242 lines
7.4 KiB
C
242 lines
7.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* cec-pin-priv.h - internal cec-pin header
|
|
*
|
|
* Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
|
|
*/
|
|
|
|
#ifndef LINUX_CEC_PIN_PRIV_H
|
|
#define LINUX_CEC_PIN_PRIV_H
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/atomic.h>
|
|
#include <media/cec-pin.h>
|
|
|
|
enum cec_pin_state {
|
|
/* CEC is off */
|
|
CEC_ST_OFF,
|
|
/* CEC is idle, waiting for Rx or Tx */
|
|
CEC_ST_IDLE,
|
|
|
|
/* Tx states */
|
|
|
|
/* Pending Tx, waiting for Signal Free Time to expire */
|
|
CEC_ST_TX_WAIT,
|
|
/* Low-drive was detected, wait for bus to go high */
|
|
CEC_ST_TX_WAIT_FOR_HIGH,
|
|
/* Drive CEC low for the start bit */
|
|
CEC_ST_TX_START_BIT_LOW,
|
|
/* Drive CEC high for the start bit */
|
|
CEC_ST_TX_START_BIT_HIGH,
|
|
/* Generate a start bit period that is too short */
|
|
CEC_ST_TX_START_BIT_HIGH_SHORT,
|
|
/* Generate a start bit period that is too long */
|
|
CEC_ST_TX_START_BIT_HIGH_LONG,
|
|
/* Drive CEC low for the start bit using the custom timing */
|
|
CEC_ST_TX_START_BIT_LOW_CUSTOM,
|
|
/* Drive CEC high for the start bit using the custom timing */
|
|
CEC_ST_TX_START_BIT_HIGH_CUSTOM,
|
|
/* Drive CEC low for the 0 bit */
|
|
CEC_ST_TX_DATA_BIT_0_LOW,
|
|
/* Drive CEC high for the 0 bit */
|
|
CEC_ST_TX_DATA_BIT_0_HIGH,
|
|
/* Generate a bit period that is too short */
|
|
CEC_ST_TX_DATA_BIT_0_HIGH_SHORT,
|
|
/* Generate a bit period that is too long */
|
|
CEC_ST_TX_DATA_BIT_0_HIGH_LONG,
|
|
/* Drive CEC low for the 1 bit */
|
|
CEC_ST_TX_DATA_BIT_1_LOW,
|
|
/* Drive CEC high for the 1 bit */
|
|
CEC_ST_TX_DATA_BIT_1_HIGH,
|
|
/* Generate a bit period that is too short */
|
|
CEC_ST_TX_DATA_BIT_1_HIGH_SHORT,
|
|
/* Generate a bit period that is too long */
|
|
CEC_ST_TX_DATA_BIT_1_HIGH_LONG,
|
|
/*
|
|
* Wait for start of sample time to check for Ack bit or first
|
|
* four initiator bits to check for Arbitration Lost.
