6db4831e98
Android 14
5635 lines
155 KiB
C
5635 lines
155 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2021 MediaTek Inc.
|
|
*/
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* Filename:
|
|
* ---------
|
|
* battery_common.c
|
|
*
|
|
* Project:
|
|
* --------
|
|
* Android_Software
|
|
*
|
|
* Description:
|
|
* ------------
|
|
* This Module defines functions of mt6323 Battery charging algorithm
|
|
* and the Anroid Battery service for updating the battery status
|
|
*
|
|
* Author:
|
|
* -------
|
|
* Oscar Liu
|
|
*
|
|
****************************************************************************/
|
|
#include <linux/cdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/device.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h> /* For init/exit macros */
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/module.h> /* For MODULE_ marcros */
|
|
#include <linux/mutex.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/time.h>
|
|
#include <linux/types.h>
|
|
#include <linux/wait.h>
|
|
#ifdef CONFIG_OF
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#endif
|
|
#include <linux/reboot.h>
|
|
#include <linux/suspend.h>
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <linux/mfd/mt6397/rtc_misc.h>
|
|
#include <mt-plat/mtk_boot.h>
|
|
|
|
#include <mach/mt_charging.h>
|
|
#include <mt-plat/upmu_common.h>
|
|
|
|
#include <mach/mt_battery_meter.h>
|
|
#include <mach/mt_charging.h>
|
|
#include <mt-plat/battery_common.h>
|
|
#include <mt-plat/battery_meter.h>
|
|
#include <mt-plat/charging.h>
|
|
#if defined(CONFIG_ARCH_MT6735) || defined(CONFIG_ARCH_MT6735M) || \
|
|
defined(CONFIG_ARCH_MT6753)
|
|
#include <mach/mt_pmic_wrap.h>
|
|
#endif
|
|
|
|
#include "mtk_pep20_intf.h"
|
|
#include "mtk_pep_intf.h"
|
|
#if defined(CONFIG_ONTIM_POWER_DRIVER)
|
|
#include <mach/mt_charging_sel_intf.h>
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT) || \
|
|
defined(CONFIG_MTK_PUMP_EXPRESS_PLUS_SUPPORT)
|
|
#ifndef PUMP_EXPRESS_SERIES
|
|
#define PUMP_EXPRESS_SERIES
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_PLUS_20_SUPPORT)
|
|
#ifndef PUMP_EXPRESS_SERIES
|
|
#define PUMP_EXPRESS_SERIES
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
#include <mt-plat/diso.h>
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_PLUS_SUPPORT)
|
|
#include <mach/mt_pe.h>
|
|
#endif
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* Battery Logging Entry */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
int Enable_BATDRV_LOG = BAT_LOG_CRTI;
|
|
|
|
/* ///////////////////////////////////////////////////////////////////////// */
|
|
/* // Smart Battery Structure */
|
|
/* ///////////////////////////////////////////////////////////////////////// */
|
|
PMU_ChargerStruct BMT_status;
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
DISO_ChargerStruct DISO_data;
|
|
/* Debug Msg */
|
|
static char *DISO_state_s[8] = {
|
|
"IDLE", "OTG_ONLY", "USB_ONLY", "USB_WITH_OTG",
|
|
"DC_ONLY", "DC_WITH_OTG", "DC_WITH_USB", "DC_USB_OTG",
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* Thermal related flags
|
|
*/
|
|
int g_battery_thermal_throttling_flag = 3;
|
|
/* 0:nothing,
|
|
* 1:enable batTT&chrTimer,
|
|
* 2:disable batTT&chrTimer,
|
|
* 3:enable batTT,
|
|
* disable chrTimer
|
|
*/
|
|
int battery_cmd_thermal_test_mode;
|
|
int battery_cmd_thermal_test_mode_value;
|
|
int g_battery_tt_check_flag;
|
|
/* 0:default enable check batteryTT, 1:default disable check batteryTT */
|
|
|
|
/*
|
|
* Global Variable
|
|
*/
|
|
enum kal_bool gDisableGM;
|
|
struct wakeup_source *battery_suspend_lock;
|
|
struct wakeup_source *battery_fg_lock;
|
|
CHARGING_CONTROL battery_charging_control;
|
|
unsigned int g_BatteryNotifyCode;
|
|
unsigned int g_BN_TestMode;
|
|
enum kal_bool g_bat_init_flag;
|
|
unsigned int g_call_state = CALL_IDLE;
|
|
enum kal_bool g_charging_full_reset_bat_meter;
|
|
int g_platform_boot_mode;
|
|
struct timespec g_bat_time_before_sleep;
|
|
int g_smartbook_update;
|
|
int cable_in_uevent;
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
enum kal_bool g_vcdt_irq_delay_flag;
|
|
#endif
|
|
|
|
enum kal_bool skip_battery_update;
|
|
|
|
unsigned int g_batt_temp_status = TEMP_POS_NORMAL;
|
|
|
|
enum kal_bool battery_suspended;
|
|
/* #ifdef MTK_ENABLE_AGING_ALGORITHM
|
|
* extern unsigned int suspend_time;
|
|
* #endif
|
|
*/
|
|
|
|
#if defined(CUST_SYSTEM_OFF_VOLTAGE)
|
|
#define SYSTEM_OFF_VOLTAGE CUST_SYSTEM_OFF_VOLTAGE
|
|
#endif
|
|
|
|
#if !defined(CONFIG_POWER_EXT)
|
|
static unsigned int V_0Percent_Tracking = V_0PERCENT_TRACKING;
|
|
#endif
|
|
|
|
struct battery_custom_data batt_cust_data;
|
|
|
|
/*
|
|
* Integrate with NVRAM
|
|
*/
|
|
#define ADC_CALI_DEVNAME "MT_pmic_adc_cali"
|
|
#define TEST_ADC_CALI_PRINT _IO('k', 0)
|
|
#define SET_ADC_CALI_Slop _IOW('k', 1, int)
|
|
#define SET_ADC_CALI_Offset _IOW('k', 2, int)
|
|
#define SET_ADC_CALI_Cal _IOW('k', 3, int)
|
|
#define ADC_CHANNEL_READ _IOW('k', 4, int)
|
|
#define BAT_STATUS_READ _IOW('k', 5, int)
|
|
#define Set_Charger_Current _IOW('k', 6, int)
|
|
/* add for meta tool----------------------------------------- */
|
|
#define Get_META_BAT_VOL _IOW('k', 10, int)
|
|
#define Get_META_BAT_SOC _IOW('k', 11, int)
|
|
/* add for meta tool----------------------------------------- */
|
|
|
|
static struct class *adc_cali_class;
|
|
static int adc_cali_major;
|
|
static dev_t adc_cali_devno;
|
|
static struct cdev *adc_cali_cdev;
|
|
|
|
int adc_cali_slop[14] = {1000, 1000, 1000, 1000, 1000, 1000, 1000,
|
|
1000, 1000, 1000, 1000, 1000, 1000, 1000};
|
|
|
|
int adc_cali_offset[14] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
|
int adc_cali_cal[1] = {0};
|
|
int battery_in_data[1] = {0};
|
|
int battery_out_data[1] = {0};
|
|
int charging_level_data[1] = {0};
|
|
|
|
enum kal_bool g_ADC_Cali;
|
|
enum kal_bool g_ftm_battery_flag;
|
|
#if !defined(CONFIG_POWER_EXT)
|
|
static int g_wireless_state;
|
|
#endif
|
|
|
|
/*
|
|
* Thread related
|
|
*/
|
|
#define BAT_MS_TO_NS(x) (x * 1000 * 1000)
|
|
static enum kal_bool bat_thread_timeout;
|
|
/* charger in/out to wake up battery thread */
|
|
static enum kal_bool chr_wake_up_bat;
|
|
static enum kal_bool fg_wake_up_bat;
|
|
static enum kal_bool bat_meter_timeout;
|
|
static DEFINE_MUTEX(bat_mutex);
|
|
static DEFINE_MUTEX(charger_type_mutex);
|
|
static DECLARE_WAIT_QUEUE_HEAD(bat_thread_wq);
|
|
static struct hrtimer charger_hv_detect_timer;
|
|
static struct task_struct *charger_hv_detect_thread;
|
|
static enum kal_bool charger_hv_detect_flag;
|
|
static DECLARE_WAIT_QUEUE_HEAD(charger_hv_detect_waiter);
|
|
static struct hrtimer battery_kthread_timer;
|
|
enum kal_bool g_battery_soc_ready;
|
|
/*extern BOOL bat_spm_timeout;
|
|
*extern unsigned int _g_bat_sleep_total_time;
|
|
*/
|
|
|
|
/*
|
|
* FOR ADB CMD
|
|
*/
|
|
/* Dual battery */
|
|
int g_status_smb = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
int g_capacity_smb = 50;
|
|
int g_present_smb;
|
|
/* ADB charging CMD */
|
|
static int cmd_discharging = -1;
|
|
static int adjust_power = -1;
|
|
static int suspend_discharging = -1;
|
|
|
|
static int chrdet_irq;
|
|
|
|
#if !defined(CONFIG_POWER_EXT)
|
|
static int is_uisoc_ever_100;
|
|
#endif
|
|
#if defined(CONFIG_ONTIM_POWER_DRIVER)
|
|
enum kal_bool chargin_hw_init_done;
|
|
#endif
|
|
/***************************************************************
|
|
* FOR ANDROID BATTERY SERVICE
|
|
***************************************************************/
|
|
|
|
struct wireless_data {
|
|
struct power_supply_desc psd;
|
|
struct power_supply *psy;
|
|
int WIRELESS_ONLINE;
|
|
};
|
|
|
|
struct ac_data {
|
|
struct power_supply_desc psd;
|
|
struct power_supply *psy;
|
|
int AC_ONLINE;
|
|
};
|
|
|
|
struct usb_data {
|
|
struct power_supply_desc psd;
|
|
struct power_supply *psy;
|
|
int USB_ONLINE;
|
|
};
|
|
|
|
struct battery_data {
|
|
struct power_supply_desc psd;
|
|
struct power_supply *psy;
|
|
int BAT_STATUS;
|
|
int BAT_HEALTH;
|
|
int BAT_PRESENT;
|
|
int BAT_TECHNOLOGY;
|
|
int BAT_CAPACITY;
|
|
/* Add for Battery Service */
|
|
int BAT_batt_vol;
|
|
int BAT_batt_temp;
|
|
/* Add for EM */
|
|
int BAT_TemperatureR;
|
|
int BAT_TempBattVoltage;
|
|
int BAT_InstatVolt;
|
|
int BAT_BatteryAverageCurrent;
|
|
int BAT_BatterySenseVoltage;
|
|
int BAT_ISenseVoltage;
|
|
int BAT_ChargerVoltage;
|
|
int BAT_CURRENT_NOW;
|
|
/* Dual battery */
|
|
int status_smb;
|
|
int capacity_smb;
|
|
int present_smb;
|
|
int adjust_power;
|
|
};
|
|
|
|
static enum power_supply_property wireless_props[] = {
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
};
|
|
|
|
static enum power_supply_property ac_props[] = {
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
};
|
|
|
|
static enum power_supply_property usb_props[] = {
|
|
POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_CURRENT_MAX,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MAX, POWER_SUPPLY_PROP_CHARGE_COUNTER};
|
|
|
|
static enum power_supply_property battery_props[] = {
|
|
POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_TECHNOLOGY,
|
|
POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CURRENT_AVG,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_CHARGE_FULL,
|
|
POWER_SUPPLY_PROP_CHARGE_COUNTER, POWER_SUPPLY_PROP_TEMP,
|
|
POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
|
|
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
|
|
};
|
|
|
|
/*void check_battery_exist(void);*/
|
|
void charging_suspend_enable(void)
|
|
{
|
|
unsigned int charging_enable = true;
|
|
|
|
suspend_discharging = 0;
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
}
|
|
|
|
void charging_suspend_disable(void)
|
|
{
|
|
unsigned int charging_enable = false;
|
|
|
|
suspend_discharging = 1;
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
}
|
|
|
|
int read_tbat_value(void)
|
|
{
|
|
return BMT_status.temperature;
|
|
}
|
|
|
|
int get_charger_detect_status(void)
|
|
{
|
|
enum kal_bool chr_status;
|
|
|
|
battery_charging_control(CHARGING_CMD_GET_CHARGER_DET_STATUS,
|
|
&chr_status);
|
|
return chr_status;
|
|
}
|
|
|
|
#if defined(CONFIG_MTK_POWER_EXT_DETECT)
|
|
enum kal_bool bat_is_ext_power(void)
|
|
{
|
|
enum kal_bool pwr_src = 0;
|
|
|
|
battery_charging_control(CHARGING_CMD_GET_POWER_SOURCE, &pwr_src);
|
|
battery_log(BAT_LOG_FULL, "[BAT_IS_EXT_POWER] is_ext_power = %d\n",
|
|
pwr_src);
|
|
return pwr_src;
|
|
}
|
|
#endif
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // PMIC PCHR Related APIs */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
bool __attribute__((weak)) mt_usb_is_device(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
enum kal_bool upmu_is_chr_det(void)
|
|
{
|
|
#if !defined(CONFIG_POWER_EXT)
|
|
unsigned int tmp32;
|
|
#endif
|
|
#if defined(CONFIG_ONTIM_POWER_DRIVER)
|
|
int idx = 0;
|
|
|
|
if (battery_charging_control == NULL) {
|
|
for (idx = 0;
|
|
idx < sizeof(charger_candidate_func) /
|
|
sizeof(struct charger_candidate_table);
|
|
idx++) {
|
|
if (charger_candidate_func[idx].exist_fun() == 0) {
|
|
battery_log(BAT_LOG_CRTI, "charger %s found\n",
|
|
charger_candidate_func[idx].name);
|
|
battery_charging_control =
|
|
charger_candidate_func[idx]
|
|
.chr_ctrl_intf;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (battery_charging_control == NULL)
|
|
battery_log(BAT_LOG_CRTI,
|
|
"can't find any charger driver\n");
|
|
}
|
|
#else
|
|
if (battery_charging_control == NULL)
|
|
battery_charging_control = chr_control_interface;
|
|
#endif
|
|
#if defined(CONFIG_POWER_EXT)
|
|
/* return KAL_TRUE; */
|
|
return get_charger_detect_status();
|
|
#else
|
|
if (suspend_discharging == 1)
|
|
return KAL_FALSE;
|
|
|
|
tmp32 = get_charger_detect_status();
|
|
|
|
#ifdef CONFIG_MTK_POWER_EXT_DETECT
|
|
if (bat_is_ext_power() == KAL_TRUE)
|
|
return tmp32;
|
|
#endif
|
|
|
|
if (tmp32 == 0)
|
|
return KAL_FALSE;
|
|
/*else { */
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (mt_usb_is_device()) {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[%s] Charger exist and USB is not host\n",
|
|
__func__);
|
|
|
|
return KAL_TRUE;
|
|
} /*else { */
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[%s] Charger exist but USB is host\n",
|
|
__func__);
|
|
|
|
return KAL_FALSE;
|
|
/*} */
|
|
#else
|
|
return KAL_TRUE;
|
|
#endif
|
|
/*} */
|
|
#endif
|
|
}
|
|
EXPORT_SYMBOL(upmu_is_chr_det);
|
|
|
|
void wake_up_bat(void)
|
|
{
|
|
battery_log(BAT_LOG_FULL, "[BATTERY] %s. \r\n", __func__);
|
|
|
|
chr_wake_up_bat = KAL_TRUE;
|
|
bat_thread_timeout = KAL_TRUE;
|
|
#ifdef MTK_ENABLE_AGING_ALGORITHM
|
|
suspend_time = 0;
|
|
#endif
|
|
battery_meter_reset_sleep_time();
|
|
|
|
wake_up(&bat_thread_wq);
|
|
}
|
|
EXPORT_SYMBOL(wake_up_bat);
|
|
|
|
#ifdef FG_BAT_INT
|
|
void wake_up_bat2(void)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[%s]\r\n", __func__);
|
|
|
|
__pm_stay_awake(battery_fg_lock);
|
|
fg_wake_up_bat = KAL_TRUE;
|
|
bat_thread_timeout = KAL_TRUE;
|
|
#ifdef MTK_ENABLE_AGING_ALGORITHM
|
|
suspend_time = 0;
|
|
#endif
|
|
battery_meter_reset_sleep_time();
|
|
wake_up(&bat_thread_wq);
|
|
}
|
|
EXPORT_SYMBOL(wake_up_bat2);
|
|
#endif /* #ifdef FG_BAT_INT */
|
|
|
|
void wake_up_bat3(void)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[%s]\r\n", __func__);
|
|
|
|
bat_thread_timeout = KAL_TRUE;
|
|
#ifdef MTK_ENABLE_AGING_ALGORITHM
|
|
suspend_time = 0;
|
|
#endif
|
|
battery_meter_reset_sleep_time();
|
|
wake_up(&bat_thread_wq);
|
|
}
|
|
EXPORT_SYMBOL(wake_up_bat3);
|
|
|
|
static ssize_t bat_log_write(struct file *filp, const char __user *buff,
|
|
size_t len, loff_t *data)
|
|
{
|
|
char proc_bat_data;
|
|
|
|
if ((len <= 0) || copy_from_user(&proc_bat_data, buff, 1)) {
|
|
battery_log(BAT_LOG_FULL, "%s error.\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (proc_bat_data == '1') {
|
|
battery_log(BAT_LOG_CRTI, "enable battery driver log system\n");
|
|
Enable_BATDRV_LOG = 1;
|
|
} else if (proc_bat_data == '2') {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"enable battery driver log system:2\n");
|
|
Enable_BATDRV_LOG = 2;
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"Disable battery driver log system\n");
|
|
Enable_BATDRV_LOG = 0;
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static const struct file_operations bat_proc_fops = {
|
|
.write = bat_log_write,
|
|
};
|
|
|
|
int init_proc_log(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
#if 1
|
|
proc_create("batdrv_log", 0644, NULL, &bat_proc_fops);
|
|
battery_log(BAT_LOG_CRTI, "proc_create bat_proc_fops\n");
|
|
#else
|
|
proc_entry = create_proc_entry("batdrv_log", 0644, NULL);
|
|
|
|
if (proc_entry == NULL) {
|
|
ret = -ENOMEM;
|
|
battery_log(BAT_LOG_FULL,
|
|
"%s: Couldn't create proc entry\n",
|
|
__func__);
|
|
} else {
|
|
proc_entry->write_proc = bat_log_write;
|
|
battery_log(BAT_LOG_CRTI, "%s loaded.\n",
|
|
__func__);
|
|
}
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wireless_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret = 0;
|
|
struct wireless_data *data =
|
|
container_of(psy->desc, struct wireless_data, psd);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = data->WIRELESS_ONLINE;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ac_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret = 0;
|
|
struct ac_data *data = container_of(psy->desc, struct ac_data, psd);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = data->AC_ONLINE;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int usb_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret = 0;
|
|
struct usb_data *data = container_of(psy->desc, struct usb_data, psd);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
#if defined(CONFIG_POWER_EXT)
|
|
/* #if 0 */
|
|
data->USB_ONLINE = 1;
|
|
val->intval = data->USB_ONLINE;
|
|
#else
|
|
#if defined(CONFIG_MTK_POWER_EXT_DETECT)
|
|
if (bat_is_ext_power() == KAL_TRUE)
|
|
data->USB_ONLINE = 1;
|
|
#endif
|
|
val->intval = data->USB_ONLINE;
|
|
#endif
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
|
|
val->intval = 5000000;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
|
val->intval = 500000;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_COUNTER:
|
|
val->intval = battery_meter_get_QMAX25() * 1000;
|
|
/* QMAX from battery, ma to ua */
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret = 0;
|
|
struct battery_data *data =
|
|
container_of(psy->desc, struct battery_data, psd);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
val->intval = data->BAT_STATUS;
|
|
break;
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
val->intval = data->BAT_HEALTH;
|
|
break;
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = data->BAT_PRESENT;
|
|
break;
|
|
case POWER_SUPPLY_PROP_TECHNOLOGY:
|
|
val->intval = data->BAT_TECHNOLOGY;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CYCLE_COUNT:
|
|
val->intval = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
val->intval = data->BAT_CAPACITY;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
val->intval = data->BAT_CURRENT_NOW; /* charge_current */
|
|
break;
|
|
case POWER_SUPPLY_PROP_CURRENT_AVG:
|
|
val->intval = data->BAT_BatteryAverageCurrent * 100;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
|
val->intval = 3000000;
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
|
|
val->intval = 5000000;
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
val->intval = data->BAT_batt_vol * 1000;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL:
|
|
val->intval = battery_meter_get_QMAX25() * 1000;
|
|
/* QMAX from battery, ma to ua */
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_COUNTER:
|
|
val->intval = BMT_status.UI_SOC * battery_meter_get_QMAX25() *
|
|
1000 / 100;
|
|
/* QMAX from battery, ma to ua */
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
val->intval = data->BAT_batt_temp;
|
|
break;
|
|
case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
|
|
val->intval = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
|
|
val->intval = battery_meter_get_QMAX25() * 1000;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* wireless_data initialization */
|
|
static struct wireless_data wireless_main = {
|
|
.psd = {
|
|
|
|
|
|
.name = "wireless",
|
|
.type = POWER_SUPPLY_TYPE_WIRELESS,
|
|
.properties = wireless_props,
|
|
.num_properties = ARRAY_SIZE(wireless_props),
|
|
.get_property = wireless_get_property,
|
|
},
|
|
.WIRELESS_ONLINE = 0,
|
|
};
|
|
|
|
/* ac_data initialization */
|
|
static struct ac_data ac_main = {
|
|
.psd = {
|
|
|
|
|
|
.name = "ac",
|
|
.type = POWER_SUPPLY_TYPE_MAINS,
|
|
.properties = ac_props,
|
|
.num_properties = ARRAY_SIZE(ac_props),
|
|
.get_property = ac_get_property,
|
|
},
|
|
.AC_ONLINE = 0,
|
|
};
|
|
|
|
/* usb_data initialization */
|
|
static struct usb_data usb_main = {
|
|
.psd = {
|
|
|
|
|
|
.name = "usb",
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
.properties = usb_props,
|
|
.num_properties = ARRAY_SIZE(usb_props),
|
|
.get_property = usb_get_property,
|
|
},
|
|
.USB_ONLINE = 0,
|
|
};
|
|
|
|
/* battery_data initialization */
|
|
static struct battery_data battery_main = {
|
|
.psd = {
|
|
|
|
|
|
.name = "battery",
|
|
.type = POWER_SUPPLY_TYPE_BATTERY,
|
|
.properties = battery_props,
|
|
.num_properties = ARRAY_SIZE(battery_props),
|
|
.get_property = battery_get_property,
|
|
},
|
|
/* CC: modify to have a full power supply status */
|
|
#if defined(CONFIG_POWER_EXT)
|
|
.BAT_STATUS = POWER_SUPPLY_STATUS_FULL,
|
|
.BAT_HEALTH = POWER_SUPPLY_HEALTH_GOOD,
|
|
.BAT_PRESENT = 1,
|
|
.BAT_TECHNOLOGY = POWER_SUPPLY_TECHNOLOGY_LION,
|
|
.BAT_CAPACITY = 100,
|
|
.BAT_batt_vol = 4200,
|
|
.BAT_batt_temp = 22,
|
|
/* Dual battery */
|
|
.status_smb = POWER_SUPPLY_STATUS_DISCHARGING,
|
|
.capacity_smb = 50,
|
|
.present_smb = 0,
|
|
/* ADB CMD discharging */
|
|
.adjust_power = -1,
|
|
#else
|
|
.BAT_STATUS = POWER_SUPPLY_STATUS_DISCHARGING,
|
|
.BAT_HEALTH = POWER_SUPPLY_HEALTH_GOOD,
|
|
.BAT_PRESENT = 1,
|
|
.BAT_TECHNOLOGY = POWER_SUPPLY_TECHNOLOGY_LION,
|
|
#if defined(PUMP_EXPRESS_SERIES)
|
|
.BAT_CAPACITY = -1,
|
|
#else
|
|
.BAT_CAPACITY = 50,
|
|
#endif
|
|
.BAT_batt_vol = 0,
|
|
.BAT_batt_temp = 0,
|
|
/* Dual battery */
|
|
.status_smb = POWER_SUPPLY_STATUS_DISCHARGING,
