6db4831e98
Android 14
653 lines
17 KiB
C
653 lines
17 KiB
C
/*
|
|
* DesignWare HDMI audio driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Written and tested against the Designware HDMI Tx found in iMX6.
|
|
*/
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <drm/bridge/dw_hdmi.h>
|
|
#include <drm/drm_edid.h>
|
|
|
|
#include <sound/asoundef.h>
|
|
#include <sound/core.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_drm_eld.h>
|
|
#include <sound/pcm_iec958.h>
|
|
|
|
#include "dw-hdmi-audio.h"
|
|
|
|
#define DRIVER_NAME "dw-hdmi-ahb-audio"
|
|
|
|
/* Provide some bits rather than bit offsets */
|
|
enum {
|
|
HDMI_AHB_DMA_CONF0_SW_FIFO_RST = BIT(7),
|
|
HDMI_AHB_DMA_CONF0_EN_HLOCK = BIT(3),
|
|
HDMI_AHB_DMA_START_START = BIT(0),
|
|
HDMI_AHB_DMA_STOP_STOP = BIT(0),
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = BIT(5),
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = BIT(4),
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = BIT(3),
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = BIT(2),
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = BIT(1),
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0),
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL =
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR |
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST |
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY |
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE |
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL |
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY,
|
|
HDMI_IH_AHBDMAAUD_STAT0_ERROR = BIT(5),
|
|
HDMI_IH_AHBDMAAUD_STAT0_LOST = BIT(4),
|
|
HDMI_IH_AHBDMAAUD_STAT0_RETRY = BIT(3),
|
|
HDMI_IH_AHBDMAAUD_STAT0_DONE = BIT(2),
|
|
HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = BIT(1),
|
|
HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0),
|
|
HDMI_IH_AHBDMAAUD_STAT0_ALL =
|
|
HDMI_IH_AHBDMAAUD_STAT0_ERROR |
|
|
HDMI_IH_AHBDMAAUD_STAT0_LOST |
|
|
HDMI_IH_AHBDMAAUD_STAT0_RETRY |
|
|
HDMI_IH_AHBDMAAUD_STAT0_DONE |
|
|
HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL |
|
|
HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY,
|
|
HDMI_AHB_DMA_CONF0_INCR16 = 2 << 1,
|
|
HDMI_AHB_DMA_CONF0_INCR8 = 1 << 1,
|
|
HDMI_AHB_DMA_CONF0_INCR4 = 0,
|
|
HDMI_AHB_DMA_CONF0_BURST_MODE = BIT(0),
|
|
HDMI_AHB_DMA_MASK_DONE = BIT(7),
|
|
|
|
HDMI_REVISION_ID = 0x0001,
|
|
HDMI_IH_AHBDMAAUD_STAT0 = 0x0109,
|
|
HDMI_IH_MUTE_AHBDMAAUD_STAT0 = 0x0189,
|
|
HDMI_FC_AUDICONF2 = 0x1027,
|
|
HDMI_FC_AUDSCONF = 0x1063,
|
|
HDMI_FC_AUDSCONF_LAYOUT1 = 1 << 0,
|
|
HDMI_FC_AUDSCONF_LAYOUT0 = 0 << 0,
|
|
HDMI_AHB_DMA_CONF0 = 0x3600,
|
|
HDMI_AHB_DMA_START = 0x3601,
|
|
HDMI_AHB_DMA_STOP = 0x3602,
|
|
HDMI_AHB_DMA_THRSLD = 0x3603,
|
|
HDMI_AHB_DMA_STRADDR0 = 0x3604,
|
|
HDMI_AHB_DMA_STPADDR0 = 0x3608,
|
|
HDMI_AHB_DMA_MASK = 0x3614,
|
|
HDMI_AHB_DMA_POL = 0x3615,
|
|
HDMI_AHB_DMA_CONF1 = 0x3616,
|
|
HDMI_AHB_DMA_BUFFPOL = 0x361a,
|
|
};
|
|
|
|
struct dw_hdmi_channel_conf {
|
|
u8 conf1;
|
|
u8 ca;
|
|
};
|
|
|
|
/*
|
|
* The default mapping of ALSA channels to HDMI channels and speaker
|
|
* allocation bits. Note that we can't do channel remapping here -
|
|
* channels must be in the same order.
