6db4831e98
Android 14
5024 lines
134 KiB
C
5024 lines
134 KiB
C
/*
|
|
* QLogic qlge NIC HBA Driver
|
|
* Copyright (c) 2003-2008 QLogic Corporation
|
|
* See LICENSE.qlge for copyright and licensing details.
|
|
* Author: Linux qlge network device driver by
|
|
* Ron Mercer <ron.mercer@qlogic.com>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/mempool.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/ipv6.h>
|
|
#include <net/ipv6.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/prefetch.h>
|
|
#include <net/ip6_checksum.h>
|
|
|
|
#include "qlge.h"
|
|
|
|
char qlge_driver_name[] = DRV_NAME;
|
|
const char qlge_driver_version[] = DRV_VERSION;
|
|
|
|
MODULE_AUTHOR("Ron Mercer <ron.mercer@qlogic.com>");
|
|
MODULE_DESCRIPTION(DRV_STRING " ");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static const u32 default_msg =
|
|
NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK |
|
|
/* NETIF_MSG_TIMER | */
|
|
NETIF_MSG_IFDOWN |
|
|
NETIF_MSG_IFUP |
|
|
NETIF_MSG_RX_ERR |
|
|
NETIF_MSG_TX_ERR |
|
|
/* NETIF_MSG_TX_QUEUED | */
|
|
/* NETIF_MSG_INTR | NETIF_MSG_TX_DONE | NETIF_MSG_RX_STATUS | */
|
|
/* NETIF_MSG_PKTDATA | */
|
|
NETIF_MSG_HW | NETIF_MSG_WOL | 0;
|
|
|
|
static int debug = -1; /* defaults above */
|
|
module_param(debug, int, 0664);
|
|
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
|
|
|
|
#define MSIX_IRQ 0
|
|
#define MSI_IRQ 1
|
|
#define LEG_IRQ 2
|
|
static int qlge_irq_type = MSIX_IRQ;
|
|
module_param(qlge_irq_type, int, 0664);
|
|
MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
|
|
|
|
static int qlge_mpi_coredump;
|
|
module_param(qlge_mpi_coredump, int, 0);
|
|
MODULE_PARM_DESC(qlge_mpi_coredump,
|
|
"Option to enable MPI firmware dump. "
|
|
"Default is OFF - Do Not allocate memory. ");
|
|
|
|
static int qlge_force_coredump;
|
|
module_param(qlge_force_coredump, int, 0);
|
|
MODULE_PARM_DESC(qlge_force_coredump,
|
|
"Option to allow force of firmware core dump. "
|
|
"Default is OFF - Do not allow.");
|
|
|
|
static const struct pci_device_id qlge_pci_tbl[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8000)},
|
|
/* required last entry */
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, qlge_pci_tbl);
|
|
|
|
static int ql_wol(struct ql_adapter *);
|
|
static void qlge_set_multicast_list(struct net_device *);
|
|
static int ql_adapter_down(struct ql_adapter *);
|
|
static int ql_adapter_up(struct ql_adapter *);
|
|
|
|
/* This hardware semaphore causes exclusive access to
|
|
* resources shared between the NIC driver, MPI firmware,
|
|
* FCOE firmware and the FC driver.
|
|
*/
|
|
static int ql_sem_trylock(struct ql_adapter *qdev, u32 sem_mask)
|
|
{
|
|
u32 sem_bits = 0;
|
|
|
|
switch (sem_mask) {
|
|
case SEM_XGMAC0_MASK:
|
|
sem_bits = SEM_SET << SEM_XGMAC0_SHIFT;
|
|
break;
|
|
case SEM_XGMAC1_MASK:
|
|
sem_bits = SEM_SET << SEM_XGMAC1_SHIFT;
|
|
break;
|
|
case SEM_ICB_MASK:
|
|
sem_bits = SEM_SET << SEM_ICB_SHIFT;
|
|
break;
|
|
case SEM_MAC_ADDR_MASK:
|
|
sem_bits = SEM_SET << SEM_MAC_ADDR_SHIFT;
|
|
break;
|
|
case SEM_FLASH_MASK:
|
|
sem_bits = SEM_SET << SEM_FLASH_SHIFT;
|
|
break;
|
|
case SEM_PROBE_MASK:
|
|
sem_bits = SEM_SET << SEM_PROBE_SHIFT;
|
|
break;
|
|
case SEM_RT_IDX_MASK:
|
|
sem_bits = SEM_SET << SEM_RT_IDX_SHIFT;
|
|
break;
|
|
case SEM_PROC_REG_MASK:
|
|
sem_bits = SEM_SET << SEM_PROC_REG_SHIFT;
|
|
break;
|
|
default:
|
|
netif_alert(qdev, probe, qdev->ndev, "bad Semaphore mask!.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ql_write32(qdev, SEM, sem_bits | sem_mask);
|
|
return !(ql_read32(qdev, SEM) & sem_bits);
|
|
}
|
|
|
|
int ql_sem_spinlock(struct ql_adapter *qdev, u32 sem_mask)
|
|
{
|
|
unsigned int wait_count = 30;
|
|
do {
|
|
if (!ql_sem_trylock(qdev, sem_mask))
|
|
return 0;
|
|
udelay(100);
|
|
} while (--wait_count);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
void ql_sem_unlock(struct ql_adapter *qdev, u32 sem_mask)
|
|
{
|
|
ql_write32(qdev, SEM, sem_mask);
|
|
ql_read32(qdev, SEM); /* flush */
|
|
}
|
|
|
|
/* This function waits for a specific bit to come ready
|
|
* in a given register. It is used mostly by the initialize
|
|
* process, but is also used in kernel thread API such as
|
|
* netdev->set_multi, netdev->set_mac_address, netdev->vlan_rx_add_vid.
|
|
*/
|
|
int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 err_bit)
|
|
{
|
|
u32 temp;
|
|
int count = UDELAY_COUNT;
|
|
|
|
while (count) {
|
|
temp = ql_read32(qdev, reg);
|
|
|
|
/* check for errors */
|
|
if (temp & err_bit) {
|
|
netif_alert(qdev, probe, qdev->ndev,
|
|
"register 0x%.08x access error, value = 0x%.08x!.\n",
|
|
reg, temp);
|
|
return -EIO;
|
|
} else if (temp & bit)
|
|
return 0;
|
|
udelay(UDELAY_DELAY);
|
|
count--;
|
|
}
|
|
netif_alert(qdev, probe, qdev->ndev,
|
|
"Timed out waiting for reg %x to come ready.\n", reg);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* The CFG register is used to download TX and RX control blocks
|
|
* to the chip. This function waits for an operation to complete.
|
|
*/
|
|
static int ql_wait_cfg(struct ql_adapter *qdev, u32 bit)
|
|
{
|
|
int count = UDELAY_COUNT;
|
|
u32 temp;
|
|
|
|
while (count) {
|
|
temp = ql_read32(qdev, CFG);
|
|
if (temp & CFG_LE)
|
|
return -EIO;
|
|
if (!(temp & bit))
|
|
return 0;
|
|
udelay(UDELAY_DELAY);
|
|
count--;
|
|
}
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
|
|
/* Used to issue init control blocks to hw. Maps control block,
|
|
* sets address, triggers download, waits for completion.
|
|
*/
|
|
int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
|
|
u16 q_id)
|
|
{
|
|
u64 map;
|
|
int status = 0;
|
|
int direction;
|
|
u32 mask;
|
|
u32 value;
|
|
|
|
direction =
|
|
(bit & (CFG_LRQ | CFG_LR | CFG_LCQ)) ? PCI_DMA_TODEVICE :
|
|
PCI_DMA_FROMDEVICE;
|
|
|
|
map = pci_map_single(qdev->pdev, ptr, size, direction);
|
|
if (pci_dma_mapping_error(qdev->pdev, map)) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Couldn't map DMA area.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
|
|
if (status)
|
|
return status;
|
|
|
|
status = ql_wait_cfg(qdev, bit);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Timed out waiting for CFG to come ready.\n");
|
|
goto exit;
|
|
}
|
|
|
|
ql_write32(qdev, ICB_L, (u32) map);
|
|
ql_write32(qdev, ICB_H, (u32) (map >> 32));
|
|
|
|
mask = CFG_Q_MASK | (bit << 16);
|
|
value = bit | (q_id << CFG_Q_SHIFT);
|
|
ql_write32(qdev, CFG, (mask | value));
|
|
|
|
/*
|
|
* Wait for the bit to clear after signaling hw.
|
|
*/
|
|
status = ql_wait_cfg(qdev, bit);
|
|
exit:
|
|
ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
|
|
pci_unmap_single(qdev->pdev, map, size, direction);
|
|
return status;
|
|
}
|
|
|
|
/* Get a specific MAC address from the CAM. Used for debug and reg dump. */
|
|
int ql_get_mac_addr_reg(struct ql_adapter *qdev, u32 type, u16 index,
|
|
u32 *value)
|
|
{
|
|
u32 offset = 0;
|
|
int status;
|
|
|
|
switch (type) {
|
|
case MAC_ADDR_TYPE_MULTI_MAC:
|
|
case MAC_ADDR_TYPE_CAM_MAC:
|
|
{
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
|
|
(index << MAC_ADDR_IDX_SHIFT) | /* index */
|
|
MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MR, 0);
|
|
if (status)
|
|
goto exit;
|
|
*value++ = ql_read32(qdev, MAC_ADDR_DATA);
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
|
|
(index << MAC_ADDR_IDX_SHIFT) | /* index */
|
|
MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MR, 0);
|
|
if (status)
|
|
goto exit;
|
|
*value++ = ql_read32(qdev, MAC_ADDR_DATA);
|
|
if (type == MAC_ADDR_TYPE_CAM_MAC) {
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
|
|
(index << MAC_ADDR_IDX_SHIFT) | /* index */
|
|
MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */
|
|
status =
|
|
ql_wait_reg_rdy(qdev, MAC_ADDR_IDX,
|
|
MAC_ADDR_MR, 0);
|
|
if (status)
|
|
goto exit;
|
|
*value++ = ql_read32(qdev, MAC_ADDR_DATA);
|
|
}
|
|
break;
|
|
}
|
|
case MAC_ADDR_TYPE_VLAN:
|
|
case MAC_ADDR_TYPE_MULTI_FLTR:
|
|
default:
|
|
netif_crit(qdev, ifup, qdev->ndev,
|
|
"Address type %d not yet supported.\n", type);
|
|
status = -EPERM;
|
|
}
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
/* Set up a MAC, multicast or VLAN address for the
|
|
* inbound frame matching.
|
|
*/
|
|
static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
|
|
u16 index)
|
|
{
|
|
u32 offset = 0;
|
|
int status = 0;
|
|
|
|
switch (type) {
|
|
case MAC_ADDR_TYPE_MULTI_MAC:
|
|
{
|
|
u32 upper = (addr[0] << 8) | addr[1];
|
|
u32 lower = (addr[2] << 24) | (addr[3] << 16) |
|
|
(addr[4] << 8) | (addr[5]);
|
|
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
|
|
(index << MAC_ADDR_IDX_SHIFT) |
|
|
type | MAC_ADDR_E);
|
|
ql_write32(qdev, MAC_ADDR_DATA, lower);
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
|
|
(index << MAC_ADDR_IDX_SHIFT) |
|
|
type | MAC_ADDR_E);
|
|
|
|
ql_write32(qdev, MAC_ADDR_DATA, upper);
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
break;
|
|
}
|
|
case MAC_ADDR_TYPE_CAM_MAC:
|
|
{
|
|
u32 cam_output;
|
|
u32 upper = (addr[0] << 8) | addr[1];
|
|
u32 lower =
|
|
(addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
|
|
(addr[5]);
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
|
|
(index << MAC_ADDR_IDX_SHIFT) | /* index */
|
|
type); /* type */
|
|
ql_write32(qdev, MAC_ADDR_DATA, lower);
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
|
|
(index << MAC_ADDR_IDX_SHIFT) | /* index */
|
|
type); /* type */
|
|
ql_write32(qdev, MAC_ADDR_DATA, upper);
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, (offset) | /* offset */
|
|
(index << MAC_ADDR_IDX_SHIFT) | /* index */
|
|
type); /* type */
|
|
/* This field should also include the queue id
|
|
and possibly the function id. Right now we hardcode
|
|
the route field to NIC core.
|
|
*/
|
|
cam_output = (CAM_OUT_ROUTE_NIC |
|
|
(qdev->
|
|
func << CAM_OUT_FUNC_SHIFT) |
|
|
(0 << CAM_OUT_CQ_ID_SHIFT));
|
|
if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
|
|
cam_output |= CAM_OUT_RV;
|
|
/* route to NIC core */
|
|
ql_write32(qdev, MAC_ADDR_DATA, cam_output);
|
|
break;
|
|
}
|
|
case MAC_ADDR_TYPE_VLAN:
|
|
{
|
|
u32 enable_bit = *((u32 *) &addr[0]);
|
|
/* For VLAN, the addr actually holds a bit that
|
|
* either enables or disables the vlan id we are
|
|
* addressing. It's either MAC_ADDR_E on or off.
|
|
* That's bit-27 we're talking about.
|
|
*/
|
|
status =
|
|
ql_wait_reg_rdy(qdev,
|
|
MAC_ADDR_IDX, MAC_ADDR_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
ql_write32(qdev, MAC_ADDR_IDX, offset | /* offset */
|
|
(index << MAC_ADDR_IDX_SHIFT) | /* index */
|
|
type | /* type */
|
|
enable_bit); /* enable/disable */
|
|
break;
|
|
}
|
|
case MAC_ADDR_TYPE_MULTI_FLTR:
|
|
default:
|
|
netif_crit(qdev, ifup, qdev->ndev,
|
|
"Address type %d not yet supported.\n", type);
|
|
status = -EPERM;
|
|
}
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
/* Set or clear MAC address in hardware. We sometimes
|
|
* have to clear it to prevent wrong frame routing
|
|
* especially in a bonding environment.
|
|
*/
|
|
static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
|
|
{
|
|
int status;
|
|
char zero_mac_addr[ETH_ALEN];
|
|
char *addr;
|
|
|
|
if (set) {
|
|
addr = &qdev->current_mac_addr[0];
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"Set Mac addr %pM\n", addr);
|
|
} else {
|
|
eth_zero_addr(zero_mac_addr);
|
|
addr = &zero_mac_addr[0];
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"Clearing MAC address\n");
|
|
}
|
|
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (status)
|
|
return status;
|
|
status = ql_set_mac_addr_reg(qdev, (u8 *) addr,
|
|
MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
|
|
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (status)
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init mac address.\n");
|
|
return status;
|
|
}
|
|
|
|
void ql_link_on(struct ql_adapter *qdev)
|
|
{
|
|
netif_err(qdev, link, qdev->ndev, "Link is up.\n");
|
|
netif_carrier_on(qdev->ndev);
|
|
ql_set_mac_addr(qdev, 1);
|
|
}
|
|
|
|
void ql_link_off(struct ql_adapter *qdev)
|
|
{
|
|
netif_err(qdev, link, qdev->ndev, "Link is down.\n");
|
|
netif_carrier_off(qdev->ndev);
|
|
ql_set_mac_addr(qdev, 0);
|
|
}
|
|
|
|
/* Get a specific frame routing value from the CAM.
|
|
* Used for debug and reg dump.
|
|
*/
|
|
int ql_get_routing_reg(struct ql_adapter *qdev, u32 index, u32 *value)
|
|
{
|
|
int status = 0;
|
|
|
|
status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
|
|
ql_write32(qdev, RT_IDX,
|
|
RT_IDX_TYPE_NICQ | RT_IDX_RS | (index << RT_IDX_IDX_SHIFT));
|
|
status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MR, 0);
|
|
if (status)
|
|
goto exit;
|
|
*value = ql_read32(qdev, RT_DATA);
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
/* The NIC function for this chip has 16 routing indexes. Each one can be used
|
|
* to route different frame types to various inbound queues. We send broadcast/
|
|
* multicast/error frames to the default queue for slow handling,
|
|
* and CAM hit/RSS frames to the fast handling queues.
|
|
*/
|
|
static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask,
|
|
int enable)
|
|
{
|
|
int status = -EINVAL; /* Return error if no mask match. */
|
|
u32 value = 0;
|
|
|
|
switch (mask) {
|
|
case RT_IDX_CAM_HIT:
|
|
{
|
|
value = RT_IDX_DST_CAM_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_CAM_HIT_SLOT << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
case RT_IDX_VALID: /* Promiscuous Mode frames. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_PROMISCUOUS_SLOT << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
case RT_IDX_ERR: /* Pass up MAC,IP,TCP/UDP error frames. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_ALL_ERR_SLOT << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
case RT_IDX_IP_CSUM_ERR: /* Pass up IP CSUM error frames. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_IP_CSUM_ERR_SLOT <<
|
|
RT_IDX_IDX_SHIFT); /* index */
|
|
break;
|
|
}
|
|
case RT_IDX_TU_CSUM_ERR: /* Pass up TCP/UDP CSUM error frames. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_TCP_UDP_CSUM_ERR_SLOT <<
|
|
RT_IDX_IDX_SHIFT); /* index */
|
|
break;
|
|
}
|
|
case RT_IDX_BCAST: /* Pass up Broadcast frames to default Q. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_BCAST_SLOT << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
case RT_IDX_MCAST: /* Pass up All Multicast frames. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
case RT_IDX_RSS_MATCH: /* Pass up matched RSS frames. */
|
|
{
|
|
value = RT_IDX_DST_RSS | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(RT_IDX_RSS_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
case 0: /* Clear the E-bit on an entry. */
|
|
{
|
|
value = RT_IDX_DST_DFLT_Q | /* dest */
|
|
RT_IDX_TYPE_NICQ | /* type */
|
|
(index << RT_IDX_IDX_SHIFT);/* index */
|
|
break;
|
|
}
|
|
default:
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Mask type %d not yet supported.\n", mask);
|
|
status = -EPERM;
|
|
goto exit;
|
|
}
|
|
|
|
if (value) {
|
|
status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0);
|
|
if (status)
|
|
goto exit;
|
|
value |= (enable ? RT_IDX_E : 0);
|
|
ql_write32(qdev, RT_IDX, value);
|
|
ql_write32(qdev, RT_DATA, enable ? mask : 0);
|
|
}
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
static void ql_enable_interrupts(struct ql_adapter *qdev)
|
|
{
|
|
ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16) | INTR_EN_EI);
|
|
}
|
|
|
|
static void ql_disable_interrupts(struct ql_adapter *qdev)
|
|
{
|
|
ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16));
|
|
}
|
|
|
|
/* If we're running with multiple MSI-X vectors then we enable on the fly.
|
|
* Otherwise, we may have multiple outstanding workers and don't want to
|
|
* enable until the last one finishes. In this case, the irq_cnt gets
|
|
* incremented every time we queue a worker and decremented every time
|
|
* a worker finishes. Once it hits zero we enable the interrupt.
|
|
*/
|
|
u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
|
|
{
|
|
u32 var = 0;
|
|
unsigned long hw_flags = 0;
|
|
struct intr_context *ctx = qdev->intr_context + intr;
|
|
|
|
if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags) && intr)) {
|
|
/* Always enable if we're MSIX multi interrupts and
|
|
* it's not the default (zeroeth) interrupt.
|
|
*/
|
|
ql_write32(qdev, INTR_EN,
|
|
ctx->intr_en_mask);
|
|
var = ql_read32(qdev, STS);
|
|
return var;
|
|
}
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
if (atomic_dec_and_test(&ctx->irq_cnt)) {
|
|
ql_write32(qdev, INTR_EN,
|
|
ctx->intr_en_mask);
|
|
var = ql_read32(qdev, STS);
|
|
}
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return var;
|
|
}
|
|
|
|
static u32 ql_disable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
|
|
{
|
|
u32 var = 0;
|
|
struct intr_context *ctx;
|
|
|
|
/* HW disables for us if we're MSIX multi interrupts and
|
|
* it's not the default (zeroeth) interrupt.
|
|
*/
|
|
if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags) && intr))
|
|
return 0;
|
|
|
|
ctx = qdev->intr_context + intr;
|
|
spin_lock(&qdev->hw_lock);
|
|
if (!atomic_read(&ctx->irq_cnt)) {
|
|
ql_write32(qdev, INTR_EN,
|
|
ctx->intr_dis_mask);
|
|
var = ql_read32(qdev, STS);
|
|
}
|
|
atomic_inc(&ctx->irq_cnt);
|
|
spin_unlock(&qdev->hw_lock);
|
|
return var;
|
|
}
|
|
|
|
static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
for (i = 0; i < qdev->intr_count; i++) {
|
|
/* The enable call does a atomic_dec_and_test
|
|
* and enables only if the result is zero.
|
|
* So we precharge it here.
|
|
*/
|
|
if (unlikely(!test_bit(QL_MSIX_ENABLED, &qdev->flags) ||
|
|
i == 0))
|
|
atomic_set(&qdev->intr_context[i].irq_cnt, 1);
|
|
ql_enable_completion_interrupt(qdev, i);
|
|
}
|
|
|
|
}
|
|
|
|
static int ql_validate_flash(struct ql_adapter *qdev, u32 size, const char *str)
|
|
{
|
|
int status, i;
|
|
u16 csum = 0;
|
|
__le16 *flash = (__le16 *)&qdev->flash;
|
|
|
|
status = strncmp((char *)&qdev->flash, str, 4);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Invalid flash signature.\n");
|
|
return status;
|
|
}
|
|
|
|
for (i = 0; i < size; i++)
|
|
csum += le16_to_cpu(*flash++);
|
|
|
|
if (csum)
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Invalid flash checksum, csum = 0x%.04x.\n", csum);
|
|
|
|
return csum;
|
|
}
|
|
|
|
static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data)
|
|
{
|
|
int status = 0;
|
|
/* wait for reg to come ready */
|
|
status = ql_wait_reg_rdy(qdev,
|
|
FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
|
|
if (status)
|
|
goto exit;
|
|
/* set up for reg read */
|
|
ql_write32(qdev, FLASH_ADDR, FLASH_ADDR_R | offset);
|
|
/* wait for reg to come ready */
|
|
status = ql_wait_reg_rdy(qdev,
|
|
FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
|
|
if (status)
|
|
goto exit;
|
|
/* This data is stored on flash as an array of
|
|
* __le32. Since ql_read32() returns cpu endian
|
|
* we need to swap it back.
