csave_regs: context save registers for standby/sleep/hibernate cases
|
|
*/
|
|
struct plgpio {
|
|
spinlock_t lock;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct gpio_chip chip;
|
|
int (*p2o)(int pin); /* pin_to_offset */
|
|
int (*o2p)(int offset); /* offset_to_pin */
|
|
u32 p2o_regs;
|
|
struct plgpio_regs regs;
|
|
#ifdef CONFIG_PM_SLEEP
|
|
struct plgpio_regs *csave_regs;
|
|
#endif
|
|
};
|
|
|
|
/* register manipulation inline functions */
|
|
static inline u32 is_plgpio_set(void __iomem *base, u32 pin, u32 reg)
|
|
{
|
|
u32 offset = PIN_OFFSET(pin);
|
|
void __iomem *reg_off = REG_OFFSET(base, reg, pin);
|
|
u32 val = readl_relaxed(reg_off);
|
|
|
|
return !!(val & (1 << offset));
|
|
}
|
|
|
|
static inline void plgpio_reg_set(void __iomem *base, u32 pin, u32 reg)
|
|
{
|
|
u32 offset = PIN_OFFSET(pin);
|
|
void __iomem *reg_off = REG_OFFSET(base, reg, pin);
|
|
u32 val = readl_relaxed(reg_off);
|
|
|
|
writel_relaxed(val | (1 << offset), reg_off);
|
|
}
|
|
|
|
static inline void plgpio_reg_reset(void __iomem *base, u32 pin, u32 reg)
|
|
{
|
|
u32 offset = PIN_OFFSET(pin);
|
|
void __iomem *reg_off = REG_OFFSET(base, reg, pin);
|
|
u32 val = readl_relaxed(reg_off);
|
|
|
|
writel_relaxed(val & ~(1 << offset), reg_off);
|
|
}
|
|
|
|
/* gpio framework specific routines */
|
|
static int plgpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct plgpio *plgpio = gpiochip_get_data(chip);
|
|
unsigned long flags;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & PTO_DIR_REG)) {
|
|
offset = plgpio->p2o(offset);
|
|
if (offset == -1)
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&plgpio->lock, flags);
|
|
plgpio_reg_set(plgpio->base, offset, plgpio->regs.dir);
|
|
spin_unlock_irqrestore(&plgpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int plgpio_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
struct plgpio *plgpio = gpiochip_get_data(chip);
|
|
unsigned long flags;
|
|
unsigned dir_offset = offset, wdata_offset = offset, tmp;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & (PTO_DIR_REG | PTO_WDATA_REG))) {
|
|
tmp = plgpio->p2o(offset);
|
|
if (tmp == -1)
|
|
return -EINVAL;
|
|
|
|
if (plgpio->p2o_regs & PTO_DIR_REG)
|
|
dir_offset = tmp;
|
|
if (plgpio->p2o_regs & PTO_WDATA_REG)
|
|
wdata_offset = tmp;
|
|
}
|
|
|
|
spin_lock_irqsave(&plgpio->lock, flags);
|
|
if (value)
|
|
plgpio_reg_set(plgpio->base, wdata_offset,
|
|
plgpio->regs.wdata);
|
|
else
|
|
plgpio_reg_reset(plgpio->base, wdata_offset,
|
|
plgpio->regs.wdata);
|
|
|
|
plgpio_reg_reset(plgpio->base, dir_offset, plgpio->regs.dir);
|
|
spin_unlock_irqrestore(&plgpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int plgpio_get_value(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct plgpio *plgpio = gpiochip_get_data(chip);
|
|
|
|
if (offset >= chip->ngpio)
|
|
return -EINVAL;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & PTO_RDATA_REG)) {
|
|
offset = plgpio->p2o(offset);
|
|
if (offset == -1)
|
|
return -EINVAL;
|
|
}
|
|
|
|
return is_plgpio_set(plgpio->base, offset, plgpio->regs.rdata);
|
|
}
|
|
|
|
static void plgpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct plgpio *plgpio = gpiochip_get_data(chip);
|
|
|
|
if (offset >= chip->ngpio)
|
|
return;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & PTO_WDATA_REG)) {
|
|
offset = plgpio->p2o(offset);
|
|
if (offset == -1)
|
|
return;
|
|
}
|
|
|
|
if (value)
|
|
plgpio_reg_set(plgpio->base, offset, plgpio->regs.wdata);
|
|
else
|
|