|
|
*
|
|
* Mappings for alsa-lib pcm/surround*.conf files:
|
|
*
|
|
* Front Sur4.0 Sur4.1 Sur5.0 Sur5.1 Sur7.1
|
|
* Channels 2 4 6 6 6 8
|
|
*
|
|
* Our mapping from ALSA channel to CEA686D speaker name and HDMI channel:
|
|
*
|
|
* Number of ALSA channels
|
|
* ALSA Channel 2 3 4 5 6 7 8
|
|
* 0 FL:0 = = = = = =
|
|
* 1 FR:1 = = = = = =
|
|
* 2 FC:3 RL:4 LFE:2 = = =
|
|
* 3 RR:5 RL:4 FC:3 = =
|
|
* 4 RR:5 RL:4 = =
|
|
* 5 RR:5 = =
|
|
* 6 RC:6 =
|
|
* 7 RLC/FRC RLC/FRC
|
|
*/
|
|
static struct dw_hdmi_channel_conf default_hdmi_channel_config[7] = {
|
|
{ 0x03, 0x00 }, /* FL,FR */
|
|
{ 0x0b, 0x02 }, /* FL,FR,FC */
|
|
{ 0x33, 0x08 }, /* FL,FR,RL,RR */
|
|
{ 0x37, 0x09 }, /* FL,FR,LFE,RL,RR */
|
|
{ 0x3f, 0x0b }, /* FL,FR,LFE,FC,RL,RR */
|
|
{ 0x7f, 0x0f }, /* FL,FR,LFE,FC,RL,RR,RC */
|
|
{ 0xff, 0x13 }, /* FL,FR,LFE,FC,RL,RR,[FR]RC,[FR]LC */
|
|
};
|
|
|
|
struct snd_dw_hdmi {
|
|
struct snd_card *card;
|
|
struct snd_pcm *pcm;
|
|
spinlock_t lock;
|
|
struct dw_hdmi_audio_data data;
|
|
struct snd_pcm_substream *substream;
|
|
void (*reformat)(struct snd_dw_hdmi *, size_t, size_t);
|
|
void *buf_src;
|
|
void *buf_dst;
|
|
dma_addr_t buf_addr;
|
|
unsigned buf_offset;
|
|
unsigned buf_period;
|
|
unsigned buf_size;
|
|
unsigned channels;
|
|
u8 revision;
|
|
u8 iec_offset;
|
|
u8 cs[192][8];
|
|
};
|
|
|
|
static void dw_hdmi_writel(u32 val, void __iomem *ptr)
|
|
{
|
|
writeb_relaxed(val, ptr);
|
|
writeb_relaxed(val >> 8, ptr + 1);
|
|
writeb_relaxed(val >> 16, ptr + 2);
|
|
writeb_relaxed(val >> 24, ptr + 3);
|
|
}
|
|
|
|
/*
|
|
* Convert to hardware format: The userspace buffer contains IEC958 samples,
|
|
* with the PCUV bits in bits 31..28 and audio samples in bits 27..4. We
|
|
* need these to be in bits 27..24, with the IEC B bit in bit 28, and audio
|
|
* samples in 23..0.
|
|
*
|
|
* Default preamble in bits 3..0: 8 = block start, 4 = even 2 = odd
|
|
*
|
|
* Ideally, we could do with having the data properly formatted in userspace.
