6db4831e98
Android 14
778 lines
18 KiB
C
778 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
* Copyright (C) 2004 Infineon IFAP DC COM CPE
|
|
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright (C) 2007 John Crispin <john@phrozen.org>
|
|
* Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com>
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <lantiq_soc.h>
|
|
|
|
#define PORT_LTQ_ASC 111
|
|
#define MAXPORTS 2
|
|
#define UART_DUMMY_UER_RX 1
|
|
#define DRVNAME "lantiq,asc"
|
|
#ifdef __BIG_ENDIAN
|
|
#define LTQ_ASC_TBUF (0x0020 + 3)
|
|
#define LTQ_ASC_RBUF (0x0024 + 3)
|
|
#else
|
|
#define LTQ_ASC_TBUF 0x0020
|
|
#define LTQ_ASC_RBUF 0x0024
|
|
#endif
|
|
#define LTQ_ASC_FSTAT 0x0048
|
|
#define LTQ_ASC_WHBSTATE 0x0018
|
|
#define LTQ_ASC_STATE 0x0014
|
|
#define LTQ_ASC_IRNCR 0x00F8
|
|
#define LTQ_ASC_CLC 0x0000
|
|
#define LTQ_ASC_ID 0x0008
|
|
#define LTQ_ASC_PISEL 0x0004
|
|
#define LTQ_ASC_TXFCON 0x0044
|
|
#define LTQ_ASC_RXFCON 0x0040
|
|
#define LTQ_ASC_CON 0x0010
|
|
#define LTQ_ASC_BG 0x0050
|
|
#define LTQ_ASC_IRNREN 0x00F4
|
|
|
|
#define ASC_IRNREN_TX 0x1
|
|
#define ASC_IRNREN_RX 0x2
|
|
#define ASC_IRNREN_ERR 0x4
|
|
#define ASC_IRNREN_TX_BUF 0x8
|
|
#define ASC_IRNCR_TIR 0x1
|
|
#define ASC_IRNCR_RIR 0x2
|
|
#define ASC_IRNCR_EIR 0x4
|
|
|
|
#define ASCOPT_CSIZE 0x3
|
|
#define TXFIFO_FL 1
|
|
#define RXFIFO_FL 1
|
|
#define ASCCLC_DISS 0x2
|
|
#define ASCCLC_RMCMASK 0x0000FF00
|
|
#define ASCCLC_RMCOFFSET 8
|
|
#define ASCCON_M_8ASYNC 0x0
|
|
#define ASCCON_M_7ASYNC 0x2
|
|
#define ASCCON_ODD 0x00000020
|
|
#define ASCCON_STP 0x00000080
|
|
#define ASCCON_BRS 0x00000100
|
|
#define ASCCON_FDE 0x00000200
|
|
#define ASCCON_R 0x00008000
|
|
#define ASCCON_FEN 0x00020000
|
|
#define ASCCON_ROEN 0x00080000
|
|
#define ASCCON_TOEN 0x00100000
|
|
#define ASCSTATE_PE 0x00010000
|
|
#define ASCSTATE_FE 0x00020000
|
|
#define ASCSTATE_ROE 0x00080000
|
|
#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
|
|
#define ASCWHBSTATE_CLRREN 0x00000001
|
|
#define ASCWHBSTATE_SETREN 0x00000002
|
|
#define ASCWHBSTATE_CLRPE 0x00000004
|
|
#define ASCWHBSTATE_CLRFE 0x00000008
|
|
#define ASCWHBSTATE_CLRROE 0x00000020
|
|
#define ASCTXFCON_TXFEN 0x0001
|
|
#define ASCTXFCON_TXFFLU 0x0002
|
|
#define ASCTXFCON_TXFITLMASK 0x3F00
|
|
#define ASCTXFCON_TXFITLOFF 8
|
|
#define ASCRXFCON_RXFEN 0x0001
|
|
#define ASCRXFCON_RXFFLU 0x0002
|
|
#define ASCRXFCON_RXFITLMASK 0x3F00
|
|
#define ASCRXFCON_RXFITLOFF 8
|
|
#define ASCFSTAT_RXFFLMASK 0x003F
|
|
#define ASCFSTAT_TXFFLMASK 0x3F00
|
|
#define ASCFSTAT_TXFREEMASK 0x3F000000
|
|
#define ASCFSTAT_TXFREEOFF 24
|
|
|
|
static void lqasc_tx_chars(struct uart_port *port);
|
|
static struct ltq_uart_port *lqasc_port[MAXPORTS];
|
|
static struct uart_driver lqasc_reg;
|
|
static DEFINE_SPINLOCK(ltq_asc_lock);
|
|
|
|
struct ltq_uart_port {
|
|
struct uart_port port;
|
|
/* clock used to derive divider */
|
|
struct clk *fpiclk;
|
|
/* clock gating of the ASC core */
|
|
struct clk *clk;
|
|
unsigned int tx_irq;
|
|
unsigned int rx_irq;
|
|
unsigned int err_irq;
|
|
};
|
|
|
|
static inline struct
|
|
ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
|
|
{
|
|
return container_of(port, struct ltq_uart_port, port);
|
|
}
|
|
|
|
static void
|
|