|
|
*/
|
|
CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE,
|
|
/* Wait for end of bit period after sampling */
|
|
CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE,
|
|
/* Generate a bit period that is too short */
|
|
CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT,
|
|
/* Generate a bit period that is too long */
|
|
CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG,
|
|
/* Drive CEC low for a data bit using the custom timing */
|
|
CEC_ST_TX_DATA_BIT_LOW_CUSTOM,
|
|
/* Drive CEC high for a data bit using the custom timing */
|
|
CEC_ST_TX_DATA_BIT_HIGH_CUSTOM,
|
|
/* Drive CEC low for a standalone pulse using the custom timing */
|
|
CEC_ST_TX_PULSE_LOW_CUSTOM,
|
|
/* Drive CEC high for a standalone pulse using the custom timing */
|
|
CEC_ST_TX_PULSE_HIGH_CUSTOM,
|
|
/* Start low drive */
|
|
CEC_ST_TX_LOW_DRIVE,
|
|
|
|
/* Rx states */
|
|
|
|
/* Start bit low detected */
|
|
CEC_ST_RX_START_BIT_LOW,
|
|
/* Start bit high detected */
|
|
CEC_ST_RX_START_BIT_HIGH,
|
|
/* Wait for bit sample time */
|
|
CEC_ST_RX_DATA_SAMPLE,
|
|
/* Wait for earliest end of bit period after sampling */
|
|
CEC_ST_RX_DATA_POST_SAMPLE,
|
|
/* Wait for CEC to go low (i.e. end of bit period) */
|
|
CEC_ST_RX_DATA_WAIT_FOR_LOW,
|
|
/* Drive CEC low to send 0 Ack bit */
|
|
CEC_ST_RX_ACK_LOW,
|
|
/* End of 0 Ack time, wait for earliest end of bit period */
|
|
CEC_ST_RX_ACK_LOW_POST,
|
|
/* Wait for CEC to go high (i.e. end of bit period */
|
|
CEC_ST_RX_ACK_HIGH_POST,
|
|
/* Wait for earliest end of bit period and end of message */
|
|
CEC_ST_RX_ACK_FINISH,
|
|
/* Start low drive */
|
|
CEC_ST_RX_LOW_DRIVE,
|
|
|
|
/* Monitor pin using interrupts */
|
|
CEC_ST_RX_IRQ,
|
|
|
|
/* Total number of pin states */
|
|
CEC_PIN_STATES
|
|
};
|
|
|
|
/* Error Injection */
|
|
|
|
/* Error injection modes */
|
|
#define CEC_ERROR_INJ_MODE_OFF 0
|
|
#define CEC_ERROR_INJ_MODE_ONCE 1
|
|
#define CEC_ERROR_INJ_MODE_ALWAYS 2
|
|
#define CEC_ERROR_INJ_MODE_TOGGLE 3
|
|
#define CEC_ERROR_INJ_MODE_MASK 3ULL
|
|
|
|
/* Receive error injection options */
|
|
#define CEC_ERROR_INJ_RX_NACK_OFFSET 0
|
|
#define CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET 2
|
|
#define CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET 4
|
|
#define CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET 6
|
|
#define CEC_ERROR_INJ_RX_ARB_LOST_OFFSET 8
|
|
#define CEC_ERROR_INJ_RX_MASK 0xffffULL
|
|
|
|
/* Transmit error injection options */
|
|
#define CEC_ERROR_INJ_TX_NO_EOM_OFFSET 16
|
|
#define CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET 18
|
|
#define CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET 20
|
|
#define CEC_ERROR_INJ_TX_LONG_BIT_OFFSET 22
|
|
#define CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET 24
|
|
#define CEC_ERROR_INJ_TX_SHORT_START_OFFSET 26
|
|
#define CEC_ERROR_INJ_TX_LONG_START_OFFSET 28
|
|
#define CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET 30
|
|
#define CEC_ERROR_INJ_TX_LAST_BIT_OFFSET 32
|
|
#define CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET 34
|
|
#define CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET 36
|
|
#define CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET 38
|
|
#define CEC_ERROR_INJ_TX_MASK 0xffffffffffff0000ULL
|
|
|
|
