6db4831e98
Android 14
1704 lines
44 KiB
C
1704 lines
44 KiB
C
/* Altera Triple-Speed Ethernet MAC driver
|
|
* Copyright (C) 2008-2014 Altera Corporation. All rights reserved
|
|
*
|
|
* Contributors:
|
|
* Dalon Westergreen
|
|
* Thomas Chou
|
|
* Ian Abbott
|
|
* Yuriy Kozlov
|
|
* Tobias Klauser
|
|
* Andriy Smolskyy
|
|
* Roman Bulgakov
|
|
* Dmytro Mytarchuk
|
|
* Matthew Gerlach
|
|
*
|
|
* Original driver contributed by SLS.
|
|
* Major updates contributed by GlobalLogic
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/atomic.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/skbuff.h>
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include "altera_utils.h"
|
|
#include "altera_tse.h"
|
|
#include "altera_sgdma.h"
|
|
#include "altera_msgdma.h"
|
|
|
|
static atomic_t instance_count = ATOMIC_INIT(~0);
|
|
/* Module parameters */
|
|
static int debug = -1;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
|
|
|
|
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
|
|
NETIF_MSG_LINK | NETIF_MSG_IFUP |
|
|
NETIF_MSG_IFDOWN);
|
|
|
|
#define RX_DESCRIPTORS 64
|
|
static int dma_rx_num = RX_DESCRIPTORS;
|
|
module_param(dma_rx_num, int, 0644);
|
|
MODULE_PARM_DESC(dma_rx_num, "Number of descriptors in the RX list");
|
|
|
|
#define TX_DESCRIPTORS 64
|
|
static int dma_tx_num = TX_DESCRIPTORS;
|
|
module_param(dma_tx_num, int, 0644);
|
|
MODULE_PARM_DESC(dma_tx_num, "Number of descriptors in the TX list");
|
|
|
|
|
|
#define POLL_PHY (-1)
|
|
|
|
/* Make sure DMA buffer size is larger than the max frame size
|
|
* plus some alignment offset and a VLAN header. If the max frame size is
|
|
* 1518, a VLAN header would be additional 4 bytes and additional
|
|
* headroom for alignment is 2 bytes, 2048 is just fine.
|
|
*/
|
|
#define ALTERA_RXDMABUFFER_SIZE 2048
|
|
|
|
/* Allow network stack to resume queueing packets after we've
|
|
* finished transmitting at least 1/4 of the packets in the queue.
|
|
*/
|
|
#define TSE_TX_THRESH(x) (x->tx_ring_size / 4)
|
|
|
|
#define TXQUEUESTOP_THRESHHOLD 2
|
|
|
|
static const struct of_device_id altera_tse_ids[];
|
|
|
|
static inline u32 tse_tx_avail(struct altera_tse_private *priv)
|
|
{
|
|
return priv->tx_cons + priv->tx_ring_size - priv->tx_prod - 1;
|
|
}
|
|
|
|
/* PCS Register read/write functions
|
|
*/
|
|
static u16 sgmii_pcs_read(struct altera_tse_private *priv, int regnum)
|
|
{
|
|
return csrrd32(priv->mac_dev,
|
|
tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff;
|
|
}
|
|
|
|
static void sgmii_pcs_write(struct altera_tse_private *priv, int regnum,
|
|
u16 value)
|
|
{
|
|
csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4);
|
|
}
|
|
|
|
/* Check PCS scratch memory */
|
|
static int sgmii_pcs_scratch_test(struct altera_tse_private *priv, u16 value)
|
|
{
|
|
sgmii_pcs_write(priv, SGMII_PCS_SCRATCH, value);
|
|
return (sgmii_pcs_read(priv, SGMII_PCS_SCRATCH) == value);
|
|
}
|
|
|
|
/* MDIO specific functions
|
|
*/
|
|
static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct altera_tse_private *priv = netdev_priv(ndev);
|
|
|
|
/* set MDIO address */
|
|
csrwr32((mii_id & 0x1f), priv->mac_dev,
|
|
tse_csroffs(mdio_phy1_addr));
|
|
|
|
/* get the data */
|
|
return csrrd32(priv->mac_dev,
|
|
tse_csroffs(mdio_phy1) + regnum * 4) & 0xffff;
|
|
}
|
|
|
|
static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
|
|
u16 value)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct altera_tse_private *priv = netdev_priv(ndev);
|
|
|
|
/* set MDIO address */
|
|
csrwr32((mii_id & 0x1f), priv->mac_dev,
|
|
tse_csroffs(mdio_phy1_addr));
|
|
|
|
/* write the data */
|
|
csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy1) + regnum * 4);
|
|
return 0;
|
|
}
|
|
|
|
static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
int ret;
|
|
struct device_node *mdio_node = NULL;
|
|
struct mii_bus *mdio = NULL;
|
|
struct device_node *child_node = NULL;
|
|
|
|
for_each_child_of_node(priv->device->of_node, child_node) {
|
|
if (of_device_is_compatible(child_node, "altr,tse-mdio")) {
|
|
mdio_node = child_node;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (mdio_node) {
|
|
netdev_dbg(dev, "FOUND MDIO subnode\n");
|
|
} else {
|
|
netdev_dbg(dev, "NO MDIO subnode\n");
|
|
return 0;
|
|
}
|
|
|
|
mdio = mdiobus_alloc();
|
|
if (mdio == NULL) {
|
|
netdev_err(dev, "Error allocating MDIO bus\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mdio->name = ALTERA_TSE_RESOURCE_NAME;
|
|
mdio->read = &altera_tse_mdio_read;
|
|
mdio->write = &altera_tse_mdio_write;
|
|
snprintf(mdio->id, MII_BUS_ID_SIZE, "%s-%u", mdio->name, id);
|
|
|
|
mdio->priv = dev;
|
|
mdio->parent = priv->device;
|
|
|
|
ret = of_mdiobus_register(mdio, mdio_node);
|
|
if (ret != 0) {
|
|
netdev_err(dev, "Cannot register MDIO bus %s\n",
|
|
mdio->id);
|
|
goto out_free_mdio;
|
|
}
|
|
|
|
if (netif_msg_drv(priv))
|
|
netdev_info(dev, "MDIO bus %s: created\n", mdio->id);
|
|
|
|
priv->mdio = mdio;
|
|
return 0;
|
|
out_free_mdio:
|
|
mdiobus_free(mdio);
|
|
mdio = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static void altera_tse_mdio_destroy(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
|
|
if (priv->mdio == NULL)
|
|
return;
|
|
|
|
if (netif_msg_drv(priv))
|
|
netdev_info(dev, "MDIO bus %s: removed\n",
|
|
priv->mdio->id);
|
|
|
|
mdiobus_unregister(priv->mdio);
