103 lines
3.1 KiB
Plaintext
103 lines
3.1 KiB
Plaintext
Cirrus Logic Madera class audio codecs Multi-Functional Device
|
|
|
|
These devices are audio SoCs with extensive digital capabilities and a range
|
|
of analogue I/O.
|
|
|
|
See also the child driver bindings in:
|
|
bindings/pinctrl/cirrus,madera-pinctrl.txt
|
|
bindings/regulator/arizona-regulator.txt
|
|
bindings/sound/madera.txt
|
|
|
|
Required properties:
|
|
|
|
- compatible : One of the following chip-specific strings:
|
|
"cirrus,cs47l35"
|
|
"cirrus,cs47l85"
|
|
"cirrus,cs47l90"
|
|
"cirrus,cs47l91"
|
|
"cirrus,wm1840"
|
|
|
|
- reg : I2C slave address when connected using I2C, chip select number when
|
|
using SPI.
|
|
|
|
- DCVDD-supply : Power supply for the device as defined in
|
|
bindings/regulator/regulator.txt
|
|
Mandatory on CS47L35, CS47L90, CS47L91
|
|
Optional on CS47L85, WM1840
|
|
|
|
- AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
|
|
Power supplies for the device
|
|
|
|
- DBVDD3-supply, DBVDD4-supply : Power supplies for the device
|
|
(CS47L85, CS47L90, CS47L91, WM1840)
|
|
|
|
- SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
|
|
(CS47L85, WM1840)
|
|
|
|
- SPKVDD-supply : Power supply for the device
|
|
(CS47L35)
|
|
|
|
- interrupt-controller : Indicates that this device is an interrupt controller
|
|
|
|
- #interrupt-cells: the number of cells to describe an IRQ, must be 2.
|
|
The first cell is the IRQ number.
|
|
The second cell is the flags, encoded as the trigger masks from
|
|
bindings/interrupt-controller/interrupts.txt
|
|
|
|
- gpio-controller : Indicates this device is a GPIO controller.
|
|
|
|
- #gpio-cells : Must be 2. The first cell is the pin number. The second cell
|
|
is reserved for future use and must be zero
|
|
|
|
- interrupt-parent : The parent interrupt controller.
|
|
|
|
- interrupts : The interrupt line the /IRQ signal for the device is
|
|
connected to.
|
|
|
|
Optional properties:
|
|
|
|
- MICVDD-supply : Power supply, only need to be specified if
|
|
powered externally
|
|
|
|
- reset-gpios : One entry specifying the GPIO controlling /RESET.
|
|
As defined in bindings/gpio.txt.
|
|
Although optional, it is strongly recommended to use a hardware reset
|
|
|
|
- MICBIASx : Initial data for the MICBIAS regulators, as covered in
|
|
Documentation/devicetree/bindings/regulator/regulator.txt.
|
|
One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
|
|
(all codecs)
|
|
|
|
One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
|
|
(all except CS47L85, WM1840)
|
|
|
|
The following following additional property is supported for the generator
|
|
nodes:
|
|
- cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
|
|
capacitors attached.
|
|
|
|
Optional child nodes:
|
|
micvdd : Node containing initialization data for the micvdd regulator
|
|
See bindings/regulator/arizona-regulator.txt
|
|
|
|
ldo1 : Node containing initialization data for the LDO1 regulator
|
|
See bindings/regulator/arizona-regulator.txt
|
|
(cs47l85, wm1840)
|
|
|
|
Example:
|
|
|
|
cs47l85@0 {
|
|
compatible = "cirrus,cs47l85";
|
|
reg = <0>;
|
|
|
|
reset-gpios = <&gpio 0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <&host_irq1>;
|
|
interrupt-parent = <&gic>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|