38 lines
1.4 KiB
Plaintext
38 lines
1.4 KiB
Plaintext
* Amlogic Meson SAR (Successive Approximation Register) A/D converter
|
|
|
|
Required properties:
|
|
- compatible: depending on the SoC this should be one of:
|
|
- "amlogic,meson8-saradc" for Meson8
|
|
- "amlogic,meson8b-saradc" for Meson8b
|
|
- "amlogic,meson8m2-saradc" for Meson8m2
|
|
- "amlogic,meson-gxbb-saradc" for GXBB
|
|
- "amlogic,meson-gxl-saradc" for GXL
|
|
- "amlogic,meson-gxm-saradc" for GXM
|
|
- "amlogic,meson-axg-saradc" for AXG
|
|
along with the generic "amlogic,meson-saradc"
|
|
- reg: the physical base address and length of the registers
|
|
- interrupts: the interrupt indicating end of sampling
|
|
- clocks: phandle and clock identifier (see clock-names)
|
|
- clock-names: mandatory clocks:
|
|
- "clkin" for the reference clock (typically XTAL)
|
|
- "core" for the SAR ADC core clock
|
|
optional clocks:
|
|
- "adc_clk" for the ADC (sampling) clock
|
|
- "adc_sel" for the ADC (sampling) clock mux
|
|
- vref-supply: the regulator supply for the ADC reference voltage
|
|
- #io-channel-cells: must be 1, see ../iio-bindings.txt
|
|
|
|
Example:
|
|
saradc: adc@8680 {
|
|
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0x0 0x8680 0x0 0x34>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&xtal>,
|
|
<&clkc CLKID_SAR_ADC>,
|
|
<&clkc CLKID_SANA>,
|
|
<&clkc CLKID_SAR_ADC_CLK>,
|
|
<&clkc CLKID_SAR_ADC_SEL>;
|
|
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
|
|
};
|