46 lines
1 KiB
Plaintext
46 lines
1 KiB
Plaintext
SiRFstar-based GNSS Receiver DT binding
|
|
|
|
SiRFstar chipsets are used in GNSS-receiver modules produced by several
|
|
vendors and can use UART, SPI or I2C interfaces.
|
|
|
|
Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
|
|
properties.
|
|
|
|
Required properties:
|
|
|
|
- compatible : Must be one of
|
|
|
|
"fastrax,uc430"
|
|
"linx,r4"
|
|
"wi2wi,w2sg0008i"
|
|
"wi2wi,w2sg0084i"
|
|
|
|
- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
|
|
|
|
Required properties (I2C):
|
|
- reg : I2C slave address
|
|
|
|
Required properties (SPI):
|
|
- reg : SPI chip select address
|
|
|
|
Optional properties:
|
|
|
|
- sirf,onoff-gpios : GPIO used to power on and off device (pin name: ON_OFF)
|
|
- sirf,wakeup-gpios : GPIO used to determine device power state
|
|
(pin name: RFPWRUP, WAKEUP)
|
|
- timepulse-gpios : Time pulse GPIO (pin name: 1PPS, TM)
|
|
|
|
Example:
|
|
|
|
serial@1234 {
|
|
compatible = "ns16550a";
|
|
|
|
gnss {
|
|
compatible = "wi2wi,w2sg0084i";
|
|
|
|
vcc-supply = <&gnss_reg>;
|
|
sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|