45 lines
1.3 KiB
Plaintext
45 lines
1.3 KiB
Plaintext
Allwinner SRAM for smp bringup:
|
|
------------------------------------------------
|
|
|
|
Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
|
|
primary core (cpu0). Once the core gets powered up it checks if a magic
|
|
value is set at a specific location. If it is then the BROM will jump
|
|
to the software entry address, instead of executing a standard boot.
|
|
|
|
Therefore a reserved section sub-node has to be added to the mmio-sram
|
|
declaration.
|
|
|
|
Note that this is separate from the Allwinner SRAM controller found in
|
|
../../sram/sunxi-sram.txt. This SRAM is secure only and not mappable to
|
|
any device.
|
|
|
|
Also there are no "secure-only" properties. The implementation should
|
|
check if this SRAM is usable first.
|
|
|
|
Required sub-node properties:
|
|
- compatible : depending on the SoC this should be one of:
|
|
"allwinner,sun9i-a80-smp-sram"
|
|
|
|
The rest of the properties should follow the generic mmio-sram discription
|
|
found in ../../misc/sram.txt
|
|
|
|
Example:
|
|
|
|
sram_b: sram@20000 {
|
|
/* 256 KiB secure SRAM at 0x20000 */
|
|
compatible = "mmio-sram";
|
|
reg = <0x00020000 0x40000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x00020000 0x40000>;
|
|
|
|
smp-sram@1000 {
|
|
/*
|
|
* This is checked by BROM to determine if
|
|
* cpu0 should jump to SMP entry vector
|
|
*/
|
|
compatible = "allwinner,sun9i-a80-smp-sram";
|
|
reg = <0x1000 0x8>;
|
|
};
|
|
};
|