kernel_samsung_a34x-permissive/drivers/leds/leds-lp5562.c
2024-04-28 15:51:13 +02:00

622 lines
15 KiB
C

/*
* LP5562 LED driver
*
* Copyright (C) 2013 Texas Instruments
*
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_data/leds-lp55xx.h>
#include <linux/slab.h>
#include "leds-lp55xx-common.h"
#define LP5562_PROGRAM_LENGTH 32
#define LP5562_MAX_LEDS 4
/* ENABLE Register 00h */
#define LP5562_REG_ENABLE 0x00
#define LP5562_EXEC_ENG1_M 0x30
#define LP5562_EXEC_ENG2_M 0x0C
#define LP5562_EXEC_ENG3_M 0x03
#define LP5562_EXEC_M 0x3F
#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
#define LP5562_EXEC_RUN 0x2A
#define LP5562_ENABLE_DEFAULT \
(LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
#define LP5562_ENABLE_RUN_PROGRAM \
(LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
/* OPMODE Register 01h */
#define LP5562_REG_OP_MODE 0x01
#define LP5562_MODE_ENG1_M 0x30
#define LP5562_MODE_ENG2_M 0x0C
#define LP5562_MODE_ENG3_M 0x03
#define LP5562_LOAD_ENG1 0x10
#define LP5562_LOAD_ENG2 0x04
#define LP5562_LOAD_ENG3 0x01
#define LP5562_RUN_ENG1 0x20
#define LP5562_RUN_ENG2 0x08
#define LP5562_RUN_ENG3 0x02
#define LP5562_ENG1_IS_LOADING(mode) \
((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
#define LP5562_ENG2_IS_LOADING(mode) \
((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
#define LP5562_ENG3_IS_LOADING(mode) \
((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
/* BRIGHTNESS Registers */
#define LP5562_REG_R_PWM 0x04
#define LP5562_REG_G_PWM 0x03
#define LP5562_REG_B_PWM 0x02
#define LP5562_REG_W_PWM 0x0E
/* CURRENT Registers */
#define LP5562_REG_R_CURRENT 0x07
#define LP5562_REG_G_CURRENT 0x06
#define LP5562_REG_B_CURRENT 0x05
#define LP5562_REG_W_CURRENT 0x0F
/* CONFIG Register 08h */
#define LP5562_REG_CONFIG 0x08
#define LP5562_PWM_HF 0x40
#define LP5562_PWRSAVE_EN 0x20
#define LP5562_CLK_INT 0x01 /* Internal clock */
#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
/* RESET Register 0Dh */
#define LP5562_REG_RESET 0x0D
#define LP5562_RESET 0xFF
/* PROGRAM ENGINE Registers */
#define LP5562_REG_PROG_MEM_ENG1 0x10
#define LP5562_REG_PROG_MEM_ENG2 0x30
#define LP5562_REG_PROG_MEM_ENG3 0x50
/* LEDMAP Register 70h */
#define LP5562_REG_ENG_SEL 0x70
#define LP5562_ENG_SEL_PWM 0
#define LP5562_ENG_FOR_RGB_M 0x3F
#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
#define LP5562_ENG_FOR_W_M 0xC0
#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
/* Program Commands */
#define LP5562_CMD_DISABLE 0x00
#define LP5562_CMD_LOAD 0x15
#define LP5562_CMD_RUN 0x2A
#define LP5562_CMD_DIRECT 0x3F
#define LP5562_PATTERN_OFF 0
static inline void lp5562_wait_opmode_done(void)
{
/* operation mode change needs to be longer than 153 us */
usleep_range(200, 300);
}
static inline void lp5562_wait_enable_done(void)
{
/* it takes more 488 us to update ENABLE register */
usleep_range(500, 600);
}
static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
{
static const u8 addr[] = {
LP5562_REG_R_CURRENT,
LP5562_REG_G_CURRENT,
LP5562_REG_B_CURRENT,
LP5562_REG_W_CURRENT,
};
led->led_current = led_current;
lp55xx_write(led->chip, addr[led->chan_nr], led_current);
}
static void lp5562_load_engine(struct lp55xx_chip *chip)
{
enum lp55xx_engine_index idx = chip->engine_idx;
static const u8 mask[] = {
[LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
[LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
[LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
};
static const u8 val[] = {
[LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
[LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
[LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
};
lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
lp5562_wait_opmode_done();
}
static void lp5562_stop_engine(struct lp55xx_chip *chip)
{
lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
lp5562_wait_opmode_done();
}
static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
{
int ret;
u8 mode;
u8 exec;
/* stop engine */
if (!start) {
lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
lp5562_wait_enable_done();
lp5562_stop_engine(chip);
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
lp5562_wait_opmode_done();
return;
}
/*
* To run the engine,
* operation mode and enable register should updated at the same time
*/
ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
if (ret)
return;
ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