|
|
mdiobus_free(priv->mdio);
|
|
priv->mdio = NULL;
|
|
}
|
|
|
|
static int tse_init_rx_buffer(struct altera_tse_private *priv,
|
|
struct tse_buffer *rxbuffer, int len)
|
|
{
|
|
rxbuffer->skb = netdev_alloc_skb_ip_align(priv->dev, len);
|
|
if (!rxbuffer->skb)
|
|
return -ENOMEM;
|
|
|
|
rxbuffer->dma_addr = dma_map_single(priv->device, rxbuffer->skb->data,
|
|
len,
|
|
DMA_FROM_DEVICE);
|
|
|
|
if (dma_mapping_error(priv->device, rxbuffer->dma_addr)) {
|
|
netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
|
|
dev_kfree_skb_any(rxbuffer->skb);
|
|
return -EINVAL;
|
|
}
|
|
rxbuffer->dma_addr &= (dma_addr_t)~3;
|
|
rxbuffer->len = len;
|
|
return 0;
|
|
}
|
|
|
|
static void tse_free_rx_buffer(struct altera_tse_private *priv,
|
|
struct tse_buffer *rxbuffer)
|
|
{
|
|
struct sk_buff *skb = rxbuffer->skb;
|
|
dma_addr_t dma_addr = rxbuffer->dma_addr;
|
|
|
|
if (skb != NULL) {
|
|
if (dma_addr)
|
|
dma_unmap_single(priv->device, dma_addr,
|
|
rxbuffer->len,
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
rxbuffer->skb = NULL;
|
|
rxbuffer->dma_addr = 0;
|
|
}
|
|
}
|
|
|
|
/* Unmap and free Tx buffer resources
|
|
*/
|
|
static void tse_free_tx_buffer(struct altera_tse_private *priv,
|
|
struct tse_buffer *buffer)
|
|
{
|
|
if (buffer->dma_addr) {
|
|
if (buffer->mapped_as_page)
|
|
dma_unmap_page(priv->device, buffer->dma_addr,
|
|
buffer->len, DMA_TO_DEVICE);
|
|
else
|
|
dma_unmap_single(priv->device, buffer->dma_addr,
|
|
buffer->len, DMA_TO_DEVICE);
|
|
buffer->dma_addr = 0;
|
|
}
|
|
if (buffer->skb) {
|
|
dev_kfree_skb_any(buffer->skb);
|
|
buffer->skb = NULL;
|
|
}
|
|
}
|
|
|
|
static int alloc_init_skbufs(struct altera_tse_private *priv)
|
|
{
|
|
unsigned int rx_descs = priv->rx_ring_size;
|
|
unsigned int tx_descs = priv->tx_ring_size;
|
|
int ret = -ENOMEM;
|
|
int i;
|
|
|
|
/* Create Rx ring buffer */
|
|
priv->rx_ring = kcalloc(rx_descs, sizeof(struct tse_buffer),
|
|
GFP_KERNEL);
|
|
if (!priv->rx_ring)
|
|
goto err_rx_ring;
|
|
|
|
/* Create Tx ring buffer */
|
|
priv->tx_ring = kcalloc(tx_descs, sizeof(struct tse_buffer),
|
|
GFP_KERNEL);
|
|
if (!priv->tx_ring)
|
|
goto err_tx_ring;
|
|
|
|
priv->tx_cons = 0;
|
|
priv->tx_prod = 0;
|
|
|
|
/* Init Rx ring */
|
|
for (i = 0; i < rx_descs; i++) {
|
|
ret = tse_init_rx_buffer(priv, &priv->rx_ring[i],
|
|
priv->rx_dma_buf_sz);
|
|
if (ret)
|
|
goto err_init_rx_buffers;
|
|
}
|
|
|
|
priv->rx_cons = 0;
|
|
priv->rx_prod = 0;
|
|
|
|
return 0;
|
|
err_init_rx_buffers:
|
|
while (--i >= 0)
|
|
tse_free_rx_buffer(priv, &priv->rx_ring[i]);
|
|
kfree(priv->tx_ring);
|
|
err_tx_ring:
|
|
kfree(priv->rx_ring);
|
|
err_rx_ring:
|
|
return ret;
|
|
}
|
|
|
|
static void free_skbufs(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
unsigned int rx_descs = priv->rx_ring_size;
|
|
unsigned int tx_descs = priv->tx_ring_size;
|
|
int i;
|
|
|
|
/* Release the DMA TX/RX socket buffers */
|
|
for (i = 0; i < rx_descs; i++)
|
|
tse_free_rx_buffer(priv, &priv->rx_ring[i]);
|
|
for (i = 0; i < tx_descs; i++)
|
|
tse_free_tx_buffer(priv, &priv->tx_ring[i]);
|
|
|
|
|
|
kfree(priv->tx_ring);
|
|
}
|
|
|
|
/* Reallocate the skb for the reception process
|
|
*/
|
|
static inline void tse_rx_refill(struct altera_tse_private *priv)
|
|
{
|
|
unsigned int rxsize = priv->rx_ring_size;
|
|
unsigned int entry;
|
|
int ret;
|
|
|
|
for (; priv->rx_cons - priv->rx_prod > 0;
|
|
priv->rx_prod++) {
|
|
entry = priv->rx_prod % rxsize;
|
|
if (likely(priv->rx_ring[entry].skb == NULL)) {
|
|
ret = tse_init_rx_buffer(priv, &priv->rx_ring[entry],
|
|
priv->rx_dma_buf_sz);
|
|
if (unlikely(ret != 0))
|
|
break;
|
|
priv->dmaops->add_rx_desc(priv, &priv->rx_ring[entry]);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Pull out the VLAN tag and fix up the packet
|
|
*/
|
|
static inline void tse_rx_vlan(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
struct ethhdr *eth_hdr;
|
|
u16 vid;
|
|
if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
|
|
!__vlan_get_tag(skb, &vid)) {
|
|
eth_hdr = (struct ethhdr *)skb->data;
|
|
memmove(skb->data + VLAN_HLEN, eth_hdr, ETH_ALEN * 2);
|
|
skb_pull(skb, VLAN_HLEN);
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
|
|
}
|
|
}
|
|
|
|
/* Receive a packet: retrieve and pass over to upper levels
|
|
*/
|
|
static int tse_rx(struct altera_tse_private *priv, int limit)
|
|
{
|
|
unsigned int count = 0;
|
|
unsigned int next_entry;
|
|
struct sk_buff *skb;
|
|
unsigned int entry = priv->rx_cons % priv->rx_ring_size;
|
|
u32 rxstatus;
|
|
u16 pktlength;
|
|
u16 pktstatus;
|
|
|
|
/* Check for count < limit first as get_rx_status is changing
|
|
* the response-fifo so we must process the next packet
|
|
* after calling get_rx_status if a response is pending.
|
|
* (reading the last byte of the response pops the value from the fifo.)
|
|
*/
|
|
while ((count < limit) &&
|
|
((rxstatus = priv->dmaops->get_rx_status(priv)) != 0)) {
|
|
pktstatus = rxstatus >> 16;
|
|
pktlength = rxstatus & 0xffff;
|
|
|
|
if ((pktstatus & 0xFF) || (pktlength == 0))
|
|
netdev_err(priv->dev,
|
|
"RCV pktstatus %08X pktlength %08X\n",
|
|
pktstatus, pktlength);
|
|
|
|
/* DMA trasfer from TSE starts with 2 aditional bytes for
|
|
* IP payload alignment. Status returned by get_rx_status()
|
|
* contains DMA transfer length. Packet is 2 bytes shorter.
