37 lines
1.2 KiB
Plaintext
37 lines
1.2 KiB
Plaintext
* Freescale IMX8MQ IOMUX Controller
|
|
|
|
Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
|
|
for common binding part and usage.
|
|
|
|
Required properties:
|
|
- compatible: "fsl,imx8mq-iomuxc"
|
|
- reg: should contain the base physical address and size of the iomuxc
|
|
registers.
|
|
|
|
Required properties in sub-nodes:
|
|
- fsl,pins: each entry consists of 6 integers and represents the mux and config
|
|
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
|
|
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
|
|
imx8mq-pinfunc.h under device tree source folder. The last integer CONFIG is
|
|
the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad
|
|
Reference Manual for detailed CONFIG settings.
|
|
|
|
Examples:
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
};
|
|
|
|
iomuxc: pinctrl@30330000 {
|
|
compatible = "fsl,imx8mq-iomuxc";
|
|
reg = <0x0 0x30330000 0x0 0x10000>;
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
|
|
MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
|
|
>;
|
|
};
|
|
};
|