158 lines
4.3 KiB
Plaintext
Executable file
158 lines
4.3 KiB
Plaintext
Executable file
SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
|
|
Currently Freescale powerpc chip C29X is embedded with SEC 6.
|
|
SEC 6 device tree binding include:
|
|
-SEC 6 Node
|
|
-Job Ring Node
|
|
-Full Example
|
|
|
|
=====================================================================
|
|
SEC 6 Node
|
|
|
|
Description
|
|
|
|
Node defines the base address of the SEC 6 block.
|
|
This block specifies the address range of all global
|
|
configuration registers for the SEC 6 block.
|
|
For example, In C293, we could see three SEC 6 node.
|
|
|
|
PROPERTIES
|
|
|
|
- compatible
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: Must include "fsl,sec-v6.0".
|
|
|
|
- fsl,sec-era
|
|
Usage: optional
|
|
Value type: <u32>
|
|
Definition: A standard property. Define the 'ERA' of the SEC
|
|
device.
|
|
|
|
- #address-cells
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: A standard property. Defines the number of cells
|
|
for representing physical addresses in child nodes.
|
|
|
|
- #size-cells
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: A standard property. Defines the number of cells
|
|
for representing the size of physical addresses in
|
|
child nodes.
|
|
|
|
- reg
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: A standard property. Specifies the physical
|
|
address and length of the SEC 6 configuration registers.
|
|
|
|
- ranges
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: A standard property. Specifies the physical address
|
|
range of the SEC 6.0 register space (-SNVS not included). A
|
|
triplet that includes the child address, parent address, &
|
|
length.
|
|
|
|
Note: All other standard properties (see the Devicetree Specification)
|
|
are allowed but are optional.
|
|
|
|
EXAMPLE
|
|
crypto@a0000 {
|
|
compatible = "fsl,sec-v6.0";
|
|
fsl,sec-era = <6>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xa0000 0x20000>;
|
|
ranges = <0 0xa0000 0x20000>;
|
|
};
|
|
|
|
=====================================================================
|
|
Job Ring (JR) Node
|
|
|
|
Child of the crypto node defines data processing interface to SEC 6
|
|
across the peripheral bus for purposes of processing
|
|
cryptographic descriptors. The specified address
|
|
range can be made visible to one (or more) cores.
|
|
The interrupt defined for this node is controlled within
|
|
the address range of this node.
|
|
|
|
- compatible
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: Must include "fsl,sec-v6.0-job-ring".
|
|
|
|
- reg
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: Specifies a two JR parameters: an offset from
|
|
the parent physical address and the length the JR registers.
|
|
|
|
- interrupts
|
|
Usage: required
|
|
Value type: <prop_encoded-array>
|
|
Definition: Specifies the interrupts generated by this
|
|
device. The value of the interrupts property
|
|
consists of one interrupt specifier. The format
|
|
of the specifier is defined by the binding document
|
|
describing the node's interrupt parent.
|
|
|
|
EXAMPLE
|
|
jr@1000 {
|
|
compatible = "fsl,sec-v6.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <49 2 0 0>;
|
|
};
|
|
|
|
===================================================================
|
|
Full Example
|
|
|
|
Since some chips may contain more than one SEC, the dtsi contains
|
|
only the node contents, not the node itself. A chip using the SEC
|
|
should include the dtsi inside each SEC node. Example:
|
|
|
|
In qoriq-sec6.0.dtsi:
|
|
|
|
compatible = "fsl,sec-v6.0";
|
|
fsl,sec-era = <6>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
jr@1000 {
|
|
compatible = "fsl,sec-v6.0-job-ring",
|
|
"fsl,sec-v5.2-job-ring",
|
|
"fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.4-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
};
|
|
|
|
jr@2000 {
|
|
compatible = "fsl,sec-v6.0-job-ring",
|
|
"fsl,sec-v5.2-job-ring",
|
|
"fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.4-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x2000 0x1000>;
|
|
};
|
|
|
|
In the C293 device tree, we add the include of public property:
|
|
|
|
crypto@a0000 {
|
|
/include/ "qoriq-sec6.0.dtsi"
|
|
}
|
|
|
|
crypto@a0000 {
|
|
reg = <0xa0000 0x20000>;
|
|
ranges = <0 0xa0000 0x20000>;
|
|
|
|
jr@1000 {
|
|
interrupts = <49 2 0 0>;
|
|
};
|
|
|
|
jr@2000 {
|
|
interrupts = <50 2 0 0>;
|
|
};
|
|
};
|