plgpio_reg_reset(plgpio->base, offset, plgpio->regs.wdata);
|
|
}
|
|
|
|
static int plgpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct plgpio *plgpio = gpiochip_get_data(chip);
|
|
int gpio = chip->base + offset;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (offset >= chip->ngpio)
|
|
return -EINVAL;
|
|
|
|
ret = pinctrl_gpio_request(gpio);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!IS_ERR(plgpio->clk)) {
|
|
ret = clk_enable(plgpio->clk);
|
|
if (ret)
|
|
goto err0;
|
|
}
|
|
|
|
if (plgpio->regs.enb == -1)
|
|
return 0;
|
|
|
|
/*
|
|
* put gpio in IN mode before enabling it. This make enabling gpio safe
|
|
*/
|
|
ret = plgpio_direction_input(chip, offset);
|
|
if (ret)
|
|
goto err1;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & PTO_ENB_REG)) {
|
|
offset = plgpio->p2o(offset);
|
|
if (offset == -1) {
|
|
ret = -EINVAL;
|
|
goto err1;
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&plgpio->lock, flags);
|
|
plgpio_reg_set(plgpio->base, offset, plgpio->regs.enb);
|
|
spin_unlock_irqrestore(&plgpio->lock, flags);
|
|
return 0;
|
|
|
|
err1:
|
|
if (!IS_ERR(plgpio->clk))
|
|
clk_disable(plgpio->clk);
|
|
err0:
|
|
pinctrl_gpio_free(gpio);
|
|
return ret;
|
|
}
|
|
|
|
static void plgpio_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct plgpio *plgpio = gpiochip_get_data(chip);
|
|
int gpio = chip->base + offset;
|
|
unsigned long flags;
|
|
|
|
if (offset >= chip->ngpio)
|
|
return;
|
|
|
|
if (plgpio->regs.enb == -1)
|
|
goto disable_clk;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & PTO_ENB_REG)) {
|
|
offset = plgpio->p2o(offset);
|
|
if (offset == -1)
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&plgpio->lock, flags);
|
|
plgpio_reg_reset(plgpio->base, offset, plgpio->regs.enb);
|
|
spin_unlock_irqrestore(&plgpio->lock, flags);
|
|
|
|
disable_clk:
|
|
if (!IS_ERR(plgpio->clk))
|
|
clk_disable(plgpio->clk);
|
|
|
|
pinctrl_gpio_free(gpio);
|
|
}
|
|
|
|
/* PLGPIO IRQ */
|
|
static void plgpio_irq_disable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct plgpio *plgpio = gpiochip_get_data(gc);
|
|
int offset = d->hwirq;
|
|
unsigned long flags;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & PTO_IE_REG)) {
|
|
offset = plgpio->p2o(offset);
|
|
if (offset == -1)
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&plgpio->lock, flags);
|
|
plgpio_reg_set(plgpio->base, offset, plgpio->regs.ie);
|
|
spin_unlock_irqrestore(&plgpio->lock, flags);
|
|
}
|
|
|
|
static void plgpio_irq_enable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct plgpio *plgpio = gpiochip_get_data(gc);
|
|
int offset = d->hwirq;
|
|
unsigned long flags;
|
|
|
|
/* get correct offset for "offset" pin */
|
|
if (plgpio->p2o && (plgpio->p2o_regs & PTO_IE_REG)) {
|
|
offset = plgpio->p2o(offset);
|
|
if (offset == -1)
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&plgpio->lock, flags);
|
|
plgpio_reg_reset(plgpio->base, offset, plgpio->regs.ie);
|
|
spin_unlock_irqrestore(&plgpio->lock, flags);
|
|
}
|
|
|
|
static int plgpio_irq_set_type(struct irq_data *d, unsigned trigger)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct plgpio *plgpio = gpiochip_get_data(gc);
|
|
int offset = d->hwirq;
|
|
void __iomem *reg_off;
|
|
unsigned int supported_type = 0, val;
|
|
|
|
if (offset >= plgpio->chip.ngpio)
|
|
return -EINVAL;
|
|
|
|
if (plgpio->regs.eit == -1)
|
|
supported_type = IRQ_TYPE_LEVEL_HIGH;
|
|
else
|
|
supported_type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
|
|
if (!(trigger & supported_type))
|
|