if (ret)
return;
/* change operation mode to RUN only when each engine is loading */
if (LP5562_ENG1_IS_LOADING(mode)) {
mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
}
if (LP5562_ENG2_IS_LOADING(mode)) {
mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
}
if (LP5562_ENG3_IS_LOADING(mode)) {
mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
}
lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
lp5562_wait_opmode_done();
lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
lp5562_wait_enable_done();
}
static int lp5562_update_firmware(struct lp55xx_chip *chip,
const u8 *data, size_t size)
{
enum lp55xx_engine_index idx = chip->engine_idx;
u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
static const u8 addr[] = {
[LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
[LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
[LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
};
unsigned cmd;
char c[3];
int program_size;
int nrchars;
int offset = 0;
int ret;
int i;
/* clear program memory before updating */
for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
lp55xx_write(chip, addr[idx] + i, 0);
i = 0;
while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
/* separate sscanfs because length is working only for %s */
ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
if (ret != 1)
goto err;
ret = sscanf(c, "%2x", &cmd);
if (ret != 1)
goto err;
pattern[i] = (u8)cmd;
offset += nrchars;
i++;
}
/* Each instruction is 16bit long. Check that length is even */
if (i % 2)
goto err;
program_size = i;
for (i = 0; i < program_size; i++)
lp55xx_write(chip, addr[idx] + i, pattern[i]);
return 0;
err:
dev_err(&chip->cl->dev, "wrong pattern format\n");
return -EINVAL;
}
static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
{
const struct firmware *fw = chip->fw;
/*
* the firmware is encoded in ascii hex character, with 2 chars
* per byte
*/
if (fw->size > (LP5562_PROGRAM_LENGTH * 2)) {
dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
fw->size);
return;
}
/*
* Program memory sequence
* 1) set engine mode to "LOAD"
* 2) write firmware data into program memory
*/
lp5562_load_engine(chip);
lp5562_update_firmware(chip, fw->data, fw->size);
}
static int lp5562_post_init_device(struct lp55xx_chip *chip)
{
int ret;
u8 cfg = LP5562_DEFAULT_CFG;
/* Set all PWMs to direct control mode */
ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
if (ret)
return ret;
lp5562_wait_opmode_done();
/* Update configuration for the clock setting */
if (!lp55xx_is_extclk_used(chip))
cfg |= LP5562_CLK_INT;
ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
if (ret)
return ret;
/* Initialize all channels PWM to zero -> leds off */
lp55xx_write(chip, LP5562_REG_R_PWM, 0);
lp55xx_write(chip, LP5562_REG_G_PWM, 0);
lp55xx_write(chip, LP5562_REG_B_PWM, 0);
lp55xx_write(chip, LP5562_REG_W_PWM, 0);
/* Set LED map as register PWM by default */
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
return 0;
}
static int lp5562_led_brightness(struct lp55xx_led *led)
{
struct lp55xx_chip *chip = led->chip;
static const u8 addr[] = {
LP5562_REG_R_PWM,
LP5562_REG_G_PWM,
LP5562_REG_B_PWM,
LP5562_REG_W_PWM,
};
int ret;
mutex_lock(&chip->lock);
ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness);
mutex_unlock(&chip->lock);
return ret;
}
static void lp5562_write_program_memory(struct lp55xx_chip *chip,
u8 base, const u8 *rgb, int size)
{
int i;
if (!rgb || size <= 0)
return;
for (i = 0; i < size; i++)
lp55xx_write(chip, base + i, *(rgb + i));
lp55xx_write(chip, base + i, 0);
lp55xx_write(chip, base + i + 1, 0);
}
/* check the size of program count */
static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
{
return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
ptn->size_g >= LP5562_PROGRAM_LENGTH ||
ptn->size_b >= LP5562_PROGRAM_LENGTH;
}
static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
{
struct lp55xx_predef_pattern *ptn;
int i;
if (mode == LP5562_PATTERN_OFF) {
lp5562_run_engine(chip, false);
return 0;
}
ptn = chip->pdata->patterns + (mode - 1);
if (!ptn || _is_pc_overflow(ptn)) {
dev_err(&chip->cl->dev, "invalid pattern data\n");
return -EINVAL;
}
lp5562_stop_engine(chip);
/* Set LED map as RGB */
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
/* Load engines */
for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
chip->engine_idx = i;
lp5562_load_engine(chip);
}
/* Clear program registers */
