122 lines
3.9 KiB
Plaintext
122 lines
3.9 KiB
Plaintext
LVDS Display Panel
|
|
==================
|
|
|
|
LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
|
|
incompatible data link layers have been used over time to transmit image data
|
|
to LVDS panels. This bindings supports display panels compatible with the
|
|
following specifications.
|
|
|
|
[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
|
|
1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
|
|
[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
|
|
Semiconductor
|
|
[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
|
|
Electronics Standards Association (VESA)
|
|
|
|
Device compatible with those specifications have been marketed under the
|
|
FPD-Link and FlatLink brands.
|
|
|
|
|
|
Required properties:
|
|
|
|
- compatible: Shall contain "panel-lvds" in addition to a mandatory
|
|
panel-specific compatible string defined in individual panel bindings. The
|
|
"panel-lvds" value shall never be used on its own.
|
|
- width-mm: See panel-common.txt.
|
|
- height-mm: See panel-common.txt.
|
|
- data-mapping: The color signals mapping order, "jeida-18", "jeida-24"
|
|
or "vesa-24".
|
|
|
|
Optional properties:
|
|
|
|
- label: See panel-common.txt.
|
|
- gpios: See panel-common.txt.
|
|
- backlight: See panel-common.txt.
|
|
- power-supply: See panel-common.txt.
|
|
- data-mirror: If set, reverse the bit order described in the data mappings
|
|
below on all data lanes, transmitting bits for slots 6 to 0 instead of
|
|
0 to 6.
|
|
|
|
Required nodes:
|
|
|
|
- panel-timing: See panel-common.txt.
|
|
- ports: See panel-common.txt. These bindings require a single port subnode
|
|
corresponding to the panel LVDS input.
|
|
|
|
|
|
LVDS data mappings are defined as follows.
|
|
|
|
- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
|
|
[VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
|
|
|
|
Slot 0 1 2 3 4 5 6
|
|
________________ _________________
|
|
Clock \_______________________/
|
|
______ ______ ______ ______ ______ ______ ______
|
|
DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
|
|
DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
|
|
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
|
|
|
|
- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
|
|
specifications. Data are transferred as follows on 4 LVDS lanes.
|
|
|
|
Slot 0 1 2 3 4 5 6
|
|
________________ _________________
|
|
Clock \_______________________/
|
|
______ ______ ______ ______ ______ ______ ______
|
|
DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
|
|
DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
|
|
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
|
|
DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
|
|
|
|
- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
|
|
Data are transferred as follows on 4 LVDS lanes.
|
|
|
|
Slot 0 1 2 3 4 5 6
|
|
________________ _________________
|
|
Clock \_______________________/
|
|
______ ______ ______ ______ ______ ______ ______
|
|
DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
|
|
DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
|
|
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
|
|
DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
|
|
|
|
Control signals are mapped as follows.
|
|
|
|
CTL0: HSync
|
|
CTL1: VSync
|
|
CTL2: Data Enable
|
|
CTL3: 0
|
|
|
|
|
|
Example
|
|
-------
|
|
|
|
panel {
|
|
compatible = "mitsubishi,aa121td01", "panel-lvds";
|
|
|
|
width-mm = <261>;
|
|
height-mm = <163>;
|
|
|
|
data-mapping = "jeida-24";
|
|
|
|
panel-timing {
|
|
/* 1280x800 @60Hz */
|
|
clock-frequency = <71000000>;
|
|
hactive = <1280>;
|
|
vactive = <800>;
|
|
hsync-len = <70>;
|
|
hfront-porch = <20>;
|
|
hback-porch = <70>;
|
|
vsync-len = <5>;
|
|
vfront-porch = <3>;
|
|
vback-porch = <15>;
|
|
};
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&lvds_encoder>;
|
|
};
|
|
};
|
|
};
|