78 lines
2.2 KiB
Plaintext
Executable file
78 lines
2.2 KiB
Plaintext
Executable file
* APM X-Gene 6.0 Gb/s SATA host controller nodes
|
|
|
|
SATA host controller nodes are defined to describe on-chip Serial ATA
|
|
controllers. Each SATA controller (pair of ports) have its own node.
|
|
|
|
Required properties:
|
|
- compatible : Shall contain:
|
|
* "apm,xgene-ahci"
|
|
- reg : First memory resource shall be the AHCI memory
|
|
resource.
|
|
Second memory resource shall be the host controller
|
|
core memory resource.
|
|
Third memory resource shall be the host controller
|
|
diagnostic memory resource.
|
|
4th memory resource shall be the host controller
|
|
AXI memory resource.
|
|
5th optional memory resource shall be the host
|
|
controller MUX memory resource if required.
|
|
- interrupts : Interrupt-specifier for SATA host controller IRQ.
|
|
- clocks : Reference to the clock entry.
|
|
- phys : A list of phandles + phy-specifiers, one for each
|
|
entry in phy-names.
|
|
- phy-names : Should contain:
|
|
* "sata-phy" for the SATA 6.0Gbps PHY
|
|
|
|
Optional properties:
|
|
- dma-coherent : Present if dma operations are coherent
|
|
- status : Shall be "ok" if enabled or "disabled" if disabled.
|
|
Default is "ok".
|
|
|
|
Example:
|
|
sataclk: sataclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <1>;
|
|
clock-frequency = <100000000>;
|
|
clock-output-names = "sataclk";
|
|
};
|
|
|
|
phy2: phy@1f22a000 {
|
|
compatible = "apm,xgene-phy";
|
|
reg = <0x0 0x1f22a000 0x0 0x100>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
phy3: phy@1f23a000 {
|
|
compatible = "apm,xgene-phy";
|
|
reg = <0x0 0x1f23a000 0x0 0x100>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
sata2: sata@1a400000 {
|
|
compatible = "apm,xgene-ahci";
|
|
reg = <0x0 0x1a400000 0x0 0x1000>,
|
|
<0x0 0x1f220000 0x0 0x1000>,
|
|
<0x0 0x1f22d000 0x0 0x1000>,
|
|
<0x0 0x1f22e000 0x0 0x1000>,
|
|
<0x0 0x1f227000 0x0 0x1000>;
|
|
interrupts = <0x0 0x87 0x4>;
|
|
dma-coherent;
|
|
clocks = <&sataclk 0>;
|
|
phys = <&phy2 0>;
|
|
phy-names = "sata-phy";
|
|
};
|
|
|
|
sata3: sata@1a800000 {
|
|
compatible = "apm,xgene-ahci-pcie";
|
|
reg = <0x0 0x1a800000 0x0 0x1000>,
|
|
<0x0 0x1f230000 0x0 0x1000>,
|
|
<0x0 0x1f23d000 0x0 0x1000>,
|
|
<0x0 0x1f23e000 0x0 0x1000>,
|
|
<0x0 0x1f237000 0x0 0x1000>;
|
|
interrupts = <0x0 0x88 0x4>;
|
|
dma-coherent;
|
|
clocks = <&sataclk 0>;
|
|
phys = <&phy3 0>;
|
|
phy-names = "sata-phy";
|
|
};
|