lqasc_stop_tx(struct uart_port *port)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void
|
|
lqasc_start_tx(struct uart_port *port)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(<q_asc_lock, flags);
|
|
lqasc_tx_chars(port);
|
|
spin_unlock_irqrestore(<q_asc_lock, flags);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
lqasc_stop_rx(struct uart_port *port)
|
|
{
|
|
ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
|
|
}
|
|
|
|
static int
|
|
lqasc_rx_chars(struct uart_port *port)
|
|
{
|
|
struct tty_port *tport = &port->state->port;
|
|
unsigned int ch = 0, rsr = 0, fifocnt;
|
|
|
|
fifocnt = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
|
|
while (fifocnt--) {
|
|
u8 flag = TTY_NORMAL;
|
|
ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
|
|
rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
|
|
& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
|
|
tty_flip_buffer_push(tport);
|
|
port->icount.rx++;
|
|
|
|
/*
|
|
* Note that the error handling code is
|
|
* out of the main execution path
|
|
*/
|
|
if (rsr & ASCSTATE_ANY) {
|
|
if (rsr & ASCSTATE_PE) {
|
|
port->icount.parity++;
|
|
ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
|
|
port->membase + LTQ_ASC_WHBSTATE);
|
|
} else if (rsr & ASCSTATE_FE) {
|
|
port->icount.frame++;
|
|
ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
|
|
port->membase + LTQ_ASC_WHBSTATE);
|
|
}
|
|
if (rsr & ASCSTATE_ROE) {
|
|
port->icount.overrun++;
|
|
ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
|
|
port->membase + LTQ_ASC_WHBSTATE);
|
|
}
|
|
|
|
rsr &= port->read_status_mask;
|
|
|
|
if (rsr & ASCSTATE_PE)
|
|
flag = TTY_PARITY;
|
|
else if (rsr & ASCSTATE_FE)
|
|
flag = TTY_FRAME;
|
|
}
|
|
|
|
if ((rsr & port->ignore_status_mask) == 0)
|
|
tty_insert_flip_char(tport, ch, flag);
|
|
|
|
if (rsr & ASCSTATE_ROE)
|
|
/*
|
|
* Overrun is special, since it's reported
|
|
* immediately, and doesn't affect the current
|
|
* character
|
|
*/
|
|
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
|
|
}
|
|
|
|
if (ch != 0)
|
|
tty_flip_buffer_push(tport);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
lqasc_tx_chars(struct uart_port *port)
|
|
{
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
if (uart_tx_stopped(port)) {
|
|
lqasc_stop_tx(port);
|
|
return;
|
|
}
|
|
|
|
while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
|
|
ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
|
|
if (port->x_char) {
|
|
ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
continue;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
|
|
ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
|
|
port->membase + LTQ_ASC_TBUF);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
}
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
}
|
|
|
|
static irqreturn_t
|
|
lqasc_tx_int(int irq, void *_port)
|
|
{
|
|
unsigned long flags;
|
|
struct uart_port *port = (struct uart_port *)_port;
|
|
spin_lock_irqsave(<q_asc_lock, flags);
|
|
ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
|
|
spin_unlock_irqrestore(<q_asc_lock, flags);
|
|
lqasc_start_tx(port);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t
|
|
lqasc_err_int(int irq, void *_port)
|
|
{
|
|
unsigned long flags;
|
|
struct uart_port *port = (struct uart_port *)_port;
|
|
spin_lock_irqsave(<q_asc_lock, flags);