|
|
*/
|
|
*data = cpu_to_le32(ql_read32(qdev, FLASH_DATA));
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
static int ql_get_8000_flash_params(struct ql_adapter *qdev)
|
|
{
|
|
u32 i, size;
|
|
int status;
|
|
__le32 *p = (__le32 *)&qdev->flash;
|
|
u32 offset;
|
|
u8 mac_addr[6];
|
|
|
|
/* Get flash offset for function and adjust
|
|
* for dword access.
|
|
*/
|
|
if (!qdev->port)
|
|
offset = FUNC0_FLASH_OFFSET / sizeof(u32);
|
|
else
|
|
offset = FUNC1_FLASH_OFFSET / sizeof(u32);
|
|
|
|
if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
|
|
return -ETIMEDOUT;
|
|
|
|
size = sizeof(struct flash_params_8000) / sizeof(u32);
|
|
for (i = 0; i < size; i++, p++) {
|
|
status = ql_read_flash_word(qdev, i+offset, p);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Error reading flash.\n");
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
status = ql_validate_flash(qdev,
|
|
sizeof(struct flash_params_8000) / sizeof(u16),
|
|
"8000");
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Invalid flash.\n");
|
|
status = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
/* Extract either manufacturer or BOFM modified
|
|
* MAC address.
|
|
*/
|
|
if (qdev->flash.flash_params_8000.data_type1 == 2)
|
|
memcpy(mac_addr,
|
|
qdev->flash.flash_params_8000.mac_addr1,
|
|
qdev->ndev->addr_len);
|
|
else
|
|
memcpy(mac_addr,
|
|
qdev->flash.flash_params_8000.mac_addr,
|
|
qdev->ndev->addr_len);
|
|
|
|
if (!is_valid_ether_addr(mac_addr)) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Invalid MAC address.\n");
|
|
status = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
memcpy(qdev->ndev->dev_addr,
|
|
mac_addr,
|
|
qdev->ndev->addr_len);
|
|
|
|
exit:
|
|
ql_sem_unlock(qdev, SEM_FLASH_MASK);
|
|
return status;
|
|
}
|
|
|
|
static int ql_get_8012_flash_params(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
int status;
|
|
__le32 *p = (__le32 *)&qdev->flash;
|
|
u32 offset = 0;
|
|
u32 size = sizeof(struct flash_params_8012) / sizeof(u32);
|
|
|
|
/* Second function's parameters follow the first
|
|
* function's.
|
|
*/
|
|
if (qdev->port)
|
|
offset = size;
|
|
|
|
if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
|
|
return -ETIMEDOUT;
|
|
|
|
for (i = 0; i < size; i++, p++) {
|
|
status = ql_read_flash_word(qdev, i+offset, p);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Error reading flash.\n");
|
|
goto exit;
|
|
}
|
|
|
|
}
|
|
|
|
status = ql_validate_flash(qdev,
|
|
sizeof(struct flash_params_8012) / sizeof(u16),
|
|
"8012");
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Invalid flash.\n");
|
|
status = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
if (!is_valid_ether_addr(qdev->flash.flash_params_8012.mac_addr)) {
|
|
status = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
memcpy(qdev->ndev->dev_addr,
|
|
qdev->flash.flash_params_8012.mac_addr,
|
|
qdev->ndev->addr_len);
|
|
|
|
exit:
|
|
ql_sem_unlock(qdev, SEM_FLASH_MASK);
|
|
return status;
|
|
}
|
|
|
|
/* xgmac register are located behind the xgmac_addr and xgmac_data
|
|
* register pair. Each read/write requires us to wait for the ready
|
|
* bit before reading/writing the data.
|
|
*/
|
|
static int ql_write_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 data)
|
|
{
|
|
int status;
|
|
/* wait for reg to come ready */
|
|
status = ql_wait_reg_rdy(qdev,
|
|
XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
|
|
if (status)
|
|
return status;
|
|
/* write the data to the data reg */
|
|
ql_write32(qdev, XGMAC_DATA, data);
|
|
/* trigger the write */
|
|
ql_write32(qdev, XGMAC_ADDR, reg);
|
|
return status;
|
|
}
|
|
|
|
/* xgmac register are located behind the xgmac_addr and xgmac_data
|
|
* register pair. Each read/write requires us to wait for the ready
|
|
* bit before reading/writing the data.
|
|
*/
|
|
int ql_read_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
|
|
{
|
|
int status = 0;
|
|
/* wait for reg to come ready */
|
|
status = ql_wait_reg_rdy(qdev,
|
|
XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
|
|
if (status)
|
|
goto exit;
|
|
/* set up for reg read */
|
|
ql_write32(qdev, XGMAC_ADDR, reg | XGMAC_ADDR_R);
|
|
/* wait for reg to come ready */
|
|
status = ql_wait_reg_rdy(qdev,
|
|
XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
|
|
if (status)
|
|
goto exit;
|
|
/* get the data */
|
|
*data = ql_read32(qdev, XGMAC_DATA);
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
/* This is used for reading the 64-bit statistics regs. */
|
|
int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data)
|
|
{
|
|
int status = 0;
|
|
u32 hi = 0;
|
|
u32 lo = 0;
|
|
|
|
status = ql_read_xgmac_reg(qdev, reg, &lo);
|
|
if (status)
|
|
goto exit;
|
|
|
|
status = ql_read_xgmac_reg(qdev, reg + 4, &hi);
|
|
if (status)
|
|
goto exit;
|
|
|
|
*data = (u64) lo | ((u64) hi << 32);
|
|
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
static int ql_8000_port_initialize(struct ql_adapter *qdev)
|
|
{
|
|
int status;
|
|
/*
|
|
* Get MPI firmware version for driver banner
|
|
* and ethool info.
|
|
*/
|
|
status = ql_mb_about_fw(qdev);
|
|
if (status)
|
|
goto exit;
|
|
status = ql_mb_get_fw_state(qdev);
|
|
if (status)
|
|
goto exit;
|
|
/* Wake up a worker to get/set the TX/RX frame sizes. */
|
|
queue_delayed_work(qdev->workqueue, &qdev->mpi_port_cfg_work, 0);
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
/* Take the MAC Core out of reset.
|
|
* Enable statistics counting.
|
|
* Take the transmitter/receiver out of reset.
|
|
* This functionality may be done in the MPI firmware at a
|
|
* later date.
|
|
*/
|
|
static int ql_8012_port_initialize(struct ql_adapter *qdev)
|
|
{
|
|
int status = 0;
|
|
u32 data;
|
|
|
|
if (ql_sem_trylock(qdev, qdev->xg_sem_mask)) {
|
|
/* Another function has the semaphore, so
|
|
* wait for the port init bit to come ready.
|
|
*/
|
|
netif_info(qdev, link, qdev->ndev,
|
|
"Another function has the semaphore, so wait for the port init bit to come ready.\n");
|
|
status = ql_wait_reg_rdy(qdev, STS, qdev->port_init, 0);
|
|
if (status) {
|
|
netif_crit(qdev, link, qdev->ndev,
|
|
"Port initialize timed out.\n");
|
|
}
|
|
return status;
|
|
}
|
|
|
|
netif_info(qdev, link, qdev->ndev, "Got xgmac semaphore!.\n");
|
|
/* Set the core reset. */
|
|
status = ql_read_xgmac_reg(qdev, GLOBAL_CFG, &data);
|
|
if (status)
|
|
goto end;
|
|
data |= GLOBAL_CFG_RESET;
|
|
status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data);
|
|
if (status)
|
|
goto end;
|
|
|
|
/* Clear the core reset and turn on jumbo for receiver. */
|
|
data &= ~GLOBAL_CFG_RESET; /* Clear core reset. */
|
|
data |= GLOBAL_CFG_JUMBO; /* Turn on jumbo. */
|
|
data |= GLOBAL_CFG_TX_STAT_EN;
|
|
data |= GLOBAL_CFG_RX_STAT_EN;
|
|
status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data);
|
|
if (status)
|
|
goto end;
|
|
|
|
/* Enable transmitter, and clear it's reset. */
|
|
status = ql_read_xgmac_reg(qdev, TX_CFG, &data);
|
|
if (status)
|
|
goto end;
|
|
data &= ~TX_CFG_RESET; /* Clear the TX MAC reset. */
|
|
data |= TX_CFG_EN; /* Enable the transmitter. */
|
|
status = ql_write_xgmac_reg(qdev, TX_CFG, data);
|
|
if (status)
|
|
goto end;
|
|
|
|
/* Enable receiver and clear it's reset. */
|
|
status = ql_read_xgmac_reg(qdev, RX_CFG, &data);
|
|
if (status)
|
|
goto end;
|
|
data &= ~RX_CFG_RESET; /* Clear the RX MAC reset. */
|
|
data |= RX_CFG_EN; /* Enable the receiver. */
|
|
status = ql_write_xgmac_reg(qdev, RX_CFG, data);
|
|
if (status)
|
|
goto end;
|
|
|
|
/* Turn on jumbo. */
|
|
status =
|
|
ql_write_xgmac_reg(qdev, MAC_TX_PARAMS, MAC_TX_PARAMS_JUMBO | (0x2580 << 16));
|
|
if (status)
|
|
goto end;
|
|
status =
|
|
ql_write_xgmac_reg(qdev, MAC_RX_PARAMS, 0x2580);
|
|
if (status)
|
|
goto end;
|
|
|
|
/* Signal to the world that the port is enabled. */
|
|
ql_write32(qdev, STS, ((qdev->port_init << 16) | qdev->port_init));
|
|
end:
|
|
ql_sem_unlock(qdev, qdev->xg_sem_mask);
|
|
return status;
|
|
}
|
|
|
|
static inline unsigned int ql_lbq_block_size(struct ql_adapter *qdev)
|
|
{
|
|
return PAGE_SIZE << qdev->lbq_buf_order;
|
|
}
|
|
|
|
/* Get the next large buffer. */
|
|
static struct bq_desc *ql_get_curr_lbuf(struct rx_ring *rx_ring)
|
|
{
|
|
struct bq_desc *lbq_desc = &rx_ring->lbq[rx_ring->lbq_curr_idx];
|
|
rx_ring->lbq_curr_idx++;
|
|
if (rx_ring->lbq_curr_idx == rx_ring->lbq_len)
|
|
rx_ring->lbq_curr_idx = 0;
|
|
rx_ring->lbq_free_cnt++;
|
|
return lbq_desc;
|
|
}
|
|
|
|
static struct bq_desc *ql_get_curr_lchunk(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring)
|
|
{
|
|
struct bq_desc *lbq_desc = ql_get_curr_lbuf(rx_ring);
|
|
|
|
pci_dma_sync_single_for_cpu(qdev->pdev,
|
|
dma_unmap_addr(lbq_desc, mapaddr),
|
|
rx_ring->lbq_buf_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
/* If it's the last chunk of our master page then
|
|
* we unmap it.
|
|
*/
|
|
if ((lbq_desc->p.pg_chunk.offset + rx_ring->lbq_buf_size)
|
|
== ql_lbq_block_size(qdev))
|
|
pci_unmap_page(qdev->pdev,
|
|
lbq_desc->p.pg_chunk.map,
|
|
ql_lbq_block_size(qdev),
|
|
PCI_DMA_FROMDEVICE);
|
|
return lbq_desc;
|
|
}
|
|
|
|
/* Get the next small buffer. */
|
|
static struct bq_desc *ql_get_curr_sbuf(struct rx_ring *rx_ring)
|
|
{
|
|
struct bq_desc *sbq_desc = &rx_ring->sbq[rx_ring->sbq_curr_idx];
|
|
rx_ring->sbq_curr_idx++;
|
|
if (rx_ring->sbq_curr_idx == rx_ring->sbq_len)
|
|
rx_ring->sbq_curr_idx = 0;
|
|
rx_ring->sbq_free_cnt++;
|
|
return sbq_desc;
|
|
}
|
|
|
|
/* Update an rx ring index. */
|
|
static void ql_update_cq(struct rx_ring *rx_ring)
|
|
{
|
|
rx_ring->cnsmr_idx++;
|
|
rx_ring->curr_entry++;
|
|
if (unlikely(rx_ring->cnsmr_idx == rx_ring->cq_len)) {
|
|
rx_ring->cnsmr_idx = 0;
|
|
rx_ring->curr_entry = rx_ring->cq_base;
|
|
}
|
|
}
|
|
|
|
static void ql_write_cq_idx(struct rx_ring *rx_ring)
|
|
{
|
|
ql_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg);
|
|
}
|
|
|
|
static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring,
|
|
struct bq_desc *lbq_desc)
|
|
{
|
|
if (!rx_ring->pg_chunk.page) {
|
|
u64 map;
|
|
rx_ring->pg_chunk.page = alloc_pages(__GFP_COMP | GFP_ATOMIC,
|
|
qdev->lbq_buf_order);
|
|
if (unlikely(!rx_ring->pg_chunk.page)) {
|
|
netif_err(qdev, drv, qdev->ndev,
|
|
"page allocation failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
rx_ring->pg_chunk.offset = 0;
|
|
map = pci_map_page(qdev->pdev, rx_ring->pg_chunk.page,
|
|
0, ql_lbq_block_size(qdev),
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(qdev->pdev, map)) {
|
|
__free_pages(rx_ring->pg_chunk.page,
|
|
qdev->lbq_buf_order);
|
|
rx_ring->pg_chunk.page = NULL;
|
|
netif_err(qdev, drv, qdev->ndev,
|
|
"PCI mapping failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
rx_ring->pg_chunk.map = map;
|
|
rx_ring->pg_chunk.va = page_address(rx_ring->pg_chunk.page);
|
|
}
|
|
|
|
/* Copy the current master pg_chunk info
|
|
* to the current descriptor.
|
|
*/
|
|
lbq_desc->p.pg_chunk = rx_ring->pg_chunk;
|
|
|
|
/* Adjust the master page chunk for next
|
|
* buffer get.
|
|
*/
|
|
rx_ring->pg_chunk.offset += rx_ring->lbq_buf_size;
|
|
if (rx_ring->pg_chunk.offset == ql_lbq_block_size(qdev)) {
|
|
rx_ring->pg_chunk.page = NULL;
|
|
lbq_desc->p.pg_chunk.last_flag = 1;
|
|
} else {
|
|
rx_ring->pg_chunk.va += rx_ring->lbq_buf_size;
|
|
get_page(rx_ring->pg_chunk.page);
|
|
lbq_desc->p.pg_chunk.last_flag = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
/* Process (refill) a large buffer queue. */
|
|
static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
|
|
{
|
|
u32 clean_idx = rx_ring->lbq_clean_idx;
|
|
u32 start_idx = clean_idx;
|
|
struct bq_desc *lbq_desc;
|
|
u64 map;
|
|
int i;
|
|
|
|
while (rx_ring->lbq_free_cnt > 32) {
|
|
for (i = (rx_ring->lbq_clean_idx % 16); i < 16; i++) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"lbq: try cleaning clean_idx = %d.\n",
|
|
clean_idx);
|
|
lbq_desc = &rx_ring->lbq[clean_idx];
|
|
if (ql_get_next_chunk(qdev, rx_ring, lbq_desc)) {
|
|
rx_ring->lbq_clean_idx = clean_idx;
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Could not get a page chunk, i=%d, clean_idx =%d .\n",
|
|
i, clean_idx);
|
|
return;
|
|
}
|
|
|
|
map = lbq_desc->p.pg_chunk.map +
|
|
lbq_desc->p.pg_chunk.offset;
|
|
dma_unmap_addr_set(lbq_desc, mapaddr, map);
|
|
dma_unmap_len_set(lbq_desc, maplen,
|
|
rx_ring->lbq_buf_size);
|
|
*lbq_desc->addr = cpu_to_le64(map);
|
|
|
|
pci_dma_sync_single_for_device(qdev->pdev, map,
|
|
rx_ring->lbq_buf_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
clean_idx++;
|
|
if (clean_idx == rx_ring->lbq_len)
|
|
clean_idx = 0;
|
|
}
|
|
|
|
rx_ring->lbq_clean_idx = clean_idx;
|
|
rx_ring->lbq_prod_idx += 16;
|
|
if (rx_ring->lbq_prod_idx == rx_ring->lbq_len)
|
|
rx_ring->lbq_prod_idx = 0;
|
|
rx_ring->lbq_free_cnt -= 16;
|
|
}
|
|
|
|
if (start_idx != clean_idx) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"lbq: updating prod idx = %d.\n",
|
|
rx_ring->lbq_prod_idx);
|
|
ql_write_db_reg(rx_ring->lbq_prod_idx,
|
|
rx_ring->lbq_prod_idx_db_reg);
|
|
}
|
|
}
|
|
|
|
/* Process (refill) a small buffer queue. */
|
|
static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
|
|
{
|
|
u32 clean_idx = rx_ring->sbq_clean_idx;
|
|
u32 start_idx = clean_idx;
|
|
struct bq_desc *sbq_desc;
|
|
u64 map;
|
|
int i;
|
|
|
|
while (rx_ring->sbq_free_cnt > 16) {
|
|
for (i = (rx_ring->sbq_clean_idx % 16); i < 16; i++) {
|
|
sbq_desc = &rx_ring->sbq[clean_idx];
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"sbq: try cleaning clean_idx = %d.\n",
|
|
clean_idx);
|
|
if (sbq_desc->p.skb == NULL) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG,
|
|
qdev->ndev,
|
|
"sbq: getting new skb for index %d.\n",
|
|
sbq_desc->index);
|
|
sbq_desc->p.skb =
|
|
netdev_alloc_skb(qdev->ndev,
|
|
SMALL_BUFFER_SIZE);
|
|
if (sbq_desc->p.skb == NULL) {
|
|
rx_ring->sbq_clean_idx = clean_idx;
|
|
return;
|
|
}
|
|
skb_reserve(sbq_desc->p.skb, QLGE_SB_PAD);
|
|
map = pci_map_single(qdev->pdev,
|
|
sbq_desc->p.skb->data,
|
|
rx_ring->sbq_buf_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(qdev->pdev, map)) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"PCI mapping failed.\n");
|
|
rx_ring->sbq_clean_idx = clean_idx;
|
|
dev_kfree_skb_any(sbq_desc->p.skb);
|
|
sbq_desc->p.skb = NULL;
|
|
return;
|
|
}
|
|
dma_unmap_addr_set(sbq_desc, mapaddr, map);
|
|
dma_unmap_len_set(sbq_desc, maplen,
|
|
rx_ring->sbq_buf_size);
|
|
*sbq_desc->addr = cpu_to_le64(map);
|
|
}
|
|
|
|
clean_idx++;
|
|
if (clean_idx == rx_ring->sbq_len)
|
|
clean_idx = 0;
|
|
}
|
|
rx_ring->sbq_clean_idx = clean_idx;
|
|
rx_ring->sbq_prod_idx += 16;
|
|
if (rx_ring->sbq_prod_idx == rx_ring->sbq_len)
|
|
rx_ring->sbq_prod_idx = 0;
|
|
rx_ring->sbq_free_cnt -= 16;
|
|
}
|
|
|
|
if (start_idx != clean_idx) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"sbq: updating prod idx = %d.\n",
|
|
rx_ring->sbq_prod_idx);
|
|
ql_write_db_reg(rx_ring->sbq_prod_idx,
|
|
rx_ring->sbq_prod_idx_db_reg);
|
|
}
|
|
}
|
|
|
|
static void ql_update_buffer_queues(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring)
|
|
{
|
|
ql_update_sbq(qdev, rx_ring);
|
|
ql_update_lbq(qdev, rx_ring);
|
|
}
|
|
|
|
/* Unmaps tx buffers. Can be called from send() if a pci mapping
|
|
* fails at some stage, or from the interrupt when a tx completes.
|
|
*/
|
|
static void ql_unmap_send(struct ql_adapter *qdev,
|
|
struct tx_ring_desc *tx_ring_desc, int mapped)
|
|
{
|
|
int i;
|
|
for (i = 0; i < mapped; i++) {
|
|
if (i == 0 || (i == 7 && mapped > 7)) {
|
|
/*
|
|
* Unmap the skb->data area, or the
|
|
* external sglist (AKA the Outbound
|
|
* Address List (OAL)).
|
|
* If its the zeroeth element, then it's
|
|
* the skb->data area. If it's the 7th
|
|
* element and there is more than 6 frags,
|
|
* then its an OAL.
|
|
*/
|
|
if (i == 7) {
|
|
netif_printk(qdev, tx_done, KERN_DEBUG,
|
|
qdev->ndev,
|
|
"unmapping OAL area.\n");
|
|
}
|
|
pci_unmap_single(qdev->pdev,
|
|
dma_unmap_addr(&tx_ring_desc->map[i],
|
|
mapaddr),
|
|
dma_unmap_len(&tx_ring_desc->map[i],
|
|
maplen),
|
|
PCI_DMA_TODEVICE);
|
|
} else {
|
|
netif_printk(qdev, tx_done, KERN_DEBUG, qdev->ndev,
|
|
"unmapping frag %d.\n", i);
|
|
pci_unmap_page(qdev->pdev,
|
|
dma_unmap_addr(&tx_ring_desc->map[i],
|
|
mapaddr),
|
|
dma_unmap_len(&tx_ring_desc->map[i],
|
|
maplen), PCI_DMA_TODEVICE);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/* Map the buffers for this transmit. This will return
|
|
* NETDEV_TX_BUSY or NETDEV_TX_OK based on success.
