97 lines
2.4 KiB
Plaintext
Executable file
97 lines
2.4 KiB
Plaintext
Executable file
Binding for TI DaVinci PLL Controllers
|
|
|
|
The PLL provides clocks to most of the components on the SoC. In addition
|
|
to the PLL itself, this controller also contains bypasses, gates, dividers,
|
|
an multiplexers for various clock signals.
|
|
|
|
Required properties:
|
|
- compatible: shall be one of:
|
|
- "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
|
|
- "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
|
|
- reg: physical base address and size of the controller's register area.
|
|
- clocks: phandles corresponding to the clock names
|
|
- clock-names: names of the clock sources - depends on compatible string
|
|
- for "ti,da850-pll0", shall be "clksrc", "extclksrc"
|
|
- for "ti,da850-pll1", shall be "clksrc"
|
|
|
|
Optional properties:
|
|
- ti,clkmode-square-wave: Indicates that the the board is supplying a square
|
|
wave input on the OSCIN pin instead of using a crystal oscillator.
|
|
This property is only valid when compatible = "ti,da850-pll0".
|
|
|
|
|
|
Optional child nodes:
|
|
|
|
pllout
|
|
Describes the main PLL clock output (before POSTDIV). The node name must
|
|
be "pllout".
|
|
|
|
Required properties:
|
|
- #clock-cells: shall be 0
|
|
|
|
sysclk
|
|
Describes the PLLDIVn divider clocks that provide the SYSCLKn clock
|
|
domains. The node name must be "sysclk". Consumers of this node should
|
|
use "n" in "SYSCLKn" as the index parameter for the clock cell.
|
|
|
|
Required properties:
|
|
- #clock-cells: shall be 1
|
|
|
|
auxclk
|
|
Describes the AUXCLK output of the PLL. The node name must be "auxclk".
|
|
This child node is only valid when compatible = "ti,da850-pll0".
|
|
|
|
Required properties:
|
|
- #clock-cells: shall be 0
|
|
|
|
obsclk
|
|
Describes the OBSCLK output of the PLL. The node name must be "obsclk".
|
|
|
|
Required properties:
|
|
- #clock-cells: shall be 0
|
|
|
|
|
|
Examples:
|
|
|
|
pll0: clock-controller@11000 {
|
|
compatible = "ti,da850-pll0";
|
|
reg = <0x11000 0x1000>;
|
|
clocks = <&ref_clk>, <&pll1_sysclk 3>;
|
|
clock-names = "clksrc", "extclksrc";
|
|
ti,clkmode-square-wave;
|
|
|
|
pll0_pllout: pllout {
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
pll0_sysclk: sysclk {
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pll0_auxclk: auxclk {
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
pll0_obsclk: obsclk {
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
pll1: clock-controller@21a000 {
|
|
compatible = "ti,da850-pll1";
|
|
reg = <0x21a000 0x1000>;
|
|
clocks = <&ref_clk>;
|
|
clock-names = "clksrc";
|
|
|
|
pll0_sysclk: sysclk {
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pll0_obsclk: obsclk {
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
Also see:
|
|
- Documentation/devicetree/bindings/clock/clock-bindings.txt
|