|
|
/* clear any pending interrupts */
|
|
ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
|
|
ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
|
|
spin_unlock_irqrestore(<q_asc_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t
|
|
lqasc_rx_int(int irq, void *_port)
|
|
{
|
|
unsigned long flags;
|
|
struct uart_port *port = (struct uart_port *)_port;
|
|
spin_lock_irqsave(<q_asc_lock, flags);
|
|
ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
|
|
lqasc_rx_chars(port);
|
|
spin_unlock_irqrestore(<q_asc_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int
|
|
lqasc_tx_empty(struct uart_port *port)
|
|
{
|
|
int status;
|
|
status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
|
|
return status ? 0 : TIOCSER_TEMT;
|
|
}
|
|
|
|
static unsigned int
|
|
lqasc_get_mctrl(struct uart_port *port)
|
|
{
|
|
return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
|
|
}
|
|
|
|
static void
|
|
lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
|
|
{
|
|
}
|
|
|
|
static void
|
|
lqasc_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
}
|
|
|
|
static int
|
|
lqasc_startup(struct uart_port *port)
|
|
{
|
|
struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
|
|
int retval;
|
|
|
|
if (!IS_ERR(ltq_port->clk))
|
|
clk_enable(ltq_port->clk);
|
|
port->uartclk = clk_get_rate(ltq_port->fpiclk);
|
|
|
|
ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
|
|
port->membase + LTQ_ASC_CLC);
|
|
|
|
ltq_w32(0, port->membase + LTQ_ASC_PISEL);
|
|
ltq_w32(
|
|
((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
|
|
ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
|
|
port->membase + LTQ_ASC_TXFCON);
|
|
ltq_w32(
|
|
((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
|
|
| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
|
|
port->membase + LTQ_ASC_RXFCON);
|
|
/* make sure other settings are written to hardware before
|
|
* setting enable bits
|
|
*/
|
|
wmb();
|
|
ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
|
|
ASCCON_ROEN, port->membase + LTQ_ASC_CON);
|
|
|
|
retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
|
|
0, "asc_tx", port);
|
|
if (retval) {
|
|
pr_err("failed to request lqasc_tx_int\n");
|
|
return retval;
|
|
}
|
|
|
|
retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
|
|
0, "asc_rx", port);
|
|
if (retval) {
|
|
pr_err("failed to request lqasc_rx_int\n");
|
|
goto err1;
|
|
}
|
|
|
|
retval = request_irq(ltq_port->err_irq, lqasc_err_int,
|
|
0, "asc_err", port);
|
|
if (retval) {
|
|
pr_err("failed to request lqasc_err_int\n");
|
|
goto err2;
|
|
}
|
|
|
|
ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
|
|
port->membase + LTQ_ASC_IRNREN);
|
|
return 0;
|
|
|
|
err2:
|
|
free_irq(ltq_port->rx_irq, port);
|
|
err1:
|
|
free_irq(ltq_port->tx_irq, port);
|
|
return retval;
|
|
}
|
|
|
|
static void
|
|
lqasc_shutdown(struct uart_port *port)
|
|
{
|
|
struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
|
|
free_irq(ltq_port->tx_irq, port);
|
|
free_irq(ltq_port->rx_irq, port);
|
|
free_irq(ltq_port->err_irq, port);
|
|
|
|
ltq_w32(0, port->membase + LTQ_ASC_CON);
|
|
ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
|
|
port->membase + LTQ_ASC_RXFCON);
|
|
ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
|
|
port->membase + LTQ_ASC_TXFCON);
|
|