|
|
*/
|
|
pktlength -= 2;
|
|
|
|
count++;
|
|
next_entry = (++priv->rx_cons) % priv->rx_ring_size;
|
|
|
|
skb = priv->rx_ring[entry].skb;
|
|
if (unlikely(!skb)) {
|
|
netdev_err(priv->dev,
|
|
"%s: Inconsistent Rx descriptor chain\n",
|
|
__func__);
|
|
priv->dev->stats.rx_dropped++;
|
|
break;
|
|
}
|
|
priv->rx_ring[entry].skb = NULL;
|
|
|
|
skb_put(skb, pktlength);
|
|
|
|
dma_unmap_single(priv->device, priv->rx_ring[entry].dma_addr,
|
|
priv->rx_ring[entry].len, DMA_FROM_DEVICE);
|
|
|
|
if (netif_msg_pktdata(priv)) {
|
|
netdev_info(priv->dev, "frame received %d bytes\n",
|
|
pktlength);
|
|
print_hex_dump(KERN_ERR, "data: ", DUMP_PREFIX_OFFSET,
|
|
16, 1, skb->data, pktlength, true);
|
|
}
|
|
|
|
tse_rx_vlan(priv->dev, skb);
|
|
|
|
skb->protocol = eth_type_trans(skb, priv->dev);
|
|
skb_checksum_none_assert(skb);
|
|
|
|
napi_gro_receive(&priv->napi, skb);
|
|
|
|
priv->dev->stats.rx_packets++;
|
|
priv->dev->stats.rx_bytes += pktlength;
|
|
|
|
entry = next_entry;
|
|
|
|
tse_rx_refill(priv);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/* Reclaim resources after transmission completes
|
|
*/
|
|
static int tse_tx_complete(struct altera_tse_private *priv)
|
|
{
|
|
unsigned int txsize = priv->tx_ring_size;
|
|
u32 ready;
|
|
unsigned int entry;
|
|
struct tse_buffer *tx_buff;
|
|
int txcomplete = 0;
|
|
|
|
spin_lock(&priv->tx_lock);
|
|
|
|
ready = priv->dmaops->tx_completions(priv);
|
|
|
|
/* Free sent buffers */
|
|
while (ready && (priv->tx_cons != priv->tx_prod)) {
|
|
entry = priv->tx_cons % txsize;
|
|
tx_buff = &priv->tx_ring[entry];
|
|
|
|
if (netif_msg_tx_done(priv))
|
|
netdev_dbg(priv->dev, "%s: curr %d, dirty %d\n",
|
|
__func__, priv->tx_prod, priv->tx_cons);
|
|
|
|
if (likely(tx_buff->skb))
|
|
priv->dev->stats.tx_packets++;
|
|
|
|
tse_free_tx_buffer(priv, tx_buff);
|
|
priv->tx_cons++;
|
|
|
|
txcomplete++;
|
|
ready--;
|
|
}
|
|
|
|
if (unlikely(netif_queue_stopped(priv->dev) &&
|
|
tse_tx_avail(priv) > TSE_TX_THRESH(priv))) {
|
|
if (netif_queue_stopped(priv->dev) &&
|
|
tse_tx_avail(priv) > TSE_TX_THRESH(priv)) {
|
|
if (netif_msg_tx_done(priv))
|
|
netdev_dbg(priv->dev, "%s: restart transmit\n",
|
|
__func__);
|
|
netif_wake_queue(priv->dev);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&priv->tx_lock);
|
|
return txcomplete;
|
|
}
|
|
|
|
/* NAPI polling function
|
|
*/
|
|
static int tse_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct altera_tse_private *priv =
|
|
container_of(napi, struct altera_tse_private, napi);
|
|
int rxcomplete = 0;
|
|
unsigned long int flags;
|
|
|
|
tse_tx_complete(priv);
|
|
|
|
rxcomplete = tse_rx(priv, budget);
|
|
|
|
if (rxcomplete < budget) {
|
|
|
|
napi_complete_done(napi, rxcomplete);
|
|
|
|
netdev_dbg(priv->dev,
|
|
"NAPI Complete, did %d packets with budget %d\n",
|
|
rxcomplete, budget);
|
|
|
|
spin_lock_irqsave(&priv->rxdma_irq_lock, flags);
|
|
priv->dmaops->enable_rxirq(priv);
|
|
priv->dmaops->enable_txirq(priv);
|
|
spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
|
|
}
|
|
return rxcomplete;
|
|
}
|
|
|
|
/* DMA TX & RX FIFO interrupt routing
|
|
*/
|
|
static irqreturn_t altera_isr(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct altera_tse_private *priv;
|
|
|
|
if (unlikely(!dev)) {
|
|
pr_err("%s: invalid dev pointer\n", __func__);
|
|
return IRQ_NONE;
|
|
}
|
|
priv = netdev_priv(dev);
|
|
|
|
spin_lock(&priv->rxdma_irq_lock);
|
|
/* reset IRQs */
|
|
priv->dmaops->clear_rxirq(priv);
|
|
priv->dmaops->clear_txirq(priv);
|
|
spin_unlock(&priv->rxdma_irq_lock);
|
|
|
|
if (likely(napi_schedule_prep(&priv->napi))) {
|
|
spin_lock(&priv->rxdma_irq_lock);
|
|
priv->dmaops->disable_rxirq(priv);
|
|
priv->dmaops->disable_txirq(priv);
|
|
spin_unlock(&priv->rxdma_irq_lock);
|
|
__napi_schedule(&priv->napi);
|
|
}
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Transmit a packet (called by the kernel). Dispatches
|
|
* either the SGDMA method for transmitting or the
|
|
* MSGDMA method, assumes no scatter/gather support,
|
|
* implying an assumption that there's only one
|
|
* physically contiguous fragment starting at
|
|
* skb->data, for length of skb_headlen(skb).
|
|
*/
|
|
static int tse_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
unsigned int txsize = priv->tx_ring_size;
|
|
unsigned int entry;
|
|
struct tse_buffer *buffer = NULL;
|
|
int nfrags = skb_shinfo(skb)->nr_frags;
|
|
unsigned int nopaged_len = skb_headlen(skb);
|
|
enum netdev_tx ret = NETDEV_TX_OK;
|
|
dma_addr_t dma_addr;
|
|
|
|
spin_lock_bh(&priv->tx_lock);
|
|
|
|
if (unlikely(tse_tx_avail(priv) < nfrags + 1)) {
|
|
if (!netif_queue_stopped(dev)) {
|
|
netif_stop_queue(dev);
|
|
/* This is a hard error, log it. */
|
|
netdev_err(priv->dev,
|
|
"%s: Tx list full when queue awake\n",
|
|
__func__);
|
|
}
|
|
ret = NETDEV_TX_BUSY;
|
|
goto out;
|
|
}
|
|
|
|
/* Map the first skb fragment */
|
|
entry = priv->tx_prod % txsize;
|
|
buffer = &priv->tx_ring[entry];
|
|
|
|
dma_addr = dma_map_single(priv->device, skb->data, nopaged_len,
|
|
DMA_TO_DEVICE);
|
|
if (dma_mapping_error(priv->device, dma_addr)) {
|
|
netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
|
|
ret = NETDEV_TX_OK;
|
|
goto out;
|
|
}
|
|
|
|
buffer->skb = skb;
|
|
buffer->dma_addr = dma_addr;
|
|
buffer->len = nopaged_len;
|
|
|
|
priv->dmaops->tx_buffer(priv, buffer);
|
|
|
|
skb_tx_timestamp(skb);
|
|
|
|
priv->tx_prod++;
|
|
dev->stats.tx_bytes += skb->len;
|
|
|
|
if (unlikely(tse_tx_avail(priv) <= TXQUEUESTOP_THRESHHOLD)) {
|
|
if (netif_msg_hw(priv))
|
|
netdev_dbg(priv->dev, "%s: stop transmitted packets\n",
|
|
__func__);
|
|
netif_stop_queue(dev);
|
|
}
|
|
|
|
out:
|
|
spin_unlock_bh(&priv->tx_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Called every time the controller might need to be made
|
|
* aware of new link state. The PHY code conveys this
|
|
* information through variables in the phydev structure, and this
|
|
* function converts those variables into the appropriate
|
|
* register values, and can bring down the device if needed.
