kernel_samsung_a34x-permissive/tools/testing/selftests/bpf/test_tunnel.sh
2024-04-28 15:49:01 +02:00

732 lines
18 KiB
Bash
Executable file

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# End-to-end eBPF tunnel test suite
# The script tests BPF network tunnel implementation.
#
# Topology:
# ---------
# root namespace | at_ns0 namespace
# |
# ----------- | -----------
# | tnl dev | | | tnl dev | (overlay network)
# ----------- | -----------
# metadata-mode | native-mode
# with bpf |
# |
# ---------- | ----------
# | veth1 | --------- | veth0 | (underlay network)
# ---------- peer ----------
#
#
# Device Configuration
# --------------------
# Root namespace with metadata-mode tunnel + BPF
# Device names and addresses:
# veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
# tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200 (overlay)
#
# Namespace at_ns0 with native tunnel
# Device names and addresses:
# veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
# tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100 (overlay)
#
#
# End-to-end ping packet flow
# ---------------------------
# Most of the tests start by namespace creation, device configuration,
# then ping the underlay and overlay network. When doing 'ping 10.1.1.100'
# from root namespace, the following operations happen:
# 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev.
# 2) Tnl device's egress BPF program is triggered and set the tunnel metadata,
# with remote_ip=172.16.1.200 and others.
# 3) Outer tunnel header is prepended and route the packet to veth1's egress
# 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0
# 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
# 6) Forward the packet to the overlay tnl dev
PING_ARG="-c 3 -w 10 -q"
ret=0
GREEN='\033[0;92m'
RED='\033[0;31m'
NC='\033[0m' # No Color
config_device()
{
ip netns add at_ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns at_ns0
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip link set dev veth1 up mtu 1500
ip addr add dev veth1 172.16.1.200/24
}
add_gre_tunnel()
{
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE seq key 2 \
local 172.16.1.100 remote 172.16.1.200
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
# root namespace
ip link add dev $DEV type $TYPE key 2 external
ip link set dev $DEV up
ip addr add dev $DEV 10.1.1.200/24
}
add_ip6gretap_tunnel()
{
# assign ipv6 address
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \
local ::11 remote ::22
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96
ip netns exec at_ns0 ip link set dev $DEV_NS up
# root namespace
ip link add dev $DEV type $TYPE external
ip addr add dev $DEV 10.1.1.200/24
ip addr add dev $DEV fc80::200/24
ip link set dev $DEV up
}
add_erspan_tunnel()
{
# at_ns0 namespace
if [ "$1" == "v1" ]; then
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE seq key 2 \
local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 1 erspan 123
else
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE seq key 2 \
local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 2 erspan_dir egress erspan_hwid 3
fi
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
# root namespace
ip link add dev $DEV type $TYPE external
ip link set dev $DEV up
ip addr add dev $DEV 10.1.1.200/24
}
add_ip6erspan_tunnel()
{
# assign ipv6 address
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up
# at_ns0 namespace
if [ "$1" == "v1" ]; then
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE seq key 2 \
local ::11 remote ::22 \
erspan_ver 1 erspan 123
else
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE seq key 2 \
local ::11 remote ::22 \
erspan_ver 2 erspan_dir egress erspan_hwid 7
fi
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns0 ip link set dev $DEV_NS up
# root namespace
ip link add dev $DEV type $TYPE external
ip addr add dev $DEV 10.1.1.200/24
ip link set dev $DEV up
}
add_vxlan_tunnel()