|
|
.capacity_smb = 50,
|
|
.present_smb = 0,
|
|
/* ADB CMD discharging */
|
|
.adjust_power = -1,
|
|
#endif
|
|
};
|
|
|
|
#if !defined(CONFIG_POWER_EXT)
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Charger_Voltage */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Charger_Voltage(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] %s : %d\n",
|
|
__func__, BMT_status.charger_vol);
|
|
return sprintf(buf, "%d\n", BMT_status.charger_vol);
|
|
}
|
|
|
|
static ssize_t store_ADC_Charger_Voltage(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Charger_Voltage, 0664, show_ADC_Charger_Voltage,
|
|
store_ADC_Charger_Voltage);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_0_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_0_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 0));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_0_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_0_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_0_Slope, 0664, show_ADC_Channel_0_Slope,
|
|
store_ADC_Channel_0_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_1_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_1_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 1));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_1_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_1_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_1_Slope, 0664, show_ADC_Channel_1_Slope,
|
|
store_ADC_Channel_1_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_2_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_2_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 2));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_2_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_2_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_2_Slope, 0664, show_ADC_Channel_2_Slope,
|
|
store_ADC_Channel_2_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_3_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_3_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 3));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_3_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_3_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_3_Slope, 0664, show_ADC_Channel_3_Slope,
|
|
store_ADC_Channel_3_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_4_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_4_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 4));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_4_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_4_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_4_Slope, 0664, show_ADC_Channel_4_Slope,
|
|
store_ADC_Channel_4_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_5_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_5_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 5));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_5_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_5_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_5_Slope, 0664, show_ADC_Channel_5_Slope,
|
|
store_ADC_Channel_5_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_6_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_6_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 6));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_6_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_6_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_6_Slope, 0664, show_ADC_Channel_6_Slope,
|
|
store_ADC_Channel_6_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_7_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_7_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 7));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_7_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_7_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_7_Slope, 0664, show_ADC_Channel_7_Slope,
|
|
store_ADC_Channel_7_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_8_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_8_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 8));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_8_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_8_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_8_Slope, 0664, show_ADC_Channel_8_Slope,
|
|
store_ADC_Channel_8_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_9_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_9_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 9));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_9_Slope : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_9_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_9_Slope, 0664, show_ADC_Channel_9_Slope,
|
|
store_ADC_Channel_9_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_10_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_10_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 10));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_10_Slope : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_10_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_10_Slope, 0664, show_ADC_Channel_10_Slope,
|
|
store_ADC_Channel_10_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_11_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_11_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 11));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_11_Slope : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_11_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_11_Slope, 0664, show_ADC_Channel_11_Slope,
|
|
store_ADC_Channel_11_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_12_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_12_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 12));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_12_Slope : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_12_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_12_Slope, 0664, show_ADC_Channel_12_Slope,
|
|
store_ADC_Channel_12_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_13_Slope */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_13_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_slop + 13));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_13_Slope: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_13_Slope(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_13_Slope, 0664, show_ADC_Channel_13_Slope,
|
|
store_ADC_Channel_13_Slope);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_0_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_0_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 0));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_0_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_0_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_0_Offset, 0664, show_ADC_Channel_0_Offset,
|
|
store_ADC_Channel_0_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_1_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_1_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 1));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_1_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_1_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_1_Offset, 0664, show_ADC_Channel_1_Offset,
|
|
store_ADC_Channel_1_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_2_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_2_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 2));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_2_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_2_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_2_Offset, 0664, show_ADC_Channel_2_Offset,
|
|
store_ADC_Channel_2_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_3_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_3_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 3));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_3_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_3_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_3_Offset, 0664, show_ADC_Channel_3_Offset,
|
|
store_ADC_Channel_3_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_4_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_4_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 4));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_4_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_4_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_4_Offset, 0664, show_ADC_Channel_4_Offset,
|
|
store_ADC_Channel_4_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_5_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_5_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 5));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_5_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_5_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_5_Offset, 0664, show_ADC_Channel_5_Offset,
|
|
store_ADC_Channel_5_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_6_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_6_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 6));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_6_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_6_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_6_Offset, 0664, show_ADC_Channel_6_Offset,
|
|
store_ADC_Channel_6_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_7_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_7_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 7));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_7_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_7_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_7_Offset, 0664, show_ADC_Channel_7_Offset,
|
|
store_ADC_Channel_7_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_8_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_8_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 8));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_8_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_8_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_8_Offset, 0664, show_ADC_Channel_8_Offset,
|
|
store_ADC_Channel_8_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_9_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_9_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 9));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_9_Offset: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_9_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_9_Offset, 0664, show_ADC_Channel_9_Offset,
|
|
store_ADC_Channel_9_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_10_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_10_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 10));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_10_Offset : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_10_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_10_Offset, 0664, show_ADC_Channel_10_Offset,
|
|
store_ADC_Channel_10_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_11_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_11_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 11));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_11_Offset : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_11_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_11_Offset, 0664, show_ADC_Channel_11_Offset,
|
|
store_ADC_Channel_11_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_12_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_12_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 12));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_12_Offset : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_12_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_12_Offset, 0664, show_ADC_Channel_12_Offset,
|
|
store_ADC_Channel_12_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_13_Offset */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_13_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = (*(adc_cali_offset + 13));
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_13_Offset : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_13_Offset(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_13_Offset, 0664, show_ADC_Channel_13_Offset,
|
|
store_ADC_Channel_13_Offset);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : ADC_Channel_Is_Calibration */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_ADC_Channel_Is_Calibration(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 2;
|
|
|
|
ret_value = g_ADC_Cali;
|
|
battery_log(BAT_LOG_CRTI, "[EM] ADC_Channel_Is_Calibration : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_ADC_Channel_Is_Calibration(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(ADC_Channel_Is_Calibration, 0664,
|
|
show_ADC_Channel_Is_Calibration,
|
|
store_ADC_Channel_Is_Calibration);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : Power_On_Voltage */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_Power_On_Voltage(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = 3400;
|
|
battery_log(BAT_LOG_CRTI, "[EM] Power_On_Voltage : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_Power_On_Voltage(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(Power_On_Voltage, 0664, show_Power_On_Voltage,
|
|
store_Power_On_Voltage);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : Power_Off_Voltage */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_Power_Off_Voltage(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = 3400;
|
|
battery_log(BAT_LOG_CRTI, "[EM] Power_Off_Voltage : %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_Power_Off_Voltage(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(Power_Off_Voltage, 0664, show_Power_Off_Voltage,
|
|
store_Power_Off_Voltage);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : Charger_TopOff_Value */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_Charger_TopOff_Value(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 1;
|
|
|
|
ret_value = 4110;
|
|
battery_log(BAT_LOG_CRTI, "[EM] Charger_TopOff_Value: %d\n", ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_Charger_TopOff_Value(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(Charger_TopOff_Value, 0664, show_Charger_TopOff_Value,
|
|
store_Charger_TopOff_Value);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : FG_Battery_CurrentConsumption */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_FG_Battery_CurrentConsumption(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret_value = 8888;
|
|
|
|
ret_value = battery_meter_get_battery_current();
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[EM] FG_Battery_CurrentConsumption : %d/10 mA\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t
|
|
store_FG_Battery_CurrentConsumption(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(FG_Battery_CurrentConsumption, 0664,
|
|
show_FG_Battery_CurrentConsumption,
|
|
store_FG_Battery_CurrentConsumption);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Create File For EM : FG_SW_CoulombCounter */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_FG_SW_CoulombCounter(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
signed int ret_value = 7777;
|
|
|
|
ret_value = battery_meter_get_car();
|
|
battery_log(BAT_LOG_CRTI, "[EM] FG_SW_CoulombCounter : %d\n",
|
|
ret_value);
|
|
return sprintf(buf, "%u\n", ret_value);
|
|
}
|
|
|
|
static ssize_t store_FG_SW_CoulombCounter(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(FG_SW_CoulombCounter, 0664, show_FG_SW_CoulombCounter,
|
|
store_FG_SW_CoulombCounter);
|
|
|
|
static ssize_t show_Charging_CallState(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "call state = %d\n", g_call_state);
|
|
return sprintf(buf, "%u\n", g_call_state);
|
|
}
|
|
|
|
static ssize_t store_Charging_CallState(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
int rv;
|
|
|
|
/*rv = sscanf(buf, "%u", &g_call_state); */
|
|
rv = kstrtouint(buf, 0, &g_call_state);
|
|
if (rv != 0)
|
|
return -EINVAL;
|
|
battery_log(BAT_LOG_CRTI, "call state = %d\n", g_call_state);
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(Charging_CallState, 0664, show_Charging_CallState,
|
|
store_Charging_CallState);
|
|
|
|
/* V_0Percent_Tracking */
|
|
static ssize_t show_V_0Percent_Tracking(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "V_0Percent_Tracking = %d\n",
|
|
V_0Percent_Tracking);
|
|
return sprintf(buf, "%u\n", V_0Percent_Tracking);
|
|
}
|
|
|
|
static ssize_t store_V_0Percent_Tracking(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
int rv;
|
|
|
|
/*rv = sscanf(buf, "%u", &V_0Percent_Tracking); */
|
|
rv = kstrtouint(buf, 0, &V_0Percent_Tracking);
|
|
if (rv != 0)
|
|
return -EINVAL;
|
|
battery_log(BAT_LOG_CRTI, "V_0Percent_Tracking = %d\n",
|
|
V_0Percent_Tracking);
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(V_0Percent_Tracking, 0664, show_V_0Percent_Tracking,
|
|
store_V_0Percent_Tracking);
|
|
|
|
static ssize_t show_Charger_Type(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
unsigned int chr_ype = CHARGER_UNKNOWN;
|
|
|
|
chr_ype = BMT_status.charger_exist ? BMT_status.charger_type
|
|
: CHARGER_UNKNOWN;
|
|
|
|
battery_log(BAT_LOG_CRTI, "charger_type = %d\n", chr_ype);
|
|
return sprintf(buf, "%u\n", chr_ype);
|
|
}
|
|
|
|
static ssize_t store_Charger_Type(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[EM] Not Support Write Function\n");
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(Charger_Type, 0664, show_Charger_Type, store_Charger_Type);
|
|
|
|
static ssize_t show_Pump_Express(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
#if defined(PUMP_EXPRESS_SERIES)
|
|
int icount = 20; /* max debouncing time 20 * 0.2 sec */
|
|
#endif
|
|
int is_ta_detected = 0;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] chr_type:%d UISOC:%d startsoc:%d stopsoc:%d\n",
|
|
__func__, BMT_status.charger_type, BMT_status.UI_SOC,
|
|
batt_cust_data.ta_start_battery_soc,
|
|
batt_cust_data.ta_stop_battery_soc);
|
|
|
|
#if defined(PUMP_EXPRESS_SERIES)
|
|
if (BMT_status.charger_type == STANDARD_CHARGER &&
|
|
(mtk_pep20_get_to_check_chr_type() ||
|
|
mtk_pep_get_to_check_chr_type()) &&
|
|
BMT_status.UI_SOC < batt_cust_data.ta_stop_battery_soc) {
|
|
do {
|
|
icount--;
|
|
msleep(200);
|
|
battery_log(BAT_LOG_CRTI, "[%s]icount:%d\n", __func__,
|
|
icount);
|
|
} while (icount && (mtk_pep20_get_to_check_chr_type() ||
|
|
mtk_pep_get_to_check_chr_type()));
|
|
}
|
|
|
|
/* Is PE+20 connect */
|
|
if (mtk_pep20_get_is_connect() && (BMT_status.UI_SOC > 0) &&
|
|
(BMT_status.UI_SOC < 95))
|
|
is_ta_detected = 1;
|
|
battery_log(BAT_LOG_FULL, "%s: pep20_is_connect = %d\n", __func__,
|
|
mtk_pep20_get_is_connect());
|
|
|
|
/* Is PE+ connect */
|
|
if (mtk_pep_get_is_connect() && (BMT_status.UI_SOC > 0) &&
|
|
(BMT_status.UI_SOC < 95))
|
|
is_ta_detected = 1;
|
|
battery_log(BAT_LOG_FULL, "%s: pep_is_connect = %d\n", __func__,
|
|
mtk_pep_get_is_connect());
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
/* Is PE connect */
|
|
if ((ta_check_chr_type == KAL_TRUE) &&
|
|
(BMT_status.charger_type == STANDARD_CHARGER)) {
|
|
battery_log(BAT_LOG_CRTI, "[%s]Wait for PE detection\n",
|
|
__func__);
|
|
do {
|
|
msleep(200);
|
|
} while (ta_check_chr_type);
|
|
}
|
|
if (is_ta_connect == KAL_TRUE)
|
|
is_ta_detected = 1;
|
|
#endif
|
|
|
|
battery_log(BAT_LOG_CRTI, "%s: detected = %d\n", __func__,
|
|
is_ta_detected);
|
|
|
|
return sprintf(buf, "%u\n", is_ta_detected);
|
|
}
|
|
|
|
static ssize_t store_Pump_Express(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static DEVICE_ATTR(Pump_Express, 0664, show_Pump_Express, store_Pump_Express);
|
|
|
|
static ssize_t show_FG_daemon_disable(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[FG] show FG disable : %d\n", gDisableGM);
|
|
return sprintf(buf, "%d\n", gDisableGM);
|
|
}
|
|
|
|
static ssize_t store_FG_daemon_disable(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[disable FG ]\n");
|
|
gDisableGM = KAL_TRUE;
|
|
return size;
|
|
}
|
|
static DEVICE_ATTR(FG_daemon_disable, 0664, show_FG_daemon_disable,
|
|
store_FG_daemon_disable);
|
|
|
|
static void mt_battery_update_EM(struct battery_data *bat_data)
|
|
{
|
|
bat_data->BAT_CAPACITY = BMT_status.UI_SOC;
|
|
bat_data->BAT_TemperatureR = BMT_status.temperatureR; /* API */
|
|
bat_data->BAT_TempBattVoltage = BMT_status.temperatureV; /* API */
