246 lines
7.8 KiB
C
246 lines
7.8 KiB
C
/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/* Qualcomm Technologies, Inc. FSM9900 EMAC SGMII Controller driver.
|
|
*/
|
|
|
|
#include <linux/iopoll.h>
|
|
#include "emac.h"
|
|
|
|
/* EMAC_QSERDES register offsets */
|
|
#define EMAC_QSERDES_COM_SYS_CLK_CTRL 0x0000
|
|
#define EMAC_QSERDES_COM_PLL_CNTRL 0x0014
|
|
#define EMAC_QSERDES_COM_PLL_IP_SETI 0x0018
|
|
#define EMAC_QSERDES_COM_PLL_CP_SETI 0x0024
|
|
#define EMAC_QSERDES_COM_PLL_IP_SETP 0x0028
|
|
#define EMAC_QSERDES_COM_PLL_CP_SETP 0x002c
|
|
#define EMAC_QSERDES_COM_SYSCLK_EN_SEL 0x0038
|
|
#define EMAC_QSERDES_COM_RESETSM_CNTRL 0x0040
|
|
#define EMAC_QSERDES_COM_PLLLOCK_CMP1 0x0044
|
|
#define EMAC_QSERDES_COM_PLLLOCK_CMP2 0x0048
|
|
#define EMAC_QSERDES_COM_PLLLOCK_CMP3 0x004c
|
|
#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN 0x0050
|
|
#define EMAC_QSERDES_COM_DEC_START1 0x0064
|
|
#define EMAC_QSERDES_COM_DIV_FRAC_START1 0x0098
|
|
#define EMAC_QSERDES_COM_DIV_FRAC_START2 0x009c
|
|
#define EMAC_QSERDES_COM_DIV_FRAC_START3 0x00a0
|
|
#define EMAC_QSERDES_COM_DEC_START2 0x00a4
|
|
#define EMAC_QSERDES_COM_PLL_CRCTRL 0x00ac
|
|
#define EMAC_QSERDES_COM_RESET_SM 0x00bc
|
|
#define EMAC_QSERDES_TX_BIST_MODE_LANENO 0x0100
|
|
#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL 0x0108
|
|
#define EMAC_QSERDES_TX_TX_DRV_LVL 0x010c
|
|
#define EMAC_QSERDES_TX_LANE_MODE 0x0150
|
|
#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN 0x0170
|
|
#define EMAC_QSERDES_RX_CDR_CONTROL 0x0200
|
|
#define EMAC_QSERDES_RX_CDR_CONTROL2 0x0210
|
|
#define EMAC_QSERDES_RX_RX_EQ_GAIN12 0x0230
|
|
|
|
/* EMAC_SGMII register offsets */
|
|
#define EMAC_SGMII_PHY_SERDES_START 0x0000
|
|
#define EMAC_SGMII_PHY_CMN_PWR_CTRL 0x0004
|
|
#define EMAC_SGMII_PHY_RX_PWR_CTRL 0x0008
|
|
#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
|
|
#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
|
|
#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
|
|
#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
|
|
#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
|
|
|
|
#define PLL_IPSETI(x) ((x) & 0x3f)
|
|
|
|
#define PLL_CPSETI(x) ((x) & 0xff)
|
|
|
|
#define PLL_IPSETP(x) ((x) & 0x3f)
|
|
|
|
#define PLL_CPSETP(x) ((x) & 0x1f)
|
|
|
|
#define PLL_RCTRL(x) (((x) & 0xf) << 4)
|
|
#define PLL_CCTRL(x) ((x) & 0xf)
|
|
|
|
#define LANE_MODE(x) ((x) & 0x1f)
|
|
|
|
#define SYSCLK_CM BIT(4)
|
|
#define SYSCLK_AC_COUPLE BIT(3)
|
|
|
|
#define OCP_EN BIT(5)
|
|
#define PLL_DIV_FFEN BIT(2)
|
|
#define PLL_DIV_ORD BIT(1)
|
|
|
|
#define SYSCLK_SEL_CMOS BIT(3)
|
|
|
|
#define FRQ_TUNE_MODE BIT(4)
|
|
|
|
#define PLLLOCK_CMP_EN BIT(0)
|
|
|
|
#define DEC_START1_MUX BIT(7)
|
|
#define DEC_START1(x) ((x) & 0x7f)
|
|
|
|
#define DIV_FRAC_START_MUX BIT(7)
|
|
#define DIV_FRAC_START(x) ((x) & 0x7f)
|
|
|
|
#define DIV_FRAC_START3_MUX BIT(4)
|
|
#define DIV_FRAC_START3(x) ((x) & 0xf)
|
|
|
|
#define DEC_START2_MUX BIT(1)
|
|
#define DEC_START2 BIT(0)
|
|
|
|
#define READY BIT(5)
|
|
|
|
#define TX_EMP_POST1_LVL_MUX BIT(5)
|
|
#define TX_EMP_POST1_LVL(x) ((x) & 0x1f)
|
|
|
|
#define TX_DRV_LVL_MUX BIT(4)
|
|
#define TX_DRV_LVL(x) ((x) & 0xf)
|
|
|
|
#define EMP_EN_MUX BIT(1)
|
|
#define EMP_EN BIT(0)
|
|
|
|
#define SECONDORDERENABLE BIT(6)
|
|
#define FIRSTORDER_THRESH(x) (((x) & 0x7) << 3)
|
|
#define SECONDORDERGAIN(x) ((x) & 0x7)
|
|
|
|
#define RX_EQ_GAIN2(x) (((x) & 0xf) << 4)
|
|
#define RX_EQ_GAIN1(x) ((x) & 0xf)
|
|
|
|
#define SERDES_START BIT(0)
|
|
|
|
#define BIAS_EN BIT(6)
|
|
#define PLL_EN BIT(5)
|
|
#define SYSCLK_EN BIT(4)
|
|
#define CLKBUF_L_EN BIT(3)
|
|
#define PLL_TXCLK_EN BIT(1)
|
|
#define PLL_RXCLK_EN BIT(0)
|
|
|
|
#define L0_RX_SIGDET_EN BIT(7)
|
|
#define L0_RX_TERM_MODE(x) (((x) & 3) << 4)
|
|
#define L0_RX_I_EN BIT(1)
|
|
|
|
#define L0_TX_EN BIT(5)
|
|
#define L0_CLKBUF_EN BIT(4)
|
|
#define L0_TRAN_BIAS_EN BIT(1)
|
|
|
|
#define L0_RX_EQUALIZE_ENABLE BIT(6)
|
|
#define L0_RESET_TSYNC_EN BIT(4)
|
|
#define L0_DRV_LVL(x) ((x) & 0xf)
|
|
|
|
#define PWRDN_B BIT(0)
|
|
#define CDR_MAX_CNT(x) ((x) & 0xff)
|
|
|
|
#define PLLLOCK_CMP(x) ((x) & 0xff)
|
|
|
|