|
|
*/
|
|
static int ql_map_send(struct ql_adapter *qdev,
|
|
struct ob_mac_iocb_req *mac_iocb_ptr,
|
|
struct sk_buff *skb, struct tx_ring_desc *tx_ring_desc)
|
|
{
|
|
int len = skb_headlen(skb);
|
|
dma_addr_t map;
|
|
int frag_idx, err, map_idx = 0;
|
|
struct tx_buf_desc *tbd = mac_iocb_ptr->tbd;
|
|
int frag_cnt = skb_shinfo(skb)->nr_frags;
|
|
|
|
if (frag_cnt) {
|
|
netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
|
|
"frag_cnt = %d.\n", frag_cnt);
|
|
}
|
|
/*
|
|
* Map the skb buffer first.
|
|
*/
|
|
map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
|
|
|
|
err = pci_dma_mapping_error(qdev->pdev, map);
|
|
if (err) {
|
|
netif_err(qdev, tx_queued, qdev->ndev,
|
|
"PCI mapping failed with error: %d\n", err);
|
|
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
tbd->len = cpu_to_le32(len);
|
|
tbd->addr = cpu_to_le64(map);
|
|
dma_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map);
|
|
dma_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, len);
|
|
map_idx++;
|
|
|
|
/*
|
|
* This loop fills the remainder of the 8 address descriptors
|
|
* in the IOCB. If there are more than 7 fragments, then the
|
|
* eighth address desc will point to an external list (OAL).
|
|
* When this happens, the remainder of the frags will be stored
|
|
* in this list.
|
|
*/
|
|
for (frag_idx = 0; frag_idx < frag_cnt; frag_idx++, map_idx++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_idx];
|
|
tbd++;
|
|
if (frag_idx == 6 && frag_cnt > 7) {
|
|
/* Let's tack on an sglist.
|
|
* Our control block will now
|
|
* look like this:
|
|
* iocb->seg[0] = skb->data
|
|
* iocb->seg[1] = frag[0]
|
|
* iocb->seg[2] = frag[1]
|
|
* iocb->seg[3] = frag[2]
|
|
* iocb->seg[4] = frag[3]
|
|
* iocb->seg[5] = frag[4]
|
|
* iocb->seg[6] = frag[5]
|
|
* iocb->seg[7] = ptr to OAL (external sglist)
|
|
* oal->seg[0] = frag[6]
|
|
* oal->seg[1] = frag[7]
|
|
* oal->seg[2] = frag[8]
|
|
* oal->seg[3] = frag[9]
|
|
* oal->seg[4] = frag[10]
|
|
* etc...
|
|
*/
|
|
/* Tack on the OAL in the eighth segment of IOCB. */
|
|
map = pci_map_single(qdev->pdev, &tx_ring_desc->oal,
|
|
sizeof(struct oal),
|
|
PCI_DMA_TODEVICE);
|
|
err = pci_dma_mapping_error(qdev->pdev, map);
|
|
if (err) {
|
|
netif_err(qdev, tx_queued, qdev->ndev,
|
|
"PCI mapping outbound address list with error: %d\n",
|
|
err);
|
|
goto map_error;
|
|
}
|
|
|
|
tbd->addr = cpu_to_le64(map);
|
|
/*
|
|
* The length is the number of fragments
|
|
* that remain to be mapped times the length
|
|
* of our sglist (OAL).
|
|
*/
|
|
tbd->len =
|
|
cpu_to_le32((sizeof(struct tx_buf_desc) *
|
|
(frag_cnt - frag_idx)) | TX_DESC_C);
|
|
dma_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr,
|
|
map);
|
|
dma_unmap_len_set(&tx_ring_desc->map[map_idx], maplen,
|
|
sizeof(struct oal));
|
|
tbd = (struct tx_buf_desc *)&tx_ring_desc->oal;
|
|
map_idx++;
|
|
}
|
|
|
|
map = skb_frag_dma_map(&qdev->pdev->dev, frag, 0, skb_frag_size(frag),
|
|
DMA_TO_DEVICE);
|
|
|
|
err = dma_mapping_error(&qdev->pdev->dev, map);
|
|
if (err) {
|
|
netif_err(qdev, tx_queued, qdev->ndev,
|
|
"PCI mapping frags failed with error: %d.\n",
|
|
err);
|
|
goto map_error;
|
|
}
|
|
|
|
tbd->addr = cpu_to_le64(map);
|
|
tbd->len = cpu_to_le32(skb_frag_size(frag));
|
|
dma_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map);
|
|
dma_unmap_len_set(&tx_ring_desc->map[map_idx], maplen,
|
|
skb_frag_size(frag));
|
|
|
|
}
|
|
/* Save the number of segments we've mapped. */
|
|
tx_ring_desc->map_cnt = map_idx;
|
|
/* Terminate the last segment. */
|
|
tbd->len = cpu_to_le32(le32_to_cpu(tbd->len) | TX_DESC_E);
|
|
return NETDEV_TX_OK;
|
|
|
|
map_error:
|
|
/*
|
|
* If the first frag mapping failed, then i will be zero.
|
|
* This causes the unmap of the skb->data area. Otherwise
|
|
* we pass in the number of frags that mapped successfully
|
|
* so they can be umapped.
|
|
*/
|
|
ql_unmap_send(qdev, tx_ring_desc, map_idx);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Categorizing receive firmware frame errors */
|
|
static void ql_categorize_rx_err(struct ql_adapter *qdev, u8 rx_err,
|
|
struct rx_ring *rx_ring)
|
|
{
|
|
struct nic_stats *stats = &qdev->nic_stats;
|
|
|
|
stats->rx_err_count++;
|
|
rx_ring->rx_errors++;
|
|
|
|
switch (rx_err & IB_MAC_IOCB_RSP_ERR_MASK) {
|
|
case IB_MAC_IOCB_RSP_ERR_CODE_ERR:
|
|
stats->rx_code_err++;
|
|
break;
|
|
case IB_MAC_IOCB_RSP_ERR_OVERSIZE:
|
|
stats->rx_oversize_err++;
|
|
break;
|
|
case IB_MAC_IOCB_RSP_ERR_UNDERSIZE:
|
|
stats->rx_undersize_err++;
|
|
break;
|
|
case IB_MAC_IOCB_RSP_ERR_PREAMBLE:
|
|
stats->rx_preamble_err++;
|
|
break;
|
|
case IB_MAC_IOCB_RSP_ERR_FRAME_LEN:
|
|
stats->rx_frame_len_err++;
|
|
break;
|
|
case IB_MAC_IOCB_RSP_ERR_CRC:
|
|
stats->rx_crc_err++;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ql_update_mac_hdr_len - helper routine to update the mac header length
|
|
* based on vlan tags if present
|
|
*/
|
|
static void ql_update_mac_hdr_len(struct ql_adapter *qdev,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp,
|
|
void *page, size_t *len)
|
|
{
|
|
u16 *tags;
|
|
|
|
if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
|
|
return;
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) {
|
|
tags = (u16 *)page;
|
|
/* Look for stacked vlan tags in ethertype field */
|
|
if (tags[6] == ETH_P_8021Q &&
|
|
tags[8] == ETH_P_8021Q)
|
|
*len += 2 * VLAN_HLEN;
|
|
else
|
|
*len += VLAN_HLEN;
|
|
}
|
|
}
|
|
|
|
/* Process an inbound completion from an rx ring. */
|
|
static void ql_process_mac_rx_gro_page(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp,
|
|
u32 length,
|
|
u16 vlan_id)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct bq_desc *lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
|
|
struct napi_struct *napi = &rx_ring->napi;
|
|
|
|
/* Frame error, so drop the packet. */
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
|
|
ql_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
|
|
put_page(lbq_desc->p.pg_chunk.page);
|
|
return;
|
|
}
|
|
napi->dev = qdev->ndev;
|
|
|
|
skb = napi_get_frags(napi);
|
|
if (!skb) {
|
|
netif_err(qdev, drv, qdev->ndev,
|
|
"Couldn't get an skb, exiting.\n");
|
|
rx_ring->rx_dropped++;
|
|
put_page(lbq_desc->p.pg_chunk.page);
|
|
return;
|
|
}
|
|
prefetch(lbq_desc->p.pg_chunk.va);
|
|
__skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
|
|
lbq_desc->p.pg_chunk.page,
|
|
lbq_desc->p.pg_chunk.offset,
|
|
length);
|
|
|
|
skb->len += length;
|
|
skb->data_len += length;
|
|
skb->truesize += length;
|
|
skb_shinfo(skb)->nr_frags++;
|
|
|
|
rx_ring->rx_packets++;
|
|
rx_ring->rx_bytes += length;
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
skb_record_rx_queue(skb, rx_ring->cq_id);
|
|
if (vlan_id != 0xffff)
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
|
|
napi_gro_frags(napi);
|
|
}
|
|
|
|
/* Process an inbound completion from an rx ring. */
|
|
static void ql_process_mac_rx_page(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp,
|
|
u32 length,
|
|
u16 vlan_id)
|
|
{
|
|
struct net_device *ndev = qdev->ndev;
|
|
struct sk_buff *skb = NULL;
|
|
void *addr;
|
|
struct bq_desc *lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
|
|
struct napi_struct *napi = &rx_ring->napi;
|
|
size_t hlen = ETH_HLEN;
|
|
|
|
skb = netdev_alloc_skb(ndev, length);
|
|
if (!skb) {
|
|
rx_ring->rx_dropped++;
|
|
put_page(lbq_desc->p.pg_chunk.page);
|
|
return;
|
|
}
|
|
|
|
addr = lbq_desc->p.pg_chunk.va;
|
|
prefetch(addr);
|
|
|
|
/* Frame error, so drop the packet. */
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
|
|
ql_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
|
|
goto err_out;
|
|
}
|
|
|
|
/* Update the MAC header length*/
|
|
ql_update_mac_hdr_len(qdev, ib_mac_rsp, addr, &hlen);
|
|
|
|
/* The max framesize filter on this chip is set higher than
|
|
* MTU since FCoE uses 2k frames.
|
|
*/
|
|
if (skb->len > ndev->mtu + hlen) {
|
|
netif_err(qdev, drv, qdev->ndev,
|
|
"Segment too small, dropping.\n");
|
|
rx_ring->rx_dropped++;
|
|
goto err_out;
|
|
}
|
|
skb_put_data(skb, addr, hlen);
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"%d bytes of headers and data in large. Chain page to new skb and pull tail.\n",
|
|
length);
|
|
skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
|
|
lbq_desc->p.pg_chunk.offset + hlen,
|
|
length - hlen);
|
|
skb->len += length - hlen;
|
|
skb->data_len += length - hlen;
|
|
skb->truesize += length - hlen;
|
|
|
|
rx_ring->rx_packets++;
|
|
rx_ring->rx_bytes += skb->len;
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
skb_checksum_none_assert(skb);
|
|
|
|
if ((ndev->features & NETIF_F_RXCSUM) &&
|
|
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
|
|
/* TCP frame. */
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"TCP checksum done!\n");
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
|
|
(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
|
|
/* Unfragmented ipv4 UDP frame. */
|
|
struct iphdr *iph =
|
|
(struct iphdr *)((u8 *)addr + hlen);
|
|
if (!(iph->frag_off &
|
|
htons(IP_MF|IP_OFFSET))) {
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
netif_printk(qdev, rx_status, KERN_DEBUG,
|
|
qdev->ndev,
|
|
"UDP checksum done!\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
skb_record_rx_queue(skb, rx_ring->cq_id);
|
|
if (vlan_id != 0xffff)
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
|
|
if (skb->ip_summed == CHECKSUM_UNNECESSARY)
|
|
napi_gro_receive(napi, skb);
|
|
else
|
|
netif_receive_skb(skb);
|
|
return;
|
|
err_out:
|
|
dev_kfree_skb_any(skb);
|
|
put_page(lbq_desc->p.pg_chunk.page);
|
|
}
|
|
|
|
/* Process an inbound completion from an rx ring. */
|
|
static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp,
|
|
u32 length,
|
|
u16 vlan_id)
|
|
{
|
|
struct net_device *ndev = qdev->ndev;
|
|
struct sk_buff *skb = NULL;
|
|
struct sk_buff *new_skb = NULL;
|
|
struct bq_desc *sbq_desc = ql_get_curr_sbuf(rx_ring);
|
|
|
|
skb = sbq_desc->p.skb;
|
|
/* Allocate new_skb and copy */
|
|
new_skb = netdev_alloc_skb(qdev->ndev, length + NET_IP_ALIGN);
|
|
if (new_skb == NULL) {
|
|
rx_ring->rx_dropped++;
|
|
return;
|
|
}
|
|
skb_reserve(new_skb, NET_IP_ALIGN);
|
|
|
|
pci_dma_sync_single_for_cpu(qdev->pdev,
|
|
dma_unmap_addr(sbq_desc, mapaddr),
|
|
dma_unmap_len(sbq_desc, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
skb_put_data(new_skb, skb->data, length);
|
|
|
|
pci_dma_sync_single_for_device(qdev->pdev,
|
|
dma_unmap_addr(sbq_desc, mapaddr),
|
|
dma_unmap_len(sbq_desc, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
skb = new_skb;
|
|
|
|
/* Frame error, so drop the packet. */
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
|
|
ql_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
|
|
dev_kfree_skb_any(skb);
|
|
return;
|
|
}
|
|
|
|
/* loopback self test for ethtool */
|
|
if (test_bit(QL_SELFTEST, &qdev->flags)) {
|
|
ql_check_lb_frame(qdev, skb);
|
|
dev_kfree_skb_any(skb);
|
|
return;
|
|
}
|
|
|
|
/* The max framesize filter on this chip is set higher than
|
|
* MTU since FCoE uses 2k frames.
|
|
*/
|
|
if (skb->len > ndev->mtu + ETH_HLEN) {
|
|
dev_kfree_skb_any(skb);
|
|
rx_ring->rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
prefetch(skb->data);
|
|
if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"%s Multicast.\n",
|
|
(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
|
|
IB_MAC_IOCB_RSP_M_HASH ? "Hash" :
|
|
(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
|
|
IB_MAC_IOCB_RSP_M_REG ? "Registered" :
|
|
(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
|
|
IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
|
|
}
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P)
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Promiscuous Packet.\n");
|
|
|
|
rx_ring->rx_packets++;
|
|
rx_ring->rx_bytes += skb->len;
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
skb_checksum_none_assert(skb);
|
|
|
|
/* If rx checksum is on, and there are no
|
|
* csum or frame errors.
|
|
*/
|
|
if ((ndev->features & NETIF_F_RXCSUM) &&
|
|
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
|
|
/* TCP frame. */
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"TCP checksum done!\n");
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
|
|
(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
|
|
/* Unfragmented ipv4 UDP frame. */
|
|
struct iphdr *iph = (struct iphdr *) skb->data;
|
|
if (!(iph->frag_off &
|
|
htons(IP_MF|IP_OFFSET))) {
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
netif_printk(qdev, rx_status, KERN_DEBUG,
|
|
qdev->ndev,
|
|
"UDP checksum done!\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
skb_record_rx_queue(skb, rx_ring->cq_id);
|
|
if (vlan_id != 0xffff)
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
|
|
if (skb->ip_summed == CHECKSUM_UNNECESSARY)
|
|
napi_gro_receive(&rx_ring->napi, skb);
|
|
else
|
|
netif_receive_skb(skb);
|
|
}
|
|
|
|
static void ql_realign_skb(struct sk_buff *skb, int len)
|
|
{
|
|
void *temp_addr = skb->data;
|
|
|
|
/* Undo the skb_reserve(skb,32) we did before
|
|
* giving to hardware, and realign data on
|
|
* a 2-byte boundary.
|
|
*/
|
|
skb->data -= QLGE_SB_PAD - NET_IP_ALIGN;
|
|
skb->tail -= QLGE_SB_PAD - NET_IP_ALIGN;
|
|
memmove(skb->data, temp_addr, len);
|
|
}
|
|
|
|
/*
|
|
* This function builds an skb for the given inbound
|
|
* completion. It will be rewritten for readability in the near
|
|
* future, but for not it works well.
|
|
*/
|
|
static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp)
|
|
{
|
|
struct bq_desc *lbq_desc;
|
|
struct bq_desc *sbq_desc;
|
|
struct sk_buff *skb = NULL;
|
|
u32 length = le32_to_cpu(ib_mac_rsp->data_len);
|
|
u32 hdr_len = le32_to_cpu(ib_mac_rsp->hdr_len);
|
|
size_t hlen = ETH_HLEN;
|
|
|
|
/*
|
|
* Handle the header buffer if present.
|
|
*/
|
|
if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV &&
|
|
ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Header of %d bytes in small buffer.\n", hdr_len);
|
|
/*
|
|
* Headers fit nicely into a small buffer.
|
|
*/
|
|
sbq_desc = ql_get_curr_sbuf(rx_ring);
|
|
pci_unmap_single(qdev->pdev,
|
|
dma_unmap_addr(sbq_desc, mapaddr),
|
|
dma_unmap_len(sbq_desc, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
skb = sbq_desc->p.skb;
|
|
ql_realign_skb(skb, hdr_len);
|
|
skb_put(skb, hdr_len);
|
|
sbq_desc->p.skb = NULL;
|
|
}
|
|
|
|
/*
|
|
* Handle the data buffer(s).
|
|
*/
|
|
if (unlikely(!length)) { /* Is there data too? */
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"No Data buffer in this packet.\n");
|
|
return skb;
|
|
}
|
|
|
|
if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) {
|
|
if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Headers in small, data of %d bytes in small, combine them.\n",
|
|
length);
|
|
/*
|
|
* Data is less than small buffer size so it's
|
|
* stuffed in a small buffer.
|
|
* For this case we append the data
|
|
* from the "data" small buffer to the "header" small
|
|
* buffer.
|
|
*/
|
|
sbq_desc = ql_get_curr_sbuf(rx_ring);
|
|
pci_dma_sync_single_for_cpu(qdev->pdev,
|
|
dma_unmap_addr
|
|
(sbq_desc, mapaddr),
|
|
dma_unmap_len
|
|
(sbq_desc, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_put_data(skb, sbq_desc->p.skb->data, length);
|
|
pci_dma_sync_single_for_device(qdev->pdev,
|
|
dma_unmap_addr
|
|
(sbq_desc,
|
|
mapaddr),
|
|
dma_unmap_len
|
|
(sbq_desc,
|
|
maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
} else {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"%d bytes in a single small buffer.\n",
|
|
length);
|
|
sbq_desc = ql_get_curr_sbuf(rx_ring);
|
|
skb = sbq_desc->p.skb;
|
|
ql_realign_skb(skb, length);
|
|
skb_put(skb, length);
|
|
pci_unmap_single(qdev->pdev,
|
|
dma_unmap_addr(sbq_desc,
|
|
mapaddr),
|
|
dma_unmap_len(sbq_desc,
|
|
maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
sbq_desc->p.skb = NULL;
|
|
}
|
|
} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
|
|
if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Header in small, %d bytes in large. Chain large to small!\n",
|
|
length);
|
|
/*
|
|
* The data is in a single large buffer. We
|
|
* chain it to the header buffer's skb and let
|
|
* it rip.
|
|
*/
|
|
lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Chaining page at offset = %d, for %d bytes to skb.\n",
|
|
lbq_desc->p.pg_chunk.offset, length);
|
|
skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
|
|
lbq_desc->p.pg_chunk.offset,
|
|
length);
|
|
skb->len += length;
|
|
skb->data_len += length;
|
|
skb->truesize += length;
|
|
} else {
|
|
/*
|
|
* The headers and data are in a single large buffer. We
|
|
* copy it to a new skb and let it go. This can happen with
|
|
* jumbo mtu on a non-TCP/UDP frame.
|
|
*/
|
|
lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
|
|
skb = netdev_alloc_skb(qdev->ndev, length);
|
|
if (skb == NULL) {
|
|
netif_printk(qdev, probe, KERN_DEBUG, qdev->ndev,
|
|
"No skb available, drop the packet.\n");
|
|
return NULL;
|
|
}
|
|
pci_unmap_page(qdev->pdev,
|
|
dma_unmap_addr(lbq_desc,
|
|
mapaddr),
|
|
dma_unmap_len(lbq_desc, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"%d bytes of headers and data in large. Chain page to new skb and pull tail.\n",
|
|
length);
|
|
skb_fill_page_desc(skb, 0,
|
|
lbq_desc->p.pg_chunk.page,
|
|
lbq_desc->p.pg_chunk.offset,
|
|
length);
|
|
skb->len += length;
|
|
skb->data_len += length;
|
|
skb->truesize += length;
|
|
ql_update_mac_hdr_len(qdev, ib_mac_rsp,
|
|
lbq_desc->p.pg_chunk.va,
|
|
&hlen);
|
|
__pskb_pull_tail(skb, hlen);
|
|
}
|
|
} else {
|
|
/*
|
|
* The data is in a chain of large buffers
|
|
* pointed to by a small buffer. We loop
|
|
* thru and chain them to the our small header
|
|
* buffer's skb.
|
|
* frags: There are 18 max frags and our small
|
|
* buffer will hold 32 of them. The thing is,
|
|
* we'll use 3 max for our 9000 byte jumbo
|
|
* frames. If the MTU goes up we could
|
|
* eventually be in trouble.
|
|
*/
|
|
int size, i = 0;
|
|
sbq_desc = ql_get_curr_sbuf(rx_ring);
|
|
pci_unmap_single(qdev->pdev,
|
|
dma_unmap_addr(sbq_desc, mapaddr),
|
|
dma_unmap_len(sbq_desc, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
if (!(ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS)) {
|
|
/*
|
|
* This is an non TCP/UDP IP frame, so
|
|
* the headers aren't split into a small
|
|
* buffer. We have to use the small buffer
|
|
* that contains our sg list as our skb to
|
|
* send upstairs. Copy the sg list here to
|
|
* a local buffer and use it to find the
|
|
* pages to chain.