|
|
bat_data->BAT_InstatVolt = BMT_status.bat_vol; /* VBAT */
|
|
bat_data->BAT_BatteryAverageCurrent = BMT_status.ICharging;
|
|
bat_data->BAT_BatterySenseVoltage = BMT_status.bat_vol;
|
|
bat_data->BAT_ISenseVoltage = BMT_status.Vsense; /* API */
|
|
bat_data->BAT_ChargerVoltage = BMT_status.charger_vol;
|
|
bat_data->BAT_CURRENT_NOW =
|
|
BMT_status.CURRENT_NOW * 100; /* 0.1mA to uA */
|
|
/* Dual battery */
|
|
bat_data->status_smb = g_status_smb;
|
|
bat_data->capacity_smb = g_capacity_smb;
|
|
bat_data->present_smb = g_present_smb;
|
|
battery_log(BAT_LOG_FULL,
|
|
"status_smb = %d, capacity_smb = %d, present_smb = %d\n",
|
|
bat_data->status_smb, bat_data->capacity_smb,
|
|
bat_data->present_smb);
|
|
if ((BMT_status.UI_SOC == 100) &&
|
|
(BMT_status.charger_exist == KAL_TRUE) &&
|
|
(BMT_status.bat_charging_state != CHR_ERROR))
|
|
bat_data->BAT_STATUS = POWER_SUPPLY_STATUS_FULL;
|
|
|
|
#ifdef CONFIG_MTK_DISABLE_POWER_ON_OFF_VOLTAGE_LIMITATION
|
|
if (bat_data->BAT_CAPACITY <= 0)
|
|
bat_data->BAT_CAPACITY = 1;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"BAT_CAPACITY=1, due to define CONFIG_MTK_DISABLE_POWER_ON_OFF_VOLTAGE_LIMITATION\r\n");
|
|
#endif
|
|
}
|
|
|
|
static enum kal_bool mt_battery_100Percent_tracking_check(void)
|
|
{
|
|
enum kal_bool resetBatteryMeter = KAL_FALSE;
|
|
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
unsigned int cust_sync_time = CUST_SOC_JEITA_SYNC_TIME;
|
|
static unsigned int timer_counter =
|
|
(CUST_SOC_JEITA_SYNC_TIME / BAT_TASK_PERIOD);
|
|
#else
|
|
unsigned int cust_sync_time =
|
|
batt_cust_data.onehundred_percent_tracking_time;
|
|
static unsigned int timer_counter;
|
|
static int timer_counter_init;
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
#else
|
|
/* Init timer_counter for 1st time */
|
|
if (timer_counter_init == 0) {
|
|
timer_counter =
|
|
(batt_cust_data.onehundred_percent_tracking_time /
|
|
BAT_TASK_PERIOD);
|
|
timer_counter_init = 1;
|
|
}
|
|
#endif
|
|
|
|
/* charging full first, UI tracking to 100% */
|
|
if (BMT_status.bat_full == KAL_TRUE) {
|
|
if (BMT_status.UI_SOC >= 100) {
|
|
BMT_status.UI_SOC = 100;
|
|
|
|
if ((g_charging_full_reset_bat_meter == KAL_TRUE) &&
|
|
(BMT_status.bat_charging_state == CHR_BATFULL)) {
|
|
resetBatteryMeter = KAL_TRUE;
|
|
g_charging_full_reset_bat_meter = KAL_FALSE;
|
|
} else {
|
|
resetBatteryMeter = KAL_FALSE;
|
|
}
|
|
} else {
|
|
/* increase UI percentage every xxs */
|
|
if (timer_counter >=
|
|
(cust_sync_time / BAT_TASK_PERIOD)) {
|
|
timer_counter = 1;
|
|
BMT_status.UI_SOC++;
|
|
} else {
|
|
timer_counter++;
|
|
|
|
return resetBatteryMeter;
|
|
}
|
|
|
|
resetBatteryMeter = KAL_TRUE;
|
|
}
|
|
|
|
if (BMT_status.UI_SOC == 100)
|
|
is_uisoc_ever_100 = KAL_TRUE;
|
|
|
|
if ((BMT_status.UI_SOC - BMT_status.SOC) > 10 &&
|
|
is_uisoc_ever_100 == KAL_TRUE) {
|
|
is_uisoc_ever_100 = KAL_FALSE;
|
|
BMT_status.bat_full = KAL_FALSE;
|
|
}
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[100percent], UI_SOC(%d), reset(%d) bat_full(%d) ever100(%d)\n",
|
|
BMT_status.UI_SOC, resetBatteryMeter,
|
|
BMT_status.bat_full, is_uisoc_ever_100);
|
|
} else if (is_uisoc_ever_100 == KAL_TRUE) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[100percent-ever100],UI_SOC=%d SOC=%d\n",
|
|
BMT_status.UI_SOC, BMT_status.UI_SOC);
|
|
} else {
|
|
/* charging is not full, UI keep 99% if reaching 100%, */
|
|
|
|
if (BMT_status.UI_SOC >= 99) {
|
|
BMT_status.UI_SOC = 99;
|
|
resetBatteryMeter = KAL_FALSE;
|
|
battery_log(BAT_LOG_CRTI, "[100percent],UI_SOC = %d\n",
|
|
BMT_status.UI_SOC);
|
|
}
|
|
|
|
timer_counter = (cust_sync_time / BAT_TASK_PERIOD);
|
|
}
|
|
|
|
return resetBatteryMeter;
|
|
}
|
|
|
|
static enum kal_bool mt_battery_nPercent_tracking_check(void)
|
|
{
|
|
enum kal_bool resetBatteryMeter = KAL_FALSE;
|
|
#if defined(SOC_BY_HW_FG)
|
|
static unsigned int timer_counter;
|
|
static int timer_counter_init;
|
|
|
|
if (timer_counter_init == 0) {
|
|
timer_counter_init = 1;
|
|
timer_counter = (batt_cust_data.npercent_tracking_time /
|
|
BAT_TASK_PERIOD);
|
|
}
|
|
|
|
if (BMT_status.nPrecent_UI_SOC_check_point == 0)
|
|
return KAL_FALSE;
|
|
|
|
/* fuel gauge ZCV < 15%, but UI > 15%, 15% can be customized */
|
|
if ((BMT_status.ZCV <= BMT_status.nPercent_ZCV) &&
|
|
(BMT_status.UI_SOC > BMT_status.nPrecent_UI_SOC_check_point)) {
|
|
if (timer_counter ==
|
|
(batt_cust_data.npercent_tracking_time / BAT_TASK_PERIOD)) {
|
|
/* every x sec decrease UI percentage */
|
|
BMT_status.UI_SOC--;
|
|
timer_counter = 1;
|
|
} else {
|
|
timer_counter++;
|
|
return resetBatteryMeter;
|
|
}
|
|
|
|
resetBatteryMeter = KAL_TRUE;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[nPercent] ZCV %d <= nPercent_ZCV %d, UI_SOC=%d., tracking UI_SOC=%d\n",
|
|
BMT_status.ZCV, BMT_status.nPercent_ZCV,
|
|
BMT_status.UI_SOC,
|
|
BMT_status.nPrecent_UI_SOC_check_point);
|
|
} else if ((BMT_status.ZCV > BMT_status.nPercent_ZCV) &&
|
|
(BMT_status.UI_SOC ==
|
|
BMT_status.nPrecent_UI_SOC_check_point)) {
|
|
/* UI less than 15 , but fuel gague is more than 15, hold UI 15%
|
|
*/
|
|
timer_counter = (batt_cust_data.npercent_tracking_time /
|
|
BAT_TASK_PERIOD);
|
|
resetBatteryMeter = KAL_TRUE;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[nPercent] ZCV %d > BMT_status.nPercent_ZCV %d and UI SOC=%d, then keep %d.\n",
|
|
BMT_status.ZCV, BMT_status.nPercent_ZCV,
|
|
BMT_status.UI_SOC,
|
|
BMT_status.nPrecent_UI_SOC_check_point);
|
|
} else {
|
|
timer_counter = (batt_cust_data.npercent_tracking_time /
|
|
BAT_TASK_PERIOD);
|
|
}
|
|
#endif
|
|
return resetBatteryMeter;
|
|
}
|
|
|
|
static enum kal_bool mt_battery_0Percent_tracking_check(void)
|
|
{
|
|
enum kal_bool resetBatteryMeter = KAL_TRUE;
|
|
|
|
if (BMT_status.UI_SOC <= 0) {
|
|
BMT_status.UI_SOC = 0;
|
|
} else {
|
|
if (BMT_status.bat_vol > SYSTEM_OFF_VOLTAGE &&
|
|
BMT_status.UI_SOC > 1)
|
|
BMT_status.UI_SOC--;
|
|
else if (BMT_status.bat_vol <= SYSTEM_OFF_VOLTAGE)
|
|
BMT_status.UI_SOC--;
|
|
}
|
|
|
|
battery_log(BAT_LOG_CRTI, "0Percent, VBAT < %d UI_SOC=%d\r\n",
|
|
SYSTEM_OFF_VOLTAGE, BMT_status.UI_SOC);
|
|
|
|
return resetBatteryMeter;
|
|
}
|
|
|
|
static void mt_battery_Sync_UI_Percentage_to_Real(void)
|
|
{
|
|
static struct timespec lasttime;
|
|
struct timespec now_time, diff;
|
|
|
|
get_monotonic_boottime(&now_time);
|
|
diff = timespec_sub(now_time, lasttime);
|
|
if ((BMT_status.UI_SOC > BMT_status.SOC) &&
|
|
((BMT_status.UI_SOC != 1))) {
|
|
#if !defined(SYNC_UI_SOC_IMM)
|
|
/* reduce after xxs */
|
|
if (chr_wake_up_bat == KAL_FALSE) {
|
|
if (diff.tv_sec >=
|
|
batt_cust_data.sync_to_real_tracking_time) {
|
|
BMT_status.UI_SOC--;
|
|
get_monotonic_boottime(&lasttime);
|
|
}
|
|
#ifdef FG_BAT_INT
|
|
else if (fg_wake_up_bat == KAL_TRUE)
|
|
BMT_status.UI_SOC--;
|
|
|
|
#endif /* #ifdef FG_BAT_INT */
|
|
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[Sync_Real] chr_wake_up_bat=1, don't update UI_SOC\n");
|
|
}
|
|
#else
|
|
BMT_status.UI_SOC--;
|
|
#endif
|
|
battery_log(
|
|
BAT_LOG_CRTI, "[Sync_Real] UI_SOC=%d, SOC=%d diff=%d\n",
|
|
BMT_status.UI_SOC, BMT_status.SOC, (int)diff.tv_sec);
|
|
} else {
|
|
get_monotonic_boottime(&lasttime);
|
|
|
|
BMT_status.UI_SOC = BMT_status.SOC;
|
|
}
|
|
|
|
if (BMT_status.UI_SOC <= 0) {
|
|
BMT_status.UI_SOC = 1;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[Battery]UI_SOC get 0 first (%d)\r\n",
|
|
BMT_status.UI_SOC);
|
|
}
|
|
}
|
|
|
|
static void battery_update(struct battery_data *bat_data)
|
|
{
|
|
struct power_supply *bat_psy = bat_data->psy;
|
|
enum kal_bool resetBatteryMeter = KAL_FALSE;
|
|
static unsigned int update_cnt = 3;
|
|
static unsigned int pre_uisoc;
|
|
static unsigned int pre_chr_state;
|
|
|
|
bat_data->BAT_TECHNOLOGY = POWER_SUPPLY_TECHNOLOGY_LION;
|
|
bat_data->BAT_HEALTH = POWER_SUPPLY_HEALTH_GOOD;
|
|
bat_data->BAT_batt_vol = BMT_status.bat_vol;
|
|
bat_data->BAT_batt_temp = BMT_status.temperature * 10;
|
|
bat_data->BAT_PRESENT = BMT_status.bat_exist;
|
|
|
|
if ((BMT_status.charger_exist == KAL_TRUE) &&
|
|
(BMT_status.bat_charging_state != CHR_ERROR)) {
|
|
if (BMT_status.bat_exist) { /* charging */
|
|
if (BMT_status.bat_vol <=
|
|
batt_cust_data.v_0percent_tracking)
|
|
resetBatteryMeter =
|
|
mt_battery_0Percent_tracking_check();
|
|
else
|
|
resetBatteryMeter =
|
|
mt_battery_100Percent_tracking_check();
|
|
|
|
bat_data->BAT_STATUS = POWER_SUPPLY_STATUS_CHARGING;
|
|
} else { /* No Battery, Only Charger */
|
|
|
|
bat_data->BAT_STATUS = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
BMT_status.UI_SOC = 0;
|
|
}
|
|
|
|
} else { /* Only Battery */
|
|
|
|
bat_data->BAT_STATUS = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
if (BMT_status.bat_vol <= batt_cust_data.v_0percent_tracking)
|
|
resetBatteryMeter =
|
|
mt_battery_0Percent_tracking_check();
|
|
else
|
|
resetBatteryMeter =
|
|
mt_battery_nPercent_tracking_check();
|
|
}
|
|
|
|
if (resetBatteryMeter == KAL_TRUE) {
|
|
battery_meter_reset();
|
|
} else {
|
|
if (BMT_status.bat_full == KAL_TRUE &&
|
|
is_uisoc_ever_100 == KAL_TRUE) {
|
|
BMT_status.UI_SOC = 100;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[recharging] UI_SOC=%d, SOC=%d\n",
|
|
BMT_status.UI_SOC, BMT_status.SOC);
|
|
} else {
|
|
mt_battery_Sync_UI_Percentage_to_Real();
|
|
}
|
|
}
|
|
|
|
battery_log(BAT_LOG_CRTI, "UI_SOC=(%d), resetBatteryMeter=(%d)\n",
|
|
BMT_status.UI_SOC, resetBatteryMeter);
|
|
|
|
/* set RTC SOC to 1 to avoid SOC jump in charger boot. */
|
|
if (BMT_status.UI_SOC <= 1)
|
|
mtk_misc_set_spare_fg_value(1);
|
|
else
|
|
mtk_misc_set_spare_fg_value(BMT_status.UI_SOC);
|
|
|
|
mt_battery_update_EM(bat_data);
|
|
|
|
if (cmd_discharging == 1)
|
|
bat_data->BAT_STATUS = POWER_SUPPLY_STATUS_CMD_DISCHARGING;
|
|
|
|
if (adjust_power != -1) {
|
|
bat_data->adjust_power = adjust_power;
|
|
battery_log(BAT_LOG_CRTI, "adjust_power=(%d)\n", adjust_power);
|
|
}
|
|
#ifdef DLPT_POWER_OFF_EN
|
|
/*extern int dlpt_check_power_off(void); */
|
|
if (bat_data->BAT_CAPACITY <= DLPT_POWER_OFF_THD) {
|
|
static signed char cnt;
|
|
|
|
battery_log(BAT_LOG_CRTI, "[DLPT_POWER_OFF_EN] run\n");
|
|
|
|
if (dlpt_check_power_off() == 1) {
|
|
bat_data->BAT_CAPACITY = 0;
|
|
cnt++;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[DLPT_POWER_OFF_EN] SOC=%d to power off\n",
|
|
bat_data->BAT_CAPACITY);
|
|
if (cnt >= 2)
|
|
kernel_restart("DLPT reboot system");
|
|
|
|
} else
|
|
cnt = 0;
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI, "[DLPT_POWER_OFF_EN] disable(%d)\n",
|
|
bat_data->BAT_CAPACITY);
|
|
}
|
|
#endif
|
|
|
|
if (update_cnt >= 3) {
|
|
/* Update per 60 seconds */
|
|
power_supply_changed(bat_psy);
|
|
pre_uisoc = BMT_status.UI_SOC;
|
|
update_cnt = 0;
|
|
pre_chr_state = BMT_status.bat_charging_state;
|
|
if (cable_in_uevent == 1)
|
|
cable_in_uevent = 0;
|
|
} else if ((pre_uisoc != BMT_status.UI_SOC) ||
|
|
(BMT_status.UI_SOC == 0)) {
|
|
/* Update when soc change */
|
|
power_supply_changed(bat_psy);
|
|
pre_uisoc = BMT_status.UI_SOC;
|
|
update_cnt = 0;
|
|
} else if ((BMT_status.charger_exist == KAL_TRUE) &&
|
|
((pre_chr_state != BMT_status.bat_charging_state) ||
|
|
(BMT_status.bat_charging_state == CHR_ERROR))) {
|
|
/* Update when changer status change */
|
|
power_supply_changed(bat_psy);
|
|
pre_chr_state = BMT_status.bat_charging_state;
|
|
update_cnt = 0;
|
|
} else if (cable_in_uevent == 1) {
|
|
/*To prevent interrupt-trigger update from being filtered */
|
|
power_supply_changed(bat_psy);
|
|
cable_in_uevent = 0;
|
|
} else {
|
|
/* No update */
|
|
update_cnt++;
|
|
}
|
|
}
|
|
|
|
void update_charger_info(int wireless_state)
|
|
{
|
|
#if defined(CONFIG_POWER_VERIFY)
|
|
battery_log(BAT_LOG_CRTI, "[%s] no support\n", __func__);
|
|
#else
|
|
g_wireless_state = wireless_state;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[%s] get wireless_state=%d\n", __func__,
|
|
wireless_state);
|
|
|
|
wake_up_bat();
|
|
#endif
|
|
}
|
|
|
|
static void wireless_update(struct wireless_data *wireless_data)
|
|
{
|
|
static int wireless_status = -1;
|
|
struct power_supply *wireless_psy = wireless_data->psy;
|
|
struct power_supply_desc *wireless_psd = &wireless_data->psd;
|
|
|
|
if (BMT_status.charger_exist == KAL_TRUE || g_wireless_state) {
|
|
if ((BMT_status.charger_type == WIRELESS_CHARGER) ||
|
|
g_wireless_state) {
|
|
wireless_data->WIRELESS_ONLINE = 1;
|
|
wireless_psd->type = POWER_SUPPLY_TYPE_WIRELESS;
|
|
} else {
|
|
wireless_data->WIRELESS_ONLINE = 0;
|
|
}
|
|
} else {
|
|
wireless_data->WIRELESS_ONLINE = 0;
|
|
}
|
|
|
|
if (wireless_status != wireless_data->WIRELESS_ONLINE) {
|
|
wireless_status = wireless_data->WIRELESS_ONLINE;
|
|
power_supply_changed(wireless_psy);
|
|
}
|
|
}
|
|
|
|
static void ac_update(struct ac_data *ac_data)
|
|
{
|
|
static int ac_status = -1;
|
|
struct power_supply *ac_psy = ac_data->psy;
|
|
struct power_supply_desc *ac_psd = &ac_data->psd;
|
|
|
|
if (BMT_status.charger_exist == KAL_TRUE) {
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if ((BMT_status.charger_type == NONSTANDARD_CHARGER) ||
|
|
(BMT_status.charger_type == STANDARD_CHARGER) ||
|
|
(BMT_status.charger_type == APPLE_2_1A_CHARGER) ||
|
|
(BMT_status.charger_type == APPLE_1_0A_CHARGER) ||
|
|
(BMT_status.charger_type == APPLE_0_5A_CHARGER)) {
|
|
#else
|
|
if ((BMT_status.charger_type == NONSTANDARD_CHARGER) ||
|
|
(BMT_status.charger_type == STANDARD_CHARGER) ||
|
|
(BMT_status.charger_type == APPLE_2_1A_CHARGER) ||
|
|
(BMT_status.charger_type == APPLE_1_0A_CHARGER) ||
|
|
(BMT_status.charger_type == APPLE_0_5A_CHARGER) ||
|
|
(DISO_data.diso_state.cur_vdc_state == DISO_ONLINE)) {
|
|
#endif
|
|
ac_data->AC_ONLINE = 1;
|
|
ac_psd->type = POWER_SUPPLY_TYPE_MAINS;
|
|
} else {
|
|
ac_data->AC_ONLINE = 0;
|
|
}
|
|
} else {
|
|
ac_data->AC_ONLINE = 0;
|
|
}
|
|
|
|
if (ac_status != ac_data->AC_ONLINE) {
|
|
ac_status = ac_data->AC_ONLINE;
|
|
power_supply_changed(ac_psy);
|
|
}
|
|
}
|
|
|
|
static void usb_update(struct usb_data *usb_data)
|
|
{
|
|
static int usb_status = -1;
|
|
struct power_supply *usb_psy = usb_data->psy;
|
|
struct power_supply_desc *usb_psd = &usb_data->psd;
|
|
|
|
if (BMT_status.charger_exist == KAL_TRUE) {
|
|
if ((BMT_status.charger_type == STANDARD_HOST) ||
|
|
(BMT_status.charger_type == CHARGING_HOST)) {
|
|
usb_data->USB_ONLINE = 1;
|
|
usb_psd->type = POWER_SUPPLY_TYPE_USB;
|
|
} else {
|
|
usb_data->USB_ONLINE = 0;
|
|
}
|
|
} else {
|
|
usb_data->USB_ONLINE = 0;
|
|
}
|
|
|
|
if (usb_status != usb_data->USB_ONLINE) {
|
|
usb_status = usb_data->USB_ONLINE;
|
|
power_supply_changed(usb_psy);
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Battery Temprature Parameters and functions */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
enum kal_bool pmic_chrdet_status(void)
|
|
{
|
|
if (upmu_is_chr_det() == KAL_TRUE)
|
|
return KAL_TRUE;
|
|
/*else { */
|
|
battery_log(BAT_LOG_CRTI, "[%s] No charger\r\n", __func__);
|
|
return KAL_FALSE;
|
|
/*} */
|
|
}
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Pulse Charging Algorithm */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
enum kal_bool bat_is_charger_exist(void)
|
|
{
|
|
return get_charger_detect_status();
|
|
}
|
|
|
|
enum kal_bool bat_is_charging_full(void)
|
|
{
|
|
if ((BMT_status.bat_full == KAL_TRUE) &&
|
|
(BMT_status.bat_in_recharging_state == KAL_FALSE))
|
|
return KAL_TRUE;
|
|
else
|
|
return KAL_FALSE;
|
|
}
|
|
|
|
unsigned int bat_get_ui_percentage(void)
|
|
{
|
|
/* for plugging out charger in recharge phase, using SOC as UI_SOC */
|
|
|
|
#if defined(CONFIG_POWER_EXT)
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] %s return 100 !!\n\r", __func__);
|
|
return 100;
|
|
#else
|
|
if (chr_wake_up_bat == KAL_TRUE)
|
|
return BMT_status.SOC;
|
|
else
|
|
return BMT_status.UI_SOC;
|
|
#endif
|
|
}
|
|
|
|
/* Full state --> recharge voltage --> full state */
|
|
unsigned int bat_is_recharging_phase(void)
|
|
{
|
|
return BMT_status.bat_in_recharging_state ||
|
|
BMT_status.bat_full == KAL_TRUE;
|
|
}
|
|
|
|
int get_bat_charging_current_level(void)
|
|
{
|
|
enum CHR_CURRENT_ENUM charging_current;
|
|
|
|
battery_charging_control(CHARGING_CMD_GET_CURRENT, &charging_current);
|
|
|
|
return charging_current;
|
|
}
|
|
|
|
unsigned int do_batt_temp_state_machine(void)
|
|
{
|
|
if (BMT_status.temperature == batt_cust_data.err_charge_temperature)
|
|
return PMU_STATUS_FAIL;
|
|
|
|
if (batt_cust_data.bat_low_temp_protect_enable) {
|
|
if (BMT_status.temperature <
|
|
batt_cust_data.min_charge_temperature) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"Battery Under Temperature or NTC fail!\n\r");
|
|
g_batt_temp_status = TEMP_POS_LOW;
|
|
return PMU_STATUS_FAIL;
|
|
} else if (g_batt_temp_status == TEMP_POS_LOW) {
|
|
if (BMT_status.temperature >=
|
|
batt_cust_data
|
|
.min_charge_temperature_plus_x_degree) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"Battery Temp raise from %d to %d(%d), allow charge!\n\r",
|
|
batt_cust_data.min_charge_temperature,
|
|
BMT_status.temperature,
|
|
batt_cust_data.min_charge_temperature_plus_x_degree
|
|
);
|
|
g_batt_temp_status = TEMP_POS_NORMAL;
|
|
BMT_status.bat_charging_state = CHR_PRE;
|
|
return PMU_STATUS_OK;
|
|
} else {
|
|
return PMU_STATUS_FAIL;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (BMT_status.temperature >= batt_cust_data.max_charge_temperature) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Over Temperature !!\n\r");
|
|
g_batt_temp_status = TEMP_POS_HIGH;
|
|
return PMU_STATUS_FAIL;
|
|
} else if (g_batt_temp_status == TEMP_POS_HIGH) {
|
|
if (BMT_status.temperature <
|
|
batt_cust_data.max_charge_temperature_minus_x_degree) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"Battery Temp down from %d to %d(%d), allow charge!\n\r",
|
|
batt_cust_data.max_charge_temperature,
|
|
BMT_status.temperature,
|
|
batt_cust_data
|
|
.max_charge_temperature_minus_x_degree);
|
|
g_batt_temp_status = TEMP_POS_NORMAL;
|
|
BMT_status.bat_charging_state = CHR_PRE;
|
|
return PMU_STATUS_OK;
|
|
} else {
|
|
return PMU_STATUS_FAIL;
|
|
}
|
|
} else {
|
|
g_batt_temp_status = TEMP_POS_NORMAL;
|
|
}
|
|
return PMU_STATUS_OK;
|
|
}
|
|
|
|
unsigned long BAT_Get_Battery_Voltage(int polling_mode)
|
|
{
|
|
unsigned long ret_val = 0;
|
|
|
|
#if defined(CONFIG_POWER_EXT)
|
|
ret_val = 4000;
|
|
#else
|
|
ret_val = battery_meter_get_battery_voltage(KAL_FALSE);
|
|
#endif
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static void mt_battery_average_method_init(enum BATTERY_AVG_ENUM type,
|
|
unsigned int *bufferdata,
|
|
unsigned int data, signed int *sum)
|
|
{
|
|
unsigned int i;
|
|
static enum kal_bool batteryBufferFirst = KAL_TRUE;
|
|
static enum kal_bool previous_charger_exist;
|
|
static enum kal_bool previous_in_recharge_state;
|
|
|
|
static unsigned char index;
|
|
|
|
/* reset charging current window while plug in/out { */
|
|
if (type == BATTERY_AVG_CURRENT) {
|
|
if (BMT_status.charger_exist == KAL_TRUE) {
|
|
if (previous_charger_exist == KAL_FALSE) {
|
|
batteryBufferFirst = KAL_TRUE;
|
|
previous_charger_exist = KAL_TRUE;
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (BMT_status.charger_type ==
|
|
STANDARD_CHARGER) {
|
|
#else
|
|
if ((BMT_status.charger_type ==
|
|
STANDARD_CHARGER) ||
|
|
(DISO_data.diso_state.cur_vdc_state ==
|
|
DISO_ONLINE)) {
|
|
#endif
|
|
data = batt_cust_data
|
|
.ac_charger_current /
|
|
100;
|
|
} else if (BMT_status.charger_type ==
|
|
CHARGING_HOST) {
|
|
data = batt_cust_data
|
|
.charging_host_charger_current /
|
|
100;
|
|
} else if (BMT_status.charger_type ==
|
|
NONSTANDARD_CHARGER)
|
|
data = batt_cust_data
|
|
.non_std_ac_charger_current /
|
|
100; /* mA */
|
|
else /* USB */
|
|
data = batt_cust_data
|
|
.usb_charger_current /
|
|
100; /* mA */
|
|
#ifdef AVG_INIT_WITH_R_SENSE
|
|
data = AVG_INIT_WITH_R_SENSE(data);
|
|
#endif
|
|
} else if ((previous_in_recharge_state == KAL_FALSE) &&
|
|
(BMT_status.bat_in_recharging_state ==
|
|
KAL_TRUE)) {
|
|
batteryBufferFirst = KAL_TRUE;
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (BMT_status.charger_type ==
|
|
STANDARD_CHARGER) {
|
|
#else
|
|
if ((BMT_status.charger_type ==
|
|
STANDARD_CHARGER) ||
|
|
(DISO_data.diso_state.cur_vdc_state ==
