29 lines
970 B
Plaintext
29 lines
970 B
Plaintext
* Devantech SRF04 ultrasonic range finder
|
|
Bit-banging driver using two GPIOs
|
|
|
|
Required properties:
|
|
- compatible: Should be "devantech,srf04"
|
|
|
|
- trig-gpios: Definition of the GPIO for the triggering (output)
|
|
This GPIO is set for about 10 us by the driver to tell the
|
|
device it should initiate the measurement cycle.
|
|
|
|
- echo-gpios: Definition of the GPIO for the echo (input)
|
|
This GPIO is set by the device as soon as an ultrasonic
|
|
burst is sent out and reset when the first echo is
|
|
received.
|
|
Thus this GPIO is set while the ultrasonic waves are doing
|
|
one round trip.
|
|
It needs to be an GPIO which is able to deliver an
|
|
interrupt because the time between two interrupts is
|
|
measured in the driver.
|
|
See Documentation/devicetree/bindings/gpio/gpio.txt for
|
|
information on how to specify a consumer gpio.
|
|
|
|
Example:
|
|
srf04@0 {
|
|
compatible = "devantech,srf04";
|
|
trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
|
echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
|
|
};
|