|
|
*/
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"%d bytes of headers & data in chain of large.\n",
|
|
length);
|
|
skb = sbq_desc->p.skb;
|
|
sbq_desc->p.skb = NULL;
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
}
|
|
do {
|
|
lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
|
|
size = (length < rx_ring->lbq_buf_size) ? length :
|
|
rx_ring->lbq_buf_size;
|
|
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Adding page %d to skb for %d bytes.\n",
|
|
i, size);
|
|
skb_fill_page_desc(skb, i,
|
|
lbq_desc->p.pg_chunk.page,
|
|
lbq_desc->p.pg_chunk.offset,
|
|
size);
|
|
skb->len += size;
|
|
skb->data_len += size;
|
|
skb->truesize += size;
|
|
length -= size;
|
|
i++;
|
|
} while (length > 0);
|
|
ql_update_mac_hdr_len(qdev, ib_mac_rsp, lbq_desc->p.pg_chunk.va,
|
|
&hlen);
|
|
__pskb_pull_tail(skb, hlen);
|
|
}
|
|
return skb;
|
|
}
|
|
|
|
/* Process an inbound completion from an rx ring. */
|
|
static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp,
|
|
u16 vlan_id)
|
|
{
|
|
struct net_device *ndev = qdev->ndev;
|
|
struct sk_buff *skb = NULL;
|
|
|
|
QL_DUMP_IB_MAC_RSP(ib_mac_rsp);
|
|
|
|
skb = ql_build_rx_skb(qdev, rx_ring, ib_mac_rsp);
|
|
if (unlikely(!skb)) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"No skb available, drop packet.\n");
|
|
rx_ring->rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
/* Frame error, so drop the packet. */
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
|
|
ql_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
|
|
dev_kfree_skb_any(skb);
|
|
return;
|
|
}
|
|
|
|
/* The max framesize filter on this chip is set higher than
|
|
* MTU since FCoE uses 2k frames.
|
|
*/
|
|
if (skb->len > ndev->mtu + ETH_HLEN) {
|
|
dev_kfree_skb_any(skb);
|
|
rx_ring->rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
/* loopback self test for ethtool */
|
|
if (test_bit(QL_SELFTEST, &qdev->flags)) {
|
|
ql_check_lb_frame(qdev, skb);
|
|
dev_kfree_skb_any(skb);
|
|
return;
|
|
}
|
|
|
|
prefetch(skb->data);
|
|
if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev, "%s Multicast.\n",
|
|
(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
|
|
IB_MAC_IOCB_RSP_M_HASH ? "Hash" :
|
|
(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
|
|
IB_MAC_IOCB_RSP_M_REG ? "Registered" :
|
|
(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
|
|
IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
|
|
rx_ring->rx_multicast++;
|
|
}
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Promiscuous Packet.\n");
|
|
}
|
|
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
skb_checksum_none_assert(skb);
|
|
|
|
/* If rx checksum is on, and there are no
|
|
* csum or frame errors.
|
|
*/
|
|
if ((ndev->features & NETIF_F_RXCSUM) &&
|
|
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
|
|
/* TCP frame. */
|
|
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"TCP checksum done!\n");
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
|
|
(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
|
|
/* Unfragmented ipv4 UDP frame. */
|
|
struct iphdr *iph = (struct iphdr *) skb->data;
|
|
if (!(iph->frag_off &
|
|
htons(IP_MF|IP_OFFSET))) {
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"TCP checksum done!\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
rx_ring->rx_packets++;
|
|
rx_ring->rx_bytes += skb->len;
|
|
skb_record_rx_queue(skb, rx_ring->cq_id);
|
|
if (vlan_id != 0xffff)
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
|
|
if (skb->ip_summed == CHECKSUM_UNNECESSARY)
|
|
napi_gro_receive(&rx_ring->napi, skb);
|
|
else
|
|
netif_receive_skb(skb);
|
|
}
|
|
|
|
/* Process an inbound completion from an rx ring. */
|
|
static unsigned long ql_process_mac_rx_intr(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp)
|
|
{
|
|
u32 length = le32_to_cpu(ib_mac_rsp->data_len);
|
|
u16 vlan_id = ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) &&
|
|
(qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)) ?
|
|
((le16_to_cpu(ib_mac_rsp->vlan_id) &
|
|
IB_MAC_IOCB_RSP_VLAN_MASK)) : 0xffff;
|
|
|
|
QL_DUMP_IB_MAC_RSP(ib_mac_rsp);
|
|
|
|
if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV) {
|
|
/* The data and headers are split into
|
|
* separate buffers.
|
|
*/
|
|
ql_process_mac_split_rx_intr(qdev, rx_ring, ib_mac_rsp,
|
|
vlan_id);
|
|
} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) {
|
|
/* The data fit in a single small buffer.
|
|
* Allocate a new skb, copy the data and
|
|
* return the buffer to the free pool.
|
|
*/
|
|
ql_process_mac_rx_skb(qdev, rx_ring, ib_mac_rsp,
|
|
length, vlan_id);
|
|
} else if ((ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) &&
|
|
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK) &&
|
|
(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T)) {
|
|
/* TCP packet in a page chunk that's been checksummed.
|
|
* Tack it on to our GRO skb and let it go.
|
|
*/
|
|
ql_process_mac_rx_gro_page(qdev, rx_ring, ib_mac_rsp,
|
|
length, vlan_id);
|
|
} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
|
|
/* Non-TCP packet in a page chunk. Allocate an
|
|
* skb, tack it on frags, and send it up.
|
|
*/
|
|
ql_process_mac_rx_page(qdev, rx_ring, ib_mac_rsp,
|
|
length, vlan_id);
|
|
} else {
|
|
/* Non-TCP/UDP large frames that span multiple buffers
|
|
* can be processed corrrectly by the split frame logic.
|
|
*/
|
|
ql_process_mac_split_rx_intr(qdev, rx_ring, ib_mac_rsp,
|
|
vlan_id);
|
|
}
|
|
|
|
return (unsigned long)length;
|
|
}
|
|
|
|
/* Process an outbound completion from an rx ring. */
|
|
static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
|
|
struct ob_mac_iocb_rsp *mac_rsp)
|
|
{
|
|
struct tx_ring *tx_ring;
|
|
struct tx_ring_desc *tx_ring_desc;
|
|
|
|
QL_DUMP_OB_MAC_RSP(mac_rsp);
|
|
tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
|
|
tx_ring_desc = &tx_ring->q[mac_rsp->tid];
|
|
ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
|
|
tx_ring->tx_bytes += (tx_ring_desc->skb)->len;
|
|
tx_ring->tx_packets++;
|
|
dev_kfree_skb(tx_ring_desc->skb);
|
|
tx_ring_desc->skb = NULL;
|
|
|
|
if (unlikely(mac_rsp->flags1 & (OB_MAC_IOCB_RSP_E |
|
|
OB_MAC_IOCB_RSP_S |
|
|
OB_MAC_IOCB_RSP_L |
|
|
OB_MAC_IOCB_RSP_P | OB_MAC_IOCB_RSP_B))) {
|
|
if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_E) {
|
|
netif_warn(qdev, tx_done, qdev->ndev,
|
|
"Total descriptor length did not match transfer length.\n");
|
|
}
|
|
if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_S) {
|
|
netif_warn(qdev, tx_done, qdev->ndev,
|
|
"Frame too short to be valid, not sent.\n");
|
|
}
|
|
if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_L) {
|
|
netif_warn(qdev, tx_done, qdev->ndev,
|
|
"Frame too long, but sent anyway.\n");
|
|
}
|
|
if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_B) {
|
|
netif_warn(qdev, tx_done, qdev->ndev,
|
|
"PCI backplane error. Frame not sent.\n");
|
|
}
|
|
}
|
|
atomic_inc(&tx_ring->tx_count);
|
|
}
|
|
|
|
/* Fire up a handler to reset the MPI processor. */
|
|
void ql_queue_fw_error(struct ql_adapter *qdev)
|
|
{
|
|
ql_link_off(qdev);
|
|
queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
|
|
}
|
|
|
|
void ql_queue_asic_error(struct ql_adapter *qdev)
|
|
{
|
|
ql_link_off(qdev);
|
|
ql_disable_interrupts(qdev);
|
|
/* Clear adapter up bit to signal the recovery
|
|
* process that it shouldn't kill the reset worker
|
|
* thread
|
|
*/
|
|
clear_bit(QL_ADAPTER_UP, &qdev->flags);
|
|
/* Set asic recovery bit to indicate reset process that we are
|
|
* in fatal error recovery process rather than normal close
|
|
*/
|
|
set_bit(QL_ASIC_RECOVERY, &qdev->flags);
|
|
queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
|
|
}
|
|
|
|
static void ql_process_chip_ae_intr(struct ql_adapter *qdev,
|
|
struct ib_ae_iocb_rsp *ib_ae_rsp)
|
|
{
|
|
switch (ib_ae_rsp->event) {
|
|
case MGMT_ERR_EVENT:
|
|
netif_err(qdev, rx_err, qdev->ndev,
|
|
"Management Processor Fatal Error.\n");
|
|
ql_queue_fw_error(qdev);
|
|
return;
|
|
|
|
case CAM_LOOKUP_ERR_EVENT:
|
|
netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n");
|
|
netdev_err(qdev->ndev, "This event shouldn't occur.\n");
|
|
ql_queue_asic_error(qdev);
|
|
return;
|
|
|
|
case SOFT_ECC_ERROR_EVENT:
|
|
netdev_err(qdev->ndev, "Soft ECC error detected.\n");
|
|
ql_queue_asic_error(qdev);
|
|
break;
|
|
|
|
case PCI_ERR_ANON_BUF_RD:
|
|
netdev_err(qdev->ndev, "PCI error occurred when reading "
|
|
"anonymous buffers from rx_ring %d.\n",
|
|
ib_ae_rsp->q_id);
|
|
ql_queue_asic_error(qdev);
|
|
break;
|
|
|
|
default:
|
|
netif_err(qdev, drv, qdev->ndev, "Unexpected event %d.\n",
|
|
ib_ae_rsp->event);
|
|
ql_queue_asic_error(qdev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
|
|
{
|
|
struct ql_adapter *qdev = rx_ring->qdev;
|
|
u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
|
|
struct ob_mac_iocb_rsp *net_rsp = NULL;
|
|
int count = 0;
|
|
|
|
struct tx_ring *tx_ring;
|
|
/* While there are entries in the completion queue. */
|
|
while (prod != rx_ring->cnsmr_idx) {
|
|
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"cq_id = %d, prod = %d, cnsmr = %d\n",
|
|
rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
|
|
|
|
net_rsp = (struct ob_mac_iocb_rsp *)rx_ring->curr_entry;
|
|
rmb();
|
|
switch (net_rsp->opcode) {
|
|
|
|
case OPCODE_OB_MAC_TSO_IOCB:
|
|
case OPCODE_OB_MAC_IOCB:
|
|
ql_process_mac_tx_intr(qdev, net_rsp);
|
|
break;
|
|
default:
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Hit default case, not handled! dropping the packet, opcode = %x.\n",
|
|
net_rsp->opcode);
|
|
}
|
|
count++;
|
|
ql_update_cq(rx_ring);
|
|
prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
|
|
}
|
|
if (!net_rsp)
|
|
return 0;
|
|
ql_write_cq_idx(rx_ring);
|
|
tx_ring = &qdev->tx_ring[net_rsp->txq_idx];
|
|
if (__netif_subqueue_stopped(qdev->ndev, tx_ring->wq_id)) {
|
|
if ((atomic_read(&tx_ring->tx_count) > (tx_ring->wq_len / 4)))
|
|
/*
|
|
* The queue got stopped because the tx_ring was full.
|
|
* Wake it up, because it's now at least 25% empty.
|
|
*/
|
|
netif_wake_subqueue(qdev->ndev, tx_ring->wq_id);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
|
|
{
|
|
struct ql_adapter *qdev = rx_ring->qdev;
|
|
u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
|
|
struct ql_net_rsp_iocb *net_rsp;
|
|
int count = 0;
|
|
|
|
/* While there are entries in the completion queue. */
|
|
while (prod != rx_ring->cnsmr_idx) {
|
|
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"cq_id = %d, prod = %d, cnsmr = %d\n",
|
|
rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
|
|
|
|
net_rsp = rx_ring->curr_entry;
|
|
rmb();
|
|
switch (net_rsp->opcode) {
|
|
case OPCODE_IB_MAC_IOCB:
|
|
ql_process_mac_rx_intr(qdev, rx_ring,
|
|
(struct ib_mac_iocb_rsp *)
|
|
net_rsp);
|
|
break;
|
|
|
|
case OPCODE_IB_AE_IOCB:
|
|
ql_process_chip_ae_intr(qdev, (struct ib_ae_iocb_rsp *)
|
|
net_rsp);
|
|
break;
|
|
default:
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Hit default case, not handled! dropping the packet, opcode = %x.\n",
|
|
net_rsp->opcode);
|
|
break;
|
|
}
|
|
count++;
|
|
ql_update_cq(rx_ring);
|
|
prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
|
|
if (count == budget)
|
|
break;
|
|
}
|
|
ql_update_buffer_queues(qdev, rx_ring);
|
|
ql_write_cq_idx(rx_ring);
|
|
return count;
|
|
}
|
|
|
|
static int ql_napi_poll_msix(struct napi_struct *napi, int budget)
|
|
{
|
|
struct rx_ring *rx_ring = container_of(napi, struct rx_ring, napi);
|
|
struct ql_adapter *qdev = rx_ring->qdev;
|
|
struct rx_ring *trx_ring;
|
|
int i, work_done = 0;
|
|
struct intr_context *ctx = &qdev->intr_context[rx_ring->cq_id];
|
|
|
|
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
|
|
"Enter, NAPI POLL cq_id = %d.\n", rx_ring->cq_id);
|
|
|
|
/* Service the TX rings first. They start
|
|
* right after the RSS rings. */
|
|
for (i = qdev->rss_ring_count; i < qdev->rx_ring_count; i++) {
|
|
trx_ring = &qdev->rx_ring[i];
|
|
/* If this TX completion ring belongs to this vector and
|
|
* it's not empty then service it.
|
|
*/
|
|
if ((ctx->irq_mask & (1 << trx_ring->cq_id)) &&
|
|
(ql_read_sh_reg(trx_ring->prod_idx_sh_reg) !=
|
|
trx_ring->cnsmr_idx)) {
|
|
netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
|
|
"%s: Servicing TX completion ring %d.\n",
|
|
__func__, trx_ring->cq_id);
|
|
ql_clean_outbound_rx_ring(trx_ring);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Now service the RSS ring if it's active.
|
|
*/
|
|
if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) !=
|
|
rx_ring->cnsmr_idx) {
|
|
netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
|
|
"%s: Servicing RX completion ring %d.\n",
|
|
__func__, rx_ring->cq_id);
|
|
work_done = ql_clean_inbound_rx_ring(rx_ring, budget);
|
|
}
|
|
|
|
if (work_done < budget) {
|
|
napi_complete_done(napi, work_done);
|
|
ql_enable_completion_interrupt(qdev, rx_ring->irq);
|
|
}
|
|
return work_done;
|
|
}
|
|
|
|
static void qlge_vlan_mode(struct net_device *ndev, netdev_features_t features)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
if (features & NETIF_F_HW_VLAN_CTAG_RX) {
|
|
ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK |
|
|
NIC_RCV_CFG_VLAN_MATCH_AND_NON);
|
|
} else {
|
|
ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* qlge_update_hw_vlan_features - helper routine to reinitialize the adapter
|
|
* based on the features to enable/disable hardware vlan accel
|
|
*/
|
|
static int qlge_update_hw_vlan_features(struct net_device *ndev,
|
|
netdev_features_t features)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int status = 0;
|
|
bool need_restart = netif_running(ndev);
|
|
|
|
if (need_restart) {
|
|
status = ql_adapter_down(qdev);
|
|
if (status) {
|
|
netif_err(qdev, link, qdev->ndev,
|
|
"Failed to bring down the adapter\n");
|
|
return status;
|
|
}
|
|
}
|
|
|
|
/* update the features with resent change */
|
|
ndev->features = features;
|
|
|
|
if (need_restart) {
|
|
status = ql_adapter_up(qdev);
|
|
if (status) {
|
|
netif_err(qdev, link, qdev->ndev,
|
|
"Failed to bring up the adapter\n");
|
|
return status;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int qlge_set_features(struct net_device *ndev,
|
|
netdev_features_t features)
|
|
{
|
|
netdev_features_t changed = ndev->features ^ features;
|
|
int err;
|
|
|
|
if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
|
|
/* Update the behavior of vlan accel in the adapter */
|
|
err = qlge_update_hw_vlan_features(ndev, features);
|
|
if (err)
|
|
return err;
|
|
|
|
qlge_vlan_mode(ndev, features);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __qlge_vlan_rx_add_vid(struct ql_adapter *qdev, u16 vid)
|
|
{
|
|
u32 enable_bit = MAC_ADDR_E;
|
|
int err;
|
|
|
|
err = ql_set_mac_addr_reg(qdev, (u8 *) &enable_bit,
|
|
MAC_ADDR_TYPE_VLAN, vid);
|
|
if (err)
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init vlan address.\n");
|
|
return err;
|
|
}
|
|
|
|
static int qlge_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int status;
|
|
int err;
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (status)
|
|
return status;
|
|
|
|
err = __qlge_vlan_rx_add_vid(qdev, vid);
|
|
set_bit(vid, qdev->active_vlans);
|
|
|
|
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __qlge_vlan_rx_kill_vid(struct ql_adapter *qdev, u16 vid)
|
|
{
|
|
u32 enable_bit = 0;
|
|
int err;
|
|
|
|
err = ql_set_mac_addr_reg(qdev, (u8 *) &enable_bit,
|
|
MAC_ADDR_TYPE_VLAN, vid);
|
|
if (err)
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to clear vlan address.\n");
|
|
return err;
|
|
}
|
|
|
|
static int qlge_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int status;
|
|
int err;
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (status)
|
|
return status;
|
|
|
|
err = __qlge_vlan_rx_kill_vid(qdev, vid);
|
|
clear_bit(vid, qdev->active_vlans);
|
|
|
|
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void qlge_restore_vlan(struct ql_adapter *qdev)
|
|
{
|
|
int status;
|
|
u16 vid;
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (status)
|
|
return;
|
|
|
|
for_each_set_bit(vid, qdev->active_vlans, VLAN_N_VID)
|
|
__qlge_vlan_rx_add_vid(qdev, vid);
|
|
|
|
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
|
|
}
|
|
|
|
/* MSI-X Multiple Vector Interrupt Handler for inbound completions. */
|
|
static irqreturn_t qlge_msix_rx_isr(int irq, void *dev_id)
|
|
{
|
|
struct rx_ring *rx_ring = dev_id;
|
|
napi_schedule(&rx_ring->napi);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* This handles a fatal error, MPI activity, and the default
|
|
* rx_ring in an MSI-X multiple vector environment.
|
|
* In MSI/Legacy environment it also process the rest of
|
|
* the rx_rings.
|
|
*/
|
|
static irqreturn_t qlge_isr(int irq, void *dev_id)
|
|
{
|
|
struct rx_ring *rx_ring = dev_id;
|
|
struct ql_adapter *qdev = rx_ring->qdev;
|
|
struct intr_context *intr_context = &qdev->intr_context[0];
|
|
u32 var;
|
|
int work_done = 0;
|
|
|
|
spin_lock(&qdev->hw_lock);
|
|
if (atomic_read(&qdev->intr_context[0].irq_cnt)) {
|
|
netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
|
|
"Shared Interrupt, Not ours!\n");
|
|
spin_unlock(&qdev->hw_lock);
|
|
return IRQ_NONE;
|
|
}
|
|
spin_unlock(&qdev->hw_lock);
|
|
|
|
var = ql_disable_completion_interrupt(qdev, intr_context->intr);
|
|
|
|
/*
|
|
* Check for fatal error.
|
|
*/
|
|
if (var & STS_FE) {
|
|
ql_queue_asic_error(qdev);
|
|
netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var);
|
|
var = ql_read32(qdev, ERR_STS);
|
|
netdev_err(qdev->ndev, "Resetting chip. "
|
|
"Error Status Register = 0x%x\n", var);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Check MPI processor activity.
|
|
*/
|
|
if ((var & STS_PI) &&
|
|
(ql_read32(qdev, INTR_MASK) & INTR_MASK_PI)) {
|
|
/*
|
|
* We've got an async event or mailbox completion.
|
|
* Handle it and clear the source of the interrupt.
|
|
*/
|
|
netif_err(qdev, intr, qdev->ndev,
|
|
"Got MPI processor interrupt.\n");
|
|
ql_disable_completion_interrupt(qdev, intr_context->intr);
|
|
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
|
|
queue_delayed_work_on(smp_processor_id(),
|
|
qdev->workqueue, &qdev->mpi_work, 0);
|
|
work_done++;
|
|
}
|
|
|
|
/*
|
|
* Get the bit-mask that shows the active queues for this
|
|
* pass. Compare it to the queues that this irq services
|
|
* and call napi if there's a match.