|
|
DISO_ONLINE)) {
|
|
#endif
|
|
data = batt_cust_data
|
|
.ac_charger_current /
|
|
100;
|
|
} else if (BMT_status.charger_type ==
|
|
CHARGING_HOST) {
|
|
data = batt_cust_data
|
|
.charging_host_charger_current /
|
|
100;
|
|
} else if (BMT_status.charger_type ==
|
|
NONSTANDARD_CHARGER)
|
|
data = batt_cust_data
|
|
.non_std_ac_charger_current /
|
|
100; /* mA */
|
|
else /* USB */
|
|
data = batt_cust_data
|
|
.usb_charger_current /
|
|
100; /* mA */
|
|
#ifdef AVG_INIT_WITH_R_SENSE
|
|
data = AVG_INIT_WITH_R_SENSE(data);
|
|
#endif
|
|
}
|
|
|
|
previous_in_recharge_state =
|
|
BMT_status.bat_in_recharging_state;
|
|
} else {
|
|
if (previous_charger_exist == KAL_TRUE) {
|
|
batteryBufferFirst = KAL_TRUE;
|
|
previous_charger_exist = KAL_FALSE;
|
|
data = 0;
|
|
}
|
|
}
|
|
}
|
|
/* reset charging current window while plug in/out } */
|
|
|
|
battery_log(BAT_LOG_FULL, "batteryBufferFirst =%d, data= (%d)\n",
|
|
batteryBufferFirst, data);
|
|
|
|
if (batteryBufferFirst == KAL_TRUE) {
|
|
for (i = 0; i < BATTERY_AVERAGE_SIZE; i++)
|
|
bufferdata[i] = data;
|
|
|
|
*sum = data * BATTERY_AVERAGE_SIZE;
|
|
}
|
|
|
|
index++;
|
|
if (index >= BATTERY_AVERAGE_DATA_NUMBER) {
|
|
index = BATTERY_AVERAGE_DATA_NUMBER;
|
|
batteryBufferFirst = KAL_FALSE;
|
|
}
|
|
}
|
|
|
|
static unsigned int mt_battery_average_method(enum BATTERY_AVG_ENUM type,
|
|
unsigned int *bufferdata,
|
|
unsigned int data,
|
|
signed int *sum,
|
|
unsigned char batteryIndex)
|
|
{
|
|
unsigned int avgdata;
|
|
|
|
mt_battery_average_method_init(type, bufferdata, data, sum);
|
|
|
|
*sum -= bufferdata[batteryIndex];
|
|
*sum += data;
|
|
bufferdata[batteryIndex] = data;
|
|
avgdata = (*sum) / BATTERY_AVERAGE_SIZE;
|
|
|
|
battery_log(BAT_LOG_FULL, "bufferdata[%d]= (%d)\n", batteryIndex,
|
|
bufferdata[batteryIndex]);
|
|
return avgdata;
|
|
}
|
|
|
|
void mt_battery_GetBatteryData(void)
|
|
{
|
|
unsigned int bat_vol, charger_vol, Vsense, ZCV;
|
|
signed int ICharging, temperature, temperatureR, temperatureV, SOC;
|
|
static signed int bat_sum, icharging_sum, temperature_sum;
|
|
static signed int batteryVoltageBuffer[BATTERY_AVERAGE_SIZE];
|
|
static signed int batteryCurrentBuffer[BATTERY_AVERAGE_SIZE];
|
|
static signed int batteryTempBuffer[BATTERY_AVERAGE_SIZE];
|
|
static unsigned char batteryIndex;
|
|
static signed int previous_SOC = -1;
|
|
enum kal_bool current_sign;
|
|
|
|
bat_vol = battery_meter_get_battery_voltage(KAL_TRUE);
|
|
Vsense = battery_meter_get_VSense();
|
|
if (upmu_is_chr_det() == KAL_TRUE)
|
|
ICharging = battery_meter_get_charging_current();
|
|
else
|
|
ICharging = 0;
|
|
|
|
charger_vol = battery_meter_get_charger_voltage();
|
|
temperature = battery_meter_get_battery_temperature();
|
|
temperatureV = battery_meter_get_tempV();
|
|
temperatureR = battery_meter_get_tempR(temperatureV);
|
|
|
|
if (bat_meter_timeout == KAL_TRUE || bat_spm_timeout == TRUE ||
|
|
fg_wake_up_bat == KAL_TRUE) {
|
|
SOC = battery_meter_get_battery_percentage();
|
|
/*if (bat_spm_timeout == KAL_TRUE) */
|
|
/*BMT_status.UI_SOC = battery_meter_get_battery_percentage();*/
|
|
|
|
bat_meter_timeout = KAL_FALSE;
|
|
bat_spm_timeout = FALSE;
|
|
} else {
|
|
if (previous_SOC == -1)
|
|
SOC = battery_meter_get_battery_percentage();
|
|
else
|
|
SOC = previous_SOC;
|
|
}
|
|
|
|
ZCV = battery_meter_get_battery_zcv();
|
|
|
|
BMT_status.ICharging = mt_battery_average_method(
|
|
BATTERY_AVG_CURRENT, &batteryCurrentBuffer[0], ICharging,
|
|
&icharging_sum, batteryIndex);
|
|
|
|
if (previous_SOC == -1 &&
|
|
bat_vol <= batt_cust_data.v_0percent_tracking) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"battery voltage too low, use ZCV to init average data.\n");
|
|
BMT_status.bat_vol = mt_battery_average_method(
|
|
BATTERY_AVG_VOLT, &batteryVoltageBuffer[0], ZCV,
|
|
&bat_sum, batteryIndex);
|
|
} else {
|
|
BMT_status.bat_vol = mt_battery_average_method(
|
|
BATTERY_AVG_VOLT, &batteryVoltageBuffer[0], bat_vol,
|
|
&bat_sum, batteryIndex);
|
|
}
|
|
|
|
if (battery_cmd_thermal_test_mode == 1) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"test mode , battery temperature is fixed.\n");
|
|
} else {
|
|
BMT_status.temperature = mt_battery_average_method(
|
|
BATTERY_AVG_TEMP, &batteryTempBuffer[0], temperature,
|
|
&temperature_sum, batteryIndex);
|
|
}
|
|
|
|
BMT_status.Vsense = Vsense;
|
|
BMT_status.charger_vol = charger_vol;
|
|
BMT_status.temperatureV = temperatureV;
|
|
BMT_status.temperatureR = temperatureR;
|
|
BMT_status.SOC = SOC;
|
|
BMT_status.ZCV = ZCV;
|
|
BMT_status.IBattery = battery_meter_get_battery_current();
|
|
BMT_status.CURRENT_NOW = BMT_status.IBattery;
|
|
current_sign = battery_meter_get_battery_current_sign();
|
|
BMT_status.IBattery *= (current_sign ? 1 : (-1));
|
|
|
|
if (BMT_status.charger_exist == KAL_FALSE) {
|
|
if (BMT_status.SOC > previous_SOC && previous_SOC >= 0)
|
|
BMT_status.SOC = previous_SOC;
|
|
}
|
|
|
|
previous_SOC = BMT_status.SOC;
|
|
|
|
batteryIndex++;
|
|
if (batteryIndex >= BATTERY_AVERAGE_SIZE)
|
|
batteryIndex = 0;
|
|
|
|
if (g_battery_soc_ready == KAL_FALSE)
|
|
g_battery_soc_ready = KAL_TRUE;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"AvgVbat=(%d,%d),AvgI=(%d,%d),VChr=%d,AvgT=(%d,%d),SOC=(%d,%d),UI_SOC=%d,ZCV=%d,CHR_Type=%d bcct:%d:%d I:%d Ibat:%d fg:%d\n",
|
|
BMT_status.bat_vol, bat_vol, BMT_status.ICharging, ICharging,
|
|
BMT_status.charger_vol, BMT_status.temperature, temperature,
|
|
previous_SOC, BMT_status.SOC, BMT_status.UI_SOC, BMT_status.ZCV,
|
|
BMT_status.charger_type, g_bcct_flag,
|
|
get_usb_current_unlimited(), get_bat_charging_current_level(),
|
|
BMT_status.IBattery / 10, gDisableGM);
|
|
}
|
|
|
|
static unsigned int mt_battery_CheckBatteryTemp(void)
|
|
{
|
|
unsigned int status = PMU_STATUS_OK;
|
|
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
|
|
battery_log(BAT_LOG_CRTI, "[BATTERY] support JEITA, temperature=%d\n",
|
|
BMT_status.temperature);
|
|
|
|
if (do_jeita_state_machine() == PMU_STATUS_FAIL) {
|
|
battery_log(BAT_LOG_CRTI, "[BATTERY] JEITA : fail\n");
|
|
status = PMU_STATUS_FAIL;
|
|
}
|
|
#else
|
|
|
|
if (batt_cust_data.mtk_temperature_recharge_support) {
|
|
if (do_batt_temp_state_machine() == PMU_STATUS_FAIL) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Batt temp check : fail\n");
|
|
status = PMU_STATUS_FAIL;
|
|
}
|
|
} else {
|
|
#ifdef BAT_LOW_TEMP_PROTECT_ENABLE
|
|
if ((BMT_status.temperature < MIN_CHARGE_TEMPERATURE) ||
|
|
(BMT_status.temperature == ERR_CHARGE_TEMPERATURE)) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Under Temperature or NTC fail\n\r");
|
|
status = PMU_STATUS_FAIL;
|
|
}
|
|
#endif
|
|
if (BMT_status.temperature >= MAX_CHARGE_TEMPERATURE) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery Over Temperature !!\n\r");
|
|
status = PMU_STATUS_FAIL;
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
return status;
|
|
}
|
|
|
|
static unsigned int mt_battery_CheckChargerVoltage(void)
|
|
{
|
|
unsigned int status = PMU_STATUS_OK;
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
unsigned int v_charger_max = DISO_data.hv_voltage;
|
|
#endif
|
|
|
|
if (BMT_status.charger_exist == KAL_TRUE) {
|
|
|
|
if (batt_cust_data.v_charger_enable) {
|
|
if (BMT_status.charger_vol <=
|
|
batt_cust_data.v_charger_min) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY]Charger under voltage!!\r\n");
|
|
BMT_status.bat_charging_state = CHR_ERROR;
|
|
status = PMU_STATUS_FAIL;
|
|
}
|
|
}
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (BMT_status.charger_vol >= batt_cust_data.v_charger_max) {
|
|
#else
|
|
if (BMT_status.charger_vol >= v_charger_max) {
|
|
#endif
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY]Charger over voltage !!\r\n");
|
|
BMT_status.charger_protect_status = charger_OVER_VOL;
|
|
BMT_status.bat_charging_state = CHR_ERROR;
|
|
status = PMU_STATUS_FAIL;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static unsigned int mt_battery_CheckChargingTime(void)
|
|
{
|
|
unsigned int status = PMU_STATUS_OK;
|
|
|
|
if ((g_battery_thermal_throttling_flag == 2) ||
|
|
(g_battery_thermal_throttling_flag == 3)) {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[TestMode] Disable Safety Timer. bat_tt_enable=%d, bat_thr_test_mode=%d, bat_thr_test_value=%d\n",
|
|
g_battery_thermal_throttling_flag,
|
|
battery_cmd_thermal_test_mode,
|
|
battery_cmd_thermal_test_mode_value);
|
|
|
|
} else {
|
|
/* Charging OT */
|
|
if (BMT_status.total_charging_time >= MAX_CHARGING_TIME) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Charging Over Time.\n");
|
|
|
|
status = PMU_STATUS_FAIL;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
#if defined(STOP_CHARGING_IN_TAKLING)
|
|
static unsigned int mt_battery_CheckCallState(void)
|
|
{
|
|
unsigned int status = PMU_STATUS_OK;
|
|
|
|
if ((g_call_state == CALL_ACTIVE) &&
|
|
(BMT_status.bat_vol > batt_cust_data.v_cc2topoff_thres))
|
|
status = PMU_STATUS_FAIL;
|
|
|
|
return status;
|
|
}
|
|
#endif
|
|
|
|
static void mt_battery_CheckBatteryStatus(void)
|
|
{
|
|
battery_log(BAT_LOG_FULL,
|
|
"[%s] cmd_discharging=(%d)\n", __func__,
|
|
cmd_discharging);
|
|
if (cmd_discharging == 1) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s]cmd_discharging=(%d)\n", __func__,
|
|
cmd_discharging);
|
|
BMT_status.bat_charging_state = CHR_ERROR;
|
|
battery_charging_control(CHARGING_CMD_SET_ERROR_STATE,
|
|
&cmd_discharging);
|
|
return;
|
|
} else if (cmd_discharging == 0) {
|
|
BMT_status.bat_charging_state = CHR_PRE;
|
|
battery_charging_control(CHARGING_CMD_SET_ERROR_STATE,
|
|
&cmd_discharging);
|
|
cmd_discharging = -1;
|
|
}
|
|
if (mt_battery_CheckBatteryTemp() != PMU_STATUS_OK) {
|
|
BMT_status.bat_charging_state = CHR_ERROR;
|
|
return;
|
|
}
|
|
|
|
if (mt_battery_CheckChargerVoltage() != PMU_STATUS_OK) {
|
|
BMT_status.bat_charging_state = CHR_ERROR;
|
|
return;
|
|
}
|
|
#if defined(STOP_CHARGING_IN_TAKLING)
|
|
if (mt_battery_CheckCallState() != PMU_STATUS_OK) {
|
|
BMT_status.bat_charging_state = CHR_HOLD;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
if (mt_battery_CheckChargingTime() != PMU_STATUS_OK) {
|
|
BMT_status.bat_charging_state = CHR_ERROR;
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void mt_battery_notify_TotalChargingTime_check(void)
|
|
{
|
|
#if defined(BATTERY_NOTIFY_CASE_0005_TOTAL_CHARGINGTIME)
|
|
if ((g_battery_thermal_throttling_flag == 2) ||
|
|
(g_battery_thermal_throttling_flag == 3)) {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[TestMode] Disable Safety Timer : no UI display\n");
|
|
} else {
|
|
if (BMT_status.total_charging_time >= MAX_CHARGING_TIME)
|
|
/* if(BMT_status.total_charging_time >= 60) //test */
|
|
{
|
|
g_BatteryNotifyCode |= 0x0010;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Charging Over Time\n");
|
|
} else {
|
|
g_BatteryNotifyCode &= ~(0x0010);
|
|
}
|
|
}
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] BATTERY_NOTIFY_CASE_0005_TOTAL_CHARGINGTIME (%x)\n",
|
|
g_BatteryNotifyCode);
|
|
#endif
|
|
}
|
|
|
|
static void mt_battery_notify_VBat_check(void)
|
|
{
|
|
#if defined(BATTERY_NOTIFY_CASE_0004_VBAT)
|
|
if (BMT_status.bat_vol > 4350)
|
|
/* if(BMT_status.bat_vol > 3800) //test */
|
|
{
|
|
g_BatteryNotifyCode |= 0x0008;
|
|
battery_log(BAT_LOG_CRTI, "[BATTERY] bat_vlot(%ld) > 4350mV\n",
|
|
BMT_status.bat_vol);
|
|
} else {
|
|
g_BatteryNotifyCode &= ~(0x0008);
|
|
}
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] BATTERY_NOTIFY_CASE_0004_VBAT (%x)\n",
|
|
g_BatteryNotifyCode);
|
|
|
|
#endif
|
|
}
|
|
|
|
static void mt_battery_notify_ICharging_check(void)
|
|
{
|
|
#if defined(BATTERY_NOTIFY_CASE_0003_ICHARGING)
|
|
if ((BMT_status.ICharging > 1000) &&
|
|
(BMT_status.total_charging_time > 300)) {
|
|
g_BatteryNotifyCode |= 0x0004;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] I_charging(%ld) > 1000mA\n",
|
|
BMT_status.ICharging);
|
|
} else {
|
|
g_BatteryNotifyCode &= ~(0x0004);
|
|
}
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] BATTERY_NOTIFY_CASE_0003_ICHARGING (%x)\n",
|
|
g_BatteryNotifyCode);
|
|
|
|
#endif
|
|
}
|
|
|
|
static void mt_battery_notify_VBatTemp_check(void)
|
|
{
|
|
#if defined(BATTERY_NOTIFY_CASE_0002_VBATTEMP)
|
|
|
|
if (BMT_status.temperature >= batt_cust_data.max_charge_temperature) {
|
|
g_BatteryNotifyCode |= 0x0002;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] bat_temp(%d) out of range(too high)\n",
|
|
BMT_status.temperature);
|
|
}
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
else if (BMT_status.temperature < TEMP_NEG_10_THRESHOLD) {
|
|
g_BatteryNotifyCode |= 0x0020;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] bat_temp(%d) out of range(too low)\n",
|
|
BMT_status.temperature);
|
|
}
|
|
#else
|
|
#ifdef BAT_LOW_TEMP_PROTECT_ENABLE
|
|
else if (BMT_status.temperature < MIN_CHARGE_TEMPERATURE) {
|
|
g_BatteryNotifyCode |= 0x0020;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] bat_temp(%d) out of range(too low)\n",
|
|
BMT_status.temperature);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
battery_log(BAT_LOG_FULL,
|
|
"[BATTERY] BATTERY_NOTIFY_CASE_0002_VBATTEMP (%x)\n",
|
|
g_BatteryNotifyCode);
|
|
|
|
#endif
|
|
}
|
|
|
|
static void mt_battery_notify_VCharger_check(void)
|
|
{
|
|
#if defined(BATTERY_NOTIFY_CASE_0001_VCHARGER)
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
unsigned int v_charger_max = DISO_data.hv_voltage;
|
|
#endif
|
|
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (BMT_status.charger_vol > batt_cust_data.v_charger_max) {
|
|
#else
|
|
if (BMT_status.charger_vol > v_charger_max) {
|
|
#endif
|
|
g_BatteryNotifyCode |= 0x0001;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] BMT_status.charger_vol(%d) > %d mV\n",
|
|
BMT_status.charger_vol,
|
|
batt_cust_data.v_charger_max);
|
|
} else {
|
|
g_BatteryNotifyCode &= ~(0x0001);
|
|
}
|
|
if (g_BatteryNotifyCode != 0x0000)
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] BATTERY_NOTIFY_CASE_0001_VCHARGER (%x)\n",
|
|
g_BatteryNotifyCode);
|
|
#endif
|
|
}
|
|
|
|
static void mt_battery_notify_UI_test(void)
|
|
{
|
|
if (g_BN_TestMode == 0x0001) {
|
|
g_BatteryNotifyCode = 0x0001;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY_TestMode] BATTERY_NOTIFY_CASE_0001_VCHARGER\n");
|
|
} else if (g_BN_TestMode == 0x0002) {
|
|
g_BatteryNotifyCode = 0x0002;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY_TestMode] BATTERY_NOTIFY_CASE_0002_VBATTEMP\n");
|
|
} else if (g_BN_TestMode == 0x0003) {
|
|
g_BatteryNotifyCode = 0x0004;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY_TestMode] BATTERY_NOTIFY_CASE_0003_ICHARGING\n");
|
|
} else if (g_BN_TestMode == 0x0004) {
|
|
g_BatteryNotifyCode = 0x0008;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY_TestMode] BATTERY_NOTIFY_CASE_0004_VBAT\n");
|
|
} else if (g_BN_TestMode == 0x0005) {
|
|
g_BatteryNotifyCode = 0x0010;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY_TestMode] BATTERY_NOTIFY_CASE_0005_TOTAL_CHARGINGTIME\n");
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] Unknown BN_TestMode Code : %x\n",
|
|
g_BN_TestMode);
|
|
}
|
|
}
|
|
|
|
void mt_battery_notify_check(void)
|
|
{
|
|
g_BatteryNotifyCode = 0x0000;
|
|
|
|
if (g_BN_TestMode == 0x0000) { /* for normal case */
|
|
battery_log(BAT_LOG_FULL,
|
|
"[BATTERY] %s\n", __func__);
|
|
|
|
mt_battery_notify_VCharger_check();
|
|
|
|
mt_battery_notify_VBatTemp_check();
|
|
|
|
mt_battery_notify_ICharging_check();
|
|
|
|
mt_battery_notify_VBat_check();
|
|
|
|
mt_battery_notify_TotalChargingTime_check();
|
|
} else { /* for UI test */
|
|
|
|
mt_battery_notify_UI_test();
|
|
}
|
|
}
|
|
|
|
static void mt_battery_thermal_check(void)
|
|
{
|
|
if ((g_battery_thermal_throttling_flag == 1) ||
|
|
(g_battery_thermal_throttling_flag == 3)) {
|
|
if (battery_cmd_thermal_test_mode == 1) {
|
|
BMT_status.temperature =
|
|
battery_cmd_thermal_test_mode_value;
|
|
battery_log(BAT_LOG_FULL,
|
|
"[Battery] In thermal_test_mode, Tbat=%d\n",
|
|
BMT_status.temperature);
|
|
}
|
|
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
|
|
/* ignore default rule */
|
|
#else
|
|
if (BMT_status.temperature >= 60) {
|
|
#if defined(CONFIG_POWER_EXT)
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] CONFIG_POWER_EXT, no update battery update power down.\n");
|
|
#else
|
|
{
|
|
if ((g_platform_boot_mode == META_BOOT) ||
|
|
(g_platform_boot_mode == ADVMETA_BOOT) ||
|
|
(g_platform_boot_mode ==
|
|
ATE_FACTORY_BOOT)) {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[BATTERY] boot mode = %d, bypass temperature check\n",
|
|
g_platform_boot_mode);
|
|
} else {
|
|
struct battery_data *bat_data =
|
|
&battery_main;
|
|
struct power_supply *bat_psy =
|
|
bat_data->psy;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[Battery] Tbat(%d)>=60, system need power down.\n",
|
|
BMT_status.temperature);
|
|
|
|
bat_data->BAT_CAPACITY = 0;
|
|
|
|
power_supply_changed(bat_psy);
|
|
|
|
if (BMT_status.charger_exist ==
|
|
KAL_TRUE) {
|
|
/* can not power down due to */
|
|
/* charger exist, */
|
|
/* so need reset system */
|
|
battery_charging_control(
|
|
CHARGING_CMD_SET_PLATFORM_RESET,
|
|
NULL);
|
|
}
|
|
/* avoid SW no feedback */
|
|
battery_charging_control(
|
|
CHARGING_CMD_SET_POWER_OFF,
|
|
NULL);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static void mt_battery_update_status(void)
|
|
{
|
|
#if defined(CONFIG_POWER_EXT)
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BATTERY] CONFIG_POWER_EXT, no update Android.\n");
|
|
#else
|
|
{
|
|
if (skip_battery_update == KAL_FALSE) {
|
|
battery_log(BAT_LOG_FULL, "%s\n", __func__);
|
|
usb_update(&usb_main);
|
|
ac_update(&ac_main);
|
|
wireless_update(&wireless_main);
|
|
battery_update(&battery_main);
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"skip %s.\n", __func__);
|
|
skip_battery_update = KAL_FALSE;
|
|
}
|
|
}
|
|
|
|
#endif
|
|
}
|
|
|
|
enum charger_type mt_charger_type_detection(void)
|
|
{
|
|
enum charger_type CHR_Type_num = CHARGER_UNKNOWN;
|
|
|
|
mutex_lock(&charger_type_mutex);
|
|
|
|
#if defined(CONFIG_MTK_WIRELESS_CHARGER_SUPPORT)
|
|
#if defined(CONFIG_USB_MTK_CHARGER_DETECT)
|
|
if (mt_get_usb11_port_status() == true) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"========use_usb_detect===========\n");
|
|
CHR_Type_num = usb_charger_type_detect();
|
|
BMT_status.charger_type = CHR_Type_num;
|
|
} else
|
|
#endif
|
|
{
|
|
battery_charging_control(CHARGING_CMD_GET_CHARGER_TYPE,
|
|
&CHR_Type_num);
|
|
BMT_status.charger_type = CHR_Type_num;
|
|
}
|
|
#else
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (BMT_status.charger_type == CHARGER_UNKNOWN) {
|
|
#else
|
|
if ((BMT_status.charger_type == CHARGER_UNKNOWN) &&
|
|
(DISO_data.diso_state.cur_vusb_state == DISO_ONLINE)) {
|
|
#endif
|
|
#if defined(CONFIG_USB_MTK_CHARGER_DETECT)
|
|
if (mt_get_usb11_port_status() == true) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"========use_usb_detect===========\n");
|
|
CHR_Type_num = usb_charger_type_detect();
|
|
BMT_status.charger_type = CHR_Type_num;
|
|
} else
|
|
#endif
|
|
{
|
|
battery_charging_control(CHARGING_CMD_GET_CHARGER_TYPE,
|
|
&CHR_Type_num);
|
|
BMT_status.charger_type = CHR_Type_num;
|
|
}
|
|
#if defined(CONFIG_MTK_KERNEL_POWER_OFF_CHARGING)
|
|
#if defined(PUMP_EXPRESS_SERIES)
|
|
if (BMT_status.UI_SOC == 100) {
|
|
BMT_status.bat_charging_state = CHR_BATFULL;
|
|
BMT_status.bat_full = KAL_TRUE;
|
|
g_charging_full_reset_bat_meter = KAL_TRUE;
|
|
}
|
|
|
|
if (g_battery_soc_ready == KAL_FALSE) {
|
|
if (BMT_status.nPercent_ZCV == 0)
|
|
battery_meter_initial();
|
|
|
|
BMT_status.SOC = battery_meter_get_battery_percentage();
|
|
}
|
|
|
|
if (BMT_status.bat_vol > 0)
|
|
mt_battery_update_status();
|
|
|
|
#endif
|
|
#endif
|
|
}
|
|
#endif
|
|
mutex_unlock(&charger_type_mutex);
|
|
|
|
return BMT_status.charger_type;
|
|
}
|
|
|
|
enum charger_type mt_get_charger_type(void)
|
|
{
|
|
#if defined(CONFIG_POWER_EXT) || defined(CONFIG_MTK_FPGA)
|
|
return STANDARD_HOST;
|
|
#else
|
|
return BMT_status.charger_type;
|
|
#endif
|
|
}
|
|
|
|
static void mt_battery_charger_detect_check(void)
|
|
{
|
|
#ifdef CONFIG_MTK_BQ25896_SUPPORT
|
|
/*New low power feature of MT6531: disable charger CLK without CHARIN.