|
|
*/
|
|
static void dw_hdmi_reformat_iec958(struct snd_dw_hdmi *dw,
|
|
size_t offset, size_t bytes)
|
|
{
|
|
u32 *src = dw->buf_src + offset;
|
|
u32 *dst = dw->buf_dst + offset;
|
|
u32 *end = dw->buf_src + offset + bytes;
|
|
|
|
do {
|
|
u32 b, sample = *src++;
|
|
|
|
b = (sample & 8) << (28 - 3);
|
|
|
|
sample >>= 4;
|
|
|
|
*dst++ = sample | b;
|
|
} while (src < end);
|
|
}
|
|
|
|
static u32 parity(u32 sample)
|
|
{
|
|
sample ^= sample >> 16;
|
|
sample ^= sample >> 8;
|
|
sample ^= sample >> 4;
|
|
sample ^= sample >> 2;
|
|
sample ^= sample >> 1;
|
|
return (sample & 1) << 27;
|
|
}
|
|
|
|
static void dw_hdmi_reformat_s24(struct snd_dw_hdmi *dw,
|
|
size_t offset, size_t bytes)
|
|
{
|
|
u32 *src = dw->buf_src + offset;
|
|
u32 *dst = dw->buf_dst + offset;
|
|
u32 *end = dw->buf_src + offset + bytes;
|
|
|
|
do {
|
|
unsigned i;
|
|
u8 *cs;
|
|
|
|
cs = dw->cs[dw->iec_offset++];
|
|
if (dw->iec_offset >= 192)
|
|
dw->iec_offset = 0;
|
|
|
|
i = dw->channels;
|
|
do {
|
|
u32 sample = *src++;
|
|
|
|
sample &= ~0xff000000;
|
|
sample |= *cs++ << 24;
|
|
sample |= parity(sample & ~0xf8000000);
|
|
|
|
*dst++ = sample;
|
|
} while (--i);
|
|
} while (src < end);
|
|
}
|
|
|
|
static void dw_hdmi_create_cs(struct snd_dw_hdmi *dw,
|
|
struct snd_pcm_runtime *runtime)
|
|
{
|
|
u8 cs[4];
|
|
unsigned ch, i, j;
|
|
|
|
snd_pcm_create_iec958_consumer(runtime, cs, sizeof(cs));
|
|
|
|
memset(dw->cs, 0, sizeof(dw->cs));
|
|
|
|
for (ch = 0; ch < 8; ch++) {
|
|
cs[2] &= ~IEC958_AES2_CON_CHANNEL;
|
|
cs[2] |= (ch + 1) << 4;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cs); i++) {
|
|
unsigned c = cs[i];
|
|
|
|
for (j = 0; j < 8; j++, c >>= 1)
|
|
dw->cs[i * 8 + j][ch] = (c & 1) << 2;
|
|
}
|
|
}
|
|
dw->cs[0][0] |= BIT(4);
|
|
}
|
|
|
|
static void dw_hdmi_start_dma(struct snd_dw_hdmi *dw)
|
|
{
|
|
void __iomem *base = dw->data.base;
|
|
unsigned offset = dw->buf_offset;
|
|
unsigned period = dw->buf_period;
|
|
u32 start, stop;
|
|
|
|
dw->reformat(dw, offset, period);
|
|
|
|
/* Clear all irqs before enabling irqs and starting DMA */
|
|
writeb_relaxed(HDMI_IH_AHBDMAAUD_STAT0_ALL,
|
|
base + HDMI_IH_AHBDMAAUD_STAT0);
|
|
|
|
start = dw->buf_addr + offset;
|
|
stop = start + period - 1;
|
|
|
|
/* Setup the hardware start/stop addresses */
|
|
dw_hdmi_writel(start, base + HDMI_AHB_DMA_STRADDR0);
|
|
dw_hdmi_writel(stop, base + HDMI_AHB_DMA_STPADDR0);
|
|
|
|
writeb_relaxed((u8)~HDMI_AHB_DMA_MASK_DONE, base + HDMI_AHB_DMA_MASK);
|
|
writeb(HDMI_AHB_DMA_START_START, base + HDMI_AHB_DMA_START);
|
|
|
|
offset += period;
|
|
if (offset >= dw->buf_size)
|
|
offset = 0;
|
|
dw->buf_offset = offset;
|
|
}
|
|
|
|
static void dw_hdmi_stop_dma(struct snd_dw_hdmi *dw)
|
|
{
|
|
/* Disable interrupts before disabling DMA */
|
|
writeb_relaxed(~0, dw->data.base + HDMI_AHB_DMA_MASK);
|
|
writeb_relaxed(HDMI_AHB_DMA_STOP_STOP, dw->data.base + HDMI_AHB_DMA_STOP);
|
|
}
|
|
|
|
static irqreturn_t snd_dw_hdmi_irq(int irq, void *data)
|
|
{
|
|
struct snd_dw_hdmi *dw = data;
|
|
struct snd_pcm_substream *substream;
|
|
unsigned stat;
|
|
|
|
stat = readb_relaxed(dw->data.base + HDMI_IH_AHBDMAAUD_STAT0);
|
|
if (!stat)
|
|
return IRQ_NONE;
|
|
|
|
writeb_relaxed(stat, dw->data.base + HDMI_IH_AHBDMAAUD_STAT0);