|
|
*/
|
|
static void altera_tse_adjust_link(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
struct phy_device *phydev = dev->phydev;
|
|
int new_state = 0;
|
|
|
|
/* only change config if there is a link */
|
|
spin_lock(&priv->mac_cfg_lock);
|
|
if (phydev->link) {
|
|
/* Read old config */
|
|
u32 cfg_reg = ioread32(&priv->mac_dev->command_config);
|
|
|
|
/* Check duplex */
|
|
if (phydev->duplex != priv->oldduplex) {
|
|
new_state = 1;
|
|
if (!(phydev->duplex))
|
|
cfg_reg |= MAC_CMDCFG_HD_ENA;
|
|
else
|
|
cfg_reg &= ~MAC_CMDCFG_HD_ENA;
|
|
|
|
netdev_dbg(priv->dev, "%s: Link duplex = 0x%x\n",
|
|
dev->name, phydev->duplex);
|
|
|
|
priv->oldduplex = phydev->duplex;
|
|
}
|
|
|
|
/* Check speed */
|
|
if (phydev->speed != priv->oldspeed) {
|
|
new_state = 1;
|
|
switch (phydev->speed) {
|
|
case 1000:
|
|
cfg_reg |= MAC_CMDCFG_ETH_SPEED;
|
|
cfg_reg &= ~MAC_CMDCFG_ENA_10;
|
|
break;
|
|
case 100:
|
|
cfg_reg &= ~MAC_CMDCFG_ETH_SPEED;
|
|
cfg_reg &= ~MAC_CMDCFG_ENA_10;
|
|
break;
|
|
case 10:
|
|
cfg_reg &= ~MAC_CMDCFG_ETH_SPEED;
|
|
cfg_reg |= MAC_CMDCFG_ENA_10;
|
|
break;
|
|
default:
|
|
if (netif_msg_link(priv))
|
|
netdev_warn(dev, "Speed (%d) is not 10/100/1000!\n",
|
|
phydev->speed);
|
|
break;
|
|
}
|
|
priv->oldspeed = phydev->speed;
|
|
}
|
|
iowrite32(cfg_reg, &priv->mac_dev->command_config);
|
|
|
|
if (!priv->oldlink) {
|
|
new_state = 1;
|
|
priv->oldlink = 1;
|
|
}
|
|
} else if (priv->oldlink) {
|
|
new_state = 1;
|
|
priv->oldlink = 0;
|
|
priv->oldspeed = 0;
|
|
priv->oldduplex = -1;
|
|
}
|
|
|
|
if (new_state && netif_msg_link(priv))
|
|
phy_print_status(phydev);
|
|
|
|
spin_unlock(&priv->mac_cfg_lock);
|
|
}
|
|
static struct phy_device *connect_local_phy(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
struct phy_device *phydev = NULL;
|
|
char phy_id_fmt[MII_BUS_ID_SIZE + 3];
|
|
|
|
if (priv->phy_addr != POLL_PHY) {
|
|
snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
|
|
priv->mdio->id, priv->phy_addr);
|
|
|
|
netdev_dbg(dev, "trying to attach to %s\n", phy_id_fmt);
|
|
|
|
phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link,
|
|
priv->phy_iface);
|
|
if (IS_ERR(phydev)) {
|
|
netdev_err(dev, "Could not attach to PHY\n");
|
|
phydev = NULL;
|
|
}
|
|
|
|
} else {
|
|
int ret;
|
|
phydev = phy_find_first(priv->mdio);
|
|
if (phydev == NULL) {
|
|
netdev_err(dev, "No PHY found\n");
|
|
return phydev;
|
|
}
|
|
|
|
ret = phy_connect_direct(dev, phydev, &altera_tse_adjust_link,
|
|
priv->phy_iface);
|
|
if (ret != 0) {
|
|
netdev_err(dev, "Could not attach to PHY\n");
|
|
phydev = NULL;
|
|
}
|
|
}
|
|
return phydev;
|
|
}
|
|
|
|
static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
struct device_node *np = priv->device->of_node;
|
|
int ret = 0;
|
|
|
|
priv->phy_iface = of_get_phy_mode(np);
|
|
|
|
/* Avoid get phy addr and create mdio if no phy is present */
|
|
if (!priv->phy_iface)
|
|
return 0;
|
|
|
|
/* try to get PHY address from device tree, use PHY autodetection if
|
|
* no valid address is given
|
|
*/
|
|
|
|
if (of_property_read_u32(priv->device->of_node, "phy-addr",
|
|
&priv->phy_addr)) {
|
|
priv->phy_addr = POLL_PHY;
|
|
}
|
|
|
|
if (!((priv->phy_addr == POLL_PHY) ||
|
|
((priv->phy_addr >= 0) && (priv->phy_addr < PHY_MAX_ADDR)))) {
|
|
netdev_err(dev, "invalid phy-addr specified %d\n",
|
|
priv->phy_addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Create/attach to MDIO bus */
|
|
ret = altera_tse_mdio_create(dev,
|
|
atomic_add_return(1, &instance_count));
|
|
|
|
if (ret)
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Initialize driver's PHY state, and attach to the PHY
|
|
*/
|
|
static int init_phy(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
struct phy_device *phydev;
|
|
struct device_node *phynode;
|
|
bool fixed_link = false;
|
|
int rc = 0;
|
|
|
|
/* Avoid init phy in case of no phy present */
|
|
if (!priv->phy_iface)
|
|
return 0;
|
|
|
|
priv->oldlink = 0;
|
|
priv->oldspeed = 0;
|
|
priv->oldduplex = -1;
|
|
|
|
phynode = of_parse_phandle(priv->device->of_node, "phy-handle", 0);
|
|
|
|
if (!phynode) {
|
|
/* check if a fixed-link is defined in device-tree */
|
|
if (of_phy_is_fixed_link(priv->device->of_node)) {
|
|
rc = of_phy_register_fixed_link(priv->device->of_node);
|
|
if (rc < 0) {
|
|
netdev_err(dev, "cannot register fixed PHY\n");
|
|
return rc;
|
|
}
|
|
|
|
/* In the case of a fixed PHY, the DT node associated
|
|
* to the PHY is the Ethernet MAC DT node.
|
|
*/
|
|
phynode = of_node_get(priv->device->of_node);
|
|
fixed_link = true;
|
|
|
|
netdev_dbg(dev, "fixed-link detected\n");
|
|
phydev = of_phy_connect(dev, phynode,
|
|
&altera_tse_adjust_link,
|
|
0, priv->phy_iface);
|
|
} else {
|
|
netdev_dbg(dev, "no phy-handle found\n");
|
|
if (!priv->mdio) {
|
|
netdev_err(dev, "No phy-handle nor local mdio specified\n");
|
|
return -ENODEV;
|
|
}
|
|
phydev = connect_local_phy(dev);
|
|
}
|
|
} else {
|
|
netdev_dbg(dev, "phy-handle found\n");
|
|
phydev = of_phy_connect(dev, phynode,
|
|
&altera_tse_adjust_link, 0, priv->phy_iface);
|
|
}
|
|
of_node_put(phynode);
|
|
|
|
if (!phydev) {
|
|
netdev_err(dev, "Could not find the PHY\n");
|
|
if (fixed_link)
|
|
of_phy_deregister_fixed_link(priv->device->of_node);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Stop Advertising 1000BASE Capability if interface is not GMII
|
|
* Note: Checkpatch throws CHECKs for the camel case defines below,
|
|
* it's ok to ignore.
|
|
*/
|
|
if ((priv->phy_iface == PHY_INTERFACE_MODE_MII) ||
|
|
(priv->phy_iface == PHY_INTERFACE_MODE_RMII))
|
|
phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full);
|
|
|
|
/* Broken HW is sometimes missing the pull-up resistor on the
|
|
* MDIO line, which results in reads to non-existent devices returning
|
|
* 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
|
|
* device as well. If a fixed-link is used the phy_id is always 0.
|
|
* Note: phydev->phy_id is the result of reading the UID PHY registers.
|
|
*/
|
|
if ((phydev->phy_id == 0) && !fixed_link) {
|
|
netdev_err(dev, "Bad PHY UID 0x%08x\n", phydev->phy_id);
|
|
phy_disconnect(phydev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
netdev_dbg(dev, "attached to PHY %d UID 0x%08x Link = %d\n",
|
|
phydev->mdio.addr, phydev->phy_id, phydev->link);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tse_update_mac_addr(struct altera_tse_private *priv, u8 *addr)
|
|
{
|
|
u32 msb;
|
|
u32 lsb;
|
|
|
|
msb = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
|
|
lsb = ((addr[5] << 8) | addr[4]) & 0xffff;
|
|
|
|
/* Set primary MAC address */
|
|
csrwr32(msb, priv->mac_dev, tse_csroffs(mac_addr_0));
|
|
csrwr32(lsb, priv->mac_dev, tse_csroffs(mac_addr_1));
|
|
}
|
|
|
|
/* MAC software reset.
|
|
* When reset is triggered, the MAC function completes the current
|
|
* transmission or reception, and subsequently disables the transmit and
|
|
* receive logic, flushes the receive FIFO buffer, and resets the statistics
|
|
* counters.