return -EINVAL;
|
|
|
|
if (plgpio->regs.eit == -1)
|
|
return 0;
|
|
|
|
reg_off = REG_OFFSET(plgpio->base, plgpio->regs.eit, offset);
|
|
val = readl_relaxed(reg_off);
|
|
|
|
offset = PIN_OFFSET(offset);
|
|
if (trigger & IRQ_TYPE_EDGE_RISING)
|
|
writel_relaxed(val | (1 << offset), reg_off);
|
|
else
|
|
writel_relaxed(val & ~(1 << offset), reg_off);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip plgpio_irqchip = {
|
|
.name = "PLGPIO",
|
|
.irq_enable = plgpio_irq_enable,
|
|
.irq_disable = plgpio_irq_disable,
|
|
.irq_set_type = plgpio_irq_set_type,
|
|
};
|
|
|
|
static void plgpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
struct plgpio *plgpio = gpiochip_get_data(gc);
|
|
struct irq_chip *irqchip = irq_desc_get_chip(desc);
|
|
int regs_count, count, pin, offset, i = 0;
|
|
unsigned long pending;
|
|
|
|
count = plgpio->chip.ngpio;
|
|
regs_count = DIV_ROUND_UP(count, MAX_GPIO_PER_REG);
|
|
|
|
chained_irq_enter(irqchip, desc);
|
|
/* check all plgpio MIS registers for a possible interrupt */
|
|
for (; i < regs_count; i++) {
|
|
pending = readl_relaxed(plgpio->base + plgpio->regs.mis +
|
|
i * sizeof(int *));
|
|
if (!pending)
|
|
continue;
|
|
|
|
/* clear interrupts */
|
|
writel_relaxed(~pending, plgpio->base + plgpio->regs.mis +
|
|
i * sizeof(int *));
|
|
/*
|
|
* clear extra bits in last register having gpios < MAX/REG
|
|
* ex: Suppose there are max 102 plgpios. then last register
|
|
* must have only (102 - MAX_GPIO_PER_REG * 3) = 6 relevant bits
|
|
* so, we must not take other 28 bits into consideration for
|
|
* checking interrupt. so clear those bits.
|
|
*/
|
|
count = count - i * MAX_GPIO_PER_REG;
|
|
if (count < MAX_GPIO_PER_REG)
|
|
pending &= (1 << count) - 1;
|
|
|
|
for_each_set_bit(offset, &pending, MAX_GPIO_PER_REG) {
|
|
/* get correct pin for "offset" */
|
|
if (plgpio->o2p && (plgpio->p2o_regs & PTO_MIS_REG)) {
|
|
pin = plgpio->o2p(offset);
|
|
if (pin == -1)
|
|
continue;
|
|
} else
|
|
pin = offset;
|
|
|
|
/* get correct irq line number */
|
|
pin = i * MAX_GPIO_PER_REG + pin;
|
|
generic_handle_irq(
|
|
irq_find_mapping(gc->irq.domain, pin));
|
|
}
|
|
}
|
|
chained_irq_exit(irqchip, desc);
|
|
}
|
|
|
|
/*
|
|
* pin to offset and offset to pin converter functions
|
|
*
|
|
* In spear310 there is inconsistency among bit positions in plgpio regiseters,
|
|
* for different plgpio pins. For example: for pin 27, bit offset is 23, pin
|
|
* 28-33 are not supported, pin 95 has offset bit 95, bit 100 has offset bit 1
|
|
*/
|
|
static int spear310_p2o(int pin)
|
|
{
|
|
int offset = pin;
|
|
|
|
if (pin <= 27)
|
|
offset += 4;
|
|
else if (pin <= 33)
|
|
offset = -1;
|
|
else if (pin <= 97)
|
|
offset -= 2;
|
|
else if (pin <= 101)
|
|
offset = 101 - pin;
|
|
else
|
|
offset = -1;
|
|
|
|
return offset;
|
|
}
|
|
|
|
static int spear310_o2p(int offset)
|
|
{
|
|
if (offset <= 3)
|
|
return 101 - offset;
|
|
else if (offset <= 31)
|
|
return offset - 4;
|
|
else
|
|
return offset + 2;
|
|
}
|
|
|
|
static int plgpio_probe_dt(struct platform_device *pdev, struct plgpio *plgpio)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
int ret = -EINVAL;
|
|
u32 val;
|
|
|
|
if (of_machine_is_compatible("st,spear310")) {
|
|
plgpio->p2o = spear310_p2o;
|
|
plgpio->o2p = spear310_o2p;
|
|
plgpio->p2o_regs = PTO_WDATA_REG | PTO_DIR_REG | PTO_IE_REG |
|
|
PTO_RDATA_REG | PTO_MIS_REG;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,ngpio", &val)) {
|
|
plgpio->chip.ngpio = val;
|
|
} else {
|
|