|
|
|
|
substream = dw->substream;
|
|
if (stat & HDMI_IH_AHBDMAAUD_STAT0_DONE && substream) {
|
|
snd_pcm_period_elapsed(substream);
|
|
|
|
spin_lock(&dw->lock);
|
|
if (dw->substream)
|
|
dw_hdmi_start_dma(dw);
|
|
spin_unlock(&dw->lock);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct snd_pcm_hardware dw_hdmi_hw = {
|
|
.info = SNDRV_PCM_INFO_INTERLEAVED |
|
|
SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
|
SNDRV_PCM_INFO_MMAP |
|
|
SNDRV_PCM_INFO_MMAP_VALID,
|
|
.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE |
|
|
SNDRV_PCM_FMTBIT_S24_LE,
|
|
.rates = SNDRV_PCM_RATE_32000 |
|
|
SNDRV_PCM_RATE_44100 |
|
|
SNDRV_PCM_RATE_48000 |
|
|
SNDRV_PCM_RATE_88200 |
|
|
SNDRV_PCM_RATE_96000 |
|
|
SNDRV_PCM_RATE_176400 |
|
|
SNDRV_PCM_RATE_192000,
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
.buffer_bytes_max = 1024 * 1024,
|
|
.period_bytes_min = 256,
|
|
.period_bytes_max = 8192, /* ERR004323: must limit to 8k */
|
|
.periods_min = 2,
|
|
.periods_max = 16,
|
|
.fifo_size = 0,
|
|
};
|
|
|
|
static int dw_hdmi_open(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_dw_hdmi *dw = substream->private_data;
|
|
void __iomem *base = dw->data.base;
|
|
int ret;
|
|
|
|
runtime->hw = dw_hdmi_hw;
|
|
|
|
ret = snd_pcm_hw_constraint_eld(runtime, dw->data.eld);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_pcm_limit_hw_rates(runtime);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_pcm_hw_constraint_integer(runtime,
|
|
SNDRV_PCM_HW_PARAM_PERIODS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Limit the buffer size to the size of the preallocated buffer */
|
|
ret = snd_pcm_hw_constraint_minmax(runtime,
|
|
SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
|
|
0, substream->dma_buffer.bytes);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Clear FIFO */
|
|
writeb_relaxed(HDMI_AHB_DMA_CONF0_SW_FIFO_RST,
|
|
base + HDMI_AHB_DMA_CONF0);
|
|
|
|
/* Configure interrupt polarities */
|
|
writeb_relaxed(~0, base + HDMI_AHB_DMA_POL);
|
|
writeb_relaxed(~0, base + HDMI_AHB_DMA_BUFFPOL);
|
|
|
|
/* Keep interrupts masked, and clear any pending */
|
|
writeb_relaxed(~0, base + HDMI_AHB_DMA_MASK);
|
|
writeb_relaxed(~0, base + HDMI_IH_AHBDMAAUD_STAT0);
|
|
|
|
ret = request_irq(dw->data.irq, snd_dw_hdmi_irq, IRQF_SHARED,
|
|
"dw-hdmi-audio", dw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Un-mute done interrupt */
|
|
writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL &
|
|
~HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE,
|
|
base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_hdmi_close(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_dw_hdmi *dw = substream->private_data;
|
|
|
|
/* Mute all interrupts */
|
|
writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL,
|
|
dw->data.base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
|
|
|
|
free_irq(dw->data.irq, dw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_hdmi_hw_free(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_pcm_lib_free_vmalloc_buffer(substream);
|
|
}
|
|
|
|
static int dw_hdmi_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
/* Allocate the PCM runtime buffer, which is exposed to userspace. */
|
|
return snd_pcm_lib_alloc_vmalloc_buffer(substream,