|
|
*/
|
|
static int reset_mac(struct altera_tse_private *priv)
|
|
{
|
|
int counter;
|
|
u32 dat;
|
|
|
|
dat = csrrd32(priv->mac_dev, tse_csroffs(command_config));
|
|
dat &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA);
|
|
dat |= MAC_CMDCFG_SW_RESET | MAC_CMDCFG_CNT_RESET;
|
|
csrwr32(dat, priv->mac_dev, tse_csroffs(command_config));
|
|
|
|
counter = 0;
|
|
while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) {
|
|
if (tse_bit_is_clear(priv->mac_dev, tse_csroffs(command_config),
|
|
MAC_CMDCFG_SW_RESET))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
|
|
if (counter >= ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) {
|
|
dat = csrrd32(priv->mac_dev, tse_csroffs(command_config));
|
|
dat &= ~MAC_CMDCFG_SW_RESET;
|
|
csrwr32(dat, priv->mac_dev, tse_csroffs(command_config));
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Initialize MAC core registers
|
|
*/
|
|
static int init_mac(struct altera_tse_private *priv)
|
|
{
|
|
unsigned int cmd = 0;
|
|
u32 frm_length;
|
|
|
|
/* Setup Rx FIFO */
|
|
csrwr32(priv->rx_fifo_depth - ALTERA_TSE_RX_SECTION_EMPTY,
|
|
priv->mac_dev, tse_csroffs(rx_section_empty));
|
|
|
|
csrwr32(ALTERA_TSE_RX_SECTION_FULL, priv->mac_dev,
|
|
tse_csroffs(rx_section_full));
|
|
|
|
csrwr32(ALTERA_TSE_RX_ALMOST_EMPTY, priv->mac_dev,
|
|
tse_csroffs(rx_almost_empty));
|
|
|
|
csrwr32(ALTERA_TSE_RX_ALMOST_FULL, priv->mac_dev,
|
|
tse_csroffs(rx_almost_full));
|
|
|
|
/* Setup Tx FIFO */
|
|
csrwr32(priv->tx_fifo_depth - ALTERA_TSE_TX_SECTION_EMPTY,
|
|
priv->mac_dev, tse_csroffs(tx_section_empty));
|
|
|
|
csrwr32(ALTERA_TSE_TX_SECTION_FULL, priv->mac_dev,
|
|
tse_csroffs(tx_section_full));
|
|
|
|
csrwr32(ALTERA_TSE_TX_ALMOST_EMPTY, priv->mac_dev,
|
|
tse_csroffs(tx_almost_empty));
|
|
|
|
csrwr32(ALTERA_TSE_TX_ALMOST_FULL, priv->mac_dev,
|
|
tse_csroffs(tx_almost_full));
|
|
|
|
/* MAC Address Configuration */
|
|
tse_update_mac_addr(priv, priv->dev->dev_addr);
|
|
|
|
/* MAC Function Configuration */
|
|
frm_length = ETH_HLEN + priv->dev->mtu + ETH_FCS_LEN;
|
|
csrwr32(frm_length, priv->mac_dev, tse_csroffs(frm_length));
|
|
|
|
csrwr32(ALTERA_TSE_TX_IPG_LENGTH, priv->mac_dev,
|
|
tse_csroffs(tx_ipg_length));
|
|
|
|
/* Disable RX/TX shift 16 for alignment of all received frames on 16-bit
|
|
* start address
|
|
*/
|
|
tse_set_bit(priv->mac_dev, tse_csroffs(rx_cmd_stat),
|
|
ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16);
|
|
|
|
tse_clear_bit(priv->mac_dev, tse_csroffs(tx_cmd_stat),
|
|
ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 |
|
|
ALTERA_TSE_TX_CMD_STAT_OMIT_CRC);
|
|
|
|
/* Set the MAC options */
|
|
cmd = csrrd32(priv->mac_dev, tse_csroffs(command_config));
|
|
cmd &= ~MAC_CMDCFG_PAD_EN; /* No padding Removal on Receive */
|
|
cmd &= ~MAC_CMDCFG_CRC_FWD; /* CRC Removal */
|
|
cmd |= MAC_CMDCFG_RX_ERR_DISC; /* Automatically discard frames
|
|
* with CRC errors
|
|
*/
|
|
cmd |= MAC_CMDCFG_CNTL_FRM_ENA;
|
|
cmd &= ~MAC_CMDCFG_TX_ENA;
|
|
cmd &= ~MAC_CMDCFG_RX_ENA;
|
|
|
|
/* Default speed and duplex setting, full/100 */
|
|
cmd &= ~MAC_CMDCFG_HD_ENA;
|
|
cmd &= ~MAC_CMDCFG_ETH_SPEED;
|
|
cmd &= ~MAC_CMDCFG_ENA_10;
|
|
|
|
csrwr32(cmd, priv->mac_dev, tse_csroffs(command_config));
|
|
|
|
csrwr32(ALTERA_TSE_PAUSE_QUANTA, priv->mac_dev,
|
|
tse_csroffs(pause_quanta));
|
|
|
|
if (netif_msg_hw(priv))
|
|
dev_dbg(priv->device,
|
|
"MAC post-initialization: CMD_CONFIG = 0x%08x\n", cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Start/stop MAC transmission logic
|
|
*/
|
|
static void tse_set_mac(struct altera_tse_private *priv, bool enable)
|
|
{
|
|
u32 value = csrrd32(priv->mac_dev, tse_csroffs(command_config));
|
|
|
|
if (enable)
|
|
value |= MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA;
|
|
else
|
|
value &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA);
|
|
|
|
csrwr32(value, priv->mac_dev, tse_csroffs(command_config));
|
|
}
|
|
|
|
/* Change the MTU
|
|
*/
|
|
static int tse_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
if (netif_running(dev)) {
|
|
netdev_err(dev, "must be stopped to change its MTU\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
dev->mtu = new_mtu;
|
|
netdev_update_features(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void altera_tse_set_mcfilter(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
int i;
|
|
struct netdev_hw_addr *ha;
|
|
|
|
/* clear the hash filter */
|
|
for (i = 0; i < 64; i++)
|
|
csrwr32(0, priv->mac_dev, tse_csroffs(hash_table) + i * 4);
|
|
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
unsigned int hash = 0;
|
|
int mac_octet;
|
|
|
|
for (mac_octet = 5; mac_octet >= 0; mac_octet--) {
|
|
unsigned char xor_bit = 0;
|
|
unsigned char octet = ha->addr[mac_octet];
|
|
unsigned int bitshift;
|
|
|
|
for (bitshift = 0; bitshift < 8; bitshift++)
|
|
xor_bit ^= ((octet >> bitshift) & 0x01);
|
|
|
|
hash = (hash << 1) | xor_bit;
|
|
}
|
|
csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + hash * 4);
|
|
}
|
|
}
|
|
|
|
|
|
static void altera_tse_set_mcfilterall(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
int i;
|
|
|
|
/* set the hash filter */
|
|
for (i = 0; i < 64; i++)
|
|
csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + i * 4);
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor
|
|
*/
|
|
static void tse_set_rx_mode_hashfilter(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
|
|
spin_lock(&priv->mac_cfg_lock);
|
|
|
|
if (dev->flags & IFF_PROMISC)
|
|
tse_set_bit(priv->mac_dev, tse_csroffs(command_config),
|
|
MAC_CMDCFG_PROMIS_EN);
|
|
|
|
if (dev->flags & IFF_ALLMULTI)
|
|
altera_tse_set_mcfilterall(dev);
|
|
else
|
|
altera_tse_set_mcfilter(dev);
|
|
|
|
spin_unlock(&priv->mac_cfg_lock);
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor
|
|
*/
|
|
static void tse_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
|
|
spin_lock(&priv->mac_cfg_lock);
|
|
|
|
if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
|
|
!netdev_mc_empty(dev) || !netdev_uc_empty(dev))
|
|
tse_set_bit(priv->mac_dev, tse_csroffs(command_config),
|
|
MAC_CMDCFG_PROMIS_EN);
|
|
else
|
|
tse_clear_bit(priv->mac_dev, tse_csroffs(command_config),
|
|
MAC_CMDCFG_PROMIS_EN);
|
|
|
|
spin_unlock(&priv->mac_cfg_lock);
|
|
}
|
|
|
|
/* Initialise (if necessary) the SGMII PCS component
|
|
*/
|
|
static int init_sgmii_pcs(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
int n;
|
|
unsigned int tmp_reg = 0;
|
|
|
|
if (priv->phy_iface != PHY_INTERFACE_MODE_SGMII)
|
|
return 0; /* Nothing to do, not in SGMII mode */
|
|
|
|
/* The TSE SGMII PCS block looks a little like a PHY, it is
|
|
* mapped into the zeroth MDIO space of the MAC and it has
|
|
* ID registers like a PHY would. Sadly this is often
|
|
* configured to zeroes, so don't be surprised if it does
|
|
* show 0x00000000.