|
|
*/
|
|
var = ql_read32(qdev, ISR1);
|
|
if (var & intr_context->irq_mask) {
|
|
netif_info(qdev, intr, qdev->ndev,
|
|
"Waking handler for rx_ring[0].\n");
|
|
ql_disable_completion_interrupt(qdev, intr_context->intr);
|
|
napi_schedule(&rx_ring->napi);
|
|
work_done++;
|
|
}
|
|
ql_enable_completion_interrupt(qdev, intr_context->intr);
|
|
return work_done ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static int ql_tso(struct sk_buff *skb, struct ob_mac_tso_iocb_req *mac_iocb_ptr)
|
|
{
|
|
|
|
if (skb_is_gso(skb)) {
|
|
int err;
|
|
__be16 l3_proto = vlan_get_protocol(skb);
|
|
|
|
err = skb_cow_head(skb, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB;
|
|
mac_iocb_ptr->flags3 |= OB_MAC_TSO_IOCB_IC;
|
|
mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len);
|
|
mac_iocb_ptr->total_hdrs_len =
|
|
cpu_to_le16(skb_transport_offset(skb) + tcp_hdrlen(skb));
|
|
mac_iocb_ptr->net_trans_offset =
|
|
cpu_to_le16(skb_network_offset(skb) |
|
|
skb_transport_offset(skb)
|
|
<< OB_MAC_TRANSPORT_HDR_SHIFT);
|
|
mac_iocb_ptr->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
|
|
mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_LSO;
|
|
if (likely(l3_proto == htons(ETH_P_IP))) {
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
iph->check = 0;
|
|
mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4;
|
|
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
|
|
iph->daddr, 0,
|
|
IPPROTO_TCP,
|
|
0);
|
|
} else if (l3_proto == htons(ETH_P_IPV6)) {
|
|
mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP6;
|
|
tcp_hdr(skb)->check =
|
|
~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
|
|
&ipv6_hdr(skb)->daddr,
|
|
0, IPPROTO_TCP, 0);
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ql_hw_csum_setup(struct sk_buff *skb,
|
|
struct ob_mac_tso_iocb_req *mac_iocb_ptr)
|
|
{
|
|
int len;
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
__sum16 *check;
|
|
mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB;
|
|
mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len);
|
|
mac_iocb_ptr->net_trans_offset =
|
|
cpu_to_le16(skb_network_offset(skb) |
|
|
skb_transport_offset(skb) << OB_MAC_TRANSPORT_HDR_SHIFT);
|
|
|
|
mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4;
|
|
len = (ntohs(iph->tot_len) - (iph->ihl << 2));
|
|
if (likely(iph->protocol == IPPROTO_TCP)) {
|
|
check = &(tcp_hdr(skb)->check);
|
|
mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_TC;
|
|
mac_iocb_ptr->total_hdrs_len =
|
|
cpu_to_le16(skb_transport_offset(skb) +
|
|
(tcp_hdr(skb)->doff << 2));
|
|
} else {
|
|
check = &(udp_hdr(skb)->check);
|
|
mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_UC;
|
|
mac_iocb_ptr->total_hdrs_len =
|
|
cpu_to_le16(skb_transport_offset(skb) +
|
|
sizeof(struct udphdr));
|
|
}
|
|
*check = ~csum_tcpudp_magic(iph->saddr,
|
|
iph->daddr, len, iph->protocol, 0);
|
|
}
|
|
|
|
static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct tx_ring_desc *tx_ring_desc;
|
|
struct ob_mac_iocb_req *mac_iocb_ptr;
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int tso;
|
|
struct tx_ring *tx_ring;
|
|
u32 tx_ring_idx = (u32) skb->queue_mapping;
|
|
|
|
tx_ring = &qdev->tx_ring[tx_ring_idx];
|
|
|
|
if (skb_padto(skb, ETH_ZLEN))
|
|
return NETDEV_TX_OK;
|
|
|
|
if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
|
|
netif_info(qdev, tx_queued, qdev->ndev,
|
|
"%s: BUG! shutting down tx queue %d due to lack of resources.\n",
|
|
__func__, tx_ring_idx);
|
|
netif_stop_subqueue(ndev, tx_ring->wq_id);
|
|
tx_ring->tx_errors++;
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
|
|
mac_iocb_ptr = tx_ring_desc->queue_entry;
|
|
memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
|
|
|
|
mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
|
|
mac_iocb_ptr->tid = tx_ring_desc->index;
|
|
/* We use the upper 32-bits to store the tx queue for this IO.
|
|
* When we get the completion we can use it to establish the context.
|
|
*/
|
|
mac_iocb_ptr->txq_idx = tx_ring_idx;
|
|
tx_ring_desc->skb = skb;
|
|
|
|
mac_iocb_ptr->frame_len = cpu_to_le16((u16) skb->len);
|
|
|
|
if (skb_vlan_tag_present(skb)) {
|
|
netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
|
|
"Adding a vlan tag %d.\n", skb_vlan_tag_get(skb));
|
|
mac_iocb_ptr->flags3 |= OB_MAC_IOCB_V;
|
|
mac_iocb_ptr->vlan_tci = cpu_to_le16(skb_vlan_tag_get(skb));
|
|
}
|
|
tso = ql_tso(skb, (struct ob_mac_tso_iocb_req *)mac_iocb_ptr);
|
|
if (tso < 0) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
} else if (unlikely(!tso) && (skb->ip_summed == CHECKSUM_PARTIAL)) {
|
|
ql_hw_csum_setup(skb,
|
|
(struct ob_mac_tso_iocb_req *)mac_iocb_ptr);
|
|
}
|
|
if (ql_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) !=
|
|
NETDEV_TX_OK) {
|
|
netif_err(qdev, tx_queued, qdev->ndev,
|
|
"Could not map the segments.\n");
|
|
tx_ring->tx_errors++;
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
QL_DUMP_OB_MAC_IOCB(mac_iocb_ptr);
|
|
tx_ring->prod_idx++;
|
|
if (tx_ring->prod_idx == tx_ring->wq_len)
|
|
tx_ring->prod_idx = 0;
|
|
wmb();
|
|
|
|
ql_write_db_reg_relaxed(tx_ring->prod_idx, tx_ring->prod_idx_db_reg);
|
|
mmiowb();
|
|
netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
|
|
"tx queued, slot %d, len %d\n",
|
|
tx_ring->prod_idx, skb->len);
|
|
|
|
atomic_dec(&tx_ring->tx_count);
|
|
|
|
if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
|
|
netif_stop_subqueue(ndev, tx_ring->wq_id);
|
|
if ((atomic_read(&tx_ring->tx_count) > (tx_ring->wq_len / 4)))
|
|
/*
|
|
* The queue got stopped because the tx_ring was full.
|
|
* Wake it up, because it's now at least 25% empty.
|
|
*/
|
|
netif_wake_subqueue(qdev->ndev, tx_ring->wq_id);
|
|
}
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
|
|
static void ql_free_shadow_space(struct ql_adapter *qdev)
|
|
{
|
|
if (qdev->rx_ring_shadow_reg_area) {
|
|
pci_free_consistent(qdev->pdev,
|
|
PAGE_SIZE,
|
|
qdev->rx_ring_shadow_reg_area,
|
|
qdev->rx_ring_shadow_reg_dma);
|
|
qdev->rx_ring_shadow_reg_area = NULL;
|
|
}
|
|
if (qdev->tx_ring_shadow_reg_area) {
|
|
pci_free_consistent(qdev->pdev,
|
|
PAGE_SIZE,
|
|
qdev->tx_ring_shadow_reg_area,
|
|
qdev->tx_ring_shadow_reg_dma);
|
|
qdev->tx_ring_shadow_reg_area = NULL;
|
|
}
|
|
}
|
|
|
|
static int ql_alloc_shadow_space(struct ql_adapter *qdev)
|
|
{
|
|
qdev->rx_ring_shadow_reg_area =
|
|
pci_zalloc_consistent(qdev->pdev, PAGE_SIZE,
|
|
&qdev->rx_ring_shadow_reg_dma);
|
|
if (qdev->rx_ring_shadow_reg_area == NULL) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Allocation of RX shadow space failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
qdev->tx_ring_shadow_reg_area =
|
|
pci_zalloc_consistent(qdev->pdev, PAGE_SIZE,
|
|
&qdev->tx_ring_shadow_reg_dma);
|
|
if (qdev->tx_ring_shadow_reg_area == NULL) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Allocation of TX shadow space failed.\n");
|
|
goto err_wqp_sh_area;
|
|
}
|
|
return 0;
|
|
|
|
err_wqp_sh_area:
|
|
pci_free_consistent(qdev->pdev,
|
|
PAGE_SIZE,
|
|
qdev->rx_ring_shadow_reg_area,
|
|
qdev->rx_ring_shadow_reg_dma);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void ql_init_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
|
|
{
|
|
struct tx_ring_desc *tx_ring_desc;
|
|
int i;
|
|
struct ob_mac_iocb_req *mac_iocb_ptr;
|
|
|
|
mac_iocb_ptr = tx_ring->wq_base;
|
|
tx_ring_desc = tx_ring->q;
|
|
for (i = 0; i < tx_ring->wq_len; i++) {
|
|
tx_ring_desc->index = i;
|
|
tx_ring_desc->skb = NULL;
|
|
tx_ring_desc->queue_entry = mac_iocb_ptr;
|
|
mac_iocb_ptr++;
|
|
tx_ring_desc++;
|
|
}
|
|
atomic_set(&tx_ring->tx_count, tx_ring->wq_len);
|
|
}
|
|
|
|
static void ql_free_tx_resources(struct ql_adapter *qdev,
|
|
struct tx_ring *tx_ring)
|
|
{
|
|
if (tx_ring->wq_base) {
|
|
pci_free_consistent(qdev->pdev, tx_ring->wq_size,
|
|
tx_ring->wq_base, tx_ring->wq_base_dma);
|
|
tx_ring->wq_base = NULL;
|
|
}
|
|
kfree(tx_ring->q);
|
|
tx_ring->q = NULL;
|
|
}
|
|
|
|
static int ql_alloc_tx_resources(struct ql_adapter *qdev,
|
|
struct tx_ring *tx_ring)
|
|
{
|
|
tx_ring->wq_base =
|
|
pci_alloc_consistent(qdev->pdev, tx_ring->wq_size,
|
|
&tx_ring->wq_base_dma);
|
|
|
|
if ((tx_ring->wq_base == NULL) ||
|
|
tx_ring->wq_base_dma & WQ_ADDR_ALIGN)
|
|
goto pci_alloc_err;
|
|
|
|
tx_ring->q =
|
|
kmalloc_array(tx_ring->wq_len, sizeof(struct tx_ring_desc),
|
|
GFP_KERNEL);
|
|
if (tx_ring->q == NULL)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
pci_free_consistent(qdev->pdev, tx_ring->wq_size,
|
|
tx_ring->wq_base, tx_ring->wq_base_dma);
|
|
tx_ring->wq_base = NULL;
|
|
pci_alloc_err:
|
|
netif_err(qdev, ifup, qdev->ndev, "tx_ring alloc failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring)
|
|
{
|
|
struct bq_desc *lbq_desc;
|
|
|
|
uint32_t curr_idx, clean_idx;
|
|
|
|
curr_idx = rx_ring->lbq_curr_idx;
|
|
clean_idx = rx_ring->lbq_clean_idx;
|
|
while (curr_idx != clean_idx) {
|
|
lbq_desc = &rx_ring->lbq[curr_idx];
|
|
|
|
if (lbq_desc->p.pg_chunk.last_flag) {
|
|
pci_unmap_page(qdev->pdev,
|
|
lbq_desc->p.pg_chunk.map,
|
|
ql_lbq_block_size(qdev),
|
|
PCI_DMA_FROMDEVICE);
|
|
lbq_desc->p.pg_chunk.last_flag = 0;
|
|
}
|
|
|
|
put_page(lbq_desc->p.pg_chunk.page);
|
|
lbq_desc->p.pg_chunk.page = NULL;
|
|
|
|
if (++curr_idx == rx_ring->lbq_len)
|
|
curr_idx = 0;
|
|
|
|
}
|
|
if (rx_ring->pg_chunk.page) {
|
|
pci_unmap_page(qdev->pdev, rx_ring->pg_chunk.map,
|
|
ql_lbq_block_size(qdev), PCI_DMA_FROMDEVICE);
|
|
put_page(rx_ring->pg_chunk.page);
|
|
rx_ring->pg_chunk.page = NULL;
|
|
}
|
|
}
|
|
|
|
static void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring)
|
|
{
|
|
int i;
|
|
struct bq_desc *sbq_desc;
|
|
|
|
for (i = 0; i < rx_ring->sbq_len; i++) {
|
|
sbq_desc = &rx_ring->sbq[i];
|
|
if (sbq_desc == NULL) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"sbq_desc %d is NULL.\n", i);
|
|
return;
|
|
}
|
|
if (sbq_desc->p.skb) {
|
|
pci_unmap_single(qdev->pdev,
|
|
dma_unmap_addr(sbq_desc, mapaddr),
|
|
dma_unmap_len(sbq_desc, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(sbq_desc->p.skb);
|
|
sbq_desc->p.skb = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Free all large and small rx buffers associated
|
|
* with the completion queues for this device.
|
|
*/
|
|
static void ql_free_rx_buffers(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
struct rx_ring *rx_ring;
|
|
|
|
for (i = 0; i < qdev->rx_ring_count; i++) {
|
|
rx_ring = &qdev->rx_ring[i];
|
|
if (rx_ring->lbq)
|
|
ql_free_lbq_buffers(qdev, rx_ring);
|
|
if (rx_ring->sbq)
|
|
ql_free_sbq_buffers(qdev, rx_ring);
|
|
}
|
|
}
|
|
|
|
static void ql_alloc_rx_buffers(struct ql_adapter *qdev)
|
|
{
|
|
struct rx_ring *rx_ring;
|
|
int i;
|
|
|
|
for (i = 0; i < qdev->rx_ring_count; i++) {
|
|
rx_ring = &qdev->rx_ring[i];
|
|
if (rx_ring->type != TX_Q)
|
|
ql_update_buffer_queues(qdev, rx_ring);
|
|
}
|
|
}
|
|
|
|
static void ql_init_lbq_ring(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring)
|
|
{
|
|
int i;
|
|
struct bq_desc *lbq_desc;
|
|
__le64 *bq = rx_ring->lbq_base;
|
|
|
|
memset(rx_ring->lbq, 0, rx_ring->lbq_len * sizeof(struct bq_desc));
|
|
for (i = 0; i < rx_ring->lbq_len; i++) {
|
|
lbq_desc = &rx_ring->lbq[i];
|
|
memset(lbq_desc, 0, sizeof(*lbq_desc));
|
|
lbq_desc->index = i;
|
|
lbq_desc->addr = bq;
|
|
bq++;
|
|
}
|
|
}
|
|
|
|
static void ql_init_sbq_ring(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring)
|
|
{
|
|
int i;
|
|
struct bq_desc *sbq_desc;
|
|
__le64 *bq = rx_ring->sbq_base;
|
|
|
|
memset(rx_ring->sbq, 0, rx_ring->sbq_len * sizeof(struct bq_desc));
|
|
for (i = 0; i < rx_ring->sbq_len; i++) {
|
|
sbq_desc = &rx_ring->sbq[i];
|
|
memset(sbq_desc, 0, sizeof(*sbq_desc));
|
|
sbq_desc->index = i;
|
|
sbq_desc->addr = bq;
|
|
bq++;
|
|
}
|
|
}
|
|
|
|
static void ql_free_rx_resources(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring)
|
|
{
|
|
/* Free the small buffer queue. */
|
|
if (rx_ring->sbq_base) {
|
|
pci_free_consistent(qdev->pdev,
|
|
rx_ring->sbq_size,
|
|
rx_ring->sbq_base, rx_ring->sbq_base_dma);
|
|
rx_ring->sbq_base = NULL;
|
|
}
|
|
|
|
/* Free the small buffer queue control blocks. */
|
|
kfree(rx_ring->sbq);
|
|
rx_ring->sbq = NULL;
|
|
|
|
/* Free the large buffer queue. */
|
|
if (rx_ring->lbq_base) {
|
|
pci_free_consistent(qdev->pdev,
|
|
rx_ring->lbq_size,
|
|
rx_ring->lbq_base, rx_ring->lbq_base_dma);
|
|
rx_ring->lbq_base = NULL;
|
|
}
|
|
|
|
/* Free the large buffer queue control blocks. */
|
|
kfree(rx_ring->lbq);
|
|
rx_ring->lbq = NULL;
|
|
|
|
/* Free the rx queue. */
|
|
if (rx_ring->cq_base) {
|
|
pci_free_consistent(qdev->pdev,
|
|
rx_ring->cq_size,
|
|
rx_ring->cq_base, rx_ring->cq_base_dma);
|
|
rx_ring->cq_base = NULL;
|
|
}
|
|
}
|
|
|
|
/* Allocate queues and buffers for this completions queue based
|
|
* on the values in the parameter structure. */
|
|
static int ql_alloc_rx_resources(struct ql_adapter *qdev,
|
|
struct rx_ring *rx_ring)
|
|
{
|
|
|
|
/*
|
|
* Allocate the completion queue for this rx_ring.
|
|
*/
|
|
rx_ring->cq_base =
|
|
pci_alloc_consistent(qdev->pdev, rx_ring->cq_size,
|
|
&rx_ring->cq_base_dma);
|
|
|
|
if (rx_ring->cq_base == NULL) {
|
|
netif_err(qdev, ifup, qdev->ndev, "rx_ring alloc failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (rx_ring->sbq_len) {
|
|
/*
|
|
* Allocate small buffer queue.
|
|
*/
|
|
rx_ring->sbq_base =
|
|
pci_alloc_consistent(qdev->pdev, rx_ring->sbq_size,
|
|
&rx_ring->sbq_base_dma);
|
|
|
|
if (rx_ring->sbq_base == NULL) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Small buffer queue allocation failed.\n");
|
|
goto err_mem;
|
|
}
|
|
|
|
/*
|
|
* Allocate small buffer queue control blocks.
|
|
*/
|
|
rx_ring->sbq = kmalloc_array(rx_ring->sbq_len,
|
|
sizeof(struct bq_desc),
|
|
GFP_KERNEL);
|
|
if (rx_ring->sbq == NULL)
|
|
goto err_mem;
|
|
|
|
ql_init_sbq_ring(qdev, rx_ring);
|
|
}
|
|
|
|
if (rx_ring->lbq_len) {
|
|
/*
|
|
* Allocate large buffer queue.
|
|
*/
|
|
rx_ring->lbq_base =
|
|
pci_alloc_consistent(qdev->pdev, rx_ring->lbq_size,
|
|
&rx_ring->lbq_base_dma);
|
|
|
|
if (rx_ring->lbq_base == NULL) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Large buffer queue allocation failed.\n");
|
|
goto err_mem;
|
|
}
|
|
/*
|
|
* Allocate large buffer queue control blocks.
|
|
*/
|
|
rx_ring->lbq = kmalloc_array(rx_ring->lbq_len,
|
|
sizeof(struct bq_desc),
|
|
GFP_KERNEL);
|
|
if (rx_ring->lbq == NULL)
|
|
goto err_mem;
|
|
|
|
ql_init_lbq_ring(qdev, rx_ring);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_mem:
|
|
ql_free_rx_resources(qdev, rx_ring);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void ql_tx_ring_clean(struct ql_adapter *qdev)
|
|
{
|
|
struct tx_ring *tx_ring;
|
|
struct tx_ring_desc *tx_ring_desc;
|
|
int i, j;
|
|
|
|
/*
|
|
* Loop through all queues and free
|
|
* any resources.
|
|
*/
|
|
for (j = 0; j < qdev->tx_ring_count; j++) {
|
|
tx_ring = &qdev->tx_ring[j];
|
|
for (i = 0; i < tx_ring->wq_len; i++) {
|
|
tx_ring_desc = &tx_ring->q[i];
|
|
if (tx_ring_desc && tx_ring_desc->skb) {
|
|
netif_err(qdev, ifdown, qdev->ndev,
|
|
"Freeing lost SKB %p, from queue %d, index %d.\n",
|
|
tx_ring_desc->skb, j,
|
|
tx_ring_desc->index);
|
|
ql_unmap_send(qdev, tx_ring_desc,
|
|
tx_ring_desc->map_cnt);
|
|
dev_kfree_skb(tx_ring_desc->skb);
|
|
tx_ring_desc->skb = NULL;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ql_free_mem_resources(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < qdev->tx_ring_count; i++)
|
|
ql_free_tx_resources(qdev, &qdev->tx_ring[i]);
|
|
for (i = 0; i < qdev->rx_ring_count; i++)
|
|
ql_free_rx_resources(qdev, &qdev->rx_ring[i]);
|
|
ql_free_shadow_space(qdev);
|
|
}
|
|
|
|
static int ql_alloc_mem_resources(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
|
|
/* Allocate space for our shadow registers and such. */
|
|
if (ql_alloc_shadow_space(qdev))
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < qdev->rx_ring_count; i++) {
|
|
if (ql_alloc_rx_resources(qdev, &qdev->rx_ring[i]) != 0) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"RX resource allocation failed.\n");
|
|
goto err_mem;
|
|
}
|
|
}
|
|
/* Allocate tx queue resources */
|
|
for (i = 0; i < qdev->tx_ring_count; i++) {
|
|
if (ql_alloc_tx_resources(qdev, &qdev->tx_ring[i]) != 0) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"TX resource allocation failed.\n");
|
|
goto err_mem;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
err_mem:
|
|
ql_free_mem_resources(qdev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Set up the rx ring control block and pass it to the chip.
|
|
* The control block is defined as
|
|
* "Completion Queue Initialization Control Block", or cqicb.
|
|
*/
|
|
static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
|
|
{
|
|
struct cqicb *cqicb = &rx_ring->cqicb;
|
|
void *shadow_reg = qdev->rx_ring_shadow_reg_area +
|
|
(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
|
|
u64 shadow_reg_dma = qdev->rx_ring_shadow_reg_dma +
|
|
(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
|
|
void __iomem *doorbell_area =
|
|
qdev->doorbell_area + (DB_PAGE_SIZE * (128 + rx_ring->cq_id));
|
|
int err = 0;
|
|
u16 bq_len;
|
|
u64 tmp;
|
|
__le64 *base_indirect_ptr;
|
|
int page_entries;
|
|
|
|
/* Set up the shadow registers for this ring. */
|
|
rx_ring->prod_idx_sh_reg = shadow_reg;
|
|
rx_ring->prod_idx_sh_reg_dma = shadow_reg_dma;
|
|
*rx_ring->prod_idx_sh_reg = 0;
|
|
shadow_reg += sizeof(u64);
|
|
shadow_reg_dma += sizeof(u64);
|
|
rx_ring->lbq_base_indirect = shadow_reg;
|
|
rx_ring->lbq_base_indirect_dma = shadow_reg_dma;
|
|
shadow_reg += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
|
|
shadow_reg_dma += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
|
|
rx_ring->sbq_base_indirect = shadow_reg;
|
|
rx_ring->sbq_base_indirect_dma = shadow_reg_dma;
|
|
|
|
/* PCI doorbell mem area + 0x00 for consumer index register */
|
|
rx_ring->cnsmr_idx_db_reg = (u32 __iomem *) doorbell_area;
|
|
rx_ring->cnsmr_idx = 0;
|
|
rx_ring->curr_entry = rx_ring->cq_base;
|
|
|
|
/* PCI doorbell mem area + 0x04 for valid register */
|
|
rx_ring->valid_db_reg = doorbell_area + 0x04;
|
|
|
|
/* PCI doorbell mem area + 0x18 for large buffer consumer */
|
|
rx_ring->lbq_prod_idx_db_reg = (u32 __iomem *) (doorbell_area + 0x18);
|
|
|
|
/* PCI doorbell mem area + 0x1c */
|
|
rx_ring->sbq_prod_idx_db_reg = (u32 __iomem *) (doorbell_area + 0x1c);
|
|
|
|
memset((void *)cqicb, 0, sizeof(struct cqicb));
|
|
cqicb->msix_vect = rx_ring->irq;
|
|
|
|
bq_len = (rx_ring->cq_len == 65536) ? 0 : (u16) rx_ring->cq_len;
|
|
cqicb->len = cpu_to_le16(bq_len | LEN_V | LEN_CPP_CONT);
|
|
|
|
cqicb->addr = cpu_to_le64(rx_ring->cq_base_dma);
|
|
|
|
cqicb->prod_idx_addr = cpu_to_le64(rx_ring->prod_idx_sh_reg_dma);
|
|
|
|
/*
|
|
* Set up the control block load flags.