|
|
params_buffer_bytes(params));
|
|
}
|
|
|
|
static int dw_hdmi_prepare(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_dw_hdmi *dw = substream->private_data;
|
|
u8 threshold, conf0, conf1, layout, ca;
|
|
|
|
/* Setup as per 3.0.5 FSL 4.1.0 BSP */
|
|
switch (dw->revision) {
|
|
case 0x0a:
|
|
conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE |
|
|
HDMI_AHB_DMA_CONF0_INCR4;
|
|
if (runtime->channels == 2)
|
|
threshold = 126;
|
|
else
|
|
threshold = 124;
|
|
break;
|
|
case 0x1a:
|
|
conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE |
|
|
HDMI_AHB_DMA_CONF0_INCR8;
|
|
threshold = 128;
|
|
break;
|
|
default:
|
|
/* NOTREACHED */
|
|
return -EINVAL;
|
|
}
|
|
|
|
dw_hdmi_set_sample_rate(dw->data.hdmi, runtime->rate);
|
|
|
|
/* Minimum number of bytes in the fifo. */
|
|
runtime->hw.fifo_size = threshold * 32;
|
|
|
|
conf0 |= HDMI_AHB_DMA_CONF0_EN_HLOCK;
|
|
conf1 = default_hdmi_channel_config[runtime->channels - 2].conf1;
|
|
ca = default_hdmi_channel_config[runtime->channels - 2].ca;
|
|
|
|
/*
|
|
* For >2 channel PCM audio, we need to select layout 1
|
|
* and set an appropriate channel map.
|
|
*/
|
|
if (runtime->channels > 2)
|
|
layout = HDMI_FC_AUDSCONF_LAYOUT1;
|
|
else
|
|
layout = HDMI_FC_AUDSCONF_LAYOUT0;
|
|
|
|
writeb_relaxed(threshold, dw->data.base + HDMI_AHB_DMA_THRSLD);
|
|
writeb_relaxed(conf0, dw->data.base + HDMI_AHB_DMA_CONF0);
|
|
writeb_relaxed(conf1, dw->data.base + HDMI_AHB_DMA_CONF1);
|
|
writeb_relaxed(layout, dw->data.base + HDMI_FC_AUDSCONF);
|
|
writeb_relaxed(ca, dw->data.base + HDMI_FC_AUDICONF2);
|
|
|
|
switch (runtime->format) {
|
|
case SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE:
|
|
dw->reformat = dw_hdmi_reformat_iec958;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
dw_hdmi_create_cs(dw, runtime);
|
|
dw->reformat = dw_hdmi_reformat_s24;
|
|
break;
|
|
}
|
|
dw->iec_offset = 0;
|
|
dw->channels = runtime->channels;
|
|
dw->buf_src = runtime->dma_area;
|
|
dw->buf_dst = substream->dma_buffer.area;
|
|
dw->buf_addr = substream->dma_buffer.addr;
|
|
dw->buf_period = snd_pcm_lib_period_bytes(substream);
|
|
dw->buf_size = snd_pcm_lib_buffer_bytes(substream);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_hdmi_trigger(struct snd_pcm_substream *substream, int cmd)
|
|
{
|
|
struct snd_dw_hdmi *dw = substream->private_data;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
spin_lock_irqsave(&dw->lock, flags);
|
|
dw->buf_offset = 0;
|
|
dw->substream = substream;
|
|
dw_hdmi_start_dma(dw);
|
|
dw_hdmi_audio_enable(dw->data.hdmi);
|
|
spin_unlock_irqrestore(&dw->lock, flags);
|
|
substream->runtime->delay = substream->runtime->period_size;
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
spin_lock_irqsave(&dw->lock, flags);
|
|
dw->substream = NULL;
|
|
dw_hdmi_stop_dma(dw);
|
|
dw_hdmi_audio_disable(dw->data.hdmi);
|
|
spin_unlock_irqrestore(&dw->lock, flags);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static snd_pcm_uframes_t dw_hdmi_pointer(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_dw_hdmi *dw = substream->private_data;
|
|
|
|
/*
|
|
* We are unable to report the exact hardware position as
|
|
* reading the 32-bit DMA position using 8-bit reads is racy.