|
|
*/
|
|
|
|
if (sgmii_pcs_scratch_test(priv, 0x0000) &&
|
|
sgmii_pcs_scratch_test(priv, 0xffff) &&
|
|
sgmii_pcs_scratch_test(priv, 0xa5a5) &&
|
|
sgmii_pcs_scratch_test(priv, 0x5a5a)) {
|
|
netdev_info(dev, "PCS PHY ID: 0x%04x%04x\n",
|
|
sgmii_pcs_read(priv, MII_PHYSID1),
|
|
sgmii_pcs_read(priv, MII_PHYSID2));
|
|
} else {
|
|
netdev_err(dev, "SGMII PCS Scratch memory test failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Starting on page 5-29 of the MegaCore Function User Guide
|
|
* Set SGMII Link timer to 1.6ms
|
|
*/
|
|
sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_0, 0x0D40);
|
|
sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_1, 0x03);
|
|
|
|
/* Enable SGMII Interface and Enable SGMII Auto Negotiation */
|
|
sgmii_pcs_write(priv, SGMII_PCS_IF_MODE, 0x3);
|
|
|
|
/* Enable Autonegotiation */
|
|
tmp_reg = sgmii_pcs_read(priv, MII_BMCR);
|
|
tmp_reg |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
|
|
sgmii_pcs_write(priv, MII_BMCR, tmp_reg);
|
|
|
|
/* Reset PCS block */
|
|
tmp_reg |= BMCR_RESET;
|
|
sgmii_pcs_write(priv, MII_BMCR, tmp_reg);
|
|
for (n = 0; n < SGMII_PCS_SW_RESET_TIMEOUT; n++) {
|
|
if (!(sgmii_pcs_read(priv, MII_BMCR) & BMCR_RESET)) {
|
|
netdev_info(dev, "SGMII PCS block initialised OK\n");
|
|
return 0;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
/* We failed to reset the block, return a timeout */
|
|
netdev_err(dev, "SGMII PCS block reset failed.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Open and initialize the interface
|
|
*/
|
|
static int tse_open(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
int ret = 0;
|
|
int i;
|
|
unsigned long int flags;
|
|
|
|
/* Reset and configure TSE MAC and probe associated PHY */
|
|
ret = priv->dmaops->init_dma(priv);
|
|
if (ret != 0) {
|
|
netdev_err(dev, "Cannot initialize DMA\n");
|
|
goto phy_error;
|
|
}
|
|
|
|
if (netif_msg_ifup(priv))
|
|
netdev_warn(dev, "device MAC address %pM\n",
|
|
dev->dev_addr);
|
|
|
|
if ((priv->revision < 0xd00) || (priv->revision > 0xe00))
|
|
netdev_warn(dev, "TSE revision %x\n", priv->revision);
|
|
|
|
spin_lock(&priv->mac_cfg_lock);
|
|
/* no-op if MAC not operating in SGMII mode*/
|
|
ret = init_sgmii_pcs(dev);
|
|
if (ret) {
|
|
netdev_err(dev,
|
|
"Cannot init the SGMII PCS (error: %d)\n", ret);
|
|
spin_unlock(&priv->mac_cfg_lock);
|
|
goto phy_error;
|
|
}
|
|
|
|
ret = reset_mac(priv);
|
|
/* Note that reset_mac will fail if the clocks are gated by the PHY
|
|
* due to the PHY being put into isolation or power down mode.
|
|
* This is not an error if reset fails due to no clock.
|
|
*/
|
|
if (ret)
|
|
netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret);
|
|
|
|
ret = init_mac(priv);
|
|
spin_unlock(&priv->mac_cfg_lock);
|
|
if (ret) {
|
|
netdev_err(dev, "Cannot init MAC core (error: %d)\n", ret);
|
|
goto alloc_skbuf_error;
|
|
}
|
|
|
|
priv->dmaops->reset_dma(priv);
|
|
|
|
/* Create and initialize the TX/RX descriptors chains. */
|
|
priv->rx_ring_size = dma_rx_num;
|
|
priv->tx_ring_size = dma_tx_num;
|
|
ret = alloc_init_skbufs(priv);
|
|
if (ret) {
|
|
netdev_err(dev, "DMA descriptors initialization failed\n");
|
|
goto alloc_skbuf_error;
|
|
}
|
|
|
|
|
|
/* Register RX interrupt */
|
|
ret = request_irq(priv->rx_irq, altera_isr, IRQF_SHARED,
|
|
dev->name, dev);
|
|
if (ret) {
|
|
netdev_err(dev, "Unable to register RX interrupt %d\n",
|
|
priv->rx_irq);
|
|
goto init_error;
|
|
}
|
|
|
|
/* Register TX interrupt */
|
|
ret = request_irq(priv->tx_irq, altera_isr, IRQF_SHARED,
|
|
dev->name, dev);
|
|
if (ret) {
|
|
netdev_err(dev, "Unable to register TX interrupt %d\n",
|
|
priv->tx_irq);
|
|
goto tx_request_irq_error;
|
|
}
|
|
|
|
/* Enable DMA interrupts */
|
|
spin_lock_irqsave(&priv->rxdma_irq_lock, flags);
|
|
priv->dmaops->enable_rxirq(priv);
|
|
priv->dmaops->enable_txirq(priv);
|
|
|
|
/* Setup RX descriptor chain */
|
|
for (i = 0; i < priv->rx_ring_size; i++)
|
|
priv->dmaops->add_rx_desc(priv, &priv->rx_ring[i]);
|
|
|
|
spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
|
|
|
|
if (dev->phydev)
|
|
phy_start(dev->phydev);
|
|
|
|
napi_enable(&priv->napi);
|
|
netif_start_queue(dev);
|
|
|
|
priv->dmaops->start_rxdma(priv);
|
|
|
|
/* Start MAC Rx/Tx */
|
|
spin_lock(&priv->mac_cfg_lock);
|
|
tse_set_mac(priv, true);
|
|
spin_unlock(&priv->mac_cfg_lock);
|
|
|
|
return 0;
|
|
|
|
tx_request_irq_error:
|
|
free_irq(priv->rx_irq, dev);
|
|
init_error:
|
|
free_skbufs(dev);
|
|
alloc_skbuf_error:
|
|
phy_error:
|
|
return ret;
|
|
}
|
|
|
|
/* Stop TSE MAC interface and put the device in an inactive state
|
|
*/
|
|
static int tse_shutdown(struct net_device *dev)
|
|
{
|
|
struct altera_tse_private *priv = netdev_priv(dev);
|
|
int ret;
|
|
unsigned long int flags;
|
|
|
|
/* Stop the PHY */
|
|
if (dev->phydev)
|
|
phy_stop(dev->phydev);
|
|
|
|
netif_stop_queue(dev);
|
|
napi_disable(&priv->napi);
|
|
|
|
/* Disable DMA interrupts */
|
|
spin_lock_irqsave(&priv->rxdma_irq_lock, flags);
|
|
priv->dmaops->disable_rxirq(priv);
|
|
priv->dmaops->disable_txirq(priv);
|
|
spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags);
|
|
|
|
/* Free the IRQ lines */
|
|
free_irq(priv->rx_irq, dev);
|
|
free_irq(priv->tx_irq, dev);
|
|
|
|
/* disable and reset the MAC, empties fifo */
|
|
spin_lock(&priv->mac_cfg_lock);
|
|
spin_lock(&priv->tx_lock);
|
|
|
|
ret = reset_mac(priv);
|
|
/* Note that reset_mac will fail if the clocks are gated by the PHY
|
|
* due to the PHY being put into isolation or power down mode.