if (!IS_ERR(ltq_port->clk))
|
|
clk_disable(ltq_port->clk);
|
|
}
|
|
|
|
static void
|
|
lqasc_set_termios(struct uart_port *port,
|
|
struct ktermios *new, struct ktermios *old)
|
|
{
|
|
unsigned int cflag;
|
|
unsigned int iflag;
|
|
unsigned int divisor;
|
|
unsigned int baud;
|
|
unsigned int con = 0;
|
|
unsigned long flags;
|
|
|
|
cflag = new->c_cflag;
|
|
iflag = new->c_iflag;
|
|
|
|
switch (cflag & CSIZE) {
|
|
case CS7:
|
|
con = ASCCON_M_7ASYNC;
|
|
break;
|
|
|
|
case CS5:
|
|
case CS6:
|
|
default:
|
|
new->c_cflag &= ~ CSIZE;
|
|
new->c_cflag |= CS8;
|
|
con = ASCCON_M_8ASYNC;
|
|
break;
|
|
}
|
|
|
|
cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
|
|
|
|
if (cflag & CSTOPB)
|
|
con |= ASCCON_STP;
|
|
|
|
if (cflag & PARENB) {
|
|
if (!(cflag & PARODD))
|
|
con &= ~ASCCON_ODD;
|
|
else
|
|
con |= ASCCON_ODD;
|
|
}
|
|
|
|
port->read_status_mask = ASCSTATE_ROE;
|
|
if (iflag & INPCK)
|
|
port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
|
|
|
|
port->ignore_status_mask = 0;
|
|
if (iflag & IGNPAR)
|
|
port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
|
|
|
|
if (iflag & IGNBRK) {
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (iflag & IGNPAR)
|
|
port->ignore_status_mask |= ASCSTATE_ROE;
|
|
}
|
|
|
|
if ((cflag & CREAD) == 0)
|
|
port->ignore_status_mask |= UART_DUMMY_UER_RX;
|
|
|
|
/* set error signals - framing, parity and overrun, enable receiver */
|
|
con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
|
|
|
|
spin_lock_irqsave(<q_asc_lock, flags);
|
|
|
|
/* set up CON */
|
|
ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
|
|
|
|
/* Set baud rate - take a divider of 2 into account */
|
|
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
|
|
divisor = uart_get_divisor(port, baud);
|
|
divisor = divisor / 2 - 1;
|
|
|
|
/* disable the baudrate generator */
|
|
ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
|
|
|
|
/* make sure the fractional divider is off */
|
|
ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
|
|
|
|
/* set up to use divisor of 2 */
|
|
ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
|
|
|
|
/* now we can write the new baudrate into the register */
|
|
ltq_w32(divisor, port->membase + LTQ_ASC_BG);
|
|
|
|
/* turn the baudrate generator back on */
|
|
ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
|
|
|
|
/* enable rx */
|
|
ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
|
|
|
|
spin_unlock_irqrestore(<q_asc_lock, flags);
|
|
|
|
/* Don't rewrite B0 */
|
|
if (tty_termios_baud_rate(new))
|
|
tty_termios_encode_baud_rate(new, baud, baud);
|
|
|
|
uart_update_timeout(port, cflag, baud);
|
|
}
|
|
|
|
static const char*
|
|
lqasc_type(struct uart_port *port)
|
|
{
|
|
if (port->type == PORT_LTQ_ASC)
|
|
return DRVNAME;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static void
|
|
lqasc_release_port(struct uart_port *port)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(port->dev);
|
|
|
|
if (port->flags & UPF_IOREMAP) {
|
|
devm_iounmap(&pdev->dev, port->membase);
|
|
port->membase = NULL;
|
|
}
|
|
}
|
|
|
|
static int
|
|
lqasc_request_port(struct uart_port *port)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(port->dev);
|
|
struct resource *res;
|
|
int size;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "cannot obtain I/O memory region");