|
|
*/
|
|
return bytes_to_frames(runtime, dw->buf_offset);
|
|
}
|
|
|
|
static const struct snd_pcm_ops snd_dw_hdmi_ops = {
|
|
.open = dw_hdmi_open,
|
|
.close = dw_hdmi_close,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = dw_hdmi_hw_params,
|
|
.hw_free = dw_hdmi_hw_free,
|
|
.prepare = dw_hdmi_prepare,
|
|
.trigger = dw_hdmi_trigger,
|
|
.pointer = dw_hdmi_pointer,
|
|
.page = snd_pcm_lib_get_vmalloc_page,
|
|
};
|
|
|
|
static int snd_dw_hdmi_probe(struct platform_device *pdev)
|
|
{
|
|
const struct dw_hdmi_audio_data *data = pdev->dev.platform_data;
|
|
struct device *dev = pdev->dev.parent;
|
|
struct snd_dw_hdmi *dw;
|
|
struct snd_card *card;
|
|
struct snd_pcm *pcm;
|
|
unsigned revision;
|
|
int ret;
|
|
|
|
writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL,
|
|
data->base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
|
|
revision = readb_relaxed(data->base + HDMI_REVISION_ID);
|
|
if (revision != 0x0a && revision != 0x1a) {
|
|
dev_err(dev, "dw-hdmi-audio: unknown revision 0x%02x\n",
|
|
revision);
|
|
return -ENXIO;
|
|
}
|
|
|
|
ret = snd_card_new(dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
|
|
THIS_MODULE, sizeof(struct snd_dw_hdmi), &card);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver));
|
|
strlcpy(card->shortname, "DW-HDMI", sizeof(card->shortname));
|
|
snprintf(card->longname, sizeof(card->longname),
|
|
"%s rev 0x%02x, irq %d", card->shortname, revision,
|
|
data->irq);
|
|
|
|
dw = card->private_data;
|
|
dw->card = card;
|
|
dw->data = *data;
|
|
dw->revision = revision;
|
|
|
|
spin_lock_init(&dw->lock);
|
|
|
|
ret = snd_pcm_new(card, "DW HDMI", 0, 1, 0, &pcm);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
dw->pcm = pcm;
|
|
pcm->private_data = dw;
|
|
strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_dw_hdmi_ops);
|
|
|
|
/*
|
|
* To support 8-channel 96kHz audio reliably, we need 512k
|
|
* to satisfy alsa with our restricted period (ERR004323).
|
|
*/
|
|
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
dev, 128 * 1024, 1024 * 1024);
|
|
|
|
ret = snd_card_register(card);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
platform_set_drvdata(pdev, dw);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
snd_card_free(card);
|
|
return ret;
|
|
}
|
|
|
|
static int snd_dw_hdmi_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_dw_hdmi *dw = platform_get_drvdata(pdev);
|
|
|
|
snd_card_free(dw->card);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_PM_SLEEP) && defined(IS_NOT_BROKEN)
|
|
/*
|
|
* This code is fine, but requires implementation in the dw_hdmi_trigger()
|
|
* method which is currently missing as I have no way to test this.
|
|
*/
|
|
static int snd_dw_hdmi_suspend(struct device *dev)
|
|
{
|
|
struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
|
|
|
|
snd_power_change_state(dw->card, SNDRV_CTL_POWER_D3cold);
|
|
snd_pcm_suspend_all(dw->pcm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int snd_dw_hdmi_resume(struct device *dev)
|
|
{
|
|
struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
|
|
|
|
snd_power_change_state(dw->card, SNDRV_CTL_POWER_D0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(snd_dw_hdmi_pm, snd_dw_hdmi_suspend,
|
|
snd_dw_hdmi_resume);
|
|
#define PM_OPS &snd_dw_hdmi_pm
|
|
#else
|
|
#define PM_OPS NULL
|
|
#endif
|
|
|
|
static struct platform_driver snd_dw_hdmi_driver = {
|
|
.probe = snd_dw_hdmi_probe,
|
|
.remove = snd_dw_hdmi_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.pm = PM_OPS,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(snd_dw_hdmi_driver);
|
|
|
|
MODULE_AUTHOR("Russell King <rmk+kernel@arm.linux.org.uk>");
|
|
MODULE_DESCRIPTION("Synopsis Designware HDMI AHB ALSA interface");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|