|
|
* MT6351 API abstracted in charging_hw_bw25896.c.
|
|
* Any charger with MT6351 needs to set this.
|
|
* Compile option is not limited to CONFIG_MTK_BQ25896_SUPPORT.
|
|
* PowerDown = 0
|
|
*/
|
|
unsigned int pwr;
|
|
#endif
|
|
if (upmu_is_chr_det() == KAL_TRUE) {
|
|
__pm_stay_awake(battery_suspend_lock);
|
|
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
BMT_status.charger_exist = KAL_TRUE;
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTK_WIRELESS_CHARGER_SUPPORT)
|
|
mt_charger_type_detection();
|
|
|
|
if ((BMT_status.charger_type == STANDARD_HOST) ||
|
|
(BMT_status.charger_type == CHARGING_HOST)) {
|
|
mt_usb_connect_v1();
|
|
}
|
|
#else
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (BMT_status.charger_type == CHARGER_UNKNOWN) {
|
|
#else
|
|
if ((BMT_status.charger_type == CHARGER_UNKNOWN) &&
|
|
(DISO_data.diso_state.cur_vusb_state == DISO_ONLINE)) {
|
|
#endif
|
|
mt_charger_type_detection();
|
|
|
|
if ((BMT_status.charger_type == STANDARD_HOST) ||
|
|
(BMT_status.charger_type == CHARGING_HOST)){
|
|
mt_usb_connect_v1();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MTK_BQ25896_SUPPORT
|
|
/*New low power feature of MT6531: disable charger CLK without
|
|
* CHARIN.
|
|
* MT6351 API abstracted in charging_hw_bw25896.c.
|
|
* Any charger with MT6351 needs to set this.
|
|
* Compile option is not limited to CONFIG_MTK_BQ25896_SUPPORT.
|
|
* PowerDown = 0
|
|
*/
|
|
pwr = 0;
|
|
battery_charging_control(CHARGING_CMD_SET_CHRIND_CK_PDN, &pwr);
|
|
#endif
|
|
|
|
battery_log(BAT_LOG_FULL,
|
|
"[BAT_thread]Cable in, CHR_Type_num=%d\r\n",
|
|
BMT_status.charger_type);
|
|
|
|
} else {
|
|
__pm_relax(battery_suspend_lock);
|
|
|
|
BMT_status.charger_exist = KAL_FALSE;
|
|
BMT_status.charger_type = CHARGER_UNKNOWN;
|
|
BMT_status.bat_full = KAL_FALSE;
|
|
BMT_status.bat_in_recharging_state = KAL_FALSE;
|
|
BMT_status.bat_charging_state = CHR_PRE;
|
|
BMT_status.total_charging_time = 0;
|
|
BMT_status.PRE_charging_time = 0;
|
|
BMT_status.CC_charging_time = 0;
|
|
BMT_status.TOPOFF_charging_time = 0;
|
|
BMT_status.POSTFULL_charging_time = 0;
|
|
|
|
battery_log(BAT_LOG_CRTI, "[BAT_thread]Cable out \r\n");
|
|
mt_usb_disconnect_v1();
|
|
|
|
#ifdef CONFIG_MTK_BQ25896_SUPPORT
|
|
/*New low power feature of MT6531: disable charger CLK without
|
|
* CHARIN.
|
|
* MT6351 API abstracted in charging_hw_bw25896.c.
|
|
* Any charger with MT6351 needs to set this.
|
|
* Compile option is not limited to CONFIG_MTK_BQ25896_SUPPORT.
|
|
* PowerDown = 1
|
|
*/
|
|
pwr = 1;
|
|
battery_charging_control(CHARGING_CMD_SET_CHRIND_CK_PDN, &pwr);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static void mt_kpoc_power_off_check(void)
|
|
{
|
|
#ifdef CONFIG_MTK_KERNEL_POWER_OFF_CHARGING
|
|
battery_log(BAT_LOG_FULL,
|
|
"[%s] , chr_vol=%d, boot_mode=%d\r\n", __func__,
|
|
BMT_status.charger_vol, g_platform_boot_mode);
|
|
if (g_platform_boot_mode == KERNEL_POWER_OFF_CHARGING_BOOT ||
|
|
g_platform_boot_mode == LOW_POWER_OFF_CHARGING_BOOT) {
|
|
if ((upmu_is_chr_det() == KAL_FALSE) &&
|
|
(BMT_status.charger_vol < 2500)) { /*vbus<2.5V*/
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[bat_thread_kthread] Unplug Charger/USB In Kernel Power Off Charging Mode! Shutdown OS!\r\n");
|
|
battery_charging_control(CHARGING_CMD_SET_POWER_OFF,
|
|
NULL);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void update_battery_2nd_info(int status_smb, int capacity_smb, int present_smb)
|
|
{
|
|
#if defined(CONFIG_POWER_VERIFY)
|
|
battery_log(BAT_LOG_CRTI, "[update_battery_smb_info] no support\n");
|
|
#else
|
|
g_status_smb = status_smb;
|
|
g_capacity_smb = capacity_smb;
|
|
g_present_smb = present_smb;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[update_battery_smb_info] get status_smb=%d,capacity_smb=%d,present_smb=%d\n",
|
|
status_smb, capacity_smb, present_smb);
|
|
|
|
wake_up_bat();
|
|
g_smartbook_update = 1;
|
|
#endif
|
|
}
|
|
|
|
void do_chrdet_int_task(void)
|
|
{
|
|
if (g_bat_init_flag == KAL_TRUE) {
|
|
#if !defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (upmu_is_chr_det() == KAL_TRUE) {
|
|
#else
|
|
battery_charging_control(CHARGING_CMD_GET_DISO_STATE,
|
|
&DISO_data);
|
|
if ((DISO_data.diso_state.cur_vusb_state == DISO_ONLINE) ||
|
|
(DISO_data.diso_state.cur_vdc_state == DISO_ONLINE)) {
|
|
#endif
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[%s] charger exist!\n", __func__);
|
|
BMT_status.charger_exist = KAL_TRUE;
|
|
|
|
__pm_stay_awake(battery_suspend_lock);
|
|
#if defined(CONFIG_POWER_EXT)
|
|
mt_usb_connect_v1();
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] call mt_usb_connect_v1() in EVB\n",
|
|
__func__);
|
|
#if defined(CONFIG_MTK_POWER_EXT_DETECT)
|
|
if (bat_is_ext_power() == KAL_TRUE) {
|
|
mt_usb_connect_v1();
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] call mt_usb_connect_v1() in EVB\n",
|
|
__func__);
|
|
#endif
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] charger NOT exist!\n", __func__);
|
|
BMT_status.charger_exist = KAL_FALSE;
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"turn off charging for no available charging source\n");
|
|
battery_charging_control(CHARGING_CMD_ENABLE,
|
|
&BMT_status.charger_exist);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MTK_KERNEL_POWER_OFF_CHARGING
|
|
if (g_platform_boot_mode ==
|
|
KERNEL_POWER_OFF_CHARGING_BOOT ||
|
|
g_platform_boot_mode ==
|
|
LOW_POWER_OFF_CHARGING_BOOT) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[pmic_thread_kthread] Unplug Charger/USB In Kernel Power Off Charging Mode! Shutdown OS!\r\n");
|
|
battery_charging_control(
|
|
CHARGING_CMD_SET_POWER_OFF, NULL);
|
|
}
|
|
#endif
|
|
|
|
__pm_relax(battery_suspend_lock);
|
|
|
|
#if defined(CONFIG_POWER_EXT)
|
|
mt_usb_disconnect_v1();
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] call mt_usb_disconnect_v1() in EVB\n",
|
|
__func__);
|
|
#elif defined(CONFIG_MTK_POWER_EXT_DETECT)
|
|
if (bat_is_ext_power() == KAL_TRUE) {
|
|
mt_usb_disconnect_v1();
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] call mt_usb_disconnect_v1() in EVB\n",
|
|
__func__);
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
mtk_pep20_set_is_cable_out_occur(true);
|
|
mtk_pep_set_is_cable_out_occur(true);
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
is_ta_connect = KAL_FALSE;
|
|
ta_check_chr_type = KAL_TRUE;
|
|
ta_cable_out_occur = KAL_TRUE;
|
|
#endif
|
|
}
|
|
|
|
/* Place charger detection and battery update here
|
|
* is used to speed up charging icon display.
|
|
*/
|
|
|
|
cable_in_uevent = 1;
|
|
|
|
mt_battery_charger_detect_check();
|
|
if (BMT_status.UI_SOC == 100 &&
|
|
BMT_status.charger_exist == KAL_TRUE) {
|
|
BMT_status.bat_charging_state = CHR_BATFULL;
|
|
BMT_status.bat_full = KAL_TRUE;
|
|
g_charging_full_reset_bat_meter = KAL_TRUE;
|
|
}
|
|
|
|
if (g_battery_soc_ready == KAL_FALSE) {
|
|
if (BMT_status.nPercent_ZCV == 0)
|
|
battery_meter_initial();
|
|
|
|
BMT_status.SOC = battery_meter_get_battery_percentage();
|
|
}
|
|
|
|
if (BMT_status.bat_vol > 0) {
|
|
mt_battery_update_status();
|
|
skip_battery_update = KAL_TRUE;
|
|
}
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
DISO_data.chr_get_diso_state = KAL_TRUE;
|
|
#endif
|
|
|
|
wake_up_bat();
|
|
} else {
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
g_vcdt_irq_delay_flag = KAL_TRUE;
|
|
#endif
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] battery thread not ready, will do after bettery init.\n",
|
|
__func__);
|
|
}
|
|
}
|
|
|
|
irqreturn_t ops_chrdet_int_handler(int irq, void *dev_id)
|
|
{
|
|
battery_log(BAT_LOG_FULL,
|
|
"[Power/Battery][chrdet_bat_int_handler]....\n");
|
|
|
|
do_chrdet_int_task();
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
void BAT_thread(void)
|
|
{
|
|
static enum kal_bool battery_meter_initilized;
|
|
|
|
if (battery_meter_initilized == KAL_FALSE) {
|
|
/* move from battery_probe() to decrease booting time */
|
|
battery_meter_initial();
|
|
BMT_status.nPercent_ZCV =
|
|
battery_meter_get_battery_nPercent_zcv();
|
|
battery_meter_initilized = KAL_TRUE;
|
|
#if defined(CONFIG_POWER_EXT)
|
|
#else
|
|
BMT_status.SOC = gFG_capacity_by_c;
|
|
BMT_status.UI_SOC = gFG_capacity_by_c;
|
|
BMT_status.ZCV = battery_meter_get_battery_zcv();
|
|
BMT_status.temperatureV =
|
|
battery_meter_get_tempV();
|
|
BMT_status.temperatureR =
|
|
battery_meter_get_tempR(BMT_status.temperatureV);
|
|
BMT_status.bat_vol =
|
|
battery_meter_get_battery_voltage(KAL_TRUE);
|
|
BMT_status.temperature =
|
|
battery_meter_get_battery_temperature();
|
|
battery_update(&battery_main);
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[battery_meter_initilized] uisoc=soc=%d.\n",
|
|
gFG_capacity_by_c);
|
|
#endif
|
|
}
|
|
|
|
mt_battery_charger_detect_check();
|
|
mt_battery_GetBatteryData();
|
|
if (BMT_status.charger_exist == KAL_TRUE)
|
|
check_battery_exist();
|
|
|
|
mt_battery_thermal_check();
|
|
mt_battery_notify_check();
|
|
|
|
if ((BMT_status.charger_exist == KAL_TRUE) &&
|
|
(battery_suspended == KAL_FALSE)) {
|
|
mt_battery_CheckBatteryStatus();
|
|
mt_battery_charging_algorithm();
|
|
}
|
|
|
|
mt_battery_update_status();
|
|
mt_kpoc_power_off_check();
|
|
}
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Internal API */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
|
|
#ifdef BATTERY_CDP_WORKAROUND2
|
|
/*extern enum kal_bool is_usb_rdy(void);*/
|
|
#endif
|
|
|
|
int bat_thread_kthread(void *x)
|
|
{
|
|
ktime_t ktime = ktime_set(3, 0); /* 10s, 10* 1000 ms */
|
|
|
|
#ifdef BATTERY_CDP_WORKAROUND2
|
|
if (is_usb_rdy() == KAL_FALSE) {
|
|
battery_log(BAT_LOG_CRTI, "CDP, block\n");
|
|
wait_event(bat_thread_wq, (is_usb_rdy() == KAL_TRUE));
|
|
battery_log(BAT_LOG_CRTI, "CDP, free\n");
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI, "CDP, PASS\n");
|
|
}
|
|
#endif
|
|
#if defined(BATTERY_SW_INIT)
|
|
battery_charging_control(CHARGING_CMD_SW_INIT, NULL);
|
|
#endif
|
|
|
|
/* Run on a process content */
|
|
while (1) {
|
|
mutex_lock(&bat_mutex);
|
|
|
|
if (((chargin_hw_init_done == KAL_TRUE) &&
|
|
(battery_suspended == KAL_FALSE)) ||
|
|
((chargin_hw_init_done == KAL_TRUE) &&
|
|
(fg_wake_up_bat == KAL_TRUE)))
|
|
BAT_thread();
|
|
|
|
mutex_unlock(&bat_mutex);
|
|
|
|
#ifdef FG_BAT_INT
|
|
if (fg_wake_up_bat == KAL_TRUE) {
|
|
__pm_relax(battery_fg_lock);
|
|
fg_wake_up_bat = KAL_FALSE;
|
|
battery_log(BAT_LOG_CRTI, "unlock battery_fg_lock\n");
|
|
}
|
|
#endif /* #ifdef FG_BAT_INT */
|
|
|
|
battery_log(BAT_LOG_FULL, "wait event\n");
|
|
|
|
wait_event(bat_thread_wq, (bat_thread_timeout == KAL_TRUE));
|
|
|
|
bat_thread_timeout = KAL_FALSE;
|
|
hrtimer_start(&battery_kthread_timer, ktime, HRTIMER_MODE_REL);
|
|
ktime = ktime_set(BAT_TASK_PERIOD, 0); /* 10s, 10* 1000 ms */
|
|
/* for charger plug in/ out */
|
|
if (chr_wake_up_bat == KAL_TRUE && g_smartbook_update != 1) {
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if (DISO_data.chr_get_diso_state) {
|
|
DISO_data.chr_get_diso_state = KAL_FALSE;
|
|
battery_charging_control(
|
|
CHARGING_CMD_GET_DISO_STATE,
|
|
&DISO_data);
|
|
}
|
|
#endif
|
|
|
|
g_smartbook_update = 0;
|
|
battery_meter_reset();
|
|
chr_wake_up_bat = KAL_FALSE;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Charger plug in/out, Call battery_meter_reset. (%d)\n",
|
|
BMT_status.UI_SOC);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bat_thread_wakeup(void)
|
|
{
|
|
battery_log(BAT_LOG_FULL,
|
|
"******** battery : %s ********\n", __func__);
|
|
|
|
bat_thread_timeout = KAL_TRUE;
|
|
bat_meter_timeout = KAL_TRUE;
|
|
#ifdef MTK_ENABLE_AGING_ALGORITHM
|
|
suspend_time = 0;
|
|
#endif
|
|
_g_bat_sleep_total_time = 0;
|
|
wake_up(&bat_thread_wq);
|
|
}
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // fop API */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static long adc_cali_ioctl(struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int *user_data_addr;
|
|
int *naram_data_addr;
|
|
int i = 0;
|
|
int ret = 0;
|
|
int adc_in_data[2] = {1, 1};
|
|
int adc_out_data[2] = {1, 1};
|
|
|
|
switch (cmd) {
|
|
case TEST_ADC_CALI_PRINT:
|
|
g_ADC_Cali = KAL_FALSE;
|
|
break;
|
|
|
|
case SET_ADC_CALI_Slop:
|
|
naram_data_addr = (int *)arg;
|
|
ret = copy_from_user(adc_cali_slop, naram_data_addr, 36);
|
|
/* enable calibration after setting ADC_CALI_Cal */
|
|
g_ADC_Cali = KAL_FALSE;
|
|
/* Protection */
|
|
for (i = 0; i < 14; i++) {
|
|
if ((*(adc_cali_slop + i) == 0) ||
|
|
(*(adc_cali_slop + i) == 1))
|
|
*(adc_cali_slop + i) = 1000;
|
|
}
|
|
for (i = 0; i < 14; i++)
|
|
battery_log(BAT_LOG_CRTI, "adc_cali_slop[%d] = %d\n", i,
|
|
*(adc_cali_slop + i));
|
|
battery_log(BAT_LOG_FULL,
|
|
"**** unlocked_ioctl : SET_ADC_CALI_Slop Done!\n");
|
|
break;
|
|
|
|
case SET_ADC_CALI_Offset:
|
|
naram_data_addr = (int *)arg;
|
|
ret = copy_from_user(adc_cali_offset, naram_data_addr, 36);
|
|
/* enable calibration after setting ADC_CALI_Cal */
|
|
g_ADC_Cali = KAL_FALSE;
|
|
for (i = 0; i < 14; i++)
|
|
battery_log(BAT_LOG_CRTI, "adc_cali_offset[%d] = %d\n",
|
|
i, *(adc_cali_offset + i));
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"**** unlocked_ioctl : SET_ADC_CALI_Offset Done!\n");
|
|
break;
|
|
|
|
case SET_ADC_CALI_Cal:
|
|
naram_data_addr = (int *)arg;
|
|
ret = copy_from_user(adc_cali_cal, naram_data_addr, 4);
|
|
g_ADC_Cali = KAL_TRUE;
|
|
if (adc_cali_cal[0] == 1)
|
|
g_ADC_Cali = KAL_TRUE;
|
|
else
|
|
g_ADC_Cali = KAL_FALSE;
|
|
|
|
for (i = 0; i < 1; i++)
|
|
battery_log(BAT_LOG_CRTI, "adc_cali_cal[%d] = %d\n", i,
|
|
*(adc_cali_cal + i));
|
|
battery_log(BAT_LOG_FULL,
|
|
"**** unlocked_ioctl : SET_ADC_CALI_Cal Done!\n");
|
|
break;
|
|
|
|
case ADC_CHANNEL_READ:
|
|
/* g_ADC_Cali = KAL_FALSE; */ /* 20100508 Infinity */
|
|
user_data_addr = (int *)arg;
|
|
/* 2*int = 2*4 */
|
|
ret = copy_from_user(adc_in_data, user_data_addr, 8);
|
|
|
|
if (adc_in_data[0] == 0) { /* I_SENSE */
|
|
adc_out_data[0] =
|
|
battery_meter_get_VSense() * adc_in_data[1];
|
|
} else if (adc_in_data[0] == 1) { /* BAT_SENSE */
|
|
adc_out_data[0] =
|
|
battery_meter_get_battery_voltage(KAL_TRUE) *
|
|
adc_in_data[1];
|
|
} else if (adc_in_data[0] == 3) { /* V_Charger */
|
|
adc_out_data[0] = battery_meter_get_charger_voltage() *
|
|
adc_in_data[1];
|
|
/* adc_out_data[0] = adc_out_data[0] / 100; */
|
|
} else if (adc_in_data[0] == 30) {
|
|
/* V_Bat_temp magic number */
|
|
adc_out_data[0] =
|
|
battery_meter_get_battery_temperature() *
|
|
adc_in_data[1];
|
|
} else if (adc_in_data[0] == 66) {
|
|
adc_out_data[0] =
|
|
(battery_meter_get_battery_current()) / 10;
|
|
|
|
/* charging */
|
|
if (battery_meter_get_battery_current_sign() ==
|
|
KAL_TRUE)
|
|
adc_out_data[0] = 0 - adc_out_data[0];
|
|
|
|
} else {
|
|
battery_log(BAT_LOG_FULL, "unknown channel(%d,%d)\n",
|
|
adc_in_data[0], adc_in_data[1]);
|
|
}
|
|
|
|
if (adc_out_data[0] < 0)
|
|
adc_out_data[1] = 1; /* failed */
|
|
else
|
|
adc_out_data[1] = 0; /* success */
|
|
|
|
if (adc_in_data[0] == 30)
|
|
adc_out_data[1] = 0; /* success */
|
|
|
|
if (adc_in_data[0] == 66)
|
|
adc_out_data[1] = 0; /* success */
|
|
|
|
ret = copy_to_user(user_data_addr, adc_out_data, 8);
|
|
battery_log(BAT_LOG_CRTI,
|
|
"*** unlocked_ioctl : Channel %d * %d times = %d\n",
|
|
adc_in_data[0], adc_in_data[1], adc_out_data[0]);
|
|
break;
|
|
|
|
case BAT_STATUS_READ:
|
|
user_data_addr = (int *)arg;
|
|
ret = copy_from_user(battery_in_data, user_data_addr, 4);
|
|
/* [0] is_CAL */
|
|
if (g_ADC_Cali)
|
|
battery_out_data[0] = 1;
|
|
else
|
|
battery_out_data[0] = 0;
|
|
|
|
ret = copy_to_user(user_data_addr, battery_out_data, 4);
|
|
battery_log(BAT_LOG_CRTI, "**** unlocked_ioctl : CAL:%d\n",
|
|
battery_out_data[0]);
|
|
break;
|
|
|
|
case Set_Charger_Current: /* For Factory Mode */
|
|
mutex_lock(&bat_mutex);
|
|
|
|
user_data_addr = (int *)arg;
|
|
ret = copy_from_user(charging_level_data, user_data_addr, 4);
|
|
g_ftm_battery_flag = KAL_TRUE;
|
|
if (charging_level_data[0] == 0)
|
|
charging_level_data[0] = CHARGE_CURRENT_70_00_MA;
|
|
else if (charging_level_data[0] == 1)
|
|
charging_level_data[0] = CHARGE_CURRENT_200_00_MA;
|
|
else if (charging_level_data[0] == 2)
|
|
charging_level_data[0] = CHARGE_CURRENT_400_00_MA;
|
|
else if (charging_level_data[0] == 3)
|
|
charging_level_data[0] = CHARGE_CURRENT_450_00_MA;
|
|
else if (charging_level_data[0] == 4)
|
|
charging_level_data[0] = CHARGE_CURRENT_550_00_MA;
|
|
else if (charging_level_data[0] == 5)
|
|
charging_level_data[0] = CHARGE_CURRENT_650_00_MA;
|
|
else if (charging_level_data[0] == 6)
|
|
charging_level_data[0] = CHARGE_CURRENT_700_00_MA;
|
|
else if (charging_level_data[0] == 7)
|
|
charging_level_data[0] = CHARGE_CURRENT_800_00_MA;
|
|
else if (charging_level_data[0] == 8)
|
|
charging_level_data[0] = CHARGE_CURRENT_900_00_MA;
|
|
else if (charging_level_data[0] == 9)
|
|
charging_level_data[0] = CHARGE_CURRENT_1000_00_MA;
|
|
else if (charging_level_data[0] == 10)
|
|
charging_level_data[0] = CHARGE_CURRENT_1100_00_MA;
|
|
else if (charging_level_data[0] == 11)
|
|
charging_level_data[0] = CHARGE_CURRENT_1200_00_MA;
|
|
else if (charging_level_data[0] == 12)
|
|
charging_level_data[0] = CHARGE_CURRENT_1300_00_MA;
|
|
else if (charging_level_data[0] == 13)
|
|
charging_level_data[0] = CHARGE_CURRENT_1400_00_MA;
|
|
else if (charging_level_data[0] == 14)
|
|
charging_level_data[0] = CHARGE_CURRENT_1500_00_MA;
|
|
else if (charging_level_data[0] == 15)
|
|
charging_level_data[0] = CHARGE_CURRENT_1600_00_MA;
|
|
else
|
|
charging_level_data[0] = CHARGE_CURRENT_450_00_MA;
|
|
|
|
mutex_unlock(&bat_mutex);
|
|
|
|
wake_up_bat();
|
|
battery_log(BAT_LOG_CRTI,
|
|
"*** unlocked_ioctl : set_Charger_Current:%d\n",
|
|
charging_level_data[0]);
|
|
break;
|
|
/* add for meta tool------------------------------- */
|
|
case Get_META_BAT_VOL:
|
|
user_data_addr = (int *)arg;
|
|
ret = copy_from_user(adc_in_data, user_data_addr, 8);
|
|
adc_out_data[0] = BMT_status.bat_vol;
|
|
ret = copy_to_user(user_data_addr, adc_out_data, 8);
|
|
|