|
|
return -ENODEV;
|
|
}
|
|
size = resource_size(res);
|
|
|
|
res = devm_request_mem_region(&pdev->dev, res->start,
|
|
size, dev_name(&pdev->dev));
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "cannot request I/O memory region");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (port->flags & UPF_IOREMAP) {
|
|
port->membase = devm_ioremap_nocache(&pdev->dev,
|
|
port->mapbase, size);
|
|
if (port->membase == NULL)
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
lqasc_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE) {
|
|
port->type = PORT_LTQ_ASC;
|
|
lqasc_request_port(port);
|
|
}
|
|
}
|
|
|
|
static int
|
|
lqasc_verify_port(struct uart_port *port,
|
|
struct serial_struct *ser)
|
|
{
|
|
int ret = 0;
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC)
|
|
ret = -EINVAL;
|
|
if (ser->irq < 0 || ser->irq >= NR_IRQS)
|
|
ret = -EINVAL;
|
|
if (ser->baud_base < 9600)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
static const struct uart_ops lqasc_pops = {
|
|
.tx_empty = lqasc_tx_empty,
|
|
.set_mctrl = lqasc_set_mctrl,
|
|
.get_mctrl = lqasc_get_mctrl,
|
|
.stop_tx = lqasc_stop_tx,
|
|
.start_tx = lqasc_start_tx,
|
|
.stop_rx = lqasc_stop_rx,
|
|
.break_ctl = lqasc_break_ctl,
|
|
.startup = lqasc_startup,
|
|
.shutdown = lqasc_shutdown,
|
|
.set_termios = lqasc_set_termios,
|
|
.type = lqasc_type,
|
|
.release_port = lqasc_release_port,
|
|
.request_port = lqasc_request_port,
|
|
.config_port = lqasc_config_port,
|
|
.verify_port = lqasc_verify_port,
|
|
};
|
|
|
|
static void
|
|
lqasc_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
int fifofree;
|
|
|
|
if (!port->membase)
|
|
return;
|
|
|
|
do {
|
|
fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
|
|
& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
|
|
} while (fifofree == 0);
|
|
ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
|
|
}
|
|
|
|
static void lqasc_serial_port_write(struct uart_port *port, const char *s,
|
|
u_int count)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(<q_asc_lock, flags);
|
|
uart_console_write(port, s, count, lqasc_console_putchar);
|
|
spin_unlock_irqrestore(<q_asc_lock, flags);
|
|
}
|
|
|
|
static void
|
|
lqasc_console_write(struct console *co, const char *s, u_int count)
|
|
{
|
|
struct ltq_uart_port *ltq_port;
|
|
|
|
if (co->index >= MAXPORTS)
|
|
return;
|
|
|
|
ltq_port = lqasc_port[co->index];
|
|
if (!ltq_port)
|
|
return;
|
|
|
|
lqasc_serial_port_write(<q_port->port, s, count);
|
|
}
|
|
|
|
static int __init
|
|
lqasc_console_setup(struct console *co, char *options)
|
|
{
|
|
struct ltq_uart_port *ltq_port;
|
|
struct uart_port *port;
|
|
int baud = 115200;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (co->index >= MAXPORTS)
|
|
return -ENODEV;
|
|
|
|
ltq_port = lqasc_port[co->index];
|
|
if (!ltq_port)
|
|
return -ENODEV;
|
|
|
|
port = <q_port->port;
|
|
|
|
if (!IS_ERR(ltq_port->clk))
|
|
clk_enable(ltq_port->clk);
|
|
|
|
port->uartclk = clk_get_rate(ltq_port->fpiclk);
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct console lqasc_console = {
|
|
.name = "ttyLTQ",
|
|
.write = lqasc_console_write,
|
|
.device = uart_console_device,
|
|
.setup = lqasc_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &lqasc_reg,
|
|
};
|