#define CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX 0
|
|
#define CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX 1
|
|
|
|
#define CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX 2
|
|
#define CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX 3
|
|
#define CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX 4
|
|
#define CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX 5
|
|
#define CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX 6
|
|
#define CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX 7
|
|
#define CEC_ERROR_INJ_NUM_ARGS 8
|
|
|
|
/* Special CEC op values */
|
|
#define CEC_ERROR_INJ_OP_ANY 0x00000100
|
|
|
|
/* The default for the low/high time of the custom pulse */
|
|
#define CEC_TIM_CUSTOM_DEFAULT 1000
|
|
|
|
#define CEC_NUM_PIN_EVENTS 128
|
|
#define CEC_PIN_EVENT_FL_IS_HIGH (1 << 0)
|
|
#define CEC_PIN_EVENT_FL_DROPPED (1 << 1)
|
|
|
|
#define CEC_PIN_IRQ_UNCHANGED 0
|
|
#define CEC_PIN_IRQ_DISABLE 1
|
|
#define CEC_PIN_IRQ_ENABLE 2
|
|
|
|
struct cec_pin {
|
|
struct cec_adapter *adap;
|
|
const struct cec_pin_ops *ops;
|
|
struct task_struct *kthread;
|
|
wait_queue_head_t kthread_waitq;
|
|
struct hrtimer timer;
|
|
ktime_t ts;
|
|
unsigned int wait_usecs;
|
|
u16 la_mask;
|
|
bool enabled;
|
|
bool monitor_all;
|
|
bool rx_eom;
|
|
bool enable_irq_failed;
|
|
enum cec_pin_state state;
|
|
struct cec_msg tx_msg;
|
|
u32 tx_bit;
|
|
bool tx_nacked;
|
|
u32 tx_signal_free_time;
|
|
bool tx_toggle;
|
|
struct cec_msg rx_msg;
|
|
u32 rx_bit;
|
|
bool rx_toggle;
|
|
u32 rx_start_bit_low_too_short_cnt;
|
|
u64 rx_start_bit_low_too_short_ts;
|
|
u32 rx_start_bit_low_too_short_delta;
|
|
u32 rx_start_bit_too_short_cnt;
|
|
u64 rx_start_bit_too_short_ts;
|
|
u32 rx_start_bit_too_short_delta;
|
|
u32 rx_start_bit_too_long_cnt;
|
|
u32 rx_data_bit_too_short_cnt;
|
|
u64 rx_data_bit_too_short_ts;
|
|
u32 rx_data_bit_too_short_delta;
|
|
u32 rx_data_bit_too_long_cnt;
|
|
u32 rx_low_drive_cnt;
|
|
|
|
struct cec_msg work_rx_msg;
|
|
u8 work_tx_status;
|
|
ktime_t work_tx_ts;
|
|
atomic_t work_irq_change;
|
|
atomic_t work_pin_num_events;
|
|
unsigned int work_pin_events_wr;
|
|
unsigned int work_pin_events_rd;
|
|
ktime_t work_pin_ts[CEC_NUM_PIN_EVENTS];
|
|
u8 work_pin_events[CEC_NUM_PIN_EVENTS];
|
|
bool work_pin_events_dropped;
|
|
u32 work_pin_events_dropped_cnt;
|
|
ktime_t timer_ts;
|
|
u32 timer_cnt;
|
|
u32 timer_100ms_overruns;
|
|
u32 timer_300ms_overruns;
|
|
u32 timer_max_overrun;
|
|
u32 timer_sum_overrun;
|
|
|
|
u32 tx_custom_low_usecs;
|
|
u32 tx_custom_high_usecs;
|
|
bool tx_ignore_nack_until_eom;
|
|
bool tx_custom_pulse;
|
|
bool tx_generated_poll;
|
|
bool tx_post_eom;
|
|
u8 tx_extra_bytes;
|
|
u32 tx_low_drive_cnt;
|
|
#ifdef CONFIG_CEC_PIN_ERROR_INJ
|
|
u64 error_inj[CEC_ERROR_INJ_OP_ANY + 1];
|
|
u8 error_inj_args[CEC_ERROR_INJ_OP_ANY + 1][CEC_ERROR_INJ_NUM_ARGS];
|
|
#endif
|
|
};
|
|
|
|
void cec_pin_start_timer(struct cec_pin *pin);
|
|
|
|
#ifdef CONFIG_CEC_PIN_ERROR_INJ
|
|
bool cec_pin_error_inj_parse_line(struct cec_adapter *adap, char *line);
|
|
int cec_pin_error_inj_show(struct cec_adapter *adap, struct seq_file *sf);
|
|
|
|
u16 cec_pin_rx_error_inj(struct cec_pin *pin);
|
|
u16 cec_pin_tx_error_inj(struct cec_pin *pin);
|
|
#endif
|
|
|
|
#endif
|