|
break;
|
|
case Get_META_BAT_SOC:
|
|
user_data_addr = (int *)arg;
|
|
ret = copy_from_user(adc_in_data, user_data_addr, 8);
|
|
adc_out_data[0] = BMT_status.UI_SOC;
|
|
ret = copy_to_user(user_data_addr, adc_out_data, 8);
|
|
|
|
break;
|
|
/* add bing meta tool------------------------------- */
|
|
|
|
default:
|
|
g_ADC_Cali = KAL_FALSE;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adc_cali_open(struct inode *inode, struct file *file)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int adc_cali_release(struct inode *inode, struct file *file)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations adc_cali_fops = {
|
|
.owner = THIS_MODULE,
|
|
.unlocked_ioctl = adc_cali_ioctl,
|
|
.open = adc_cali_open,
|
|
.release = adc_cali_release,
|
|
};
|
|
|
|
void check_battery_exist(void)
|
|
{
|
|
#if defined(CONFIG_DIS_CHECK_BATTERY)
|
|
battery_log(BAT_LOG_CRTI, "[BATTERY] Disable check battery exist.\n");
|
|
#else
|
|
unsigned int baton_count = 0;
|
|
unsigned int charging_enable = KAL_FALSE;
|
|
unsigned int battery_status;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
battery_charging_control(CHARGING_CMD_GET_BATTERY_STATUS,
|
|
&battery_status);
|
|
baton_count += battery_status;
|
|
}
|
|
|
|
if (baton_count >= 3) {
|
|
if ((g_platform_boot_mode == META_BOOT) ||
|
|
(g_platform_boot_mode == ADVMETA_BOOT) ||
|
|
(g_platform_boot_mode == ATE_FACTORY_BOOT)) {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[BATTERY] boot mode = %d, bypass battery check\n",
|
|
g_platform_boot_mode);
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BATTERY] Battery is not exist, power off FAN5405 and system (%d)\n",
|
|
baton_count);
|
|
|
|
battery_charging_control(CHARGING_CMD_ENABLE,
|
|
&charging_enable);
|
|
#ifdef CONFIG_MTK_POWER_PATH_MANAGEMENT_SUPPORT
|
|
battery_charging_control(
|
|
CHARGING_CMD_SET_PLATFORM_RESET, NULL);
|
|
#else
|
|
battery_charging_control(CHARGING_CMD_SET_POWER_OFF,
|
|
NULL);
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if defined(MTK_PLUG_OUT_DETECTION)
|
|
|
|
void charger_plug_out_sw_mode(void)
|
|
{
|
|
signed int ICharging = 0;
|
|
signed short i;
|
|
signed short cnt = 0;
|
|
enum kal_bool enable;
|
|
unsigned int charging_enable;
|
|
signed int VCharger = 0;
|
|
|
|
if (BMT_status.charger_exist == KAL_TRUE) {
|
|
if (chargin_hw_init_done && upmu_is_chr_det() == KAL_TRUE) {
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
enable =
|
|
pmic_get_register_value(PMIC_RG_CHR_EN);
|
|
|
|
if (enable == 1) {
|
|
ICharging =
|
|
battery_meter_get_charging_current_imm();
|
|
VCharger =
|
|
battery_meter_get_charger_voltage();
|
|
if (ICharging < 70 && VCharger < 4400) {
|
|
cnt++;
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s]fail ICharging=%d , VCHR=%d cnt=%d\n",
|
|
__func__, ICharging,
|
|
VCharger, cnt);
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s]success ICharging=%d, VCHR=%d, cnt=%d\n",
|
|
__func__, ICharging,
|
|
VCharger, cnt);
|
|
break;
|
|
}
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (cnt >= 3) {
|
|
charging_enable = KAL_FALSE;
|
|
battery_charging_control(CHARGING_CMD_ENABLE,
|
|
&charging_enable);
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] ICharging=%d VCHR=%d cnt=%d turn off charging\n",
|
|
__func__, ICharging, VCharger, cnt);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*extern unsigned int upmu_get_reg_value(unsigned int reg);*/
|
|
void hv_sw_mode(void)
|
|
{
|
|
enum kal_bool hv_status;
|
|
unsigned int charging_enable;
|
|
|
|
if (upmu_is_chr_det() == KAL_TRUE)
|
|
check_battery_exist();
|
|
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(CHARGING_CMD_GET_HV_STATUS,
|
|
&hv_status);
|
|
|
|
if (hv_status == KAL_TRUE) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[charger_hv_detect_sw_thread_handler] charger hv\n");
|
|
|
|
charging_enable = KAL_FALSE;
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(CHARGING_CMD_ENABLE,
|
|
&charging_enable);
|
|
} else
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[charger_hv_detect_sw_thread_handler] upmu_chr_get_vcdt_hv_det() != 1\n");
|
|
|
|
/* battery_log(BAT_LOG_CRTI,
|
|
* "[PMIC_BIAS_GEN_EN & PMIC_BIAS_GEN_EN_SEL] 0xa=0x%x\n",
|
|
* upmu_get_reg_value(0x000a));
|
|
*/
|
|
if (pmic_get_register_value(PMIC_BIAS_GEN_EN) == 1 ||
|
|
pmic_get_register_value(PMIC_BIAS_GEN_EN_SEL) == 0) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[PMIC_BIAS_GEN_EN & PMIC_BIAS_GEN_EN_SEL] be writen 0xa=0x%x\n",
|
|
upmu_get_reg_value(0x000a));
|
|
|
|
#if defined(CONFIG_ARCH_MT6735) || defined(CONFIG_ARCH_MT6735M) || \
|
|
defined(CONFIG_ARCH_MT6753)
|
|
pr_info("HWCID:0x%x\n", pmic_get_register_value(PMIC_HWCID));
|
|
pr_info("VCORE1_CON9:0x%x\n", upmu_get_reg_value(0x0612));
|
|
pr_info("DEW_DIO_EN:0x%x\n", upmu_get_reg_value(0x02d4));
|
|
pr_info("DEW_READ_TEST:0x%x\n", upmu_get_reg_value(0x02d6));
|
|
pmic_config_interface(0x2d8, 0x1234, 0xffff, 0);
|
|
pr_info("DEW_WRITE_TEST:0x%x\n", upmu_get_reg_value(0x02d8));
|
|
pr_info("INT_STATUS0:0x%x\n", upmu_get_reg_value(0x02C4));
|
|
pr_info("INT_STATUS0:0x%x\n", upmu_get_reg_value(0x02C4));
|
|
pmic_config_interface(0x2d8, 0xabcd, 0xffff, 0);
|
|
pr_info("DEW_WRITE_TEST:0x%x\n", upmu_get_reg_value(0x02d8));
|
|
|
|
pwrap_dump_ap_register();
|
|
#endif
|
|
WARN_ON(1);
|
|
}
|
|
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(CHARGING_CMD_RESET_WATCH_DOG_TIMER,
|
|
NULL);
|
|
}
|
|
|
|
int charger_hv_detect_sw_thread_handler(void *unused)
|
|
{
|
|
ktime_t ktime;
|
|
unsigned int hv_voltage = batt_cust_data.v_charger_max * 1000;
|
|
|
|
unsigned char cnt = 0;
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
hv_voltage = DISO_data.hv_voltage;
|
|
#endif
|
|
|
|
do {
|
|
|
|
if (BMT_status.charger_exist == KAL_TRUE)
|
|
ktime = ktime_set(0, BAT_MS_TO_NS(200));
|
|
else
|
|
ktime = ktime_set(0, BAT_MS_TO_NS(1000));
|
|
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(CHARGING_CMD_SET_HV_THRESHOLD,
|
|
&hv_voltage);
|
|
|
|
wait_event_interruptible(charger_hv_detect_waiter,
|
|
(charger_hv_detect_flag == KAL_TRUE));
|
|
|
|
if (BMT_status.charger_exist == KAL_TRUE) {
|
|
if (cnt >= 5) {
|
|
/* battery_log(BAT_LOG_CRTI, */
|
|
/* "[charger_hv_detect_sw_thread_handler]*/
|
|
/* charger in do hv_sw_mode\n"); */
|
|
hv_sw_mode();
|
|
cnt = 0;
|
|
} else {
|
|
cnt++;
|
|
}
|
|
|
|
/* battery_log(BAT_LOG_CRTI, */
|
|
/* "[charger_hv_detect_sw_thread_handler] */
|
|
/* charger in cnt=%d\n",cnt); */
|
|
charger_plug_out_sw_mode();
|
|
} else {
|
|
/* battery_log(BAT_LOG_CRTI, */
|
|
/* "[charger_hv_detect_sw_thread_handler] */
|
|
/* charger out do hv_sw_mode\n"); */
|
|
hv_sw_mode();
|
|
}
|
|
|
|
charger_hv_detect_flag = KAL_FALSE;
|
|
hrtimer_start(&charger_hv_detect_timer, ktime,
|
|
HRTIMER_MODE_REL);
|
|
|
|
} while (!kthread_should_stop());
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
int charger_hv_detect_sw_thread_handler(void *unused)
|
|
{
|
|
ktime_t ktime;
|
|
unsigned int charging_enable;
|
|
unsigned int hv_voltage = batt_cust_data.v_charger_max * 1000;
|
|
enum kal_bool hv_status;
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
hv_voltage = DISO_data.hv_voltage;
|
|
#endif
|
|
|
|
do {
|
|
#ifdef CONFIG_MTK_BQ25896_SUPPORT
|
|
/* this annoying SW workaround wakes up bat_thread. */
|
|
/* 10 secs isset instead of 1 sec */
|
|
ktime = ktime_set(BAT_TASK_PERIOD, 0);
|
|
#else
|
|
ktime = ktime_set(0, BAT_MS_TO_NS(1000));
|
|
#endif
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(CHARGING_CMD_SET_HV_THRESHOLD,
|
|
&hv_voltage);
|
|
wait_event_interruptible(charger_hv_detect_waiter,
|
|
(charger_hv_detect_flag == KAL_TRUE));
|
|
|
|
if (upmu_is_chr_det() == KAL_TRUE)
|
|
check_battery_exist();
|
|
|
|
charger_hv_detect_flag = KAL_FALSE;
|
|
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(CHARGING_CMD_GET_HV_STATUS,
|
|
&hv_status);
|
|
|
|
if (hv_status == KAL_TRUE) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] charger hv\n", __func__);
|
|
|
|
charging_enable = KAL_FALSE;
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(CHARGING_CMD_ENABLE,
|
|
&charging_enable);
|
|
} else {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[%s] upmu_chr_get_vcdt_hv_det() != 1\n",
|
|
__func__);
|
|
}
|
|
|
|
if (chargin_hw_init_done)
|
|
battery_charging_control(
|
|
CHARGING_CMD_RESET_WATCH_DOG_TIMER, NULL);
|
|
|
|
hrtimer_start(&charger_hv_detect_timer, ktime,
|
|
HRTIMER_MODE_REL);
|
|
|
|
} while (!kthread_should_stop());
|
|
|
|
return 0;
|
|
}
|
|
#endif /* #if defined(MTK_PLUG_OUT_DETECTION) */
|
|
|
|
enum hrtimer_restart charger_hv_detect_sw_workaround(struct hrtimer *timer)
|
|
{
|
|
charger_hv_detect_flag = KAL_TRUE;
|
|
wake_up_interruptible(&charger_hv_detect_waiter);
|
|
|
|
battery_log(BAT_LOG_FULL, "[%s]\n", __func__);
|
|
|
|
return HRTIMER_NORESTART;
|
|
}
|
|
|
|
void charger_hv_detect_sw_workaround_init(void)
|
|
{
|
|
ktime_t ktime;
|
|
|
|
ktime = ktime_set(0, BAT_MS_TO_NS(2000));
|
|
hrtimer_init(&charger_hv_detect_timer, CLOCK_MONOTONIC,
|
|
HRTIMER_MODE_REL);
|
|
charger_hv_detect_timer.function = charger_hv_detect_sw_workaround;
|
|
hrtimer_start(&charger_hv_detect_timer, ktime, HRTIMER_MODE_REL);
|
|
|
|
charger_hv_detect_thread =
|
|
kthread_run(charger_hv_detect_sw_thread_handler, 0,
|
|
"mtk charger_hv_detect_sw_workaround");
|
|
if (IS_ERR(charger_hv_detect_thread)) {
|
|
battery_log(
|
|
BAT_LOG_FULL,
|
|
"[%s]: failed to create charger_hv_detect_sw_workaround thread\n",
|
|
__func__);
|
|
}
|
|
battery_log(BAT_LOG_CRTI,
|
|
"%s : done\n", __func__);
|
|
}
|
|
|
|
enum hrtimer_restart battery_kthread_hrtimer_func(struct hrtimer *timer)
|
|
{
|
|
bat_thread_wakeup();
|
|
|
|
return HRTIMER_NORESTART;
|
|
}
|
|
|
|
void battery_kthread_hrtimer_init(void)
|
|
{
|
|
ktime_t ktime;
|
|
#ifdef CONFIG_MTK_BQ25896_SUPPORT
|
|
/*watchdog timer before 40 secs*/
|
|
ktime = ktime_set(BAT_TASK_PERIOD, 0); /* 3s, 10* 1000 ms */
|
|
#else
|
|
ktime = ktime_set(1, 0);
|
|
#endif
|
|
hrtimer_init(&battery_kthread_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
|
battery_kthread_timer.function = battery_kthread_hrtimer_func;
|
|
hrtimer_start(&battery_kthread_timer, ktime, HRTIMER_MODE_REL);
|
|
|
|
battery_log(BAT_LOG_CRTI, "%s : done\n", __func__);
|
|
}
|
|
|
|
static void get_charging_control(void)
|
|
{
|
|
#if defined(CONFIG_ONTIM_POWER_DRIVER)
|
|
int idx = 0;
|
|
|
|
if (battery_charging_control == NULL) {
|
|
for (idx = 0;
|
|
idx < sizeof(charger_candidate_func) /
|
|
sizeof(struct charger_candidate_table);
|
|
idx++) {
|
|
if (charger_candidate_func[idx].exist_fun() == 0) {
|
|
battery_log(BAT_LOG_CRTI, "charger %s found\n",
|
|
charger_candidate_func[idx].name);
|
|
battery_charging_control =
|
|
charger_candidate_func[idx]
|
|
.chr_ctrl_intf;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (battery_charging_control == NULL)
|
|
battery_log(BAT_LOG_CRTI,
|
|
"can't find any charger driver\n");
|
|
}
|
|
#else
|
|
battery_charging_control = chr_control_interface;
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
static irqreturn_t diso_auxadc_irq_thread(int irq, void *dev_id)
|
|
{
|
|
int pre_diso_state = (DISO_data.diso_state.pre_otg_state |
|
|
(DISO_data.diso_state.pre_vusb_state << 1) |
|
|
(DISO_data.diso_state.pre_vdc_state << 2)) &
|
|
0x7;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[DISO]auxadc IRQ threaded handler triggered, pre_diso_state is %s\n",
|
|
DISO_state_s[pre_diso_state]);
|
|
|
|
switch (pre_diso_state) {
|
|
#ifdef MTK_DISCRETE_SWITCH /*for DSC DC plugin handle */
|
|
case USB_ONLY:
|
|
#endif
|
|
case OTG_ONLY:
|
|
BMT_status.charger_exist = KAL_TRUE;
|
|
__pm_stay_awake(battery_suspend_lock);
|
|
wake_up_bat();
|
|
break;
|
|
case DC_WITH_OTG:
|
|
BMT_status.charger_exist = KAL_FALSE;
|
|
/* need stop charger quickly */
|
|
battery_charging_control(CHARGING_CMD_ENABLE,
|
|
&BMT_status.charger_exist);
|
|
/* reset charger status */
|
|
BMT_status.charger_exist = KAL_FALSE;
|
|
BMT_status.charger_type = CHARGER_UNKNOWN;
|
|
__pm_relax(battery_suspend_lock);
|
|
wake_up_bat();
|
|
break;
|
|
case DC_WITH_USB:
|
|
/*usb delayed work will reflact BMT_staus,
|
|
* so need update state ASAP
|
|
*/
|
|
if ((BMT_status.charger_type == STANDARD_HOST) ||
|
|
(BMT_status.charger_type == CHARGING_HOST))
|
|
mt_usb_disconnect_v1();
|
|
|
|
BMT_status.charger_type = CHARGER_UNKNOWN; /* reset chr_type */
|
|
wake_up_bat();
|
|
break;
|
|
case DC_ONLY:
|
|
BMT_status.charger_type = CHARGER_UNKNOWN;
|
|
/* plug in VUSB, check if need connect usb */
|
|
mt_battery_charger_detect_check();
|
|
break;
|
|
default:
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[DISO]VUSB auxadc threaded handler triggered ERROR OR TEST\n");
|
|
break;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void dual_input_init(void)
|
|
{
|
|
DISO_data.irq_callback_func = diso_auxadc_irq_thread;
|
|
battery_charging_control(CHARGING_CMD_DISO_INIT, &DISO_data);
|
|
}
|
|
#endif
|
|
|
|
int __batt_init_cust_data_from_cust_header(void)
|
|
{
|
|
/* mt_charging.h */
|
|
/* stop charging while in talking mode */
|
|
#if defined(STOP_CHARGING_IN_TAKLING)
|
|
batt_cust_data.stop_charging_in_takling = 1;
|
|
#else /* #if defined(STOP_CHARGING_IN_TAKLING) */
|
|
batt_cust_data.stop_charging_in_takling = 0;
|
|
#endif /* #if defined(STOP_CHARGING_IN_TAKLING) */
|
|
|
|
#if defined(TALKING_RECHARGE_VOLTAGE)
|
|
batt_cust_data.talking_recharge_voltage = TALKING_RECHARGE_VOLTAGE;
|
|
#endif
|
|
|
|
#if defined(TALKING_SYNC_TIME)
|
|
batt_cust_data.talking_sync_time = TALKING_SYNC_TIME;
|
|
#endif
|
|
|
|
/* Battery Temperature Protection */
|
|
#if defined(MTK_TEMPERATURE_RECHARGE_SUPPORT)
|
|
batt_cust_data.mtk_temperature_recharge_support = 1;
|
|
#else /* #if defined(MTK_TEMPERATURE_RECHARGE_SUPPORT) */
|
|
batt_cust_data.mtk_temperature_recharge_support = 0;
|
|
#endif /* #if defined(MTK_TEMPERATURE_RECHARGE_SUPPORT) */
|
|
|
|
#if defined(MAX_CHARGE_TEMPERATURE)
|
|
batt_cust_data.max_charge_temperature = MAX_CHARGE_TEMPERATURE;
|
|
#endif
|
|
|
|
#if defined(MAX_CHARGE_TEMPERATURE_MINUS_X_DEGREE)
|
|
batt_cust_data.max_charge_temperature_minus_x_degree =
|
|
MAX_CHARGE_TEMPERATURE_MINUS_X_DEGREE;
|
|
#endif
|
|
|
|
#if defined(MIN_CHARGE_TEMPERATURE)
|
|
batt_cust_data.min_charge_temperature = MIN_CHARGE_TEMPERATURE;
|
|
#endif
|
|
|
|
#if defined(MIN_CHARGE_TEMPERATURE_PLUS_X_DEGREE)
|
|
batt_cust_data.min_charge_temperature_plus_x_degree =
|
|
MIN_CHARGE_TEMPERATURE_PLUS_X_DEGREE;
|
|
#endif
|
|
|
|
#if defined(ERR_CHARGE_TEMPERATURE)
|
|
batt_cust_data.err_charge_temperature = ERR_CHARGE_TEMPERATURE;
|
|
#endif
|
|
|
|
/* Linear Charging Threshold */
|
|
#if defined(V_PRE2CC_THRES)
|
|
batt_cust_data.v_pre2cc_thres = V_PRE2CC_THRES;
|
|
#endif
|
|
#if defined(V_CC2TOPOFF_THRES)
|
|
batt_cust_data.v_cc2topoff_thres = V_CC2TOPOFF_THRES;
|
|
#endif
|
|
#if defined(RECHARGING_VOLTAGE)
|
|
batt_cust_data.recharging_voltage = RECHARGING_VOLTAGE;
|
|
#endif
|
|
#if defined(CHARGING_FULL_CURRENT)
|
|
batt_cust_data.charging_full_current = CHARGING_FULL_CURRENT;
|
|
#endif
|
|
|
|
/* Charging Current Setting */
|
|
#if defined(CONFIG_USB_IF)
|
|
batt_cust_data.config_usb_if = 1;
|
|
#else /* #if defined(CONFIG_USB_IF) */
|
|
batt_cust_data.config_usb_if = 0;
|
|
#endif /* #if defined(CONFIG_USB_IF) */
|
|
|
|
#if defined(USB_CHARGER_CURRENT_SUSPEND)
|
|
batt_cust_data.usb_charger_current_suspend =
|
|
USB_CHARGER_CURRENT_SUSPEND;
|
|
#endif
|
|
#if defined(USB_CHARGER_CURRENT_UNCONFIGURED)
|
|
batt_cust_data.usb_charger_current_unconfigured =
|
|
USB_CHARGER_CURRENT_UNCONFIGURED;
|
|
#endif
|
|
#if defined(USB_CHARGER_CURRENT_CONFIGURED)
|
|
batt_cust_data.usb_charger_current_configured =
|
|
USB_CHARGER_CURRENT_CONFIGURED;
|
|
#endif
|
|
#if defined(USB_CHARGER_CURRENT)
|
|
batt_cust_data.usb_charger_current = USB_CHARGER_CURRENT;
|
|
#endif
|
|
#if defined(AC_CHARGER_INPUT_CURRENT)
|
|
batt_cust_data.ac_charger_input_current = AC_CHARGER_INPUT_CURRENT;
|
|
#endif
|
|
#if defined(AC_CHARGER_CURRENT)
|
|
batt_cust_data.ac_charger_current = AC_CHARGER_CURRENT;
|
|
#endif
|
|
#if defined(NON_STD_AC_CHARGER_CURRENT)
|
|
batt_cust_data.non_std_ac_charger_current = NON_STD_AC_CHARGER_CURRENT;
|
|
#endif
|
|
#if defined(CHARGING_HOST_CHARGER_CURRENT)
|
|
batt_cust_data.charging_host_charger_current =
|
|
CHARGING_HOST_CHARGER_CURRENT;
|
|
#endif
|
|
#if defined(APPLE_0_5A_CHARGER_CURRENT)
|
|
batt_cust_data.apple_0_5a_charger_current = APPLE_0_5A_CHARGER_CURRENT;
|
|
#endif
|
|
#if defined(APPLE_1_0A_CHARGER_CURRENT)
|
|
batt_cust_data.apple_1_0a_charger_current = APPLE_1_0A_CHARGER_CURRENT;
|
|
#endif
|
|
#if defined(APPLE_2_1A_CHARGER_CURRENT)
|
|
batt_cust_data.apple_2_1a_charger_current = APPLE_2_1A_CHARGER_CURRENT;
|
|
#endif
|
|
|
|
/* Precise Tuning
|
|
* batt_cust_data.battery_average_data_number =
|
|
* BATTERY_AVERAGE_DATA_NUMBER;
|
|
* batt_cust_data.battery_average_size = BATTERY_AVERAGE_SIZE;
|
|
*/
|
|
|
|
/* charger error check */
|
|
#if defined(BAT_LOW_TEMP_PROTECT_ENABLE)
|
|
batt_cust_data.bat_low_temp_protect_enable = 1;
|
|
#else /* #if defined(BAT_LOW_TEMP_PROTECT_ENABLE) */
|
|
batt_cust_data.bat_low_temp_protect_enable = 0;
|
|
#endif /* #if defined(BAT_LOW_TEMP_PROTECT_ENABLE) */
|
|
|
|
#if defined(V_CHARGER_ENABLE)
|
|
batt_cust_data.v_charger_enable = V_CHARGER_ENABLE;
|
|
#endif
|
|
#if defined(V_CHARGER_MAX)
|
|
batt_cust_data.v_charger_max = V_CHARGER_MAX;
|
|
#endif
|
|
#if defined(V_CHARGER_MIN)
|
|
batt_cust_data.v_charger_min = V_CHARGER_MIN;
|
|
#endif
|
|
|
|
/* Tracking TIME */
|
|
#if defined(ONEHUNDRED_PERCENT_TRACKING_TIME)
|
|
batt_cust_data.onehundred_percent_tracking_time =
|
|
ONEHUNDRED_PERCENT_TRACKING_TIME;
|
|
#endif
|
|
#if defined(NPERCENT_TRACKING_TIME)
|
|
batt_cust_data.npercent_tracking_time = NPERCENT_TRACKING_TIME;
|
|
#endif
|
|
#if defined(SYNC_TO_REAL_TRACKING_TIME)
|
|
batt_cust_data.sync_to_real_tracking_time = SYNC_TO_REAL_TRACKING_TIME;
|
|
#endif
|
|
#if defined(V_0PERCENT_TRACKING)
|
|