|
|
|
static int __init
|
|
lqasc_console_init(void)
|
|
{
|
|
register_console(&lqasc_console);
|
|
return 0;
|
|
}
|
|
console_initcall(lqasc_console_init);
|
|
|
|
static void lqasc_serial_early_console_write(struct console *co,
|
|
const char *s,
|
|
u_int count)
|
|
{
|
|
struct earlycon_device *dev = co->data;
|
|
|
|
lqasc_serial_port_write(&dev->port, s, count);
|
|
}
|
|
|
|
static int __init
|
|
lqasc_serial_early_console_setup(struct earlycon_device *device,
|
|
const char *opt)
|
|
{
|
|
if (!device->port.membase)
|
|
return -ENODEV;
|
|
|
|
device->con->write = lqasc_serial_early_console_write;
|
|
return 0;
|
|
}
|
|
OF_EARLYCON_DECLARE(lantiq, DRVNAME, lqasc_serial_early_console_setup);
|
|
|
|
static struct uart_driver lqasc_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = DRVNAME,
|
|
.dev_name = "ttyLTQ",
|
|
.major = 0,
|
|
.minor = 0,
|
|
.nr = MAXPORTS,
|
|
.cons = &lqasc_console,
|
|
};
|
|
|
|
static int __init
|
|
lqasc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct ltq_uart_port *ltq_port;
|
|
struct uart_port *port;
|
|
struct resource *mmres, irqres[3];
|
|
int line = 0;
|
|
int ret;
|
|
|
|
mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ret = of_irq_to_resource_table(node, irqres, 3);
|
|
if (!mmres || (ret != 3)) {
|
|
dev_err(&pdev->dev,
|
|
"failed to get memory/irq for serial port\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* check if this is the console port */
|
|
if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC))
|
|
line = 1;
|
|
|
|
if (lqasc_port[line]) {
|
|
dev_err(&pdev->dev, "port %d already allocated\n", line);
|
|
return -EBUSY;
|
|
}
|
|
|
|
ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port),
|
|
GFP_KERNEL);
|
|
if (!ltq_port)
|
|
return -ENOMEM;
|
|
|
|
port = <q_port->port;
|
|
|
|
port->iotype = SERIAL_IO_MEM;
|
|
port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
|
|
port->ops = &lqasc_pops;
|
|
port->fifosize = 16;
|
|
port->type = PORT_LTQ_ASC,
|
|
port->line = line;
|
|
port->dev = &pdev->dev;
|
|
/* unused, just to be backward-compatible */
|
|
port->irq = irqres[0].start;
|
|
port->mapbase = mmres->start;
|
|
|
|
ltq_port->fpiclk = clk_get_fpi();
|
|
if (IS_ERR(ltq_port->fpiclk)) {
|
|
pr_err("failed to get fpi clk\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
/* not all asc ports have clock gates, lets ignore the return code */
|
|
ltq_port->clk = clk_get(&pdev->dev, NULL);
|
|
|
|
ltq_port->tx_irq = irqres[0].start;
|
|
ltq_port->rx_irq = irqres[1].start;
|
|
ltq_port->err_irq = irqres[2].start;
|
|
|
|
lqasc_port[line] = ltq_port;
|
|
platform_set_drvdata(pdev, ltq_port);
|
|
|
|
ret = uart_add_one_port(&lqasc_reg, port);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id ltq_asc_match[] = {
|
|
{ .compatible = DRVNAME },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver lqasc_driver = {
|
|
.driver = {
|
|
.name = DRVNAME,
|
|
.of_match_table = ltq_asc_match,
|
|
},
|
|
};
|
|
|
|
int __init
|
|
init_lqasc(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = uart_register_driver(&lqasc_reg);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
ret = platform_driver_probe(&lqasc_driver, lqasc_probe);
|
|
if (ret != 0)
|
|
uart_unregister_driver(&lqasc_reg);
|
|
|
|
return ret;
|
|
}
|
|
device_initcall(init_lqasc);
|