#define SERDES_START_WAIT_TIMES 100
|
|
|
|
struct emac_reg_write {
|
|
unsigned int offset;
|
|
u32 val;
|
|
};
|
|
|
|
static void emac_reg_write_all(void __iomem *base,
|
|
const struct emac_reg_write *itr, size_t size)
|
|
{
|
|
size_t i;
|
|
|
|
for (i = 0; i < size; ++itr, ++i)
|
|
writel(itr->val, base + itr->offset);
|
|
}
|
|
|
|
static const struct emac_reg_write physical_coding_sublayer_programming[] = {
|
|
{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
|
|
{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
|
|
{EMAC_SGMII_PHY_CMN_PWR_CTRL,
|
|
BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
|
|
{EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
|
|
{EMAC_SGMII_PHY_RX_PWR_CTRL,
|
|
L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
|
|
{EMAC_SGMII_PHY_CMN_PWR_CTRL,
|
|
BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
|
|
PLL_RXCLK_EN},
|
|
{EMAC_SGMII_PHY_LANE_CTRL1,
|
|
L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
|
|
};
|
|
|
|
static const struct emac_reg_write sysclk_refclk_setting[] = {
|
|
{EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
|
|
{EMAC_QSERDES_COM_SYS_CLK_CTRL, SYSCLK_CM | SYSCLK_AC_COUPLE},
|
|
};
|
|
|
|
static const struct emac_reg_write pll_setting[] = {
|
|
{EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
|
|
{EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
|
|
{EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
|
|
{EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
|
|
{EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
|
|
{EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
|
|
{EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
|
|
{EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
|
|
{EMAC_QSERDES_COM_DIV_FRAC_START1,
|
|
DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
|
|
{EMAC_QSERDES_COM_DIV_FRAC_START2,
|
|
DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
|
|
{EMAC_QSERDES_COM_DIV_FRAC_START3,
|
|
DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
|
|
{EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
|
|
{EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
|
|
{EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
|
|
{EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
|
|
{EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
|
|
};
|
|
|
|
static const struct emac_reg_write cdr_setting[] = {
|
|
{EMAC_QSERDES_RX_CDR_CONTROL,
|
|
SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
|
|
{EMAC_QSERDES_RX_CDR_CONTROL2,
|
|
SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
|
|
};
|
|
|
|
static const struct emac_reg_write tx_rx_setting[] = {
|
|
{EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
|
|
{EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
|
|
{EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
|
|
{EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
|
|
TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
|
|
{EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
|
|
{EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
|
|
};
|
|
|
|
int emac_sgmii_init_fsm9900(struct emac_adapter *adpt)
|
|
{
|
|
struct emac_sgmii *phy = &adpt->phy;
|
|
unsigned int i;
|
|
|
|
emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
|
|
ARRAY_SIZE(physical_coding_sublayer_programming));
|
|
emac_reg_write_all(phy->base, sysclk_refclk_setting,
|
|
ARRAY_SIZE(sysclk_refclk_setting));
|
|
emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
|
|
emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
|
|
emac_reg_write_all(phy->base, tx_rx_setting, ARRAY_SIZE(tx_rx_setting));
|
|
|
|
/* Power up the Ser/Des engine */
|
|
writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
|
|
|
|
for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
|
|
if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
|
|
break;
|
|
usleep_range(100, 200);
|
|
}
|
|
|
|
if (i == SERDES_START_WAIT_TIMES) {
|
|
netdev_err(adpt->netdev, "error: ser/des failed to start\n");
|
|
return -EIO;
|
|
}
|
|
/* Mask out all the SGMII Interrupt */
|
|
writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
|
|
|
|
return 0;
|
|
}
|