batt_cust_data.v_0percent_tracking = V_0PERCENT_TRACKING;
|
|
#endif
|
|
|
|
/* High battery support */
|
|
#if defined(HIGH_BATTERY_VOLTAGE_SUPPORT)
|
|
batt_cust_data.high_battery_voltage_support = 1;
|
|
#else /* #if defined(HIGH_BATTERY_VOLTAGE_SUPPORT) */
|
|
batt_cust_data.high_battery_voltage_support = 0;
|
|
#endif /* #if defined(HIGH_BATTERY_VOLTAGE_SUPPORT) */
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_PLUS_SUPPORT)
|
|
batt_cust_data.mtk_pump_express_plus_support = 1;
|
|
|
|
#if defined(TA_START_BATTERY_SOC)
|
|
batt_cust_data.ta_start_battery_soc = TA_START_BATTERY_SOC;
|
|
#endif
|
|
#if defined(TA_STOP_BATTERY_SOC)
|
|
batt_cust_data.ta_stop_battery_soc = TA_STOP_BATTERY_SOC;
|
|
#endif
|
|
#if defined(TA_AC_12V_INPUT_CURRENT)
|
|
batt_cust_data.ta_ac_12v_input_current = TA_AC_12V_INPUT_CURRENT;
|
|
#endif
|
|
#if defined(TA_AC_9V_INPUT_CURRENT)
|
|
batt_cust_data.ta_ac_9v_input_current = TA_AC_9V_INPUT_CURRENT;
|
|
#endif
|
|
#if defined(TA_AC_7V_INPUT_CURRENT)
|
|
batt_cust_data.ta_ac_7v_input_current = TA_AC_7V_INPUT_CURRENT;
|
|
#endif
|
|
#if defined(TA_AC_CHARGING_CURRENT)
|
|
batt_cust_data.ta_ac_charging_current = TA_AC_CHARGING_CURRENT;
|
|
#endif
|
|
#if defined(TA_9V_SUPPORT)
|
|
batt_cust_data.ta_9v_support = 1;
|
|
#endif
|
|
#if defined(TA_12V_SUPPORT)
|
|
batt_cust_data.ta_12v_support = 1;
|
|
#endif
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(BATTERY_DTS_SUPPORT) && defined(CONFIG_OF)
|
|
static void __batt_parse_node(const struct device_node *np,
|
|
const char *node_srting, int *cust_val)
|
|
{
|
|
u32 val;
|
|
|
|
if (of_property_read_u32(np, node_srting, &val) == 0) {
|
|
(*cust_val) = (int)val;
|
|
battery_log(BAT_LOG_FULL, "Get %s: %d\n", node_srting,
|
|
(*cust_val));
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI, "Get %s failed\n", node_srting);
|
|
}
|
|
}
|
|
|
|
static int __batt_init_cust_data_from_dt(void)
|
|
{
|
|
/* struct device_node *np = dev->dev.of_node; */
|
|
struct device_node *np;
|
|
|
|
/* check customer setting */
|
|
np = of_find_compatible_node(NULL, NULL, "mediatek,battery");
|
|
if (!np) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"Failed to find device-tree node: bat_comm\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
__batt_parse_node(np, "stop_charging_in_takling",
|
|
&batt_cust_data.stop_charging_in_takling);
|
|
|
|
__batt_parse_node(np, "talking_recharge_voltage",
|
|
&batt_cust_data.talking_recharge_voltage);
|
|
|
|
__batt_parse_node(np, "talking_sync_time",
|
|
&batt_cust_data.talking_sync_time);
|
|
|
|
__batt_parse_node(np, "mtk_temperature_recharge_support",
|
|
&batt_cust_data.mtk_temperature_recharge_support);
|
|
|
|
__batt_parse_node(np, "max_charge_temperature",
|
|
&batt_cust_data.max_charge_temperature);
|
|
|
|
__batt_parse_node(
|
|
np, "max_charge_temperature_minus_x_degree",
|
|
&batt_cust_data.max_charge_temperature_minus_x_degree);
|
|
|
|
__batt_parse_node(np, "min_charge_temperature",
|
|
&batt_cust_data.min_charge_temperature);
|
|
|
|
__batt_parse_node(np, "min_charge_temperature_plus_x_degree",
|
|
&batt_cust_data.min_charge_temperature_plus_x_degree);
|
|
|
|
__batt_parse_node(np, "err_charge_temperature",
|
|
&batt_cust_data.err_charge_temperature);
|
|
|
|
__batt_parse_node(np, "v_pre2cc_thres", &batt_cust_data.v_pre2cc_thres);
|
|
|
|
__batt_parse_node(np, "v_cc2topoff_thres",
|
|
&batt_cust_data.v_cc2topoff_thres);
|
|
|
|
__batt_parse_node(np, "recharging_voltage",
|
|
&batt_cust_data.recharging_voltage);
|
|
|
|
__batt_parse_node(np, "charging_full_current",
|
|
&batt_cust_data.charging_full_current);
|
|
|
|
__batt_parse_node(np, "config_usb_if", &batt_cust_data.config_usb_if);
|
|
|
|
__batt_parse_node(np, "usb_charger_current_suspend",
|
|
&batt_cust_data.usb_charger_current_suspend);
|
|
|
|
__batt_parse_node(np, "usb_charger_current_unconfigured",
|
|
&batt_cust_data.usb_charger_current_unconfigured);
|
|
|
|
__batt_parse_node(np, "usb_charger_current_configured",
|
|
&batt_cust_data.usb_charger_current_configured);
|
|
|
|
__batt_parse_node(np, "usb_charger_current",
|
|
&batt_cust_data.usb_charger_current);
|
|
|
|
__batt_parse_node(np, "ac_charger_input_current",
|
|
&batt_cust_data.ac_charger_input_current);
|
|
|
|
__batt_parse_node(np, "ac_charger_current",
|
|
&batt_cust_data.ac_charger_current);
|
|
|
|
__batt_parse_node(np, "non_std_ac_charger_current",
|
|
&batt_cust_data.non_std_ac_charger_current);
|
|
|
|
__batt_parse_node(np, "charging_host_charger_current",
|
|
&batt_cust_data.charging_host_charger_current);
|
|
|
|
__batt_parse_node(np, "apple_0_5a_charger_current",
|
|
&batt_cust_data.apple_0_5a_charger_current);
|
|
|
|
__batt_parse_node(np, "apple_1_0a_charger_current",
|
|
&batt_cust_data.apple_1_0a_charger_current);
|
|
|
|
__batt_parse_node(np, "apple_2_1a_charger_current",
|
|
&batt_cust_data.apple_2_1a_charger_current);
|
|
|
|
__batt_parse_node(np, "bat_low_temp_protect_enable",
|
|
&batt_cust_data.bat_low_temp_protect_enable);
|
|
|
|
__batt_parse_node(np, "v_charger_enable",
|
|
&batt_cust_data.v_charger_enable);
|
|
|
|
__batt_parse_node(np, "v_charger_max", &batt_cust_data.v_charger_max);
|
|
|
|
__batt_parse_node(np, "v_charger_min", &batt_cust_data.v_charger_min);
|
|
|
|
__batt_parse_node(np, "onehundred_percent_tracking_time",
|
|
&batt_cust_data.onehundred_percent_tracking_time);
|
|
|
|
__batt_parse_node(np, "npercent_tracking_time",
|
|
&batt_cust_data.npercent_tracking_time);
|
|
|
|
__batt_parse_node(np, "sync_to_real_tracking_time",
|
|
&batt_cust_data.sync_to_real_tracking_time);
|
|
|
|
__batt_parse_node(np, "v_0percent_tracking",
|
|
&batt_cust_data.v_0percent_tracking);
|
|
|
|
__batt_parse_node(np, "high_battery_voltage_support",
|
|
&batt_cust_data.high_battery_voltage_support);
|
|
|
|
__batt_parse_node(np, "mtk_jeita_standard_support",
|
|
&batt_cust_data.mtk_jeita_standard_support);
|
|
|
|
__batt_parse_node(np, "cust_soc_jeita_sync_time",
|
|
&batt_cust_data.cust_soc_jeita_sync_time);
|
|
|
|
__batt_parse_node(np, "jeita_recharge_voltage",
|
|
&batt_cust_data.jeita_recharge_voltage);
|
|
|
|
__batt_parse_node(np, "jeita_temp_above_pos_60_cv_voltage",
|
|
&batt_cust_data.jeita_temp_above_pos_60_cv_voltage);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_10_to_pos_45_cv_voltage",
|
|
&batt_cust_data.jeita_temp_pos_10_to_pos_45_cv_voltage);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_0_to_pos_10_cv_voltage",
|
|
&batt_cust_data.jeita_temp_pos_0_to_pos_10_cv_voltage);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_neg_10_to_pos_0_cv_voltage",
|
|
&batt_cust_data.jeita_temp_neg_10_to_pos_0_cv_voltage);
|
|
|
|
__batt_parse_node(np, "jeita_temp_below_neg_10_cv_voltage",
|
|
&batt_cust_data.jeita_temp_below_neg_10_cv_voltage);
|
|
|
|
__batt_parse_node(np, "jeita_neg_10_to_pos_0_full_current",
|
|
&batt_cust_data.jeita_neg_10_to_pos_0_full_current);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_45_to_pos_60_recharge_voltage",
|
|
&batt_cust_data.jeita_temp_pos_45_to_pos_60_recharge_voltage);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_10_to_pos_45_recharge_voltage",
|
|
&batt_cust_data.jeita_temp_pos_10_to_pos_45_recharge_voltage);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_0_to_pos_10_recharge_voltage",
|
|
&batt_cust_data.jeita_temp_pos_0_to_pos_10_recharge_voltage);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_neg_10_to_pos_0_recharge_voltage",
|
|
&batt_cust_data.jeita_temp_neg_10_to_pos_0_recharge_voltage);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_45_to_pos_60_cc2topoff_threshold",
|
|
&batt_cust_data
|
|
.jeita_temp_pos_45_to_pos_60_cc2topoff_threshold);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_10_to_pos_45_cc2topoff_threshold",
|
|
&batt_cust_data
|
|
.jeita_temp_pos_10_to_pos_45_cc2topoff_threshold);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_pos_0_to_pos_10_cc2topoff_threshold",
|
|
&batt_cust_data.jeita_temp_pos_0_to_pos_10_cc2topoff_threshold);
|
|
|
|
__batt_parse_node(
|
|
np, "jeita_temp_neg_10_to_pos_0_cc2topoff_threshold",
|
|
&batt_cust_data.jeita_temp_neg_10_to_pos_0_cc2topoff_threshold);
|
|
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_PLUS_SUPPORT)
|
|
__batt_parse_node(np, "mtk_pump_express_plus_support",
|
|
&batt_cust_data.mtk_pump_express_plus_support);
|
|
|
|
__batt_parse_node(np, "ta_start_battery_soc",
|
|
&batt_cust_data.ta_start_battery_soc);
|
|
|
|
__batt_parse_node(np, "ta_stop_battery_soc",
|
|
&batt_cust_data.ta_stop_battery_soc);
|
|
|
|
__batt_parse_node(np, "ta_ac_12v_input_current",
|
|
&batt_cust_data.ta_ac_12v_input_current);
|
|
|
|
__batt_parse_node(np, "ta_ac_9v_input_current",
|
|
&batt_cust_data.ta_ac_9v_input_current);
|
|
|
|
__batt_parse_node(np, "ta_ac_7v_input_current",
|
|
&batt_cust_data.ta_ac_7v_input_current);
|
|
|
|
__batt_parse_node(np, "ta_ac_charging_current",
|
|
&batt_cust_data.ta_ac_charging_current);
|
|
|
|
__batt_parse_node(np, "ta_9v_support", &batt_cust_data.ta_9v_support);
|
|
|
|
__batt_parse_node(np, "ta_12v_support", &batt_cust_data.ta_12v_support);
|
|
#endif
|
|
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int batt_init_cust_data(void)
|
|
{
|
|
__batt_init_cust_data_from_cust_header();
|
|
|
|
#if defined(BATTERY_DTS_SUPPORT) && defined(CONFIG_OF)
|
|
battery_log(BAT_LOG_CRTI, "battery custom init by DTS\n");
|
|
__batt_init_cust_data_from_dt();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int battery_probe(struct platform_device *dev)
|
|
{
|
|
struct class_device *class_dev = NULL;
|
|
int ret = 0;
|
|
|
|
battery_log(BAT_LOG_CRTI, "******** battery driver probe!! ********\n");
|
|
|
|
/* Integrate with NVRAM */
|
|
ret = alloc_chrdev_region(&adc_cali_devno, 0, 1, ADC_CALI_DEVNAME);
|
|
if (ret)
|
|
battery_log(BAT_LOG_CRTI,
|
|
"Error: Can't Get Major number for adc_cali\n");
|
|
adc_cali_cdev = cdev_alloc();
|
|
adc_cali_cdev->owner = THIS_MODULE;
|
|
adc_cali_cdev->ops = &adc_cali_fops;
|
|
ret = cdev_add(adc_cali_cdev, adc_cali_devno, 1);
|
|
if (ret)
|
|
battery_log(BAT_LOG_CRTI, "adc_cali Error: cdev_add\n");
|
|
adc_cali_major = MAJOR(adc_cali_devno);
|
|
adc_cali_class = class_create(THIS_MODULE, ADC_CALI_DEVNAME);
|
|
class_dev = (struct class_device *)device_create(
|
|
adc_cali_class, NULL, adc_cali_devno, NULL, ADC_CALI_DEVNAME);
|
|
battery_log(BAT_LOG_CRTI, "[BAT_probe] adc_cali prepare : done !!\n ");
|
|
|
|
get_charging_control();
|
|
|
|
batt_init_cust_data();
|
|
|
|
battery_charging_control(CHARGING_CMD_GET_PLATFORM_BOOT_MODE,
|
|
&g_platform_boot_mode);
|
|
battery_log(BAT_LOG_CRTI, "[BAT_probe] g_platform_boot_mode = %d\n ",
|
|
g_platform_boot_mode);
|
|
|
|
battery_fg_lock = wakeup_source_register(NULL, "battery fg wakelock");
|
|
|
|
battery_suspend_lock =
|
|
wakeup_source_register(NULL, "battery suspend wakelock");
|
|
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)
|
|
wake_lock_init(&TA_charger_suspend_lock, WAKE_LOCK_SUSPEND,
|
|
"TA charger suspend wakelock");
|
|
#endif
|
|
|
|
mtk_pep_init();
|
|
mtk_pep20_init();
|
|
|
|
/* Integrate with Android Battery Service */
|
|
ac_main.psy = power_supply_register(&(dev->dev), &ac_main.psd, NULL);
|
|
if (IS_ERR(ac_main.psy)) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register AC Fail !!\n");
|
|
ret = PTR_ERR(ac_main.psy);
|
|
return ret;
|
|
}
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register AC Success !!\n");
|
|
|
|
usb_main.psy = power_supply_register(&(dev->dev), &usb_main.psd, NULL);
|
|
if (IS_ERR(usb_main.psy)) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register USB Fail !!\n");
|
|
ret = PTR_ERR(usb_main.psy);
|
|
return ret;
|
|
}
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register USB Success !!\n");
|
|
|
|
wireless_main.psy =
|
|
power_supply_register(&(dev->dev), &wireless_main.psd, NULL);
|
|
if (IS_ERR(wireless_main.psy)) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register WIRELESS Fail !!\n");
|
|
ret = PTR_ERR(wireless_main.psy);
|
|
return ret;
|
|
}
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register WIRELESS Success !!\n");
|
|
|
|
battery_main.psy =
|
|
power_supply_register(&(dev->dev), &battery_main.psd, NULL);
|
|
if (IS_ERR(battery_main.psy)) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register Battery Fail !!\n");
|
|
ret = PTR_ERR(battery_main.psy);
|
|
return ret;
|
|
}
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[BAT_probe] power_supply_register Battery Success !!\n");
|
|
|
|
#if !defined(CONFIG_POWER_EXT)
|
|
|
|
#ifdef CONFIG_MTK_POWER_EXT_DETECT
|
|
if (bat_is_ext_power() == KAL_TRUE) {
|
|
battery_main.BAT_STATUS = POWER_SUPPLY_STATUS_FULL;
|
|
battery_main.BAT_HEALTH = POWER_SUPPLY_HEALTH_GOOD;
|
|
battery_main.BAT_PRESENT = 1;
|
|
battery_main.BAT_TECHNOLOGY = POWER_SUPPLY_TECHNOLOGY_LION;
|
|
battery_main.BAT_CAPACITY = 100;
|
|
battery_main.BAT_batt_vol = 4200;
|
|
battery_main.BAT_batt_temp = 220;
|
|
|
|
g_bat_init_flag = KAL_TRUE;
|
|
return 0;
|
|
}
|
|
#endif
|
|
/* For EM */
|
|
{
|
|
int ret_device_file = 0;
|
|
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Charger_Voltage);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_0_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_1_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_2_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_3_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_4_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_5_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_6_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_7_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_8_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_9_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_10_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_11_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_12_Slope);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_13_Slope);
|
|
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_0_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_1_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_2_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_3_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_4_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_5_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_6_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_7_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_8_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_9_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_10_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_11_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_12_Offset);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_13_Offset);
|
|
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_ADC_Channel_Is_Calibration);
|
|
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_Power_On_Voltage);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_Power_Off_Voltage);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_Charger_TopOff_Value);
|
|
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_FG_Battery_CurrentConsumption);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_FG_SW_CoulombCounter);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_Charging_CallState);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_V_0Percent_Tracking);
|
|
|
|
ret_device_file =
|
|
device_create_file(&(dev->dev), &dev_attr_Charger_Type);
|
|
ret_device_file =
|
|
device_create_file(&(dev->dev), &dev_attr_Pump_Express);
|
|
ret_device_file = device_create_file(
|
|
&(dev->dev), &dev_attr_FG_daemon_disable);
|
|
}
|
|
|
|
/* move to mt_battery_GetBatteryData() to decrease booting time */
|
|
/* battery_meter_initial(); */
|
|
|
|
/* Initialization BMT Struct */
|
|
BMT_status.bat_exist = KAL_TRUE; /* phone must have battery */
|
|
BMT_status.charger_exist = KAL_FALSE; /* for default, no charger */
|
|
BMT_status.bat_vol = 0;
|
|
BMT_status.ICharging = 0;
|
|
BMT_status.temperature = 0;
|
|
BMT_status.charger_vol = 0;
|
|
BMT_status.total_charging_time = 0;
|
|
BMT_status.PRE_charging_time = 0;
|
|
BMT_status.CC_charging_time = 0;
|
|
BMT_status.TOPOFF_charging_time = 0;
|
|
BMT_status.POSTFULL_charging_time = 0;
|
|
BMT_status.SOC = 0;
|
|
BMT_status.UI_SOC = 0;
|
|
|
|
BMT_status.bat_charging_state = CHR_PRE;
|
|
BMT_status.bat_in_recharging_state = KAL_FALSE;
|
|
BMT_status.bat_full = KAL_FALSE;
|
|
BMT_status.nPercent_ZCV = 0;
|
|
BMT_status.nPrecent_UI_SOC_check_point =
|
|
battery_meter_get_battery_nPercent_UI_SOC();
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
dual_input_init();
|
|
#endif
|
|
|
|
/* battery kernel thread for 10s check and charger in/out event */
|
|
/* Replace GPT timer by hrtime */
|
|
battery_kthread_hrtimer_init();
|
|
|
|
kthread_run(bat_thread_kthread, NULL, "bat_thread_kthread");
|
|
battery_log(BAT_LOG_CRTI, "[%s] bat_thread_kthread Done\n", __func__);
|
|
|
|
charger_hv_detect_sw_workaround_init();
|
|
|
|
/*LOG System Set */
|
|
init_proc_log();
|
|
|
|
#else
|
|
/* keep HW alive */
|
|
/* charger_hv_detect_sw_workaround_init(); */
|
|
#endif
|
|
g_bat_init_flag = KAL_TRUE;
|
|
|
|
#if defined(CONFIG_MTK_DUAL_INPUT_CHARGER_SUPPORT)
|
|
if ((g_vcdt_irq_delay_flag == KAL_TRUE) ||
|
|
(upmu_is_chr_det() == KAL_TRUE))
|
|
do_chrdet_int_task();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void battery_timer_pause(void)
|
|
{
|
|
|
|
/* battery_log(BAT_LOG_CRTI, "**** battery driver suspend!! ****n" ); */
|
|
#ifdef CONFIG_POWER_EXT
|
|
#else
|
|
|
|
#ifdef CONFIG_MTK_POWER_EXT_DETECT
|
|
if (bat_is_ext_power() == KAL_TRUE)
|
|
return 0;
|
|
#endif
|
|
mutex_lock(&bat_mutex);
|
|
/* cancel timer */
|
|
hrtimer_cancel(&battery_kthread_timer);
|
|
hrtimer_cancel(&charger_hv_detect_timer);
|
|
|
|
battery_suspended = KAL_TRUE;
|
|
mutex_unlock(&bat_mutex);
|
|
|
|
battery_log(BAT_LOG_FULL, "@bs=1@\n");
|
|
#endif
|
|
|
|
get_monotonic_boottime(&g_bat_time_before_sleep);
|
|
}
|
|
|
|
static void battery_timer_resume(void)
