162 lines
4.2 KiB
Plaintext
162 lines
4.2 KiB
Plaintext
Qualcomm MDM9615 TLMM block
|
|
|
|
This binding describes the Top Level Mode Multiplexer block found in the
|
|
MDM9615 platform.
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: must be "qcom,mdm9615-pinctrl"
|
|
|
|
- reg:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: the base address and size of the TLMM register space.
|
|
|
|
- interrupts:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: should specify the TLMM summary IRQ.
|
|
|
|
- interrupt-controller:
|
|
Usage: required
|
|
Value type: <none>
|
|
Definition: identifies this node as an interrupt controller
|
|
|
|
- #interrupt-cells:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: must be 2. Specifying the pin number and flags, as defined
|
|
in <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
- gpio-controller:
|
|
Usage: required
|
|
Value type: <none>
|
|
Definition: identifies this node as a gpio controller
|
|
|
|
- #gpio-cells:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: must be 2. Specifying the pin number and flags, as defined
|
|
in <dt-bindings/gpio/gpio.h>
|
|
|
|
- gpio-ranges:
|
|
Usage: required
|
|
Definition: see ../gpio/gpio.txt
|
|
|
|
- gpio-reserved-ranges:
|
|
Usage: optional
|
|
Definition: see ../gpio/gpio.txt
|
|
|
|
Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
|
|
a general description of GPIO and interrupt bindings.
|
|
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
|
common pinctrl bindings used by client devices, including the meaning of the
|
|
phrase "pin configuration node".
|
|
|
|
The pin configuration nodes act as a container for an arbitrary number of
|
|
subnodes. Each of these subnodes represents some desired configuration for a
|
|
pin, a group, or a list of pins or groups. This configuration can include the
|
|
mux function to select on those pin(s)/group(s), and various pin configuration
|
|
parameters, such as pull-up, drive strength, etc.
|
|
|
|
|
|
PIN CONFIGURATION NODES:
|
|
|
|
The name of each subnode is not important; all subnodes should be enumerated
|
|
and processed purely based on their content.
|
|
|
|
Each subnode only affects those parameters that are explicitly listed. In
|
|
other words, a subnode that lists a mux function but no pin configuration
|
|
parameters implies no information about any pin configuration parameters.
|
|
Similarly, a pin subnode that describes a pullup parameter implies no
|
|
information about e.g. the mux function.
|
|
|
|
|
|
The following generic properties as defined in pinctrl-bindings.txt are valid
|
|
to specify in a pin configuration subnode:
|
|
|
|
- pins:
|
|
Usage: required
|
|
Value type: <string-array>
|
|
Definition: List of gpio pins affected by the properties specified in
|
|
this subnode. Valid pins are:
|
|
gpio0-gpio87
|
|
|
|
- function:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: Specify the alternative function to be configured for the
|
|
specified pins.
|
|
Valid values are:
|
|
gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
|
|
sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio,
|
|
cdc_mclk
|
|
|
|
- bias-disable:
|
|
Usage: optional
|
|
Value type: <none>
|
|
Definition: The specified pins should be configued as no pull.
|
|
|
|
- bias-pull-down:
|
|
Usage: optional
|
|
Value type: <none>
|
|
Definition: The specified pins should be configued as pull down.
|
|
|
|
- bias-pull-up:
|
|
Usage: optional
|
|
Value type: <none>
|
|
Definition: The specified pins should be configued as pull up.
|
|
|
|
- output-high:
|
|
Usage: optional
|
|
Value type: <none>
|
|
Definition: The specified pins are configured in output mode, driven
|
|
high.
|
|
|
|
- output-low:
|
|
Usage: optional
|
|
Value type: <none>
|
|
Definition: The specified pins are configured in output mode, driven
|
|
low.
|
|
|
|
- drive-strength:
|
|
Usage: optional
|
|
Value type: <u32>
|
|
Definition: Selects the drive strength for the specified pins, in mA.
|
|
Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
|
|
|
|
Example:
|
|
|
|
msmgpio: pinctrl@800000 {
|
|
compatible = "qcom,mdm9615-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&msmgpio 0 0 88>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 16 0x4>;
|
|
|
|
gsbi8_uart: gsbi8-uart {
|
|
mux {
|
|
pins = "gpio34", "gpio35";
|
|
function = "gsbi8";
|
|
};
|
|
|
|
tx {
|
|
pins = "gpio34";
|
|
drive-strength = <4>;
|
|
bias-disable;
|
|
};
|
|
|
|
rx {
|
|
pins = "gpio35";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|