|
|
* This is not an error if reset fails due to no clock.
|
|
*/
|
|
if (ret)
|
|
netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret);
|
|
priv->dmaops->reset_dma(priv);
|
|
free_skbufs(dev);
|
|
|
|
spin_unlock(&priv->tx_lock);
|
|
spin_unlock(&priv->mac_cfg_lock);
|
|
|
|
priv->dmaops->uninit_dma(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_ops altera_tse_netdev_ops = {
|
|
.ndo_open = tse_open,
|
|
.ndo_stop = tse_shutdown,
|
|
.ndo_start_xmit = tse_start_xmit,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_set_rx_mode = tse_set_rx_mode,
|
|
.ndo_change_mtu = tse_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
static int request_and_map(struct platform_device *pdev, const char *name,
|
|
struct resource **res, void __iomem **ptr)
|
|
{
|
|
struct resource *region;
|
|
struct device *device = &pdev->dev;
|
|
|
|
*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
|
|
if (*res == NULL) {
|
|
dev_err(device, "resource %s not defined\n", name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
region = devm_request_mem_region(device, (*res)->start,
|
|
resource_size(*res), dev_name(device));
|
|
if (region == NULL) {
|
|
dev_err(device, "unable to request %s\n", name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
*ptr = devm_ioremap_nocache(device, region->start,
|
|
resource_size(region));
|
|
if (*ptr == NULL) {
|
|
dev_err(device, "ioremap_nocache of %s failed!", name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Probe Altera TSE MAC device
|
|
*/
|
|
static int altera_tse_probe(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev;
|
|
int ret = -ENODEV;
|
|
struct resource *control_port;
|
|
struct resource *dma_res;
|
|
struct altera_tse_private *priv;
|
|
const unsigned char *macaddr;
|
|
void __iomem *descmap;
|
|
const struct of_device_id *of_id = NULL;
|
|
|
|
ndev = alloc_etherdev(sizeof(struct altera_tse_private));
|
|
if (!ndev) {
|
|
dev_err(&pdev->dev, "Could not allocate network device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
|
|
priv = netdev_priv(ndev);
|
|
priv->device = &pdev->dev;
|
|
priv->dev = ndev;
|
|
priv->msg_enable = netif_msg_init(debug, default_msg_level);
|
|
|
|
of_id = of_match_device(altera_tse_ids, &pdev->dev);
|
|
|
|
if (of_id)
|
|
priv->dmaops = (struct altera_dmaops *)of_id->data;
|
|
|
|
|
|
if (priv->dmaops &&
|
|
priv->dmaops->altera_dtype == ALTERA_DTYPE_SGDMA) {
|
|
/* Get the mapped address to the SGDMA descriptor memory */
|
|
ret = request_and_map(pdev, "s1", &dma_res, &descmap);
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
/* Start of that memory is for transmit descriptors */
|
|
priv->tx_dma_desc = descmap;
|
|
|
|
/* First half is for tx descriptors, other half for tx */
|
|
priv->txdescmem = resource_size(dma_res)/2;
|
|
|
|
priv->txdescmem_busaddr = (dma_addr_t)dma_res->start;
|
|
|
|
priv->rx_dma_desc = (void __iomem *)((uintptr_t)(descmap +
|
|
priv->txdescmem));
|
|
priv->rxdescmem = resource_size(dma_res)/2;
|
|
priv->rxdescmem_busaddr = dma_res->start;
|
|
priv->rxdescmem_busaddr += priv->txdescmem;
|
|
|
|
if (upper_32_bits(priv->rxdescmem_busaddr)) {
|
|
dev_dbg(priv->device,
|
|
"SGDMA bus addresses greater than 32-bits\n");
|
|
ret = -EINVAL;
|
|
goto err_free_netdev;
|
|
}
|
|
if (upper_32_bits(priv->txdescmem_busaddr)) {
|
|
dev_dbg(priv->device,
|
|
"SGDMA bus addresses greater than 32-bits\n");
|
|
ret = -EINVAL;
|
|
goto err_free_netdev;
|
|
}
|
|
} else if (priv->dmaops &&
|
|
priv->dmaops->altera_dtype == ALTERA_DTYPE_MSGDMA) {
|
|
ret = request_and_map(pdev, "rx_resp", &dma_res,
|
|
&priv->rx_dma_resp);
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
ret = request_and_map(pdev, "tx_desc", &dma_res,
|
|
&priv->tx_dma_desc);
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
priv->txdescmem = resource_size(dma_res);
|
|
priv->txdescmem_busaddr = dma_res->start;
|
|
|
|
ret = request_and_map(pdev, "rx_desc", &dma_res,
|
|
&priv->rx_dma_desc);
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
priv->rxdescmem = resource_size(dma_res);
|
|
priv->rxdescmem_busaddr = dma_res->start;
|
|
|
|
} else {
|
|
goto err_free_netdev;
|
|
}
|
|
|
|
if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask)))
|
|
dma_set_coherent_mask(priv->device,
|
|
DMA_BIT_MASK(priv->dmaops->dmamask));
|
|
else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32)))
|
|
dma_set_coherent_mask(priv->device, DMA_BIT_MASK(32));
|
|
else
|
|
goto err_free_netdev;
|
|
|
|
/* MAC address space */
|
|
ret = request_and_map(pdev, "control_port", &control_port,
|
|
(void __iomem **)&priv->mac_dev);
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
/* xSGDMA Rx Dispatcher address space */
|
|
ret = request_and_map(pdev, "rx_csr", &dma_res,
|
|
&priv->rx_dma_csr);
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
|
|
/* xSGDMA Tx Dispatcher address space */
|
|
ret = request_and_map(pdev, "tx_csr", &dma_res,
|
|
&priv->tx_dma_csr);
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
|
|
/* Rx IRQ */
|
|
priv->rx_irq = platform_get_irq_byname(pdev, "rx_irq");
|
|
if (priv->rx_irq == -ENXIO) {
|
|
dev_err(&pdev->dev, "cannot obtain Rx IRQ\n");
|
|
ret = -ENXIO;
|
|
goto err_free_netdev;
|
|
}
|
|
|
|
/* Tx IRQ */
|
|
priv->tx_irq = platform_get_irq_byname(pdev, "tx_irq");
|
|
if (priv->tx_irq == -ENXIO) {
|
|
dev_err(&pdev->dev, "cannot obtain Tx IRQ\n");
|
|
ret = -ENXIO;
|
|
goto err_free_netdev;
|
|
}
|
|
|
|
/* get FIFO depths from device tree */
|
|
if (of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth",
|
|
&priv->rx_fifo_depth)) {
|
|
dev_err(&pdev->dev, "cannot obtain rx-fifo-depth\n");
|
|
ret = -ENXIO;
|
|
goto err_free_netdev;
|
|
}
|
|
|
|
if (of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth",
|
|
&priv->tx_fifo_depth)) {
|
|
dev_err(&pdev->dev, "cannot obtain tx-fifo-depth\n");
|
|
ret = -ENXIO;
|
|
goto err_free_netdev;
|
|
}
|
|
|
|
/* get hash filter settings for this instance */
|
|
priv->hash_filter =
|
|
of_property_read_bool(pdev->dev.of_node,
|
|
"altr,has-hash-multicast-filter");
|
|
|
|
/* Set hash filter to not set for now until the
|
|
* multicast filter receive issue is debugged
|
|
*/
|
|
priv->hash_filter = 0;
|
|
|
|
/* get supplemental address settings for this instance */
|
|
priv->added_unicast =
|
|
of_property_read_bool(pdev->dev.of_node,
|
|
"altr,has-supplementary-unicast");
|
|
|
|
priv->dev->min_mtu = ETH_ZLEN + ETH_FCS_LEN;
|
|
/* Max MTU is 1500, ETH_DATA_LEN */
|
|
priv->dev->max_mtu = ETH_DATA_LEN;
|
|
|
|
/* Get the max mtu from the device tree. Note that the
|
|
* "max-frame-size" parameter is actually max mtu. Definition
|
|
* in the ePAPR v1.1 spec and usage differ, so go with usage.