|
|
{
|
|
#ifdef CONFIG_POWER_EXT
|
|
#else
|
|
enum kal_bool is_pcm_timer_trigger = KAL_FALSE;
|
|
struct timespec bat_time_after_sleep;
|
|
ktime_t ktime, hvtime;
|
|
|
|
#ifdef CONFIG_MTK_POWER_EXT_DETECT
|
|
if (bat_is_ext_power() == KAL_TRUE)
|
|
return 0;
|
|
#endif
|
|
|
|
ktime = ktime_set(BAT_TASK_PERIOD, 0); /* 10s, 10* 1000 ms */
|
|
hvtime = ktime_set(0, BAT_MS_TO_NS(2000));
|
|
|
|
get_monotonic_boottime(&bat_time_after_sleep);
|
|
battery_charging_control(CHARGING_CMD_GET_IS_PCM_TIMER_TRIGGER,
|
|
&is_pcm_timer_trigger);
|
|
|
|
if (is_pcm_timer_trigger == KAL_TRUE || bat_spm_timeout) {
|
|
mutex_lock(&bat_mutex);
|
|
BAT_thread();
|
|
mutex_unlock(&bat_mutex);
|
|
} else {
|
|
battery_log(BAT_LOG_CRTI, "battery resume NOT by pcm timer!\n");
|
|
}
|
|
|
|
if (g_call_state == CALL_ACTIVE &&
|
|
(bat_time_after_sleep.tv_sec - g_bat_time_before_sleep.tv_sec >=
|
|
batt_cust_data.talking_sync_time)) {
|
|
/* phone call last than x min */
|
|
BMT_status.UI_SOC = battery_meter_get_battery_percentage();
|
|
battery_log(BAT_LOG_CRTI, "Sync UI SOC to SOC immediately\n");
|
|
}
|
|
|
|
mutex_lock(&bat_mutex);
|
|
|
|
/* restore timer */
|
|
hrtimer_start(&battery_kthread_timer, ktime, HRTIMER_MODE_REL);
|
|
hrtimer_start(&charger_hv_detect_timer, hvtime, HRTIMER_MODE_REL);
|
|
|
|
battery_suspended = KAL_FALSE;
|
|
battery_log(BAT_LOG_FULL, "@bs=0@\n");
|
|
mutex_unlock(&bat_mutex);
|
|
|
|
#endif
|
|
}
|
|
|
|
static int battery_remove(struct platform_device *dev)
|
|
{
|
|
battery_log(BAT_LOG_CRTI,
|
|
"******** battery driver remove!! ********\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void battery_shutdown(struct platform_device *dev)
|
|
{
|
|
if (mtk_pep_get_is_connect() || mtk_pep20_get_is_connect()) {
|
|
enum CHR_CURRENT_ENUM input_current = CHARGE_CURRENT_70_00_MA;
|
|
|
|
battery_charging_control(CHARGING_CMD_SET_INPUT_CURRENT,
|
|
&input_current);
|
|
battery_log(BAT_LOG_CRTI, "%s: reset TA before shutdown\n",
|
|
__func__);
|
|
}
|
|
}
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // Battery Notify API */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
static ssize_t show_BatteryNotify(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[Battery] %s : %x\n",
|
|
__func__, g_BatteryNotifyCode);
|
|
|
|
return sprintf(buf, "%u\n", g_BatteryNotifyCode);
|
|
}
|
|
|
|
static ssize_t store_BatteryNotify(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
/*char *pvalue = NULL; */
|
|
int rv;
|
|
unsigned long reg_BatteryNotifyCode = 0;
|
|
|
|
battery_log(BAT_LOG_CRTI, "[Battery] %s\n", __func__);
|
|
if (buf != NULL && size != 0) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[Battery] buf is %s and size is %zu\n", buf, size);
|
|
rv = kstrtoul(buf, 0, ®_BatteryNotifyCode);
|
|
if (rv != 0)
|
|
return -EINVAL;
|
|
g_BatteryNotifyCode = reg_BatteryNotifyCode;
|
|
battery_log(BAT_LOG_CRTI, "[Battery] store code : %x\n",
|
|
g_BatteryNotifyCode);
|
|
}
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(BatteryNotify, 0664, show_BatteryNotify,
|
|
store_BatteryNotify);
|
|
|
|
static ssize_t show_BN_TestMode(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
battery_log(BAT_LOG_CRTI, "[Battery] %s : %x\n",
|
|
__func__, g_BN_TestMode);
|
|
return sprintf(buf, "%u\n", g_BN_TestMode);
|
|
}
|
|
|
|
static ssize_t store_BN_TestMode(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t size)
|
|
{
|
|
/*char *pvalue = NULL; */
|
|
int rv;
|
|
unsigned long reg_BN_TestMode = 0;
|
|
|
|
battery_log(BAT_LOG_CRTI, "[Battery] %s\n", __func__);
|
|
if (buf != NULL && size != 0) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[Battery] buf is %s and size is %zu\n", buf, size);
|
|
rv = kstrtoul(buf, 0, ®_BN_TestMode);
|
|
if (rv != 0)
|
|
return -EINVAL;
|
|
g_BN_TestMode = reg_BN_TestMode;
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[Battery] store g_BN_TestMode : %x\n",
|
|
g_BN_TestMode);
|
|
}
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(BN_TestMode, 0664, show_BN_TestMode, store_BN_TestMode);
|
|
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
/* // platform_driver API */
|
|
/* ////////////////////////////////////////////////////////////////////////// */
|
|
#if 0
|
|
static int battery_cmd_read(char *buf,
|
|
char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
char *p = buf;
|
|
|
|
p += sprintf(p,
|
|
"g_battery_thermal_throttling_flag=%d,battery_cmd_thermal_test_mode=%d,",
|
|
"battery_cmd_thermal_test_mode_value=%d\n",
|
|
g_battery_thermal_throttling_flag,
|
|
battery_cmd_thermal_test_mode,
|
|
battery_cmd_thermal_test_mode_value);
|
|
|
|
*start = buf + off;
|
|
|
|
len = p - buf;
|
|
if (len > off)
|
|
len -= off;
|
|
else
|
|
len = 0;
|
|
|
|
return len < count ? len : count;
|
|
}
|
|
#endif
|
|
|
|
static ssize_t battery_cmd_write(struct file *file, const char *buffer,
|
|
size_t count, loff_t *data)
|
|
{
|
|
int len = 0, bat_tt_enable = 0, bat_thr_test_mode = 0,
|
|
bat_thr_test_value = 0;
|
|
char desc[32];
|
|
|
|
len = (count < (sizeof(desc) - 1)) ? count : (sizeof(desc) - 1);
|
|
if (copy_from_user(desc, buffer, len))
|
|
return 0;
|
|
|
|
desc[len] = '\0';
|
|
|
|
if (sscanf(desc, "%d %d %d", &bat_tt_enable, &bat_thr_test_mode,
|
|
&bat_thr_test_value) == 3) {
|
|
g_battery_thermal_throttling_flag = bat_tt_enable;
|
|
battery_cmd_thermal_test_mode = bat_thr_test_mode;
|
|
battery_cmd_thermal_test_mode_value = bat_thr_test_value;
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"bat_tt_enable=%d, bat_thr_test_mode=%d, bat_thr_test_value=%d\n",
|
|
g_battery_thermal_throttling_flag,
|
|
battery_cmd_thermal_test_mode,
|
|
battery_cmd_thermal_test_mode_value);
|
|
|
|
return count;
|
|
} /*else { */
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
" bad argument, echo [bat_tt_enable] [bat_thr_test_mode] [bat_thr_test_value] > battery_cmd\n");
|
|
/*} */
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int proc_utilization_show(struct seq_file *m, void *v)
|
|
{
|
|
seq_printf(
|
|
m,
|
|
"=> g_battery_thermal_throttling_flag=%d,\nbattery_cmd_thermal_test_mode=%d,\nbattery_cmd_thermal_test_mode_value=%d\n",
|
|
g_battery_thermal_throttling_flag,
|
|
battery_cmd_thermal_test_mode,
|
|
battery_cmd_thermal_test_mode_value);
|
|
|
|
seq_printf(m,
|
|
"=> get_usb_current_unlimited=%d,\ncmd_discharging = %d\n",
|
|
get_usb_current_unlimited(), cmd_discharging);
|
|
return 0;
|
|
}
|
|
|
|
static int proc_utilization_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, proc_utilization_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations battery_cmd_proc_fops = {
|
|
.open = proc_utilization_open,
|
|
.read = seq_read,
|
|
.write = battery_cmd_write,
|
|
};
|
|
|
|
static ssize_t current_cmd_write(struct file *file, const char *buffer,
|
|
size_t count, loff_t *data)
|
|
{
|
|
int len = 0;
|
|
char desc[32];
|
|
int cmd_current_unlimited = false;
|
|
unsigned int charging_enable = false;
|
|
|
|
len = (count < (sizeof(desc) - 1)) ? count : (sizeof(desc) - 1);
|
|
if (copy_from_user(desc, buffer, len))
|
|
return 0;
|
|
|
|
desc[len] = '\0';
|
|
|
|
if (sscanf(desc, "%d %d", &cmd_current_unlimited, &cmd_discharging) ==
|
|
2) {
|
|
set_usb_current_unlimited(cmd_current_unlimited);
|
|
if (cmd_discharging == 1) {
|
|
charging_enable = false;
|
|
adjust_power = -1;
|
|
} else if (cmd_discharging == 0) {
|
|
charging_enable = true;
|
|
adjust_power = -1;
|
|
}
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"[%s] cmd_current_unlimited=%d, cmd_discharging=%d\n",
|
|
__func__, cmd_current_unlimited, cmd_discharging);
|
|
return count;
|
|
} /*else { */
|
|
battery_log(BAT_LOG_CRTI,
|
|
" bad argument, echo [enable] > current_cmd\n");
|
|
/*} */
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int current_cmd_read(struct seq_file *m, void *v)
|
|
{
|
|
unsigned int charging_enable = false;
|
|
|
|
cmd_discharging = 1;
|
|
charging_enable = false;
|
|
adjust_power = -1;
|
|
|
|
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
|
|
|
|
battery_log(BAT_LOG_CRTI, "[current_cmd_write] cmd_discharging=%d\n",
|
|
cmd_discharging);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int proc_utilization_open_cur_stop(struct inode *inode,
|
|
struct file *file)
|
|
{
|
|
return single_open(file, current_cmd_read, NULL);
|
|
}
|
|
|
|
static ssize_t discharging_cmd_write(struct file *file, const char *buffer,
|
|
size_t count, loff_t *data)
|
|
{
|
|
int len = 0;
|
|
char desc[32];
|
|
unsigned int charging_enable = false;
|
|
|
|
len = (count < (sizeof(desc) - 1)) ? count : (sizeof(desc) - 1);
|
|
if (copy_from_user(desc, buffer, len))
|
|
return 0;
|
|
|
|
desc[len] = '\0';
|
|
|
|
if (sscanf(desc, "%d %d", &charging_enable, &adjust_power) == 2) {
|
|
battery_log(BAT_LOG_CRTI,
|
|
"[current_cmd_write] adjust_power = %d\n",
|
|
adjust_power);
|
|
return count;
|
|
} /*else { */
|
|
battery_log(BAT_LOG_CRTI,
|
|
" bad argument, echo [enable] > current_cmd\n");
|
|
/*} */
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct file_operations discharging_cmd_proc_fops = {
|
|
.open = proc_utilization_open,
|
|
.read = seq_read,
|
|
.write = discharging_cmd_write,
|
|
};
|
|
|
|
static const struct file_operations current_cmd_proc_fops = {
|
|
.open = proc_utilization_open_cur_stop,
|
|
.read = seq_read,
|
|
.write = current_cmd_write,
|
|
};
|
|
|
|
static int mt_batteryNotify_probe(struct platform_device *dev)
|
|
{
|
|
int ret_device_file = 0;
|
|
/* struct proc_dir_entry *entry = NULL; */
|
|
struct proc_dir_entry *battery_dir = NULL;
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"******** %s!! ********\n", __func__);
|
|
|
|
ret_device_file =
|
|
device_create_file(&(dev->dev), &dev_attr_BatteryNotify);
|
|
ret_device_file =
|
|
device_create_file(&(dev->dev), &dev_attr_BN_TestMode);
|
|
|
|
battery_dir = proc_mkdir("mtk_battery_cmd", NULL);
|
|
if (!battery_dir) {
|
|
pr_info("[%s]:mkdir /proc/mtk_battery_cmd failed\n", __func__);
|
|
} else {
|
|
#if 1
|
|
proc_create("battery_cmd", 0644, battery_dir,
|
|
&battery_cmd_proc_fops);
|
|
battery_log(BAT_LOG_CRTI,
|
|
"proc_create battery_cmd_proc_fops\n");
|
|
|
|
proc_create("current_cmd", 0644, battery_dir,
|
|
¤t_cmd_proc_fops);
|
|
battery_log(BAT_LOG_CRTI,
|
|
"proc_create current_cmd_proc_fops\n");
|
|
|
|
proc_create("discharging_cmd", 0644, battery_dir,
|
|
&discharging_cmd_proc_fops);
|
|
battery_log(BAT_LOG_CRTI,
|
|
"proc_create discharging_cmd_proc_fops\n");
|
|
|
|
#else
|
|
entry = create_proc_entry("battery_cmd", 0644, battery_dir);
|
|
if (entry) {
|
|
entry->read_proc = battery_cmd_read;
|
|
entry->write_proc = battery_cmd_write;
|
|
}
|
|
#endif
|
|
}
|
|
battery_log(BAT_LOG_CRTI, "******** mtk_battery_cmd!! ********\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id mt_battery_of_match[] = {
|
|
{
|
|
.compatible = "mediatek,battery",
|
|
},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mt_battery_of_match);
|
|
#endif
|
|
|
|
static int battery_pm_suspend(struct device *device)
|
|
{
|
|
int ret = 0;
|
|
|
|
struct platform_device *pdev = to_platform_device(device);
|
|
|
|
WARN_ON(pdev == NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int battery_pm_resume(struct device *device)
|
|
{
|
|
int ret = 0;
|
|
|
|
struct platform_device *pdev = to_platform_device(device);
|
|
|
|
WARN_ON(pdev == NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int battery_pm_freeze(struct device *device)
|
|
{
|
|
int ret = 0;
|
|
|
|
struct platform_device *pdev = to_platform_device(device);
|
|
|
|
WARN_ON(pdev == NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int battery_pm_restore(struct device *device)
|
|
{
|
|
int ret = 0;
|
|
|
|
struct platform_device *pdev = to_platform_device(device);
|
|
|
|
WARN_ON(pdev == NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int battery_pm_restore_noirq(struct device *device)
|
|
{
|
|
int ret = 0;
|
|
|
|
struct platform_device *pdev = to_platform_device(device);
|
|
|
|
WARN_ON(pdev == NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
const struct dev_pm_ops battery_pm_ops = {
|
|
.suspend = battery_pm_suspend,
|
|
.resume = battery_pm_resume,
|
|
.freeze = battery_pm_freeze,
|
|
.thaw = battery_pm_restore,
|
|
.restore = battery_pm_restore,
|
|
.restore_noirq = battery_pm_restore_noirq,
|
|
};
|
|
|
|
#if defined(CONFIG_OF) || defined(BATTERY_MODULE_INIT)
|
|
struct platform_device battery_device = {
|
|
.name = "battery", .id = -1,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver battery_driver = {
|
|
.probe = battery_probe,
|
|
.remove = battery_remove,
|
|
.shutdown = battery_shutdown,
|
|
.driver = {
|
|
|
|
|
|
.name = "battery", .pm = &battery_pm_ops,
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static int battery_dts_probe(struct platform_device *dev)
|
|
{
|
|
int ret = 0;
|
|
|
|
battery_log(BAT_LOG_CRTI, "******** %s!! ********\n", __func__);
|
|
|
|
chrdet_irq = platform_get_irq(dev, 0);
|
|
if (chrdet_irq <= 0)
|
|
pr_notice("******** don't support irq from dts ********\n");
|
|
else {
|
|
ret = request_threaded_irq(chrdet_irq, NULL,
|
|
ops_chrdet_int_handler,
|
|
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
|
|
"ops_pmic_chrdet", dev);
|
|
if (ret) {
|
|
pr_notice("%s: request_threaded_irq err = %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
irq_set_irq_wake(chrdet_irq, 1);
|
|
}
|
|
|
|
battery_device.dev.of_node = dev->dev.of_node;
|
|
ret = platform_device_register(&battery_device);
|
|
if (ret) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"***[%s] Unable to register device (%d)\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver battery_dts_driver = {
|
|
.probe = battery_dts_probe,
|
|
.remove = NULL,
|
|
.shutdown = NULL,
|
|
.driver = {
|
|
|
|
|
|
.name = "battery-dts",
|
|
#ifdef CONFIG_OF
|
|
.of_match_table = mt_battery_of_match,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
/* -------------------------------------------------------- */
|
|
|
|
static const struct of_device_id mt_bat_notify_of_match[] = {
|
|
{
|
|
.compatible = "mediatek,bat_notify",
|
|
},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mt_bat_notify_of_match);
|
|
#endif
|
|
|
|
struct platform_device MT_batteryNotify_device = {
|
|
.name = "mt-battery", .id = -1,
|
|
};
|
|
|
|
static struct platform_driver mt_batteryNotify_driver = {
|
|
.probe = mt_batteryNotify_probe,
|
|
.driver = {
|
|
|
|
|
|
.name = "mt-battery",
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static int mt_batteryNotify_dts_probe(struct platform_device *dev)
|
|
{
|
|
int ret = 0;
|
|
/* struct proc_dir_entry *entry = NULL; */
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"******** %s!! ********\n", __func__);
|
|
|
|
MT_batteryNotify_device.dev.of_node = dev->dev.of_node;
|
|
ret = platform_device_register(&MT_batteryNotify_device);
|
|
if (ret) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"%s] Unable to register device (%d)\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mt_batteryNotify_dts_driver = {
|
|
.probe = mt_batteryNotify_dts_probe,
|
|
.driver = {
|
|
|
|
|
|
.name = "mt-dts-battery",
|
|
#ifdef CONFIG_OF
|
|
.of_match_table = mt_bat_notify_of_match,
|
|
#endif
|
|
},
|
|
};
|
|
#endif
|
|
/* -------------------------------------------------------- */
|
|
|
|
static int battery_pm_event(struct notifier_block *notifier,
|
|
unsigned long pm_event, void *unused)
|
|
{
|
|
switch (pm_event) {
|
|
case PM_HIBERNATION_PREPARE: /* Going to hibernate */
|
|
case PM_RESTORE_PREPARE: /* Going to restore a saved image */
|
|
case PM_SUSPEND_PREPARE: /* Going to suspend the system */
|
|
battery_log(BAT_LOG_FULL, "[%s] pm_event %lu\n", __func__,
|
|
pm_event);
|
|
battery_timer_pause();
|
|
return NOTIFY_DONE;
|
|
case PM_POST_HIBERNATION: /* Hibernation finished */
|
|
case PM_POST_SUSPEND: /* Suspend finished */
|
|
case PM_POST_RESTORE: /* Restore failed */
|
|
battery_log(BAT_LOG_FULL, "[%s] pm_event %lu\n", __func__,
|
|
pm_event);
|
|
battery_timer_resume();
|
|
return NOTIFY_DONE;
|
|
}
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block battery_pm_notifier_block = {
|
|
.notifier_call = battery_pm_event, .priority = 0,
|
|
};
|
|
|
|
static int __init battery_init(void)
|
|
{
|
|
int ret;
|
|
|
|
pr_info("%s\n", __func__);
|
|
|
|
#ifdef CONFIG_OF
|
|
/* */
|
|
#else
|
|
|
|
#ifdef BATTERY_MODULE_INIT
|
|
ret = platform_device_register(&battery_device);
|
|
if (ret) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"****[battery_device] Unable to device register(%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
ret = platform_driver_register(&battery_driver);
|
|
if (ret) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"****[battery_driver] Unable to register driver (%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
/* battery notofy UI */
|
|
#ifdef CONFIG_OF
|
|
/* */
|
|
#else
|
|
ret = platform_device_register(&MT_batteryNotify_device);
|
|
if (ret) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"****[mt_batteryNotify] Unable to device register(%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
ret = platform_driver_register(&mt_batteryNotify_driver);
|
|
if (ret) {
|
|
battery_log(
|
|
BAT_LOG_CRTI,
|
|
"****[mt_batteryNotify] Unable to register driver (%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
#ifdef CONFIG_OF
|
|
ret = platform_driver_register(&battery_dts_driver);
|
|
ret = platform_driver_register(&mt_batteryNotify_dts_driver);
|
|
#endif
|
|
ret = register_pm_notifier(&battery_pm_notifier_block);
|
|
if (ret)
|
|
pr_info("[%s] failed to register PM notifier %d\n", __func__,
|
|
ret);
|
|
|
|
battery_log(BAT_LOG_CRTI,
|
|
"****[battery_driver] Initialization : DONE !!\n");
|
|
return 0;
|
|
}
|
|
|
|
#ifdef BATTERY_MODULE_INIT
|
|
late_initcall(battery_init);
|
|
#else
|
|
static void __exit battery_exit(void)
|
|
{
|
|
}
|
|
late_initcall(battery_init);
|
|
|
|
#endif
|
|
|
|
MODULE_AUTHOR("Oscar Liu");
|
|
MODULE_DESCRIPTION("Battery Device Driver");
|
|
MODULE_LICENSE("GPL");
|