{
# Set static ARP entry here because iptables set-mark works
# on L3 packet, as a result not applying to ARP packets,
# causing errors at get_tunnel_{key/opt}.
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE \
id 2 dstport 4789 gbp remote 172.16.1.200
ip netns exec at_ns0 \
ip link set dev $DEV_NS address 52:54:00:d9:01:00 up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00
ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF
# root namespace
ip link add dev $DEV type $TYPE external gbp dstport 4789
ip link set dev $DEV address 52:54:00:d9:02:00 up
ip addr add dev $DEV 10.1.1.200/24
arp -s 10.1.1.100 52:54:00:d9:01:00
}
add_ip6vxlan_tunnel()
{
#ip netns exec at_ns0 ip -4 addr del 172.16.1.100 dev veth0
ip netns exec at_ns0 ip -6 addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
#ip -4 addr del 172.16.1.200 dev veth1
ip -6 addr add dev veth1 ::22/96
ip link set dev veth1 up
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE id 22 dstport 4789 \
local ::11 remote ::22
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns0 ip link set dev $DEV_NS up
# root namespace
ip link add dev $DEV type $TYPE external dstport 4789
ip addr add dev $DEV 10.1.1.200/24
ip link set dev $DEV up
}
add_geneve_tunnel()
{
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE \
id 2 dstport 6081 remote 172.16.1.200
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
# root namespace
ip link add dev $DEV type $TYPE dstport 6081 external
ip link set dev $DEV up
ip addr add dev $DEV 10.1.1.200/24
}
add_ip6geneve_tunnel()
{
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE id 22 \
remote ::22 # geneve has no local option
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns0 ip link set dev $DEV_NS up
# root namespace
ip link add dev $DEV type $TYPE external
ip addr add dev $DEV 10.1.1.200/24
ip link set dev $DEV up
}
add_ipip_tunnel()
{
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE \
local 172.16.1.100 remote 172.16.1.200
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
# root namespace
ip link add dev $DEV type $TYPE external
ip link set dev $DEV up
ip addr add dev $DEV 10.1.1.200/24
}
add_ipip6tnl_tunnel()
{
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up
# at_ns0 namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE \
local ::11 remote ::22
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns0 ip link set dev $DEV_NS up
# root namespace
ip link add dev $DEV type $TYPE external
ip addr add dev $DEV 10.1.1.200/24
ip link set dev $DEV up
}
test_gre()
{
TYPE=gretap
DEV_NS=gretap00
DEV=gretap11
ret=0
check $TYPE
config_device
add_gre_tunnel
attach_bpf $DEV gre_set_tunnel gre_get_tunnel
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_ip6gre()
{
TYPE=ip6gre
DEV_NS=ip6gre00
DEV=ip6gre11
ret=0
check $TYPE
config_device
# reuse the ip6gretap function
add_ip6gretap_tunnel
attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
# underlay
ping6 $PING_ARG ::11
# overlay: ipv4 over ipv6
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
ping $PING_ARG 10.1.1.100
check_err $?
# overlay: ipv6 over ipv6
ip netns exec at_ns0 ping6 $PING_ARG fc80::200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_ip6gretap()
{
TYPE=ip6gretap
DEV_NS=ip6gretap00
DEV=ip6gretap11
ret=0
check $TYPE
config_device
add_ip6gretap_tunnel
attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
# underlay
ping6 $PING_ARG ::11
# overlay: ipv4 over ipv6
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
ping $PING_ARG 10.1.1.100
check_err $?
# overlay: ipv6 over ipv6
ip netns exec at_ns0 ping6 $PING_ARG fc80::200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_erspan()
{
TYPE=erspan
DEV_NS=erspan00
DEV=erspan11
ret=0
check $TYPE
config_device
add_erspan_tunnel $1
attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_ip6erspan()
{
TYPE=ip6erspan
DEV_NS=ip6erspan00
DEV=ip6erspan11
ret=0
check $TYPE
config_device
add_ip6erspan_tunnel $1
attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel
ping6 $PING_ARG ::11
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_vxlan()
{
TYPE=vxlan
DEV_NS=vxlan00
DEV=vxlan11
ret=0
check $TYPE
config_device
add_vxlan_tunnel
attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_ip6vxlan()
{
TYPE=vxlan
DEV_NS=ip6vxlan00
DEV=ip6vxlan11
ret=0
check $TYPE
config_device
add_ip6vxlan_tunnel
ip link set dev veth1 mtu 1500
attach_bpf $DEV ip6vxlan_set_tunnel ip6vxlan_get_tunnel
# underlay
ping6 $PING_ARG ::11
# ip4 over ip6
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: ip6$TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
}
test_geneve()
{
TYPE=geneve
DEV_NS=geneve00
DEV=geneve11
ret=0
check $TYPE
config_device
add_geneve_tunnel
attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_ip6geneve()
{
TYPE=geneve
DEV_NS=ip6geneve00
DEV=ip6geneve11
ret=0
check $TYPE
config_device
add_ip6geneve_tunnel
attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: ip6$TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
}
test_ipip()
{
TYPE=ipip
DEV_NS=ipip00
DEV=ipip11
ret=0
check $TYPE
config_device
add_ipip_tunnel
ip link set dev veth1 mtu 1500
attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
test_ipip6()
{
TYPE=ip6tnl
DEV_NS=ipip6tnl00
DEV=ipip6tnl11
ret=0
check $TYPE
config_device
add_ipip6tnl_tunnel
ip link set dev veth1 mtu 1500
attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel
# underlay
ping6 $PING_ARG ::11
# ip4 over ip6
ping $PING_ARG 10.1.1.100
check_err $?