|
|
*/
|
|
cqicb->flags = FLAGS_LC | /* Load queue base address */
|
|
FLAGS_LV | /* Load MSI-X vector */
|
|
FLAGS_LI; /* Load irq delay values */
|
|
if (rx_ring->lbq_len) {
|
|
cqicb->flags |= FLAGS_LL; /* Load lbq values */
|
|
tmp = (u64)rx_ring->lbq_base_dma;
|
|
base_indirect_ptr = rx_ring->lbq_base_indirect;
|
|
page_entries = 0;
|
|
do {
|
|
*base_indirect_ptr = cpu_to_le64(tmp);
|
|
tmp += DB_PAGE_SIZE;
|
|
base_indirect_ptr++;
|
|
page_entries++;
|
|
} while (page_entries < MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
|
|
cqicb->lbq_addr =
|
|
cpu_to_le64(rx_ring->lbq_base_indirect_dma);
|
|
bq_len = (rx_ring->lbq_buf_size == 65536) ? 0 :
|
|
(u16) rx_ring->lbq_buf_size;
|
|
cqicb->lbq_buf_size = cpu_to_le16(bq_len);
|
|
bq_len = (rx_ring->lbq_len == 65536) ? 0 :
|
|
(u16) rx_ring->lbq_len;
|
|
cqicb->lbq_len = cpu_to_le16(bq_len);
|
|
rx_ring->lbq_prod_idx = 0;
|
|
rx_ring->lbq_curr_idx = 0;
|
|
rx_ring->lbq_clean_idx = 0;
|
|
rx_ring->lbq_free_cnt = rx_ring->lbq_len;
|
|
}
|
|
if (rx_ring->sbq_len) {
|
|
cqicb->flags |= FLAGS_LS; /* Load sbq values */
|
|
tmp = (u64)rx_ring->sbq_base_dma;
|
|
base_indirect_ptr = rx_ring->sbq_base_indirect;
|
|
page_entries = 0;
|
|
do {
|
|
*base_indirect_ptr = cpu_to_le64(tmp);
|
|
tmp += DB_PAGE_SIZE;
|
|
base_indirect_ptr++;
|
|
page_entries++;
|
|
} while (page_entries < MAX_DB_PAGES_PER_BQ(rx_ring->sbq_len));
|
|
cqicb->sbq_addr =
|
|
cpu_to_le64(rx_ring->sbq_base_indirect_dma);
|
|
cqicb->sbq_buf_size =
|
|
cpu_to_le16((u16)(rx_ring->sbq_buf_size));
|
|
bq_len = (rx_ring->sbq_len == 65536) ? 0 :
|
|
(u16) rx_ring->sbq_len;
|
|
cqicb->sbq_len = cpu_to_le16(bq_len);
|
|
rx_ring->sbq_prod_idx = 0;
|
|
rx_ring->sbq_curr_idx = 0;
|
|
rx_ring->sbq_clean_idx = 0;
|
|
rx_ring->sbq_free_cnt = rx_ring->sbq_len;
|
|
}
|
|
switch (rx_ring->type) {
|
|
case TX_Q:
|
|
cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs);
|
|
cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames);
|
|
break;
|
|
case RX_Q:
|
|
/* Inbound completion handling rx_rings run in
|
|
* separate NAPI contexts.
|
|
*/
|
|
netif_napi_add(qdev->ndev, &rx_ring->napi, ql_napi_poll_msix,
|
|
64);
|
|
cqicb->irq_delay = cpu_to_le16(qdev->rx_coalesce_usecs);
|
|
cqicb->pkt_delay = cpu_to_le16(qdev->rx_max_coalesced_frames);
|
|
break;
|
|
default:
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"Invalid rx_ring->type = %d.\n", rx_ring->type);
|
|
}
|
|
err = ql_write_cfg(qdev, cqicb, sizeof(struct cqicb),
|
|
CFG_LCQ, rx_ring->cq_id);
|
|
if (err) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to load CQICB.\n");
|
|
return err;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
|
|
{
|
|
struct wqicb *wqicb = (struct wqicb *)tx_ring;
|
|
void __iomem *doorbell_area =
|
|
qdev->doorbell_area + (DB_PAGE_SIZE * tx_ring->wq_id);
|
|
void *shadow_reg = qdev->tx_ring_shadow_reg_area +
|
|
(tx_ring->wq_id * sizeof(u64));
|
|
u64 shadow_reg_dma = qdev->tx_ring_shadow_reg_dma +
|
|
(tx_ring->wq_id * sizeof(u64));
|
|
int err = 0;
|
|
|
|
/*
|
|
* Assign doorbell registers for this tx_ring.
|
|
*/
|
|
/* TX PCI doorbell mem area for tx producer index */
|
|
tx_ring->prod_idx_db_reg = (u32 __iomem *) doorbell_area;
|
|
tx_ring->prod_idx = 0;
|
|
/* TX PCI doorbell mem area + 0x04 */
|
|
tx_ring->valid_db_reg = doorbell_area + 0x04;
|
|
|
|
/*
|
|
* Assign shadow registers for this tx_ring.
|
|
*/
|
|
tx_ring->cnsmr_idx_sh_reg = shadow_reg;
|
|
tx_ring->cnsmr_idx_sh_reg_dma = shadow_reg_dma;
|
|
|
|
wqicb->len = cpu_to_le16(tx_ring->wq_len | Q_LEN_V | Q_LEN_CPP_CONT);
|
|
wqicb->flags = cpu_to_le16(Q_FLAGS_LC |
|
|
Q_FLAGS_LB | Q_FLAGS_LI | Q_FLAGS_LO);
|
|
wqicb->cq_id_rss = cpu_to_le16(tx_ring->cq_id);
|
|
wqicb->rid = 0;
|
|
wqicb->addr = cpu_to_le64(tx_ring->wq_base_dma);
|
|
|
|
wqicb->cnsmr_idx_addr = cpu_to_le64(tx_ring->cnsmr_idx_sh_reg_dma);
|
|
|
|
ql_init_tx_ring(qdev, tx_ring);
|
|
|
|
err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
|
|
(u16) tx_ring->wq_id);
|
|
if (err) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to load tx_ring.\n");
|
|
return err;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void ql_disable_msix(struct ql_adapter *qdev)
|
|
{
|
|
if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
|
|
pci_disable_msix(qdev->pdev);
|
|
clear_bit(QL_MSIX_ENABLED, &qdev->flags);
|
|
kfree(qdev->msi_x_entry);
|
|
qdev->msi_x_entry = NULL;
|
|
} else if (test_bit(QL_MSI_ENABLED, &qdev->flags)) {
|
|
pci_disable_msi(qdev->pdev);
|
|
clear_bit(QL_MSI_ENABLED, &qdev->flags);
|
|
}
|
|
}
|
|
|
|
/* We start by trying to get the number of vectors
|
|
* stored in qdev->intr_count. If we don't get that
|
|
* many then we reduce the count and try again.
|
|
*/
|
|
static void ql_enable_msix(struct ql_adapter *qdev)
|
|
{
|
|
int i, err;
|
|
|
|
/* Get the MSIX vectors. */
|
|
if (qlge_irq_type == MSIX_IRQ) {
|
|
/* Try to alloc space for the msix struct,
|
|
* if it fails then go to MSI/legacy.
|
|
*/
|
|
qdev->msi_x_entry = kcalloc(qdev->intr_count,
|
|
sizeof(struct msix_entry),
|
|
GFP_KERNEL);
|
|
if (!qdev->msi_x_entry) {
|
|
qlge_irq_type = MSI_IRQ;
|
|
goto msi;
|
|
}
|
|
|
|
for (i = 0; i < qdev->intr_count; i++)
|
|
qdev->msi_x_entry[i].entry = i;
|
|
|
|
err = pci_enable_msix_range(qdev->pdev, qdev->msi_x_entry,
|
|
1, qdev->intr_count);
|
|
if (err < 0) {
|
|
kfree(qdev->msi_x_entry);
|
|
qdev->msi_x_entry = NULL;
|
|
netif_warn(qdev, ifup, qdev->ndev,
|
|
"MSI-X Enable failed, trying MSI.\n");
|
|
qlge_irq_type = MSI_IRQ;
|
|
} else {
|
|
qdev->intr_count = err;
|
|
set_bit(QL_MSIX_ENABLED, &qdev->flags);
|
|
netif_info(qdev, ifup, qdev->ndev,
|
|
"MSI-X Enabled, got %d vectors.\n",
|
|
qdev->intr_count);
|
|
return;
|
|
}
|
|
}
|
|
msi:
|
|
qdev->intr_count = 1;
|
|
if (qlge_irq_type == MSI_IRQ) {
|
|
if (!pci_enable_msi(qdev->pdev)) {
|
|
set_bit(QL_MSI_ENABLED, &qdev->flags);
|
|
netif_info(qdev, ifup, qdev->ndev,
|
|
"Running with MSI interrupts.\n");
|
|
return;
|
|
}
|
|
}
|
|
qlge_irq_type = LEG_IRQ;
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"Running with legacy interrupts.\n");
|
|
}
|
|
|
|
/* Each vector services 1 RSS ring and and 1 or more
|
|
* TX completion rings. This function loops through
|
|
* the TX completion rings and assigns the vector that
|
|
* will service it. An example would be if there are
|
|
* 2 vectors (so 2 RSS rings) and 8 TX completion rings.
|
|
* This would mean that vector 0 would service RSS ring 0
|
|
* and TX completion rings 0,1,2 and 3. Vector 1 would
|
|
* service RSS ring 1 and TX completion rings 4,5,6 and 7.
|
|
*/
|
|
static void ql_set_tx_vect(struct ql_adapter *qdev)
|
|
{
|
|
int i, j, vect;
|
|
u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count;
|
|
|
|
if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
|
|
/* Assign irq vectors to TX rx_rings.*/
|
|
for (vect = 0, j = 0, i = qdev->rss_ring_count;
|
|
i < qdev->rx_ring_count; i++) {
|
|
if (j == tx_rings_per_vector) {
|
|
vect++;
|
|
j = 0;
|
|
}
|
|
qdev->rx_ring[i].irq = vect;
|
|
j++;
|
|
}
|
|
} else {
|
|
/* For single vector all rings have an irq
|
|
* of zero.
|
|
*/
|
|
for (i = 0; i < qdev->rx_ring_count; i++)
|
|
qdev->rx_ring[i].irq = 0;
|
|
}
|
|
}
|
|
|
|
/* Set the interrupt mask for this vector. Each vector
|
|
* will service 1 RSS ring and 1 or more TX completion
|
|
* rings. This function sets up a bit mask per vector
|
|
* that indicates which rings it services.
|
|
*/
|
|
static void ql_set_irq_mask(struct ql_adapter *qdev, struct intr_context *ctx)
|
|
{
|
|
int j, vect = ctx->intr;
|
|
u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count;
|
|
|
|
if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
|
|
/* Add the RSS ring serviced by this vector
|
|
* to the mask.
|
|
*/
|
|
ctx->irq_mask = (1 << qdev->rx_ring[vect].cq_id);
|
|
/* Add the TX ring(s) serviced by this vector
|
|
* to the mask. */
|
|
for (j = 0; j < tx_rings_per_vector; j++) {
|
|
ctx->irq_mask |=
|
|
(1 << qdev->rx_ring[qdev->rss_ring_count +
|
|
(vect * tx_rings_per_vector) + j].cq_id);
|
|
}
|
|
} else {
|
|
/* For single vector we just shift each queue's
|
|
* ID into the mask.
|
|
*/
|
|
for (j = 0; j < qdev->rx_ring_count; j++)
|
|
ctx->irq_mask |= (1 << qdev->rx_ring[j].cq_id);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Here we build the intr_context structures based on
|
|
* our rx_ring count and intr vector count.
|
|
* The intr_context structure is used to hook each vector
|
|
* to possibly different handlers.
|
|
*/
|
|
static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev)
|
|
{
|
|
int i = 0;
|
|
struct intr_context *intr_context = &qdev->intr_context[0];
|
|
|
|
if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
|
|
/* Each rx_ring has it's
|
|
* own intr_context since we have separate
|
|
* vectors for each queue.
|
|
*/
|
|
for (i = 0; i < qdev->intr_count; i++, intr_context++) {
|
|
qdev->rx_ring[i].irq = i;
|
|
intr_context->intr = i;
|
|
intr_context->qdev = qdev;
|
|
/* Set up this vector's bit-mask that indicates
|
|
* which queues it services.
|
|
*/
|
|
ql_set_irq_mask(qdev, intr_context);
|
|
/*
|
|
* We set up each vectors enable/disable/read bits so
|
|
* there's no bit/mask calculations in the critical path.
|
|
*/
|
|
intr_context->intr_en_mask =
|
|
INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
|
|
INTR_EN_TYPE_ENABLE | INTR_EN_IHD_MASK | INTR_EN_IHD
|
|
| i;
|
|
intr_context->intr_dis_mask =
|
|
INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
|
|
INTR_EN_TYPE_DISABLE | INTR_EN_IHD_MASK |
|
|
INTR_EN_IHD | i;
|
|
intr_context->intr_read_mask =
|
|
INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
|
|
INTR_EN_TYPE_READ | INTR_EN_IHD_MASK | INTR_EN_IHD |
|
|
i;
|
|
if (i == 0) {
|
|
/* The first vector/queue handles
|
|
* broadcast/multicast, fatal errors,
|
|
* and firmware events. This in addition
|
|
* to normal inbound NAPI processing.
|
|
*/
|
|
intr_context->handler = qlge_isr;
|
|
sprintf(intr_context->name, "%s-rx-%d",
|
|
qdev->ndev->name, i);
|
|
} else {
|
|
/*
|
|
* Inbound queues handle unicast frames only.
|
|
*/
|
|
intr_context->handler = qlge_msix_rx_isr;
|
|
sprintf(intr_context->name, "%s-rx-%d",
|
|
qdev->ndev->name, i);
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
* All rx_rings use the same intr_context since
|
|
* there is only one vector.
|
|
*/
|
|
intr_context->intr = 0;
|
|
intr_context->qdev = qdev;
|
|
/*
|
|
* We set up each vectors enable/disable/read bits so
|
|
* there's no bit/mask calculations in the critical path.
|
|
*/
|
|
intr_context->intr_en_mask =
|
|
INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_ENABLE;
|
|
intr_context->intr_dis_mask =
|
|
INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
|
|
INTR_EN_TYPE_DISABLE;
|
|
intr_context->intr_read_mask =
|
|
INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_READ;
|
|
/*
|
|
* Single interrupt means one handler for all rings.
|
|
*/
|
|
intr_context->handler = qlge_isr;
|
|
sprintf(intr_context->name, "%s-single_irq", qdev->ndev->name);
|
|
/* Set up this vector's bit-mask that indicates
|
|
* which queues it services. In this case there is
|
|
* a single vector so it will service all RSS and
|
|
* TX completion rings.
|
|
*/
|
|
ql_set_irq_mask(qdev, intr_context);
|
|
}
|
|
/* Tell the TX completion rings which MSIx vector
|
|
* they will be using.
|
|
*/
|
|
ql_set_tx_vect(qdev);
|
|
}
|
|
|
|
static void ql_free_irq(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
struct intr_context *intr_context = &qdev->intr_context[0];
|
|
|
|
for (i = 0; i < qdev->intr_count; i++, intr_context++) {
|
|
if (intr_context->hooked) {
|
|
if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
|
|
free_irq(qdev->msi_x_entry[i].vector,
|
|
&qdev->rx_ring[i]);
|
|
} else {
|
|
free_irq(qdev->pdev->irq, &qdev->rx_ring[0]);
|
|
}
|
|
}
|
|
}
|
|
ql_disable_msix(qdev);
|
|
}
|
|
|
|
static int ql_request_irq(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
int status = 0;
|
|
struct pci_dev *pdev = qdev->pdev;
|
|
struct intr_context *intr_context = &qdev->intr_context[0];
|
|
|
|
ql_resolve_queues_to_irqs(qdev);
|
|
|
|
for (i = 0; i < qdev->intr_count; i++, intr_context++) {
|
|
atomic_set(&intr_context->irq_cnt, 0);
|
|
if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
|
|
status = request_irq(qdev->msi_x_entry[i].vector,
|
|
intr_context->handler,
|
|
0,
|
|
intr_context->name,
|
|
&qdev->rx_ring[i]);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed request for MSIX interrupt %d.\n",
|
|
i);
|
|
goto err_irq;
|
|
}
|
|
} else {
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"trying msi or legacy interrupts.\n");
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"%s: irq = %d.\n", __func__, pdev->irq);
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"%s: context->name = %s.\n", __func__,
|
|
intr_context->name);
|
|
netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
|
|
"%s: dev_id = 0x%p.\n", __func__,
|
|
&qdev->rx_ring[0]);
|
|
status =
|
|
request_irq(pdev->irq, qlge_isr,
|
|
test_bit(QL_MSI_ENABLED,
|
|
&qdev->
|
|
flags) ? 0 : IRQF_SHARED,
|
|
intr_context->name, &qdev->rx_ring[0]);
|
|
if (status)
|
|
goto err_irq;
|
|
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Hooked intr %d, queue type %s, with name %s.\n",
|
|
i,
|
|
qdev->rx_ring[0].type == DEFAULT_Q ?
|
|
"DEFAULT_Q" :
|
|
qdev->rx_ring[0].type == TX_Q ? "TX_Q" :
|
|
qdev->rx_ring[0].type == RX_Q ? "RX_Q" : "",
|
|
intr_context->name);
|
|
}
|
|
intr_context->hooked = 1;
|
|
}
|
|
return status;
|
|
err_irq:
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to get the interrupts!!!\n");
|
|
ql_free_irq(qdev);
|
|
return status;
|
|
}
|
|
|
|
static int ql_start_rss(struct ql_adapter *qdev)
|
|
{
|
|
static const u8 init_hash_seed[] = {
|
|
0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
|
|
0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0,
|
|
0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b, 0x30, 0xb4,
|
|
0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30, 0xf2, 0x0c,
|
|
0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa
|
|
};
|
|
struct ricb *ricb = &qdev->ricb;
|
|
int status = 0;
|
|
int i;
|
|
u8 *hash_id = (u8 *) ricb->hash_cq_id;
|
|
|
|
memset((void *)ricb, 0, sizeof(*ricb));
|
|
|
|
ricb->base_cq = RSS_L4K;
|
|
ricb->flags =
|
|
(RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6);
|
|
ricb->mask = cpu_to_le16((u16)(0x3ff));
|
|
|
|
/*
|
|
* Fill out the Indirection Table.
|
|
*/
|
|
for (i = 0; i < 1024; i++)
|
|
hash_id[i] = (i & (qdev->rss_ring_count - 1));
|
|
|
|
memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40);
|
|
memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16);
|
|
|
|
status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to load RICB.\n");
|
|
return status;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int ql_clear_routing_entries(struct ql_adapter *qdev)
|
|
{
|
|
int i, status = 0;
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
|
|
if (status)
|
|
return status;
|
|
/* Clear all the entries in the routing table. */
|
|
for (i = 0; i < 16; i++) {
|
|
status = ql_set_routing_reg(qdev, i, 0, 0);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init routing register for CAM packets.\n");
|
|
break;
|
|
}
|
|
}
|
|
ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
|
|
return status;
|
|
}
|
|
|
|
/* Initialize the frame-to-queue routing. */
|
|
static int ql_route_initialize(struct ql_adapter *qdev)
|
|
{
|
|
int status = 0;
|
|
|
|
/* Clear all the entries in the routing table. */
|
|
status = ql_clear_routing_entries(qdev);
|
|
if (status)
|
|
return status;
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
|
|
if (status)
|
|
return status;
|
|
|
|
status = ql_set_routing_reg(qdev, RT_IDX_IP_CSUM_ERR_SLOT,
|
|
RT_IDX_IP_CSUM_ERR, 1);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init routing register "
|
|
"for IP CSUM error packets.\n");
|
|
goto exit;
|
|
}
|
|
status = ql_set_routing_reg(qdev, RT_IDX_TCP_UDP_CSUM_ERR_SLOT,
|
|
RT_IDX_TU_CSUM_ERR, 1);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init routing register "
|
|
"for TCP/UDP CSUM error packets.\n");
|
|
goto exit;
|
|
}
|
|
status = ql_set_routing_reg(qdev, RT_IDX_BCAST_SLOT, RT_IDX_BCAST, 1);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init routing register for broadcast packets.\n");
|
|
goto exit;
|
|
}
|
|
/* If we have more than one inbound queue, then turn on RSS in the
|
|
* routing block.