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
/* Program engines */
lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
ptn->r, ptn->size_r);
lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
ptn->g, ptn->size_g);
lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
ptn->b, ptn->size_b);
/* Run engines */
lp5562_run_engine(chip, true);
return 0;
}
static ssize_t lp5562_store_pattern(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
struct lp55xx_chip *chip = led->chip;
struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
int num_patterns = chip->pdata->num_patterns;
unsigned long mode;
int ret;
ret = kstrtoul(buf, 0, &mode);
if (ret)
return ret;
if (mode > num_patterns || !ptn)
return -EINVAL;
mutex_lock(&chip->lock);
ret = lp5562_run_predef_led_pattern(chip, mode);
mutex_unlock(&chip->lock);
if (ret)
return ret;
return len;
}
static ssize_t lp5562_store_engine_mux(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
struct lp55xx_chip *chip = led->chip;
u8 mask;
u8 val;
/* LED map
* R ... Engine 1 (fixed)
* G ... Engine 2 (fixed)
* B ... Engine 3 (fixed)
* W ... Engine 1 or 2 or 3
*/
if (sysfs_streq(buf, "RGB")) {
mask = LP5562_ENG_FOR_RGB_M;
val = LP5562_ENG_SEL_RGB;
} else if (sysfs_streq(buf, "W")) {
enum lp55xx_engine_index idx = chip->engine_idx;
mask = LP5562_ENG_FOR_W_M;
switch (idx) {
case LP55XX_ENGINE_1:
val = LP5562_ENG1_FOR_W;
break;
case LP55XX_ENGINE_2:
val = LP5562_ENG2_FOR_W;
break;
case LP55XX_ENGINE_3:
val = LP5562_ENG3_FOR_W;
break;
default:
return -EINVAL;
}
} else {
dev_err(dev, "choose RGB or W\n");
return -EINVAL;
}
mutex_lock(&chip->lock);
lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
mutex_unlock(&chip->lock);
return len;
}
static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
static struct attribute *lp5562_attributes[] = {
&dev_attr_led_pattern.attr,
&dev_attr_engine_mux.attr,
NULL,
};
static const struct attribute_group lp5562_group = {
.attrs = lp5562_attributes,
};
/* Chip specific configurations */
static struct lp55xx_device_config lp5562_cfg = {
.max_channel = LP5562_MAX_LEDS,
.reset = {
.addr = LP5562_REG_RESET,
.val = LP5562_RESET,
},
.enable = {
.addr = LP5562_REG_ENABLE,
.val = LP5562_ENABLE_DEFAULT,
},
.post_init_device = lp5562_post_init_device,
.set_led_current = lp5562_set_led_current,
.brightness_fn = lp5562_led_brightness,
.run_engine = lp5562_run_engine,
.firmware_cb = lp5562_firmware_loaded,
.dev_attr_group = &lp5562_group,
};
static int lp5562_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct lp55xx_chip *chip;
struct lp55xx_led *led;
struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
struct device_node *np = client->dev.of_node;
if (!pdata) {
if (np) {
pdata = lp55xx_of_populate_pdata(&client->dev, np);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
} else {
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
}
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
led = devm_kcalloc(&client->dev,
pdata->num_channels, sizeof(*led), GFP_KERNEL);
if (!led)
return -ENOMEM;
chip->cl = client;
chip->pdata = pdata;
chip->cfg = &lp5562_cfg;
mutex_init(&chip->lock);
i2c_set_clientdata(client, led);
ret = lp55xx_init_device(chip);
if (ret)
goto err_init;
ret = lp55xx_register_leds(led, chip);
if (ret)
goto err_register_leds;
ret = lp55xx_register_sysfs(chip);
if (ret) {
dev_err(&client->dev, "registering sysfs failed\n");
goto err_register_sysfs;
}
return 0;
err_register_sysfs:
lp55xx_unregister_leds(led, chip);
err_register_leds:
lp55xx_deinit_device(chip);
err_init:
return ret;
}
static int lp5562_remove(struct i2c_client *client)
{
struct lp55xx_led *led = i2c_get_clientdata(client);
struct lp55xx_chip *chip = led->chip;
lp5562_stop_engine(chip);
lp55xx_unregister_sysfs(chip);
lp55xx_unregister_leds(led, chip);
lp55xx_deinit_device(chip);
return 0;
}
static const struct i2c_device_id lp5562_id[] = {
{ "lp5562", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lp5562_id);
#ifdef CONFIG_OF
static const struct of_device_id of_lp5562_leds_match[] = {
{ .compatible = "ti,lp5562", },
{},
};
MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
#endif
static struct i2c_driver lp5562_driver = {
.driver = {
.name = "lp5562",
.of_match_table = of_match_ptr(of_lp5562_leds_match),
},
.probe = lp5562_probe,
.remove = lp5562_remove,
.id_table = lp5562_id,
};
module_i2c_driver(lp5562_driver);
MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");