dev_err(&pdev->dev, "DT: Invalid ngpio field\n");
|
|
goto end;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,enb-reg", &val))
|
|
plgpio->regs.enb = val;
|
|
else
|
|
plgpio->regs.enb = -1;
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,wdata-reg", &val)) {
|
|
plgpio->regs.wdata = val;
|
|
} else {
|
|
dev_err(&pdev->dev, "DT: Invalid wdata reg\n");
|
|
goto end;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,dir-reg", &val)) {
|
|
plgpio->regs.dir = val;
|
|
} else {
|
|
dev_err(&pdev->dev, "DT: Invalid dir reg\n");
|
|
goto end;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,ie-reg", &val)) {
|
|
plgpio->regs.ie = val;
|
|
} else {
|
|
dev_err(&pdev->dev, "DT: Invalid ie reg\n");
|
|
goto end;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,rdata-reg", &val)) {
|
|
plgpio->regs.rdata = val;
|
|
} else {
|
|
dev_err(&pdev->dev, "DT: Invalid rdata reg\n");
|
|
goto end;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,mis-reg", &val)) {
|
|
plgpio->regs.mis = val;
|
|
} else {
|
|
dev_err(&pdev->dev, "DT: Invalid mis reg\n");
|
|
goto end;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "st-plgpio,eit-reg", &val))
|
|
plgpio->regs.eit = val;
|
|
else
|
|
plgpio->regs.eit = -1;
|
|
|
|
return 0;
|
|
|
|
end:
|
|
return ret;
|
|
}
|
|
static int plgpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct plgpio *plgpio;
|
|
struct resource *res;
|
|
int ret, irq;
|
|
|
|
plgpio = devm_kzalloc(&pdev->dev, sizeof(*plgpio), GFP_KERNEL);
|
|
if (!plgpio)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
plgpio->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(plgpio->base))
|
|
return PTR_ERR(plgpio->base);
|
|
|
|
ret = plgpio_probe_dt(pdev, plgpio);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "DT probe failed\n");
|
|
return ret;
|
|
}
|
|
|
|
plgpio->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(plgpio->clk))
|
|
dev_warn(&pdev->dev, "clk_get() failed, work without it\n");
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
plgpio->csave_regs = devm_kcalloc(&pdev->dev,
|
|
DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG),
|
|
sizeof(*plgpio->csave_regs),
|
|
GFP_KERNEL);
|
|
if (!plgpio->csave_regs)
|
|
return -ENOMEM;
|
|
#endif
|
|
|
|
platform_set_drvdata(pdev, plgpio);
|
|
spin_lock_init(&plgpio->lock);
|
|
|
|
plgpio->chip.base = -1;
|
|
plgpio->chip.request = plgpio_request;
|
|
plgpio->chip.free = plgpio_free;
|
|
plgpio->chip.direction_input = plgpio_direction_input;
|
|
plgpio->chip.direction_output = plgpio_direction_output;
|
|
plgpio->chip.get = plgpio_get_value;
|
|
plgpio->chip.set = plgpio_set_value;
|
|
plgpio->chip.label = dev_name(&pdev->dev);
|
|
plgpio->chip.parent = &pdev->dev;
|
|
plgpio->chip.owner = THIS_MODULE;
|
|
plgpio->chip.of_node = pdev->dev.of_node;
|
|
|
|
if (!IS_ERR(plgpio->clk)) {
|
|
ret = clk_prepare(plgpio->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "clk prepare failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = gpiochip_add_data(&plgpio->chip, plgpio);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to add gpio chip\n");
|
|
goto unprepare_clk;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_info(&pdev->dev, "PLGPIO registered without IRQs\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = gpiochip_irqchip_add(&plgpio->chip,
|
|
&plgpio_irqchip,
|
|
0,
|
|
handle_simple_irq,
|
|
IRQ_TYPE_NONE);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add irqchip to gpiochip\n");
|
|
goto remove_gpiochip;
|
|
}
|
|
|
|