|
|
*/
|
|
if (qdev->rss_ring_count > 1) {
|
|
status = ql_set_routing_reg(qdev, RT_IDX_RSS_MATCH_SLOT,
|
|
RT_IDX_RSS_MATCH, 1);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init routing register for MATCH RSS packets.\n");
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
status = ql_set_routing_reg(qdev, RT_IDX_CAM_HIT_SLOT,
|
|
RT_IDX_CAM_HIT, 1);
|
|
if (status)
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init routing register for CAM packets.\n");
|
|
exit:
|
|
ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
|
|
return status;
|
|
}
|
|
|
|
int ql_cam_route_initialize(struct ql_adapter *qdev)
|
|
{
|
|
int status, set;
|
|
|
|
/* If check if the link is up and use to
|
|
* determine if we are setting or clearing
|
|
* the MAC address in the CAM.
|
|
*/
|
|
set = ql_read32(qdev, STS);
|
|
set &= qdev->port_link_up;
|
|
status = ql_set_mac_addr(qdev, set);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to init mac address.\n");
|
|
return status;
|
|
}
|
|
|
|
status = ql_route_initialize(qdev);
|
|
if (status)
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to init routing table.\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
static int ql_adapter_initialize(struct ql_adapter *qdev)
|
|
{
|
|
u32 value, mask;
|
|
int i;
|
|
int status = 0;
|
|
|
|
/*
|
|
* Set up the System register to halt on errors.
|
|
*/
|
|
value = SYS_EFE | SYS_FAE;
|
|
mask = value << 16;
|
|
ql_write32(qdev, SYS, mask | value);
|
|
|
|
/* Set the default queue, and VLAN behavior. */
|
|
value = NIC_RCV_CFG_DFQ;
|
|
mask = NIC_RCV_CFG_DFQ_MASK;
|
|
if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX) {
|
|
value |= NIC_RCV_CFG_RV;
|
|
mask |= (NIC_RCV_CFG_RV << 16);
|
|
}
|
|
ql_write32(qdev, NIC_RCV_CFG, (mask | value));
|
|
|
|
/* Set the MPI interrupt to enabled. */
|
|
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
|
|
|
|
/* Enable the function, set pagesize, enable error checking. */
|
|
value = FSC_FE | FSC_EPC_INBOUND | FSC_EPC_OUTBOUND |
|
|
FSC_EC | FSC_VM_PAGE_4K;
|
|
value |= SPLT_SETTING;
|
|
|
|
/* Set/clear header splitting. */
|
|
mask = FSC_VM_PAGESIZE_MASK |
|
|
FSC_DBL_MASK | FSC_DBRST_MASK | (value << 16);
|
|
ql_write32(qdev, FSC, mask | value);
|
|
|
|
ql_write32(qdev, SPLT_HDR, SPLT_LEN);
|
|
|
|
/* Set RX packet routing to use port/pci function on which the
|
|
* packet arrived on in addition to usual frame routing.
|
|
* This is helpful on bonding where both interfaces can have
|
|
* the same MAC address.
|
|
*/
|
|
ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
|
|
/* Reroute all packets to our Interface.
|
|
* They may have been routed to MPI firmware
|
|
* due to WOL.
|
|
*/
|
|
value = ql_read32(qdev, MGMT_RCV_CFG);
|
|
value &= ~MGMT_RCV_CFG_RM;
|
|
mask = 0xffff0000;
|
|
|
|
/* Sticky reg needs clearing due to WOL. */
|
|
ql_write32(qdev, MGMT_RCV_CFG, mask);
|
|
ql_write32(qdev, MGMT_RCV_CFG, mask | value);
|
|
|
|
/* Default WOL is enable on Mezz cards */
|
|
if (qdev->pdev->subsystem_device == 0x0068 ||
|
|
qdev->pdev->subsystem_device == 0x0180)
|
|
qdev->wol = WAKE_MAGIC;
|
|
|
|
/* Start up the rx queues. */
|
|
for (i = 0; i < qdev->rx_ring_count; i++) {
|
|
status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to start rx ring[%d].\n", i);
|
|
return status;
|
|
}
|
|
}
|
|
|
|
/* If there is more than one inbound completion queue
|
|
* then download a RICB to configure RSS.
|
|
*/
|
|
if (qdev->rss_ring_count > 1) {
|
|
status = ql_start_rss(qdev);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to start RSS.\n");
|
|
return status;
|
|
}
|
|
}
|
|
|
|
/* Start up the tx queues. */
|
|
for (i = 0; i < qdev->tx_ring_count; i++) {
|
|
status = ql_start_tx_ring(qdev, &qdev->tx_ring[i]);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to start tx ring[%d].\n", i);
|
|
return status;
|
|
}
|
|
}
|
|
|
|
/* Initialize the port and set the max framesize. */
|
|
status = qdev->nic_ops->port_initialize(qdev);
|
|
if (status)
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to start port.\n");
|
|
|
|
/* Set up the MAC address and frame routing filter. */
|
|
status = ql_cam_route_initialize(qdev);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Failed to init CAM/Routing tables.\n");
|
|
return status;
|
|
}
|
|
|
|
/* Start NAPI for the RSS queues. */
|
|
for (i = 0; i < qdev->rss_ring_count; i++)
|
|
napi_enable(&qdev->rx_ring[i].napi);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* Issue soft reset to chip. */
|
|
static int ql_adapter_reset(struct ql_adapter *qdev)
|
|
{
|
|
u32 value;
|
|
int status = 0;
|
|
unsigned long end_jiffies;
|
|
|
|
/* Clear all the entries in the routing table. */
|
|
status = ql_clear_routing_entries(qdev);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Failed to clear routing bits.\n");
|
|
return status;
|
|
}
|
|
|
|
/* Check if bit is set then skip the mailbox command and
|
|
* clear the bit, else we are in normal reset process.
|
|
*/
|
|
if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) {
|
|
/* Stop management traffic. */
|
|
ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
|
|
|
|
/* Wait for the NIC and MGMNT FIFOs to empty. */
|
|
ql_wait_fifo_empty(qdev);
|
|
} else
|
|
clear_bit(QL_ASIC_RECOVERY, &qdev->flags);
|
|
|
|
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
|
|
|
|
end_jiffies = jiffies + usecs_to_jiffies(30);
|
|
do {
|
|
value = ql_read32(qdev, RST_FO);
|
|
if ((value & RST_FO_FR) == 0)
|
|
break;
|
|
cpu_relax();
|
|
} while (time_before(jiffies, end_jiffies));
|
|
|
|
if (value & RST_FO_FR) {
|
|
netif_err(qdev, ifdown, qdev->ndev,
|
|
"ETIMEDOUT!!! errored out of resetting the chip!\n");
|
|
status = -ETIMEDOUT;
|
|
}
|
|
|
|
/* Resume management traffic. */
|
|
ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME);
|
|
return status;
|
|
}
|
|
|
|
static void ql_display_dev_info(struct net_device *ndev)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
netif_info(qdev, probe, qdev->ndev,
|
|
"Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
|
|
"XG Roll = %d, XG Rev = %d.\n",
|
|
qdev->func,
|
|
qdev->port,
|
|
qdev->chip_rev_id & 0x0000000f,
|
|
qdev->chip_rev_id >> 4 & 0x0000000f,
|
|
qdev->chip_rev_id >> 8 & 0x0000000f,
|
|
qdev->chip_rev_id >> 12 & 0x0000000f);
|
|
netif_info(qdev, probe, qdev->ndev,
|
|
"MAC address %pM\n", ndev->dev_addr);
|
|
}
|
|
|
|
static int ql_wol(struct ql_adapter *qdev)
|
|
{
|
|
int status = 0;
|
|
u32 wol = MB_WOL_DISABLE;
|
|
|
|
/* The CAM is still intact after a reset, but if we
|
|
* are doing WOL, then we may need to program the
|
|
* routing regs. We would also need to issue the mailbox
|
|
* commands to instruct the MPI what to do per the ethtool
|
|
* settings.
|
|
*/
|
|
|
|
if (qdev->wol & (WAKE_ARP | WAKE_MAGICSECURE | WAKE_PHY | WAKE_UCAST |
|
|
WAKE_MCAST | WAKE_BCAST)) {
|
|
netif_err(qdev, ifdown, qdev->ndev,
|
|
"Unsupported WOL parameter. qdev->wol = 0x%x.\n",
|
|
qdev->wol);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (qdev->wol & WAKE_MAGIC) {
|
|
status = ql_mb_wol_set_magic(qdev, 1);
|
|
if (status) {
|
|
netif_err(qdev, ifdown, qdev->ndev,
|
|
"Failed to set magic packet on %s.\n",
|
|
qdev->ndev->name);
|
|
return status;
|
|
} else
|
|
netif_info(qdev, drv, qdev->ndev,
|
|
"Enabled magic packet successfully on %s.\n",
|
|
qdev->ndev->name);
|
|
|
|
wol |= MB_WOL_MAGIC_PKT;
|
|
}
|
|
|
|
if (qdev->wol) {
|
|
wol |= MB_WOL_MODE_ON;
|
|
status = ql_mb_wol_mode(qdev, wol);
|
|
netif_err(qdev, drv, qdev->ndev,
|
|
"WOL %s (wol code 0x%x) on %s\n",
|
|
(status == 0) ? "Successfully set" : "Failed",
|
|
wol, qdev->ndev->name);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static void ql_cancel_all_work_sync(struct ql_adapter *qdev)
|
|
{
|
|
|
|
/* Don't kill the reset worker thread if we
|
|
* are in the process of recovery.
|
|
*/
|
|
if (test_bit(QL_ADAPTER_UP, &qdev->flags))
|
|
cancel_delayed_work_sync(&qdev->asic_reset_work);
|
|
cancel_delayed_work_sync(&qdev->mpi_reset_work);
|
|
cancel_delayed_work_sync(&qdev->mpi_work);
|
|
cancel_delayed_work_sync(&qdev->mpi_idc_work);
|
|
cancel_delayed_work_sync(&qdev->mpi_core_to_log);
|
|
cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
|
|
}
|
|
|
|
static int ql_adapter_down(struct ql_adapter *qdev)
|
|
{
|
|
int i, status = 0;
|
|
|
|
ql_link_off(qdev);
|
|
|
|
ql_cancel_all_work_sync(qdev);
|
|
|
|
for (i = 0; i < qdev->rss_ring_count; i++)
|
|
napi_disable(&qdev->rx_ring[i].napi);
|
|
|
|
clear_bit(QL_ADAPTER_UP, &qdev->flags);
|
|
|
|
ql_disable_interrupts(qdev);
|
|
|
|
ql_tx_ring_clean(qdev);
|
|
|
|
/* Call netif_napi_del() from common point.
|
|
*/
|
|
for (i = 0; i < qdev->rss_ring_count; i++)
|
|
netif_napi_del(&qdev->rx_ring[i].napi);
|
|
|
|
status = ql_adapter_reset(qdev);
|
|
if (status)
|
|
netif_err(qdev, ifdown, qdev->ndev, "reset(func #%d) FAILED!\n",
|
|
qdev->func);
|
|
ql_free_rx_buffers(qdev);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int ql_adapter_up(struct ql_adapter *qdev)
|
|
{
|
|
int err = 0;
|
|
|
|
err = ql_adapter_initialize(qdev);
|
|
if (err) {
|
|
netif_info(qdev, ifup, qdev->ndev, "Unable to initialize adapter.\n");
|
|
goto err_init;
|
|
}
|
|
set_bit(QL_ADAPTER_UP, &qdev->flags);
|
|
ql_alloc_rx_buffers(qdev);
|
|
/* If the port is initialized and the
|
|
* link is up the turn on the carrier.
|
|
*/
|
|
if ((ql_read32(qdev, STS) & qdev->port_init) &&
|
|
(ql_read32(qdev, STS) & qdev->port_link_up))
|
|
ql_link_on(qdev);
|
|
/* Restore rx mode. */
|
|
clear_bit(QL_ALLMULTI, &qdev->flags);
|
|
clear_bit(QL_PROMISCUOUS, &qdev->flags);
|
|
qlge_set_multicast_list(qdev->ndev);
|
|
|
|
/* Restore vlan setting. */
|
|
qlge_restore_vlan(qdev);
|
|
|
|
ql_enable_interrupts(qdev);
|
|
ql_enable_all_completion_interrupts(qdev);
|
|
netif_tx_start_all_queues(qdev->ndev);
|
|
|
|
return 0;
|
|
err_init:
|
|
ql_adapter_reset(qdev);
|
|
return err;
|
|
}
|
|
|
|
static void ql_release_adapter_resources(struct ql_adapter *qdev)
|
|
{
|
|
ql_free_mem_resources(qdev);
|
|
ql_free_irq(qdev);
|
|
}
|
|
|
|
static int ql_get_adapter_resources(struct ql_adapter *qdev)
|
|
{
|
|
int status = 0;
|
|
|
|
if (ql_alloc_mem_resources(qdev)) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Unable to allocate memory.\n");
|
|
return -ENOMEM;
|
|
}
|
|
status = ql_request_irq(qdev);
|
|
return status;
|
|
}
|
|
|
|
static int qlge_close(struct net_device *ndev)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
/* If we hit pci_channel_io_perm_failure
|
|
* failure condition, then we already
|
|
* brought the adapter down.
|
|
*/
|
|
if (test_bit(QL_EEH_FATAL, &qdev->flags)) {
|
|
netif_err(qdev, drv, qdev->ndev, "EEH fatal did unload.\n");
|
|
clear_bit(QL_EEH_FATAL, &qdev->flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Wait for device to recover from a reset.
|
|
* (Rarely happens, but possible.)
|
|
*/
|
|
while (!test_bit(QL_ADAPTER_UP, &qdev->flags))
|
|
msleep(1);
|
|
ql_adapter_down(qdev);
|
|
ql_release_adapter_resources(qdev);
|
|
return 0;
|
|
}
|
|
|
|
static int ql_configure_rings(struct ql_adapter *qdev)
|
|
{
|
|
int i;
|
|
struct rx_ring *rx_ring;
|
|
struct tx_ring *tx_ring;
|
|
int cpu_cnt = min(MAX_CPUS, (int)num_online_cpus());
|
|
unsigned int lbq_buf_len = (qdev->ndev->mtu > 1500) ?
|
|
LARGE_BUFFER_MAX_SIZE : LARGE_BUFFER_MIN_SIZE;
|
|
|
|
qdev->lbq_buf_order = get_order(lbq_buf_len);
|
|
|
|
/* In a perfect world we have one RSS ring for each CPU
|
|
* and each has it's own vector. To do that we ask for
|
|
* cpu_cnt vectors. ql_enable_msix() will adjust the
|
|
* vector count to what we actually get. We then
|
|
* allocate an RSS ring for each.
|
|
* Essentially, we are doing min(cpu_count, msix_vector_count).
|
|
*/
|
|
qdev->intr_count = cpu_cnt;
|
|
ql_enable_msix(qdev);
|
|
/* Adjust the RSS ring count to the actual vector count. */
|
|
qdev->rss_ring_count = qdev->intr_count;
|
|
qdev->tx_ring_count = cpu_cnt;
|
|
qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count;
|
|
|
|
for (i = 0; i < qdev->tx_ring_count; i++) {
|
|
tx_ring = &qdev->tx_ring[i];
|
|
memset((void *)tx_ring, 0, sizeof(*tx_ring));
|
|
tx_ring->qdev = qdev;
|
|
tx_ring->wq_id = i;
|
|
tx_ring->wq_len = qdev->tx_ring_size;
|
|
tx_ring->wq_size =
|
|
tx_ring->wq_len * sizeof(struct ob_mac_iocb_req);
|
|
|
|
/*
|
|
* The completion queue ID for the tx rings start
|
|
* immediately after the rss rings.
|
|
*/
|
|
tx_ring->cq_id = qdev->rss_ring_count + i;
|
|
}
|
|
|
|
for (i = 0; i < qdev->rx_ring_count; i++) {
|
|
rx_ring = &qdev->rx_ring[i];
|
|
memset((void *)rx_ring, 0, sizeof(*rx_ring));
|
|
rx_ring->qdev = qdev;
|
|
rx_ring->cq_id = i;
|
|
rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */
|
|
if (i < qdev->rss_ring_count) {
|
|
/*
|
|
* Inbound (RSS) queues.
|
|
*/
|
|
rx_ring->cq_len = qdev->rx_ring_size;
|
|
rx_ring->cq_size =
|
|
rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb);
|
|
rx_ring->lbq_len = NUM_LARGE_BUFFERS;
|
|
rx_ring->lbq_size =
|
|
rx_ring->lbq_len * sizeof(__le64);
|
|
rx_ring->lbq_buf_size = (u16)lbq_buf_len;
|
|
rx_ring->sbq_len = NUM_SMALL_BUFFERS;
|
|
rx_ring->sbq_size =
|
|
rx_ring->sbq_len * sizeof(__le64);
|
|
rx_ring->sbq_buf_size = SMALL_BUF_MAP_SIZE;
|
|
rx_ring->type = RX_Q;
|
|
} else {
|
|
/*
|
|
* Outbound queue handles outbound completions only.
|
|
*/
|
|
/* outbound cq is same size as tx_ring it services. */
|
|
rx_ring->cq_len = qdev->tx_ring_size;
|
|
rx_ring->cq_size =
|
|
rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb);
|
|
rx_ring->lbq_len = 0;
|
|
rx_ring->lbq_size = 0;
|
|
rx_ring->lbq_buf_size = 0;
|
|
rx_ring->sbq_len = 0;
|
|
rx_ring->sbq_size = 0;
|
|
rx_ring->sbq_buf_size = 0;
|
|
rx_ring->type = TX_Q;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int qlge_open(struct net_device *ndev)
|
|
{
|
|
int err = 0;
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
err = ql_adapter_reset(qdev);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ql_configure_rings(qdev);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ql_get_adapter_resources(qdev);
|
|
if (err)
|
|
goto error_up;
|
|
|
|
err = ql_adapter_up(qdev);
|
|
if (err)
|
|
goto error_up;
|
|
|
|
return err;
|
|
|
|
error_up:
|
|
ql_release_adapter_resources(qdev);
|
|
return err;
|
|
}
|
|
|
|
static int ql_change_rx_buffers(struct ql_adapter *qdev)
|
|
{
|
|
struct rx_ring *rx_ring;
|
|
int i, status;
|
|
u32 lbq_buf_len;
|
|
|
|
/* Wait for an outstanding reset to complete. */
|
|
if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) {
|
|
int i = 4;
|
|
|
|
while (--i && !test_bit(QL_ADAPTER_UP, &qdev->flags)) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Waiting for adapter UP...\n");
|
|
ssleep(1);
|
|
}
|
|
|
|
if (!i) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Timed out waiting for adapter UP\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
status = ql_adapter_down(qdev);
|
|
if (status)
|
|
goto error;
|
|
|
|
/* Get the new rx buffer size. */
|
|
lbq_buf_len = (qdev->ndev->mtu > 1500) ?
|
|
LARGE_BUFFER_MAX_SIZE : LARGE_BUFFER_MIN_SIZE;
|
|
qdev->lbq_buf_order = get_order(lbq_buf_len);
|
|
|
|
for (i = 0; i < qdev->rss_ring_count; i++) {
|
|
rx_ring = &qdev->rx_ring[i];
|
|
/* Set the new size. */
|
|
rx_ring->lbq_buf_size = lbq_buf_len;
|
|
}
|
|
|
|
status = ql_adapter_up(qdev);
|
|
if (status)
|
|
goto error;
|
|
|
|
return status;
|
|
error:
|
|
netif_alert(qdev, ifup, qdev->ndev,
|
|
"Driver up/down cycle failed, closing device.\n");
|
|
set_bit(QL_ADAPTER_UP, &qdev->flags);
|
|
dev_close(qdev->ndev);
|
|
return status;
|
|
}
|
|
|
|
static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int status;
|
|
|
|
if (ndev->mtu == 1500 && new_mtu == 9000) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Changing to jumbo MTU.\n");
|
|
} else if (ndev->mtu == 9000 && new_mtu == 1500) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Changing to normal MTU.\n");
|
|
} else
|
|
return -EINVAL;
|
|
|
|
queue_delayed_work(qdev->workqueue,
|
|
&qdev->mpi_port_cfg_work, 3*HZ);
|
|
|
|
ndev->mtu = new_mtu;
|
|
|
|
if (!netif_running(qdev->ndev)) {
|
|
return 0;
|
|
}
|
|
|
|
status = ql_change_rx_buffers(qdev);
|
|
if (status) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Changing MTU failed.\n");
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static struct net_device_stats *qlge_get_stats(struct net_device
|
|
*ndev)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
struct rx_ring *rx_ring = &qdev->rx_ring[0];
|
|
struct tx_ring *tx_ring = &qdev->tx_ring[0];
|
|
unsigned long pkts, mcast, dropped, errors, bytes;
|
|
int i;
|
|
|
|
/* Get RX stats. */
|
|
pkts = mcast = dropped = errors = bytes = 0;
|
|
for (i = 0; i < qdev->rss_ring_count; i++, rx_ring++) {
|
|
pkts += rx_ring->rx_packets;
|
|
bytes += rx_ring->rx_bytes;
|
|
dropped += rx_ring->rx_dropped;
|
|
errors += rx_ring->rx_errors;
|
|
mcast += rx_ring->rx_multicast;
|
|
}
|
|
ndev->stats.rx_packets = pkts;
|
|
ndev->stats.rx_bytes = bytes;
|
|
ndev->stats.rx_dropped = dropped;
|
|
ndev->stats.rx_errors = errors;
|
|
ndev->stats.multicast = mcast;
|
|
|
|
/* Get TX stats. */
|
|
pkts = errors = bytes = 0;
|
|
for (i = 0; i < qdev->tx_ring_count; i++, tx_ring++) {
|
|
pkts += tx_ring->tx_packets;
|
|
bytes += tx_ring->tx_bytes;
|
|
errors += tx_ring->tx_errors;
|
|
}
|
|
ndev->stats.tx_packets = pkts;
|
|
ndev->stats.tx_bytes = bytes;
|
|
ndev->stats.tx_errors = errors;
|
|
return &ndev->stats;
|
|
}
|
|
|
|
static void qlge_set_multicast_list(struct net_device *ndev)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
struct netdev_hw_addr *ha;
|
|
int i, status;
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
|
|
if (status)
|
|
return;
|
|
/*
|
|
* Set or clear promiscuous mode if a
|
|
* transition is taking place.
