159 lines
3.9 KiB
Plaintext
Executable file
159 lines
3.9 KiB
Plaintext
Executable file
Qualcomm adreno/snapdragon MDP5 display controller
|
|
|
|
Description:
|
|
|
|
This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
|
|
encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
|
|
controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
|
|
|
|
MDSS:
|
|
Required properties:
|
|
- compatible:
|
|
* "qcom,mdss" - MDSS
|
|
- reg: Physical base address and length of the controller's registers.
|
|
- reg-names: The names of register regions. The following regions are required:
|
|
* "mdss_phys"
|
|
* "vbif_phys"
|
|
- interrupts: The interrupt signal from MDSS.
|
|
- interrupt-controller: identifies the node as an interrupt controller.
|
|
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
|
|
source, should be 1.
|
|
- power-domains: a power domain consumer specifier according to
|
|
Documentation/devicetree/bindings/power/power_domain.txt
|
|
- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: the following clocks are required.
|
|
* "iface"
|
|
* "bus"
|
|
* "vsync"
|
|
- #address-cells: number of address cells for the MDSS children. Should be 1.
|
|
- #size-cells: Should be 1.
|
|
- ranges: parent bus address space is the same as the child bus address space.
|
|
|
|
Optional properties:
|
|
- clock-names: the following clocks are optional:
|
|
* "lut"
|
|
|
|
MDP5:
|
|
Required properties:
|
|
- compatible:
|
|
* "qcom,mdp5" - MDP5
|
|
- reg: Physical base address and length of the controller's registers.
|
|
- reg-names: The names of register regions. The following regions are required:
|
|
* "mdp_phys"
|
|
- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
|
|
- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: the following clocks are required.
|
|
- * "bus"
|
|
- * "iface"
|
|
- * "core"
|
|
- * "vsync"
|
|
- ports: contains the list of output ports from MDP. These connect to interfaces
|
|
that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
|
|
special case since it is a part of the MDP block itself).
|
|
|
|
Each output port contains an endpoint that describes how it is connected to an
|
|
external interface. These are described by the standard properties documented
|
|
here:
|
|
Documentation/devicetree/bindings/graph.txt
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
|
|
The availability of output ports can vary across SoC revisions:
|
|
|
|
For MSM8974 and APQ8084:
|
|
Port 0 -> MDP_INTF0 (eDP)
|
|
Port 1 -> MDP_INTF1 (DSI1)
|
|
Port 2 -> MDP_INTF2 (DSI2)
|
|
Port 3 -> MDP_INTF3 (HDMI)
|
|
|
|
For MSM8916:
|
|
Port 0 -> MDP_INTF1 (DSI1)
|
|
|
|
For MSM8994 and MSM8996:
|
|
Port 0 -> MDP_INTF1 (DSI1)
|
|
Port 1 -> MDP_INTF2 (DSI2)
|
|
Port 2 -> MDP_INTF3 (HDMI)
|
|
|
|
Optional properties:
|
|
- clock-names: the following clocks are optional:
|
|
* "lut"
|
|
|
|
Example:
|
|
|
|
/ {
|
|
...
|
|
|
|
mdss: mdss@1a00000 {
|
|
compatible = "qcom,mdss";
|
|
reg = <0x1a00000 0x1000>,
|
|
<0x1ac8000 0x3000>;
|
|
reg-names = "mdss_phys", "vbif_phys";
|
|
|
|
power-domains = <&gcc MDSS_GDSC>;
|
|
|
|
clocks = <&gcc GCC_MDSS_AHB_CLK>,
|
|
<&gcc GCC_MDSS_AXI_CLK>,
|
|
<&gcc GCC_MDSS_VSYNC_CLK>;
|
|
clock-names = "iface",
|
|
"bus",
|
|
"vsync"
|
|
|
|
interrupts = <0 72 0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mdp: mdp@1a01000 {
|
|
compatible = "qcom,mdp5";
|
|
reg = <0x1a01000 0x90000>;
|
|
reg-names = "mdp_phys";
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <0 0>;
|
|
|
|
clocks = <&gcc GCC_MDSS_AHB_CLK>,
|
|
<&gcc GCC_MDSS_AXI_CLK>,
|
|
<&gcc GCC_MDSS_MDP_CLK>,
|
|
<&gcc GCC_MDSS_VSYNC_CLK>;
|
|
clock-names = "iface",
|
|
"bus",
|
|
"core",
|
|
"vsync";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
mdp5_intf1_out: endpoint {
|
|
remote-endpoint = <&dsi0_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi0: dsi@1a98000 {
|
|
...
|
|
ports {
|
|
...
|
|
port@0 {
|
|
reg = <0>;
|
|
dsi0_in: endpoint {
|
|
remote-endpoint = <&mdp5_intf1_out>;
|
|
};
|
|
};
|
|
...
|
|
};
|
|
...
|
|
};
|
|
|
|
dsi_phy0: dsi-phy@1a98300 {
|
|
...
|
|
};
|
|
};
|
|
};
|