|
|
*/
|
|
of_property_read_u32(pdev->dev.of_node, "max-frame-size",
|
|
&priv->dev->max_mtu);
|
|
|
|
/* The DMA buffer size already accounts for an alignment bias
|
|
* to avoid unaligned access exceptions for the NIOS processor,
|
|
*/
|
|
priv->rx_dma_buf_sz = ALTERA_RXDMABUFFER_SIZE;
|
|
|
|
/* get default MAC address from device tree */
|
|
macaddr = of_get_mac_address(pdev->dev.of_node);
|
|
if (macaddr)
|
|
ether_addr_copy(ndev->dev_addr, macaddr);
|
|
else
|
|
eth_hw_addr_random(ndev);
|
|
|
|
/* get phy addr and create mdio */
|
|
ret = altera_tse_phy_get_addr_mdio_create(ndev);
|
|
|
|
if (ret)
|
|
goto err_free_netdev;
|
|
|
|
/* initialize netdev */
|
|
ndev->mem_start = control_port->start;
|
|
ndev->mem_end = control_port->end;
|
|
ndev->netdev_ops = &altera_tse_netdev_ops;
|
|
altera_tse_set_ethtool_ops(ndev);
|
|
|
|
altera_tse_netdev_ops.ndo_set_rx_mode = tse_set_rx_mode;
|
|
|
|
if (priv->hash_filter)
|
|
altera_tse_netdev_ops.ndo_set_rx_mode =
|
|
tse_set_rx_mode_hashfilter;
|
|
|
|
/* Scatter/gather IO is not supported,
|
|
* so it is turned off
|
|
*/
|
|
ndev->hw_features &= ~NETIF_F_SG;
|
|
ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
|
|
|
|
/* VLAN offloading of tagging, stripping and filtering is not
|
|
* supported by hardware, but driver will accommodate the
|
|
* extra 4-byte VLAN tag for processing by upper layers
|
|
*/
|
|
ndev->features |= NETIF_F_HW_VLAN_CTAG_RX;
|
|
|
|
/* setup NAPI interface */
|
|
netif_napi_add(ndev, &priv->napi, tse_poll, NAPI_POLL_WEIGHT);
|
|
|
|
spin_lock_init(&priv->mac_cfg_lock);
|
|
spin_lock_init(&priv->tx_lock);
|
|
spin_lock_init(&priv->rxdma_irq_lock);
|
|
|
|
netif_carrier_off(ndev);
|
|
ret = register_netdev(ndev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register TSE net device\n");
|
|
goto err_register_netdev;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ndev);
|
|
|
|
priv->revision = ioread32(&priv->mac_dev->megacore_revision);
|
|
|
|
if (netif_msg_probe(priv))
|
|
dev_info(&pdev->dev, "Altera TSE MAC version %d.%d at 0x%08lx irq %d/%d\n",
|
|
(priv->revision >> 8) & 0xff,
|
|
priv->revision & 0xff,
|
|
(unsigned long) control_port->start, priv->rx_irq,
|
|
priv->tx_irq);
|
|
|
|
ret = init_phy(ndev);
|
|
if (ret != 0) {
|
|
netdev_err(ndev, "Cannot attach to PHY (error: %d)\n", ret);
|
|
goto err_init_phy;
|
|
}
|
|
return 0;
|
|
|
|
err_init_phy:
|
|
unregister_netdev(ndev);
|
|
err_register_netdev:
|
|
netif_napi_del(&priv->napi);
|
|
altera_tse_mdio_destroy(ndev);
|
|
err_free_netdev:
|
|
free_netdev(ndev);
|
|
return ret;
|
|
}
|
|
|
|
/* Remove Altera TSE MAC device
|
|
*/
|
|
static int altera_tse_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct altera_tse_private *priv = netdev_priv(ndev);
|
|
|
|
if (ndev->phydev) {
|
|
phy_disconnect(ndev->phydev);
|
|
|
|
if (of_phy_is_fixed_link(priv->device->of_node))
|
|
of_phy_deregister_fixed_link(priv->device->of_node);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
altera_tse_mdio_destroy(ndev);
|
|
unregister_netdev(ndev);
|
|
free_netdev(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct altera_dmaops altera_dtype_sgdma = {
|
|
.altera_dtype = ALTERA_DTYPE_SGDMA,
|
|
.dmamask = 32,
|
|
.reset_dma = sgdma_reset,
|
|
.enable_txirq = sgdma_enable_txirq,
|
|
.enable_rxirq = sgdma_enable_rxirq,
|
|
.disable_txirq = sgdma_disable_txirq,
|
|
.disable_rxirq = sgdma_disable_rxirq,
|
|
.clear_txirq = sgdma_clear_txirq,
|
|
.clear_rxirq = sgdma_clear_rxirq,
|
|
.tx_buffer = sgdma_tx_buffer,
|
|
.tx_completions = sgdma_tx_completions,
|
|
.add_rx_desc = sgdma_add_rx_desc,
|
|
.get_rx_status = sgdma_rx_status,
|
|
.init_dma = sgdma_initialize,
|
|
.uninit_dma = sgdma_uninitialize,
|
|
.start_rxdma = sgdma_start_rxdma,
|
|
};
|
|
|
|
static const struct altera_dmaops altera_dtype_msgdma = {
|
|
.altera_dtype = ALTERA_DTYPE_MSGDMA,
|
|
.dmamask = 64,
|
|
.reset_dma = msgdma_reset,
|
|
.enable_txirq = msgdma_enable_txirq,
|
|
.enable_rxirq = msgdma_enable_rxirq,
|
|
.disable_txirq = msgdma_disable_txirq,
|
|
.disable_rxirq = msgdma_disable_rxirq,
|
|
.clear_txirq = msgdma_clear_txirq,
|
|
.clear_rxirq = msgdma_clear_rxirq,
|
|
.tx_buffer = msgdma_tx_buffer,
|
|
.tx_completions = msgdma_tx_completions,
|
|
.add_rx_desc = msgdma_add_rx_desc,
|
|
.get_rx_status = msgdma_rx_status,
|
|
.init_dma = msgdma_initialize,
|
|
.uninit_dma = msgdma_uninitialize,
|
|
.start_rxdma = msgdma_start_rxdma,
|
|
};
|
|
|
|
static const struct of_device_id altera_tse_ids[] = {
|
|
{ .compatible = "altr,tse-msgdma-1.0", .data = &altera_dtype_msgdma, },
|
|
{ .compatible = "altr,tse-1.0", .data = &altera_dtype_sgdma, },
|
|
{ .compatible = "ALTR,tse-1.0", .data = &altera_dtype_sgdma, },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, altera_tse_ids);
|
|
|
|
static struct platform_driver altera_tse_driver = {
|
|
.probe = altera_tse_probe,
|
|
.remove = altera_tse_remove,
|
|
.suspend = NULL,
|
|
.resume = NULL,
|
|
.driver = {
|
|
.name = ALTERA_TSE_RESOURCE_NAME,
|
|
.of_match_table = altera_tse_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(altera_tse_driver);
|
|
|
|
MODULE_AUTHOR("Altera Corporation");
|
|
MODULE_DESCRIPTION("Altera Triple Speed Ethernet MAC driver");
|
|
MODULE_LICENSE("GPL v2");
|