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: $TYPE"${NC}
return 1
fi
echo -e ${GREEN}"PASS: $TYPE"${NC}
}
setup_xfrm_tunnel()
{
auth=0x$(printf '1%.0s' {1..40})
enc=0x$(printf '2%.0s' {1..32})
spi_in_to_out=0x1
spi_out_to_in=0x2
# at_ns0 namespace
# at_ns0 -> root
ip netns exec at_ns0 \
ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
spi $spi_in_to_out reqid 1 mode tunnel \
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
ip netns exec at_ns0 \
ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \
tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
mode tunnel
# root -> at_ns0
ip netns exec at_ns0 \
ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
spi $spi_out_to_in reqid 2 mode tunnel \
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
ip netns exec at_ns0 \
ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \
tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
mode tunnel
# address & route
ip netns exec at_ns0 \
ip addr add dev veth0 10.1.1.100/32
ip netns exec at_ns0 \
ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \
src 10.1.1.100
# root namespace
# at_ns0 -> root
ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
spi $spi_in_to_out reqid 1 mode tunnel \
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \
tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
mode tunnel
# root -> at_ns0
ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
spi $spi_out_to_in reqid 2 mode tunnel \
auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \
tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
mode tunnel
# address & route
ip addr add dev veth1 10.1.1.200/32
ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200
}
test_xfrm_tunnel()
{
config_device
> /sys/kernel/debug/tracing/trace
setup_xfrm_tunnel
tc qdisc add dev veth1 clsact
tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \
sec xfrm_get_state
ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
sleep 1
grep "reqid 1" /sys/kernel/debug/tracing/trace
check_err $?
grep "spi 0x1" /sys/kernel/debug/tracing/trace
check_err $?
grep "remote ip 0xac100164" /sys/kernel/debug/tracing/trace
check_err $?
cleanup
if [ $ret -ne 0 ]; then
echo -e ${RED}"FAIL: xfrm tunnel"${NC}
return 1
fi
echo -e ${GREEN}"PASS: xfrm tunnel"${NC}
}
attach_bpf()
{
DEV=$1
SET=$2
GET=$3
tc qdisc add dev $DEV clsact
tc filter add dev $DEV egress bpf da obj test_tunnel_kern.o sec $SET
tc filter add dev $DEV ingress bpf da obj test_tunnel_kern.o sec $GET
}
cleanup()
{
ip netns delete at_ns0 2> /dev/null
ip link del veth1 2> /dev/null
ip link del ipip11 2> /dev/null
ip link del ipip6tnl11 2> /dev/null
ip link del gretap11 2> /dev/null
ip link del ip6gre11 2> /dev/null
ip link del ip6gretap11 2> /dev/null
ip link del vxlan11 2> /dev/null
ip link del ip6vxlan11 2> /dev/null
ip link del geneve11 2> /dev/null
ip link del ip6geneve11 2> /dev/null
ip link del erspan11 2> /dev/null
ip link del ip6erspan11 2> /dev/null
ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null
ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null
ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null
ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null
}
cleanup_exit()
{
echo "CATCH SIGKILL or SIGINT, cleanup and exit"
cleanup
exit 0
}
check()
{
ip link help 2>&1 | grep -q "\s$1\s"
if [ $? -ne 0 ];then
echo "SKIP $1: iproute2 not support"
cleanup
return 1
fi
}
enable_debug()
{
echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
echo 'file vxlan.c +p' > /sys/kernel/debug/dynamic_debug/control
echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control
echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control
}
check_err()
{
if [ $ret -eq 0 ]; then
ret=$1
fi
}
bpf_tunnel_test()
{
echo "Testing GRE tunnel..."
test_gre
echo "Testing IP6GRE tunnel..."
test_ip6gre
echo "Testing IP6GRETAP tunnel..."
test_ip6gretap
echo "Testing ERSPAN tunnel..."
test_erspan v2
echo "Testing IP6ERSPAN tunnel..."
test_ip6erspan v2
echo "Testing VXLAN tunnel..."
test_vxlan
echo "Testing IP6VXLAN tunnel..."
test_ip6vxlan
echo "Testing GENEVE tunnel..."
test_geneve
echo "Testing IP6GENEVE tunnel..."
test_ip6geneve
echo "Testing IPIP tunnel..."
test_ipip
echo "Testing IPIP6 tunnel..."
test_ipip6
echo "Testing IPSec tunnel..."
test_xfrm_tunnel
}
trap cleanup 0 3 6
trap cleanup_exit 2 9
cleanup
bpf_tunnel_test
exit 0