gpiochip_set_chained_irqchip(&plgpio->chip,
|
|
&plgpio_irqchip,
|
|
irq,
|
|
plgpio_irq_handler);
|
|
|
|
dev_info(&pdev->dev, "PLGPIO registered with IRQs\n");
|
|
|
|
return 0;
|
|
|
|
remove_gpiochip:
|
|
dev_info(&pdev->dev, "Remove gpiochip\n");
|
|
gpiochip_remove(&plgpio->chip);
|
|
unprepare_clk:
|
|
if (!IS_ERR(plgpio->clk))
|
|
clk_unprepare(plgpio->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int plgpio_suspend(struct device *dev)
|
|
{
|
|
struct plgpio *plgpio = dev_get_drvdata(dev);
|
|
int i, reg_count = DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG);
|
|
void __iomem *off;
|
|
|
|
for (i = 0; i < reg_count; i++) {
|
|
off = plgpio->base + i * sizeof(int *);
|
|
|
|
if (plgpio->regs.enb != -1)
|
|
plgpio->csave_regs[i].enb =
|
|
readl_relaxed(plgpio->regs.enb + off);
|
|
if (plgpio->regs.eit != -1)
|
|
plgpio->csave_regs[i].eit =
|
|
readl_relaxed(plgpio->regs.eit + off);
|
|
plgpio->csave_regs[i].wdata = readl_relaxed(plgpio->regs.wdata +
|
|
off);
|
|
plgpio->csave_regs[i].dir = readl_relaxed(plgpio->regs.dir +
|
|
off);
|
|
plgpio->csave_regs[i].ie = readl_relaxed(plgpio->regs.ie + off);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This is used to correct the values in end registers. End registers contain
|
|
* extra bits that might be used for other purpose in platform. So, we shouldn't
|
|
* overwrite these bits. This macro, reads given register again, preserves other
|
|
* bit values (non-plgpio bits), and retain captured value (plgpio bits).
|
|
*/
|
|
#define plgpio_prepare_reg(__reg, _off, _mask, _tmp) \
|
|
{ \
|
|
_tmp = readl_relaxed(plgpio->regs.__reg + _off); \
|
|
_tmp &= ~_mask; \
|
|
plgpio->csave_regs[i].__reg = \
|
|
_tmp | (plgpio->csave_regs[i].__reg & _mask); \
|
|
}
|
|
|
|
static int plgpio_resume(struct device *dev)
|
|
{
|
|
struct plgpio *plgpio = dev_get_drvdata(dev);
|
|
int i, reg_count = DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG);
|
|
void __iomem *off;
|
|
u32 mask, tmp;
|
|
|
|
for (i = 0; i < reg_count; i++) {
|
|
off = plgpio->base + i * sizeof(int *);
|
|
|
|
if (i == reg_count - 1) {
|
|
mask = (1 << (plgpio->chip.ngpio - i *
|
|
MAX_GPIO_PER_REG)) - 1;
|
|
|
|
if (plgpio->regs.enb != -1)
|
|
plgpio_prepare_reg(enb, off, mask, tmp);
|
|
|
|
if (plgpio->regs.eit != -1)
|
|
plgpio_prepare_reg(eit, off, mask, tmp);
|
|
|
|
plgpio_prepare_reg(wdata, off, mask, tmp);
|
|
plgpio_prepare_reg(dir, off, mask, tmp);
|
|
plgpio_prepare_reg(ie, off, mask, tmp);
|
|
}
|
|
|
|
writel_relaxed(plgpio->csave_regs[i].wdata, plgpio->regs.wdata +
|
|
off);
|
|
writel_relaxed(plgpio->csave_regs[i].dir, plgpio->regs.dir +
|
|
off);
|
|
|
|
if (plgpio->regs.eit != -1)
|
|
writel_relaxed(plgpio->csave_regs[i].eit,
|
|
plgpio->regs.eit + off);
|
|
|
|
writel_relaxed(plgpio->csave_regs[i].ie, plgpio->regs.ie + off);
|
|
|
|
if (plgpio->regs.enb != -1)
|
|
writel_relaxed(plgpio->csave_regs[i].enb,
|
|
plgpio->regs.enb + off);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(plgpio_dev_pm_ops, plgpio_suspend, plgpio_resume);
|
|
|
|
static const struct of_device_id plgpio_of_match[] = {
|
|
{ .compatible = "st,spear-plgpio" },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver plgpio_driver = {
|
|
.probe = plgpio_probe,
|
|
.driver = {
|
|
.name = "spear-plgpio",
|
|
.pm = &plgpio_dev_pm_ops,
|
|
.of_match_table = plgpio_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init plgpio_init(void)
|
|
{
|
|
return platform_driver_register(&plgpio_driver);
|
|
}
|
|
subsys_initcall(plgpio_init);
|