|
|
*/
|
|
if (ndev->flags & IFF_PROMISC) {
|
|
if (!test_bit(QL_PROMISCUOUS, &qdev->flags)) {
|
|
if (ql_set_routing_reg
|
|
(qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) {
|
|
netif_err(qdev, hw, qdev->ndev,
|
|
"Failed to set promiscuous mode.\n");
|
|
} else {
|
|
set_bit(QL_PROMISCUOUS, &qdev->flags);
|
|
}
|
|
}
|
|
} else {
|
|
if (test_bit(QL_PROMISCUOUS, &qdev->flags)) {
|
|
if (ql_set_routing_reg
|
|
(qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) {
|
|
netif_err(qdev, hw, qdev->ndev,
|
|
"Failed to clear promiscuous mode.\n");
|
|
} else {
|
|
clear_bit(QL_PROMISCUOUS, &qdev->flags);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set or clear all multicast mode if a
|
|
* transition is taking place.
|
|
*/
|
|
if ((ndev->flags & IFF_ALLMULTI) ||
|
|
(netdev_mc_count(ndev) > MAX_MULTICAST_ENTRIES)) {
|
|
if (!test_bit(QL_ALLMULTI, &qdev->flags)) {
|
|
if (ql_set_routing_reg
|
|
(qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 1)) {
|
|
netif_err(qdev, hw, qdev->ndev,
|
|
"Failed to set all-multi mode.\n");
|
|
} else {
|
|
set_bit(QL_ALLMULTI, &qdev->flags);
|
|
}
|
|
}
|
|
} else {
|
|
if (test_bit(QL_ALLMULTI, &qdev->flags)) {
|
|
if (ql_set_routing_reg
|
|
(qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 0)) {
|
|
netif_err(qdev, hw, qdev->ndev,
|
|
"Failed to clear all-multi mode.\n");
|
|
} else {
|
|
clear_bit(QL_ALLMULTI, &qdev->flags);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!netdev_mc_empty(ndev)) {
|
|
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (status)
|
|
goto exit;
|
|
i = 0;
|
|
netdev_for_each_mc_addr(ha, ndev) {
|
|
if (ql_set_mac_addr_reg(qdev, (u8 *) ha->addr,
|
|
MAC_ADDR_TYPE_MULTI_MAC, i)) {
|
|
netif_err(qdev, hw, qdev->ndev,
|
|
"Failed to loadmulticast address.\n");
|
|
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
|
|
goto exit;
|
|
}
|
|
i++;
|
|
}
|
|
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (ql_set_routing_reg
|
|
(qdev, RT_IDX_MCAST_MATCH_SLOT, RT_IDX_MCAST_MATCH, 1)) {
|
|
netif_err(qdev, hw, qdev->ndev,
|
|
"Failed to set multicast match mode.\n");
|
|
} else {
|
|
set_bit(QL_ALLMULTI, &qdev->flags);
|
|
}
|
|
}
|
|
exit:
|
|
ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
|
|
}
|
|
|
|
static int qlge_set_mac_address(struct net_device *ndev, void *p)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
struct sockaddr *addr = p;
|
|
int status;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
|
|
/* Update local copy of current mac address. */
|
|
memcpy(qdev->current_mac_addr, ndev->dev_addr, ndev->addr_len);
|
|
|
|
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
|
|
if (status)
|
|
return status;
|
|
status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr,
|
|
MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
|
|
if (status)
|
|
netif_err(qdev, hw, qdev->ndev, "Failed to load MAC address.\n");
|
|
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
|
|
return status;
|
|
}
|
|
|
|
static void qlge_tx_timeout(struct net_device *ndev)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
ql_queue_asic_error(qdev);
|
|
}
|
|
|
|
static void ql_asic_reset_work(struct work_struct *work)
|
|
{
|
|
struct ql_adapter *qdev =
|
|
container_of(work, struct ql_adapter, asic_reset_work.work);
|
|
int status;
|
|
rtnl_lock();
|
|
status = ql_adapter_down(qdev);
|
|
if (status)
|
|
goto error;
|
|
|
|
status = ql_adapter_up(qdev);
|
|
if (status)
|
|
goto error;
|
|
|
|
/* Restore rx mode. */
|
|
clear_bit(QL_ALLMULTI, &qdev->flags);
|
|
clear_bit(QL_PROMISCUOUS, &qdev->flags);
|
|
qlge_set_multicast_list(qdev->ndev);
|
|
|
|
rtnl_unlock();
|
|
return;
|
|
error:
|
|
netif_alert(qdev, ifup, qdev->ndev,
|
|
"Driver up/down cycle failed, closing device\n");
|
|
|
|
set_bit(QL_ADAPTER_UP, &qdev->flags);
|
|
dev_close(qdev->ndev);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static const struct nic_operations qla8012_nic_ops = {
|
|
.get_flash = ql_get_8012_flash_params,
|
|
.port_initialize = ql_8012_port_initialize,
|
|
};
|
|
|
|
static const struct nic_operations qla8000_nic_ops = {
|
|
.get_flash = ql_get_8000_flash_params,
|
|
.port_initialize = ql_8000_port_initialize,
|
|
};
|
|
|
|
/* Find the pcie function number for the other NIC
|
|
* on this chip. Since both NIC functions share a
|
|
* common firmware we have the lowest enabled function
|
|
* do any common work. Examples would be resetting
|
|
* after a fatal firmware error, or doing a firmware
|
|
* coredump.
|
|
*/
|
|
static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
|
|
{
|
|
int status = 0;
|
|
u32 temp;
|
|
u32 nic_func1, nic_func2;
|
|
|
|
status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
|
|
&temp);
|
|
if (status)
|
|
return status;
|
|
|
|
nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
|
|
MPI_TEST_NIC_FUNC_MASK);
|
|
nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
|
|
MPI_TEST_NIC_FUNC_MASK);
|
|
|
|
if (qdev->func == nic_func1)
|
|
qdev->alt_func = nic_func2;
|
|
else if (qdev->func == nic_func2)
|
|
qdev->alt_func = nic_func1;
|
|
else
|
|
status = -EIO;
|
|
|
|
return status;
|
|
}
|
|
|
|
static int ql_get_board_info(struct ql_adapter *qdev)
|
|
{
|
|
int status;
|
|
qdev->func =
|
|
(ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
|
|
if (qdev->func > 3)
|
|
return -EIO;
|
|
|
|
status = ql_get_alt_pcie_func(qdev);
|
|
if (status)
|
|
return status;
|
|
|
|
qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
|
|
if (qdev->port) {
|
|
qdev->xg_sem_mask = SEM_XGMAC1_MASK;
|
|
qdev->port_link_up = STS_PL1;
|
|
qdev->port_init = STS_PI1;
|
|
qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBI;
|
|
qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBO;
|
|
} else {
|
|
qdev->xg_sem_mask = SEM_XGMAC0_MASK;
|
|
qdev->port_link_up = STS_PL0;
|
|
qdev->port_init = STS_PI0;
|
|
qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBI;
|
|
qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBO;
|
|
}
|
|
qdev->chip_rev_id = ql_read32(qdev, REV_ID);
|
|
qdev->device_id = qdev->pdev->device;
|
|
if (qdev->device_id == QLGE_DEVICE_ID_8012)
|
|
qdev->nic_ops = &qla8012_nic_ops;
|
|
else if (qdev->device_id == QLGE_DEVICE_ID_8000)
|
|
qdev->nic_ops = &qla8000_nic_ops;
|
|
return status;
|
|
}
|
|
|
|
static void ql_release_all(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
if (qdev->workqueue) {
|
|
destroy_workqueue(qdev->workqueue);
|
|
qdev->workqueue = NULL;
|
|
}
|
|
|
|
if (qdev->reg_base)
|
|
iounmap(qdev->reg_base);
|
|
if (qdev->doorbell_area)
|
|
iounmap(qdev->doorbell_area);
|
|
vfree(qdev->mpi_coredump);
|
|
pci_release_regions(pdev);
|
|
}
|
|
|
|
static int ql_init_device(struct pci_dev *pdev, struct net_device *ndev,
|
|
int cards_found)
|
|
{
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int err = 0;
|
|
|
|
memset((void *)qdev, 0, sizeof(*qdev));
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "PCI device enable failed.\n");
|
|
return err;
|
|
}
|
|
|
|
qdev->ndev = ndev;
|
|
qdev->pdev = pdev;
|
|
pci_set_drvdata(pdev, ndev);
|
|
|
|
/* Set PCIe read request size */
|
|
err = pcie_set_readrq(pdev, 4096);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Set readrq failed.\n");
|
|
goto err_out1;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "PCI region request failed.\n");
|
|
return err;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
|
|
set_bit(QL_DMA64, &qdev->flags);
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
} else {
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (!err)
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
}
|
|
|
|
if (err) {
|
|
dev_err(&pdev->dev, "No usable DMA configuration.\n");
|
|
goto err_out2;
|
|
}
|
|
|
|
/* Set PCIe reset type for EEH to fundamental. */
|
|
pdev->needs_freset = 1;
|
|
pci_save_state(pdev);
|
|
qdev->reg_base =
|
|
ioremap_nocache(pci_resource_start(pdev, 1),
|
|
pci_resource_len(pdev, 1));
|
|
if (!qdev->reg_base) {
|
|
dev_err(&pdev->dev, "Register mapping failed.\n");
|
|
err = -ENOMEM;
|
|
goto err_out2;
|
|
}
|
|
|
|
qdev->doorbell_area_size = pci_resource_len(pdev, 3);
|
|
qdev->doorbell_area =
|
|
ioremap_nocache(pci_resource_start(pdev, 3),
|
|
pci_resource_len(pdev, 3));
|
|
if (!qdev->doorbell_area) {
|
|
dev_err(&pdev->dev, "Doorbell register mapping failed.\n");
|
|
err = -ENOMEM;
|
|
goto err_out2;
|
|
}
|
|
|
|
err = ql_get_board_info(qdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Register access failed.\n");
|
|
err = -EIO;
|
|
goto err_out2;
|
|
}
|
|
qdev->msg_enable = netif_msg_init(debug, default_msg);
|
|
spin_lock_init(&qdev->hw_lock);
|
|
spin_lock_init(&qdev->stats_lock);
|
|
|
|
if (qlge_mpi_coredump) {
|
|
qdev->mpi_coredump =
|
|
vmalloc(sizeof(struct ql_mpi_coredump));
|
|
if (qdev->mpi_coredump == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_out2;
|
|
}
|
|
if (qlge_force_coredump)
|
|
set_bit(QL_FRC_COREDUMP, &qdev->flags);
|
|
}
|
|
/* make sure the EEPROM is good */
|
|
err = qdev->nic_ops->get_flash(qdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Invalid FLASH.\n");
|
|
goto err_out2;
|
|
}
|
|
|
|
/* Keep local copy of current mac address. */
|
|
memcpy(qdev->current_mac_addr, ndev->dev_addr, ndev->addr_len);
|
|
|
|
/* Set up the default ring sizes. */
|
|
qdev->tx_ring_size = NUM_TX_RING_ENTRIES;
|
|
qdev->rx_ring_size = NUM_RX_RING_ENTRIES;
|
|
|
|
/* Set up the coalescing parameters. */
|
|
qdev->rx_coalesce_usecs = DFLT_COALESCE_WAIT;
|
|
qdev->tx_coalesce_usecs = DFLT_COALESCE_WAIT;
|
|
qdev->rx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT;
|
|
qdev->tx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT;
|
|
|
|
/*
|
|
* Set up the operating parameters.
|
|
*/
|
|
qdev->workqueue = alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM,
|
|
ndev->name);
|
|
INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
|
|
INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
|
|
INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work);
|
|
INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work);
|
|
INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
|
|
INIT_DELAYED_WORK(&qdev->mpi_core_to_log, ql_mpi_core_to_log);
|
|
init_completion(&qdev->ide_completion);
|
|
mutex_init(&qdev->mpi_mutex);
|
|
|
|
if (!cards_found) {
|
|
dev_info(&pdev->dev, "%s\n", DRV_STRING);
|
|
dev_info(&pdev->dev, "Driver name: %s, Version: %s.\n",
|
|
DRV_NAME, DRV_VERSION);
|
|
}
|
|
return 0;
|
|
err_out2:
|
|
ql_release_all(pdev);
|
|
err_out1:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
static const struct net_device_ops qlge_netdev_ops = {
|
|
.ndo_open = qlge_open,
|
|
.ndo_stop = qlge_close,
|
|
.ndo_start_xmit = qlge_send,
|
|
.ndo_change_mtu = qlge_change_mtu,
|
|
.ndo_get_stats = qlge_get_stats,
|
|
.ndo_set_rx_mode = qlge_set_multicast_list,
|
|
.ndo_set_mac_address = qlge_set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_tx_timeout = qlge_tx_timeout,
|
|
.ndo_set_features = qlge_set_features,
|
|
.ndo_vlan_rx_add_vid = qlge_vlan_rx_add_vid,
|
|
.ndo_vlan_rx_kill_vid = qlge_vlan_rx_kill_vid,
|
|
};
|
|
|
|
static void ql_timer(struct timer_list *t)
|
|
{
|
|
struct ql_adapter *qdev = from_timer(qdev, t, timer);
|
|
u32 var = 0;
|
|
|
|
var = ql_read32(qdev, STS);
|
|
if (pci_channel_offline(qdev->pdev)) {
|
|
netif_err(qdev, ifup, qdev->ndev, "EEH STS = 0x%.08x.\n", var);
|
|
return;
|
|
}
|
|
|
|
mod_timer(&qdev->timer, jiffies + (5*HZ));
|
|
}
|
|
|
|
static int qlge_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_entry)
|
|
{
|
|
struct net_device *ndev = NULL;
|
|
struct ql_adapter *qdev = NULL;
|
|
static int cards_found = 0;
|
|
int err = 0;
|
|
|
|
ndev = alloc_etherdev_mq(sizeof(struct ql_adapter),
|
|
min(MAX_CPUS, netif_get_num_default_rss_queues()));
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
|
|
err = ql_init_device(pdev, ndev, cards_found);
|
|
if (err < 0) {
|
|
free_netdev(ndev);
|
|
return err;
|
|
}
|
|
|
|
qdev = netdev_priv(ndev);
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
ndev->hw_features = NETIF_F_SG |
|
|
NETIF_F_IP_CSUM |
|
|
NETIF_F_TSO |
|
|
NETIF_F_TSO_ECN |
|
|
NETIF_F_HW_VLAN_CTAG_TX |
|
|
NETIF_F_HW_VLAN_CTAG_RX |
|
|
NETIF_F_HW_VLAN_CTAG_FILTER |
|
|
NETIF_F_RXCSUM;
|
|
ndev->features = ndev->hw_features;
|
|
ndev->vlan_features = ndev->hw_features;
|
|
/* vlan gets same features (except vlan filter) */
|
|
ndev->vlan_features &= ~(NETIF_F_HW_VLAN_CTAG_FILTER |
|
|
NETIF_F_HW_VLAN_CTAG_TX |
|
|
NETIF_F_HW_VLAN_CTAG_RX);
|
|
|
|
if (test_bit(QL_DMA64, &qdev->flags))
|
|
ndev->features |= NETIF_F_HIGHDMA;
|
|
|
|
/*
|
|
* Set up net_device structure.
|
|
*/
|
|
ndev->tx_queue_len = qdev->tx_ring_size;
|
|
ndev->irq = pdev->irq;
|
|
|
|
ndev->netdev_ops = &qlge_netdev_ops;
|
|
ndev->ethtool_ops = &qlge_ethtool_ops;
|
|
ndev->watchdog_timeo = 10 * HZ;
|
|
|
|
/* MTU range: this driver only supports 1500 or 9000, so this only
|
|
* filters out values above or below, and we'll rely on
|
|
* qlge_change_mtu to make sure only 1500 or 9000 are allowed
|
|
*/
|
|
ndev->min_mtu = ETH_DATA_LEN;
|
|
ndev->max_mtu = 9000;
|
|
|
|
err = register_netdev(ndev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "net device registration failed.\n");
|
|
ql_release_all(pdev);
|
|
pci_disable_device(pdev);
|
|
free_netdev(ndev);
|
|
return err;
|
|
}
|
|
/* Start up the timer to trigger EEH if
|
|
* the bus goes dead
|
|
*/
|
|
timer_setup(&qdev->timer, ql_timer, TIMER_DEFERRABLE);
|
|
mod_timer(&qdev->timer, jiffies + (5*HZ));
|
|
ql_link_off(qdev);
|
|
ql_display_dev_info(ndev);
|
|
atomic_set(&qdev->lb_count, 0);
|
|
cards_found++;
|
|
return 0;
|
|
}
|
|
|
|
netdev_tx_t ql_lb_send(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
return qlge_send(skb, ndev);
|
|
}
|
|
|
|
int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget)
|
|
{
|
|
return ql_clean_inbound_rx_ring(rx_ring, budget);
|
|
}
|
|
|
|
static void qlge_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
del_timer_sync(&qdev->timer);
|
|
ql_cancel_all_work_sync(qdev);
|
|
unregister_netdev(ndev);
|
|
ql_release_all(pdev);
|
|
pci_disable_device(pdev);
|
|
free_netdev(ndev);
|
|
}
|
|
|
|
/* Clean up resources without touching hardware. */
|
|
static void ql_eeh_close(struct net_device *ndev)
|
|
{
|
|
int i;
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
if (netif_carrier_ok(ndev)) {
|
|
netif_carrier_off(ndev);
|
|
netif_stop_queue(ndev);
|
|
}
|
|
|
|
/* Disabling the timer */
|
|
ql_cancel_all_work_sync(qdev);
|
|
|
|
for (i = 0; i < qdev->rss_ring_count; i++)
|
|
netif_napi_del(&qdev->rx_ring[i].napi);
|
|
|
|
clear_bit(QL_ADAPTER_UP, &qdev->flags);
|
|
ql_tx_ring_clean(qdev);
|
|
ql_free_rx_buffers(qdev);
|
|
ql_release_adapter_resources(qdev);
|
|
}
|
|
|
|
/*
|
|
* This callback is called by the PCI subsystem whenever
|
|
* a PCI bus error is detected.
|
|
*/
|
|
static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev,
|
|
enum pci_channel_state state)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
switch (state) {
|
|
case pci_channel_io_normal:
|
|
return PCI_ERS_RESULT_CAN_RECOVER;
|
|
case pci_channel_io_frozen:
|
|
netif_device_detach(ndev);
|
|
del_timer_sync(&qdev->timer);
|
|
if (netif_running(ndev))
|
|
ql_eeh_close(ndev);
|
|
pci_disable_device(pdev);
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
case pci_channel_io_perm_failure:
|
|
dev_err(&pdev->dev,
|
|
"%s: pci_channel_io_perm_failure.\n", __func__);
|
|
del_timer_sync(&qdev->timer);
|
|
ql_eeh_close(ndev);
|
|
set_bit(QL_EEH_FATAL, &qdev->flags);
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
/* Request a slot reset. */
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
/*
|
|
* This callback is called after the PCI buss has been reset.
|
|
* Basically, this tries to restart the card from scratch.
|
|
* This is a shortened version of the device probe/discovery code,
|
|
* it resembles the first-half of the () routine.
|
|
*/
|
|
static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
|
|
pdev->error_state = pci_channel_io_normal;
|
|
|
|
pci_restore_state(pdev);
|
|
if (pci_enable_device(pdev)) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Cannot re-enable PCI device after reset.\n");
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
if (ql_adapter_reset(qdev)) {
|
|
netif_err(qdev, drv, qdev->ndev, "reset FAILED!\n");
|
|
set_bit(QL_EEH_FATAL, &qdev->flags);
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
static void qlge_io_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int err = 0;
|
|
|
|
if (netif_running(ndev)) {
|
|
err = qlge_open(ndev);
|
|
if (err) {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Device initialization failed after reset.\n");
|
|
return;
|
|
}
|
|
} else {
|
|
netif_err(qdev, ifup, qdev->ndev,
|
|
"Device was not running prior to EEH.\n");
|
|
}
|
|
mod_timer(&qdev->timer, jiffies + (5*HZ));
|
|
netif_device_attach(ndev);
|
|
}
|
|
|
|
static const struct pci_error_handlers qlge_err_handler = {
|
|
.error_detected = qlge_io_error_detected,
|
|
.slot_reset = qlge_io_slot_reset,
|
|
.resume = qlge_io_resume,
|
|
};
|
|
|
|
static int qlge_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int err;
|
|
|
|
netif_device_detach(ndev);
|
|
del_timer_sync(&qdev->timer);
|
|
|
|
if (netif_running(ndev)) {
|
|
err = ql_adapter_down(qdev);
|
|
if (!err)
|
|
return err;
|
|
}
|
|
|
|
ql_wol(qdev);
|
|
err = pci_save_state(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int qlge_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql_adapter *qdev = netdev_priv(ndev);
|
|
int err;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
netif_err(qdev, ifup, qdev->ndev, "Cannot enable PCI device from suspend\n");
|
|
return err;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
pci_enable_wake(pdev, PCI_D3hot, 0);
|
|
pci_enable_wake(pdev, PCI_D3cold, 0);
|
|
|
|
if (netif_running(ndev)) {
|
|
err = ql_adapter_up(qdev);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
mod_timer(&qdev->timer, jiffies + (5*HZ));
|
|
netif_device_attach(ndev);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static void qlge_shutdown(struct pci_dev *pdev)
|
|
{
|
|
qlge_suspend(pdev, PMSG_SUSPEND);
|
|
}
|
|
|
|
static struct pci_driver qlge_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = qlge_pci_tbl,
|
|
.probe = qlge_probe,
|
|
.remove = qlge_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = qlge_suspend,
|
|
.resume = qlge_resume,
|
|
#endif
|
|
.shutdown = qlge_shutdown,
|
|
.err_handler = &qlge_err_handler
|
|
};
|
|
|
|
module_pci_driver(qlge_driver);
|